Age | Commit message (Collapse) | Author |
|
In the case when KMs have no listeners, km_query() will fail and
temporary SAs are garbage collected immediately after their allocation.
This causes strain on memory allocation, leading even to OOM since
temporary SA alloc/free cycle is performed for every packet
and garbage collection does not keep up the pace.
The sane thing to do is to make sure we have audience before
temporary SA allocation.
Signed-off-by: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Change-Id: I241fdd8133f4974aaf14a9bc12be089aaa1730ae
Reviewed-on: http://git.am.freescale.net:8181/12383
Reviewed-by: Marian Cristian Rotariu <marian.rotariu@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>
Tested-by: Jose Rivera <German.Rivera@freescale.com>
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
Conflicts:
arch/sparc/Kconfig
drivers/tty/tty_buffer.c
|
|
The csum_tcpudp_magic argument requires a __be32 type while
‘union inet_addr’ type was passed in.
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
Change-Id: I3406f7b997d31b516df43f873908886fcc91c06b
Reviewed-on: http://git.am.freescale.net:8181/11809
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tiefei Zang <tie-fei.zang@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>
|
|
commit 5981a8821b774ada0be512fd9bad7c241e17657e upstream.
This patch fixes authentication failure on LE link re-connection when
BlueZ acts as slave (peripheral). LTK is removed from the internal list
after its first use causing PIN or Key missing reply when re-connecting
the link. The LE Long Term Key Request event indicates that the master
is attempting to encrypt or re-encrypt the link.
Pre-condition: BlueZ host paired and running as slave.
How to reproduce(master):
1) Establish an ACL LE encrypted link
2) Disconnect the link
3) Try to re-establish the ACL LE encrypted link (fails)
> HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 64
Role: Slave (0x01)
...
@ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000
> HCI Event: LE Meta Event (0x3e) plen 13
LE Long Term Key Request (0x05)
Handle: 64
Random number: 875be18439d9aa37
Encryption diversifier: 0x76ed
< HCI Command: LE Long Term Key Request Reply (0x08|0x001a) plen 18
Handle: 64
Long term key: 2aa531db2fce9f00a0569c7d23d17409
> HCI Event: Command Complete (0x0e) plen 6
LE Long Term Key Request Reply (0x08|0x001a) ncmd 1
Status: Success (0x00)
Handle: 64
> HCI Event: Encryption Change (0x08) plen 4
Status: Success (0x00)
Handle: 64
Encryption: Enabled with AES-CCM (0x01)
...
@ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 3
< HCI Command: LE Set Advertise Enable (0x08|0x000a) plen 1
Advertising: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertise Enable (0x08|0x000a) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19
LE Connection Complete (0x01)
Status: Success (0x00)
Handle: 64
Role: Slave (0x01)
...
@ Device Connected: 00:02:72:DC:29:C9 (1) flags 0x0000
> HCI Event: LE Meta Event (0x3e) plen 13
LE Long Term Key Request (0x05)
Handle: 64
Random number: 875be18439d9aa37
Encryption diversifier: 0x76ed
< HCI Command: LE Long Term Key Request Neg Reply (0x08|0x001b) plen 2
Handle: 64
> HCI Event: Command Complete (0x0e) plen 6
LE Long Term Key Request Neg Reply (0x08|0x001b) ncmd 1
Status: Success (0x00)
Handle: 64
> HCI Event: Disconnect Complete (0x05) plen 4
Status: Success (0x00)
Handle: 64
Reason: Authentication Failure (0x05)
@ Device Disconnected: 00:02:72:DC:29:C9 (1) reason 0
Signed-off-by: Claudio Takahasi <claudio.takahasi@openbossa.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b04c46190219a4f845e46a459e3102137b7f6cac upstream.
Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Signed-off-by: xiaoming wang <xiaoming.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit b07c26511e94ab856f3700c56d582c0da36d5b4d upstream.
The combination of two commits:
commit 8e4e1713e4
("openvswitch: Simplify datapath locking.")
commit 2537b4dd0a
("openvswitch:: link upper device for port devices")
introduced a bug where upper_dev wasn't unlinked upon
netdev_unregister notification
The following steps:
modprobe openvswitch
ovs-dpctl add-dp test
ip tuntap add dev tap1 mode tap
ovs-dpctl add-if test tap1
ip tuntap del dev tap1 mode tap
are causing multiple warnings:
[ 62.747557] gre: GRE over IPv4 demultiplexor driver
[ 62.749579] openvswitch: Open vSwitch switching datapath
[ 62.755087] device test entered promiscuous mode
[ 62.765911] device tap1 entered promiscuous mode
[ 62.766033] IPv6: ADDRCONF(NETDEV_UP): tap1: link is not ready
[ 62.769017] ------------[ cut here ]------------
[ 62.769022] WARNING: CPU: 1 PID: 3267 at net/core/dev.c:5501 rollback_registered_many+0x20f/0x240()
[ 62.769023] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769051] CPU: 1 PID: 3267 Comm: ip Not tainted 3.12.0-rc3+ #60
[ 62.769052] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769053] 0000000000000009 ffff8807f25cbd28 ffffffff8175e575 0000000000000006
[ 62.769055] 0000000000000000 ffff8807f25cbd68 ffffffff8105314c ffff8807f25cbd58
[ 62.769057] ffff8807f2634000 ffff8807f25cbdc8 ffff8807f25cbd88 ffff8807f25cbdc8
[ 62.769059] Call Trace:
[ 62.769062] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769065] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769067] [<ffffffff8105319a>] warn_slowpath_null+0x1a/0x20
[ 62.769069] [<ffffffff8162a04f>] rollback_registered_many+0x20f/0x240
[ 62.769071] [<ffffffff8162a101>] rollback_registered+0x31/0x40
[ 62.769073] [<ffffffff8162a488>] unregister_netdevice_queue+0x58/0x90
[ 62.769075] [<ffffffff8154f900>] __tun_detach+0x140/0x340
[ 62.769077] [<ffffffff8154fb36>] tun_chr_close+0x36/0x60
[ 62.769080] [<ffffffff811bddaf>] __fput+0xff/0x260
[ 62.769082] [<ffffffff811bdf5e>] ____fput+0xe/0x10
[ 62.769084] [<ffffffff8107b515>] task_work_run+0xb5/0xe0
[ 62.769087] [<ffffffff810029b9>] do_notify_resume+0x59/0x80
[ 62.769089] [<ffffffff813a41fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[ 62.769091] [<ffffffff81770f5a>] int_signal+0x12/0x17
[ 62.769093] ---[ end trace 838756c62e156ffb ]---
[ 62.769481] ------------[ cut here ]------------
[ 62.769485] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[ 62.769486] sysfs: can not remove 'master', no directory
[ 62.769486] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769514] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60
[ 62.769515] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769518] Workqueue: events ovs_dp_notify_wq [openvswitch]
[ 62.769519] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[ 62.769521] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b28
[ 62.769523] 0000000000000000 ffffffff81a87a1f ffff8807f2634000 ffff880037038500
[ 62.769525] Call Trace:
[ 62.769528] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769529] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769531] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[ 62.769533] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[ 62.769535] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[ 62.769538] [<ffffffff81631ef7>] __netdev_adjacent_dev_remove+0xf7/0x150
[ 62.769540] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[ 62.769542] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[ 62.769544] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[ 62.769548] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[ 62.769550] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[ 62.769552] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[ 62.769555] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[ 62.769557] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[ 62.769559] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[ 62.769562] [<ffffffff8107659b>] worker_thread+0x11b/0x370
[ 62.769564] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[ 62.769566] [<ffffffff8107f44a>] kthread+0xea/0xf0
[ 62.769568] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769570] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[ 62.769572] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769573] ---[ end trace 838756c62e156ffc ]---
[ 62.769574] ------------[ cut here ]------------
[ 62.769576] WARNING: CPU: 1 PID: 92 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
[ 62.769577] sysfs: can not remove 'upper_test', no directory
[ 62.769577] Modules linked in: openvswitch gre vxlan ip_tunnel libcrc32c ip6table_filter ip6_tables ebtable_nat ebtables nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_CHECKSUM iptable_mangle ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp llc vhost_net macvtap macvlan vhost kvm_intel kvm dm_crypt iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi hid_generic mxm_wmi eeepc_wmi asus_wmi sparse_keymap dm_multipath psmouse serio_raw usbhid hid parport_pc ppdev firewire_ohci lpc_ich firewire_core e1000e crc_itu_t binfmt_misc igb dca ptp pps_core mac_hid wmi lp parport i2o_config i2o_block video
[ 62.769603] CPU: 1 PID: 92 Comm: kworker/1:2 Tainted: G W 3.12.0-rc3+ #60
[ 62.769604] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012
[ 62.769606] Workqueue: events ovs_dp_notify_wq [openvswitch]
[ 62.769607] 0000000000000009 ffff880807ad3ac8 ffffffff8175e575 0000000000000006
[ 62.769609] ffff880807ad3b18 ffff880807ad3b08 ffffffff8105314c ffff880807ad3b58
[ 62.769611] 0000000000000000 ffff880807ad3bd9 ffff8807f2634000 ffff880037038500
[ 62.769613] Call Trace:
[ 62.769615] [<ffffffff8175e575>] dump_stack+0x55/0x76
[ 62.769617] [<ffffffff8105314c>] warn_slowpath_common+0x8c/0xc0
[ 62.769619] [<ffffffff81053236>] warn_slowpath_fmt+0x46/0x50
[ 62.769621] [<ffffffff8123e7e9>] sysfs_hash_and_remove+0xa9/0xb0
[ 62.769622] [<ffffffff81240e96>] sysfs_remove_link+0x26/0x30
[ 62.769624] [<ffffffff81631f22>] __netdev_adjacent_dev_remove+0x122/0x150
[ 62.769627] [<ffffffff81632037>] __netdev_adjacent_dev_unlink_lists+0x27/0x50
[ 62.769629] [<ffffffff8163213a>] __netdev_adjacent_dev_unlink_neighbour+0x3a/0x50
[ 62.769631] [<ffffffff8163218d>] netdev_upper_dev_unlink+0x3d/0x140
[ 62.769633] [<ffffffffa033c2db>] netdev_destroy+0x4b/0x80 [openvswitch]
[ 62.769636] [<ffffffffa033b696>] ovs_vport_del+0x46/0x60 [openvswitch]
[ 62.769638] [<ffffffffa0335314>] ovs_dp_detach_port+0x44/0x60 [openvswitch]
[ 62.769640] [<ffffffffa0336574>] ovs_dp_notify_wq+0xb4/0x150 [openvswitch]
[ 62.769642] [<ffffffff81075c28>] process_one_work+0x1d8/0x6a0
[ 62.769644] [<ffffffff81075bc8>] ? process_one_work+0x178/0x6a0
[ 62.769646] [<ffffffff8107659b>] worker_thread+0x11b/0x370
[ 62.769648] [<ffffffff81076480>] ? rescuer_thread+0x350/0x350
[ 62.769650] [<ffffffff8107f44a>] kthread+0xea/0xf0
[ 62.769652] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769654] [<ffffffff81770bac>] ret_from_fork+0x7c/0xb0
[ 62.769656] [<ffffffff8107f360>] ? flush_kthread_worker+0x150/0x150
[ 62.769657] ---[ end trace 838756c62e156ffd ]---
[ 62.769724] device tap1 left promiscuous mode
This patch also affects moving devices between net namespaces.
OVS used to ignore netns move notifications which caused problems.
Like:
ovs-dpctl add-if test tap1
ip link set tap1 netns 3512
and then removing tap1 inside the namespace will cause hang on missing dev_put.
With this patch OVS will detach dev upon receiving netns move event.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit bf39b4247b8799935ea91d90db250ab608a58e50 ]
Binding might result in a NULL device which is later dereferenced
without checking.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 43a43b6040165f7b40b5b489fe61a4cb7f8c4980 ]
After commit c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify
processing to workqueue") some counters are now updated in process context
and thus need to disable bh before doing so, otherwise deadlocks can
happen on 32-bit archs. Fabio Estevam noticed this while while mounting
a NFS volume on an ARM board.
As a compensation for missing this I looked after the other *_STATS_BH
and found three other calls which need updating:
1) icmp6_send: ip6_fragment -> icmpv6_send -> icmp6_send (error handling)
2) ip6_push_pending_frames: rawv6_sendmsg -> rawv6_push_pending_frames -> ...
(only in case of icmp protocol with raw sockets in error handling)
3) ping6_v6_sendmsg (error handling)
Fixes: c15b1ccadb323ea ("ipv6: move DAD and addrconf_verify processing to workqueue")
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit fc0d48b8fb449ca007b2057328abf736cb516168 ]
Currently, if the card supports CTAG acceleration we do not
account for the vlan header even if we are configuring an
8021AD vlan. This may not be best since we'll do software
tagging for 8021AD which will cause data copy on skb head expansion
Configure the length based on available hw offload capabilities and
vlan protocol.
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit fbd02dd405d0724a0f25897ed4a6813297c9b96f ]
Commit 10ddceb22ba (ip_tunnel:multicast process cause panic due
to skb->_skb_refdst NULL pointer) removed dst-drop call from
ip-tunnel-recv.
Following commit reintroduce dst-drop and fix the original bug by
checking loopback packet before releasing dst.
Original bug: https://bugzilla.kernel.org/show_bug.cgi?id=70681
CC: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit a5d0e7c037119484a7006b883618bfa87996cb41 ]
If a topology event subscription fails for any reason, such as out
of memory, max number reached or because we received an invalid
request the correct behavior is to terminate the subscribers
connection to the topology server. This is currently broken and
produces the following oops:
[27.953662] tipc: Subscription rejected, illegal request
[27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6
[27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1
[27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5
[27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc]
[27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050
[27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a
[27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520
[27.964023] Call Trace:
[27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56
[27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91
[27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26
[27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140
[27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20
[27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc]
[27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc]
[27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc]
[27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc]
[27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc]
[27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc]
[27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0
[27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0
[27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0
[27.973622] [<ffffffff810648af>] kthread+0xdf/0x100
[27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
[27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0
[27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0
The recursion occurs when subscr_terminate tries to grab the
subscriber lock, which is already taken by subscr_conn_msg_event.
We fix this by checking if the request to establish a new
subscription was successful, and if not we initiate termination of
the subscriber after we have released the subscriber lock.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Not applicable upstream commit, the code here has been removed
upstream. ]
Neighbor Solicitation is ipv6 protocol, so we should check
skb->protocol with ETH_P_IPV6
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Cc: WANG Cong <amwang@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit f518338b16038beeb73e155e60d0f70beb9379f4 ]
Commit 812e44dd1829 ("ip6mr: advertise new mfc entries via rtnl") reuses the
function ip6mr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 65886f439ab0fdc2dff20d1fa87afb98c6717472 ]
Commit 8cd3ac9f9b7b ("ipmr: advertise new mfc entries via rtnl") reuses the
function ipmr_fill_mroute() to notify mfc events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 1c104a6bebf3c16b6248408b84f91d09ac8a26b6 ]
Commit 3ff661c38c84 ("net: rtnetlink notify events for FDB NTF_SELF adds and
deletes") reuses the function nlmsg_populate_fdb_fill() to notify fdb events.
But this function was used only for dump and thus was always setting the
flag NLM_F_MULTI, which is wrong in case of a single notification.
Libraries like libnl will wait forever for NLMSG_DONE.
CC: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit e367c2d03dba4c9bcafad24688fadb79dd95b218 ]
In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74
said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.
when I test through ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)
which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)
so delete the min() when change back the mtu.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit ecab67015ef6e3f3635551dcc9971cf363cc1cd5 ]
tmp_prefered_lft is an offset to ifp->tstamp, not now. Therefore
age needs to be added to the condition.
Age calculation in ipv6_create_tempaddr is different from the one
in addrconf_verify and doesn't consider ADDRCONF_TIMER_FUZZ_MINUS.
This can cause age in ipv6_create_tempaddr to be less than the one
in addrconf_verify and therefore unnecessary temporary address to
be generated.
Use age calculation as in addrconf_modify to avoid this.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit dbb490b96584d4e958533fb637f08b557f505657 ]
When copying in a struct msghdr from the user, if the user has set the
msg_namelen parameter to a negative value it gets clamped to a valid
size due to a comparison between signed and unsigned values.
Ensure the syscall errors when the user passes in a negative value.
Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 20a599bec95a52fa72432b2376a2ce47c5bb68fb ]
Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.
With this patch the snooping code is enabled upon receiving valid,
general queries only.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 9ed973cc40c588abeaa58aea0683ea665132d11d ]
General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.
Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit c3f9b01849ef3bc69024990092b9f42e20df7797 ]
Lars Persson reported following deadlock :
-000 |M:0x0:0x802B6AF8(asm) <-- arch_spin_lock
-001 |tcp_v4_rcv(skb = 0x8BD527A0) <-- sk = 0x8BE6B2A0
-002 |ip_local_deliver_finish(skb = 0x8BD527A0)
-003 |__netif_receive_skb_core(skb = 0x8BD527A0, ?)
-004 |netif_receive_skb(skb = 0x8BD527A0)
-005 |elk_poll(napi = 0x8C770500, budget = 64)
-006 |net_rx_action(?)
-007 |__do_softirq()
-008 |do_softirq()
-009 |local_bh_enable()
-010 |tcp_rcv_established(sk = 0x8BE6B2A0, skb = 0x87D3A9E0, th = 0x814EBE14, ?)
-011 |tcp_v4_do_rcv(sk = 0x8BE6B2A0, skb = 0x87D3A9E0)
-012 |tcp_delack_timer_handler(sk = 0x8BE6B2A0)
-013 |tcp_release_cb(sk = 0x8BE6B2A0)
-014 |release_sock(sk = 0x8BE6B2A0)
-015 |tcp_sendmsg(?, sk = 0x8BE6B2A0, ?, ?)
-016 |sock_sendmsg(sock = 0x8518C4C0, msg = 0x87D8DAA8, size = 4096)
-017 |kernel_sendmsg(?, ?, ?, ?, size = 4096)
-018 |smb_send_kvec()
-019 |smb_send_rqst(server = 0x87C4D400, rqst = 0x87D8DBA0)
-020 |cifs_call_async()
-021 |cifs_async_writev(wdata = 0x87FD6580)
-022 |cifs_writepages(mapping = 0x852096E4, wbc = 0x87D8DC88)
-023 |__writeback_single_inode(inode = 0x852095D0, wbc = 0x87D8DC88)
-024 |writeback_sb_inodes(sb = 0x87D6D800, wb = 0x87E4A9C0, work = 0x87D8DD88)
-025 |__writeback_inodes_wb(wb = 0x87E4A9C0, work = 0x87D8DD88)
-026 |wb_writeback(wb = 0x87E4A9C0, work = 0x87D8DD88)
-027 |wb_do_writeback(wb = 0x87E4A9C0, force_wait = 0)
-028 |bdi_writeback_workfn(work = 0x87E4A9CC)
-029 |process_one_work(worker = 0x8B045880, work = 0x87E4A9CC)
-030 |worker_thread(__worker = 0x8B045880)
-031 |kthread(_create = 0x87CADD90)
-032 |ret_from_kernel_thread(asm)
Bug occurs because __tcp_checksum_complete_user() enables BH, assuming
it is running from softirq context.
Lars trace involved a NIC without RX checksum support but other points
are problematic as well, like the prequeue stuff.
Problem is triggered by a timer, that found socket being owned by user.
tcp_release_cb() should call tcp_write_timer_handler() or
tcp_delack_timer_handler() in the appropriate context :
BH disabled and socket lock held, but 'owned' field cleared,
as if they were running from timer handlers.
Fixes: 6f458dfb4092 ("tcp: improve latencies of timer triggered events")
Reported-by: Lars Persson <lars.persson@axis.com>
Tested-by: Lars Persson <lars.persson@axis.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit dd38743b4cc2f86be250eaf156cf113ba3dd531a ]
With TX VLAN offload enabled the source MAC address for frames sent using the
VLAN interface is currently set to the address of the real interface. This is
wrong since the VLAN interface may be configured with a different address.
The bug was introduced in commit 2205369a314e12fcec4781cc73ac9c08fc2b47de
("vlan: Fix header ops passthru when doing TX VLAN offload.").
This patch sets the source address before calling the create function of the
real interface.
Signed-off-by: Peter Boström <peter.bostrom@netrounds.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 2d8d40afd187bced0a3d056366fb58d66fe845e3 ]
Resizing fq hash table allocates memory while holding qdisc spinlock,
with BH disabled.
This is definitely not good, as allocation might sleep.
We can drop the lock and get it when needed, we hold RTNL so no other
changes can happen at the same time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit c88507fbad8055297c1d1e21e599f46960cbee39 ]
DST_NOCOUNT should only be used if an authorized user adds routes
locally. In case of routes which are added on behalf of router
advertisments this flag must not get used as it allows an unlimited
number of routes getting added remotely.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit d2d273ffabd315eecefce21a4391d44b6e156b73 ]
Without this fix, ipv6_exthdrs_offload_init doesn't register IPPROTO_DSTOPTS
offload, but returns 0 (as the IPPROTO_ROUTING registration actually succeeds).
This then causes the ipv6_gso_segment to drop IPv6 packets with IPPROTO_DSTOPTS
header.
The issue detected and the fix verified by running MS HCK Offload LSO test on
top of QEMU Windows guests, as this test sends IPv6 packets with
IPPROTO_DSTOPTS.
Signed-off-by: Anton Nayshtut <anton@swortex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit de1443916791d75fdd26becb116898277bb0273f ]
Some applications didn't expect recvmsg() on a non blocking socket
could return -EINTR. This possibility was added as a side effect
of commit b3ca9b02b00704 ("net: fix multithreaded signal handling in
unix recv routines").
To hit this bug, you need to be a bit unlucky, as the u->readlock
mutex is usually held for very small periods.
Fixes: b3ca9b02b00704 ("net: fix multithreaded signal handling in unix recv routines")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rainer Weikusat <rweikusat@mobileactivedefense.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit e588e2f286ed7da011ed357c24c5b9a554e26595 ]
Quoting Alexander Aring:
While fragmentation and unloading of 6lowpan module I got this kernel Oops
after few seconds:
BUG: unable to handle kernel paging request at f88bbc30
[..]
Modules linked in: ipv6 [last unloaded: 6lowpan]
Call Trace:
[<c012af4c>] ? call_timer_fn+0x54/0xb3
[<c012aef8>] ? process_timeout+0xa/0xa
[<c012b66b>] run_timer_softirq+0x140/0x15f
Problem is that incomplete frags are still around after unload; when
their frag expire timer fires, we get crash.
When a netns is removed (also done when unloading module), inet_frag
calls the evictor with 'force' argument to purge remaining frags.
The evictor loop terminates when accounted memory ('work') drops to 0
or the lru-list becomes empty. However, the mem accounting is done
via percpu counters and may not be accurate, i.e. loop may terminate
prematurely.
Alter evictor to only stop once the lru list is empty when force is
requested.
Reported-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Reported-by: Alexander Aring <alex.aring@gmail.com>
Tested-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 2892505ea170094f982516bb38105eac45f274b1 ]
Failure to schedule a TIPC tasklet with tipc_k_signal because the
tasklet handler is disabled is not an error. It means TIPC is
currently in the process of shutting down. We remove the error
logging in this case.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 1bb8dce57f4d15233688c68990852a10eb1cd79f ]
When the TIPC module is removed, the tasklet handler is disabled
before all other subsystems. This will cause lingering publications
in the name table because the node_down tasklets responsible to
clean up publications from an unreachable node will never run.
When the name table is shut down, these publications are detected
and an error message is logged:
tipc: nametbl_stop(): orphaned hash chain detected
This is actually a memory leak, introduced with commit
993b858e37b3120ee76d9957a901cca22312ffaa ("tipc: correct the order
of stopping services at rmmod")
Instead of just logging an error and leaking memory, we free
the orphaned entries during nametable shutdown.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit edcc0511b5ee7235282a688cd604e3ae7f9e1fc9 ]
When a topology server subscriber is disconnected, the associated
connection id is set to zero. A check vs zero is then done in the
subscription timeout function to see if the subscriber have been
shut down. This is unnecessary, because all subscription timers
will be cancelled when a subscriber terminates. Setting the
connection id to zero is actually harmful because id zero is the
identity of the topology server listening socket, and can cause a
race that leads to this socket being closed instead.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 4652edb70e8a7eebbe47fa931940f65522c36e8f ]
When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
connection instance, its reference count value is increased if
it's found. But subsequently if it's found that the connection is
closed, the work of sending message is not queued into its server
send workqueue, and the connection reference count is not decreased.
This will cause a reference count leak. To reproduce this problem,
an application would need to open and closes topology server
connections with high intensity.
We fix this by immediately decrementing the connection reference
count if a send fails due to the connection being closed.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 6d4ebeb4df0176b1973875840a9f7e91394c0685 ]
Currently connection shutdown callback function is called when
connection instance is released in tipc_conn_kref_release(), and
receiving packets and sending packets are running in different
threads. Even if connection is closed by the thread of receiving
packets, its shutdown callback may not be called immediately as
the connection reference count is non-zero at that moment. So,
although the connection is shut down by the thread of receiving
packets, the thread of sending packets doesn't know it. Before
its shutdown callback is invoked to tell the sending thread its
connection has been closed, the sending thread may deliver
messages by tipc_conn_sendmsg(), this is why the following error
information appears:
"Sending subscription event failed, no memory"
To eliminate it, allow connection shutdown callback function to
be called before connection id is removed in tipc_close_conn(),
which makes the sending thread know the truth in time that its
socket is closed so that it doesn't send message to it. We also
remove the "Sending XXX failed..." error reporting for topology
and config services.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 6565b9eeef194afbb3beec80d6dd2447f4091f8c ]
MLD queries are supposed to have an IPv6 link-local source address
according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch
adds a sanity check to ignore such broken MLD queries.
Without this check, such malformed MLD queries can result in a
denial of service: The queries are ignored by any MLD listener
therefore they will not respond with an MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit c485658bae87faccd7aed540fd2ca3ab37992310 ]
While working on ec0223ec48a9 ("net: sctp: fix sctp_sf_do_5_1D_ce to
verify if we/peer is AUTH capable"), we noticed that there's a skb
memory leakage in the error path.
Running the same reproducer as in ec0223ec48a9 and by unconditionally
jumping to the error label (to simulate an error condition) in
sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about
the unfreed chunk->auth_chunk skb clone:
Unreferenced object 0xffff8800b8f3a000 (size 256):
comm "softirq", pid 0, jiffies 4294769856 (age 110.757s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00 ..u^..X.........
backtrace:
[<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0
[<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210
[<ffffffff81566929>] skb_clone+0x49/0xb0
[<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp]
[<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp]
[<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp]
[<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210
[<ffffffff815a64af>] nf_reinject+0xbf/0x180
[<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue]
[<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink]
[<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0
[<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink]
[<ffffffff815a2bd8>] netlink_unicast+0x168/0x250
[<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0
[<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0
[<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380
What happens is that commit bbd0d59809f9 clones the skb containing
the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case
that an endpoint requires COOKIE-ECHO chunks to be authenticated:
---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
<------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
------------------ AUTH; COOKIE-ECHO ---------------->
<-------------------- COOKIE-ACK ---------------------
When we enter sctp_sf_do_5_1D_ce() and before we actually get to
the point where we process (and subsequently free) a non-NULL
chunk->auth_chunk, we could hit the "goto nomem_init" path from
an error condition and thus leave the cloned skb around w/o
freeing it.
The fix is to centrally free such clones in sctp_chunk_destroy()
handler that is invoked from sctp_chunk_free() after all refs have
dropped; and also move both kfree_skb(chunk->auth_chunk) there,
so that chunk->auth_chunk is either NULL (since sctp_chunkify()
allocs new chunks through kmem_cache_zalloc()) or non-NULL with
a valid skb pointer. chunk->skb and chunk->auth_chunk are the
only skbs in the sctp_chunk structure that need to be handeled.
While at it, we should use consume_skb() for both. It is the same
as dev_kfree_skb() but more appropriately named as we are not
a device but a protocol. Also, this effectively replaces the
kfree_skb() from both invocations into consume_skb(). Functions
are the same only that kfree_skb() assumes that the frame was
being dropped after a failure (e.g. for tools like drop monitor),
usage of consume_skb() seems more appropriate in function
sctp_chunk_destroy() though.
Fixes: bbd0d59809f9 ("[SCTP]: Implement the receive and verification of AUTH chunk")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Vlad Yasevich <yasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
[ Upstream commit 24b9bf43e93e0edd89072da51cf1fab95fc69dec ]
I stumbled upon this very serious bug while hunting for another one,
it's a very subtle race condition between inet_frag_evictor,
inet_frag_intern and the IPv4/6 frag_queue and expire functions
(basically the users of inet_frag_kill/inet_frag_put).
What happens is that after a fragment has been added to the hash chain
but before it's been added to the lru_list (inet_frag_lru_add) in
inet_frag_intern, it may get deleted (either by an expired timer if
the system load is high or the timer sufficiently low, or by the
fraq_queue function for different reasons) before it's added to the
lru_list, then after it gets added it's a matter of time for the
evictor to get to a piece of memory which has been freed leading to a
number of different bugs depending on what's left there.
I've been able to trigger this on both IPv4 and IPv6 (which is normal
as the frag code is the same), but it's been much more difficult to
trigger on IPv4 due to the protocol differences about how fragments
are treated.
The setup I used to reproduce this is: 2 machines with 4 x 10G bonded
in a RR bond, so the same flow can be seen on multiple cards at the
same time. Then I used multiple instances of ping/ping6 to generate
fragmented packets and flood the machines with them while running
other processes to load the attacked machine.
*It is very important to have the _same flow_ coming in on multiple CPUs
concurrently. Usually the attacked machine would die in less than 30
minutes, if configured properly to have many evictor calls and timeouts
it could happen in 10 minutes or so.
An important point to make is that any caller (frag_queue or timer) of
inet_frag_kill will remove both the timer refcount and the
original/guarding refcount thus removing everything that's keeping the
frag from being freed at the next inet_frag_put. All of this could
happen before the frag was ever added to the LRU list, then it gets
added and the evictor uses a freed fragment.
An example for IPv6 would be if a fragment is being added and is at
the stage of being inserted in the hash after the hash lock is
released, but before inet_frag_lru_add executes (or is able to obtain
the lru lock) another overlapping fragment for the same flow arrives
at a different CPU which finds it in the hash, but since it's
overlapping it drops it invoking inet_frag_kill and thus removing all
guarding refcounts, and afterwards freeing it by invoking
inet_frag_put which removes the last refcount added previously by
inet_frag_find, then inet_frag_lru_add gets executed by
inet_frag_intern and we have a freed fragment in the lru_list.
The fix is simple, just move the lru_add under the hash chain locked
region so when a removing function is called it'll have to wait for
the fragment to be added to the lru_list, and then it'll remove it (it
works because the hash chain removal is done before the lru_list one
and there's no window between the two list adds when the frag can get
dropped). With this fix applied I couldn't kill the same machine in 24
hours with the same setup.
Fixes: 3ef0eb0db4bf ("net: frag, move LRU list maintenance outside of
rwlock")
CC: Florian Westphal <fw@strlen.de>
CC: Jesper Dangaard Brouer <brouer@redhat.com>
CC: David S. Miller <davem@davemloft.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
commit 628356791b04ea988fee070f66a748a823d001bb upstream.
The call to xprt_free_allocation() will call list_del() on
req->rq_bc_pa_list, which is not attached to a list.
This patch moves the list_del() out of xprt_free_allocation()
and into those callers that need it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
|
|
This merges 3.12.15-rt25.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Conflicts:
drivers/misc/Makefile
drivers/net/ethernet/freescale/gianfar.c
drivers/net/ethernet/freescale/gianfar_ethtool.c
drivers/net/ethernet/freescale/gianfar_sysfs.c
|
|
raise_softirq_irqoff() disables interrupts and wakes the softirq
daemon, but after reenabling interrupts there is no preemption check,
so the execution of the softirq thread might be delayed arbitrarily.
In principle we could add that check to local_irq_enable/restore, but
that's overkill as the rasie_softirq_irqoff() sections are the only
ones which show this behaviour.
Reported-by: Carsten Emde <cbe@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
On RT write_seqcount_begin() disables preemption and device_rename()
allocates memory with GFP_KERNEL and grabs later the sysfs_mutex
mutex. Serialize with a mutex and add use the non preemption disabling
__write_seqcount_begin().
To avoid writer starvation, let the reader grab the mutex and release
it when it detects a writer in progress. This keeps the normal case
(no reader on the fly) fast.
[ tglx: Instead of replacing the seqcount by a mutex, add the mutex ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
This code triggers the new WARN in __raise_softirq_irqsoff() though it
actually looks at the softirq pending bit and calls into the softirq
code, but that fits not well with the context related softirq model of
RT. It's correct on mainline though, but going through
local_bh_disable/enable here is not going to hurt badly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The netfilter code relies only on the implicit semantics of
local_bh_disable() for serializing wt_write_recseq sections. RT breaks
that and needs explicit serialization here.
Reported-by: Peter LaDow <petela@gocougs.wsu.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
in response to the oops in ip_output.c:ip_send_unicast_reply under high
network load with CONFIG_PREEMPT_RT_FULL=y, reported by Sami Pietikainen
<Sami.Pietikainen@wapice.com>, this patch adds local serialization in
ip_send_unicast_reply.
from ip_output.c:
/*
* Generic function to send a packet as reply to another packet.
* Used to send some TCP resets/acks so far.
*
* Use a fake percpu inet socket to avoid false sharing and contention.
*/
static DEFINE_PER_CPU(struct inet_sock, unicast_sock) = {
...
which was added in commit be9f4a44 in linux-stable. The git log, wich
introduced the PER_CPU unicast_sock, states:
<snip>
commit be9f4a44e7d41cee50ddb5f038fc2391cbbb4046
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Jul 19 07:34:03 2012 +0000
ipv4: tcp: remove per net tcp_sock
tcp_v4_send_reset() and tcp_v4_send_ack() use a single socket
per network namespace.
This leads to bad behavior on multiqueue NICS, because many cpus
contend for the socket lock and once socket lock is acquired, extra
false sharing on various socket fields slow down the operations.
To better resist to attacks, we use a percpu socket. Each cpu can
run without contention, using appropriate memory (local node)
<snip>
The per-cpu here thus is assuming exclusivity serializing per cpu - so
the use of get_cpu_ligh introduced in
net-use-cpu-light-in-ip-send-unicast-reply.patch, which droped the
preempt_disable in favor of a migrate_disable is probably wrong as this
only handles the referencial consistency but not the serialization. To
evade a preempt_disable here a local lock would be needed.
Therapie:
* add local lock:
* and re-introduce local serialization:
Tested on x86 with high network load using the testcase from Sami Pietikainen
while : ; do wget -O - ftp://LOCAL_SERVER/empty_file > /dev/null 2>&1; done
Link: http://www.spinics.net/lists/linux-rt-users/msg11007.html
Cc: stable-rt@vger.kernel.org
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Replace it by a local lock. Though that's pretty inefficient :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
1)enqueue_to_backlog() (called from netif_rx) should be
bind to a particluar CPU. This can be achieved by
disabling migration. No need to disable preemption
2)Fixes crash "BUG: scheduling while atomic: ksoftirqd"
in case of RT.
If preemption is disabled, enqueue_to_backog() is called
in atomic context. And if backlog exceeds its count,
kfree_skb() is called. But in RT, kfree_skb() might
gets scheduled out, so it expects non atomic context.
3)When CONFIG_PREEMPT_RT_FULL is not defined,
migrate_enable(), migrate_disable() maps to
preempt_enable() and preempt_disable(), so no
change in functionality in case of non-RT.
-Replace preempt_enable(), preempt_disable() with
migrate_enable(), migrate_disable() respectively
-Replace get_cpu(), put_cpu() with get_cpu_light(),
put_cpu_light() respectively
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Acked-by: Rajan Srivastava <Rajan.Srivastava@freescale.com>
Cc: <rostedt@goodmis.orgn>
Link: http://lkml.kernel.org/r/1337227511-2271-1-git-send-email-Priyanka.Jain@freescale.com
Cc: stable-rt@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
There are (probably rare) situations when a system crashed and the system
console becomes unresponsive but the network icmp layer still is alive.
Wouldn't it be wonderful, if we then could submit a sysreq command via ping?
This patch provides this facility. Please consult the updated documentation
Documentation/sysrq.txt for details.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
|
|
qdisc_lock is taken w/o disabling interrupts or bottom halfs. So code
holding a qdisc_lock() can be interrupted and softirqs can run on the
return of interrupt in !RT.
The spin_trylock() in net_tx_action() makes sure, that the softirq
does not deadlock. When the lock can't be acquired q is requeued and
the NET_TX softirq is raised. That causes the softirq to run over and
over.
That works in mainline as do_softirq() has a retry loop limit and
leaves the softirq processing in the interrupt return path and
schedules ksoftirqd. The task which holds qdisc_lock cannot be
preempted, so the lock is released and either ksoftirqd or the next
softirq in the return from interrupt path can proceed. Though it's a
bit strange to actually run MAX_SOFTIRQ_RESTART (10) loops before it
decides to bail out even if it's clear in the first iteration :)
On RT all softirq processing is done in a FIFO thread and we don't
have a loop limit, so ksoftirqd preempts the lock holder forever and
unqueues and requeues until the reset button is hit.
Due to the forced threading of ksoftirqd on RT we actually cannot
deadlock on qdisc_lock because it's a "sleeping lock". So it's safe to
replace the spin_trylock() with a spin_lock(). When contended,
ksoftirqd is scheduled out and the lock holder can proceed.
[ tglx: Massaged changelog and code comments ]
Solved-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Carsten Emde <cbe@osadl.org>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Claudio R. Goncalves <lclaudio@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Retry loops on RT might loop forever when the modifying side was
preempted. Use cpu_chill() instead of cpu_relax() to let the system
make progress.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable-rt@vger.kernel.org
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|