summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2007-10-09SUNRPC: Fix bytes-per-op accounting for RPC over UDPChuck Lever
NFS performance metrics reported zero bytes sent per op when mounting with UDP. The UDP socket transport wasn't properly counting the number of bytes sent. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09RPCRDMA: rpc rdma verbs interface implementation\"Talpey, Thomas\
This implements the interface from rpcrdma to the RDMA verbs interface supported by Infniband and iWARP. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: James Lentini <jlentini@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09RPCRDMA: rpc rdma protocol implementation\"Talpey, Thomas\
This implements the marshaling and unmarshaling of the rpcrdma transport headers. Connection management is also addressed. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09RPCRDMA: rpc rdma transport switch\"Talpey, Thomas\
This implements the configuration and building of the core transport switch implementation of the rpcrdma transport. Stubs are provided for the rpcrdma protocol handling, and the infiniband/iwarp verbs interface. These are provided in following patches. Signed-off-by: Tom Talpey <talpey@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS/SUNRPC: use transport protocol naming\"Talpey, Thomas\
Instead of an { address family, raw IP protocol number }-tuple, use the newly-defined RPC identifier when creating clients in the upper layers. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09NFS/SUNRPC: support transport protocol naming\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, select RPC transports by an identifier (to be used in following patches). Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: rearrange RPC sockets definitions\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, move the sockets-dependent definitions into their own file. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: rename the rpc_xprtsock_create structure\"Talpey, Thomas\
To prepare for including non-sockets-based RPC transports, change the overly suggestive name of the transport creation arguments struct. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Finish API to load RPC transport implementations dynamically\"Talpey, Thomas\
Allow RPC client transport implementations to be loaded as needed, or as they become available from distributors or third-party vendors. Note that we leave the IP sockets implementation in sunrpc.o permanently, as IP functionality is always available in any kernel that runs NFS. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Provide a new API for registering transport implementations\"Talpey, Thomas\
To allow transport capabilities to be loaded dynamically, provide an API for registering and unregistering the transports with the RPC client. Eventually xprt_create_transport() will be changed to search the list of registered transports when initializing a fresh transport. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions\"Talpey, Thomas\
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions As a preface to allowing arbitrary transport modules to be loaded dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions that a transport implementation might want to use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: mark bulk read/write data in xdrbuf\"Talpey, Thomas\
Adds a flag word to the xdrbuf struct which indicates any bulk disposition of the data. This enables RPC transport providers to marshal it efficiently/appropriately, and may enable other optimizations. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: export per-transport rpcbind netid's\"Talpey, Thomas\
The rpcbind (v3+) netid is provided by each RPC client transport. This fixes an omission in IPv6 rpcbind client support, and enables future extension. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: move per-transport rpcbind netid's\"Talpey, Thomas\
Move the TCP/UDP rpcbind netid's from the rpcbind client to a global header. Signed-off-by: Tom Talpey <tmt@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: RPC bind failures should be permanent for NULL requestsChuck Lever
The purpose of an RPC ping (a NULL request) is to determine whether the remote end is operating and supports the RPC program and version of the request. If we do an RPC bind and the remote's rpcbind service says "this program or service isn't supported" then we have our answer already, and we should give up immediately. This is good for the kernel mount client, as it will cause the request to fail, and then allow an immediate retry with different options. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Split another new rpcbind retry error code from EACCESChuck Lever
Add more new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns EACCES) Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT) This change allows more specific error processing for each of these two cases. We now fail case 2 instead of retrying... it's a server configuration error not to support even rpcbind version 2. And don't expose this new error code to user land -- convert it to EIO before failing the RPC. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add a new error code for retry waiting for another binderChuck Lever
Add new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns -EACCES) Case 2: another process is already in the middle of binding on this transport (now returns -EAGAIN) This change allows more specific retry processing for each of these two cases. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Retry bad rpcbind repliesChuck Lever
When a server returns a bad rpcbind reply, make rpcbind client recovery logic retry with an older protocol version. Older versions are more likely to work correctly. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Make rpcb_decode_getaddr more picky about universal addressesChuck Lever
Add better sanity checking of server replies to the GETVERSADDR reply decoder. Change the error return code: EIO is what other XDR decoding routines return if there is a failure while decoding. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Clean up in rpc_show_tasksChuck Lever
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’: /home/cel/linux/net/sunrpc/clnt.c:1538: warning: signed and unsigned type in conditional expression This points out another case where a conditional expression returns a signed value in one arm and an unsigned value in the other. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Make sure server name is reasonable before trying to print itChuck Lever
Check the length of the passed-in server name before trying to print it in the log. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Use correct argument type in memcpy()Chuck Lever
Noticed by Tom Talpey <tmt@netapp.com>: OBTW, there's a nit on that memcpy, too. The r_addr is an array, so memcpy(&map->r_addr is passing the address of the array as a char **. It's the same as map->r_addr, but technically the wrong type. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: fix a signed v. unsigned comparison nit in rpc_bind_new_programChuck Lever
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’: /home/cel/linux/net/sunrpc/clnt.c:445: warning: comparison between signed and unsigned RPC version numbers are u32, not int. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Only one dprintk is needed during client creationChuck Lever
Remove one of two identical dprintk's that occur when an RPC client is created. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix generation of universal addresses forChuck Lever
Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind client: 1. The r_addr argument must be a full universal address, not just an IP address, and 2. The universal address in r_addr is the address of the remote rpcbind server, not the RPC service being requested This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater. In addition, if the rpcbind client is unable to start the rpcbind request, make sure not to leak the xprt. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2007-10-09SUNRPC: Add support for formatted universal addressesChuck Lever
"Universal addresses" are a string representation of an IP address and port. They are described fully in RFC 3530, section 2.2. Add support for generating them in the RPC client's socket transport module. Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2007-10-09SUNRPC: Split xs_reclassify_socket into an IPv4 and IPv6 versionChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add a helper for extracting the address using the correct typeChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add IPv6 address support to net/sunrpc/xprtsock.cChuck Lever
Finalize support for setting up RPC client transports to remote RPC services addressed via IPv6. Based on work done by Gilles Quillard at Bull Open Source. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create connect workers for IPv6Chuck Lever
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename IPv4 connect workersChuck Lever
Prepare for introduction of IPv6 versions of same. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Refactor a part of socket connect logic into a helper functionChuck Lever
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: create an IPv6-savvy mechanism for binding to a reserved portChuck Lever
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_bind() to prepare for IPv6-specific bind methodChuck Lever
Prepare for introduction of IPv6-specific socket bind function. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Introduce support for setting the port number in IPv6 addressesChuck Lever
We could clone xs_set_port, but this is easier overall. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add support for IPv6 to the kernel's rpcbind clientChuck Lever
Prepare for adding IPv6 support to the RPC client by adding IPv6 capabilities to rpcbind. Note that this is support on the query side only; registering IPv6 addresses with the local portmapper will come later. Note we have to take care not to fall back to using version 2 of the rpcbind protocol if we're dealing with IPv6 address. Version 2 doesn't support IPv6 at all. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: add a function to format IPv6 addressesChuck Lever
Clone xs_format_ipv4_peer_addresses into an IPv6 version. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Rename xs_format_peer_addressesChuck Lever
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it to xs_format_ipv4_peer_addresses. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Add hex-formatted address support to rpc_peeraddr2str()Chuck Lever
Add support for the NFS client's need to export volume information with IP addresses formatted in hex instead of decimal. This isn't used yet, but subsequent patches (not in this series) will change the NFS client to use this functionality. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Free address buffers in a loopChuck Lever
Use more generic logic to free buffers holding formatted addresses. This makes it less likely a bug will be introduced when adding additional buffer types in xs_format_peer_address(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Use standard macros for printing IP addressesChuck Lever
include/linux/kernel.h gives us some nice macros for formatting IP addresses. Use them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix a signed v. unsigned comparison in net/sunrpc/xprtsock.cChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Fix a signed v. unsigned comparison in rpcbind's XDR routinesChuck Lever
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-09SUNRPC: Convert rpc_pipefs to use the generic filesystem notification hooksTrond Myklebust
This will allow rpc.gssd to use inotify instead of dnotify in order to locate new rpc upcall pipes. This also requires the exporting of __audit_inode_child(), which is used by fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-10-08[IPv6]: Fix ICMPv6 redirect handling with target multicast addressBrian Haley
When the ICMPv6 Target address is multicast, Linux processes the redirect instead of dropping it. The problem is in this code in ndisc_redirect_rcv(): if (ipv6_addr_equal(dest, target)) { on_link = 1; } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) { ND_PRINTK2(KERN_WARNING "ICMPv6 Redirect: target address is not link-local.\n"); return; } This second check will succeed if the Target address is, for example, FF02::1 because it has link-local scope. Instead, it should be checking if it's a unicast link-local address, as stated in RFC 2461/4861 Section 8.1: - The ICMP Target Address is either a link-local address (when redirected to a router) or the same as the ICMP Destination Address (when redirected to the on-link destination). I know this doesn't explicitly say unicast link-local address, but it's implied. This bug is preventing Linux kernels from achieving IPv6 Logo Phase II certification because of a recent error that was found in the TAHI test suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the multicast address in the Destination field instead of Target field, so we were passing the test. This won't be the case anymore. The patch below fixes this problem, and also fixes ndisc_send_redirect() to not send an invalid redirect with a multicast address in the Target field. I re-ran the TAHI Neighbor Discovery section to make sure Linux passes all 245 tests now. Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08[PKT_SCHED] cls_u32: error code isn't been propogated properlyStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08[ROSE]: Fix rose.ko oops on unloadAlexey Dobriyan
Commit a3d384029aa304f8f3f5355d35f0ae274454f7cd aka "[AX.25]: Fix unchecked rose_add_loopback_neigh uses" transformed rose_loopback_neigh var into statically allocated one. However, on unload it will be kfree's which can't work. Steps to reproduce: modprobe rose rmmod rose BUG: unable to handle kernel NULL pointer dereference at virtual address 00000008 printing eip: c014c664 *pde = 00000000 Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC Modules linked in: rose ax25 fan ufs loop usbhid rtc snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd thermal usbcore button processor evdev sr_mod cdrom CPU: 0 EIP: 0060:[<c014c664>] Not tainted VLI EFLAGS: 00210086 (2.6.23-rc9 #3) EIP is at kfree+0x48/0xa1 eax: 00000556 ebx: c1734aa0 ecx: f6a5e000 edx: f7082000 esi: 00000000 edi: f9a55d20 ebp: 00200287 esp: f6a5ef28 ds: 007b es: 007b fs: 0000 gs: 0033 ss: 0068 Process rmmod (pid: 1823, ti=f6a5e000 task=f7082000 task.ti=f6a5e000) Stack: f9a55d20 f9a5200c 00000000 00000000 00000000 f6a5e000 f9a5200c f9a55a00 00000000 bf818cf0 f9a51f3f f9a55a00 00000000 c0132c60 65736f72 00000000 f69f9630 f69f9528 c014244a f6a4e900 00200246 f7082000 c01025e6 00000000 Call Trace: [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a5200c>] rose_rt_free+0x1d/0x49 [rose] [<f9a51f3f>] rose_exit+0x4c/0xd5 [rose] [<c0132c60>] sys_delete_module+0x15e/0x186 [<c014244a>] remove_vma+0x40/0x45 [<c01025e6>] sysenter_past_esp+0x8f/0x99 [<c012bacf>] trace_hardirqs_on+0x118/0x13b [<c01025b6>] sysenter_past_esp+0x5f/0x99 ======================= Code: 05 03 1d 80 db 5b c0 8b 03 25 00 40 02 00 3d 00 40 02 00 75 03 8b 5b 0c 8b 73 10 8b 44 24 18 89 44 24 04 9c 5d fa e8 77 df fd ff <8b> 56 08 89 f8 e8 84 f4 fd ff e8 bd 32 06 00 3b 5c 86 60 75 0f EIP: [<c014c664>] kfree+0x48/0xa1 SS:ESP 0068:f6a5ef28 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-08[TCP]: Fix fastpath_cnt_hint when GSO skb is partially ACKedIlpo Järvinen
When only GSO skb was partially ACKed, no hints are reset, therefore fastpath_cnt_hint must be tweaked too or else it can corrupt fackets_out. The corruption to occur, one must have non-trivial ACK/SACK sequence, so this bug is not very often that harmful. There's a fackets_out state reset in TCP because fackets_out is known to be inaccurate and that fixes the issue eventually anyway. In case there was also at least one skb that got fully ACKed, the fastpath_skb_hint is set to NULL which causes a recount for fastpath_cnt_hint (the old value won't be accessed anymore), thus it can safely be decremented without additional checking. Reported by Cedric Le Goater <clg@fr.ibm.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03Merge branch 'fixes-jgarzik' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-10-02[PATCH] softmac: Fix compiler-warningRichard Knutsson
CC net/ieee80211/softmac/ieee80211softmac_wx.o /home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c: In function ‘ieee80211softmac_wx_set_essid’: /home/kernel/src/net/ieee80211/softmac/ieee80211softmac_wx.c:117: warning: label ‘out’ defined but not used due to commit: efe870f9f4ad74410a18ecbf0d9ba7c14b50a0fb. Removing the label. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-07-18 00:45:31 (GMT)