summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2009-07-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-31xfrm: select sane defaults for xfrm[4|6] gc_threshNeil Horman
Choose saner defaults for xfrm[4|6] gc_thresh values on init Currently, the xfrm[4|6] code has hard-coded initial gc_thresh values (set to 1024). Given that the ipv4 and ipv6 routing caches are sized dynamically at boot time, the static selections can be non-sensical. This patch dynamically selects an appropriate gc threshold based on the corresponding main routing table size, using the assumption that we should in the worst case be able to handle as many connections as the routing table can. For ipv4, the maximum route cache size is 16 * the number of hash buckets in the route cache. Given that xfrm4 starts garbage collection at the gc_thresh and prevents new allocations at 2 * gc_thresh, we set gc_thresh to half the maximum route cache size. For ipv6, its a bit trickier. there is no maximum route cache size, but the ipv6 dst_ops gc_thresh is statically set to 1024. It seems sane to select a simmilar gc_thresh for the xfrm6 code that is half the number of hash buckets in the v6 route cache times 16 (like the v4 code does). Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30IPVS: use pr_fmtHannes Eder
While being at it cleanup whitespace. Signed-off-by: Hannes Eder <heder@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30ipv4: ARP neigh procfs buffer overflowroel kluin
If arp_format_neigh_entry() can be called with n->dev->addr_len == 0, then a write to hbuffer[-1] occurs. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30vlan: allow creating vlan when real device is not upStephen Hemminger
There is no reason for the arbitrary restriction that device must be up to create a vlan. This patch was added to Vyatta kernel to resolve startup ordering issues where vlan's are created but real device was disabled. Note: the vlan already correctly inherits the operstate from real device; so if vlan is created and real device is marked down, the vlan is marked down. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30net/netlabel: Add kmalloc NULL testsJulia Lawall
The test on map4 should be a test on map6. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-29mac80211: fix suspendJohannes Berg
Jan reported that his b43-based laptop hangs during suspend. The problem turned out to be mac80211 asking the driver to stop the hardware before removing interfaces, and interface removal caused b43 to touch the hardware (while down, which causes the hang). This patch fixes mac80211 to do reorder these operations to have them in the correct order -- first remove interfaces and then stop the hardware. Some more code is necessary to be able to do so in a race-free manner, in particular it is necessary to not process frames received during quiescing. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13337. Reported-by: Jan Scholz <scholz@fias.uni-frankfurt.de> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27mac80211: do not queue work after suspend in the dynamic ps timerLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-27xfrm: export xfrm garbage collector thresholds via sysctlNeil Horman
Export garbage collector thresholds for xfrm[4|6]_dst_ops Had a problem reported to me recently in which a high volume of ipsec connections on a system began reporting ENOBUFS for new connections eventually. It seemed that after about 2000 connections we started being unable to create more. A quick look revealed that the xfrm code used a dst_ops structure that limited the gc_thresh value to 1024, and always dropped route cache entries after 2x the gc_thresh. It seems the most direct solution is to export the gc_thresh values in the xfrm[4|6] dst_ops as sysctls, like the main routing table does, so that higher volumes of connections can be supported. This patch has been tested and allows the reporter to increase their ipsec connection volume successfully. Reported-by: Joe Nall <joe@nall.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> ipv4/xfrm4_policy.c | 18 ++++++++++++++++++ ipv6/xfrm6_policy.c | 18 ++++++++++++++++++ 2 files changed, 36 insertions(+) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27net: ethtool_op_get_rx_csum() should be public and exportedEric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27net/netlabel: Correct redundant testJulia Lawall
entry was tested for NULL near the beginning of the function, followed by a return, and there is no intervening modification of its value. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( *x == NULL | *x != NULL ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27Merge branch 'for-linus' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
2009-07-27net: irda: init spinlock after memcpyDeepak Saxena
irttp_dup() copies a tsap_cb struct, but does not initialize the spinlock in the new structure, which confuses lockdep. Signed-off-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27phonet: phonet_device_get() fixEric Dumazet
net/phonet/pn_dev.c: In function `phonet_device_get': net/phonet/pn_dev.c:99: warning: 'dev' might be used uninitialized in this function Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27ethtool: device independent rx_csum and get_flags routinesSridhar Samudrala
This helps avoid error messages with ethtool -k on devices that don't provide device specific routines. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> ------------------------------------------------------------------ Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27net/bridge: use kobject_put to release kobject in br_add_if error pathXiaotian Feng
kobject_init_and_add will alloc memory for kobj->name, so in br_add_if error path, simply use kobject_del will not free memory for kobj->name. Fix by using kobject_put instead, kobject_put will internally calls kobject_del and frees memory for kobj->name. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-27NET: ROSE: Don't use static buffer.Ralf Baechle
The use of a static buffer in rose2asc() to return its result is not threadproof and can result in corruption if multiple threads are trying to use one of the procfs files based on rose2asc(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-26phonet: Fix build.David S. Miller
As reported by Oliver Hartkopp: net/phonet/pn_dev.c: In function ‘phonet_init_net’: net/phonet/pn_dev.c:221: error: implicit declaration of function ‘proc_net_fops_create’ net/phonet/pn_dev.c: In function ‘phonet_exit_net’: net/phonet/pn_dev.c:242: error: implicit declaration of function ‘proc_net_remove’ Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-24mac80211: Fix regression in mesh forwarding path.Javier Cardona
The removal of the master netdev broke the mesh forwarding path. This patch fixes it by using the new internal 'pending' queue. As a result of this change, mesh forwarding no longer does the inefficient 802.11 -> 802.3 -> 802.11 conversion that was done before. [Changes since v1] Suggested by Johannes: - Select queue before adding to mpath queue - ieee80211_add_pending_skb -> ieee80211_add_pending_skbs - Remove unnecessary header wme.h Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: fix ieee80211_xmit call contextJohannes Berg
ieee80211_xmit() cannot be called with tasklets enabled because it is normally called from within a tasklet. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24net: remove unused skb->do_not_encryptJohannes Berg
mac80211 required this due to the master netdev, but now it can put all information into skb->cb and this can go. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: remove master netdevJohannes Berg
With the internal 'pending' queue system in place, we can simply put packets there instead of pushing them off to the master dev, getting rid of the master interface completely. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24net: export __dev_addr_sync/__dev_addr_unsyncJohannes Berg
For mac80211, with the master netdev removal, we need to be able to sync a multicast address list onto another list that is not tracked within a netdev, so we need access to the functions doing that. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: avoid setting default_key if add_key failsZhu Yi
In cfg80211_upload_connect_keys(), we call add_key, set_default_key and set_default_mgmt_key (if applicable) one by one. If one of these operations fails, we should stop calling the following functions. Because if the key is not added successfully, we should not set it as default key anyway. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix typo of IWEVASSOCRESPIEZhu Yi
It should be IWEVASSOCREQIE instead. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: set_default_key only for WEPZhu Yi
We invoke the cfg80211 set_default_key callback only for WEP key configuring. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: fix spare warnings in driver-trace.hChristian Lamparter
This patch fixes the following errors: driver-trace.h:148:1: error: cannot size expression driver-trace.h:148:1: error: cannot size expression [...] driver-trace.h:222:1: error: cannot size expression driver-trace.h:71:1: error: incompatible types for operation (<) driver-trace.h:71:1: left side has type void *<noident> driver-trace.h:71:1: right side has type int driver-trace.h:99:1: error: incompatible types for operation (<) driver-trace.h:99:1: left side has type void *<noident> driver-trace.h:99:1: right side has type int driver-trace.h:148:1: error: incompatible types for operation (<) driver-trace.h:148:1: left side has type void *<noident> driver-trace.h:148:1: right side has type int driver-trace.h:222:1: error: cannot size expression driver-trace.h:248:1: error: incompatible types for operation (<) driver-trace.h:248:1: left side has type void *<noident> driver-trace.h:248:1: right side has type int driver-trace.h:446:1: error: incompatible types for operation (<) driver-trace.h:446:1: left side has type void *<noident> driver-trace.h:446:1: right side has type int Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: do not monitor the connection while scanningChristian Lamparter
mac80211 constantly monitors the connection to the associated AP in order to check if it is out of reach/dead. This is absolutely fine most of the time. Except when there is a scheduled scan for the whole neighborhood. After all this path could trigger while scanning on different channel. Or even worse: this AP probing triggers a WARN_ON in rate_lowest_index when the scan code did a band transition! ( http://www.kerneloops.org/raw.php?rawid=449304 ) Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: don't optimise wext calls too muchJohannes Berg
In the wext code I tried to not reconnect all the time when the user wasn't really sure what they were doing, like setting the BSSID back to the same value it was. However, this optimisation should only be done while associated so that setting the BSSID back to the same value that it was actually triggers a new association if not currently associated. To achieve, that, put the relevant code into the !IDLE case instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Kalle Valo <kalle.valo@iki.fi> Tested-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: remove WARN_ON in __cfg80211_sme_scan_doneZhu Yi
cfg80211_sme_scan_done() can be called (by fullmac cards) with wdev->conn == NULL when CFG80211_SME_CONNECTING. We quit silently instead of WARN_ON in this case. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: treat ieee80211_regdom hints as user hintsLuis R. Rodriguez
We were treating ieee80211_regdom module parameter hints as core hints, this means we were not letting the user help compliance further when using the module parameter. It also meant that users with a device with a custom regulatory domain set (wiphy->custom_regulatory) using this module parameter were being stuck to the original default core static regualtory domain. We fix this by using the static cfg80211_regdomain alpha2 as the core hint and treating the module parameter separately. All iwlwifi and ath5k/ath9k/ar9170 devices which world roam set the wiphy->custom_regulatory. This change allows users using this module parameter to have it trated as a a proper user hint and not have it ignored. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: add helper for management / no-ack frame rate decisionLuis R. Rodriguez
All current rate control algorithms agree to send management and no-ack frames at the lowest rate. They also agree to do this when sta and the private rate control data is NULL. We add a hlper to mac80211 for this and simplify the rate control algorithm code. Developers wishing to make enhancements to rate control algorithms are for broadcast/multicast can opt to not use this in their gate_rate() mac80211 callback. Cc: Zhu Yi <yi.zhu@intel.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Cc: ipw3945-devel@lists.sourceforge.net Cc: Gabor Juhos <juhosg@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: make minstrel/pid RC use ieee80211_is_data(fc)Luis R. Rodriguez
Cc: Felix Fietkau <nbd@openwrt.org> Cc: Derek Smithies <derek@indranet.co.nz> Cc: Chittajit Mitra <Chittajit.Mitra@Atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: drop frames for sta with no valid rateLuis R. Rodriguez
When we're associated we should be able to send data to target sta. If we cannot we may be trying to use the incorrect band to talk to the sta. Lets catch any such cases, warn, and drop the frames to not invalidate assumptions being made on rate control algorithms when they have a valid sta to communicate with. Any such cases should be handled and fixed. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix unregistrationJohannes Berg
The work that we cancel there requires the cfg80211_mutex, so we can't cancel it under the mutex, which is fine, we can just move it to after the locked section. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: cancel the connection monitor timers/workJohannes Berg
In "mac80211: monitor the connection" I forgot to add code to cancel the new timers & work when the interface is brought down, which isn't a problem if you just bring it down, but _is_ a problem when you destroy the interface. Correct this lapse. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix disabling WPA via wext (SIOCSIWAUTH)Gábor Stefanik
cfg80211_set_wpa_version completely missed the use case when disabling WPA, considering IW_AUTH_WPA_VERSION_DISABLED an invalid argument. This caused weird error messages in wpa_supplicant. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix more bugs in mlme handlingJohannes Berg
The "what-was-I-thinking-if-anything" patch. Clearly, if cfg80211_send_disassoc() does wdev_lock() and then calls __cfg80211_send_disassoc(), the latter shouldn't lock again. And the sme_state test is ... no further comments. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24nl80211: report BSS statusJohannes Berg
When connected to a BSS, or joined to an IBSS, we'll want to know in userspace without using wireless extensions, so report the BSS status in the BSS list. Userspace can query the BSS list, display all the information and retrieve the station information as well. For example (from hwsim): $ iw dev wlan1 scan dump BSS 02:00:00:00:00:00 (on wlan1) -- associated freq: 2462 beacon interval: 100 capability: ESS ShortSlotTime (0x0401) signal: -50.00 dBm SSID: j Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 DS Paramater set: channel 11 ERP: <no flags> Extended supported rates: 24.0 36.0 48.0 54.0 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix wext setting SSIDJohannes Berg
Pavel reported that you can't set the SSID from "foo" to "bar". I tried reproducing, but used different values, with different lengths, and thus never saw the obvious problem. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: don't look at wdev->ssid for giwessidJohannes Berg
This variable is only used internally, _while_ connected. If we use it, the sequence # iwconfig wlan1 essid foo <connects> # iwconfig wlan1 essid "" <disconnects> # iwconfig will still display "foo" as the SSID afterwards, which is obviously quite bogus. Fix this by only displaying the wext SSID, if present. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix wext statsJohannes Berg
Instead of using the wext BSSID which may be NULL if you haven't explicitly set one, we should instead use the current_bss pointer -- if that's NULL we aren't connected anyway. Fixes missing signal quality output reported to me internally at Intel. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: mesh: fix two small problemsJohannes Berg
1) there's a spin_lock() that needs to be spin_lock_bh() 2) action frames of size 24 might cause an out-of-bounds memory access (for the 25th byte only, so no big deal) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix a locking bugJohannes Berg
The cfg80211_sme_disassoc() function is already holding a lock here that cfg80211_mlme_deauth() would take, so it needs to use __cfg80211_mlme_deauth() instead. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: monitor the connectionJohannes Berg
With the recent MLME rework I accidentally removed the connection monitoring code. In order to add it back, this patch will add new code to monitor both for beacon loss and for the connection actually working, with possibly separate triggers. When no unicast frames have been received from the AP for (currently) two seconds, we will send the AP a probe request. Also, when we don't see beacons from the AP for two seconds, we do the same (but those times need not be the same due to the way the code is now written). Additionally, clean up the parameters to the ieee80211_set_disassoc() function that I need here, those are all useless except sdata. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24mac80211: fix multi-use timerJohannes Berg
We have, sometimes, multiple things that want to run but don't have their own timer. Introduce a new function to mac80211's mlme run_again() that makes sure that the timer will run again at the _first_ needed time, use that function and also properly reprogram the timer once it fired. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: fix NULL dereference in IBSS SIOCGIWAPZhu Yi
This patch avoids memcpy from wdev->wext.ibss.bssid if it is NULL. This could happen if we SIOCGIWAP before SIOCSIWAP. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24cfg80211: rework key operationJohannes Berg
This reworks the key operation in cfg80211, and now only allows, from userspace, configuring keys (via nl80211) after the connection has been established (in managed mode), the IBSS been joined (in IBSS mode), at any time (in AP[_VLAN] modes) or never for all the other modes. In order to do shared key authentication correctly, it is now possible to give a WEP key to the AUTH command. To configure static WEP keys, these are given to the CONNECT or IBSS_JOIN command directly, for a userspace SME it is assumed it will configure it properly after the connection has been established. Since mac80211 used to check the default key in IBSS mode to see whether or not the network is protected, it needs an update in that area, as well as an update to make use of the WEP key passed to auth() for shared key authentication. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-24nl80211: introduce new key attributesJohannes Berg
We will soon want to nest key attributes into some new attribute for configuring static WEP keys at connect() and ibss_join() time, so we need nested attributes for that. However, key attributes right now are 'global'. This patch thus introduces new nested attributes for the key settings and functions for parsing them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-07-11 00:28:02 (GMT)