summaryrefslogtreecommitdiff
path: root/scripts/genksyms/genksyms.c
AgeCommit message (Collapse)Author
2009-09-23Documentation/: fix warnings from -Wmissing-prototypes in HOSTCFLAGSLadinu Chandrasinghe
Fix up -Wmissing-prototypes in compileable userspace code, mainly under Documentation/. Signed-off-by: Ladinu Chandrasinghe <ladinu.pub@gmail.com> Signed-off-by: Trevor Keith <tsrk@tsrk.net> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14Revert "kbuild: strip generated symbols from *.ko"Sam Ravnborg
This reverts commit ad7a953c522ceb496611d127e51e278bfe0ff483. And commit: ("allow stripping of generated symbols under CONFIG_KALLSYMS_ALL") 9bb482476c6c9d1ae033306440c51ceac93ea80c These stripping patches has caused a set of issues: 1) People have reported compatibility issues with binutils due to lack of support for `--strip-unneeded-symbols' with objcopy 2.15.92.0.2 Reported by: Wenji 2) ccache and distcc no longer works as expeced Reported by: Ted, Roland, + others 3) The installed modules increased a lot in size Reported by: Ted, Davej + others Reported-by: Wenji Huang <wenji.huang@oracle.com> Reported-by: "Theodore Ts'o" <tytso@mit.edu> Reported-by: Dave Jones <davej@redhat.com> Reported-by: Roland McGrath <roland@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-19kbuild: strip generated symbols from *.koJan Beulich
This patch changes the way __crc_ symbols are being resolved from using ld to do so to using the assembler, thus allowing these symbols to be marked local (the linker creates then as global ones) and hence allow stripping (for modules) or ignoring (for vmlinux) them. While at this, also strip other generated symbols during module installation. One potentially debatable point is the handling of the flags passeed to gcc when translating the intermediate assembly file into an object: passing $(c_flags) unchanged doesn't work as gcc passes --gdwarf2 to gas whenever is sees any -g* option, even for -g0, and despite the fact that the compiler would have already produced all necessary debug info in the C->assembly translation phase. I took the approach of just filtering out all -g* options, but an alternative to such negative filtering might be to have a positive filter which might, in the ideal case allow just all the -Wa,* options to pass through. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03genksyms: allow to ignore symbol checksum changesAndreas Gruenbacher
This adds an "override" keyword for use in *.symvers / *.symref files. When a symbol is overridden, the symbol's old definition will be used for computing checksums instead of the new one, preserving the previous checksum. (Genksyms will still warn about the change.) This is meant to allow distributions to hide minor actual as well as fake ABI changes. (For example, when extra type information becomes available because additional headers are included, this may change checksums even though none of the types used have actully changed.) This approach also allows to get rid of "#ifdef __GENKSYMS__" hacks in the code, which are currently used in some vendor kernels to work around checksum changes. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03genksyms: track symbol checksum changesAndreas Gruenbacher
Sometimes it is preferable to avoid changes of exported symbol checksums (to avoid breaking externally provided modules). When a checksum change occurs, it can be hard to figure out what caused this change: underlying types may have changed, or additional type information may simply have become available at the point where a symbol is exported. Add a new --reference option to genksyms which allows it to report why checksums change, based on the type information dumps it creates with the --dump-types flag. Genksyms will read in such a dump from a previous run, and report which symbols have changed (and why). The behavior can be controlled for an entire build as follows: If KBUILD_SYMTYPES is set, genksyms uses --dump-types to produce *.symtypes dump files. If any *.symref files exist, those will be used as the reference to check against. If KBUILD_PRESERVE is set, checksum changes will fail the build. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-31kbuild: genksyms: Include extern information in dumpsAndreas Gruenbacher
The extern flag currently is not included in type dump files (genksyms --dump-types). Include that flag there for completeness. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-07-24remove the v850 portAdrian Bunk
Trying to compile the v850 port brings many compile errors, one of them exists since at least kernel 2.6.19. There also seems to be noone willing to bring this port back into a usable state. This patch therefore removes the v850 port. If anyone ever decides to revive the v850 port the code will still be available from older kernels, and it wouldn't be impossible for the port to reenter the kernel if it would become actively maintained again. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-28kbuild: fixup genksyms usage/getoptMike Frysinger
The usage does not mention the "-a,--arch" or "-T,--dump-types" options, so add them. The calls to getopt() seem to mention options that no longer exist (some "k" and "p" thingy) but omits the "h" option which means using '-h' actually triggers the error code path, so update those as well. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-07blackfin architectureBryan Wu
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-06-24kbuild: support for %.symtypes filesAndreas Gruenbacher
Here is a patch that adds a new -T option to genksyms for generating dumps of the type definition that makes up the symbol version hashes. This allows to trace modversion changes back to what caused them. The dump format is the name of the type defined, followed by its definition (which is almost C): s#list_head struct list_head { s#list_head * next , * prev ; } The s#, u#, e#, and t# prefixes stand for struct, union, enum, and typedef. The exported symbols do not define types, and thus do not have an x# prefix: nfs4_acl_get_whotype int nfs4_acl_get_whotype ( char * , t#u32 ) The symbol type defintion of a single file can be generated with: make fs/jbd/journal.symtypes If KBUILD_SYMTYPES is defined, all the *.symtypes of all object files that export symbols are generated. The single *.symtypes files can be combined into a single file after a kernel build with a script like the following: for f in $(find -name '*.symtypes' | sort); do f=${f#./} echo "/* ${f%.symtypes}.o */" cat $f echo done \ | sed -e '\:UNKNOWN:d' \ -e 's:[,;] }:}:g' \ -e 's:\([[({]\) :\1:g' \ -e 's: \([])},;]\):\1:g' \ -e 's: $::' \ $f \ | awk ' /^.#/ { if (defined[$1] == $0) { print $1 next } defined[$1] = $0 } { print } ' When the kernel ABI changes, diffing individual *.symtype files, or the combined files, against each other will show which symbol changes caused the ABI changes. This can save a tremendous amount of time. Dump the types that make up modversions Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-12kbuild: clean-up genksymsSam Ravnborg
o remove all inlines o declare everything static which is only used by genksyms.c o delete unused functions o delete unused variables o delete unused stuff in genksyms.h o properly ident genksyms.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-12kbuild: Lindent genksyms.cSam Ravnborg
No fix-ups applied yet. Just the raw Lindent output. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-12kbuild: fix genksyms build errorSam Ravnborg
genksyms needs to know when a symbol must have a "_" prefex as is true for a few architectures. Pass $(ARCH) as commandline argument and hardcode what architectures that needs this info. Previous attemt to take it from elfconfig.h was br0ken since elfconfig.h is a generated file. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08kbuild: Fix bug in crc symbol generating of kernel and modulesLuke Yang
The scripts/genksyms/genksyms.c uses hardcoded "__crc_" prefix for crc symbols in kernel and modules. The prefix should be replaced by "MODULE_SYMBOL_PREFIX##__crc_" otherwise there will be warnings when MODULE_SYMBOL_PREFIX is not NULL. I am sorry my last patch for this issue is actually wrong. I revert it in this patch. Signed-off-by: Luke Yang <luke.adi@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!