| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig fix from Michal Marek:
"This is a fix for a regression caused by my previous pull request.
A sed command in scripts/config that used colons as separator was
accidentally changed to use slashes, which fails when you use slashes
in a value. Changing it back to colons is of course not a proper fix,
but at least it will be broken in the same way it had been for four
years. A proper fix is pending"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/config: fix variable substitution command
|
|
Commit 229455bc02b87f7128f190c4491b4ceffff38648 accidentally changed the
separator between sed `s' command and its parameters from ':' to '/'.
Revert this change.
Reported-and-tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Pull MIPS updates from Ralf Baechle:
"This has been sitting in -next for a while with no objections and all
MIPS defconfigs except one are building fine; that one platform got
broken by another patch in your tree and I'm going to submit a patch
separately.
- a handful of fixes that didn't make 3.11
- a few bits of Octeon 3 support with more to come for a later
release
- platform enhancements for Octeon, ath79, Lantiq, Netlogic and
Ralink SOCs
- a GPIO driver for the Octeon
- some dusting off of the DECstation code
- the usual dose of cleanups"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (65 commits)
MIPS: DMA: Fix BUG due to smp_processor_id() in preemptible code
MIPS: kexec: Fix random crashes while loading crashkernel
MIPS: kdump: Skip walking indirection page for crashkernels
MIPS: DECstation HRT calibration bug fixes
MIPS: Export copy_from_user_page() (needed by lustre)
MIPS: Add driver for the built-in PCI controller of the RT3883 SoC
MIPS: DMA: For BMIPS5000 cores flush region just like non-coherent R10000
MIPS: ralink: Add support for reset-controller API
MIPS: ralink: mt7620: Add cpu-feature-override header
MIPS: ralink: mt7620: Add spi clock definition
MIPS: ralink: mt7620: Add wdt clock definition
MIPS: ralink: mt7620: Improve clock frequency detection
MIPS: ralink: mt7620: This SoC has EHCI and OHCI hosts
MIPS: ralink: mt7620: Add verbose ram info
MIPS: ralink: Probe clocksources from OF
MIPS: ralink: Add support for systick timer found on newer ralink SoC
MIPS: ralink: Add support for periodic timer irq
MIPS: Netlogic: Built-in DTB for XLP2xx SoC boards
MIPS: Netlogic: Add support for USB on XLP2xx
MIPS: Netlogic: XLP2xx update for I2C controller
...
|
|
As discussed recently on the arm [1] and lm-sensors [2] lists, it is
possible to use section markers on variables in a way which gcc doesn't
understand (or at least not the way the developer intended):
static struct __initdata samsung_pll_clock exynos4_plls[nr_plls] = {
does NOT put exynos4_plls in the .initdata section. The __initdata marker
can be virtually anywhere on the line, EXCEPT right after "struct". The
preferred location is before the "=" sign if there is one, or before the
trailing ";" otherwise.
[1] http://permalink.gmane.org/gmane.linux.ports.arm.kernel/258149
[2] http://lists.lm-sensors.org/pipermail/lm-sensors/2013-August/039836.html
So, update checkpatch to find these misuses and report an error when it's
immediately after struct or union, and a warning when it's otherwise not
immediately before the ; or =.
A similar patch was suggested by Andi Kleen
https://lkml.org/lkml/2013/8/5/648
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A previous patch ("checkpatch: add --types option to report only
specific message types") uses a perl syntax introduced in perl version
5.14.
Use the backward compatible perl syntax instead.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are some cases where checkpatch can take a long time to complete.
Reduce the likelihood of this long run-time by adding a new test for lines
with and without comments and eliminating checks on lines with only
comments.
This reduces the number of "ctx_statement_block" calls, and also the
number of tests of $stat, which is now undefined for these blank lines.
One test in particular, the "check for switch/default statements without a
break", could take an extremely long time to parse as it tries to skip
interleaving comments within the ctx_statement_block/$stat and that could
be done multiple times unnecessarily.
A small test case taken from cfg80211.h before this patch would take
1000's of seconds to run, now it's just a couple seconds.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Previous attempt at fixing SPACING errors could make a hash of several
defects.
This patch should make --fix be a lot better at correcting these defects.
Trim left and right sides of these defects appropriately instead of a
somewhat random attempt at it.
Trim left spaces from any following bit of the modified line when only a
single space is required around an operator.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Phil Carmody <phil.carmody@partner.samsung.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The tracing subsystem uses slightly odd #defines to set path/directory
locations for include files.
These #defines can cause false positives for the complex macro tests so
add exclusions for these specific #defines (TRACE_SYSTEM,
TRACE_INCLUDE_FILE, TRACE_INCLUDE_PATH).
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a --types convenience option to show only specific message types.
Combined with the --fix option, this can produce specific suggested
formatting patches to files.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
checkpatch can generate a false positive when inserting a new kernel-doc
block and function above an existing kernel-doc block.
Fix it by checking that the context line is also a newly inserted line.
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Using the extern keyword on function prototypes is superfluous visual
noise so suggest removing it.
Using extern can cause unnecessary line wrapping at 80 columns and
unnecessarily long multi-line function prototypes.
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Emit a warning when a signature is used more than once.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I got a bug report from a couple of users who said checkpatch.pl was
broken for them. It was erroring out on fairly random lines most commonly
with messages like:
Nested quantifiers in regex; marked by <--HERE in m/(\((?:[^\(\)]++ <-- HERE |(?-1))*\))/ at ./checkpatch.pl line 340.
The bug reporter was running a version of perl 5.8 which was end-of-lifed
in 2008: http://www.cpan.org/src/. Versions of perl this old are at
_best_ quite untested. At worst, they are crusty and known to be
completely broken.
If folks have a system _that_ old, then we should have mercy on them and
give them a half-decent error message rather than fail with nutty error
messages.
This patch enforces that checkpatch.pl is run with perl 5.10, which was
end-of-lifed in 2009. The new --ignore-perl-version command-line switch
will let folks override this if they want.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
$Lval is a test for complete name (ie: foo->bar.Baz[1])
If any of this is CamelCase, then the current test uses the entire $Lval.
This isn't optimal because it can emit messages with foo->bar.Baz and
bar.Baz when Baz is a variable specified in an include file.
So instead, break the $Lval into words and check each word for CamelCase
uses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Suggest a few more single-line corrections.
Remove DOS line endings
Simplify removing trailing whitespace
Remove global/static initializations to 0/NULL
Convert pr_warning to pr_warn
Add space after brace
Convert binary constants to hex
Remove whitespace after line continuation
Use inline not __inline or __inline__
Use __printf and __scanf
Use a single ; for statement terminations
Convert __FUNCTION__ to __func__
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kconfig updates from Michal Marek:
"This is the kconfig part of kbuild for v3.12-rc1:
- post-3.11 search code fixes and micro-optimizations
- CONFIG_MODULES is no longer a special case; this is needed to
eventually fix the bug that using KCONFIG_ALLCONFIG breaks
allmodconfig
- long long is used to store hex and int values
- make silentoldconfig no longer warns when a symbol changes from
tristate to bool (it's a job for make oldconfig)
- scripts/diffconfig updated to work with newer Pythons
- scripts/config does not rely on GNU sed extensions"
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: do not allow more than one symbol to have 'option modules'
kconfig: regenerate bison parser
kconfig: do not special-case 'MODULES' symbol
diffconfig: Update script to support python versions 2.5 through 3.3
diffconfig: Gracefully exit if the default config files are not present
modules: do not depend on kconfig to set 'modules' option to symbol MODULES
kconfig: silence warning when parsing auto.conf when a symbol has changed type
scripts/config: use sed's POSIX interface
kconfig: switch to "long long" for sanity
kconfig: simplify symbol-search code
kconfig: don't allocate n+1 elements in temporary array
kconfig: minor style fixes in symbol-search code
kconfig/[mn]conf: shorten title in search-box
kconfig: avoid multiple calls to strlen
Documentation/kconfig: more concise and straightforward search explanation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull misc kbuild updates from Michal Marek:
"In the kbuild misc branch, I have:
- make rpm-pkg updates, most importantly the rpm package now calls
/sbin/installkernel
- make deb-pkg: debuginfo split, correct kernel image path for
parisc, mips and powerpc and a couple more minor fixes
- New coccinelle check"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/checkkconfigsymbols.sh: replace echo -e with printf
Provide version number for Debian firmware package
coccinelle: replace 0/1 with false/true in functions returning bool
deb-pkg: add a hook argument to match debian hooks parameters
deb-pkg: fix installed image path on parisc, mips and powerpc
deb-pkg: split debug symbols in their own package
deb-pkg: use KCONFIG_CONFIG instead of .config file directly
rpm-pkg: add generation of kernel-devel
rpm-pkg: install firmware files in kernel relative directory
rpm-pkg: add %post section to create initramfs and grub hooks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild update from Michal Marek:
"Only these two commits are in the kbuild branch this time:
- Using filechk for include/config/kernel.release
- Cleanup in scripts/sortextable.c"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not overwrite include/config/kernel.release needlessly
scripts: remove unused function in sortextable.c
|
|
Pull Tile arch updates from Chris Metcalf:
"These changes bring in a bunch of new functionality that has been
maintained internally at Tilera over the last year, plus other stray
bits of work that I've taken into the tile tree from other folks.
The changes include some PCI root complex work, interrupt-driven
console support, support for performing fast-path unaligned data
fixups by kernel-based JIT code generation, CONFIG_PREEMPT support,
vDSO support for gettimeofday(), a serial driver for the tilegx
on-chip UART, KGDB support, more optimized string routines, support
for ftrace and kprobes, improved ASLR, and many bug fixes.
We also remove support for the old TILE64 chip, which is no longer
buildable"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits)
tile: refresh tile defconfig files
tile: rework <asm/cmpxchg.h>
tile PCI RC: make default consistent DMA mask 32-bit
tile: add null check for kzalloc in tile/kernel/setup.c
tile: make __write_once a synonym for __read_mostly
tile: remove support for TILE64
tile: use asm-generic/bitops/builtin-*.h
tile: eliminate no-op "noatomichash" boot argument
tile: use standard tile_bundle_bits type in traps.c
tile: simplify code referencing hypervisor API addresses
tile: change <asm/system.h> to <asm/switch_to.h> in comments
tile: mark pcibios_init() as __init
tile: check for correct compiler earlier in asm-offsets.c
tile: use standard 'generic-y' model for <asm/hw_irq.h>
tile: use asm-generic version of <asm/local64.h>
tile PCI RC: add comment about "PCI hole" problem
tile: remove DEBUG_EXTRA_FLAGS kernel config option
tile: add virt_to_kpte() API and clean up and document behavior
tile: support FRAME_POINTER
tile: support reporting Tilera hypervisor statistics
...
|
|
Previously, it was possible to have more than one symbol with the
'option modules' attached to them, although only the last one would
in fact control tristates.
Since this does not make much sense, only allow at most one symbol to
control tristates.
Note: it is still possible to have more than one symbol that control
tristates, but indirectly:
config MOD1
bool "mod1"
select MODULES
config MOD2
bool "mod2"
select MODULES
config MODULES
bool
option modules
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Regenerate bison parser after changes made in:
6902dcc: kconfig: do not special-case 'MODULES' symbol
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Currently, the 'MODULES' symbol is hard-coded to be the default symbol
that enables/disables tristates, if no other symbol was declared with
'option modules'.
While this used to be needed for the Linux kernel, we now have an
explicit 'option modules' attached to the 'MODULES' symbol (since
cset 11097a036), so we no longer need to special-case it in the
kconfig code.
Furthermore, kconfig is extensively used out of the Linux kernel, and
other projects may have another meaning for a symbol named 'MODULES'.
This patch changes the way we enable/disable tristates: if a symbol was
found with 'option modules' attached to it, then that symbol controls
enabling tristates. Otherwise, tristates are disabled, even if a symbol
named 'MODULES' exists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Minor fixes mainly, including a potential use-after-free on remove
found by CONFIG_DEBUG_KOBJECT_RELEASE which may be theoretical"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
module: Fix mod->mkobj.kobj potentially freed too early
kernel/params.c: use scnprintf() instead of sprintf()
kernel/module.c: use scnprintf() instead of sprintf()
module/lsm: Have apparmor module parameters work with no args
module: Add NOARG flag for ops with param_set_bool_enable_only() set function
module: Add flag to allow mod params to have no arguments
modules: add support for soft module dependencies
scripts/mod/modpost.c: permit '.cranges' secton for sh64 architecture.
module: fix sprintf format specifier in param_get_byte()
|
|
Support past and active versions of python while maintaining backward
compatibility. Script has been tested on python versions up to and
including 3.3.X.
Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This commit adds support for static ftrace, graph function support,
and dynamic tracer support.
Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
|
|
-e is a non-standard echo option, echo output is
implementation-dependent when it is used. Replace echo -e
with printf as suggested by POSIX echo manual.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
A lot of 64-bit systems supported by Linux/MIPS have boot firmware or
bootloaders that only understand 32-bit ELF files, and as such, the vmlinux.32
target exists to support these systems. Therefore, it'd be nice if the tar-pkg
target recognised this, and included the right version when packaging up a
binary of the kernel.
This updates buildtar to support MIPS targets. MIPS may use 'vmlinux'
or 'vmlinux.32' depending on the target system. This uses 'vmlinux.32'
in preference to 'vmlinux' where present (although I should check which
is newer), including either file as /boot/vmlinux-${version}.
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1673/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Need permit '.cranges' section for sh64 architecture, or modpost will
report warning:
LD init/built-in.o
WARNING: init/built-in.o (.cranges): unexpected non-allocatable section.
Did you forget to use "ax"/"aw" in a .S file?
Note that for example <linux/init.h> contains
section definitions for use in .S files.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
|
|
Handle gracefully the instance where config files are not present.
Compatible with python versions 2.5, 2.6 and 2.7.
The try/except is forward compatible with python version 3 once the entire script is ported.
Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:
include/config/auto.conf:3014:warning: symbol value 'm' invalid for
HOTPLUG_PCI_PCIE
Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
git checkout 1fe0135
make mrproper
make allmodconfig
make silentoldconfig
git checkout aa8032b
make allmodconfig
make silentoldconfig
Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.
The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.
Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.
Thread in:
http://marc.info/?l=linux-pci&m=137569198904000&w=2
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
Script `config' relies on extensions of `GNU sed', and is thus not
working on all Unixes:
- in-place edition of files (-i), which can be replaced with
a temporary file;
- extended-regexps (-r), which can be split into basic regexps;
- single-line calls to `a' command, while some implementations
require a leading newline before the parameter.
Rewrite calls to `sed' to comply with POSIX interface, and move them
to helper functions.
Signed-off-by: Clement Chauplannaz <chauplac@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
|
|
Instead of using "long" for kconfig "hex" and "range" values, which may
change in size depending on the host architecture, use "long long". This
will allow values greater than INT_MAX on 32-bit hosts when cross
compiling.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
|
|
scripts/package/builddeb is used to create Debian packages.
Currently the firmware package always gets the same version number
irrespective of the Kernel version.
The paths inside the firmware package depend on the Kernel
version.
With the patch supplied the Kernel version becomes part of the
Debian firmware package number.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This semantic patch replaces "return {0,1};" with "return
{false,true};" in functions returning bool.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
We now provide the installed image path to the kernel hooks.
This should allow the package to better integrate with debian hooks, and
should not be too disruptive of hooks supporting only one parameter.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
This can reduce almost 3 times the size of the linux-image package,
while keeping the debug symbols available for this particular build, in
their own package.
This mimics the way kernels are built in debian, ubuntu, or with
make-kpkg, and comes at the price of a small slowdown in the building of
packages.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Cc: Ben Hutchings <ben@decadent.org.uk>
Acked-by: maximilian attems <max@stro.at>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Signed-off-by: Anisse Astier <anisse@astier.eu>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
git://gitorious.org/linux-kconfig/linux-kconfig into kbuild/kconfig
|
|
Change the spec file to generate a kernel-devel module
allowing for compilation of external kernel modules.
This patch requires a new minimum RPM level of 4.0.3.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
Prior to this patch, firmware files were being installed
in /lib/firmware with a potential conflict with already
installed kernels.
firmware files are now installed in /lib/firmware/<release>
and packaged with the rest of the modules.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
/sbin/installkernel is used to insure grub hooks are
inserted and the initramfs is created on the
target system.
The invokation installkernel will work with any
kernel as long as:
- /sbin/installkernel exists
- the kernel and sysem map files are readable
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
|
|
There is no need for a double indirection in the temporary array that
stores the internediate search results.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
|
|
The temporary array that stores the search results is not NULL-terminated,
so there is no reason to allocate n+1 elements.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
|
|
Two minor style fixes:
- no space before/after parenthesis in function definition
- no {} for single-line if()
And one grammar fix in a comment.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
|
|
No need to repeat the 'CONFIG_' string in the title,
once is explicit enough.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
|
|
Calls to strlen are costly, so avoid calling strln as much as we can.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
|
|
Sweep of the simple cases.
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull coccinelle updates from Michal Marek:
"The misc branch is reserved for Coccinelle this time:
- 'report' is the default mode
- MAINTAINERS update for Coccinelle
- documentation udate
- use new option format for spatch(1)
- J=<n> variable to mimic make -j for coccicheck
- check for missing pci_free_consistent() calls
There are some patches for rpm-pkg and deb-pkg waiting for the
3.12-rc1 merge window"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
Coccinelle: Update information about the minimal version required
Coccinelle: Update the options used to the new option scheme
scripts: Coccinelle script for pci_free_consistent()
Coccinelle: Update the documentation
Coccinelle: Update section of MAINTAINERS
coccicheck: span checks across CPUs
scripts/coccinelle: check for field address argument to kfree
Coccinelle: Update the Coccinelle section of MAINTAINERS
Coccinelle: Make 'report' the default mode
|
