| Age | Commit message (Collapse) | Author |
|---|
|
Clean up probe routines and model detection routines so that the driver
won't call and check the PCI subsystem id at each time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
- Clean up Hungarian coding style
- Don't use static variables for I2C information; this unables to use
multiple instances. Now they are stored in struct hw20k2 fields.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix possible buffer pointer overruns. Back to zero when it's equal
or over the buffer size.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove useless variable initializations and cast at the beginning of
functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Allow 64bit DMA mask for emu20k2 chip, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Change the volume control to dB scale (as the raw data seems so).
Also added the TLV dB-scale information.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Optimize the timer update routine to look up wall clock once instead of
checking the position of each stream at each timer update.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mixer control elements are usually assigned to device 0.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
- Use static tables instead of assigining each funciton pointer
- Add __devinit* to appropriate places; pcm, mixer and timer cannot be
marked because they are kept in the function table that lives long
- Move create_alsa_devs function out of struct ct_atc to mark it
__devinit
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Set 2 to minimal periods of playback pcm setups, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
emu20k1 has a native timer interrupt based on the audio clock, which
is more accurate than the system timer (from the synchronization POV).
This patch adds the code to handle this with multiple streams.
The system timer is still used on emu20k2, and can be used also for
emu20k1 easily by changing USE_SYSTEM_TIMER to 1 in cttimer.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove unneeded substitution to 32bit int to make it really working.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The UAA-mode check in hwct20k1.c is implemented with the endian-dependent
codes. Fix to be more portable (and readable).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
emu20kx chips support 64bit address PTE. Allow the DMA bit mask to
accept 64bit address, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
Use SG-buffers instead of contiguous pages.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Remove the limitation of PAGE_SIZE to be 4k by defining the own
page size and macros for 4k. 8kb page size could be natively supported,
but it's disabled right now for simplicity.
Also, clean up using upper_32_bits() macro.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The device seems supporting only U8, S16, S24_3LE, S32. Other linear
formats result in bad outputs.
Also, added the support for 32bit float format, which wasn't listed
in the original code.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
PCM names for surround streams should be also fixed as well as the mixer
element names. Also, a bit clean up for PCM name setup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We usually pick up "Surround" mixer for the rear output, and "Side"
for the extra surround. Fix the channel mapping to follow it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The prepare callback can be called multiple times, thus it needs to
release and acquire the resource again by itself at the second or later
call.
Simply add pcm_release_resources() at the beginning of each prepare
callback in ctatc.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A space has to be put between GPL and v2.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Replace a spinlock with a mutex protecting the vm block list at
mmap / munmap calls, which caused Oops like below:
BUG: sleeping function called from invalid context at mm/slub.c:1599
in_atomic(): 0, irqs_disabled(): 1, pid: 32065, name: xine
Pid: 32065, comm: xine Tainted: P 2.6.29.4-75.fc10.x86_64 #1
Call Trace:
[<ffffffff81040685>] __might_sleep+0x105/0x10a
[<ffffffff810c9fae>] kmem_cache_alloc+0x32/0xe2
[<ffffffffa08e3110>] ct_vm_map+0xfa/0x19e [snd_ctxfi]
[<ffffffffa08e1a07>] ct_map_audio_buffer+0x4c/0x76 [snd_ctxfi]
[<ffffffffa08e2aa5>] atc_pcm_playback_prepare+0x1d7/0x2a8 [snd_ctxfi]
[<ffffffff8105ef3f>] ? up_read+0x9/0xb
[<ffffffff81186b61>] ? __up_read+0x7c/0x87
[<ffffffffa08e36a6>] ct_pcm_playback_prepare+0x39/0x60 [snd_ctxfi]
[<ffffffffa0886bcb>] snd_pcm_do_prepare+0x16/0x28 [snd_pcm]
[<ffffffffa08867c7>] snd_pcm_action_single+0x2d/0x5b [snd_pcm]
[<ffffffffa08881f3>] snd_pcm_action_nonatomic+0x52/0x6a [snd_pcm]
[<ffffffffa088a723>] snd_pcm_common_ioctl1+0x404/0xc79 [snd_pcm]
[<ffffffff810c52c8>] ? alloc_pages_current+0xb9/0xc2
[<ffffffff810c9402>] ? new_slab+0x1a5/0x1cb
[<ffffffff810ab9ea>] ? vma_prio_tree_insert+0x23/0xc1
[<ffffffffa088b411>] snd_pcm_playback_ioctl1+0x213/0x230 [snd_pcm]
[<ffffffff810b6c20>] ? mmap_region+0x397/0x4c9
[<ffffffffa088bd9b>] snd_pcm_playback_ioctl+0x2e/0x36 [snd_pcm]
[<ffffffff810ddc64>] vfs_ioctl+0x2a/0x78
[<ffffffff810de130>] do_vfs_ioctl+0x462/0x4a2
[<ffffffff81029cef>] ? default_spin_lock_flags+0x9/0xe
[<ffffffff81374647>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[<ffffffff810de1c5>] sys_ioctl+0x55/0x77
[<ffffffff8101133a>] system_call_fastpath+0x16/0x1b
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added missing module_param*() and MODULE_PARM*().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Added ctxfi: prefix to each debug print.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Use struct pci subsystem_device and revision fields instead of
unneeded calls of pci_read_config_*().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The Sound Blaster X-Fi driver supports Creative solutions based on
20K1 and 20K2 chipsets.
Supported hardware :
Creative Sound Blaster X-Fi Titanium Fatal1ty® Champion Series
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional Series
Creative Sound Blaster X-Fi Titanium Professional Audio
Creative Sound Blaster X-Fi Titanium
Creative Sound Blaster X-Fi Elite Pro
Creative Sound Blaster X-Fi Platinum
Creative Sound Blaster X-Fi Fatal1ty
Creative Sound Blaster X-Fi XtremeGamer
Creative Sound Blaster X-Fi XtremeMusic
Current release features:
* ALSA PCM Playback
* ALSA Record
* ALSA Mixer
Note:
* External I/O modules detection not included.
Signed-off-by: Wai Yew CHAY <wychay@ctl.creative.com>
Singed-off-by: Ryan RICHARDS <ryan_richards@creativelabs.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
