summaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2012-10-06ALSA: hda - make a generic unsol event handlerDavid Henningsson
Moving towards less duplication of code between codecs - this patch takes some of the common code of unsol event handling and makes it generic. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-22Merge tag 'asoc-3.7' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v3.7 Lots and lots of driver specific cleanups and enhancements but the only substantial framework feature this time round is the compressed API binding: - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for CODEC drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010.
2012-09-22ALSA: hda - add PCI identifier for Intel 5 Series/3400Pierre-Louis Bossart
Tested with LPIB delay without any issues. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-22ALSA: hda - use LPIB for delay estimationPierre-Louis Bossart
DMA Position in Buffer (DPIB) should be used for ring buffer management, while LPIB register provides information on the number of samples transfered on the link. The difference between the two pieces of information corresponds to hardware/DMA buffering. This patch reports this difference in runtime->delay, and removes the use of the COMBO mode on recent Intel hardware. Credits to Takashi Iwai for an initial patch. [rebased to for-next branch and replaced snd_printk() with snd_printdd() by tiwai] Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-22ALSA: hda - force use of SSYNC bitsPierre-Louis Bossart
SSYNC bits are typically used to start multiple streams synchronously. It makes sense to use them for a single stream for a more predictable startup sequence. The transfers only start once the DMA and FIFOs are ready. This results in a better correlation between timestamps and number of samples played. Credits to Kar Leong Wang for suggesting this improvement. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-22ALSA: hda/via - don't report presence on HPs with no presence supportHerton Ronaldo Krzesinski
If headphone jack can't detect plug presence, and we have the jack in the jack table, snd_hda_jack_detect will return the plug as always present (as it'll be considered as a phantom jack). The problem is that when this happens, line out pins will always be disabled, resulting in no sound if there are no headphones connected. This was reported as a no sound problem after suspend on http://bugs.launchpad.net/bugs/1052499, since the bug doesn't manifests on first initialization before the phantom jack is added, but on resume we reexecute the initialization code, and via_hp_automute starts reporting HP always present with the jack now on the table. BugLink: https://bugs.launchpad.net/bugs/1052499 Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: <stable@vger.kernel.org> [v3.6+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-21ALSA: hda - Add external mic quirk for Asus Zenbook UX31AOleksij Rempel
Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-20ALSA: hda - use both input paths on Conexant auto parserDavid Henningsson
On the Thinkpad W520 - and probably several other machines with Conexant 506x chips - the Dock Mic and Mic are connected to the same two selector nodes. This patch will make Dock Mic take one selector node and Mic take the other, when possible. Without the patch, both paths would take the first selector, leading to the normal Mic's volume being controlled by "Dock Mic Boost". (On other machines, this could instead fixup similar problems between Mic and Line In, for example.) BugLink: https://bugs.launchpad.net/bugs/1037642 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-19ALSA: hda - avoid non-standard "Docking" name in mixersDavid Henningsson
The standard name (and what PulseAudio picks up) is "Dock Mic", not "Docking Mic" or "Docking-Station". Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-18ALSA: hda - limit internal mic boost for Asus X202EDavid Henningsson
When the input gain for the internal mic is set to its maximum level, the background noise becomes so high - and any relevant signal clipped - that the setting becomes unusable. It is better to limit the amplification. BugLink: https://bugs.launchpad.net/bugs/1052460 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> [v3.5+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-17ALSA: hda - Add another pci id for Haswell boardWang Xingchao
A new PCI id 0x0d0c for Haswell HDA Controller. [root@SKBM04SDP ~]# lspci |grep Audio 00:03.0 Audio device: Intel Corporation Device 0d0c (rev 02) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-15Merge branch 'topic/tlv-chmap' into for-nextTakashi Iwai
This is a merge of a topic branch containing the support for the new channel map API using control elements.
2012-09-14ALSA: hda - Add mic-mute LED control for HP laptopTakashi Iwai
Some of new HP laptops have a LED for microphone (or recording) mute, and it's controlled by GPIO pin 3. Bind this with the capture switch to turn it on/off properly by the mixer change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: hda - Yet another position_fix quirk for ASUS machinesTakashi Iwai
ASUS X53S also suffers from the same issue as in commit c302d6133. Use POS_FIX_POSBUF for this hardware, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47461 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: hda - Allow to pass position_fix=0 explicitlyTakashi Iwai
Set the default value of position_fix -1, and allow user passing position_fix=0 explicitly to set the "auto" position-fix mode. Otherwise the auto mode may be switched to others like COMBO of VIACOMBO when the controller prefers it, thus user can't set the auto mode any longer. Also updated the documentation appropriately, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: Fix leftover chmap UNKNOWN -> MONO conversionsTakashi Iwai
A few files have been slipped from the previous commit to add MONO channel type. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-13ALSA: hda - Fix disordered enum definitions in patch_cirrus.cTakashi Iwai
Due to the definitions of CS420X_IMAC27_122 and CS420X_APPLE as aliases, the rest enums are set to duplicated values unexpectedly. Move the alias definitions at the end so that the enum values are defined in the proper order. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: Define more channel map positionsTakashi Iwai
For following the standard, define more channel map positions and shuffle the items a bit: - As both PulseAudio and gstreamer define MONO channel position explicitly, we should follow that, too. The mono streams point to this channel position unless they are explicitly assigned to certain channel positions. - Top-front-* and Top-rear-* positions are added, carried from PulseAudio's definitions. - Move NA and MONO definitions at the top of table right after UNKNOWN, since these are more abstract in comparison with other practical positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ice1724: Use linear scale for AK4396 volume control.Matteo Frigo
The AK4396 DAC has a linear-scale attentuator, but sound/pci/ice1712/prodigy_hifi.c used a log scale instead, which is not quite right. This patch restores the correct scale, borrowing from the ak4396 code in sound/pci/oxygen/oxygen.c. Signed-off-by: Matteo Frigo <athena@fftw.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ymfpci: Define channel mapsTakashi Iwai
Provide channel maps for individual stereo streams of YMFPCI. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ens1370: Define channel mapsTakashi Iwai
Provide channel maps for individual stereo streams of ENS1370 and ENS1371. Note that the configuration of ENS1370 uses the secondary PCM as the front unlike ENS1371. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: emu10k1x: Define channel mapsTakashi Iwai
Provide channel maps for individual stereo streams of emu10k1x. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ca0106: Define channel mapsTakashi Iwai
Provide channel maps for individual stereo streams of CA0106. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ens1370: Reduce ifdefsTakashi Iwai
... just by defining CHIP_NAME and string concats. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: ctxfi: Fix mono channel map to UNKNOWNTakashi Iwai
To follow the previous commit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Add support for MacBook Pro 10,1Takashi Iwai
MacBook Pro 10,1 needs a few adjustments to make it working: - more COEF verbs - some pin config overrides to disable the unused pin (0x0d, 0x12), and fix the internal mic (0x0e) In addition, it uses GPIO 1 and 3 like other MacBooks. The internal digital mic on the machine is still problematic: it seems that only the right channel is used and the left is always static. This looks like a hardware design, so we need to cope in the software side somehow... The primary information and test were brought from Daniel J Blueman. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11Merge branch 'for-linus' into for-nextTakashi Iwai
To merge HD-audio fixes back to 3.7 development line
2012-09-11ALSA: hda - Replace with the generic fixup codes in patch_cirrus.cTakashi Iwai
... to make easier to integrate into the common generic parser in near future. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Check bit mask for codec SSID in snd_hda_pick_fixup()Takashi Iwai
snd_hda_pick_fixup() didn't check the case where the device mask bits are set, typically used for SND_PCI_QUIRK_VENDOR() entries. Fix this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda - Avoid BDL position workaround when no_period_wakeup is setTakashi Iwai
Originally the bogus period at BDL head was introduced as a workaround for the mismatching position update at the period boundary, typically seen on dmix. However, for applications like PulseAudio that don't require period wake ups, this workaround is just superfluous. Thus better to disable it when no_period_wakeup is given in hw_params. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-11ALSA: hda_intel: add position_fix quirk for Asus K53ECatalin Iacob
Commit c20c5a841cbe47f5b7812b57bd25397497e5fbc0 changed some chipsets to default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including repeated sounds on my Asus laptop. My hardware is Cougar Point which the commit log of c20c5a841cbe47f5b7812b57bd25397497e5fbc0 mentions as tested so POS_FIX_COMBO probably works in general but apparently it doesn't on Asus K53E therefore the need for the quirk. Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Allow 3/5/7 channel map for HDMI/DPTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-10ALSA: hda - Fix Oops at codec reset/reconfigTakashi Iwai
snd_hda_codec_reset() calls restore_pincfgs() where the codec is powered up again, which eventually tries to resume and initialize via the callbacks of the codec. However, it's the place just after codec free callback, thus no codec callbacks should be called after that. On a codec like CS4206, it results in Oops due to the access in init callback. This patch fixes the issue by clearing the codec callbacks properly after freeing codec. Reported-by: Daniel J Blueman <daniel@quora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-07ALSA: hda - Remove ignore_misc_bitDavid Henningsson
The purpose of this flag is unclear. If the problem is that some machines have broken misc/NO_PRESENCE bits, they should be fixed by pin fixups. In addition, this causes jack detection functionality to be flawed on the M31EI, where there are two jacks without jack detection (which is properly marked as NO_PRESENCE), but due to ignore_misc_bit, these jacks are instead being reported as being present but always unplugged. BugLink: https://bugs.launchpad.net/bugs/939161 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ctxfi: Implement channel mapsTakashi Iwai
Assign the multi-channel map to front PCM, and other channel map to each other channel PCM. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: cmipci: Implement channel mappingTakashi Iwai
Simply enable the channel map according to the h/w capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: Implement channel maps for standard onboard AC97 driversTakashi Iwai
Just set the channel maps depending on the hardware availability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: ac97: Implement channel map workaround for ALC650Takashi Iwai
ALC650 has a channel swap option between surround and CLFE channels, so we need to tweak the channel maps dynamically depending on the register bit. Now struct snd_ac97 can contain chmap pointers for playback and capture. The driver may store these and let ac97 driver changing the channel mapping dynamically. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix channel maps for Nvidia 7x 8ch HDMI codecsTakashi Iwai
Some old Nvidia HDMI codecs with 8ch support only 2/8 or 2/6/8 channels and with the fixed CLFE-first map. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Provide the proper channel mapping for generic HDMI driverTakashi Iwai
... instead of the standard fixed channel maps. The generic HDMI is based on the audio infoframe, and its configuration can be selected via CA bits. Thus we need a translation between the CA index and the verbose channel map list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Add standard channel mapsTakashi Iwai
Although HD-audio allows pair-wise channel configurations, only the fixed channel positions are used in this version. In future, this can be changed and allow user to modify the channel positions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Move non-PCM check to per_pin in patch_hdmi.cTakashi Iwai
Recently the check for non-PCM stream state was added to the generic HDMI driver code. But this check should be done rather to each pin instead of each converter. Otherwise when a different converter is assigned at the next open, the audio infoframe can be inconsistent with the setup using the previous converter. For fixing this issue, this patch moves the state of the current non-PCM status from per_cvt to per_pin. (In addition an unused argument cvt_nid is stripped from hdmi_setup_channel_mapping()) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - fix control names for multiple speaker out on IDT/STACDavid Henningsson
For multiple speaker outs, the names were previously "Speaker,0", "Speaker,1", "Center"/"LFE", "Speaker,3". This is inconsistent, confusing, and is not picked up correctly by PulseAudio. Instead use "Front", "Surround", "Center"/"LFE", "Side" which is more standard. BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1046734 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: hda - Fix missing Master volume for STAC9200/925xTakashi Iwai
With the commit [2faa3bf: ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.c], the former Master volume control was converted to PCM. This was supposed to be covered by the vmaster control. But due to the lack of "PCM" slave definition, this didn't happen properly. The patch fixes the missing entry. Reported-by: Andrew Shadura <bugzilla@tut.by> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Setup channel mapping for non_pcm audioWang Xingchao
For HBR stream test, use straight channel mapping way. when switched back to "speaker-test -c8", even the audio infoframe is up-to-date, there should be correct channel mapping setup. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Enable HBR feature on Intel chipsWang Xingchao
HDMI channel remapping apparently effects HBR packets on Intel's chips. For compressed non-PCM audio, use "straight-through" channel mapping. For uncompressed multi-channel pcm audio, use normal channel mapping. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-06ALSA: HDMI - Fix channel_allocation array wrong orderWang Xingchao
The array channel_allocations[] is an ordered list, add function to get correct order by ca_index. Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-05ALSA: emu10k1: use list_move_tail instead of list_del/list_add_tailWei Yongjun
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: hda - Clean up redundant FG checksTakashi Iwai
Just refactoring, no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-31ALSA: hda - Yet another fix for D3 stop-clock refcountingTakashi Iwai
The call of pm_notify callback in snd_hda_codec_free() should be with the check of the current state whether pm_notify(false) is called or not, instead of codec->power_on check. For improving the code readability and fixing this inconsistency, codec->d3_stop_clk_ok is renamed to codec->pm_down_notified, and this flag is set only when runtime PM down is called. The new name reflects to a more direct purpose of the flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v0.10.2 at 2024-11-08 06:51:18 (GMT)