summaryrefslogtreecommitdiff
path: root/sound/soc/samsung
AgeCommit message (Collapse)Author
2011-08-31ASoC: Allow source specification for CODEC level sysclkMark Brown
Similarly to PLLs/FLLs some modern CODECs provide selectable system clock sources. When the clock is the clock for a DAI we do not usually need to identify which clock is being configured so can use clk_id for the source clock but with CODEC wide system clocks we will need to specify both the clock being configured and the source. Add a source argument to the CODEC driver set_sysclk() operation to reflect this. As this operation is not as widely used as the DAI set_sysclk() operation the change is not very invasive. We probably ought to go and make the same alternation for DAIs at some point. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24ASoC: SAMSUNG: Add Kconfig to support SMDK4212Sangbeom Kim
This patch adds Kconfig to support SMDK4212. SMDK4212 is based on samsung exynos4212 SoC. And WM8994 is used for audio codec. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-24Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-24ASoC: Add Springbank I/O card to Speyside KconfigJoseph Pentland
Signed-off-by: Joseph Pentland <jp@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-22Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-22ASoC: Ensure we only run Speyside WM8962 bias level callbacks onceMark Brown
We get called once per DAPM context but only need to run once. When DAPM was serialized this was a series of noops but now it can run in parallel we need to take proper care. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-16ASoC: Run Speyside WM8962 at 512fsMark Brown
Ensure we have access to all the advanced DSP functinality offered by the WM8962 by running the system clock at 512fs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-14ASoC: rx1950: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: h1940: Fix compilation error due to missing headerVasily Khoruzhick
Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-14ASoC: Remove redundant -codec from WM8750Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-12ASoC: Allow userspace control of Speyside headphone outputMark Brown
In order to facilitate the widest range of use cases (especially things like speakerphone) allow the headphone output to be enabled and disabled by the application layer. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-12Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-12ASoC: SAMSUNG: Add I2S0 internal dma driverSangbeom Kim
I2S in Exynos4 and S5PC110(S5PV210) has a internal dma. It can be used low power audio mode and 2nd channel transfer. This patch can support idma. [Reapplied after dependencies propagated through in 3.1-rc1. --broonie] Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-09Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-09ASoC: Update SMDKs for WM8580 -codec removalMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-09ASoC: Fix warning in Speyside WM8962Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-08-09ASoC: Fix binding of WM8750 on JiveMark Brown
The I2C address is misformatted and would never match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-08-08ASoC: Rename WM8915 to WM8996Mark Brown
For marketing reasons the part will be called WM8996. In order to avoid user confusion rename the driver to reflect this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-24ASoC: Revert "ASoC: SAMSUNG: Add I2S0 internal dma driver"Mark Brown
This reverts commit d7c3e9525ac8e898f1156a1f3a7c5038f6560186 as it does not currently build due to missing dependencies in the Samsung tree. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-07-20ASoC: SAMSUNG: Add I2S0 internal dma driverSangbeom Kim
I2S in Exynos4 and S5PC110(S5PV210) has a internal dma. It can be used low power audio mode and 2nd channel transfer. This patch can support idma. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-20ASoC: SAMSUNG: Modify I2S driver to support idmaSangbeom Kim
Previously, I2S driver only can support system dma. In this patch, i2s driver can support internal dma too. IDMA h/w configuration is initialized on idma.c Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Liam Girdwood <lrg@ti.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-07-13ASoC: SAMSUNG: 24-bit audio playback on Exynos4210Giridhar Maruthy
Using 256fs or 512fs will result in distortion of 24-bit audio samples. This is because the lrclk generated is not proper. Using 384 fs generates proper output. Signed-off-by: Giridhar Maruthy <giridhar.maruthy@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-30ASoC: Improve error reporting in Speyside WM8962 driverMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-26ASoC: SAMSUNG: Add idma related register definitionSangbeom Kim
This patch add idma related register definitions to support idma. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-26ASoC: SAMSUNG: Move I2S common register definitionSangbeom Kim
I2S registers can be used for control idma. Previously, register is defined in i2s.c. For sharing the registers, It is moved to i2s-regs.h Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-26ASoC: SAMSUNG: Add WM8994 PCM Machine driverSangbeom Kim
This patch add WM8994 PCM machine driver to support PCM audio on SMDKV310, SMDKC210 boards. Playback and Capture supports 8kHz sampling rates. and It is tested on SMDKV310, SMDKC210. Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-10ASoC: SMDKV310: Enable SPDIF deviceNaveen Krishna Chatradhi
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-10Merge branch 'for-3.0' into for-3.1Mark Brown
2011-06-10ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON registerSangbeom Kim
If DMA active status should be checked, I2SCON register should be referenced. In this patch, Fix the incorrect referencing of I2SCON register. Reported-by : Lakkyung Jung <lakkyung.jung@samsung.com> Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-06-08ASoC: Fix mismerge of Speyside set_bias_level_post()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-08ASoC: Support Speyside build variants with WM8962 fittedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-07ASoC: core - Optimise and refactor pcm_new() to pass only rtdLiam Girdwood
Currently pcm_new() passes in 3 arguments :- card, pcm and DAI. Refactor this to only pass in 1 argument (i.e. the rtd) since struct rtd contains card, pcm and DAI along with other members too that are useful too. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-06ASoC: Manage Speyside system clocking only in bias managementMark Brown
Now that the CODEC driver supports it defer configuration of the system clock until bias management which is a much more idiomatic place to do system power control and makes things a lot more happy when we're using both interfaces. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06ASoC: Add context parameter to card DAPM callbacksMark Brown
The card callback will get called for each DAPM context in the card so it can be useful for it to know which device is currently undergoing a transition. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-06-06Merge branch 'for-3.0' into for-3.1Mark Brown
2011-06-01ASoC: Update speyside audio driver for hardware revision 2Mark Brown
Revision 2 of the Speyside platform supplies a 32kHz clock on MCLK2 rather than MCLK1. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-25Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/Kconfig arch/arm/mach-exynos4/mach-nuri.c
2011-05-16ASoC: Remove to support sound for S5P6442Kukjin Kim
According to removing ARCH_S5P6442, we don't need to support sound for S5P6442. Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-04-28ASoC: Don't specify the DMA driver for Goni baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Don't specify the DMA driver for OpenMoko baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-04-28ASoC: Fix CODEC DAI names for GoniMark Brown
Immediately after sending the last fix I realised that the CODEC DAI names also don't correspond to the WM8994 driver. Update the DAI names to match. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-28ASoC: Fix CODEC name in GoniMark Brown
This was typoed at some point in the multi-component merge, though the driver was added along with that. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-27ASoC: Don't specify the DMA driver for Speyside baseband linkMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-18ASoC: Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
2011-04-18Merge commit 'v2.6.39-rc3' into for-2.6.39Mark Brown
2011-04-13ASoC: Mark Speyside widgets as ignoring suspendMark Brown
Allow audio paths through the Speyside system to be kept active while the system is suspended (for example, when on a voice call) by marking all the external widgets and the DAI link to the WM1250-EV1 baseband module as ignoring suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add stub baseband link on SpeysideMark Brown
Demonstrate the connection of a baseband to the system. We add a DAI for the link to the baseband. This will become visible to the application layer - audio should be started from the application layer using an application such as this: http://opensource.wolfsonmicro.com/~gg/bluetooth-pcm/bluetooth_pcm.c which starts up audio as for CPU based playback and record up to the point where data is streamed. Due to non-availability of baseband simulation hardware we reuse the configuration for the CPU link with the CODEC acting as clock master, allowing signals to be observed with a scope. A more standard system would have separate configuration for the baseband with its own ops structure and operations. Normally the baseband would be clock master as the baseband audio will be synchronised to the external telephony network. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-04-13ASoC: Add pin switches for fixed analogue inputs and outputs on SpeysideMark Brown
Pin switches enable direct control of the DAPM state from userspace, enabling simple enabling and disabling of the path. This is especially useful for outputs such as the speaker which are composed of several physical devices as it allows them to be controlled as a group. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
generated by cgit v0.10.2 at 2024-10-06 14:49:14 (GMT)