summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2015-05-19Revert "ls102xa: audio: Workaround for SAI data transfer endian issue"Alison Wang
This reverts commit <f911217e6edd> (ls102xa: audio: Workaround for SAI data transfer endian issue). The patch "ls102xa: audio: Workaround for SAI data transfer endian issue" isn't needed for LS1021A Rev2.0 silicon. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: I850e4207e7beb7eedda260df001d9189ac666f28 Reviewed-on: http://git.am.freescale.net:8181/36159 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com> Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2015-02-13Merge branch 'rtmerge'Scott Wood
Signed-off-by: Scott Wood <scottwood@freescale.com> Conflicts: arch/arm/kvm/mmu.c arch/arm/mm/proc-v7-3level.S arch/powerpc/kernel/vdso32/getcpu.S drivers/crypto/caam/error.c drivers/crypto/caam/sg_sw_sec4.h drivers/usb/host/ehci-fsl.c
2015-02-13Reset to 3.12.37Scott Wood
2014-12-11audio: sai: Add Power Management supportAlison Wang
This patch adds Power Management support for SAI. Activate regmap cache with REGCACHE_RBTREE, and use regmap cache code to save and restore registers in suspend and resume. The Transmit Control Register (TCSR) and Receive Control Register(RCSR) should be volatile registers. Signed-off-by: Alison Wang <alison.wang@freescale.com> --- This patch has been sent to upstream for review: https://patchwork.kernel.org/patch/5183621/. Change-Id: I46a53b91fa005d9833e289d06430e26569897b2d Reviewed-on: http://git.am.freescale.net:8181/22361 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Dongsheng Wang <dongsheng.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ls102xa: audio: Workaround for SAI data transfer endian issueAlison Wang
Transmit Data Register(TDR) used as the destination address of EDMA transaction is in big-endian mode. The audio data in memory and EDMA transaction are in little-endian mode. For S16_LE format data, a workaround is to swap the original 16-bit data, and then write into the higher 16 bit of TDR. Signed-off-by: Alison Wang <alison.wang@freescale.com> Change-Id: Ib15832743e9a4c69792f2dad4cb00fbbc1d2daaa Reviewed-on: http://git.am.freescale.net:8181/21063 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl: make sure the regmap-mmio is actually enabledXiubo Li
Since the Freescale SAI, ESAI and SPDIF are using the regmap-mmio, there needs a select of REGMAP_MMIO in the Kconfig to ensure that regmap-mmio is actually enabled. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream with few backport changes: commit 7d150c60f1a29c62e115e0ee2a5678400e724873 Change-Id: I61f6b089ff036b249976c1081afaa04974caca5e Reviewed-on: http://git.am.freescale.net:8181/21478 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Chao Fu <B44548@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl: Add SGTL5000 based audio machine driver.Xiubo Li
This is the SGTL5000 codec based audio driver supported with both playback and capture dai link implemention. This implementation is only compatible with device tree definition. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Alison Wang <b18965@freescale.com> --- This patch has almost been reviewed okay in the mail list. However the maintainer Mark Brown suggested to use simple-card framework instead of individual machine driver. The discussion could be found: URL: http://lkml.iu.edu//hypermail/linux/kernel/1312.2/02078.html Since from Linux Kernel V3.12 to V3.14, it changes to much for ALSA ASoC framework for supporting simple-card, and there will be about more than 100 patches to backport it, and will also be many potiential risks, so here just using individual machine driver instead of simple-card on SDK branch. Change-Id: Ia37f752f8ee6362e726c3a9c602977aa7c0991b2 Reviewed-on: http://git.am.freescale.net:8181/19755 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Jingchang Lu <jingchang.lu@freescale.com> Reviewed-by: Huan Wang <alison.wang@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: backport to 3.12Xiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Change-Id: I4e1f12afb9aefa0de69bcbab393eb8ec28f56df1 Reviewed-on: http://git.am.freescale.net:8181/19754 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.Xiubo Li
o Add SND_SOC_DAIFMT_DSP_A support. o Add SND_SOC_DAIFMT_DSP_B support. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit a3f7dcc9cc0392528bff75b17adfcd74fb8a0ecd Change-Id: I6863de1501bf897ec70f2d927046ccd3d2866010 Reviewed-on: http://git.am.freescale.net:8181/19753 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: fix Freescale SAI DAI format setting.Xiubo Li
o Fix some bugs of fsl_sai_set_dai_fmt_tr(). o Add SND_SOC_DAIFMT_LEFT_J support. o Add SND_SOC_DAIFMT_CBS_CFM support. o Add SND_SOC_DAIFMT_CBM_CFS support. o And SND_SOC_DAIFMT_RIGHT_J need to be done in the future. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 13cde090030c7d00e991c85b87c12891cc8e4df4 Change-Id: If49b36a048d2c2b3eedef732ef5bae4eed98bb4b Reviewed-on: http://git.am.freescale.net:8181/19752 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: convert to use regmap API for Freeacale SAIXiubo Li
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 78957fc349bcf29d415a649601581a993ff25e4d Change-Id: I29156c937a15a11c6b46d83fbcaab6e1afe1b767 Reviewed-on: http://git.am.freescale.net:8181/19751 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: Clean up the codeXiubo Li
Makes the code slightly shorter. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 633ff8f8a4393b4a13b94eddd2613198c32035e6 Change-Id: Ic59247589f69e0705d49fc4db9e7d269125856d8 Reviewed-on: http://git.am.freescale.net:8181/19750 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: fix the endianess for SAI fifo data.Xiubo Li
Revert the SAI's endianess for fifo data to/from DMA engine. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 72aa62bed3ea30635156fad95f123a0b665072bf Change-Id: I7c8ec99b9d8292527ba2fc47ff071146b2225fae Reviewed-on: http://git.am.freescale.net:8181/19749 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Fix one bug for hardware limitation.Xiubo Li
This is maybe one bug or a limitation of the hardware that the {T,R}CR2's Synchronous Mode bits must be set as late as possible, or the SAI device maybe hanged up, and there has not any explaination about this limitation in the SAI Data Sheet. And the {T,R}CR2's Synchronous Mode bits must be set at the same time whether for Tx or Rx stream. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 496a39d9ec238569fac6daceac8f5420c5edc2f1 Change-Id: Ib09d153b20251254277f3efacdc5d5b5d8f8425b Reviewed-on: http://git.am.freescale.net:8181/19748 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Add disable operation for the corresponding data channel.Xiubo Li
Enables/Disables the corresponding data channel for tx/rx operation. A channel must be enabled before its FIFO is accessed, and then disable it when tx/rx is stopped or idle. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit e5d0fa9c3ec59a40e0285d96b65b7f62875acd42 Change-Id: I44a321c2f74580bc6387688777434c88f027c17b Reviewed-on: http://git.am.freescale.net:8181/19747 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Move the global registers setting to _dai_probe()Xiubo Li
Because we cannot make sure which one of _dai_fmt() and _dai_sysclk() will be firstly called. So move the RCSR/TCSR and TCR1/RCR1's initialization to _dai_probe(), and this can make sure that before any of {T,R}CR{1~5} register to be set the RCSR/TCSR's RE/TE bit has been cleared for the hareware limitation. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit e6dc12d7198eddba2e3e7a13feab5c7edde7ba1d Change-Id: Ie77345f4a2d84d55443e84d1c4cb2d2a9db766d0 Reviewed-on: http://git.am.freescale.net:8181/19746 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Sort local variable in general wayNicolin Chen
Generally we would write code for local variable like: static new_func() { struct xxx *yyy; ... int ret; } But this driver only follows this pattern for some functions, not all. Thus this patch sorts the local variable in the general way. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 4e3a99f5b004b30bc604d82e5498700649148e0d Change-Id: Idcc0aea15b8b1daca140b05c5c9655cea43746b6 Reviewed-on: http://git.am.freescale.net:8181/19745 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Make dev_err information neaterNicolin Chen
Since using dev_err() there's no need to mention SAI any more, it will print the full name of the driver -- fsl_sai. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 190af12dad975f2ea7d69d1c5c9d36fec64da767 Change-Id: I2a186ded87bcafa273f99840e2eadb9e9ed63eba Reviewed-on: http://git.am.freescale.net:8181/19744 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Drop useless ret in startup()Nicolin Chen
We can save this ret to make the code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 15b29dae6604d2d2daf586429ff12f26272a868a Change-Id: Ib5d7742e67c1bf4a1e72bcf887fe8fe07250c900 Reviewed-on: http://git.am.freescale.net:8181/19743 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Drop useless channels check in hw_params()Nicolin Chen
SAi only supports two data channels on hardware level and the driver also does register the min->1 and max->2, so no need to check channels. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit d22e28cce80a93578787d273bf1fa26a2be2636b Change-Id: Ia3f1e1375c9a69d7f0259af8e801594be7b464e2 Reviewed-on: http://git.am.freescale.net:8181/19742 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Use snd_pcm_format_width()Nicolin Chen
Use common helper function snd_pcm_format_width() to make code neater. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 1d7003092771bd2feec30e2f3e5a06aa33479e08 Change-Id: I6baf4f7c72a0d9f6aa332745f9251069c9600ab4 Reviewed-on: http://git.am.freescale.net:8181/19741 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl_sai: Keep symmetry for clk_enable() and clk_disable()Nicolin Chen
There are two functions haven't clk_disable_unprepare() if having error. Thus fix them. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 1fb2d9d7465bcbb519c582fa4a3bd04ff4fce2d2 Change-Id: Ia4a2525d2e32949f2092fcd4de86d46ada27b096 Reviewed-on: http://git.am.freescale.net:8181/19740 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: fsl-sai: Remove fsl_sai_remove()Xiubo Li
There is no need of this function and makes the code slightly shorter Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit a6af47ae5399baf4f5a2426b2121c1bcb9da4019 Change-Id: I194d8ebdd181be51985a2440b7da038ba933dc5c Reviewed-on: http://git.am.freescale.net:8181/19739 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-12-11ASoC: Add SAI SoC Digital Audio Interface driver.Xiubo Li
This adds Freescale SAI ASoC Audio support. This implementation is only compatible with device tree definition. Features: o Supports playback/capture o Supports 16/20/24 bit PCM o Supports 8k - 96k sample rates o Supports master and slave mode. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> --- This patch is pulled back from upstream: commit 4355082149429d1f87b6fbfc3ebc6305a5372ce2 Change-Id: Id2c5064a47530ea7cf3e1442267efcbc8bef0f06 Reviewed-on: http://git.am.freescale.net:8181/19738 Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com> Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
2014-05-14Reset to 3.12.19Scott Wood
2014-03-31ASoC: max98090: make REVISION_ID readableStephen Warren
commit e126a646f77fdd66978785cb0a3a5e46b07aee2e upstream. The REVISION_ID register is not currently marked readable. snd_soc_read() refuses to read the register, and hence probe() fails. Fixes: d4807ad2c4c0 ("regmap: Check readable regs in _regmap_read") [exposed the bug, by checking for readability] Fixes: 685e42154dcf ("ASoC: Replace max98090 Device Driver") [left out this register from the readable list] Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: wm8958-dsp: Fix firmware block loadingLars-Peter Clausen
commit 548da08fc1e245faf9b0d7c41ecd8e07984fc332 upstream. The codec->control_data contains a pointer to the device's regmap struct. But wm8994_bulk_write() expects a pointer to the parent wm8998 device. The issue was introduced in commit d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code"). Fixes: d9a7666f ("ASoC: Remove ASoC-specific WM8994 I/O code") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: sta32x: Fix array access overflowTakashi Iwai
commit 025c3fa9256d4c54506b7a29dc3befac54f5c68d upstream. Preset EQ enum of sta32x codec driver declares too many number of items and it may lead to the access over the actual array size. Use SOC_ENUM_SINGLE_DECL() helper and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: sta32x: Fix wrong enum for limiter2 release rateTakashi Iwai
commit b3619b288b621e63f66908045f48495869a996a6 upstream. There is a typo in the Limiter2 Release Rate control, a wrong enum for Limiter1 is assigned. It must point to Limiter2. Spotted by a compile warning: In file included from sound/soc/codecs/sta32x.c:34:0: sound/soc/codecs/sta32x.c:223:29: warning: ‘sta32x_limiter2_release_rate_enum’ defined but not used [-Wunused-variable] static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ include/sound/soc.h:275:18: note: in definition of macro ‘SOC_ENUM_DOUBLE_DECL’ struct soc_enum name = SOC_ENUM_DOUBLE(xreg, xshift_l, xshift_r, \ ^ sound/soc/codecs/sta32x.c:223:8: note: in expansion of macro ‘SOC_ENUM_SINGLE_DECL’ static SOC_ENUM_SINGLE_DECL(sta32x_limiter2_release_rate_enum, ^ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: sta32x: Fix cache syncLars-Peter Clausen
commit 70ff00f82a6af0ff68f8f7b411738634ce2f20d0 upstream. codec->control_data contains a pointer to the regmap struct of the device, not to the device private data. Use snd_soc_codec_get_drvdata() instead. The issue was introduced in commit 29fdf4fbbe ("ASoC: sta32x: Convert to regmap"). Fixes: 29fdf4fbbe (ASoC: sta32x: Convert to regmap) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: da732x: Mark DC offset control registers volatileMark Brown
commit 75306820248e26d15d84acf4e297b9fb27dd3bb2 upstream. The driver reads from the DC offset control registers during callibration but since the registers are marked as volatile and there is a register cache the values will not be read from the hardware after the first reading rendering the callibration ineffective. It appears that the driver was originally written for the ASoC level register I/O code but converted to regmap prior to merge and this issue was missed during the conversion as the framework level volatile register functionality was not being used. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: wm8770: Fix wrong number of enum itemsTakashi Iwai
commit 7a6c0a58dc824523966f212c76322d47c5b0e6fe upstream. wm8770 codec driver defines ain_enum with a wrong number of items. Use SOC_ENUM_DOUBLE_DECL() macro and it's automatically fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: max98090: sync regcache on entering STANDBYDylan Reid
commit c42c8922c46d33ed769e99618bdfba06866a0c72 upstream. Sync regcache when entering STANDBY from OFF. ON isn't entered with OFF as the current state, so the registers were not being re-synced after suspend/resume. The 98088 and 98095 already call regcache_sync from STANDBY. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: txx9aclc_ac97: Fix kernel crash on probeAlexander Shiyan
commit 9febd494d15c4a351e9c9cae7184643144eea892 upstream. This patch fixes a crash caused by commit 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()). This is an attempt to assign "drvdata->base" while memory for "drvdata" is not already allocated. Fixes: 3bed3344c826 (ASoC: txx9aclc_ac97: Convert to devm_ioremap_resource()) Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-03-05ASoC: da9055: Fix device registration of PMIC and CODEC devicesAdam Thomson
commit 07b0e5b10258b48e5edfb6c8ac156f05510eb775 upstream. Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
2014-02-06ASoC: wm5110: Extend SYSCLK patch file for rev DCharles Keepax
commit 34354792432b6e0a3b156819a1a19716c50d3473 upstream. Latest evaluation of the the device has given some patch file additions for improved performance. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-06ASoC: adau1701: Fix ADAU1701_SEROCTL_WORD_LEN_16 constantLars-Peter Clausen
commit e20970ada3f699c113fe64b04492af083d11a7d8 upstream. The driver defines ADAU1701_SEROCTL_WORD_LEN_16 as 0x10 while it should be b10, so 0x2. This patch fixes it. Reported-by: Magnus Reftel <magnus.reftel@lockless.no> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09ASoC: wm5110: Correct HPOUT3 DAPM route typoCharles Keepax
commit 280484e708a3cc38fe6807718caa460e744c0b20 upstream. Reported-by: Kyung-Kwee Ryu <kyung-kwee.ryu@wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09ASoC: wm_adsp: Add small delay while polling DSP RAM startCharles Keepax
commit 939fd1e8d9deff206f12bd9d4e54aa7a4bd0ffd6 upstream. Some devices are getting very close to the limit whilst polling the RAM start, this patch adds a small delay to this loop to give a longer startup timeout. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09ASoC: wm8904: fix DSP mode B configurationBo Shen
commit f0199bc5e3a3ec13f9bc938556517ec430b36437 upstream. When wm8904 work in DSP mode B, we still need to configure it to work in DSP mode. Or else, it will work in Right Justified mode. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09ASoC: tegra: fix uninitialized variables in set_fmtStephen Warren
commit 241bf43321a10815225f477bba96a42285a2da73 upstream. In tegra*_i2s_set_fmt(), in the (fmt == SND_SOC_DAIFMT_CBM_CFM) case, "val" is never assigned to, but left uninitialized. The other case does initialized it. Fix this by initializing val at the start of the function, and only ever ORing into it. Update the handling of "mask" so it works the same way for consistency. Update tegra20_spdif.c to use the same code-style for consistency, even though it doesn't happen to suffer from the same problem at present. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org> Fixes: 0f163546a772 ("ASoC: tegra: use regmap more directly") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-12ASoC: wm8731: fix dsp mode configurationBo Shen
commit b4af6ef99a60c5b56df137d7accd81ba1ee1254e upstream. According to WM8731 "PD, Rev 4.9 October 2012" datasheet, when it works in DSP mode A, LRP = 1, while works in DSP mode B, LRP = 0. So, fix LRP for DSP mode as the datesheet specification. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-12ASoC: wm8990: Mark the register map as dirty when powering downMark Brown
commit 2ab2b74277a86afe0dd92976db695a2bb8b93366 upstream. Otherwise we'll skip sync on resume. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: wm5110: Add post SYSCLK register patch for rev D chipCharles Keepax
commit f69f86b1ba6493126a7f093a65a8952bcb183de2 upstream. Certain registers require patching after the SYSCLK has been brought up add support for this into the CODEC driver. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: arizona: Set FLL to free-run before disablingRichard Fitzgerald
commit 3e68ce1bc72e5d6615677ec5a8b0a9bcb6c7a490 upstream. The FLL must be placed into free-run mode before disabling to allow it to entirely shut down. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: fsl: imx-pcm-fiq: omit fiq counter to avoid harm in unbalanced situationsOskar Schirmer
commit fc7dc61d9a87011aaf8a6eb3144ebf9552adf5d2 upstream. Unbalanced calls to snd_imx_pcm_trigger() may result in endless FIQ activity and thus provoke eternal sound. While on the first glance, the switch statement looks pretty symmetric, the SUSPEND/RESUME pair is not: the suspend case comes along snd_pcm_suspend_all(), which for fsl/imx-pcm-fiq is called only at snd_soc_suspend(), but the resume case originates straight from the SNDRV_PCM_IOCTL_RESUME. This way userland may provoke an unbalanced resume, which might cause the fiq_enable counter to increase and never return to zero again, so eventually imx_pcm_fiq is never disabled. Simply removing the fiq_enable will solve the problem, as long as one never goes play and capture game simultaneously, but beware trying both at once, the early TRIGGER_STOP will cut off the other activity prematurely. So now playing and capturing is scrutinized separately, instead of by counting. Signed-off-by: Oskar Schirmer <oskar@scara.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: blackfin: Fix missing breakTakashi Iwai
commit afed4dbe3a043dbd833a53b6b4951e155708afd2 upstream. Fixes: 4b2ffc205cb9 ('ASoC: Blackfin I2S: add 8-bit sample support') Reported-by: David Binderman Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: wm8962: Turn on regcache_cache_only before disabling regulatorNicolin Chen
commit 50bfcf2df2fadf77e143d6099150e6fa7ef4d78c upstream. It's safer to turn on regcache_cache_only before disabling regulator since the driver will turn off the regcache_cache_only after enabling regulator. If we remain cache_only false, some command like 'amixer cset' would get failure if being run before wm8962_resume(). Signed-off-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: cs42l52: Correct MIC CTL maskBrian Austin
commit 3d800c6d75b8c92fa928a0bcaf95cd7ac5fd1ce5 upstream. The mask for CS42L52_MIC_CTL_TYPE_MASK was wrong keeping the mic config from being set correctly. Signed-off-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-04ASoC: ak4642: prevent un-necessary changes to SG_SL1Phil Edworthy
commit 7b5bfb82882b9b1c8423ce0ed6852ca3762d967a upstream. If you record the sound during playback, the playback sound becomes silent. Modify so that the codec driver does not clear SG_SL1::DACL bit which is controlled under widget Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v0.10.2 at 2024-06-03 08:12:21 (GMT)