| Age | Commit message (Collapse) | Author |
|---|
|
The fields of struct snd_seq_client_callback either aren't used or are
always set to the same value, so we can get rid of it altogether.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ALSA sequencer
None of the fields of struct snd_seq_kernel_client was actually used, so
remove them.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: YMFPCI driver
Instead of 'DS-XG', show the correct chip model (DS-1/1L/1S/1E) where possible.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: HDA Codec driver
Add the model entry (ALC880 6stack) for ASUS P5GD1-HVM.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: PCM Midlevel
Fixed wrong or supreflous snd_assert()'s.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver,HDA generic driver
- Common labels for input pins
- Fix and clean up of Realtek codec parsers
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Call platform_device_unregister() for all platform devices that we've
registered.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ALSA Core
Make the control device parent of all other ALSA devices of a card.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ENS1370/1+ driver
Move the spdif and lineio parameters around so that they are compiled
even when SUPPORT_JOYSTICK isn't set.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: HDA Codec driver
- Fix Oops with auto-probing of ALC260 with digital I/O
- Fix a typo
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
- Fix ALC882 BIOS auto-probe
- Fix ALC262 basic model
- Add assert for debugging Oops
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: EMU10K1/EMU10K2 driver
Added the chip-detail entry for SB Live 5.1 Digital OEM [SB0220, (c) 2003].
Signed-off-by: Gergely Tamas <dice@mfa.kfki.hu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: AC97 Codec,ATIIXP driver,Intel8x0 driver
This patch adds a new quirk for ac97 hardware that combines the existing
AC97_TUNE_MUTE_LED and AC97_TUNE_HP_ONLY quirks. This is needed for several
current HP laptops. Additionally, it adds the HP nx6125 to the
AC97_TUNE_MUTE_LED list.
Fixed for the latest version of ALSA by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: Documentation,PCI drivers,Digigram PCXHR driver
Add Digigram PCXHR driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: VIA82xx driver
Added dxs_support entry for ASRock mobo.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: AC97 Codec
Small fix for ALC65x codec, sync with Realtek's driver codes:
- Rename 'IEC958 Playback Route' to 'IEC958 Playback Source' so that
mixer can handle it properly
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver,HDA generic driver
This patch adds the support of ALC262,ALC883,ALC885,ALC861 to driver
More models and improvements for ALC880, ALC260 and ALC882 codecs, too.
Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ICE1724 driver
Added the basic support of M-Audio Revolution 5.1.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: EMU10K1/EMU10K2 driver
sound/pci/emu10k1/emufx.c: In function 'snd_emu10k1_efx_alloc_pm_buffer':
sound/pci/emu10k1/emufx.c:2402: error: implicit declaration of function 'vmalloc'
sound/pci/emu10k1/emufx.c:2402: warning: assignment makes pointer from integer without a cast
sound/pci/emu10k1/emufx.c: In function 'snd_emu10k1_efx_free_pm_buffer':
sound/pci/emu10k1/emufx.c:2413: error: implicit declaration of function 'vfree'
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: EMU10K1/EMU10K2 driver
Distorted sound now comes from the Audio Out socket. Still more work to do.
Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
|
|
Modules: PPC PMAC driver
The last addition of 17' powerbook support seems buggy
(it's not Toonie indeed). Removed again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: au88x0 driver
pci_dma_supported() is called right before pci_set_dma_mask() which already
calls pci_dma_supported(). The attached patch removes the unneeded call to
pci_dma_supported()
Additionally the custom VORTEX_DMA_MASK macro is replaced by DMA_32BIT_MASK
from linux/dma-mapping.h
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ALSA Core,PCM Midlevel
Make the support of old API selectable via config option.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Optimize the code when compiled without CONFIG_PROC_FS for some pci drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: SPARC DBRI driver
Don't return errors if the proc file can't be created (for the case
without CONFIG_PROC_FS).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ALSA<-OSS emulation,ALSA sequencer,ALSA<-OSS sequencer
Optimize the code when compiled without CONFIG_PROC_FS (in seq and oss
emulation parts).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HWDEP Midlevel,ALSA Core,PCM Midlevel,Timer Midlevel
Optimize the code when compiled without CONFIG_PROC_FS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: PPC PMAC driver
The audio chip in my Spring 2005 17' PowerBook was incorrectly
recognized as an AWACS chip. This adds the chip ID to the
snd_powermac driver such that it is recognized as a Toonie (I don't
know if that's correct, but it's the only one that makes it work at
all). and sorts the ID lists numerically. NOTE: This chip is only
minimally supported at this point; it has system beep support and
very low volume speaker output, and that's about it.
Signed-off-by: Kyle Moffett <mrmacman_g4@mac.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: AD1848 driver
Fix compilation without CONFIG_PM.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
- Explictly set pin control as input for all input pins
- Fix bug in 922x mixer (no mute on adc0vol)
- Remove broken ch_mode control
- Add support for jack retasking mixer controls to use rear line and
mic as surround outputs
- Add board tables to support autodetect and pin config defaults for
systems with broken bioses
- Add support for several Intel mobos
- Add support for DFI mobo with reference boards attached
(gets rid of compile time switch to use reference boards)
Signed-off-by: Matt Porter <mporter@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: Sound Core,Generic drivers
AC97 Kconfig entries broke the ALSA device drivers menu, so move them to a
location where that won't happen, enabling all device sub-menus to be
presented together.
Fixed for the latest ALSA tree by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Intel driver
The probe_mask module parameter comment notes that the intended
default is -1. Fix it to be so, otherwise all codecs are skipped
and init fails.
Signed-off-by: Matt Porter <mporter@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ENS1370/1+ driver
- spdif module option: some hardware revisions are without spdif output
- lineio module option: force shared line in / rear out jack settings
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
|
|
Modules: AC97 Codec
The following patch adds some extra IDs for the list of hardware which
should have headphone line sense enabled by default.
Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
Fixed the swapped surround/CLFE on 3stack mode of AD1988.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
Fix/enhance AD1988 support code.
- Fix for h/w bug of AD1988A rev 2
- The BIOS auto-configuration is added and used as fallback
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
Fix the channel mode helper (for put callback).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Intel driver
- Use the position buffer for obtaining the current DMA position
as default. This seems more stable than others.
- Add probe_mask module option (mainly for test boards with multiple
codecs).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver
This patch is to fix the problem of calculating the nid incorrectly
when auto-probe for ALC880. The problem to be fixed often behaves
with such words when using dmesg, 'num_steps = 0 for NID=0x8' when
auto-probe for ALC880.
The patch contains:
- alsa-kernel/pci/hda/patch_realtek.c: replace 'alc880_dac_to_idx'
with 'alc880_idx_to_dac' in function 'alc880_auto_fill_dac_nids()'
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: RawMidi Midlevel,HDA generic driver
This patch contains the following possible cleanups:
- pci/hda/hda_proc.c should #include 'hda_local.h' for including the
prototype of it's global function snd_hda_codec_proc_new()
- core/rawmidi.c: make the needlessly global and EXPORT_SYMBOL'ed
function snd_rawmidi_info() static
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ALSA Core
Fix missing include <linux/device.h>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: ICE1712 driver
Fix the inverted switch of 'Front Digital Input' of Terratec DMX 6Fire.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: USB generic driver
Somebody at Edirol fucked up and released a new revision of the UA-20
without class-specific descriptors, so now we have to hard-code the
sample format.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: HDA Codec driver
Fix AD1988 support. As default, 6stack model is used.
Still no auto-BIOS setup is implemented.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA generic driver
Allocate connection lists dynamically in generic parser.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: HDA Codec driver,HDA generic driver
- Fix connection list parsing (with ranged flag).
- Increase the max number of connections
- Introduce widget capabilities cache
- Power up/down widgets at init, suspend and resume
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Modules: RawMidi Midlevel
When the output buffer size is changed, runtime->avail must be
adjusted to the new size; otherwise, draining of a bigger buffer would
appear to fail because avail does not reach buffer_size.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ALSA Core,Memalloc module,ALSA sequencer
With dynamic minor numbers, we can increase the number of sound cards.
This requires that the sequencer client numbers of some kernel drivers
are allocated dynamically, too.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ALSA sequencer,Generic drivers
To allow increasing the maximum number of sound cards, we have to limit
the number of sequencer clients per card because client numbers are
still allocated statically.
Reducing the number of clients to four limits the number of sequencer
MIDI ports to 1024 per card.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
|
Modules: ALSA Core,ALSA Minor Numbers
Add an option to allocate device file minor numbers dynamically.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
|
