summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2013-03-21ALSA: hda - Fix DAC assignment for independent HPTakashi Iwai
The generic parser should evaluate the availability of the independent HP when specified. Otherwise a DAC without the direct connection to the corresponding pin may be assigned for the HP, but the driver doesn't check it at all. The problem was actually seen on some machines with VT1708s or equivalent codec, where DAC0 is assigned to HP although it can be connected only via aamix. This patch adds the badness evaluation for the independent HP to make it working properly. Reported-by: Lydia Wang <LydiaWang@viatech.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20ALSA: hda - Fix abuse of snd_hda_lock_devices() for DSP loaderTakashi Iwai
The current DSP loader code abuses snd_hda_lock_devices() for ensuring the DSP loader not conflicting with the other normal operations. But this trick obviously doesn't work for the PM resume since the streams are kept opened there where snd_hda_lock_devices() returns -EBUSY. That means we need another lock mechanism instead of abuse. This patch provides the new lock state to azx_dev. Theoretically it's possible that the DSP loader conflicts with the stream that has been already assigned for another PCM. If it's running, the DSP loader should simply fail. If not -- it's the case for PM resume --, we should assign this stream temporarily to the DSP loader, and take it back to the PCM after finishing DSP loading. If the PCM is operated during the DSP loading, it should get an error, too. Reported-and-tested-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20ALSA: hda - Fix typo in checking IEC958 emphasis bitTakashi Iwai
There is a typo in convert_to_spdif_status() about checking the emphasis IEC958 status bit. It should check the given value instead of the resultant value. Reported-by: Martin Weishart <martin.weishart@telosalliance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls()Daniel Mack
Creation of individual mixer controls may fail, but that shouldn't cause the entire mixer creation to fail. Even worse, if the mixer creation fails, that will error out the entire device probing. All the functions called by parse_audio_unit() should return -EINVAL if they find descriptors that are unsupported or believed to be malformed, so we can safely handle this error code as a non-fatal condition in snd_usb_mixer_controls(). That fixes a long standing bug which is commonly worked around by adding quirks which make the driver ignore entire interfaces. Some of them might now be unnecessary. Signed-off-by: Daniel Mack <zonque@gmail.com> Reported-and-tested-by: Rodolfo Thomazelli <pe.soberbo@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20ALSA: snd-usb: mixer: propagate errors up the call chainDaniel Mack
In check_input_term() and parse_audio_feature_unit(), propagate the error value that has been returned by a failing function instead of -EINVAL. That helps cleaning up the error pathes in the mixer. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-20ALSA: usb: Parse UAC2 extension unit like for UAC1Torstein Hegge
UAC2_EXTENSION_UNIT_V2 differs from UAC1_EXTENSION_UNIT, but can be handled in the same way when parsing the unit. Otherwise parse_audio_unit() fails when it sees an extension unit on a UAC2 device. UAC2_EXTENSION_UNIT_V2 is outside the range allocated by UAC1. Signed-off-by: Torstein Hegge <hegge@resisty.net> Acked-by: Daniel Mack <zonque@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18ALSA: hda - Fix yet missing GPIO/EAPD setup in cirrus driverTakashi Iwai
I forgot to update spec->gpio_data in the automute hook, so it will be overridden at the init sequence, thus the machine is still silent when no headphone jack is plugged at boot time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18ALSA: hda/cirrus - Fix the digital beep registrationTakashi Iwai
The argument passed to snd_hda_attach_beep_device() is a widget NID while spec->beep_amp holds the composed value for amp controls. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-18ALSA: hda - Fix missing beep detach in patch_conexant.cTakashi Iwai
This leaks the beep input device after module unload, which leads to Oops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55321 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecsTakashi Iwai
During the transition to the generic parser, the hook to the codec specific automute function was forgotten. This resulted in the silent output on some MacBooks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15sound: sequencer: cap array index in seq_chn_common_event()Dan Carpenter
"chn" here is a number between 0 and 255, but ->chn_info[] only has 16 elements so there is a potential write beyond the end of the array. If the seq_mode isn't SEQ_2 then we let the individual drivers (either opl3.c or midi_synth.c) handle it. Those functions all do a bounds check on "chn" so I haven't changed anything here. The opl3.c driver has up to 18 channels and not 16. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Remove extra setting of dsp_state.Dylan Reid
spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset and check it in ca0132_download_dsp(). Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check download state of DSP.Dylan Reid
Instead of using the dspload_is_loaded() function, check the dsp_state that is kept in the spec. The dspload_is_loaded() function returns true if the DSP transfer was never started. This false-positive leads to multiple second delays when ca0132_setup_efaults() times out on each write. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check if dspload_image succeeded.Dylan Reid
If dspload_image() fails, it was ignored and dspload_wait_loaded() was still called. dsp_loaded should never be set to true in this case, skip it. The check in dspload_wait_loaded() return true if the DSP is loaded or if it never started. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-14ALSA: hda - Disable IDT eapd_switch if there are no internal speakersDavid Henningsson
If there are no internal speakers, we should not turn the eapd switch off, because it might be necessary to keep high for Headphone. BugLink: https://bugs.launchpad.net/bugs/1155016 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct valueTakashi Iwai
In the connection list expansion in hda_codec.c and hda_proc.c, the value returned from snd_hda_get_num_raw_conns() is used as the array size to store the connection list. However, the function returns simply a raw value of the AC_PAR_CONNLIST_LEN parameter, and the widget list with ranges isn't considered there. Thus it may return a smaller size than the actual list, which results in -ENOSPC in snd_hda_get_raw_conections(). This patch fixes the bug by parsing the connection list correctly also for snd_hda_get_num_raw_conns(). Reported-and-tested-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12ALSA: usb-audio: add a workaround for the NuForce UDH-100Clemens Ladisch
The NuForce UDH-100 numbers its interfaces incorrectly, which makes the interface associations come out wrong, which results in the driver erroring out with the message "Audio class v2 interfaces need an interface association". Work around this by searching for the interface association descriptor also in some other place where it might have ended up. Reported-and-tested-by: Dave Helstroom <helstroom@google.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-12ALSA: asihpi - fix potential NULL pointer dereferenceWei Yongjun
The dereference should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-11ALSA: seq: Fix missing error handling in snd_seq_timer_open()Takashi Iwai
snd_seq_timer_open() didn't catch the whole error path but let through if the timer id is a slave. This may lead to Oops by accessing the uninitialized pointer. BUG: unable to handle kernel NULL pointer dereference at 00000000000002ae IP: [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 PGD 785cd067 PUD 76964067 PMD 0 Oops: 0002 [#4] SMP CPU 0 Pid: 4288, comm: trinity-child7 Tainted: G D W 3.9.0-rc1+ #100 Bochs Bochs RIP: 0010:[<ffffffff819b3477>] [<ffffffff819b3477>] snd_seq_timer_open+0xe7/0x130 RSP: 0018:ffff88006ece7d38 EFLAGS: 00010246 RAX: 0000000000000286 RBX: ffff88007851b400 RCX: 0000000000000000 RDX: 000000000000ffff RSI: ffff88006ece7d58 RDI: ffff88006ece7d38 RBP: ffff88006ece7d98 R08: 000000000000000a R09: 000000000000fffe R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8800792c5400 R14: 0000000000e8f000 R15: 0000000000000007 FS: 00007f7aaa650700(0000) GS:ffff88007f800000(0000) GS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002ae CR3: 000000006efec000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process trinity-child7 (pid: 4288, threadinfo ffff88006ece6000, task ffff880076a8a290) Stack: 0000000000000286 ffffffff828f2be0 ffff88006ece7d58 ffffffff810f354d 65636e6575716573 2065756575712072 ffff8800792c0030 0000000000000000 ffff88006ece7d98 ffff8800792c5400 ffff88007851b400 ffff8800792c5520 Call Trace: [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff819b17e9>] snd_seq_queue_timer_open+0x29/0x70 [<ffffffff819ae01a>] snd_seq_ioctl_set_queue_timer+0xda/0x120 [<ffffffff819acb9b>] snd_seq_do_ioctl+0x9b/0xd0 [<ffffffff819acbe0>] snd_seq_ioctl+0x10/0x20 [<ffffffff811b9542>] do_vfs_ioctl+0x522/0x570 [<ffffffff8130a4b3>] ? file_has_perm+0x83/0xa0 [<ffffffff810f354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff811b95ed>] sys_ioctl+0x5d/0xa0 [<ffffffff813663fe>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81faed69>] system_call_fastpath+0x16/0x1b Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: ice1712: Initialize card->private_data properlySean Connor
Set card->private_data in snd_ice1712_create for fixing NULL dereference in snd_ice1712_remove(). Signed-off-by: Sean Connor <sconnor004@allyinics.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda - Add support of new codec ALC233Kailang Yang
It's compatible with ALC282. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda/ca0132 - Avoid division by zero in dspxfr_one_seg()Xi Wang
Move the zero check `hda_frame_size_words == 0' before the modulus `buffer_size_words % hda_frame_size_words'. Also remove the redundant null check `buffer_addx == NULL'. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda - check NULL pointer when creating SPDIF PCM switchMengdong Lin
If the new control cannot be created, this function will return to avoid snd_hda_ctl_add dereferencing a NULL control pointer. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda - check NULL pointer when creating SPDIF controlsMengdong Lin
If the SPDIF control array cannot be reallocated, the function will return to avoid dereferencing a NULL pointer. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07Merge tag 'asoc-v3.9-rc1' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.9 A few driver fixes, none of them terribly dramatic.
2013-03-07Merge remote-tracking branch 'asoc/fix/wm8960' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/wm8350' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/tegra' into tmpMark Brown
2013-03-07Merge remote-tracking branch 'asoc/fix/arizona' into tmpMark Brown
2013-03-06ASoC: wm5102: Apply a SYSCLK patch for later revsMark Brown
Evaluation has identified some performance improvements to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-05ALSA: vmaster: Fix slave change notificationTakashi Iwai
When a value of a vmaster slave control is changed, the ctl change notification is sometimes ignored. This happens when the master control overrides, e.g. when the corresponding master control is muted. The reason is that slave_put() returns the value of the actual slave put callback, and it doesn't reflect the virtual slave value change. This patch fixes the function just to return 1 whenever a slave value is changed. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-05ASoC: tegra: fix I2S bit count maskStephen Warren
This register field is 11 bits wide, not 15 bits wide. Given the way this value is currently, used, this patch has no practical effect. However, it's still best if the value is correct. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-04ALSA: seq: seq_oss_event: missing range checksDan Carpenter
The "dev" variable could be out of bounds. Calling snd_seq_oss_synth_is_valid() checks that it is is a valid device which has been opened. We check this inside set_note_event() so this function can't succeed without a valid "dev". But we need to do the check earlier to prevent invalid dereferences and memory corruption. One call tree where "dev" could be out of bounds is: -> snd_seq_oss_oob_user() -> snd_seq_oss_process_event() -> extended_event() -> note_on_event() Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-03ASoC: wm8350: Use jiffies rather than msecs in schedule_delayed_work()Axel Lin
The delay parameter of schedule_delayed_work() is number of jiffies to wait rather than miliseconds. Before commit 6d3c26bcb "ASoC: Use delayed work to debounce WM8350 jack IRQs", the debounce time is 200 miliseconds in wm8350_hp_jack_handler(). So I think this is a bug when convert to use delayed work. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01ASoC: wm5110: Correct OUT2/3 volume and switch namesCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01ASoC: wm5102: Correct OUT2 volume and switch namesCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01ASoC: wm8960: Fix ADC power bitsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-01ASoC: wm8960: Correct register 0 and 1 defaultsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-02-27Merge tag 'sound-3.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing serious but just a few regression fixes and quirk additions, such as emu1010 firmware loading fixes, M-Audio AP192 SPDIF fix, and HD-audio HDMI jack detection fix." * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: emu10k1: Allow to switch hardware sampe rate on EMU ALSA: hda - Enable beep for ASUS EeeBox EBP1501P ALSA: emu10k1: Load firmware when it was already cached ALSA: ice1724: M-Audio Audiophile192: Fix SPDIF input ALSA: bt87x: Make load_all parameter working again ALSA: emu10k1: Fix regression in emu1010 firmware loading ALSA: hda - hdmi: Make jacks phantom, if they're not detectable
2013-02-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-25Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module update from Rusty Russell: "The sweeping change is to make add_taint() explicitly indicate whether to disable lockdep, but it's a mechanical change." * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MODSIGN: Add option to not sign modules during modules_install MODSIGN: Add -s <signature> option to sign-file MODSIGN: Specify the hash algorithm on sign-file command line MODSIGN: Simplify Makefile with a Kconfig helper module: clean up load_module a little more. modpost: Ignore ARC specific non-alloc sections module: constify within_module_* taint: add explicit flag to show whether lock dep is still OK. module: printk message when module signature fail taints kernel.
2013-02-25ALSA: emu10k1: Allow to switch hardware sampe rate on EMUMihail Zenkov
Commit 57e5c63007955838043e34c732d224b2cbbb128f "emu10k1: allow to disable the SRC" force hardware use only one rate (48000 hz). EMU 0404/1010/1616 have support two hardware sampling rates (44100 and 48000 hz). This patch add check if we have EMU 0404/1010/1616 and choose correct sample rate to restrict. Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: hda - Enable beep for ASUS EeeBox EBP1501PTakashi Iwai
Reported-by: Harald Becker <ralda@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: emu10k1: Load firmware when it was already cachedFlorian Zeitz
This expands the regression fix from d28215996b0c3a900411769039aa3c54cf7008ab. The firmware also needs to be loaded when it was already cached. Signed-off-by: Florian Zeitz <florob@babelmonkeys.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: ice1724: M-Audio Audiophile192: Fix SPDIF inputJonas Petersen
This patch fixes initialization of the AK4114 chip so spdif capture is working properly. Worked out together with Pavel Hofman. Signed-off-by: Jonas Petersen <jnsptrsn1@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: bt87x: Make load_all parameter working againTakashi Iwai
Along with a clean up commit [e9f66d9b9: ALSA: pci: clean up using module_pci_driver()], bt87x driver lost the functionality of load_all parameter. This patch does a partial revert of the commit only for bt87x.c to recover it. Reported-by: Clemens Ladisch <cladisch@googlemail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "So from the depth of frozen Minnesota, here's the powerpc pull request for 3.9. It has a few interesting highlights, in addition to the usual bunch of bug fixes, minor updates, embedded device tree updates and new boards: - Hand tuned asm implementation of SHA1 (by Paulus & Michael Ellerman) - Support for Doorbell interrupts on Power8 (kind of fast thread-thread IPIs) by Ian Munsie - Long overdue cleanup of the way we handle relocation of our open firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard - Support for saving/restoring & context switching the PPR (Processor Priority Register) on server processors that support it. This allows the kernel to preserve thread priorities established by userspace. By Haren Myneni. - DAWR (new watchpoint facility) support on Power8 by Michael Neuling - Ability to change the DSCR (Data Stream Control Register) which controls cache prefetching on a running process via ptrace by Alexey Kardashevskiy - Support for context switching the TAR register on Power8 (new branch target register meant to be used by some new specific userspace perf event interrupt facility which is yet to be enabled) by Ian Munsie. - Improve preservation of the CFAR register (which captures the origin of a branch) on various exception conditions by Paulus. - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where it belongs by Philippe De Muyter - Support for Transactional Memory on Power8 by Michael Neuling (based on original work by Matt Evans). For those curious about the feature, the patch contains a pretty good description." (See commit db8ff907027b: "powerpc: Documentation for transactional memory on powerpc" for the mentioned description added to the file Documentation/powerpc/transactional_memory.txt) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits) powerpc/kexec: Disable hard IRQ before kexec powerpc/85xx: l2sram - Add compatible string for BSC9131 platform powerpc/85xx: bsc9131 - Correct typo in SDHC device node powerpc/e500/qemu-e500: enable coreint powerpc/mpic: allow coreint to be determined by MPIC version powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct powerpc/85xx: Board support for ppa8548 powerpc/fsl: remove extraneous DIU platform functions arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test powerpc: Documentation for transactional memory on powerpc powerpc: Add transactional memory to pseries and ppc64 defconfigs powerpc: Add config option for transactional memory powerpc: Add transactional memory to POWER8 cpu features powerpc: Add new transactional memory state to the signal context powerpc: Hook in new transactional memory code powerpc: Routines for FP/VSX/VMX unavailable during a transaction powerpc: Add transactional memory unavaliable execption handler powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes powerpc: Add FP/VSX and VMX register load functions for transactional memory powerpc: Add helper functions for transactional memory context switching ...
2013-02-23new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22ALSA: emu10k1: Fix regression in emu1010 firmware loadingMihail Zenkov
This patch fix regression in emu1010 firmware loading after http://git.alsa-project.org/?p=alsa-kprivate.git;a=commitdiff;h=b209c4dfcd960ab176d4746ab7dc442a3edb4575 I just revert small part of this commit. Tested on emu1212m pci. Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-22ALSA: hda - hdmi: Make jacks phantom, if they're not detectableDavid Henningsson
Just as for analog codecs, a jack that isn't suitable for detection (in this case, NO_PRESENCE was set) should be a phantom Jack instead of a normal one. Thanks to Raymond Yau for spotting. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/961286 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>