Merge git://git.denx.de/u-boot-sunxi

19 files changed, 1028 insertions, 603 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2b1a4e9..b95920a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -309,6 +309,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-pc-plus.dtb \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-nanopi-m1.dtb \
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-nanopi-neo-air.dtb
 dtb-$(CONFIG_MACH_SUN8I_R40) += \
@@ -316,8 +317,10 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
 dtb-$(CONFIG_MACH_SUN8I_V3S) += \
 	sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN50I_H5) += \
-	sun50i-h5-orangepi-pc2.dtb
+	sun50i-h5-orangepi-pc2.dtb \
+	sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
+	sun50i-a64-bananapi-m64.dtb \
 	sun50i-a64-pine64-plus.dtb \
 	sun50i-a64-pine64.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
new file mode 100644
index 0000000..02db114
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "BananaPi-M64";
+	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
new file mode 100644
index 0000000..9c61bea
--- /dev/null
+++ b/arch/arm/dts/sun50i-a64-pine64-plus-u-boot.dtsi
@@ -0,0 +1,50 @@
+/ {
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	soc {
+		emac: ethernet@01c30000 {
+			compatible = "allwinner,sun50i-a64-emac";
+			reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
+			reg-names = "emac", "syscon";
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ccu RST_BUS_EMAC>;
+			reset-names = "ahb";
+			clocks = <&ccu CLK_BUS_EMAC>;
+			clock-names = "ahb";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&rgmii_pins>;
+			phy-mode = "rgmii";
+			phy = <&phy1>;
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
+	};
+};
+
+&pio {
+	rmii_pins: rmii_pins {
+		allwinner,pins = "PD10", "PD11", "PD13", "PD14",
+				 "PD17", "PD18", "PD19", "PD20",
+				 "PD22", "PD23";
+		allwinner,function = "emac";
+		allwinner,drive = <3>;
+		allwinner,pull = <0>;
+	};
+
+	rgmii_pins: rgmii_pins {
+		allwinner,pins = "PD8", "PD9", "PD10", "PD11",
+				 "PD12", "PD13", "PD15",
+				 "PD16", "PD17", "PD18", "PD19",
+				 "PD20", "PD21", "PD22", "PD23";
+		allwinner,function = "emac";
+		allwinner,drive = <3>;
+		allwinner,pull = <0>;
+	};
+};
diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts
index 389c609..790d14d 100644
--- a/arch/arm/dts/sun50i-a64-pine64-plus.dts
+++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts
@@ -40,33 +40,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-
-#include "sun50i-a64-pine64-common.dtsi"
+#include "sun50i-a64-pine64.dts"
 
 / {
 	model = "Pine64+";
 	compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	/* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */
-	memory {
-		reg = <0x40000000 0x40000000>;
-	};
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
-	phy = <&phy1>;
-	status = "okay";
-
-	phy1: ethernet-phy@1 {
-	reg = <1>;
-	};
+	/* TODO: Camera, Ethernet PHY, touchscreen, etc. */
 };
-
diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts
index ebe029e..c680ed3 100644
--- a/arch/arm/dts/sun50i-a64-pine64.dts
+++ b/arch/arm/dts/sun50i-a64-pine64.dts
@@ -42,17 +42,70 @@
 
 /dts-v1/;
 
-#include "sun50i-a64-pine64-common.dtsi"
+#include "sun50i-a64.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Pine64";
 	compatible = "pine64,pine64", "allwinner,sun50i-a64";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
-		reg = <0x40000000 0x20000000>;
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 };
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c1_pins {
+	bias-pull-up;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi
index bef0d00..c7f669f 100644
--- a/arch/arm/dts/sun50i-a64.dtsi
+++ b/arch/arm/dts/sun50i-a64.dtsi
@@ -42,8 +42,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/clock/sun50i-a64-ccu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/reset/sun50i-a64-ccu.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -54,28 +55,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a53", "arm,armv8";
 			device_type = "cpu";
 			reg = <3>;
@@ -83,28 +84,31 @@
 		};
 	};
 
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
+	osc24M: osc24M_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	osc32k: osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "osc32k";
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0>;
+	iosc: internal-osc-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <16000000>;
+		clock-accuracy = <300000000>;
+		clock-output-names = "iosc";
 	};
 
-	gic: interrupt-controller@1c81000 {
-		compatible = "arm,gic-400";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-
-		reg = <0x01c81000 0x1000>,
-		      <0x01c82000 0x2000>,
-		      <0x01c84000 0x2000>,
-		      <0x01c86000 0x2000>;
-		interrupts = <GIC_PPI 9
-		      (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
 	};
 
 	timer {
@@ -119,199 +123,6 @@
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: osc32k_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: pll1_clk@1c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll6: pll6_clk@1c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		pll6d2: pll6d2_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-factor-clock";
-			clock-div = <2>;
-			clock-mult = <1>;
-			clocks = <&pll6 0>;
-			clock-output-names = "pll6d2";
-		};
-
-		pll7: pll7_clk@1c2002c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c2002c 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll7", "pll7x2";
-		};
-
-		cpu: cpu_clk@1c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-			critical-clocks = <0>;
-		};
-
-		axi: axi_clk@1c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@1c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		ahb2: ahb2_clk@1c2005c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-h3-ahb2-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&ahb1>, <&pll6d2>;
-			clock-output-names = "ahb2";
-		};
-
-		apb1: apb1_clk@1c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		apb2: apb2_clk@1c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>;
-			clock-output-names = "apb2";
-		};
-
-		bus_gates: bus_gates_clk@1c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun50i-a64-bus-gates-clk",
-				     "allwinner,sunxi-multi-bus-gates-clk";
-			reg = <0x01c20060 0x14>;
-			ahb1_parent {
-				clocks = <&ahb1>;
-				clock-indices = <1>, <5>,
-						<6>, <8>,
-						<9>, <10>,
-						<13>, <14>,
-						<18>, <19>,
-						<20>, <21>,
-						<23>, <24>,
-						<25>, <28>,
-						<32>, <35>,
-						<36>, <37>,
-						<40>, <43>,
-						<44>, <52>,
-						<53>, <54>,
-						<135>;
-				clock-output-names = "bus_mipidsi", "bus_ce",
-						"bus_dma", "bus_mmc0",
-						"bus_mmc1", "bus_mmc2",
-						"bus_nand", "bus_sdram",
-						"bus_ts", "bus_hstimer",
-						"bus_spi0", "bus_spi1",
-						"bus_otg", "bus_otg_ehci0",
-						"bus_ehci0", "bus_otg_ohci0",
-						"bus_ve", "bus_lcd0",
-						"bus_lcd1", "bus_deint",
-						"bus_csi", "bus_hdmi",
-						"bus_de", "bus_gpu",
-						"bus_msgbox", "bus_spinlock",
-						"bus_dbg";
-			};
-			ahb2_parent {
-				clocks = <&ahb2>;
-				clock-indices = <17>, <29>;
-				clock-output-names = "bus_gmac", "bus_ohci0";
-			};
-			apb1_parent {
-				clocks = <&apb1>;
-				clock-indices = <64>, <65>,
-						<69>, <72>,
-						<76>, <77>,
-						<78>;
-				clock-output-names = "bus_codec", "bus_spdif",
-						"bus_pio", "bus_ths",
-						"bus_i2s0", "bus_i2s1",
-						"bus_i2s2";
-			};
-			abp2_parent {
-				clocks = <&apb2>;
-				clock-indices = <96>, <97>,
-						<98>, <101>,
-						<112>, <113>,
-						<114>, <115>,
-						<116>;
-				clock-output-names = "bus_i2c0", "bus_i2c1",
-						"bus_i2c2", "bus_scr",
-						"bus_uart0", "bus_uart1",
-						"bus_uart2", "bus_uart3",
-						"bus_uart4";
-			};
-		};
-
-		mmc0_clk: mmc0_clk@1c20088 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-			clock-output-names = "mmc0";
-                };
-
-		mmc1_clk: mmc1_clk@1c2008c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-			clock-output-names = "mmc1";
-		};
-
-		mmc2_clk: mmc2_clk@1c20090 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll7 1>;
-			clock-output-names = "mmc2";
-		};
-	};
-
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -319,240 +130,181 @@
 		ranges;
 
 		mmc0: mmc@1c0f000 {
-			compatible = "allwinner,sun50i-a64-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun50i-a64-mmc";
 			reg = <0x01c0f000 0x1000>;
-			clocks = <&bus_gates 8>, <&mmc0_clk>,
-				 <&mmc0_clk>, <&mmc0_clk>;
-			clock-names = "ahb", "mmc",
-				      "output", "sample";
-			resets = <&ahb_rst 8>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
 		mmc1: mmc@1c10000 {
-			compatible = "allwinner,sun50i-a64-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun50i-a64-mmc";
 			reg = <0x01c10000 0x1000>;
-			clocks = <&bus_gates 9>, <&mmc1_clk>,
-				 <&mmc1_clk>, <&mmc1_clk>;
-			clock-names = "ahb", "mmc",
-				      "output", "sample";
-			resets = <&ahb_rst 9>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
 		mmc2: mmc@1c11000 {
-			compatible = "allwinner,sun50i-a64-mmc",
-				     "allwinner,sun5i-a13-mmc";
+			compatible = "allwinner,sun50i-a64-emmc";
 			reg = <0x01c11000 0x1000>;
-			clocks = <&bus_gates 10>, <&mmc2_clk>,
-				 <&mmc2_clk>, <&mmc2_clk>;
-			clock-names = "ahb", "mmc",
-				      "output", "sample";
-			resets = <&ahb_rst 10>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			max-frequency = <200000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun8i-a33-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun50i-a64-usb-phy";
+			reg = <0x01c19400 0x14>,
+			      <0x01c1a800 0x4>,
+			      <0x01c1b800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0",
+				    "pmu1";
+			clocks = <&ccu CLK_USB_PHY0>,
+				 <&ccu CLK_USB_PHY1>;
+			clock-names = "usb0_phy",
+				      "usb1_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>;
+			reset-names = "usb0_reset",
+				      "usb1_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ehci1: usb@01c1b000 {
+			compatible = "allwinner,sun50i-a64-ehci", "generic-ehci";
+			reg = <0x01c1b000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_BUS_EHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>,
+				 <&ccu RST_BUS_EHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@01c1b400 {
+			compatible = "allwinner,sun50i-a64-ohci", "generic-ohci";
+			reg = <0x01c1b400 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_OHCI1>,
+				 <&ccu CLK_USB_OHCI1>;
+			resets = <&ccu RST_BUS_OHCI1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun50i-a64-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
 		pio: pinctrl@1c20800 {
 			compatible = "allwinner,sun50i-a64-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 69>;
+			clocks = <&ccu 58>;
 			gpio-controller;
 			#gpio-cells = <3>;
 			interrupt-controller;
-			#interrupt-cells = <2>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB8", "PB9";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart0_pins_b: uart0@1 {
-				allwinner,pins = "PF2", "PF3";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart1_2pins: uart1_2@0 {
-				allwinner,pins = "PG6", "PG7";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart1_4pins: uart1_4@0 {
-				allwinner,pins = "PG6", "PG7", "PG8", "PG9";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart2_2pins: uart2_2@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "uart2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart2_4pins: uart2_4@0 {
-				allwinner,pins = "PB0", "PB1", "PB2", "PB3";
-				allwinner,function = "uart2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PD0", "PD1";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart3_2pins_b: uart3_2@1 {
-				allwinner,pins = "PH4", "PH5";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
+			#interrupt-cells = <3>;
 
-			uart3_4pins_b: uart3_4@1 {
-				allwinner,pins = "PH4", "PH5", "PH6", "PH7";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart4_2pins: uart4_2@0 {
-				allwinner,pins = "PD2", "PD3";
-				allwinner,function = "uart4";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart4_4pins: uart4_4@0 {
-				allwinner,pins = "PD2", "PD3", "PD4", "PD5";
-				allwinner,function = "uart4";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins: mmc0@0 {
-				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
-						 "PF4", "PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_default_cd_pin: mmc0_cd_pin@0 {
-				allwinner,pins = "PF6";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc1_pins: mmc1@0 {
-				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
-						 "PG4", "PG5";
-				allwinner,function = "mmc1";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			i2c1_pins: i2c1_pins {
+				pins = "PH2", "PH3";
+				function = "i2c1";
 			};
 
-			mmc2_pins: mmc2@0 {
-				allwinner,pins = "PC1", "PC5", "PC6", "PC8",
-						 "PC9", "PC10";
-				allwinner,function = "mmc2";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
-			i2c0_pins: i2c0_pins {
-				allwinner,pins = "PH0", "PH1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
-			i2c1_pins: i2c1_pins {
-				allwinner,pins = "PH2", "PH3";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			mmc2_pins: mmc2-pins {
+				pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+				       "PC10","PC11", "PC12", "PC13",
+				       "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
 			};
 
-			i2c2_pins: i2c2_pins {
-				allwinner,pins = "PE14", "PE15";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart0_pins_a: uart0@0 {
+				pins = "PB8", "PB9";
+				function = "uart0";
 			};
 
-			rmii_pins: rmii_pins {
-				allwinner,pins = "PD10", "PD11", "PD13", "PD14",
-						 "PD17", "PD18", "PD19", "PD20",
-						 "PD22", "PD23";
-				allwinner,function = "emac";
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart1_pins: uart1_pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
 			};
 
-			rgmii_pins: rgmii_pins {
-				allwinner,pins = "PD8", "PD9", "PD10", "PD11",
-						 "PD12", "PD13", "PD15",
-						 "PD16", "PD17", "PD18", "PD19",
-						 "PD20", "PD21", "PD22", "PD23";
-				allwinner,function = "emac";
-				allwinner,drive = <SUN4I_PINCTRL_40_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			uart1_rts_cts_pins: uart1_rts_cts_pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
 			};
 		};
 
-		ahb_rst: reset@1c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@1c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@1c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
 		uart0: serial@1c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 112>;
-			resets = <&apb2_rst 16>;
+			clocks = <&ccu 67>;
+			resets = <&ccu 46>;
 			status = "disabled";
 		};
 
@@ -562,8 +314,8 @@
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 113>;
-			resets = <&apb2_rst 17>;
+			clocks = <&ccu 68>;
+			resets = <&ccu 47>;
 			status = "disabled";
 		};
 
@@ -573,8 +325,8 @@
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 114>;
-			resets = <&apb2_rst 18>;
+			clocks = <&ccu 69>;
+			resets = <&ccu 48>;
 			status = "disabled";
 		};
 
@@ -584,8 +336,8 @@
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 115>;
-			resets = <&apb2_rst 19>;
+			clocks = <&ccu 70>;
+			resets = <&ccu 49>;
 			status = "disabled";
 		};
 
@@ -595,24 +347,17 @@
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&bus_gates 116>;
-			resets = <&apb2_rst 20>;
+			clocks = <&ccu 71>;
+			resets = <&ccu 50>;
 			status = "disabled";
 		};
 
-		rtc: rtc@1f00000 {
-			compatible = "allwinner,sun6i-a31-rtc";
-			reg = <0x01f00000 0x54>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
 		i2c0: i2c@1c2ac00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 96>;
-			resets = <&apb2_rst 0>;
+			clocks = <&ccu 63>;
+			resets = <&ccu 42>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -622,8 +367,8 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 97>;
-			resets = <&apb2_rst 1>;
+			clocks = <&ccu 64>;
+			resets = <&ccu 43>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -633,54 +378,50 @@
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&bus_gates 98>;
-			resets = <&apb2_rst 2>;
+			clocks = <&ccu 65>;
+			resets = <&ccu 44>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		emac: ethernet@01c30000 {
-			compatible = "allwinner,sun50i-a64-emac";
-			reg = <0x01c30000 0x2000>, <0x01c00030 0x4>;
-			reg-names = "emac", "syscon";
-			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-			resets = <&ahb_rst 17>;
-			reset-names = "ahb";
-			clocks = <&bus_gates 17>;
-			clock-names = "ahb";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 
-		usbphy: phy@1c1b810 {
-			compatible = "allwinner,sun50i-a64-usb-phy",
-				     "allwinner,sun8i-a33-usb-phy";
-			reg = <0x01c1b810 0x14>, <0x01c1b800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			status = "disabled";
-			#phy-cells = <1>;
+		rtc: rtc@1f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		ehci1: usb@01c1b000 {
-			compatible = "allwinner,sun50i-a64-ehci",
-				     "generic-ehci";
-			reg = <0x01c1b000 0x100>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
+		r_ccu: clock@1f01400 {
+			compatible = "allwinner,sun50i-a64-r-ccu";
+			reg = <0x01f01400 0x100>;
+			clocks = <&osc24M>, <&osc32k>, <&iosc>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
 		};
 
-		ohci1: usb@01c1b400 {
-			compatible = "allwinner,sun50i-a64-ohci",
-				     "generic-ohci";
-			reg = <0x01c1b400 0x100>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "enabled";
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun50i-a64-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
 		};
 	};
 };
diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index de60f78..780d59a 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -42,40 +42,14 @@
 
 /dts-v1/;
 
-#include "sun8i-h3.dtsi"
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "OrangePi PC 2";
 	compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
 
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			enable-method = "psci";
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			enable-method = "psci";
-		};
-		cpu@2 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			enable-method = "psci";
-		};
-		cpu@3 {
-			compatible = "arm,cortex-a53", "arm,armv8";
-			enable-method = "psci";
-		};
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-	};
-
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -99,10 +73,6 @@
 	};
 };
 
-&gic {
-	compatible = "arm,gic-400";
-};
-
 &mmc0 {
 	compatible = "allwinner,sun50i-h5-mmc",
 		     "allwinner,sun50i-a64-mmc",
@@ -111,7 +81,7 @@
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 0>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
 };
diff --git a/arch/arm/dts/sun50i-a64-pine64-common.dtsi b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
index 9ec81c6..67eade7 100644
--- a/arch/arm/dts/sun50i-a64-pine64-common.dtsi
+++ b/arch/arm/dts/sun50i-h5-orangepi-prime.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2016 ARM Ltd.
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -40,13 +40,26 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "sun50i-a64.dtsi"
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
 
 / {
+	model = "OrangePi Prime";
+	compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
 
 	aliases {
 		serial0 = &uart0;
-		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
 	};
 
 	soc {
@@ -60,10 +73,14 @@
 };
 
 &mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc",
+		     "allwinner,sun5i-a13-mmc";
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
 	vmmc-supply = <&reg_vcc3v3>;
-	cd-gpios = <&pio 5 6 0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 	status = "okay";
 };
@@ -74,20 +91,14 @@
 	status = "okay";
 };
 
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	status = "okay";
-};
-
 &usbphy {
-       status = "okay";
+	status = "okay";
 };
 
 &ohci1 {
-       status = "okay";
+	status = "okay";
 };
 
 &ehci1 {
-       status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/dts/sun50i-h5.dtsi b/arch/arm/dts/sun50i-h5.dtsi
new file mode 100644
index 0000000..4904c18
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5.dtsi
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3.dtsi"
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@2 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+		cpu@3 {
+			compatible = "arm,cortex-a53", "arm,armv8";
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+	};
+};
+
+&gic {
+	compatible = "arm,gic-400";
+};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
new file mode 100644
index 0000000..ec63d10
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-nanopi-m1.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyArm NanoPi M1";
+	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
index 096ff0b..5113059 100644
--- a/arch/arm/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo.dts
@@ -40,88 +40,11 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-/dts-v1/;
-#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-h3-nanopi.dtsi"
 
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
-	aliases {
-		serial0 = &uart0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
-
-		pwr {
-			label = "nanopi:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
-			default-state = "on";
-		};
-
-		status {
-			label = "nanopi:blue:status";
-			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
-		};
-	};
-};
-
-&ehci3 {
-	status = "okay";
-};
-
-&mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
-	cd-inverted;
-	status = "okay";
-};
-
-&ohci3 {
-	status = "okay";
-};
-
-&pio {
-	leds_opc: led-pins {
-		allwinner,pins = "PA10";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&r_pio {
-	leds_r_opc: led-pins {
-		allwinner,pins = "PL10";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usbphy {
-	/* USB VBUS is always on */
-	status = "okay";
 };
 
 &emac {
diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi
new file mode 100644
index 0000000..c6decee
--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2016 James Pettigrew <james@innovum.com.au>
+ * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_npi>, <&leds_r_npi>;
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	r_gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "k1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&sw_r_npi>;
+
+		k1@0 {
+			label = "k1";
+			linux,code = <KEY_POWER>;
+			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	leds_npi: led_pins@0 {
+		pins = "PA10";
+		function = "gpio_out";
+	};
+};
+
+&r_pio {
+	leds_r_npi: led_pins@0 {
+		pins = "PL10";
+		function = "gpio_out";
+	};
+
+	sw_r_npi: key_pins@0 {
+		pins = "PL3";
+		function = "gpio_in";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index a512a20..0f1290a 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -114,6 +114,11 @@ S:	Maintained
 F:	configs/Bananapi_M2_Ultra_defconfig
 F:	arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
 
+BANANAPI M64
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/bananapi_m64_defconfig
+
 COLOMBUS BOARD
 M:	Maxime Ripard <maxime.ripard@free-electrons.com>
 S:	Maintained
@@ -237,6 +242,11 @@ M:	Siarhei Siamashka <siarhei.siamashka@gmail.com>
 S:	Maintained
 F:	configs/MSI_Primo81_defconfig
 
+NANOPI-M1 BOARD
+M:	Mylène Josserand <mylene.josserand@free-electrons.com>
+S:	Maintained
+F:	configs/nanopi_m1_defconfig
+
 NANOPI-NEO BOARD
 M:	Jelle van der Waa <jelle@vdwaa.nl>
 S:	Maintained
@@ -262,6 +272,11 @@ M:	Andre Przywara <andre.przywara@arm.com>
 S:	Maintained
 F:	configs/orangepi_pc2_defconfig
 
+ORANGEPI PRIME BOARD
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/orangepi_prime_defconfig
+
 PINE64 BOARDS
 M:	Andre Przywara <andre.przywara@arm.com>
 S:	Maintained
diff --git a/configs/Sinlinx_SinA33_defconfig b/configs/Sinlinx_SinA33_defconfig
index 8a51bf3..d1b5b22 100644
--- a/configs/Sinlinx_SinA33_defconfig
+++ b/configs/Sinlinx_SinA33_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_CONS_INDEX=1
 CONFIG_MACH_SUN8I_A33=y
 CONFIG_DRAM_CLK=552
 CONFIG_DRAM_ZQ=15291
diff --git a/configs/bananapi_m64_defconfig b/configs/bananapi_m64_defconfig
new file mode 100644
index 0000000..3908d42
--- /dev/null
+++ b/configs/bananapi_m64_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I=y
+CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y
+CONFIG_MMC0_CD_PIN="PH13"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-bananapi-m64"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/nanopi_m1_defconfig b/configs/nanopi_m1_defconfig
new file mode 100644
index 0000000..498496b
--- /dev/null
+++ b/configs/nanopi_m1_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-m1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_USB_EHCI_HCD=y
diff --git a/configs/orangepi_prime_defconfig b/configs/orangepi_prime_defconfig
new file mode 100644
index 0000000..dc8d59e
--- /dev/null
+++ b/configs/orangepi_prime_defconfig
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881977
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-prime"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/include/dt-bindings/clock/sun50i-a64-ccu.h b/include/dt-bindings/clock/sun50i-a64-ccu.h
new file mode 100644
index 0000000..370c0a0
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-a64-ccu.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_
+#define _DT_BINDINGS_CLK_SUN50I_A64_H_
+
+#define CLK_BUS_MIPI_DSI	28
+#define CLK_BUS_CE		29
+#define CLK_BUS_DMA		30
+#define CLK_BUS_MMC0		31
+#define CLK_BUS_MMC1		32
+#define CLK_BUS_MMC2		33
+#define CLK_BUS_NAND		34
+#define CLK_BUS_DRAM		35
+#define CLK_BUS_EMAC		36
+#define CLK_BUS_TS		37
+#define CLK_BUS_HSTIMER		38
+#define CLK_BUS_SPI0		39
+#define CLK_BUS_SPI1		40
+#define CLK_BUS_OTG		41
+#define CLK_BUS_EHCI0		42
+#define CLK_BUS_EHCI1		43
+#define CLK_BUS_OHCI0		44
+#define CLK_BUS_OHCI1		45
+#define CLK_BUS_VE		46
+#define CLK_BUS_TCON0		47
+#define CLK_BUS_TCON1		48
+#define CLK_BUS_DEINTERLACE	49
+#define CLK_BUS_CSI		50
+#define CLK_BUS_HDMI		51
+#define CLK_BUS_DE		52
+#define CLK_BUS_GPU		53
+#define CLK_BUS_MSGBOX		54
+#define CLK_BUS_SPINLOCK	55
+#define CLK_BUS_CODEC		56
+#define CLK_BUS_SPDIF		57
+#define CLK_BUS_PIO		58
+#define CLK_BUS_THS		59
+#define CLK_BUS_I2S0		60
+#define CLK_BUS_I2S1		61
+#define CLK_BUS_I2S2		62
+#define CLK_BUS_I2C0		63
+#define CLK_BUS_I2C1		64
+#define CLK_BUS_I2C2		65
+#define CLK_BUS_SCR		66
+#define CLK_BUS_UART0		67
+#define CLK_BUS_UART1		68
+#define CLK_BUS_UART2		69
+#define CLK_BUS_UART3		70
+#define CLK_BUS_UART4		71
+#define CLK_BUS_DBG		72
+#define CLK_THS			73
+#define CLK_NAND		74
+#define CLK_MMC0		75
+#define CLK_MMC1		76
+#define CLK_MMC2		77
+#define CLK_TS			78
+#define CLK_CE			79
+#define CLK_SPI0		80
+#define CLK_SPI1		81
+#define CLK_I2S0		82
+#define CLK_I2S1		83
+#define CLK_I2S2		84
+#define CLK_SPDIF		85
+#define CLK_USB_PHY0		86
+#define CLK_USB_PHY1		87
+#define CLK_USB_HSIC		88
+#define CLK_USB_HSIC_12M	89
+
+#define CLK_USB_OHCI0		91
+
+#define CLK_USB_OHCI1		93
+
+#define CLK_DRAM_VE		95
+#define CLK_DRAM_CSI		96
+#define CLK_DRAM_DEINTERLACE	97
+#define CLK_DRAM_TS		98
+#define CLK_DE			99
+#define CLK_TCON0		100
+#define CLK_TCON1		101
+#define CLK_DEINTERLACE		102
+#define CLK_CSI_MISC		103
+#define CLK_CSI_SCLK		104
+#define CLK_CSI_MCLK		105
+#define CLK_VE			106
+#define CLK_AC_DIG		107
+#define CLK_AC_DIG_4X		108
+#define CLK_AVS			109
+#define CLK_HDMI		110
+#define CLK_HDMI_DDC		111
+
+#define CLK_DSI_DPHY		113
+#define CLK_GPU			114
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */
diff --git a/include/dt-bindings/reset/sun50i-a64-ccu.h b/include/dt-bindings/reset/sun50i-a64-ccu.h
new file mode 100644
index 0000000..db60b29
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-a64-ccu.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_
+#define _DT_BINDINGS_RST_SUN50I_A64_H_
+
+#define RST_USB_PHY0		0
+#define RST_USB_PHY1		1
+#define RST_USB_HSIC		2
+#define RST_DRAM		3
+#define RST_MBUS		4
+#define RST_BUS_MIPI_DSI	5
+#define RST_BUS_CE		6
+#define RST_BUS_DMA		7
+#define RST_BUS_MMC0		8
+#define RST_BUS_MMC1		9
+#define RST_BUS_MMC2		10
+#define RST_BUS_NAND		11
+#define RST_BUS_DRAM		12
+#define RST_BUS_EMAC		13
+#define RST_BUS_TS		14
+#define RST_BUS_HSTIMER		15
+#define RST_BUS_SPI0		16
+#define RST_BUS_SPI1		17
+#define RST_BUS_OTG		18
+#define RST_BUS_EHCI0		19
+#define RST_BUS_EHCI1		20
+#define RST_BUS_OHCI0		21
+#define RST_BUS_OHCI1		22
+#define RST_BUS_VE		23
+#define RST_BUS_TCON0		24
+#define RST_BUS_TCON1		25
+#define RST_BUS_DEINTERLACE	26
+#define RST_BUS_CSI		27
+#define RST_BUS_HDMI0		28
+#define RST_BUS_HDMI1		29
+#define RST_BUS_DE		30
+#define RST_BUS_GPU		31
+#define RST_BUS_MSGBOX		32
+#define RST_BUS_SPINLOCK	33
+#define RST_BUS_DBG		34
+#define RST_BUS_LVDS		35
+#define RST_BUS_CODEC		36
+#define RST_BUS_SPDIF		37
+#define RST_BUS_THS		38
+#define RST_BUS_I2S0		39
+#define RST_BUS_I2S1		40
+#define RST_BUS_I2S2		41
+#define RST_BUS_I2C0		42
+#define RST_BUS_I2C1		43
+#define RST_BUS_I2C2		44
+#define RST_BUS_SCR		45
+#define RST_BUS_UART0		46
+#define RST_BUS_UART1		47
+#define RST_BUS_UART2		48
+#define RST_BUS_UART3		49
+#define RST_BUS_UART4		50
+
+#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */