diff options
author | Fabio Estevam <fabio.estevam@freescale.com> | 2012-03-29 02:22:50 (GMT) |
---|---|---|
committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2012-04-16 12:53:58 (GMT) |
commit | b6e80e24857a273e6c5c89e74f5d6a918dd2563f (patch) | |
tree | 810ed4ac2a105f10645c0a72a5786cb3be20271b | |
parent | 66b4170b294e84d1b8cdf8f1334703baeb9d8751 (diff) | |
download | u-boot-fsl-qoriq-b6e80e24857a273e6c5c89e74f5d6a918dd2563f.tar.xz |
mx6qsabrelite: Add boot switch setting information into the README
Add boot switch setting information into the README
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
-rw-r--r-- | doc/README.mx6qsabrelite | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/doc/README.mx6qsabrelite b/doc/README.mx6qsabrelite index 0498cba..6f2f534 100644 --- a/doc/README.mx6qsabrelite +++ b/doc/README.mx6qsabrelite @@ -31,7 +31,8 @@ Note: Replace sXx with the device representing the SD card in your system. Note: This writes SD card loader at address 0 2. Put this SD card into the slot for the large SD card (SD3 on the bottom of -the board) +the board). Make sure SW1 switch is at position "00", so that it can boot +from the fuses. 3. Power-up the SabreLite, press 'space' to enter command mode in the U-Boot (the default one the board is shipped with, starting from the SPI NOR) and |