arm: Remove smdk2410 board

This board has not been converted to DM_SERIAL by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: David Müller <d.mueller@elsoft.ch>

9 files changed, 0 insertions, 520 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3d00948..9c93129 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -152,10 +152,6 @@ config TARGET_VCMA9
 	bool "Support VCMA9"
 	select CPU_ARM920T
 
-config TARGET_SMDK2410
-	bool "Support smdk2410"
-	select CPU_ARM920T
-
 config TARGET_ASPENITE
 	bool "Support aspenite"
 	select CPU_ARM926EJS
@@ -1007,7 +1003,6 @@ source "board/olimex/mx23_olinuxino/Kconfig"
 source "board/phytec/pcm051/Kconfig"
 source "board/phytec/pcm052/Kconfig"
 source "board/ppcag/bg0900/Kconfig"
-source "board/samsung/smdk2410/Kconfig"
 source "board/sandisk/sansa_fuze_plus/Kconfig"
 source "board/schulercontrol/sc_sps_1/Kconfig"
 source "board/siemens/draco/Kconfig"
diff --git a/board/samsung/smdk2410/Kconfig b/board/samsung/smdk2410/Kconfig
deleted file mode 100644
index e987b64..0000000
--- a/board/samsung/smdk2410/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_SMDK2410
-
-config SYS_BOARD
-	default "smdk2410"
-
-config SYS_VENDOR
-	default "samsung"
-
-config SYS_SOC
-	default "s3c24x0"
-
-config SYS_CONFIG_NAME
-	default "smdk2410"
-
-endif
diff --git a/board/samsung/smdk2410/MAINTAINERS b/board/samsung/smdk2410/MAINTAINERS
deleted file mode 100644
index 12a25e8..0000000
--- a/board/samsung/smdk2410/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SMDK2410 BOARD
-M:	David Müller <d.mueller@elsoft.ch>
-S:	Maintained
-F:	board/samsung/smdk2410/
-F:	include/configs/smdk2410.h
-F:	configs/smdk2410_defconfig
diff --git a/board/samsung/smdk2410/Makefile b/board/samsung/smdk2410/Makefile
deleted file mode 100644
index 1939a21..0000000
--- a/board/samsung/smdk2410/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= smdk2410.o
-obj-y	+= lowlevel_init.o
diff --git a/board/samsung/smdk2410/lowlevel_init.S b/board/samsung/smdk2410/lowlevel_init.S
deleted file mode 100644
index c3f4187..0000000
--- a/board/samsung/smdk2410/lowlevel_init.S
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#include <config.h>
-
-/* some parameters for the board */
-
-/*
- *
- * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
- *
- * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
- *
- */
-
-#define BWSCON	0x48000000
-
-/* BWSCON */
-#define DW8			(0x0)
-#define DW16			(0x1)
-#define DW32			(0x2)
-#define WAIT			(0x1<<2)
-#define UBLB			(0x1<<3)
-
-#define B1_BWSCON		(DW32)
-#define B2_BWSCON		(DW16)
-#define B3_BWSCON		(DW16 + WAIT + UBLB)
-#define B4_BWSCON		(DW16)
-#define B5_BWSCON		(DW16)
-#define B6_BWSCON		(DW32)
-#define B7_BWSCON		(DW32)
-
-/* BANK0CON */
-#define B0_Tacs			0x0	/*  0clk */
-#define B0_Tcos			0x0	/*  0clk */
-#define B0_Tacc			0x7	/* 14clk */
-#define B0_Tcoh			0x0	/*  0clk */
-#define B0_Tah			0x0	/*  0clk */
-#define B0_Tacp			0x0
-#define B0_PMC			0x0	/* normal */
-
-/* BANK1CON */
-#define B1_Tacs			0x0	/*  0clk */
-#define B1_Tcos			0x0	/*  0clk */
-#define B1_Tacc			0x7	/* 14clk */
-#define B1_Tcoh			0x0	/*  0clk */
-#define B1_Tah			0x0	/*  0clk */
-#define B1_Tacp			0x0
-#define B1_PMC			0x0
-
-#define B2_Tacs			0x0
-#define B2_Tcos			0x0
-#define B2_Tacc			0x7
-#define B2_Tcoh			0x0
-#define B2_Tah			0x0
-#define B2_Tacp			0x0
-#define B2_PMC			0x0
-
-#define B3_Tacs			0x0	/*  0clk */
-#define B3_Tcos			0x3	/*  4clk */
-#define B3_Tacc			0x7	/* 14clk */
-#define B3_Tcoh			0x1	/*  1clk */
-#define B3_Tah			0x0	/*  0clk */
-#define B3_Tacp			0x3     /*  6clk */
-#define B3_PMC			0x0	/* normal */
-
-#define B4_Tacs			0x0	/*  0clk */
-#define B4_Tcos			0x0	/*  0clk */
-#define B4_Tacc			0x7	/* 14clk */
-#define B4_Tcoh			0x0	/*  0clk */
-#define B4_Tah			0x0	/*  0clk */
-#define B4_Tacp			0x0
-#define B4_PMC			0x0	/* normal */
-
-#define B5_Tacs			0x0	/*  0clk */
-#define B5_Tcos			0x0	/*  0clk */
-#define B5_Tacc			0x7	/* 14clk */
-#define B5_Tcoh			0x0	/*  0clk */
-#define B5_Tah			0x0	/*  0clk */
-#define B5_Tacp			0x0
-#define B5_PMC			0x0	/* normal */
-
-#define B6_MT			0x3	/* SDRAM */
-#define B6_Trcd			0x1
-#define B6_SCAN			0x1	/* 9bit */
-
-#define B7_MT			0x3	/* SDRAM */
-#define B7_Trcd			0x1	/* 3clk */
-#define B7_SCAN			0x1	/* 9bit */
-
-/* REFRESH parameter */
-#define REFEN			0x1	/* Refresh enable */
-#define TREFMD			0x0	/* CBR(CAS before RAS)/Auto refresh */
-#define Trp			0x0	/* 2clk */
-#define Trc			0x3	/* 7clk */
-#define Tchr			0x2	/* 3clk */
-#define REFCNT			1113	/* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-/**************************************/
-
-.globl lowlevel_init
-lowlevel_init:
-	/* memory control configuration */
-	/* make r0 relative the current location so that it */
-	/* reads SMRDATA out of FLASH rather than memory ! */
-	ldr     r0, =SMRDATA
-	ldr	r1, =CONFIG_SYS_TEXT_BASE
-	sub	r0, r0, r1
-	ldr	r1, =BWSCON	/* Bus Width Status Controller */
-	add     r2, r0, #13*4
-0:
-	ldr     r3, [r0], #4
-	str     r3, [r1], #4
-	cmp     r2, r0
-	bne     0b
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-/* the literal pools origin */
-
-SMRDATA:
-    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-    .word 0x32
-    .word 0x30
-    .word 0x30
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
deleted file mode 100644
index 6e678c7..0000000
--- a/board/samsung/smdk2410/smdk2410.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002, 2010
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if (FCLK_SPEED == 0)		/* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV	0xC3
-#define M_PDIV	0x4
-#define M_SDIV	0x1
-#elif (FCLK_SPEED == 1)		/* Fout = 202.8MHz */
-#define M_MDIV	0xA1
-#define M_PDIV	0x3
-#define M_SDIV	0x1
-#endif
-
-#define USB_CLOCK 1
-
-#if (USB_CLOCK == 0)
-#define U_M_MDIV	0xA1
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x1
-#elif (USB_CLOCK == 1)
-#define U_M_MDIV	0x48
-#define U_M_PDIV	0x3
-#define U_M_SDIV	0x2
-#endif
-
-static inline void pll_delay(unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-	  "subs %0, %1, #1\n"
-	  "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_early_init_f(void)
-{
-	struct s3c24x0_clock_power * const clk_power =
-					s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
-	/* to reduce PLL lock time, adjust the LOCKTIME register */
-	writel(0xFFFFFF, &clk_power->locktime);
-
-	/* configure MPLL */
-	writel((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV,
-	       &clk_power->mpllcon);
-
-	/* some delay between MPLL and UPLL */
-	pll_delay(4000);
-
-	/* configure UPLL */
-	writel((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV,
-	       &clk_power->upllcon);
-
-	/* some delay between MPLL and UPLL */
-	pll_delay(8000);
-
-	/* set up the I/O ports */
-	writel(0x007FFFFF, &gpio->gpacon);
-	writel(0x00044555, &gpio->gpbcon);
-	writel(0x000007FF, &gpio->gpbup);
-	writel(0xAAAAAAAA, &gpio->gpccon);
-	writel(0x0000FFFF, &gpio->gpcup);
-	writel(0xAAAAAAAA, &gpio->gpdcon);
-	writel(0x0000FFFF, &gpio->gpdup);
-	writel(0xAAAAAAAA, &gpio->gpecon);
-	writel(0x0000FFFF, &gpio->gpeup);
-	writel(0x000055AA, &gpio->gpfcon);
-	writel(0x000000FF, &gpio->gpfup);
-	writel(0xFF95FFBA, &gpio->gpgcon);
-	writel(0x0000FFFF, &gpio->gpgup);
-	writel(0x002AFAAA, &gpio->gphcon);
-	writel(0x000007FF, &gpio->gphup);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* arch number of SMDK2410-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x30000100;
-
-	icache_enable();
-	dcache_enable();
-
-	return 0;
-}
-
-int dram_init(void)
-{
-	/* dram_init must store complete ramsize in gd->ram_size */
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_CS8900
-	rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
-	return rc;
-}
-#endif
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI AMD AM29LV800BB flash.
- */
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
-	info->portwidth = FLASH_CFI_16BIT;
-	info->chipwidth = FLASH_CFI_BY16;
-	info->interface = FLASH_CFI_X16;
-	return 1;
-}
diff --git a/configs/smdk2410_defconfig b/configs/smdk2410_defconfig
deleted file mode 100644
index 1eba4f9..0000000
--- a/configs/smdk2410_defconfig
+++ /dev/null
@@ -1,18 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_SMDK2410=y
-CONFIG_BOOTDELAY=5
-# CONFIG_SYS_STDIO_DEREGISTER is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="SMDK2410 # "
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_UBI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
deleted file mode 100644
index 1578310..0000000
--- a/include/configs/smdk2410.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Configuation settings for the SAMSUNG SMDK2410 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_S3C24X0		/* This is a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410		/* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410		/* on a SAMSUNG SMDK2410 Board */
-
-#define CONFIG_SYS_TEXT_BASE	0x0
-
-#define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
-
-/* input clock of PLL (the SMDK2410 has 12MHz input clock) */
-#define CONFIG_SYS_CLK_FREQ	12000000
-
-#define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Hardware drivers
- */
-#define CONFIG_CS8900		/* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE	0x19000300
-#define CONFIG_CS8900_BUS16	/* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on SMDK2410 */
-
-/************************************************************
- * USB support (currently only works with D-cache off)
- ************************************************************/
-#define CONFIG_USB_OHCI
-#define CONFIG_USB_OHCI_S3C24XX
-#define CONFIG_DOS_PARTITION
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0
-
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_REGINFO
-
-#define CONFIG_CMDLINE_EDITING
-
-/* autoboot */
-#define CONFIG_BOOT_RETRY_TIME	-1
-#define CONFIG_RESET_TO_RETRY
-
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.0.0.110
-#define CONFIG_SERVERIP		10.0.0.1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_CBSIZE	256
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
-				sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS	16
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START	0x30000000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x33F00000	/* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR		0x30800000
-
-/* support additional compression methods */
-#define CONFIG_BZIP2
-#define CONFIG_LZO
-#define CONFIG_LZMA
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1          /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #0 */
-
-#define CONFIG_SYS_FLASH_BASE	PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-#define CONFIG_FLASH_SHOW_PROGRESS	45
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_SECT	(19)
-
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x070000)
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE			0x10000
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- * BZIP2 / LZO / LZMA need a lot of RAM
- */
-#define CONFIG_SYS_MALLOC_LEN	(4 * 1024 * 1024)
-
-#define CONFIG_SYS_MONITOR_LEN	(448 * 1024)
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-
-/*
- * NAND configuration
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_S3C2410_NAND_HWECC
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x4E000000
-#endif
-
-/*
- * File system
- */
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_YAFFS2
-#define CONFIG_RBTREE
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
-				GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#endif /* __CONFIG_H */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index fb34274..5c3da7d 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -164,7 +164,6 @@ CONFIG_ARCH_RMOBILE_EXTRAM_BOOT
 CONFIG_ARCH_RPC
 CONFIG_ARCH_S3C2440
 CONFIG_ARCH_SHARK
-CONFIG_ARCH_SMDK2410
 CONFIG_ARCH_TEGRA
 CONFIG_ARCH_USE_BUILTIN_BSWAP
 CONFIG_ARCH_VERSATILE_PB
@@ -4031,7 +4030,6 @@ CONFIG_SMC_B3TIM_VAL
 CONFIG_SMC_GCTL_VAL
 CONFIG_SMC_USE_32_BIT
 CONFIG_SMC_USE_IOFUNCS
-CONFIG_SMDK2410
 CONFIG_SMDK5420
 CONFIG_SMDKC100
 CONFIG_SMDKV310