stm32: clk: Add 200MHz clock configuration for stm32f746 discovery board

This patch adds 200MHz clock configuration for stm32f746 discovery board.
This patch is based on STM32F4 and emcraft's[1].

[1]:  https://github.com/EmcraftSystems/u-boot

Signed-off-by: Toshifumi NISHINAGA <tnishinaga.dev@gmail.com>

1 files changed, 46 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
index 68bdab0..de55ae5 100644
--- a/arch/arm/include/asm/arch-stm32f7/stm32.h
+++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -64,6 +64,52 @@ enum clock {
 };
 #define STM32_BUS_MASK          0xFFFF0000
 
+struct stm32_rcc_regs {
+	u32 cr;		/* RCC clock control */
+	u32 pllcfgr;	/* RCC PLL configuration */
+	u32 cfgr;	/* RCC clock configuration */
+	u32 cir;	/* RCC clock interrupt */
+	u32 ahb1rstr;	/* RCC AHB1 peripheral reset */
+	u32 ahb2rstr;	/* RCC AHB2 peripheral reset */
+	u32 ahb3rstr;	/* RCC AHB3 peripheral reset */
+	u32 rsv0;
+	u32 apb1rstr;	/* RCC APB1 peripheral reset */
+	u32 apb2rstr;	/* RCC APB2 peripheral reset */
+	u32 rsv1[2];
+	u32 ahb1enr;	/* RCC AHB1 peripheral clock enable */
+	u32 ahb2enr;	/* RCC AHB2 peripheral clock enable */
+	u32 ahb3enr;	/* RCC AHB3 peripheral clock enable */
+	u32 rsv2;
+	u32 apb1enr;	/* RCC APB1 peripheral clock enable */
+	u32 apb2enr;	/* RCC APB2 peripheral clock enable */
+	u32 rsv3[2];
+	u32 ahb1lpenr;	/* RCC AHB1 periph clk enable in low pwr mode */
+	u32 ahb2lpenr;	/* RCC AHB2 periph clk enable in low pwr mode */
+	u32 ahb3lpenr;	/* RCC AHB3 periph clk enable in low pwr mode */
+	u32 rsv4;
+	u32 apb1lpenr;	/* RCC APB1 periph clk enable in low pwr mode */
+	u32 apb2lpenr;	/* RCC APB2 periph clk enable in low pwr mode */
+	u32 rsv5[2];
+	u32 bdcr;	/* RCC Backup domain control */
+	u32 csr;	/* RCC clock control & status */
+	u32 rsv6[2];
+	u32 sscgr;	/* RCC spread spectrum clock generation */
+	u32 plli2scfgr;	/* RCC PLLI2S configuration */
+	u32 pllsaicfgr;
+	u32 dckcfgr;
+};
+#define STM32_RCC		((struct stm32_rcc_regs *)RCC_BASE)
+
+struct stm32_pwr_regs {
+	u32 cr1;   /* power control register 1 */
+	u32 csr1;  /* power control/status register 2 */
+	u32 cr2;   /* power control register 2 */
+	u32 csr2;  /* power control/status register 2 */
+};
+#define STM32_PWR		((struct stm32_pwr_regs *)PWR_BASE)
+
 int configure_clocks(void);
+unsigned long clock_get(enum clock clck);
+void stm32_flash_latency_cfg(int latency);
 
 #endif /* _ASM_ARCH_HARDWARE_H */