ARM: uniphier: move SBC and Support Card init code to U-Boot proper

Initialize SBC and Support Card in U-Boot proper instead of SPL.

We may run different firmware (ex. ARM Trusted Firmware) before
U-Boot, and basic SoC initialization may be done there.  In that
case, SPL may not be used.

The motivation for preparing SBC and Support Card in SPL was to use
LED for early debugging, but this is not mandatory to boot SoCs.
With this commit, LED will be unavailable in SPL, but we can use a
debug serial instead.  So, this change will not be a big deal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

3 files changed, 19 insertions, 27 deletions

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 7f1abd0..ab2c6dc 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -7,7 +7,6 @@ ifdef CONFIG_SPL_BUILD
 obj-y += spl_board_init.o
 obj-y += memconf.o
 obj-y += bcu/
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/
 
 else
 
@@ -17,6 +16,9 @@ obj-y += board_init.o
 obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
 obj-y += reset.o
 
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/ micro-support-card.o
+obj-y += pinctrl-glue.o
+
 endif
 
 obj-y += boards.o
@@ -24,9 +26,7 @@ obj-y += soc_info.o
 obj-y += boot-mode/
 obj-y += clk/
 obj-y += dram/
-obj-y += pinctrl-glue.o
 
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
 obj-$(CONFIG_DEBUG_UART_UNIPHIER) += debug-uart/
 
 obj-$(CONFIG_CPU_V7) += arm32/
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index d698dd5..93330b0 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -81,6 +81,7 @@ static void uniphier_ld20_misc_init(void)
 struct uniphier_initdata {
 	enum uniphier_soc_id soc_id;
 	bool nand_2cs;
+	void (*sbc_init)(void);
 	void (*pll_init)(void);
 	void (*clk_init)(void);
 	void (*misc_init)(void);
@@ -91,6 +92,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_SLD3,
 		.nand_2cs = true,
+		.sbc_init = uniphier_sbc_init_admulti,
 		.pll_init = uniphier_sld3_pll_init,
 		.clk_init = uniphier_ld4_clk_init,
 	},
@@ -99,6 +101,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD4,
 		.nand_2cs = true,
+		.sbc_init = uniphier_ld4_sbc_init,
 		.pll_init = uniphier_ld4_pll_init,
 		.clk_init = uniphier_ld4_clk_init,
 	},
@@ -107,6 +110,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PRO4,
 		.nand_2cs = false,
+		.sbc_init = uniphier_sbc_init_savepin,
 		.pll_init = uniphier_pro4_pll_init,
 		.clk_init = uniphier_pro4_clk_init,
 	},
@@ -115,6 +119,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_SLD8,
 		.nand_2cs = true,
+		.sbc_init = uniphier_ld4_sbc_init,
 		.pll_init = uniphier_ld4_pll_init,
 		.clk_init = uniphier_ld4_clk_init,
 	},
@@ -123,6 +128,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PRO5,
 		.nand_2cs = true,
+		.sbc_init = uniphier_sbc_init_savepin,
 		.clk_init = uniphier_pro5_clk_init,
 	},
 #endif
@@ -130,6 +136,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PXS2,
 		.nand_2cs = true,
+		.sbc_init = uniphier_pxs2_sbc_init,
 		.clk_init = uniphier_pxs2_clk_init,
 	},
 #endif
@@ -137,6 +144,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD6B,
 		.nand_2cs = true,
+		.sbc_init = uniphier_pxs2_sbc_init,
 		.clk_init = uniphier_pxs2_clk_init,
 	},
 #endif
@@ -144,6 +152,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD11,
 		.nand_2cs = false,
+		.sbc_init = uniphier_ld11_sbc_init,
 		.pll_init = uniphier_ld11_pll_init,
 		.clk_init = uniphier_ld11_clk_init,
 		.misc_init = uniphier_ld11_misc_init,
@@ -153,6 +162,7 @@ struct uniphier_initdata uniphier_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD20,
 		.nand_2cs = false,
+		.sbc_init = uniphier_ld11_sbc_init,
 		.pll_init = uniphier_ld20_pll_init,
 		.misc_init = uniphier_ld20_misc_init,
 	},
@@ -187,6 +197,12 @@ int board_init(void)
 		return -EINVAL;
 	}
 
+	initdata->sbc_init();
+
+	support_card_init();
+
+	led_puts("U0");
+
 	if (IS_ENABLED(CONFIG_NAND_DENALI)) {
 		ret = uniphier_pin_init(initdata->nand_2cs ?
 					"nand2cs_grp" : "nand_grp");
diff --git a/arch/arm/mach-uniphier/spl_board_init.c b/arch/arm/mach-uniphier/spl_board_init.c
index d1e1ea7..f4e1cb9 100644
--- a/arch/arm/mach-uniphier/spl_board_init.c
+++ b/arch/arm/mach-uniphier/spl_board_init.c
@@ -17,7 +17,6 @@ struct uniphier_spl_initdata {
 	enum uniphier_soc_id soc_id;
 	void (*bcu_init)(const struct uniphier_board_data *bd);
 	void (*early_clk_init)(void);
-	void (*sbc_init)(void);
 	int (*dpll_init)(const struct uniphier_board_data *bd);
 	int (*memconf_init)(const struct uniphier_board_data *bd);
 	void (*dram_clk_init)(void);
@@ -30,7 +29,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 		.soc_id = SOC_UNIPHIER_SLD3,
 		.bcu_init = uniphier_sld3_bcu_init,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_sbc_init_admulti,
 		.dpll_init = uniphier_sld3_dpll_init,
 		.memconf_init = uniphier_memconf_3ch_no_disbit_init,
 		.dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -42,7 +40,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 		.soc_id = SOC_UNIPHIER_LD4,
 		.bcu_init = uniphier_ld4_bcu_init,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_ld4_sbc_init,
 		.dpll_init = uniphier_ld4_dpll_init,
 		.memconf_init = uniphier_memconf_2ch_init,
 		.dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -53,7 +50,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PRO4,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_sbc_init_savepin,
 		.dpll_init = uniphier_pro4_dpll_init,
 		.memconf_init = uniphier_memconf_2ch_init,
 		.dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -65,7 +61,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 		.soc_id = SOC_UNIPHIER_SLD8,
 		.bcu_init = uniphier_ld4_bcu_init,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_ld4_sbc_init,
 		.dpll_init = uniphier_sld8_dpll_init,
 		.memconf_init = uniphier_memconf_2ch_init,
 		.dram_clk_init = uniphier_sld3_dram_clk_init,
@@ -76,7 +71,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PRO5,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_sbc_init_savepin,
 		.dpll_init = uniphier_pro5_dpll_init,
 		.memconf_init = uniphier_memconf_2ch_init,
 		.dram_clk_init = uniphier_pro5_dram_clk_init,
@@ -87,7 +81,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_PXS2,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_pxs2_sbc_init,
 		.dpll_init = uniphier_pxs2_dpll_init,
 		.memconf_init = uniphier_memconf_3ch_init,
 		.dram_clk_init = uniphier_pxs2_dram_clk_init,
@@ -98,7 +91,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD6B,
 		.early_clk_init = uniphier_sld3_early_clk_init,
-		.sbc_init = uniphier_pxs2_sbc_init,
 		.dpll_init = uniphier_pxs2_dpll_init,
 		.memconf_init = uniphier_memconf_3ch_init,
 		.dram_clk_init = uniphier_pxs2_dram_clk_init,
@@ -109,7 +101,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD11,
 		.early_clk_init = uniphier_ld11_early_clk_init,
-		.sbc_init = uniphier_ld11_sbc_init,
 		.dpll_init = uniphier_ld11_dpll_init,
 		.memconf_init = uniphier_memconf_2ch_init,
 		.dram_clk_init = uniphier_ld11_dram_clk_init,
@@ -120,7 +111,6 @@ static const struct uniphier_spl_initdata uniphier_spl_initdata[] = {
 	{
 		.soc_id = SOC_UNIPHIER_LD20,
 		.early_clk_init = uniphier_ld11_early_clk_init,
-		.sbc_init = uniphier_ld11_sbc_init,
 		.dpll_init = uniphier_ld20_dpll_init,
 		.memconf_init = uniphier_memconf_3ch_init,
 		.dram_clk_init = uniphier_ld20_dram_clk_init,
@@ -165,45 +155,31 @@ void spl_board_init(void)
 	if (initdata->bcu_init)
 		initdata->bcu_init(bd);
 
-	initdata->sbc_init();
 
 	initdata->early_clk_init();
 
-	support_card_init();
-
-	led_puts("L0");
 
 #ifdef CONFIG_SPL_SERIAL_SUPPORT
 	preloader_console_init();
 #endif
 
-	led_puts("L1");
-
 	ret = initdata->dpll_init(bd);
 	if (ret) {
 		pr_err("failed to init DPLL\n");
 		hang();
 	}
 
-	led_puts("L2");
-
 	ret = initdata->memconf_init(bd);
 	if (ret) {
 		pr_err("failed to init MEMCONF\n");
 		hang();
 	}
 
-	led_puts("L3");
-
 	initdata->dram_clk_init();
 
-	led_puts("L4");
-
 	ret = initdata->umc_init(bd);
 	if (ret) {
 		pr_err("failed to init DRAM\n");
 		hang();
 	}
-
-	led_puts("L5");
 }