powerpc, 5xx: remove support for 5xx

There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 156 deletions

diff --git a/arch/powerpc/cpu/mpc5xx/cpu.c b/arch/powerpc/cpu/mpc5xx/cpu.c
deleted file mode 100644
index cfcf633..0000000
--- a/arch/powerpc/cpu/mpc5xx/cpu.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * File:		cpu.c
- *
- * Discription:		Some cpu specific function for watchdog,
- *                      cpu version test, clock setting ...
- *
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined(CONFIG_MPC555))
-#  define	ID_STR	"MPC555/556"
-
-/*
- * Check version of cpu with Processor Version Register (PVR)
- */
-static int check_cpu_version (long clock, uint pvr, uint immr)
-{
-    char buf[32];
-	/* The highest 16 bits should be 0x0002 for a MPC555/556 */
-	if ((pvr >> 16) == 0x0002) {
-		printf (" " ID_STR " Version %x", (pvr >> 16));
-		printf (" at %s MHz:", strmhz (buf, clock));
-	} else {
-		printf ("Not supported cpu version");
-		return -1;
-	}
-	return 0;
-}
-#endif /* CONFIG_MPC555 */
-
-
-/*
- * Check version of mpc5xx
- */
-int checkcpu (void)
-{
-	ulong clock = gd->cpu_clk;
-	uint immr = get_immr (0);	/* Return full IMMR contents */
-	uint pvr = get_pvr ();		/* Retrieve PVR register */
-
-	puts ("CPU:   ");
-
-	return check_cpu_version (clock, pvr, immr);
-}
-
-/*
- * Called by macro WATCHDOG_RESET
- */
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-	int re_enable = disable_interrupts ();
-
-	reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-	if (re_enable)
-		enable_interrupts ();
-}
-
-/*
- * Will clear software reset
- */
-void reset_5xx_watchdog (volatile immap_t * immr)
-{
-	/* Use the MPC5xx Internal Watchdog */
-	immr->im_siu_conf.sc_swsr = 0x556c;	/* Prevent SW time-out */
-	immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-
-#endif /* CONFIG_WATCHDOG */
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-	volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
-	ulong oscclk, factor;
-
-	if (immr->im_clkrst.car_sccr & SCCR_TBS) {
-		return (gd->cpu_clk / 16);
-	}
-
-	factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
-
-	oscclk = gd->cpu_clk / factor;
-
-	if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
-		return (oscclk / 4);
-	}
-	return (oscclk / 16);
-}
-
-void dcache_enable (void)
-{
-	return;
-}
-
-void dcache_disable (void)
-{
-	return;
-}
-
-int dcache_status (void)
-{
-	return 0;	/* always off */
-}
-
-/*
- * Reset board
- */
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-#if defined(CONFIG_PATI)
-	volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
-	*addr = 1;
-#else
-	ulong addr;
-
-	/* Interrupts off, enable reset */
-	__asm__ volatile	("  mtspr	81, %r0		\n\t"
-				 "  mfmsr	%r3		\n\t"
-				 "  rlwinm	%r31,%r3,0,25,23\n\t"
-				 "  mtmsr	%r31		\n\t");
-	/*
-	 * Trying to execute the next instruction at a non-existing address
-	 * should cause a machine check, resulting in reset
-	 */
-#ifdef CONFIG_SYS_RESET_ADDRESS
-	addr = CONFIG_SYS_RESET_ADDRESS;
-#else
-	/*
-	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE         * - sizeof (ulong) is usually a valid address. Better pick an address
-	 * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
-	 * "(ulong)-1" used to be a good choice for many systems...
-	 */
-	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
-	((void (*) (void)) addr) ();
-#endif  /* #if defined(CONFIG_PATI) */
-	return 1;
-}