diff options
author | Wolfgang Denk <wd@denx.de> | 2011-10-04 20:08:13 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-10-04 20:08:13 (GMT) |
commit | 1fed668b3fb9c35932f58af00ff5539239fa4e1d (patch) | |
tree | eaaaead8ca19924af1823caae040f504be9b6d98 /arch/powerpc/cpu/mpc83xx | |
parent | c52575350fd6e794717f6bee4f81dbb8038fe22e (diff) | |
parent | 6d7b061af153bc5beb633c3bd15348284716a067 (diff) | |
download | u-boot-fsl-qoriq-1fed668b3fb9c35932f58af00ff5539239fa4e1d.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
powerpc/p3060: Add SoC related support for P3060 platform
powerpc/85xx: Add support for setting up RAID engine liodns on P5020
powerpc/85xx: Refactor some defines out of corenet_ds.h
fm-eth: Add ability for board code to disable a port
powerpc/mpc8548: Add workaround for erratum NMG_LBC103
powerpc/mpc8548: Add workaround for erratum NMG_DDR120
powerpc/mpc85xxcds: Fix PCI speed
powerpc/mpc8548cds: Fix booting message
powerpc/p4080: Add support for secure boot flow
powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH
powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
powerpc/p2041rdb: remove watch dog related codes
powerpc/p2041rdb: updated description of cpld command
powerpc/p2041rdb: add more ddr frequencies support
powerpc/p2041rdb: set sysclk according to status of physical switch SW1
powerpc/p2041rdb: update cpld reset command according to CPLD 2.0
powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
powerpc/mpc8xxx: Add DDR2 to unified DDR driver
powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
powerpc/85xx: Refactor P2041RDB to use common p_corenet files
powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
powerpc/85xx: Enable CMD_REGINFO on corenet boards
powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
powerpc/85xx: Fix USB protocol definitions for P1020RDB
powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
powerpc/mpc8xxx: Move DDR RCW overriding to common code
powerpc/mpc8xxx: Extend CWL table
powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
powerpc/85xx: Cleanup extern in corenet_ds board code
powerpc/p2041rdb: Add ethernet support on P2041RDB board
powerpc/85xx: Add networking support to P1023RDS
powerpc/hydra: Add ethernet support on P5020/P3041 DS boards
powerpc/85xx: Add FMan ethernet support to P4080DS
powerpc/85xx: Add support for FMan ethernet in Independent mode
powerpc/mpc8548cds: Cleanup mpc8548cds.c
powerpc/mp: add support for discontiguous cores
powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries
fdt: Add new fdt_create_phandle helper
fdt: Rename fdt_create_phandle to fdt_set_phandle
powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set
fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC)
fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010)
powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M
powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
nand: Freescale Integrated Flash Controller NAND support
powerpc/85xx: Add basic support for P1010RDB
powerpc/85xx: Add support for new P102x/P2020 RDB style boards
powerpc/85xx: relocate CCSR before creating the initial RAM area
powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0
powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
Diffstat (limited to 'arch/powerpc/cpu/mpc83xx')
-rw-r--r-- | arch/powerpc/cpu/mpc83xx/Makefile | 20 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc83xx/ecc.c | 18 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc83xx/law.c | 61 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc83xx/speed.c | 9 |
4 files changed, 102 insertions, 6 deletions
diff --git a/arch/powerpc/cpu/mpc83xx/Makefile b/arch/powerpc/cpu/mpc83xx/Makefile index 3979b6f..b353036 100644 --- a/arch/powerpc/cpu/mpc83xx/Makefile +++ b/arch/powerpc/cpu/mpc83xx/Makefile @@ -34,7 +34,6 @@ COBJS-y += cpu.o COBJS-y += cpu_init.o COBJS-y += speed.o COBJS-y += interrupts.o -COBJS-y += spd_sdram.o COBJS-y += ecc.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_FSL_SERDES) += serdes.o @@ -42,6 +41,13 @@ COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_PCIE) += pcie.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o +ifdef CONFIG_FSL_DDR2 +COBJS-$(CONFIG_MPC8349) += ddr-gen2.o +else +COBJS-y += spd_sdram.o +endif +COBJS-$(CONFIG_FSL_DDR2) += law.o + COBJS := $(COBJS-y) SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -52,6 +58,18 @@ all: $(obj).depend $(START) $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(obj)ddr-gen1.c: + @rm -f $(obj)ddr-gen1.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen1.c $(obj)ddr-gen1.c + +$(obj)ddr-gen2.c: + @rm -f $(obj)ddr-gen2.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen2.c $(obj)ddr-gen2.c + +$(obj)ddr-gen3.c: + @rm -f $(obj)ddr-gen3.c + ln -sf $(SRCTREE)/arch/powerpc/cpu/mpc85xx/ddr-gen3.c $(obj)ddr-gen3.c + ######################################################################### # defines $(obj).depend target diff --git a/arch/powerpc/cpu/mpc83xx/ecc.c b/arch/powerpc/cpu/mpc83xx/ecc.c index f8eab96..717365c 100644 --- a/arch/powerpc/cpu/mpc83xx/ecc.c +++ b/arch/powerpc/cpu/mpc83xx/ecc.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Copyright (C) 2007-2011 Freescale Semiconductor, Inc. * * Dave Liu <daveliu@freescale.com> * based on the contribution of Marian Balakowicz <m8@semihalf.com> @@ -20,8 +20,12 @@ #if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) void ecc_print_status(void) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ddr83xx_t *ddr = &immap->ddr; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_DDR2 + ccsr_ddr_t *ddr = &immap->ddr; +#else + ddr83xx_t *ddr = &immap->ddr; +#endif printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF"); @@ -100,8 +104,12 @@ void ecc_print_status(void) int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile ddr83xx_t *ddr = &immap->ddr; + immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; +#ifdef CONFIG_FSL_DDR2 + ccsr_ddr_t *ddr = &immap->ddr; +#else + ddr83xx_t *ddr = &immap->ddr; +#endif volatile u32 val; u64 *addr; u32 count; diff --git a/arch/powerpc/cpu/mpc83xx/law.c b/arch/powerpc/cpu/mpc83xx/law.c new file mode 100644 index 0000000..66c88b6 --- /dev/null +++ b/arch/powerpc/cpu/mpc83xx/law.c @@ -0,0 +1,61 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 as published by the Free Software Foundation. + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id) +{ + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + law83xx_t *ecm = &immap->sysconf.ddrlaw[0]; + u64 start_align, law_sz; + int law_sz_enc; + + if (start == 0) + start_align = 1ull << (LAW_SIZE_2G + 1); + else + start_align = 1ull << (ffs64(start) - 1); + law_sz = min(start_align, sz); + law_sz_enc = __ilog2_u64(law_sz) - 1; + + /* + * Set up LAWBAR for all of DDR. + */ + ecm->bar = start & 0xfffff000; + ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc)); + debug("DDR:bar=0x%08x\n", ecm->bar); + debug("DDR:ar=0x%08x\n", ecm->ar); + + /* recalculate size based on what was actually covered by the law */ + law_sz = 1ull << __ilog2_u64(law_sz); + + /* do we still have anything to map */ + sz = sz - law_sz; + if (sz) { + start += law_sz; + + start_align = 1ull << (ffs64(start) - 1); + law_sz = min(start_align, sz); + law_sz_enc = __ilog2_u64(law_sz) - 1; + ecm = &immap->sysconf.ddrlaw[1]; + ecm->bar = start & 0xfffff000; + ecm->ar = (LAWAR_EN | (id << 20) | (LAWAR_SIZE & law_sz_enc)); + debug("DDR:bar=0x%08x\n", ecm->bar); + debug("DDR:ar=0x%08x\n", ecm->ar); + } else { + return 0; + } + + /* do we still have anything to map */ + sz = sz - law_sz; + if (sz) + return 1; + + return 0; +} diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index 4542ab1..f78099d 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -507,6 +507,15 @@ ulong get_bus_freq(ulong dummy) return gd->csb_clk; } +/******************************************** + * get_ddr_freq + * return ddr bus freq in Hz + *********************************************/ +ulong get_ddr_freq(ulong dummy) +{ + return gd->mem_clk; +} + int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; |