summaryrefslogtreecommitdiff
path: root/arch/powerpc/include/asm/fsl_dtsec.h
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-10-04 20:08:13 (GMT)
committerWolfgang Denk <wd@denx.de>2011-10-04 20:08:13 (GMT)
commit1fed668b3fb9c35932f58af00ff5539239fa4e1d (patch)
treeeaaaead8ca19924af1823caae040f504be9b6d98 /arch/powerpc/include/asm/fsl_dtsec.h
parentc52575350fd6e794717f6bee4f81dbb8038fe22e (diff)
parent6d7b061af153bc5beb633c3bd15348284716a067 (diff)
downloadu-boot-fsl-qoriq-1fed668b3fb9c35932f58af00ff5539239fa4e1d.tar.xz
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/p3060: Add SoC related support for P3060 platform powerpc/85xx: Add support for setting up RAID engine liodns on P5020 powerpc/85xx: Refactor some defines out of corenet_ds.h fm-eth: Add ability for board code to disable a port powerpc/mpc8548: Add workaround for erratum NMG_LBC103 powerpc/mpc8548: Add workaround for erratum NMG_DDR120 powerpc/mpc85xxcds: Fix PCI speed powerpc/mpc8548cds: Fix booting message powerpc/p4080: Add support for secure boot flow powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards powerpc/p2041rdb: remove watch dog related codes powerpc/p2041rdb: updated description of cpld command powerpc/p2041rdb: add more ddr frequencies support powerpc/p2041rdb: set sysclk according to status of physical switch SW1 powerpc/p2041rdb: update cpld reset command according to CPLD 2.0 powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver powerpc/mpc8xxx: Add DDR2 to unified DDR driver powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps() powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en powerpc/85xx: Refactor P2041RDB to use common p_corenet files powerpc/85xx: refactor common P-Series CoreNet files for FSL boards powerpc/85xx: Enable CMD_REGINFO on corenet boards powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries powerpc/85xx: Fix USB protocol definitions for P1020RDB powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM powerpc/mpc8xxx: Move DDR RCW overriding to common code powerpc/mpc8xxx: Extend CWL table powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536 powerpc/85xx: Cleanup extern in corenet_ds board code powerpc/p2041rdb: Add ethernet support on P2041RDB board powerpc/85xx: Add networking support to P1023RDS powerpc/hydra: Add ethernet support on P5020/P3041 DS boards powerpc/85xx: Add FMan ethernet support to P4080DS powerpc/85xx: Add support for FMan ethernet in Independent mode powerpc/mpc8548cds: Cleanup mpc8548cds.c powerpc/mp: add support for discontiguous cores powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries fdt: Add new fdt_create_phandle helper fdt: Rename fdt_create_phandle to fdt_set_phandle powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010) powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC) fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010) powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB nand: Freescale Integrated Flash Controller NAND support powerpc/85xx: Add basic support for P1010RDB powerpc/85xx: Add support for new P102x/P2020 RDB style boards powerpc/85xx: relocate CCSR before creating the initial RAM area powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0 powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014
Diffstat (limited to 'arch/powerpc/include/asm/fsl_dtsec.h')
-rw-r--r--arch/powerpc/include/asm/fsl_dtsec.h244
1 files changed, 244 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/fsl_dtsec.h b/arch/powerpc/include/asm/fsl_dtsec.h
new file mode 100644
index 0000000..d1d993c
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_dtsec.h
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __DTSEC_H__
+#define __DTSEC_H__
+
+#include <asm/types.h>
+
+struct dtsec {
+ u32 tsec_id; /* controller ID and version */
+ u32 tsec_id2; /* controller ID and configuration */
+ u32 ievent; /* interrupt event */
+ u32 imask; /* interrupt mask */
+ u32 res0;
+ u32 ecntrl; /* ethernet control and configuration */
+ u32 ptv; /* pause time value */
+ u32 tbipa; /* TBI PHY address */
+ u32 res1[8];
+ u32 tctrl; /* Transmit control register */
+ u32 res2[3];
+ u32 rctrl; /* Receive control register */
+ u32 res3[11];
+ u32 igaddr[8]; /* Individual group address */
+ u32 gaddr[8]; /* group address */
+ u32 res4[16];
+ u32 maccfg1; /* MAC configuration register 1 */
+ u32 maccfg2; /* MAC configuration register 2 */
+ u32 ipgifg; /* inter-packet/inter-frame gap */
+ u32 hafdup; /* half-duplex control */
+ u32 maxfrm; /* Maximum frame size */
+ u32 res5[3];
+ u32 miimcfg; /* MII management configuration */
+ u32 miimcom; /* MII management command */
+ u32 miimadd; /* MII management address */
+ u32 miimcon; /* MII management control */
+ u32 miimstat; /* MII management status */
+ u32 miimind; /* MII management indicator */
+ u32 res6;
+ u32 ifstat; /* Interface status */
+ u32 macstnaddr1; /* MAC station address 1 */
+ u32 macstnaddr2; /* MAC station address 2 */
+ u32 res7[46];
+ /* transmit and receive counter */
+ u32 tr64; /* Tx and Rx 64 bytes frame */
+ u32 tr127; /* Tx and Rx 65 to 127 bytes frame */
+ u32 tr255; /* Tx and Rx 128 to 255 bytes frame */
+ u32 tr511; /* Tx and Rx 256 to 511 bytes frame */
+ u32 tr1k; /* Tx and Rx 512 to 1023 bytes frame */
+ u32 trmax; /* Tx and Rx 1024 to 1518 bytes frame */
+ u32 trmgv; /* Tx and Rx 1519 to 1522 good VLAN frame */
+ /* receive counters */
+ u32 rbyt; /* Receive byte counter */
+ u32 rpkt; /* Receive packet counter */
+ u32 rfcs; /* Receive FCS error */
+ u32 rmca; /* Receive multicast packet */
+ u32 rbca; /* Receive broadcast packet */
+ u32 rxcf; /* Receive control frame */
+ u32 rxpf; /* Receive pause frame */
+ u32 rxuo; /* Receive unknown OP code */
+ u32 raln; /* Receive alignment error */
+ u32 rflr; /* Receive frame length error */
+ u32 rcde; /* Receive code error */
+ u32 rcse; /* Receive carrier sense error */
+ u32 rund; /* Receive undersize packet */
+ u32 rovr; /* Receive oversize packet */
+ u32 rfrg; /* Receive fragments counter */
+ u32 rjbr; /* Receive jabber counter */
+ u32 rdrp; /* Receive drop counter */
+ /* transmit counters */
+ u32 tbyt; /* Transmit byte counter */
+ u32 tpkt; /* Transmit packet */
+ u32 tmca; /* Transmit multicast packet */
+ u32 tbca; /* Transmit broadcast packet */
+ u32 txpf; /* Transmit pause control frame */
+ u32 tdfr; /* Transmit deferral packet */
+ u32 tedf; /* Transmit excessive deferral pkt */
+ u32 tscl; /* Transmit single collision pkt */
+ u32 tmcl; /* Transmit multiple collision pkt */
+ u32 tlcl; /* Transmit late collision pkt */
+ u32 txcl; /* Transmit excessive collision */
+ u32 tncl; /* Transmit total collision */
+ u32 res8;
+ u32 tdrp; /* Transmit drop frame */
+ u32 tjbr; /* Transmit jabber frame */
+ u32 tfcs; /* Transmit FCS error */
+ u32 txcf; /* Transmit control frame */
+ u32 tovr; /* Transmit oversize frame */
+ u32 tund; /* Transmit undersize frame */
+ u32 tfrg; /* Transmit fragments frame */
+ /* counter controls */
+ u32 car1; /* carry register 1 */
+ u32 car2; /* carry register 2 */
+ u32 cam1; /* carry register 1 mask */
+ u32 cam2; /* carry register 2 mask */
+ u32 res9[80];
+};
+
+
+/* TBI register addresses */
+#define TBI_CR 0x00
+#define TBI_SR 0x01
+#define TBI_ANA 0x04
+#define TBI_ANLPBPA 0x05
+#define TBI_ANEX 0x06
+#define TBI_TBICON 0x11
+
+/* TBI MDIO register bit fields*/
+#define TBICON_CLK_SELECT 0x0020
+#define TBIANA_ASYMMETRIC_PAUSE 0x0100
+#define TBIANA_SYMMETRIC_PAUSE 0x0080
+#define TBIANA_HALF_DUPLEX 0x0040
+#define TBIANA_FULL_DUPLEX 0x0020
+#define TBICR_PHY_RESET 0x8000
+#define TBICR_ANEG_ENABLE 0x1000
+#define TBICR_RESTART_ANEG 0x0200
+#define TBICR_FULL_DUPLEX 0x0100
+#define TBICR_SPEED1_SET 0x0040
+
+/* IEVENT - interrupt events register */
+#define IEVENT_BABR 0x80000000 /* Babbling receive error */
+#define IEVENT_RXC 0x40000000 /* pause control frame received */
+#define IEVENT_MSRO 0x04000000 /* MIB counter overflow */
+#define IEVENT_GTSC 0x02000000 /* Graceful transmit stop complete */
+#define IEVENT_BABT 0x01000000 /* Babbling transmit error */
+#define IEVENT_TXC 0x00800000 /* control frame transmitted */
+#define IEVENT_TXE 0x00400000 /* Transmit channel error */
+#define IEVENT_LC 0x00040000 /* Late collision occurred */
+#define IEVENT_CRL 0x00020000 /* Collision retry exceed limit */
+#define IEVENT_XFUN 0x00010000 /* Transmit FIFO underrun */
+#define IEVENT_ABRT 0x00008000 /* Transmit packet abort */
+#define IEVENT_MMRD 0x00000400 /* MII management read complete */
+#define IEVENT_MMWR 0x00000200 /* MII management write complete */
+#define IEVENT_GRSC 0x00000100 /* Graceful stop complete */
+#define IEVENT_TDPE 0x00000002 /* Internal data parity error on Tx */
+#define IEVENT_RDPE 0x00000001 /* Internal data parity error on Rx */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+/* IMASK - interrupt mask register */
+#define IMASK_BREN 0x80000000 /* Babbling receive enable */
+#define IMASK_RXCEN 0x40000000 /* receive control enable */
+#define IMASK_MSROEN 0x04000000 /* MIB counter overflow enable */
+#define IMASK_GTSCEN 0x02000000 /* Graceful Tx stop complete enable */
+#define IMASK_BTEN 0x01000000 /* Babbling transmit error enable */
+#define IMASK_TXCEN 0x00800000 /* control frame transmitted enable */
+#define IMASK_TXEEN 0x00400000 /* Transmit channel error enable */
+#define IMASK_LCEN 0x00040000 /* Late collision interrupt enable */
+#define IMASK_CRLEN 0x00020000 /* Collision retry exceed limit */
+#define IMASK_XFUNEN 0x00010000 /* Transmit FIFO underrun enable */
+#define IMASK_ABRTEN 0x00008000 /* Transmit packet abort enable */
+#define IMASK_MMRDEN 0x00000400 /* MII management read complete enable */
+#define IMASK_MMWREN 0x00000200 /* MII management write complete enable */
+#define IMASK_GRSCEN 0x00000100 /* Graceful stop complete interrupt enable */
+#define IMASK_TDPEEN 0x00000002 /* Internal data parity error on Tx enable */
+#define IMASK_RDPEEN 0x00000001 /* Internal data parity error on Rx enable */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* ECNTRL - ethernet control register */
+#define ECNTRL_CFG_RO 0x80000000 /* GMIIM, RPM, R100M, SGMIIM bits are RO */
+#define ECNTRL_CLRCNT 0x00004000 /* clear all statistics */
+#define ECNTRL_AUTOZ 0x00002000 /* auto zero MIB counter */
+#define ECNTRL_STEN 0x00001000 /* enable internal counters to update */
+#define ECNTRL_GMIIM 0x00000040 /* 1- GMII or RGMII interface mode */
+#define ECNTRL_TBIM 0x00000020 /* 1- Ten-bit interface mode */
+#define ECNTRL_RPM 0x00000010 /* 1- RGMII reduced-pin mode */
+#define ECNTRL_R100M 0x00000008 /* 1- RGMII 100 Mbps, SGMII 100 Mbps
+ 0- RGMII 10 Mbps, SGMII 10 Mbps */
+#define ECNTRL_SGMIIM 0x00000002 /* 1- SGMII interface mode */
+#define ECNTRL_TBIM 0x00000020 /* 1- TBI Interface mode (for SGMII) */
+
+#define ECNTRL_DEFAULT (ECNTRL_TBIM | ECNTRL_R100M | ECNTRL_SGMIIM)
+
+/* TCTRL - Transmit control register */
+#define TCTRL_THDF 0x00000800 /* Transmit half-duplex flow control */
+#define TCTRL_TTSE 0x00000040 /* Transmit time-stamp enable */
+#define TCTRL_GTS 0x00000020 /* Graceful transmit stop */
+#define TCTRL_RFC_PAUSE 0x00000010 /* Receive flow control pause frame */
+
+/* RCTRL - Receive control register */
+#define RCTRL_PAL_MASK 0x001f0000 /* packet alignment padding length */
+#define RCTRL_PAL_SHIFT 16
+#define RCTRL_CFA 0x00008000 /* control frame accept enable */
+#define RCTRL_GHTX 0x00000800 /* group address hash table extend */
+#define RCTRL_RTSE 0x00000040 /* receive 1588 time-stamp enable */
+#define RCTRL_GRS 0x00000020 /* graceful receive stop */
+#define RCTRL_BC_REJ 0x00000010 /* broadcast frame reject */
+#define RCTRL_BC_MPROM 0x00000008 /* all multicast/broadcast frames received */
+#define RCTRL_RSF 0x00000004 /* receive short frame(17~63 bytes) enable */
+#define RCTRL_EMEN 0x00000002 /* Exact match MAC address enable */
+#define RCTRL_UPROM 0x00000001 /* all unicast frame received */
+
+/* MACCFG1 - MAC configuration 1 register */
+#define MACCFG1_SOFT_RST 0x80000000 /* place the MAC in reset */
+#define MACCFG1_RST_RXMAC 0x00080000 /* reset receive MAC control block */
+#define MACCFG1_RST_TXMAC 0x00040000 /* reet transmit MAC control block */
+#define MACCFG1_RST_RXFUN 0x00020000 /* reset receive function block */
+#define MACCFG1_RST_TXFUN 0x00010000 /* reset transmit function block */
+#define MACCFG1_LOOPBACK 0x00000100 /* MAC loopback */
+#define MACCFG1_RX_FLOW 0x00000020 /* Receive flow */
+#define MACCFG1_TX_FLOW 0x00000010 /* Transmit flow */
+#define MACCFG1_SYNC_RXEN 0x00000008 /* Frame reception enabled */
+#define MACCFG1_RX_EN 0x00000004 /* Rx enable */
+#define MACCFG1_SYNC_TXEN 0x00000002 /* Frame transmission is enabled */
+#define MACCFG1_TX_EN 0x00000001 /* Tx enable */
+#define MACCFG1_RXTX_EN (MACCFG1_RX_EN | MACCFG1_TX_EN)
+
+/* MACCFG2 - MAC configuration 2 register */
+#define MACCFG2_PRE_LEN_MASK 0x0000f000 /* preamble length */
+#define MACCFG2_PRE_LEN(x) ((x << 12) & MACCFG2_PRE_LEN_MASK)
+#define MACCFG2_IF_MODE_MASK 0x00000300
+#define MACCFG2_IF_MODE_NIBBLE 0x00000100 /* MII, 10/100 Mbps MII/RMII */
+#define MACCFG2_IF_MODE_BYTE 0x00000200 /* GMII/TBI, 1000 GMII/TBI */
+#define MACCFG2_PRE_RX_EN 0x00000080 /* receive preamble enable */
+#define MACCFG2_PRE_TX_EN 0x00000040 /* tx preable enable */
+#define MACCFG2_HUGE_FRAME 0x00000020 /* >= max frame len enable */
+#define MACCFG2_LEN_CHECK 0x00000010 /* MAC check frame's length Rx */
+#define MACCFG2_MAG_EN 0x00000008 /* magic packet enable */
+#define MACCFG2_PAD_CRC 0x00000004 /* pad and append CRC */
+#define MACCFG2_CRC_EN 0x00000002 /* MAC appends a CRC on all frames */
+#define MACCFG2_FULL_DUPLEX 0x00000001 /* Full deplex mode */
+
+struct fsl_enet_mac;
+
+void init_dtsec(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif