x86: quark: Add PCIe/USB static register programming after memory init

This adds static register programming for PCIe and USB after memory
init as required by Quark firmware writer guide. Although not doing
this did not cause any malfunction, just do it for safety.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

1 files changed, 64 insertions, 0 deletions

diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c
index caa3875..934250b 100644
--- a/arch/x86/cpu/quark/quark.c
+++ b/arch/x86/cpu/quark/quark.c
@@ -223,6 +223,53 @@ void reset_cpu(ulong addr)
 	x86_full_reset();
 }
 
+static void quark_pcie_init(void)
+{
+	u32 val;
+
+	/* PCIe upstream non-posted & posted request size */
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
+				   CCFG_UPRS | CCFG_UNRS);
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
+				   CCFG_UPRS | CCFG_UNRS);
+
+	/* PCIe packet fast transmit mode (IPF) */
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
+
+	/* PCIe message bus idle counter (SBIC) */
+	qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
+	val |= MBC_SBIC;
+	qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
+	qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
+	val |= MBC_SBIC;
+	qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
+}
+
+static void quark_usb_init(void)
+{
+	u32 bar;
+
+	/* Change USB EHCI packet buffer OUT/IN threshold */
+	qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
+	writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
+
+	/* Disable USB device interrupts */
+	qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
+	writel(0x7f, bar + USBD_INT_MASK);
+	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
+	writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
+}
+
+int arch_early_init_r(void)
+{
+	quark_pcie_init();
+
+	quark_usb_init();
+
+	return 0;
+}
+
 int cpu_mmc_init(bd_t *bis)
 {
 	return pci_mmc_init("Quark SDHCI", mmc_supported,
@@ -256,3 +303,20 @@ int arch_misc_init(void)
 {
 	return pirq_init();
 }
+
+void board_final_cleanup(void)
+{
+	struct quark_rcba *rcba;
+	u32 base, val;
+
+	qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
+	base &= ~MEM_BAR_EN;
+	rcba = (struct quark_rcba *)base;
+
+	/* Initialize 'Component ID' to zero */
+	val = readl(&rcba->esd);
+	val &= ~0xff0000;
+	writel(val, &rcba->esd);
+
+	return;
+}