Merge git://git.denx.de/u-boot-sunxi

22 files changed, 1050 insertions, 136 deletions

diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
index 104dc90..b3a34de 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
@@ -27,6 +27,17 @@
 #define	GICD_BASE	(SUNXI_GIC400_BASE + GIC_DIST_OFFSET)
 #define	GICC_BASE	(SUNXI_GIC400_BASE + GIC_CPU_OFFSET_A15)
 
+/*
+ * R40 is different from other single cluster SoCs.
+ *
+ * The power clamps are located in the unused space after the per-core
+ * reset controls for core 3. The secondary core entry address register
+ * is in the SRAM controller address range.
+ */
+#define SUN8I_R40_PWROFF			(0x110)
+#define SUN8I_R40_PWR_CLAMP(cpu)		(0x120 + (cpu) * 0x4)
+#define SUN8I_R40_SRAMC_SOFT_ENTRY_REG0		(0xbc)
+
 static void __secure cp15_write_cntp_tval(u32 tval)
 {
 	asm volatile ("mcr p15, 0, %0, c14, c2, 0" : : "r" (tval));
@@ -68,7 +79,8 @@ static void __secure __mdelay(u32 ms)
 static void __secure clamp_release(u32 __maybe_unused *clamp)
 {
 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
-	defined(CONFIG_MACH_SUN8I_H3)
+	defined(CONFIG_MACH_SUN8I_H3) || \
+	defined(CONFIG_MACH_SUN8I_R40)
 	u32 tmp = 0x1ff;
 	do {
 		tmp >>= 1;
@@ -82,7 +94,8 @@ static void __secure clamp_release(u32 __maybe_unused *clamp)
 static void __secure clamp_set(u32 __maybe_unused *clamp)
 {
 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
-	defined(CONFIG_MACH_SUN8I_H3)
+	defined(CONFIG_MACH_SUN8I_H3) || \
+	defined(CONFIG_MACH_SUN8I_R40)
 	writel(0xff, clamp);
 #endif
 }
@@ -115,7 +128,17 @@ static void __secure sunxi_cpu_set_power(int __always_unused cpu, bool on)
 	sunxi_power_switch(&cpucfg->cpu1_pwr_clamp, &cpucfg->cpu1_pwroff,
 			   on, 0);
 }
-#else /* ! CONFIG_MACH_SUN7I */
+#elif defined CONFIG_MACH_SUN8I_R40
+static void __secure sunxi_cpu_set_power(int cpu, bool on)
+{
+	struct sunxi_cpucfg_reg *cpucfg =
+		(struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE;
+
+	sunxi_power_switch((void *)cpucfg + SUN8I_R40_PWR_CLAMP(cpu),
+			   (void *)cpucfg + SUN8I_R40_PWROFF,
+			   on, 0);
+}
+#else /* ! CONFIG_MACH_SUN7I && ! CONFIG_MACH_SUN8I_R40 */
 static void __secure sunxi_cpu_set_power(int cpu, bool on)
 {
 	struct sunxi_prcm_reg *prcm =
@@ -213,7 +236,13 @@ int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc)
 	psci_save_target_pc(cpu, pc);
 
 	/* Set secondary core power on PC */
+#ifdef CONFIG_MACH_SUN8I_R40
+	/* secondary core entry address is programmed differently */
+	writel((u32)&psci_cpu_entry,
+	       SUNXI_SRAMC_BASE + SUN8I_R40_SRAMC_SOFT_ENTRY_REG0);
+#else
 	writel((u32)&psci_cpu_entry, &cpucfg->priv0);
+#endif
 
 	/* Assert reset on target CPU */
 	writel(0, &cpucfg->cpu[cpu].rst);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5656e0d..f3f53f3 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -305,6 +305,10 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-nanopi-neo-air.dtb
+dtb-$(CONFIG_MACH_SUN8I_R40) += \
+	sun8i-r40-bananapi-m2-ultra.dtb
+dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+	sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN50I_H5) += \
 	sun50i-h5-orangepi-pc2.dtb
 dtb-$(CONFIG_MACH_SUN50I) += \
diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
new file mode 100644
index 0000000..ab471ab
--- /dev/null
+++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+/ {
+	model = "Banana Pi BPI-M2-Ultra";
+	compatible = "sinovoip,bpi-m2-ultra", "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi
new file mode 100644
index 0000000..48ec2e8
--- /dev/null
+++ b/arch/arm/dts/sun8i-r40.dtsi
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2016 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+	};
+
+	chosen {
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun8i-r40-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			/* apb should be replaced once CCU is implemented */
+			clocks = <&osc24M>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			i2c0_pins: i2c0_pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+				bias-pull-up;
+			};
+
+			uart0_pb_pins: uart0_pb_pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+				bias-pull-up;
+			};
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&osc24M>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+};
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 0000000..3d9168c
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+	model = "Lichee Pi Zero";
+	compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-names = "default";
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vcc3v3>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi
new file mode 100644
index 0000000..ebefc0f
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3s.dtsi
@@ -0,0 +1,284 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/sun8i-v3s-ccu.h>
+#include <dt-bindings/reset/sun8i-v3s-ccu.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&ccu CLK_CPU>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>,
+				 <&ccu CLK_MMC0>,
+				 <&ccu CLK_MMC0_OUTPUT>,
+				 <&ccu CLK_MMC0_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>,
+				 <&ccu CLK_MMC1>,
+				 <&ccu CLK_MMC1_OUTPUT>,
+				 <&ccu CLK_MMC1_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun7i-a20-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>,
+				 <&ccu CLK_MMC2>,
+				 <&ccu CLK_MMC2_OUTPUT>,
+				 <&ccu CLK_MMC2_SAMPLE>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@01c19000 {
+			compatible = "allwinner,sun8i-h3-musb";
+			reg = <0x01c19000 0x0400>;
+			clocks = <&ccu CLK_BUS_OTG>;
+			resets = <&ccu RST_BUS_OTG>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			status = "disabled";
+		};
+
+		usbphy: phy@01c19400 {
+			compatible = "allwinner,sun8i-v3s-usb-phy";
+			reg = <0x01c19400 0x2c>,
+			      <0x01c1a800 0x4>;
+			reg-names = "phy_ctrl",
+				    "pmu0";
+			clocks = <&ccu CLK_USB_PHY0>;
+			clock-names = "usb0_phy";
+			resets = <&ccu RST_USB_PHY0>;
+			reset-names = "usb0_reset";
+			status = "disabled";
+			#phy-cells = <1>;
+		};
+
+		ccu: clock@01c20000 {
+			compatible = "allwinner,sun8i-v3s-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		rtc: rtc@01c20400 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01c20400 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pio: pinctrl@01c20800 {
+			compatible = "allwinner,sun8i-v3s-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				pins = "PB8", "PB9";
+				function = "uart0";
+				bias-pull-up;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+};
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 1bfb48b..a44ea77 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -67,13 +67,22 @@ struct sunxi_ccm_reg {
 	u32 dram_pll_cfg;	/* 0xf8 PLL_DDR cfg register, A33 only */
 	u32 mbus_reset;		/* 0xfc MBUS reset control, A33 only */
 	u32 dram_clk_gate;	/* 0x100 DRAM module gating */
+#ifdef CONFIG_SUNXI_DE2
+	u32 de_clk_cfg;		/* 0x104 DE module clock */
+#else
 	u32 be0_clk_cfg;	/* 0x104 BE0 module clock */
+#endif
 	u32 be1_clk_cfg;	/* 0x108 BE1 module clock */
 	u32 fe0_clk_cfg;	/* 0x10c FE0 module clock */
 	u32 fe1_clk_cfg;	/* 0x110 FE1 module clock */
 	u32 mp_clk_cfg;		/* 0x114 MP module clock */
+#ifdef CONFIG_SUNXI_DE2
+	u32 lcd0_clk_cfg;	/* 0x118 LCD0 module clock */
+	u32 lcd1_clk_cfg;	/* 0x11c LCD1 module clock */
+#else
 	u32 lcd0_ch0_clk_cfg;	/* 0x118 LCD0 CH0 module clock */
 	u32 lcd1_ch0_clk_cfg;	/* 0x11c LCD1 CH0 module clock */
+#endif
 	u32 reserved14[3];
 	u32 lcd0_ch1_clk_cfg;	/* 0x12c LCD0 CH1 module clock */
 	u32 lcd1_ch1_clk_cfg;	/* 0x130 LCD1 CH1 module clock */
@@ -85,7 +94,11 @@ struct sunxi_ccm_reg {
 	u32 dmic_clk_cfg;	/* 0x148 Digital Mic module clock*/
 	u32 reserved15;
 	u32 hdmi_clk_cfg;	/* 0x150 HDMI module clock */
+#ifdef CONFIG_SUNXI_DE2
+	u32 hdmi_slow_clk_cfg;	/* 0x154 HDMI slow module clock */
+#else
 	u32 ps_clk_cfg;		/* 0x154 PS module clock */
+#endif
 	u32 mtc_clk_cfg;	/* 0x158 MTC module clock */
 	u32 mbus0_clk_cfg;	/* 0x15c MBUS0 module clock */
 	u32 mbus1_clk_cfg;	/* 0x160 MBUS1 module clock */
@@ -142,6 +155,8 @@ struct sunxi_ccm_reg {
 	u32 apb2_reset_cfg;	/* 0x2d8 APB2 Reset config */
 	u32 reserved25[5];
 	u32 ccu_sec_switch;	/* 0x2f0 CCU Security Switch, H3 only */
+	u32 reserved26[11];
+	u32 pll_lock_ctrl;	/* 0x320 PLL lock control, R40 only */
 };
 
 /* apb2 bit field */
@@ -191,6 +206,7 @@ struct sunxi_ccm_reg {
 #define CCM_PLL3_CTRL_N_MASK		(0x7f << CCM_PLL3_CTRL_N_SHIFT)
 #define CCM_PLL3_CTRL_N(n)		((((n) - 1) & 0x7f) << 8)
 #define CCM_PLL3_CTRL_INTEGER_MODE	(0x1 << 24)
+#define CCM_PLL3_CTRL_LOCK		(0x1 << 28)
 #define CCM_PLL3_CTRL_EN		(0x1 << 31)
 
 #define CCM_PLL5_CTRL_M(n)		((((n) - 1) & 0x3) << 0)
@@ -220,6 +236,16 @@ struct sunxi_ccm_reg {
 #define CCM_MIPI_PLL_CTRL_LDO_EN	(0x3 << 22)
 #define CCM_MIPI_PLL_CTRL_EN		(0x1 << 31)
 
+#define CCM_PLL10_CTRL_M_SHIFT		0
+#define CCM_PLL10_CTRL_M_MASK		(0xf << CCM_PLL10_CTRL_M_SHIFT)
+#define CCM_PLL10_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_PLL10_CTRL_N_SHIFT		8
+#define CCM_PLL10_CTRL_N_MASK		(0x7f << CCM_PLL10_CTRL_N_SHIFT)
+#define CCM_PLL10_CTRL_N(n)		((((n) - 1) & 0x7f) << 8)
+#define CCM_PLL10_CTRL_INTEGER_MODE	(0x1 << 24)
+#define CCM_PLL10_CTRL_LOCK		(0x1 << 28)
+#define CCM_PLL10_CTRL_EN		(0x1 << 31)
+
 #define CCM_PLL11_CTRL_N(n)		((((n) - 1) & 0x3f) << 8)
 #define CCM_PLL11_CTRL_SIGMA_DELTA_EN	(0x1 << 24)
 #define CCM_PLL11_CTRL_UPD		(0x1 << 30)
@@ -271,9 +297,15 @@ struct sunxi_ccm_reg {
 #define AHB_GATE_OFFSET_DRC0		25
 #define AHB_GATE_OFFSET_DE_FE0		14
 #define AHB_GATE_OFFSET_DE_BE0		12
+#define AHB_GATE_OFFSET_DE		12
 #define AHB_GATE_OFFSET_HDMI		11
+#ifndef CONFIG_SUNXI_DE2
 #define AHB_GATE_OFFSET_LCD1		5
 #define AHB_GATE_OFFSET_LCD0		4
+#else
+#define AHB_GATE_OFFSET_LCD1		4
+#define AHB_GATE_OFFSET_LCD0		3
+#endif
 
 #define CCM_MMC_CTRL_M(x)		((x) - 1)
 #define CCM_MMC_CTRL_OCLK_DLY(x)	((x) << 8)
@@ -355,6 +387,12 @@ struct sunxi_ccm_reg {
 #define CCM_LCD_CH1_CTRL_PLL7_2X	(3 << 24)
 #define CCM_LCD_CH1_CTRL_GATE		(0x1 << 31)
 
+#define CCM_LCD0_CTRL_GATE		(0x1 << 31)
+#define CCM_LCD0_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
+#define CCM_LCD1_CTRL_GATE		(0x1 << 31)
+#define CCM_LCD1_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+
 #define CCM_HDMI_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
 #define CCM_HDMI_CTRL_PLL_MASK		(3 << 24)
 #define CCM_HDMI_CTRL_PLL3		(0 << 24)
@@ -364,6 +402,8 @@ struct sunxi_ccm_reg {
 #define CCM_HDMI_CTRL_DDC_GATE		(0x1 << 30)
 #define CCM_HDMI_CTRL_GATE		(0x1 << 31)
 
+#define CCM_HDMI_SLOW_CTRL_DDC_GATE	(1 << 31)
+
 #if defined(CONFIG_MACH_SUN50I)
 #define MBUS_CLK_DEFAULT		0x81000002 /* PLL6x2 / 3 */
 #elif defined(CONFIG_MACH_SUN8I)
@@ -391,9 +431,16 @@ struct sunxi_ccm_reg {
 #define AHB_RESET_OFFSET_DRC0		25
 #define AHB_RESET_OFFSET_DE_FE0		14
 #define AHB_RESET_OFFSET_DE_BE0		12
+#define AHB_RESET_OFFSET_DE		12
 #define AHB_RESET_OFFSET_HDMI		11
+#define AHB_RESET_OFFSET_HDMI2		10
+#ifndef CONFIG_SUNXI_DE2
 #define AHB_RESET_OFFSET_LCD1		5
 #define AHB_RESET_OFFSET_LCD0		4
+#else
+#define AHB_RESET_OFFSET_LCD1		4
+#define AHB_RESET_OFFSET_LCD0		3
+#endif
 
 /* ahb_reset2 offsets */
 #define AHB_RESET_OFFSET_EPHY		2
@@ -416,6 +463,13 @@ struct sunxi_ccm_reg {
 #define CCM_DE_CTRL_PLL10		(5 << 24)
 #define CCM_DE_CTRL_GATE		(1 << 31)
 
+/* CCM bits common to all Display Engine 2.0 clock ctrl regs */
+#define CCM_DE2_CTRL_M(n)		((((n) - 1) & 0xf) << 0)
+#define CCM_DE2_CTRL_PLL_MASK		(3 << 24)
+#define CCM_DE2_CTRL_PLL6_2X		(0 << 24)
+#define CCM_DE2_CTRL_PLL10		(1 << 24)
+#define CCM_DE2_CTRL_GATE		(0x1 << 31)
+
 /* CCU security switch, H3 only */
 #define CCM_SEC_SWITCH_MBUS_NONSEC	(1 << 2)
 #define CCM_SEC_SWITCH_BUS_NONSEC	(1 << 1)
@@ -424,7 +478,9 @@ struct sunxi_ccm_reg {
 #ifndef __ASSEMBLY__
 void clock_set_pll1(unsigned int hz);
 void clock_set_pll3(unsigned int hz);
+void clock_set_pll3_factors(int m, int n);
 void clock_set_pll5(unsigned int clk, bool sigma_delta_enable);
+void clock_set_pll10(unsigned int hz);
 void clock_set_pll11(unsigned int clk, bool sigma_delta_enable);
 void clock_set_mipi_pll(unsigned int hz);
 unsigned int clock_get_pll3(void);
diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h
index e8e670e..caec865 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu.h
@@ -16,5 +16,6 @@
 #define SOCID_A64	0x1689
 #define SOCID_H3	0x1680
 #define SOCID_H5	0x1718
+#define SOCID_R40	0x1701
 
 #endif /* _SUNXI_CPU_H */
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index ea672fe..88c3f13 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -108,7 +108,7 @@ defined(CONFIG_MACH_SUN50I)
 #define SUNXI_TP_BASE			0x01c25000
 #define SUNXI_PMU_BASE			0x01c25400
 
-#ifdef CONFIG_MACH_SUN7I
+#if defined CONFIG_MACH_SUN7I || defined CONFIG_MACH_SUN8I_R40
 #define SUNXI_CPUCFG_BASE		0x01c25c00
 #endif
 
@@ -167,7 +167,9 @@ defined(CONFIG_MACH_SUN50I)
 #define SUNXI_RTC_BASE			0x01f00000
 #define SUNXI_PRCM_BASE			0x01f01400
 
-#if defined CONFIG_SUNXI_GEN_SUN6I && !defined CONFIG_MACH_SUN8I_A83T
+#if defined CONFIG_SUNXI_GEN_SUN6I && \
+    !defined CONFIG_MACH_SUN8I_A83T && \
+    !defined CONFIG_MACH_SUN8I_R40
 #define SUNXI_CPUCFG_BASE		0x01f01c00
 #endif
 
diff --git a/arch/arm/include/asm/arch-sunxi/display.h b/arch/arm/include/asm/arch-sunxi/display.h
index b64f310..93803ad 100644
--- a/arch/arm/include/asm/arch-sunxi/display.h
+++ b/arch/arm/include/asm/arch-sunxi/display.h
@@ -157,52 +157,6 @@ struct sunxi_de_be_reg {
 	u32 output_color_coef[12];	/* 0x9d0 */
 };
 
-struct sunxi_lcdc_reg {
-	u32 ctrl;			/* 0x00 */
-	u32 int0;			/* 0x04 */
-	u32 int1;			/* 0x08 */
-	u8 res0[0x04];			/* 0x0c */
-	u32 tcon0_frm_ctrl;		/* 0x10 */
-	u32 tcon0_frm_seed[6];		/* 0x14 */
-	u32 tcon0_frm_table[4];		/* 0x2c */
-	u8 res1[4];			/* 0x3c */
-	u32 tcon0_ctrl;			/* 0x40 */
-	u32 tcon0_dclk;			/* 0x44 */
-	u32 tcon0_timing_active;	/* 0x48 */
-	u32 tcon0_timing_h;		/* 0x4c */
-	u32 tcon0_timing_v;		/* 0x50 */
-	u32 tcon0_timing_sync;		/* 0x54 */
-	u32 tcon0_hv_intf;		/* 0x58 */
-	u8 res2[0x04];			/* 0x5c */
-	u32 tcon0_cpu_intf;		/* 0x60 */
-	u32 tcon0_cpu_wr_dat;		/* 0x64 */
-	u32 tcon0_cpu_rd_dat0;		/* 0x68 */
-	u32 tcon0_cpu_rd_dat1;		/* 0x6c */
-	u32 tcon0_ttl_timing0;		/* 0x70 */
-	u32 tcon0_ttl_timing1;		/* 0x74 */
-	u32 tcon0_ttl_timing2;		/* 0x78 */
-	u32 tcon0_ttl_timing3;		/* 0x7c */
-	u32 tcon0_ttl_timing4;		/* 0x80 */
-	u32 tcon0_lvds_intf;		/* 0x84 */
-	u32 tcon0_io_polarity;		/* 0x88 */
-	u32 tcon0_io_tristate;		/* 0x8c */
-	u32 tcon1_ctrl;			/* 0x90 */
-	u32 tcon1_timing_source;	/* 0x94 */
-	u32 tcon1_timing_scale;		/* 0x98 */
-	u32 tcon1_timing_out;		/* 0x9c */
-	u32 tcon1_timing_h;		/* 0xa0 */
-	u32 tcon1_timing_v;		/* 0xa4 */
-	u32 tcon1_timing_sync;		/* 0xa8 */
-	u8 res3[0x44];			/* 0xac */
-	u32 tcon1_io_polarity;		/* 0xf0 */
-	u32 tcon1_io_tristate;		/* 0xf4 */
-	u8 res4[0x108];			/* 0xf8 */
-	u32 mux_ctrl;			/* 0x200 */
-	u8 res5[0x1c];			/* 0x204 */
-	u32 lvds_ana0;			/* 0x220 */
-	u32 lvds_ana1;			/* 0x224 */
-};
-
 struct sunxi_hdmi_reg {
 	u32 version_id;			/* 0x000 */
 	u32 ctrl;			/* 0x004 */
@@ -347,63 +301,6 @@ struct sunxi_tve_reg {
 #define SUNXI_DE_BE_OUTPUT_COLOR_CTRL_ENABLE	1
 
 /*
- * LCDC register constants.
- */
-#define SUNXI_LCDC_X(x)				(((x) - 1) << 16)
-#define SUNXI_LCDC_Y(y)				(((y) - 1) << 0)
-#define SUNXI_LCDC_TCON_VSYNC_MASK		(1 << 24)
-#define SUNXI_LCDC_TCON_HSYNC_MASK		(1 << 25)
-#define SUNXI_LCDC_CTRL_IO_MAP_MASK		(1 << 0)
-#define SUNXI_LCDC_CTRL_IO_MAP_TCON0		(0 << 0)
-#define SUNXI_LCDC_CTRL_IO_MAP_TCON1		(1 << 0)
-#define SUNXI_LCDC_CTRL_TCON_ENABLE		(1 << 31)
-#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB666	((1 << 31) | (0 << 4))
-#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB565	((1 << 31) | (5 << 4))
-#define SUNXI_LCDC_TCON0_FRM_SEED		0x11111111
-#define SUNXI_LCDC_TCON0_FRM_TAB0		0x01010000
-#define SUNXI_LCDC_TCON0_FRM_TAB1		0x15151111
-#define SUNXI_LCDC_TCON0_FRM_TAB2		0x57575555
-#define SUNXI_LCDC_TCON0_FRM_TAB3		0x7f7f7777
-#define SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
-#define SUNXI_LCDC_TCON0_CTRL_ENABLE		(1 << 31)
-#define SUNXI_LCDC_TCON0_DCLK_DIV(n)		((n) << 0)
-#define SUNXI_LCDC_TCON0_DCLK_ENABLE		(0xf << 28)
-#define SUNXI_LCDC_TCON0_TIMING_H_BP(n)		(((n) - 1) << 0)
-#define SUNXI_LCDC_TCON0_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
-#define SUNXI_LCDC_TCON0_TIMING_V_BP(n)		(((n) - 1) << 0)
-#define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n)	(((n) * 2) << 16)
-#ifdef CONFIG_SUNXI_GEN_SUN6I
-#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	(1 << 20)
-#else
-#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	0 /* NA */
-#endif
-#define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n)	((n) << 26)
-#define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE	(1 << 31)
-#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(x)	((x) << 28)
-#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
-#define SUNXI_LCDC_TCON1_CTRL_INTERLACE_ENABLE	(1 << 20)
-#define SUNXI_LCDC_TCON1_CTRL_ENABLE		(1 << 31)
-#define SUNXI_LCDC_TCON1_TIMING_H_BP(n)		(((n) - 1) << 0)
-#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
-#define SUNXI_LCDC_TCON1_TIMING_V_BP(n)		(((n) - 1) << 0)
-#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n)	((n) << 16)
-#define SUNXI_LCDC_MUX_CTRL_SRC0_MASK		(0xf << 0)
-#define SUNXI_LCDC_MUX_CTRL_SRC0(x)		((x) << 0)
-#define SUNXI_LCDC_MUX_CTRL_SRC1_MASK		(0xf << 4)
-#define SUNXI_LCDC_MUX_CTRL_SRC1(x)		((x) << 4)
-#ifdef CONFIG_SUNXI_GEN_SUN6I
-#define SUNXI_LCDC_LVDS_ANA0			0x40040320
-#define SUNXI_LCDC_LVDS_ANA0_EN_MB		(1 << 31)
-#define SUNXI_LCDC_LVDS_ANA0_DRVC		(1 << 24)
-#define SUNXI_LCDC_LVDS_ANA0_DRVD(x)		((x) << 20)
-#else
-#define SUNXI_LCDC_LVDS_ANA0			0x3f310000
-#define SUNXI_LCDC_LVDS_ANA0_UPDATE		(1 << 22)
-#endif
-#define SUNXI_LCDC_LVDS_ANA1_INIT1		(0x1f << 26 | 0x1f << 10)
-#define SUNXI_LCDC_LVDS_ANA1_INIT2		(0x1f << 16 | 0x1f << 00)
-
-/*
  * HDMI register constants.
  */
 #define SUNXI_HDMI_X(x)				(((x) - 1) << 0)
diff --git a/arch/arm/include/asm/arch-sunxi/dram.h b/arch/arm/include/asm/arch-sunxi/dram.h
index 1dc8220..f452f88 100644
--- a/arch/arm/include/asm/arch-sunxi/dram.h
+++ b/arch/arm/include/asm/arch-sunxi/dram.h
@@ -24,7 +24,9 @@
 #include <asm/arch/dram_sun8i_a33.h>
 #elif defined(CONFIG_MACH_SUN8I_A83T)
 #include <asm/arch/dram_sun8i_a83t.h>
-#elif defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I)
+#elif defined(CONFIG_MACH_SUNXI_H3_H5) || \
+      defined(CONFIG_MACH_SUN8I_R40) || \
+      defined(CONFIG_MACH_SUN50I)
 #include <asm/arch/dram_sun8i_h3.h>
 #elif defined(CONFIG_MACH_SUN9I)
 #include <asm/arch/dram_sun9i.h>
diff --git a/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h
index 25d07d9..2770986 100644
--- a/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h
+++ b/arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h
@@ -15,7 +15,8 @@
 
 struct sunxi_mctl_com_reg {
 	u32 cr;			/* 0x00 control register */
-	u8 res0[0x8];		/* 0x04 */
+	u32 cr_r1;		/* 0x04 rank 1 control register (R40 only) */
+	u8 res0[0x4];		/* 0x08 */
 	u32 tmr;		/* 0x0c (unused on H3) */
 	u32 mcr[16][2];		/* 0x10 */
 	u32 bwcr;		/* 0x90 bandwidth control register */
@@ -63,6 +64,17 @@ struct sunxi_mctl_com_reg {
 #define MCTL_CR_DUAL_RANK	(0x1 << 0)
 #define MCTL_CR_SINGLE_RANK	(0x0 << 0)
 
+/*
+ * CR_R1 is a register found in the R40's DRAM controller. It sets various
+ * parameters for rank 1. Bits [11:0] have the same meaning as the bits in
+ * MCTL_CR, but they apply to rank 1 only. This implies we can have
+ * different chips for rank 1 than rank 0.
+ *
+ * As address line A15 and CS1 chip select for rank 1 are muxed on the same
+ * pin, if single rank is used, A15 must be muxed in.
+ */
+#define MCTL_CR_R1_MUX_A15	(0x1 << 21)
+
 #define PROTECT_MAGIC		(0x94be6fa3)
 
 struct sunxi_mctl_ctl_reg {
@@ -72,7 +84,8 @@ struct sunxi_mctl_ctl_reg {
 	u32 clken;		/* 0x0c */
 	u32 pgsr[2];		/* 0x10 PHY general status registers */
 	u32 statr;		/* 0x18 */
-	u8 res1[0x14];		/* 0x1c */
+	u8 res1[0x10];		/* 0x1c */
+	u32 lp3mr11;		/* 0x2c */
 	u32 mr[4];		/* 0x30 mode registers */
 	u32 pllgcr;		/* 0x40 */
 	u32 ptr[5];		/* 0x44 PHY timing registers */
@@ -120,7 +133,8 @@ struct sunxi_mctl_ctl_reg {
 	struct {		/* 0x300 DATX8 modules*/
 		u32 mdlr;		/* 0x00 master delay line register */
 		u32 lcdlr[3];		/* 0x04 local calibrated delay line registers */
-		u32 bdlr[12];		/* 0x10 bit delay line registers */
+		u32 bdlr[11];		/* 0x10 bit delay line registers */
+		u32 sdlr;		/* 0x3c output enable bit delay registers */
 		u32 gtr;		/* 0x40 general timing register */
 		u32 gcr;		/* 0x44 general configuration register */
 		u32 gsr[3];		/* 0x48 general status registers */
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 85a4ec3..24f8520 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -161,6 +161,7 @@ enum sunxi_gpio_number {
 #define SUN8I_GPB_UART2		2
 #define SUN8I_A33_GPB_UART0	3
 #define SUN8I_A83T_GPB_UART0	2
+#define SUN8I_V3S_GPB_UART0	3
 #define SUN50I_GPB_UART0	4
 
 #define SUNXI_GPC_NAND		2
diff --git a/arch/arm/include/asm/arch-sunxi/lcdc.h b/arch/arm/include/asm/arch-sunxi/lcdc.h
new file mode 100644
index 0000000..a751698
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/lcdc.h
@@ -0,0 +1,128 @@
+/*
+ * Sunxi platform timing controller register and constant defines
+ *
+ * (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ * (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _LCDC_H
+#define _LCDC_H
+
+#include <fdtdec.h>
+
+struct sunxi_lcdc_reg {
+	u32 ctrl;			/* 0x00 */
+	u32 int0;			/* 0x04 */
+	u32 int1;			/* 0x08 */
+	u8 res0[0x04];			/* 0x0c */
+	u32 tcon0_frm_ctrl;		/* 0x10 */
+	u32 tcon0_frm_seed[6];		/* 0x14 */
+	u32 tcon0_frm_table[4];		/* 0x2c */
+	u8 res1[4];			/* 0x3c */
+	u32 tcon0_ctrl;			/* 0x40 */
+	u32 tcon0_dclk;			/* 0x44 */
+	u32 tcon0_timing_active;	/* 0x48 */
+	u32 tcon0_timing_h;		/* 0x4c */
+	u32 tcon0_timing_v;		/* 0x50 */
+	u32 tcon0_timing_sync;		/* 0x54 */
+	u32 tcon0_hv_intf;		/* 0x58 */
+	u8 res2[0x04];			/* 0x5c */
+	u32 tcon0_cpu_intf;		/* 0x60 */
+	u32 tcon0_cpu_wr_dat;		/* 0x64 */
+	u32 tcon0_cpu_rd_dat0;		/* 0x68 */
+	u32 tcon0_cpu_rd_dat1;		/* 0x6c */
+	u32 tcon0_ttl_timing0;		/* 0x70 */
+	u32 tcon0_ttl_timing1;		/* 0x74 */
+	u32 tcon0_ttl_timing2;		/* 0x78 */
+	u32 tcon0_ttl_timing3;		/* 0x7c */
+	u32 tcon0_ttl_timing4;		/* 0x80 */
+	u32 tcon0_lvds_intf;		/* 0x84 */
+	u32 tcon0_io_polarity;		/* 0x88 */
+	u32 tcon0_io_tristate;		/* 0x8c */
+	u32 tcon1_ctrl;			/* 0x90 */
+	u32 tcon1_timing_source;	/* 0x94 */
+	u32 tcon1_timing_scale;		/* 0x98 */
+	u32 tcon1_timing_out;		/* 0x9c */
+	u32 tcon1_timing_h;		/* 0xa0 */
+	u32 tcon1_timing_v;		/* 0xa4 */
+	u32 tcon1_timing_sync;		/* 0xa8 */
+	u8 res3[0x44];			/* 0xac */
+	u32 tcon1_io_polarity;		/* 0xf0 */
+	u32 tcon1_io_tristate;		/* 0xf4 */
+	u8 res4[0x108];			/* 0xf8 */
+	u32 mux_ctrl;			/* 0x200 */
+	u8 res5[0x1c];			/* 0x204 */
+	u32 lvds_ana0;			/* 0x220 */
+	u32 lvds_ana1;			/* 0x224 */
+};
+
+/*
+ * LCDC register constants.
+ */
+#define SUNXI_LCDC_X(x)				(((x) - 1) << 16)
+#define SUNXI_LCDC_Y(y)				(((y) - 1) << 0)
+#define SUNXI_LCDC_TCON_VSYNC_MASK		(1 << 24)
+#define SUNXI_LCDC_TCON_HSYNC_MASK		(1 << 25)
+#define SUNXI_LCDC_CTRL_IO_MAP_MASK		(1 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON0		(0 << 0)
+#define SUNXI_LCDC_CTRL_IO_MAP_TCON1		(1 << 0)
+#define SUNXI_LCDC_CTRL_TCON_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB666	((1 << 31) | (0 << 4))
+#define SUNXI_LCDC_TCON0_FRM_CTRL_RGB565	((1 << 31) | (5 << 4))
+#define SUNXI_LCDC_TCON0_FRM_SEED		0x11111111
+#define SUNXI_LCDC_TCON0_FRM_TAB0		0x01010000
+#define SUNXI_LCDC_TCON0_FRM_TAB1		0x15151111
+#define SUNXI_LCDC_TCON0_FRM_TAB2		0x57575555
+#define SUNXI_LCDC_TCON0_FRM_TAB3		0x7f7f7777
+#define SUNXI_LCDC_TCON0_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON0_CTRL_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON0_DCLK_DIV(n)		((n) << 0)
+#define SUNXI_LCDC_TCON0_DCLK_ENABLE		(0xf << 28)
+#define SUNXI_LCDC_TCON0_TIMING_H_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON0_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
+#define SUNXI_LCDC_TCON0_TIMING_V_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON0_TIMING_V_TOTAL(n)	(((n) * 2) << 16)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	(1 << 20)
+#else
+#define SUNXI_LCDC_TCON0_LVDS_CLK_SEL_TCON0	0 /* NA */
+#endif
+#define SUNXI_LCDC_TCON0_LVDS_INTF_BITWIDTH(n)	((n) << 26)
+#define SUNXI_LCDC_TCON0_LVDS_INTF_ENABLE	(1 << 31)
+#define SUNXI_LCDC_TCON0_IO_POL_DCLK_PHASE(x)	((x) << 28)
+#define SUNXI_LCDC_TCON1_CTRL_CLK_DELAY(n)	(((n) & 0x1f) << 4)
+#define SUNXI_LCDC_TCON1_CTRL_INTERLACE_ENABLE	(1 << 20)
+#define SUNXI_LCDC_TCON1_CTRL_ENABLE		(1 << 31)
+#define SUNXI_LCDC_TCON1_TIMING_H_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_H_TOTAL(n)	(((n) - 1) << 16)
+#define SUNXI_LCDC_TCON1_TIMING_V_BP(n)		(((n) - 1) << 0)
+#define SUNXI_LCDC_TCON1_TIMING_V_TOTAL(n)	((n) << 16)
+#define SUNXI_LCDC_MUX_CTRL_SRC0_MASK		(0xf << 0)
+#define SUNXI_LCDC_MUX_CTRL_SRC0(x)		((x) << 0)
+#define SUNXI_LCDC_MUX_CTRL_SRC1_MASK		(0xf << 4)
+#define SUNXI_LCDC_MUX_CTRL_SRC1(x)		((x) << 4)
+#ifdef CONFIG_SUNXI_GEN_SUN6I
+#define SUNXI_LCDC_LVDS_ANA0			0x40040320
+#define SUNXI_LCDC_LVDS_ANA0_EN_MB		(1 << 31)
+#define SUNXI_LCDC_LVDS_ANA0_DRVC		(1 << 24)
+#define SUNXI_LCDC_LVDS_ANA0_DRVD(x)		((x) << 20)
+#else
+#define SUNXI_LCDC_LVDS_ANA0			0x3f310000
+#define SUNXI_LCDC_LVDS_ANA0_UPDATE		(1 << 22)
+#endif
+#define SUNXI_LCDC_LVDS_ANA1_INIT1		(0x1f << 26 | 0x1f << 10)
+#define SUNXI_LCDC_LVDS_ANA1_INIT2		(0x1f << 16 | 0x1f << 00)
+
+void lcdc_init(struct sunxi_lcdc_reg * const lcdc);
+void lcdc_enable(struct sunxi_lcdc_reg * const lcdc, int depth);
+void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc,
+			 const struct display_timing *mode,
+			 int clk_div, bool for_ext_vga_dac,
+			 int depth, int dclk_phase);
+void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc,
+			 const struct display_timing *mode,
+			 bool ext_hvsync, bool is_composite);
+
+#endif /* _LCDC_H */
diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h
index a665309..ccdf942 100644
--- a/arch/arm/include/asm/arch-sunxi/timer.h
+++ b/arch/arm/include/asm/arch-sunxi/timer.h
@@ -67,7 +67,7 @@ struct sunxi_timer_reg {
 	struct sunxi_timer timer[6];	/* We have 6 timers */
 	u8 res2[16];
 	struct sunxi_avs avs;
-#ifdef CONFIG_SUNXI_GEN_SUN4I
+#if defined(CONFIG_SUNXI_GEN_SUN4I) || defined(CONFIG_MACH_SUN8I_R40)
 	struct sunxi_wdog wdog;	/* 0x90 */
 	/* XXX the following is not accurate for sun5i/sun7i */
 	struct sunxi_64cnt cnt64;	/* 0xa0 */
@@ -77,8 +77,7 @@ struct sunxi_timer_reg {
 	struct sunxi_tgp tgp[4];
 	u8 res5[8];
 	u32 cpu_cfg;
-#endif
-#ifdef CONFIG_SUNXI_GEN_SUN6I
+#elif defined(CONFIG_SUNXI_GEN_SUN6I)
 	u8 res3[16];
 	struct sunxi_wdog wdog[5];	/* We have 5 watchdogs */
 #endif
diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
index 8108be9..ce6d664 100644
--- a/arch/arm/include/asm/arch-sunxi/watchdog.h
+++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
@@ -13,7 +13,10 @@
 #define WDT_CTRL_RESTART	(0x1 << 0)
 #define WDT_CTRL_KEY		(0x0a57 << 1)
 
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN5I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 
 #define WDT_MODE_EN		(0x1 << 0)
 #define WDT_MODE_RESET_EN	(0x1 << 1)
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index efab481..5510aa5 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
 obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
 obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
 obj-$(CONFIG_MACH_SUNXI_H3_H5)	+= dram_sun8i_h3.o
+obj-$(CONFIG_MACH_SUN8I_R40)	+= dram_sun8i_h3.o
 obj-$(CONFIG_MACH_SUN9I)	+= dram_sun9i.o
 obj-$(CONFIG_MACH_SUN50I)	+= dram_sun8i_h3.o
 endif
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 5e03d03..4507279 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -69,12 +69,14 @@ struct mm_region *mem_map = sunxi_mem_map;
 static int gpio_init(void)
 {
 #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
 #endif
-#if defined(CONFIG_MACH_SUN8I)
+#if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
 #else
@@ -82,7 +84,9 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
 #endif
 	sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || \
+				 defined(CONFIG_MACH_SUN7I) || \
+				 defined(CONFIG_MACH_SUN8I_R40))
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
@@ -110,6 +114,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_A83T_GPB_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(10), SUN8I_A83T_GPB_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPB(10), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN8I_V3S)
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(8), SUN8I_V3S_GPB_UART0);
+	sunxi_gpio_set_cfgpin(SUNXI_GPB(9), SUN8I_V3S_GPB_UART0);
+	sunxi_gpio_set_pull(SUNXI_GPB(9), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH_UART0);
@@ -266,7 +274,7 @@ void board_init_f(ulong dummy)
 
 void reset_cpu(ulong addr)
 {
-#ifdef CONFIG_SUNXI_GEN_SUN4I
+#if defined(CONFIG_SUNXI_GEN_SUN4I) || defined(CONFIG_MACH_SUN8I_R40)
 	static const struct sunxi_wdog *wdog =
 		 &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
 
@@ -278,8 +286,7 @@ void reset_cpu(ulong addr)
 		/* sun5i sometimes gets stuck without this */
 		writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode);
 	}
-#endif
-#ifdef CONFIG_SUNXI_GEN_SUN6I
+#elif defined(CONFIG_SUNXI_GEN_SUN6I)
 	static const struct sunxi_wdog *wdog =
 		 ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
 
diff --git a/arch/arm/mach-sunxi/clock_sun6i.c b/arch/arm/mach-sunxi/clock_sun6i.c
index 4762fbf..631bc6e 100644
--- a/arch/arm/mach-sunxi/clock_sun6i.c
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
@@ -35,6 +35,11 @@ void clock_init_safe(void)
 	clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
 #endif
 
+#if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
+	/* Set PLL lock enable bits and switch to old lock mode */
+	writel(GENMASK(12, 0), &ccm->pll_lock_ctrl);
+#endif
+
 	clock_set_pll1(408000000);
 
 	writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg);
@@ -145,6 +150,22 @@ void clock_set_pll3(unsigned int clk)
 	       &ccm->pll3_cfg);
 }
 
+#ifdef CONFIG_SUNXI_DE2
+void clock_set_pll3_factors(int m, int n)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+
+	/* PLL3 rate = 24000000 * n / m */
+	writel(CCM_PLL3_CTRL_EN | CCM_PLL3_CTRL_INTEGER_MODE |
+	       CCM_PLL3_CTRL_N(n) | CCM_PLL3_CTRL_M(m),
+	       &ccm->pll3_cfg);
+
+	while (!(readl(&ccm->pll3_cfg) & CCM_PLL3_CTRL_LOCK))
+		;
+}
+#endif
+
 void clock_set_pll5(unsigned int clk, bool sigma_delta_enable)
 {
 	struct sunxi_ccm_reg * const ccm =
@@ -217,7 +238,31 @@ done:
 }
 #endif
 
-#if defined(CONFIG_MACH_SUN8I_A33) || defined(CONFIG_MACH_SUN50I)
+#ifdef CONFIG_SUNXI_DE2
+void clock_set_pll10(unsigned int clk)
+{
+	struct sunxi_ccm_reg * const ccm =
+		(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
+	const int m = 2; /* 12 MHz steps */
+
+	if (clk == 0) {
+		clrbits_le32(&ccm->pll10_cfg, CCM_PLL10_CTRL_EN);
+		return;
+	}
+
+	/* PLL10 rate = 24000000 * n / m */
+	writel(CCM_PLL10_CTRL_EN | CCM_PLL10_CTRL_INTEGER_MODE |
+	       CCM_PLL10_CTRL_N(clk / (24000000 / m)) | CCM_PLL10_CTRL_M(m),
+	       &ccm->pll10_cfg);
+
+	while (!(readl(&ccm->pll10_cfg) & CCM_PLL10_CTRL_LOCK))
+		;
+}
+#endif
+
+#if defined(CONFIG_MACH_SUN8I_A33) || \
+    defined(CONFIG_MACH_SUN8I_R40) || \
+    defined(CONFIG_MACH_SUN50I)
 void clock_set_pll11(unsigned int clk, bool sigma_delta_enable)
 {
 	struct sunxi_ccm_reg * const ccm =
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index 85633cc..25a5ec2 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -87,6 +87,10 @@ int print_cpuinfo(void)
 	printf("CPU:   Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_H3
 	printf("CPU:   Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_R40
+	printf("CPU:   Allwinner R40 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_V3S
+	printf("CPU:   Allwinner V3s (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN9I
 	puts("CPU:   Allwinner A80 (SUN9I)\n");
 #elif defined CONFIG_MACH_SUN50I
diff --git a/arch/arm/mach-sunxi/dram_sun8i_h3.c b/arch/arm/mach-sunxi/dram_sun8i_h3.c
index d681a9d..2d12661 100644
--- a/arch/arm/mach-sunxi/dram_sun8i_h3.c
+++ b/arch/arm/mach-sunxi/dram_sun8i_h3.c
@@ -70,6 +70,12 @@ static void mctl_set_bit_delays(struct dram_para *para)
 		writel(ACBDLR_WRITE_DELAY(para->ac_delays[i]),
 		       &mctl_ctl->acbdlr[i]);
 
+#ifdef CONFIG_MACH_SUN8I_R40
+	/* DQSn, DMn, DQn output enable bit delay */
+	for (i = 0; i < 4; i++)
+		writel(0x6 << 24, &mctl_ctl->dx[i].sdlr);
+#endif
+
 	setbits_le32(&mctl_ctl->pgcr[0], 1 << 26);
 }
 
@@ -86,6 +92,9 @@ enum {
 	MBUS_PORT_DI            = 9,
 	MBUS_PORT_DE            = 10,
 	MBUS_PORT_DE_CFD        = 11,
+	MBUS_PORT_UNKNOWN1	= 12,
+	MBUS_PORT_UNKNOWN2	= 13,
+	MBUS_PORT_UNKNOWN3	= 14,
 };
 
 enum {
@@ -205,6 +214,42 @@ static void mctl_set_master_priority_h5(void)
 	MBUS_CONF(DE_CFD, true, HIGHEST, 0,  600,  400,  200);
 }
 
+static void mctl_set_master_priority_r40(void)
+{
+	struct sunxi_mctl_com_reg * const mctl_com =
+			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
+
+	/* enable bandwidth limit windows and set windows size 1us */
+	writel(399, &mctl_com->tmr);
+	writel((1 << 16), &mctl_com->bwcr);
+
+	/* set cpu high priority */
+	writel(0x00000001, &mctl_com->mapr);
+
+	/* Port 2 is reserved per Allwinner's linux-3.10 source, yet
+	 * they initialise it */
+	MBUS_CONF(     CPU, true, HIGHEST, 0,  300,  260,  150);
+	MBUS_CONF(     GPU, true, HIGHEST, 0,  600,  400,  200);
+	MBUS_CONF(  UNUSED, true, HIGHEST, 0,  512,  256,   96);
+	MBUS_CONF(     DMA, true, HIGHEST, 0,  256,  128,   32);
+	MBUS_CONF(      VE, true, HIGHEST, 0, 1900, 1500, 1000);
+	MBUS_CONF(     CSI, true, HIGHEST, 0,  150,  120,  100);
+	MBUS_CONF(    NAND, true,    HIGH, 0,  256,  128,   64);
+	MBUS_CONF(      SS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(      TS, true, HIGHEST, 0,  256,  128,   64);
+	MBUS_CONF(      DI, true,    HIGH, 0, 1024,  256,   64);
+
+	/*
+	 * The port names are probably wrong, but no correct sources
+	 * are available.
+	 */
+	MBUS_CONF(      DE, true,    HIGH, 0,  128,   48,    0);
+	MBUS_CONF(  DE_CFD, true,    HIGH, 0,  384,  256,    0);
+	MBUS_CONF(UNKNOWN1, true, HIGHEST, 0,  512,  384,  256);
+	MBUS_CONF(UNKNOWN2, true, HIGHEST, 2, 8192, 6144, 1024);
+	MBUS_CONF(UNKNOWN3, true,    HIGH, 0, 1280,  144,   64);
+}
+
 static void mctl_set_master_priority(uint16_t socid)
 {
 	switch (socid) {
@@ -217,6 +262,9 @@ static void mctl_set_master_priority(uint16_t socid)
 	case SOCID_H5:
 		mctl_set_master_priority_h5();
 		return;
+	case SOCID_R40:
+		mctl_set_master_priority_r40();
+		return;
 	}
 }
 
@@ -268,6 +316,9 @@ static void mctl_set_timing_params(uint16_t socid, struct dram_para *para)
 	writel(0x18, &mctl_ctl->mr[2]);		/* CWL=8 */
 	writel(0x0, &mctl_ctl->mr[3]);
 
+	if (socid == SOCID_R40)
+		writel(0x3, &mctl_ctl->lp3mr11);	/* odt_en[7:4] */
+
 	/* set DRAM timing */
 	writel(DRAMTMG0_TWTP(twtp) | DRAMTMG0_TFAW(tfaw) |
 	       DRAMTMG0_TRAS_MAX(trasmax) | DRAMTMG0_TRAS(tras),
@@ -383,7 +434,7 @@ static void mctl_h3_zq_calibration_quirk(struct dram_para *para)
 	}
 }
 
-static void mctl_set_cr(struct dram_para *para)
+static void mctl_set_cr(uint16_t socid, struct dram_para *para)
 {
 	struct sunxi_mctl_com_reg * const mctl_com =
 			(struct sunxi_mctl_com_reg *)SUNXI_DRAM_COM_BASE;
@@ -393,6 +444,14 @@ static void mctl_set_cr(struct dram_para *para)
 	       (para->dual_rank ? MCTL_CR_DUAL_RANK : MCTL_CR_SINGLE_RANK) |
 	       MCTL_CR_PAGE_SIZE(para->page_size) |
 	       MCTL_CR_ROW_BITS(para->row_bits), &mctl_com->cr);
+
+	if (socid == SOCID_R40) {
+		if (para->dual_rank)
+			panic("Dual rank memory not supported\n");
+
+		/* Mux pin to A15 address line for single rank memory. */
+		setbits_le32(&mctl_com->cr_r1, MCTL_CR_R1_MUX_A15);
+	}
 }
 
 static void mctl_sys_init(uint16_t socid, struct dram_para *para)
@@ -407,14 +466,14 @@ static void mctl_sys_init(uint16_t socid, struct dram_para *para)
 	clrbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MCTL);
 	clrbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MCTL);
 	clrbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_EN);
-	if (socid == SOCID_A64)
+	if (socid == SOCID_A64 || socid == SOCID_R40)
 		clrbits_le32(&ccm->pll11_cfg, CCM_PLL11_CTRL_EN);
 	udelay(10);
 
 	clrbits_le32(&ccm->dram_clk_cfg, CCM_DRAMCLK_CFG_RST);
 	udelay(1000);
 
-	if (socid == SOCID_A64) {
+	if (socid == SOCID_A64 || socid == SOCID_R40) {
 		clock_set_pll11(CONFIG_DRAM_CLK * 2 * 1000000, false);
 		clrsetbits_le32(&ccm->dram_clk_cfg,
 				CCM_DRAMCLK_CFG_DIV_MASK |
@@ -459,7 +518,7 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 
 	unsigned int i;
 
-	mctl_set_cr(para);
+	mctl_set_cr(socid, para);
 	mctl_set_timing_params(socid, para);
 	mctl_set_master_priority(socid);
 
@@ -509,6 +568,13 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 		/* dphy & aphy phase select ? */
 		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
 				(0x0 << 10) | (0x3 << 8));
+	} else if (socid == SOCID_R40) {
+		/* dx ddr_clk & hdr_clk dynamic mode (tpr13[9] == 0) */
+		clrbits_le32(&mctl_ctl->pgcr[0], (0x3 << 14) | (0x3 << 12));
+
+		/* dphy & aphy phase select ? */
+		clrsetbits_le32(&mctl_ctl->pgcr[2], (0x3 << 10) | (0x3 << 8),
+				(0x0 << 10) | (0x3 << 8));
 	}
 
 	/* set half DQ */
@@ -535,6 +601,11 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 		mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
 			      PIR_DRAMRST | PIR_DRAMINIT | PIR_QSGATE);
 		/* no PIR_QSGATE for H5 ???? */
+	} else if (socid == SOCID_R40) {
+		clrsetbits_le32(&mctl_ctl->zqcr, 0xffffff, CONFIG_DRAM_ZQ);
+
+		mctl_phy_init(PIR_ZCAL | PIR_PLLINIT | PIR_DCAL | PIR_PHYRST |
+			      PIR_DRAMRST | PIR_DRAMINIT);
 	}
 
 	/* detect ranks and bus width */
@@ -554,7 +625,7 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 			para->bus_width = 16;
 		}
 
-		mctl_set_cr(para);
+		mctl_set_cr(socid, para);
 		udelay(20);
 
 		/* re-train */
@@ -575,7 +646,7 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 	/* set PGCR3, CKE polarity */
 	if (socid == SOCID_H3)
 		writel(0x00aa0060, &mctl_ctl->pgcr[3]);
-	else if (socid == SOCID_A64 || socid == SOCID_H5)
+	else if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40)
 		writel(0xc0aa0060, &mctl_ctl->pgcr[3]);
 
 	/* power down zq calibration module for power save */
@@ -587,12 +658,12 @@ static int mctl_channel_init(uint16_t socid, struct dram_para *para)
 	return 0;
 }
 
-static void mctl_auto_detect_dram_size(struct dram_para *para)
+static void mctl_auto_detect_dram_size(uint16_t socid, struct dram_para *para)
 {
 	/* detect row address bits */
 	para->page_size = 512;
 	para->row_bits = 16;
-	mctl_set_cr(para);
+	mctl_set_cr(socid, para);
 
 	for (para->row_bits = 11; para->row_bits < 16; para->row_bits++)
 		if (mctl_mem_matches((1 << (para->row_bits + 3)) * para->page_size))
@@ -600,7 +671,7 @@ static void mctl_auto_detect_dram_size(struct dram_para *para)
 
 	/* detect page size */
 	para->page_size = 8192;
-	mctl_set_cr(para);
+	mctl_set_cr(socid, para);
 
 	for (para->page_size = 512; para->page_size < 8192; para->page_size *= 2)
 		if (mctl_mem_matches(para->page_size))
@@ -630,6 +701,22 @@ static void mctl_auto_detect_dram_size(struct dram_para *para)
 	   0,  0,  0,  0,  0,  0,  0,  0,			\
 	   0,  0,  0,  0,  0,  0,  0      }
 
+#define SUN8I_R40_DX_READ_DELAYS				\
+	{{ 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 },	\
+	 { 14, 14, 14, 14, 14, 14, 14, 14, 14,  0,  0 } }
+#define SUN8I_R40_DX_WRITE_DELAYS				\
+	{{  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 },	\
+	 {  0,  0,  0,  0,  0,  0,  0,  0,  0,  6,  0 } }
+#define SUN8I_R40_AC_DELAYS					\
+	{  0,  0,  3,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0,  0,			\
+	   0,  0,  0,  0,  0,  0,  0      }
+
 #define SUN50I_A64_DX_READ_DELAYS				\
 	{{ 16, 16, 16, 16, 17, 16, 16, 17, 16,  1,  0 },	\
 	 { 17, 17, 17, 17, 17, 17, 17, 17, 17,  1,  0 },	\
@@ -679,6 +766,10 @@ unsigned long sunxi_dram_init(void)
 		.dx_read_delays  = SUN8I_H3_DX_READ_DELAYS,
 		.dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
 		.ac_delays	 = SUN8I_H3_AC_DELAYS,
+#elif defined(CONFIG_MACH_SUN8I_R40)
+		.dx_read_delays  = SUN8I_R40_DX_READ_DELAYS,
+		.dx_write_delays = SUN8I_R40_DX_WRITE_DELAYS,
+		.ac_delays	 = SUN8I_R40_AC_DELAYS,
 #elif defined(CONFIG_MACH_SUN50I)
 		.dx_read_delays  = SUN50I_A64_DX_READ_DELAYS,
 		.dx_write_delays = SUN50I_A64_DX_WRITE_DELAYS,
@@ -696,6 +787,8 @@ unsigned long sunxi_dram_init(void)
  */
 #if defined(CONFIG_MACH_SUN8I_H3)
 	uint16_t socid = SOCID_H3;
+#elif defined(CONFIG_MACH_SUN8I_R40)
+	uint16_t socid = SOCID_R40;
 #elif defined(CONFIG_MACH_SUN50I)
 	uint16_t socid = SOCID_A64;
 #elif defined(CONFIG_MACH_SUN50I_H5)
@@ -716,9 +809,11 @@ unsigned long sunxi_dram_init(void)
 	if (socid == SOCID_H3)
 		writel(0x0c000400, &mctl_ctl->odtcfg);
 
-	if (socid == SOCID_A64 || socid == SOCID_H5) {
+	if (socid == SOCID_A64 || socid == SOCID_H5 || socid == SOCID_R40) {
+		/* VTF enable (tpr13[8] == 1) */
 		setbits_le32(&mctl_ctl->vtfcr,
-			     (socid == SOCID_H5 ? 3 : 2) << 8);
+			     (socid != SOCID_A64 ? 3 : 2) << 8);
+		/* DQ hold disable (tpr13[26] == 1) */
 		clrbits_le32(&mctl_ctl->pgcr[2], (1 << 13));
 	}
 
@@ -726,8 +821,8 @@ unsigned long sunxi_dram_init(void)
 	setbits_le32(&mctl_com->cccr, 1 << 31);
 	udelay(10);
 
-	mctl_auto_detect_dram_size(&para);
-	mctl_set_cr(&para);
+	mctl_auto_detect_dram_size(socid, &para);
+	mctl_set_cr(socid, &para);
 
 	return (1UL << (para.row_bits + 3)) * para.page_size *
 						(para.dual_rank ? 2 : 1);
diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c
index 7c57f02..f917c3e 100644
--- a/arch/arm/mach-sunxi/pmic_bus.c
+++ b/arch/arm/mach-sunxi/pmic_bus.c
@@ -41,6 +41,9 @@ int pmic_bus_init(void)
 	p2wi_init();
 	ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
 				       AXP221_INIT_DATA);
+# elif defined CONFIG_MACH_SUN8I_R40
+	/* Nothing. R40 uses the AXP221s in I2C mode */
+	ret = 0;
 # else
 	ret = rsb_init();
 	if (ret)
@@ -65,6 +68,8 @@ int pmic_bus_read(u8 reg, u8 *data)
 #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
 # ifdef CONFIG_MACH_SUN6I
 	return p2wi_read(reg, data);
+# elif defined CONFIG_MACH_SUN8I_R40
+	return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
 # else
 	return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
 # endif
@@ -80,6 +85,8 @@ int pmic_bus_write(u8 reg, u8 data)
 #elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP809_POWER || defined CONFIG_AXP818_POWER
 # ifdef CONFIG_MACH_SUN6I
 	return p2wi_write(reg, data);
+# elif defined CONFIG_MACH_SUN8I_R40
+	return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
 # else
 	return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
 # endif