summaryrefslogtreecommitdiff
path: root/board/atmel/at91sam9263ek
diff options
context:
space:
mode:
authorWenyou Yang <wenyou.yang@atmel.com>2017-04-18 07:31:01 (GMT)
committerSimon Glass <sjg@chromium.org>2017-05-09 18:14:16 (GMT)
commitbbd76227dc37377c170b6ab26ae6e594906a323f (patch)
tree4b40db03507dda65be8d906fdda8a283fb9fd83c /board/atmel/at91sam9263ek
parent0b8908f9c3b8af7e1619e0f2190ccc5d308f0347 (diff)
downloadu-boot-fsl-qoriq-bbd76227dc37377c170b6ab26ae6e594906a323f.tar.xz
board: at91sam9263ek: Clean up code
Because the introduction of the pinctrl and clk drivers and the device tree files, remove unneeded hard coded related code from the board file. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'board/atmel/at91sam9263ek')
-rw-r--r--board/atmel/at91sam9263ek/at91sam9263ek.c59
1 files changed, 0 insertions, 59 deletions
diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index e4e32f6..2aafafe 100644
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -19,11 +19,6 @@
#include <asm/arch/hardware.h>
#include <lcd.h>
#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-#include <atmel_mci.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -77,34 +72,6 @@ static void at91sam9263ek_nand_hw_init(void)
}
#endif
-#ifdef CONFIG_MACB
-static void at91sam9263ek_macb_hw_init(void)
-{
- at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
- at91_periph_clk_enable(ATMEL_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PC25) => PHY normal mode (not Test mode)
- * ERX0 (PE25) => PHY ADDR0
- * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(1 << 25, &pio->pioc.pudr);
- writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
-
- at91_phy_reset();
-
- /* Re-enable pull-up */
- writel(1 << 25, &pio->pioc.puer);
- writel((1 << 25) | (1 <<26), &pio->pioe.puer);
-
- at91_macb_hw_init();
-}
-#endif
-
#ifdef CONFIG_LCD
vidinfo_t panel_info = {
.vl_col = 240,
@@ -209,22 +176,8 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(bd_t *bd)
-{
- at91_mci_hw_init();
-
- return atmel_mci_init((void *)ATMEL_BASE_MCI1);
-}
-#endif
-
int board_early_init_f(void)
{
- at91_periph_clk_enable(ATMEL_ID_PIOA);
- at91_periph_clk_enable(ATMEL_ID_PIOB);
- at91_periph_clk_enable(ATMEL_ID_PIOCDE);
-
- at91_seriald_hw_init();
return 0;
}
@@ -242,9 +195,6 @@ int board_init(void)
at91_set_pio_output(AT91_PIO_PORTE, 20, 1); /* select spi0 clock */
at91_spi0_hw_init(1 << 0);
#endif
-#ifdef CONFIG_MACB
- at91sam9263ek_macb_hw_init();
-#endif
#ifdef CONFIG_USB_OHCI_NEW
at91_uhp_hw_init();
#endif
@@ -267,12 +217,3 @@ void reset_phy(void)
{
}
#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x00);
-#endif
- return rc;
-}