diff options
| author | Tom Rini <trini@konsulko.com> | 2016-09-20 01:55:34 (GMT) |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2016-09-20 13:30:25 (GMT) |
| commit | adf32adb706760b1c527d0d4d6b4976b36f19338 (patch) | |
| tree | e5cde6d5f66b5dd1521568f59a0a51a8b1bf19a4 /board/mpl/mip405/mip405.c | |
| parent | a4d88920e5d0b67a92f8041f5e0fac0ce027bb48 (diff) | |
| download | u-boot-fsl-qoriq-adf32adb706760b1c527d0d4d6b4976b36f19338.tar.xz | |
PowerPC: Update MIP405/MIP405T to use Kconfig better
Convert CONFIG_MIP405T from SYS_EXTRA_OPTIONS to a real config
There are two boards, MIP405 and MIP405T that have a few differences.
Start by checking for CONFIG_TARGET_MIP405. Then introduce
CONFIG_TARGET_MIP405T and use that not CONFIG_MIP405T. Next, convert
also convert the usage of CONFIG_ISO_STRING to be based on Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/mpl/mip405/mip405.c')
| -rw-r--r-- | board/mpl/mip405/mip405.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 4a0d696..8b9892b 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -92,7 +92,7 @@ typedef struct { unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */ unsigned char ecc; /* if true, ecc is enabled */ } sdram_t; -#if defined(CONFIG_MIP405T) +#if defined(CONFIG_TARGET_MIP405T) const sdram_t sdram_table[] = { { 0x0F, /* MIP405T Rev A, 64MByte -1 Board */ 3, /* Case Latenty = 3 */ @@ -168,7 +168,7 @@ const sdram_t sdram_table[] = { 0xff, 0xff } }; -#endif /*CONFIG_MIP405T */ +#endif /*CONFIG_TARGET_MIP405T */ void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG @@ -262,7 +262,7 @@ int init_sdram (void) #endif /* check board */ bc = in8 (PLD_PART_REG); -#if defined(CONFIG_MIP405T) +#if defined(CONFIG_TARGET_MIP405T) if((bc & 0x80)==0) SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n"); #else @@ -543,7 +543,7 @@ void ide_set_reset (int idereset) void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var) { -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) unsigned char bc,rc,tmp; int i; @@ -575,7 +575,7 @@ void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var) * Check Board Identity: */ /* serial String: "MIP405_1000" OR "MIP405T_1000" */ -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) #define BOARD_NAME "MIP405" #else #define BOARD_NAME "MIP405T" @@ -777,7 +777,7 @@ void print_mip405_info (void) (cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1); printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off"); printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3); -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) printf ("User Config Switch %d %d %d %d %d %d %d %d\n", (ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1, (ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1, @@ -793,7 +793,7 @@ void print_mip405_info (void) printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted"); printf ("IRQs:\n"); printf (" PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active"); -#if !defined(CONFIG_MIP405T) +#if !defined(CONFIG_TARGET_MIP405T) printf (" UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active"); printf (" UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active"); #endif |