diff options
author | wdenk <wdenk> | 2002-08-26 22:36:39 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2002-08-26 22:36:39 (GMT) |
commit | f8cac651b33efa270e4dfa1292d01a3b5d7a62cf (patch) | |
tree | 78f852cbd430308689fb44f6d2ab243cf5cdd73b /board/nx823/nx823.c | |
parent | 67c4f48a49bb428bca409b1f6b6ca03f448c3645 (diff) | |
download | u-boot-fsl-qoriq-f8cac651b33efa270e4dfa1292d01a3b5d7a62cf.tar.xz |
Initial revision
Diffstat (limited to 'board/nx823/nx823.c')
-rw-r--r-- | board/nx823/nx823.c | 485 |
1 files changed, 485 insertions, 0 deletions
diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c new file mode 100644 index 0000000..35cc9b0 --- /dev/null +++ b/board/nx823/nx823.c @@ -0,0 +1,485 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001-2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <mpc8xx.h> + +/* ------------------------------------------------------------------------- */ + +static long int dram_size (long int, long int *, long int); + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = +{ +#if (MPC8XX_SPEED <= 50000000L) + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x0F07EC04, + 0x01BBD804, + 0x1FF7F440, + 0xFFFFFC07, + 0xFFFFFFFF, + + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FE7F434, + 0xEFABE834, + 0x1FA7D435, + + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x0F07EC04, + 0x10EFDC04, + 0xF0AFFC00, + 0xF0AFFC00, + 0xF1AFFC00, + 0xFFAFFC40, + 0xFFAFFC07, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x0E07E804, + 0x01BBD000, + 0x1FF7F447, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x0E07E800, + 0x10EFD400, + 0xF0AFFC00, + 0xF0AFFC00, + 0xF1AFFC47, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF7DC84, + 0xFFFFFC04, + 0xFFFFFC84, + 0xFFFFFC07, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF, + + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, + 0xFFFFFFFF, + 0xFFFFFFFF, + 0xFFFFFFFF + +#else + + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F07FC04, + 0xEEAFEC04, + 0x11AFDC04, + 0xEFBBF800, + 0x1FF7F447, + + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF7F434, + 0xEFEBE834, + 0x1FB7D435, + + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F07FC04, + 0xEEAFEC04, + 0x10AFDC04, + 0xF0AFFC00, + 0xF0AFFC00, + 0xF1AFFC00, + 0xEFBBF800, + 0x1FF7F447, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F07FC04, + 0xEEAFE800, + 0x01BBD004, + 0x1FF7F447, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F07FC04, + 0xEEAFE800, + 0x10AFD400, + 0xF0AFFC00, + 0xF0AFFC00, + 0xE1BBF804, + 0x1FF7F447, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF7DC84, + 0xFFFFFC04, + 0xFFFFFC04, + 0xFFFFFC04, + 0xFFFFFC84, + 0xFFFFFC07, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +#endif +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + * + */ + +int checkboard (void) +{ + printf ("Board: Nexus NX823"); + return (0); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size_b1, size8, size9; + + upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + + /* + * Up to 2 Banks of 64Mbit x 2 devices + * Initial builds only have 1 + */ + memctl->memc_mptpr = CFG_MPTPR_1BK_4K; + memctl->memc_mar = 0x00000088; + + /* + * Map controller SDRAM bank 0 + */ + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + udelay(200); + + /* + * Map controller SDRAM bank 1 + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; + + /* + * Perform SDRAM initializsation sequence + */ + memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ + udelay(1); + memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */ + udelay(1); + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */ + udelay(1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */ + udelay(1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + udelay (1000); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + memctl->memc_mar = 0x00000088; + + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); + + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; +/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ + } else { /* back to 8 columns */ + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay(500); +/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ + } + + /* + * Check Bank 1 Memory Size + * use current column settings + * [9 column SDRAM may also be used in 8 column mode, + * but then only half the real size will be used.] + */ + size_b1 = dram_size (memctl->memc_mamr, (ulong *)SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); +/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ + + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay(1000); + } + + /* + * Final mapping: map bigger bank first + */ + if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ + + memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b0 > 0) { + /* + * Position Bank 0 immediately above Bank 1 + */ + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b1; + } else { + unsigned long reg; + /* + * No bank 0 + * + * invalidate bank + */ + memctl->memc_br1 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + + } else { /* SDRAM Bank 0 is bigger - map first */ + + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b1 > 0) { + /* + * Position Bank 1 immediately above Bank 0 + */ + memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) + + size_b0; + } else { + unsigned long reg; + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br2 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + } + + udelay(10000); + + return (size_b0 + size_b1); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ + +static long int dram_size (long int mamr_value, long int *base, long int maxsize) +{ + volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile long int *addr; + long int cnt, val; + + memctl->memc_mamr = mamr_value; + + for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + return (0); + } + + for (cnt = 1; ; cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + + if (val != (~cnt)) { + return (cnt * sizeof(long)); + } + } + /* NOTREACHED */ +} + +u_long *my_sernum; + +int misc_init_r (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + char tmp[50]; + u_char *e = gd->bd->bi_enetaddr; + + /* save serial numbre from flash (uniquely programmed) */ + my_sernum = malloc(8); + memcpy(my_sernum,gd->bd->bi_sernum,8); + + /* save env variables according to sernum */ + sprintf(tmp,"%08lx%08lx",my_sernum[0],my_sernum[1]); + setenv("serial#",tmp); + + sprintf(tmp,"%02x:%02x:%02x:%02x:%02x:%02x" + ,e[0],e[1],e[2],e[3],e[4],e[5]); + setenv("ethaddr",tmp); + return (0); +} + +void load_sernum_ethaddr (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + int i; + bd_t * bd = gd->bd; + + for (i = 0; i < 8; i++) { + bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i); + } + bd->bi_enetaddr[0] = 0x10; + bd->bi_enetaddr[1] = 0x20; + bd->bi_enetaddr[2] = 0x30; + bd->bi_enetaddr[3] = bd->bi_sernum[1] << 4 | bd->bi_sernum[2]; + bd->bi_enetaddr[4] = bd->bi_sernum[5]; + bd->bi_enetaddr[5] = bd->bi_sernum[6]; +} + |