diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-10-16 13:01:15 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 19:54:03 (GMT) |
commit | 6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch) | |
tree | ae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /board/tqc/tqm8260 | |
parent | 71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff) | |
download | u-boot-fsl-qoriq-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.xz |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'board/tqc/tqm8260')
-rw-r--r-- | board/tqc/tqm8260/config.mk | 2 | ||||
-rw-r--r-- | board/tqc/tqm8260/flash.c | 16 | ||||
-rw-r--r-- | board/tqc/tqm8260/tqm8260.c | 46 |
3 files changed, 32 insertions, 32 deletions
diff --git a/board/tqc/tqm8260/config.mk b/board/tqc/tqm8260/config.mk index 1fe9952..3ecfc48 100644 --- a/board/tqc/tqm8260/config.mk +++ b/board/tqc/tqm8260/config.mk @@ -25,7 +25,7 @@ # TQM8260 boards # -# This should be equal to the CFG_FLASH_BASE define in config_TQM8260.h +# This should be equal to the CONFIG_SYS_FLASH_BASE define in config_TQM8260.h # for the "final" configuration, with U-Boot in flash, or the address # in RAM where U-Boot is loaded at for debugging. # diff --git a/board/tqc/tqm8260/flash.c b/board/tqc/tqm8260/flash.c index 500af92..4a6d538 100644 --- a/board/tqc/tqm8260/flash.c +++ b/board/tqc/tqm8260/flash.c @@ -31,7 +31,7 @@ #define V_BYTE(a) (*(volatile unsigned char *)( a )) -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /*----------------------------------------------------------------------- @@ -185,13 +185,13 @@ unsigned long flash_init (void) int i; /* Init: no FLASHes known */ - for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; } /* Static FLASH Bank configuration here (only one bank) */ - size_b0 = flash_get_size (CFG_FLASH0_BASE, &flash_info[0]); + size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]); if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", size_b0, size_b0 >> 20); @@ -201,10 +201,10 @@ unsigned long flash_init (void) * protect monitor and environment sectors */ -#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE +#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE flash_protect (FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); + CONFIG_SYS_MONITOR_BASE, + CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); #endif #if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) @@ -364,7 +364,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 || (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080) { - if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) { + if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); return 1; } @@ -480,7 +480,7 @@ static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) start = get_timer (0); while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) || ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) { - if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { return (1); } } diff --git a/board/tqc/tqm8260/tqm8260.c b/board/tqc/tqm8260/tqm8260.c index f201045..3039999 100644 --- a/board/tqc/tqm8260/tqm8260.c +++ b/board/tqc/tqm8260/tqm8260.c @@ -236,7 +236,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, */ maxsize = (1 + (~orx | 0x7fff)) / 2; - /* Since CFG_SDRAM_BASE is always 0 (??), we assume that + /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that * we are configuring CS1 if base != 0 */ sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr; @@ -261,7 +261,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, * accessing the SDRAM with a single-byte transaction." * * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE. + * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. */ *sdmr_ptr = sdmr | PSDMR_OP_PREA; @@ -272,7 +272,7 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *base = c; *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */ + *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; @@ -285,10 +285,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT long size8, size9; #endif long psize, lsize; @@ -296,8 +296,8 @@ phys_size_t initdram (int board_type) psize = 16 * 1024 * 1024; lsize = 0; - memctl->memc_psrt = CFG_PSRT; - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_psrt = CONFIG_SYS_PSRT; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; #if 0 /* Just for debugging */ #define prt_br_or(brX,orX) do { \ @@ -315,37 +315,37 @@ phys_size_t initdram (int board_type) prt_br_or (br3, or3); #endif -#ifndef CFG_RAMBOOT +#ifndef CONFIG_SYS_RAMBOOT /* 60x SDRAM setup: */ - size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL, - (uchar *) CFG_SDRAM_BASE); - size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR1_9COL, - (uchar *) CFG_SDRAM_BASE); + size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, + (uchar *) CONFIG_SYS_SDRAM_BASE); + size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL, + (uchar *) CONFIG_SYS_SDRAM_BASE); if (size8 < size9) { psize = size9; printf ("(60x:9COL - %ld MB, ", psize >> 20); } else { - psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR1_8COL, - (uchar *) CFG_SDRAM_BASE); + psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, + (uchar *) CONFIG_SYS_SDRAM_BASE); printf ("(60x:8COL - %ld MB, ", psize >> 20); } /* Local SDRAM setup: */ -#ifdef CFG_INIT_LOCAL_SDRAM - memctl->memc_lsrt = CFG_LSRT; - size8 = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL, +#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM + memctl->memc_lsrt = CONFIG_SYS_LSRT; + size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, (uchar *) SDRAM_BASE2_PRELIM); - size9 = try_init (memctl, CFG_LSDMR_9COL, CFG_OR2_9COL, + size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL, (uchar *) SDRAM_BASE2_PRELIM); if (size8 < size9) { lsize = size9; printf ("Local:9COL - %ld MB) using ", lsize >> 20); } else { - lsize = try_init (memctl, CFG_LSDMR_8COL, CFG_OR2_8COL, + lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, (uchar *) SDRAM_BASE2_PRELIM); printf ("Local:8COL - %ld MB) using ", lsize >> 20); } @@ -354,11 +354,11 @@ phys_size_t initdram (int board_type) /* Set up BR2 so that the local SDRAM goes * right after the 60x SDRAM */ - memctl->memc_br2 = (CFG_BR2_PRELIM & ~BRx_BA_MSK) | - (CFG_SDRAM_BASE + psize); + memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) | + (CONFIG_SYS_SDRAM_BASE + psize); #endif -#endif /* CFG_INIT_LOCAL_SDRAM */ -#endif /* CFG_RAMBOOT */ +#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */ +#endif /* CONFIG_SYS_RAMBOOT */ icache_enable (); |