diff options
author | wdenk <wdenk> | 2003-03-06 21:55:29 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-03-06 21:55:29 (GMT) |
commit | 1cb8e980c41e86760fa93de63f4e4cf643bef9d9 (patch) | |
tree | e1993fba07dea51d92f1cec4c814a67173c1f8fb /board/trab/vfd.c | |
parent | 500545cc6b83958209128bffa825b3c842a21a4e (diff) | |
download | u-boot-fsl-qoriq-1cb8e980c41e86760fa93de63f4e4cf643bef9d9.tar.xz |
* Patches by David Müller, 31 Jan 2003:
- minimal setup for CardBus bridges
- add EEPROM read/write support in the CS8900 driver
- add support for the builtin I2C controller in the Samsung s3c24x0 chips
- add support for MPL's VCMA9 (Samsung s3c2410 based) board
* Patch by Steven Scholz, 04 Feb 2003:
add support for RTC DS1307
* Patch by Reinhard Meyer, 5 Feb 2003:
fix PLPRCR/SCCR init sequence on 8xx to allow for
changes of EBDF by software
* Patch by Vladimir Gurevich, 07 Feb 2003:
"API-compatibility patch" for 4xx I2C driver
Diffstat (limited to 'board/trab/vfd.c')
-rw-r--r-- | board/trab/vfd.c | 45 |
1 files changed, 23 insertions, 22 deletions
diff --git a/board/trab/vfd.c b/board/trab/vfd.c index fa1194c..5e601ef 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -55,7 +55,6 @@ #define BLAU 0x0C #define VIOLETT 0X0D -ulong vfdbase; ulong frame_buf_size; #define frame_buf_offs 4 @@ -86,7 +85,7 @@ void init_grid_ctrl(void) else val = ~0; - for (adr = vfdbase; adr <= (vfdbase+7168); adr += 4) { + for (adr = gd->fb_base; adr <= (gd->fb_base+7168); adr += 4) { (*(volatile ulong*)(adr)) = val; } @@ -100,7 +99,7 @@ void init_grid_ctrl(void) /* wrap arround if offset (see manual S3C2400) */ if (bit>=frame_buf_size*8) bit = bit - (frame_buf_size * 8); - adr = vfdbase + (bit/32) * 4 + (3 - (bit%32) / 8); + adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8); bit_nr = bit % 8; bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4; temp=(*(volatile unsigned char*)(adr)); @@ -117,7 +116,7 @@ void init_grid_ctrl(void) /* wrap arround if offset (see manual S3C2400) */ if (bit>=frame_buf_size*8) bit = bit-(frame_buf_size*8); - adr = vfdbase+(bit/32)*4+(3-(bit%32)/8); + adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8); bit_nr = bit%8; bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4; temp=(*(volatile unsigned char*)(adr)); @@ -138,7 +137,7 @@ void init_grid_ctrl(void) /* wrap arround if offset (see manual S3C2400) */ if (bit>=frame_buf_size*8) bit = bit - (frame_buf_size * 8); - adr = vfdbase + (bit/32) * 4 + (3 - (bit%32) / 8); + adr = gd->fb_base + (bit/32) * 4 + (3 - (bit%32) / 8); bit_nr = bit % 8; bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4; temp=(*(volatile unsigned char*)(adr)); @@ -154,7 +153,7 @@ void init_grid_ctrl(void) /* wrap arround if offset (see manual S3C2400) */ if (bit>=frame_buf_size*8) bit = bit-(frame_buf_size*8); - adr = vfdbase+(bit/32)*4+(3-(bit%32)/8); + adr = gd->fb_base+(bit/32)*4+(3-(bit%32)/8); bit_nr = bit%8; bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4; temp=(*(volatile unsigned char*)(adr)); @@ -254,7 +253,7 @@ void create_vfd_table(void) for(color=0;color<2;color++) { for(display=0;display<4;display++) { for(entry=0;entry<2;entry++) { - unsigned long adr = vfdbase; + unsigned long adr = gd->fb_base; unsigned int bit_nr = 0; if (vfd_table[x][y][color][display][entry]) { @@ -266,7 +265,7 @@ void create_vfd_table(void) */ if (pixel>=frame_buf_size*8) pixel = pixel-(frame_buf_size*8); - adr = vfdbase+(pixel/32)*4+(3-(pixel%32)/8); + adr = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8); bit_nr = pixel%8; bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4; } @@ -375,7 +374,7 @@ int vfd_init_clocks(void) rPCCON = (rPCCON & 0xFFFFFF00)| 0x000000AA; /* Port-Pins als LCD-Ausgang */ rPDCON = (rPDCON & 0xFFFFFF03)| 0x000000A8; -#ifdef WITH_VFRAME +#ifdef CFG_WITH_VFRAME /* mit VFRAME zum Messen */ rPDCON = (rPDCON & 0xFFFFFF00)| 0x000000AA; #endif @@ -385,10 +384,18 @@ int vfd_init_clocks(void) rLCDCON4 = 0x00000001; rLCDCON5 = 0x00000440; rLCDCON1 = 0x00000B75; + + return 0; } /* * initialize LCD-Controller of the S3C2400 for using VFDs + * + * VFD detection depends on the board revision: + * starting from Rev. 200 a type code can be read from the data pins, + * driven by some pull-up resistors; all earlier systems must be + * manually configured. The type is set in the "vfd_type" environment + * variable. */ int drv_vfd_init(void) { @@ -406,21 +413,15 @@ int drv_vfd_init(void) /* try to determine display type from the value * defined by pull-ups */ - rPCUP = (rPCUP | 0x000F); /* activate GPC0...GPC3 pullups */ + rPCUP = (rPCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */ rPCCON = (rPCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */ + udelay(10); /* allow signals to settle */ vfd_id = (~rPCDAT) & 0x000F; /* read GPC0...GPC3 port pins */ debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_id); switch (vfd_id) { - case 0: /* board revision <= Rev.100 */ -/*-----*/ - gd->vfd_inv_data = 0; - if (0) - gd->vfd_type = VFD_TYPE_MN11236; - else - gd->vfd_type = VFD_TYPE_T119C; -/*-----*/ + case 0: /* board revision < Rev.200 */ if ((tmp = getenv ("vfd_type")) == NULL) { break; } @@ -435,7 +436,7 @@ int drv_vfd_init(void) gd->vfd_inv_data = 0; break; - default: /* default to MN11236, data inverted */ + default: /* default to MN11236, data inverted */ gd->vfd_type = VFD_TYPE_MN11236; gd->vfd_inv_data = 1; setenv ("vfd_type", "MN11236"); @@ -446,7 +447,7 @@ int drv_vfd_init(void) "unknown", gd->vfd_inv_data ? ", inverted data" : ""); - vfdbase = gd->fb_base; + gd->fb_base = gd->fb_base; create_vfd_table(); init_grid_ctrl(); @@ -463,9 +464,9 @@ int drv_vfd_init(void) * see manual S3C2400 */ /* frame buffer startadr */ - rLCDSADDR1 = vfdbase >> 1; + rLCDSADDR1 = gd->fb_base >> 1; /* frame buffer endadr */ - rLCDSADDR2 = (vfdbase + frame_buf_size) >> 1; + rLCDSADDR2 = (gd->fb_base + frame_buf_size) >> 1; rLCDSADDR3 = ((256/4)); debug ("LCDSADDR1: %lX\n", rLCDSADDR1); |