diff options
| author | Lokesh Vutla <lokeshvutla@ti.com> | 2015-09-19 09:30:23 (GMT) |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2015-10-22 18:22:11 (GMT) |
| commit | 1985abe207c4f37357b44a79dcd481602d8f83d1 (patch) | |
| tree | 14992b343547660adb462d59f041eef9f79d8e6e /board | |
| parent | 16d7f5b51a99139de676ce9c09f1f446c0f75c67 (diff) | |
| download | u-boot-fsl-qoriq-1985abe207c4f37357b44a79dcd481602d8f83d1.tar.xz | |
ARM: keystone2: Use dtb images by default
Now that OF_CONTROL is enabled on all keystone2 platforms,
build the default images with DT.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'board')
| -rw-r--r-- | board/ti/ks2_evm/README | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index b8d55e7..0fe5c3b 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -59,8 +59,8 @@ Supported boot modes: - UART boot Supported image formats: - - u-boot.bin: for loading and running u-boot.bin through Texas instruments - code composure studio (CCS) and for UART boot. + - u-boot-dtb.bin: for loading and running u-boot-dtb.bin through + Texas Instruments code composure studio (CCS) and for UART boot. - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot - MLO: gpimage for programming AEMIF NAND flash for NAND boot @@ -69,18 +69,18 @@ Build instructions: Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly. Don't forget to add ARCH=arm and CROSS_COMPILE. -To build u-boot.bin, u-boot-spi.gph, MLO: +To build u-boot-dtb.bin, u-boot-spi.gph, MLO: >make k2hk_evm_defconfig >make Load and Run U-Boot on keystone EVMs using CCS ========================================= -Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin +Need Code Composer Studio (CCS) installed on a PC to load and run u-boot-dtb.bin on EVM. See instructions at below link for installing CCS on a Windows PC. http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# Installing_Code_Composer_Studio -Use u-boot.bin from the build folder for loading and running u-boot binary +Use u-boot-dtb.bin from the build folder for loading and running u-boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup @@ -100,7 +100,7 @@ loading the u-boot binary on the target EVM. Instead do the following:- is connected: Unknown)" at the debug window (This is created once Target configuration is launched) and select "Connect Target". 2. Once target connect is successful, choose Tools->Load Memory option from the - top level menu. At the Load Memory window, choose the file u-boot.bin + top level menu. At the Load Memory window, choose the file u-boot-dtb.bin through "Browse" button and click "next >" button. In the next window, enter Start address as 0xc001000, choose Type-size "32 bits" and click "Finish" button. @@ -167,7 +167,7 @@ Load and Run U-Boot on keystone EVMs using UART download Open BMC and regular UART terminals. -1. On the regular UART port start xmodem transfer of the u-boot.bin +1. On the regular UART port start xmodem transfer of the u-boot-dtb.bin 2. Using BMC terminal set the ARM-UART bootmode and reboot the EVM BMC> bootmode #4 MBC> reboot |