FPGA: move fpga drivers to drivers/fpga

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 0 insertions, 554 deletions

diff --git a/common/virtex2.c b/common/virtex2.c
deleted file mode 100644
index 50d0921..0000000
--- a/common/virtex2.c
+++ /dev/null
@@ -1,554 +0,0 @@
-/*
- * (C) Copyright 2002
- * Rich Ireland, Enterasys Networks, rireland@enterasys.com.
- * Keith Outwater, keith_outwater@mvis.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Configuration support for Xilinx Virtex2 devices.  Based
- * on spartan2.c (Rich Ireland, rireland@enterasys.com).
- */
-
-#include <common.h>
-#include <virtex2.h>
-
-#if 0
-#define FPGA_DEBUG
-#endif
-
-#ifdef	FPGA_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-/*
- * If the SelectMap interface can be overrun by the processor, define
- * CONFIG_SYS_FPGA_CHECK_BUSY and/or CONFIG_FPGA_DELAY in the board configuration
- * file and add board-specific support for checking BUSY status. By default,
- * assume that the SelectMap interface cannot be overrun.
- */
-#ifndef CONFIG_SYS_FPGA_CHECK_BUSY
-#undef CONFIG_SYS_FPGA_CHECK_BUSY
-#endif
-
-#ifndef CONFIG_FPGA_DELAY
-#define CONFIG_FPGA_DELAY()
-#endif
-
-#ifndef CONFIG_SYS_FPGA_PROG_FEEDBACK
-#define CONFIG_SYS_FPGA_PROG_FEEDBACK
-#endif
-
-/*
- * Don't allow config cycle to be interrupted
- */
-#ifndef CONFIG_SYS_FPGA_CHECK_CTRLC
-#undef CONFIG_SYS_FPGA_CHECK_CTRLC
-#endif
-
-/*
- * Check for errors during configuration by default
- */
-#ifndef CONFIG_SYS_FPGA_CHECK_ERROR
-#define CONFIG_SYS_FPGA_CHECK_ERROR
-#endif
-
-/*
- * The default timeout in mS for INIT_B to deassert after PROG_B has
- * been deasserted. Per the latest Virtex II Handbook (page 347), the
- * max time from PORG_B deassertion to INIT_B deassertion is 4uS per
- * data frame for the XC2V8000.  The XC2V8000 has 2860 data frames
- * which yields 11.44 mS.  So let's make it bigger in order to handle
- * an XC2V1000, if anyone can ever get ahold of one.
- */
-#ifndef CONFIG_SYS_FPGA_WAIT_INIT
-#define CONFIG_SYS_FPGA_WAIT_INIT	CONFIG_SYS_HZ/2	/* 500 ms */
-#endif
-
-/*
- * The default timeout for waiting for BUSY to deassert during configuration.
- * This is normally not necessary since for most reasonable configuration
- * clock frequencies (i.e. 66 MHz or less), BUSY monitoring is unnecessary.
- */
-#ifndef CONFIG_SYS_FPGA_WAIT_BUSY
-#define CONFIG_SYS_FPGA_WAIT_BUSY	CONFIG_SYS_HZ/200	/* 5 ms*/
-#endif
-
-/* Default timeout for waiting for FPGA to enter operational mode after
- * configuration data has been written.
- */
-#ifndef	CONFIG_SYS_FPGA_WAIT_CONFIG
-#define CONFIG_SYS_FPGA_WAIT_CONFIG	CONFIG_SYS_HZ/5	/* 200 ms */
-#endif
-
-static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize);
-static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize);
-static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset);
-
-static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize);
-static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize);
-static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset);
-
-int Virtex2_load (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	int ret_val = FPGA_FAIL;
-
-	switch (desc->iface) {
-	case slave_serial:
-		PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
-		ret_val = Virtex2_ss_load (desc, buf, bsize);
-		break;
-
-	case slave_selectmap:
-		PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_load (desc, buf, bsize);
-		break;
-
-	default:
-		printf ("%s: Unsupported interface type, %d\n",
-				__FUNCTION__, desc->iface);
-	}
-	return ret_val;
-}
-
-int Virtex2_dump (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	int ret_val = FPGA_FAIL;
-
-	switch (desc->iface) {
-	case slave_serial:
-		PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ss_dump (desc, buf, bsize);
-		break;
-
-	case slave_parallel:
-		PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
-		ret_val = Virtex2_ssm_dump (desc, buf, bsize);
-		break;
-
-	default:
-		printf ("%s: Unsupported interface type, %d\n",
-				__FUNCTION__, desc->iface);
-	}
-	return ret_val;
-}
-
-int Virtex2_info (Xilinx_desc * desc)
-{
-	return FPGA_SUCCESS;
-}
-
-int Virtex2_reloc (Xilinx_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;
-
-	if (desc->family != Xilinx_Virtex2) {
-		printf ("%s: Unsupported family type, %d\n",
-				__FUNCTION__, desc->family);
-		return FPGA_FAIL;
-	} else
-		switch (desc->iface) {
-		case slave_serial:
-			ret_val = Virtex2_ss_reloc (desc, reloc_offset);
-			break;
-
-		case slave_selectmap:
-			ret_val = Virtex2_ssm_reloc (desc, reloc_offset);
-			break;
-
-		default:
-			printf ("%s: Unsupported interface type, %d\n",
-					__FUNCTION__, desc->iface);
-		}
-	return ret_val;
-}
-
-/*
- * Virtex-II Slave SelectMap configuration loader. Configuration via
- * SelectMap is as follows:
- * 1. Set the FPGA's PROG_B line low.
- * 2. Set the FPGA's PROG_B line high.  Wait for INIT_B to go high.
- * 3. Write data to the SelectMap port.  If INIT_B goes low at any time
- *    this process, a configuration error (most likely CRC failure) has
- *    ocurred.  At this point a status word may be read from the
- *    SelectMap interface to determine the source of the problem (You
- *    could, for instance, put this in your 'abort' function handler).
- * 4. After all data has been written, test the state of the FPGA
- *    INIT_B and DONE lines.  If both are high, configuration has
- *    succeeded. Congratulations!
- */
-static int Virtex2_ssm_load (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
-
-	PRINTF ("%s:%d: Start with interface functions @ 0x%p\n",
-			__FUNCTION__, __LINE__, fn);
-
-	if (fn) {
-		size_t bytecount = 0;
-		unsigned char *data = (unsigned char *) buf;
-		int cookie = desc->cookie;
-		unsigned long ts;
-
-		/* Gotta split this one up (so the stack won't blow??) */
-		PRINTF ("%s:%d: Function Table:\n"
-				"  base   0x%p\n"
-				"  struct 0x%p\n"
-				"  pre    0x%p\n"
-				"  prog   0x%p\n"
-				"  init   0x%p\n"
-				"  error  0x%p\n",
-				__FUNCTION__, __LINE__,
-				&fn, fn, fn->pre, fn->pgm, fn->init, fn->err);
-		PRINTF ("  clock  0x%p\n"
-				"  cs     0x%p\n"
-				"  write  0x%p\n"
-				"  rdata  0x%p\n"
-				"  wdata  0x%p\n"
-				"  busy   0x%p\n"
-				"  abort  0x%p\n"
-				"  post   0x%p\n\n",
-				fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata,
-				fn->busy, fn->abort, fn->post);
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		printf ("Initializing FPGA Device %d...\n", cookie);
-#endif
-		/*
-		 * Run the pre configuration function if there is one.
-		 */
-		if (*fn->pre) {
-			(*fn->pre) (cookie);
-		}
-
-		/*
-		 * Assert the program line.  The minimum pulse width for
-		 * Virtex II devices is 300 nS (Tprogram parameter in datasheet).
-		 * There is no maximum value for the pulse width.  Check to make
-		 * sure that INIT_B goes low after assertion of PROG_B
-		 */
-		(*fn->pgm) (TRUE, TRUE, cookie);
-		udelay (10);
-		ts = get_timer (0);
-		do {
-			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
-				printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
-						" to assert.\n", __FUNCTION__, __LINE__,
-						CONFIG_SYS_FPGA_WAIT_INIT);
-				(*fn->abort) (cookie);
-				return FPGA_FAIL;
-			}
-		} while (!(*fn->init) (cookie));
-
-		(*fn->pgm) (FALSE, TRUE, cookie);
-		CONFIG_FPGA_DELAY ();
-		(*fn->clk) (TRUE, TRUE, cookie);
-
-		/*
-		 * Start a timer and wait for INIT_B to go high
-		 */
-		ts = get_timer (0);
-		do {
-			CONFIG_FPGA_DELAY ();
-			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_INIT) {
-				printf ("%s:%d: ** Timeout after %d ticks waiting for INIT"
-						" to deassert.\n", __FUNCTION__, __LINE__,
-						CONFIG_SYS_FPGA_WAIT_INIT);
-				(*fn->abort) (cookie);
-				return FPGA_FAIL;
-			}
-		} while ((*fn->init) (cookie) && (*fn->busy) (cookie));
-
-		(*fn->wr) (TRUE, TRUE, cookie);
-		(*fn->cs) (TRUE, TRUE, cookie);
-
-		udelay (10000);
-
-		/*
-		 * Load the data byte by byte
-		 */
-		while (bytecount < bsize) {
-#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
-			if (ctrlc ()) {
-				(*fn->abort) (cookie);
-				return FPGA_FAIL;
-			}
-#endif
-
-			if ((*fn->done) (cookie) == FPGA_SUCCESS) {
-			    PRINTF ("%s:%d:done went active early, bytecount = %d\n",
-				    __FUNCTION__, __LINE__, bytecount);
-			    break;
-			}
-
-#ifdef CONFIG_SYS_FPGA_CHECK_ERROR
-			if ((*fn->init) (cookie)) {
-				printf ("\n%s:%d:  ** Error: INIT asserted during"
-						" configuration\n", __FUNCTION__, __LINE__);
-				printf ("%d = buffer offset, %d = buffer size\n",
-					bytecount, bsize);
-				(*fn->abort) (cookie);
-				return FPGA_FAIL;
-			}
-#endif
-
-			(*fn->wdata) (data[bytecount++], TRUE, cookie);
-			CONFIG_FPGA_DELAY ();
-
-			/*
-			 * Cycle the clock pin
-			 */
-			(*fn->clk) (FALSE, TRUE, cookie);
-			CONFIG_FPGA_DELAY ();
-			(*fn->clk) (TRUE, TRUE, cookie);
-
-#ifdef CONFIG_SYS_FPGA_CHECK_BUSY
-			ts = get_timer (0);
-			while ((*fn->busy) (cookie)) {
-				if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_BUSY) {
-					printf ("%s:%d: ** Timeout after %d ticks waiting for"
-							" BUSY to deassert\n",
-							__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_BUSY);
-					(*fn->abort) (cookie);
-					return FPGA_FAIL;
-				}
-			}
-#endif
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-			if (bytecount % (bsize / 40) == 0)
-				putc ('.');
-#endif
-		}
-
-		/*
-		 * Finished writing the data; deassert FPGA CS_B and WRITE_B signals.
-		 */
-		CONFIG_FPGA_DELAY ();
-		(*fn->cs) (FALSE, TRUE, cookie);
-		(*fn->wr) (FALSE, TRUE, cookie);
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		putc ('\n');
-#endif
-
-		/*
-		 * Check for successful configuration.  FPGA INIT_B and DONE should
-		 * both be high upon successful configuration.
-		 */
-		ts = get_timer (0);
-		ret_val = FPGA_SUCCESS;
-		while (((*fn->done) (cookie) == FPGA_FAIL) || (*fn->init) (cookie)) {
-			if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT_CONFIG) {
-				printf ("%s:%d: ** Timeout after %d ticks waiting for DONE to"
-						"assert and INIT to deassert\n",
-						__FUNCTION__, __LINE__, CONFIG_SYS_FPGA_WAIT_CONFIG);
-				(*fn->abort) (cookie);
-				ret_val = FPGA_FAIL;
-				break;
-			}
-		}
-
-		if (ret_val == FPGA_SUCCESS) {
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-			printf ("Initialization of FPGA device %d complete\n", cookie);
-#endif
-			/*
-			 * Run the post configuration function if there is one.
-			 */
-			if (*fn->post) {
-				(*fn->post) (cookie);
-			}
-		} else {
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-			printf ("** Initialization of FPGA device %d FAILED\n",
-					cookie);
-#endif
-		}
-	} else {
-		printf ("%s:%d: NULL Interface function table!\n",
-				__FUNCTION__, __LINE__);
-	}
-	return ret_val;
-}
-
-/*
- * Read the FPGA configuration data
- */
-static int Virtex2_ssm_dump (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns;
-
-	if (fn) {
-		unsigned char *data = (unsigned char *) buf;
-		size_t bytecount = 0;
-		int cookie = desc->cookie;
-
-		printf ("Starting Dump of FPGA Device %d...\n", cookie);
-
-		(*fn->cs) (TRUE, TRUE, cookie);
-		(*fn->clk) (TRUE, TRUE, cookie);
-
-		while (bytecount < bsize) {
-#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC
-			if (ctrlc ()) {
-				(*fn->abort) (cookie);
-				return FPGA_FAIL;
-			}
-#endif
-			/*
-			 * Cycle the clock and read the data
-			 */
-			(*fn->clk) (FALSE, TRUE, cookie);
-			(*fn->clk) (TRUE, TRUE, cookie);
-			(*fn->rdata) (&(data[bytecount++]), cookie);
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-			if (bytecount % (bsize / 40) == 0)
-				putc ('.');
-#endif
-		}
-
-		/*
-		 * Deassert CS_B and cycle the clock to deselect the device.
-		 */
-		(*fn->cs) (FALSE, FALSE, cookie);
-		(*fn->clk) (FALSE, TRUE, cookie);
-		(*fn->clk) (TRUE, TRUE, cookie);
-
-#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
-		putc ('\n');
-#endif
-		puts ("Done.\n");
-	} else {
-		printf ("%s:%d: NULL Interface function table!\n",
-				__FUNCTION__, __LINE__);
-	}
-	return ret_val;
-}
-
-/*
- * Relocate the addresses in the function table from FLASH (or ROM,
- * or whatever) to RAM.
- */
-static int Virtex2_ssm_reloc (Xilinx_desc * desc, ulong reloc_offset)
-{
-	ulong addr;
-	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_SelectMap_fns *fn_r, *fn =
-			(Xilinx_Virtex2_Slave_SelectMap_fns *) (desc->iface_fns);
-
-	if (fn) {
-		/*
-		 * Get the relocated table address
-		 */
-		addr = (ulong) fn + reloc_offset;
-		fn_r = (Xilinx_Virtex2_Slave_SelectMap_fns *) addr;
-
-		/*
-		 * Check to see if the table has already been relocated.  If not, do
-		 * a sanity check to make sure there is a faithful copy of the
-		 * FLASH based function table in RAM, then adjust the table.
-		 */
-		if (!fn_r->relocated) {
-			if (memcmp
-				(fn_r, fn, sizeof (Xilinx_Virtex2_Slave_SelectMap_fns))
-				== 0) {
-				desc->iface_fns = fn_r;
-			} else {
-				PRINTF ("%s:%d: Invalid function table at 0x%p\n",
-						__FUNCTION__, __LINE__, fn_r);
-				return FPGA_FAIL;
-			}
-
-			PRINTF ("%s:%d: Relocating descriptor at 0x%p\n",
-					__FUNCTION__, __LINE__, desc);
-
-			addr = (ulong) (fn->pre) + reloc_offset;
-			fn_r->pre = (Xilinx_pre_fn) addr;
-			addr = (ulong) (fn->pgm) + reloc_offset;
-			fn_r->pgm = (Xilinx_pgm_fn) addr;
-			addr = (ulong) (fn->init) + reloc_offset;
-			fn_r->init = (Xilinx_init_fn) addr;
-			addr = (ulong) (fn->done) + reloc_offset;
-			fn_r->done = (Xilinx_done_fn) addr;
-			addr = (ulong) (fn->err) + reloc_offset;
-			fn_r->err = (Xilinx_err_fn) addr;
-			addr = (ulong) (fn->clk) + reloc_offset;
-			fn_r->clk = (Xilinx_clk_fn) addr;
-			addr = (ulong) (fn->cs) + reloc_offset;
-			fn_r->cs = (Xilinx_cs_fn) addr;
-			addr = (ulong) (fn->wr) + reloc_offset;
-			fn_r->wr = (Xilinx_wr_fn) addr;
-			addr = (ulong) (fn->rdata) + reloc_offset;
-			fn_r->rdata = (Xilinx_rdata_fn) addr;
-			addr = (ulong) (fn->wdata) + reloc_offset;
-			fn_r->wdata = (Xilinx_wdata_fn) addr;
-			addr = (ulong) (fn->busy) + reloc_offset;
-			fn_r->busy = (Xilinx_busy_fn) addr;
-			addr = (ulong) (fn->abort) + reloc_offset;
-			fn_r->abort = (Xilinx_abort_fn) addr;
-			addr = (ulong) (fn->post) + reloc_offset;
-			fn_r->post = (Xilinx_post_fn) addr;
-			fn_r->relocated = TRUE;
-		} else {
-			printf ("%s:%d: Function table @0x%p has already been relocated\n", __FUNCTION__, __LINE__, fn_r);
-			desc->iface_fns = fn_r;
-		}
-		ret_val = FPGA_SUCCESS;
-	} else {
-		printf ("%s: NULL Interface function table!\n", __FUNCTION__);
-	}
-	return ret_val;
-}
-
-static int Virtex2_ss_load (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__);
-	return FPGA_FAIL;
-}
-
-static int Virtex2_ss_dump (Xilinx_desc * desc, void *buf, size_t bsize)
-{
-	printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__);
-	return FPGA_FAIL;
-}
-
-static int Virtex2_ss_reloc (Xilinx_desc * desc, ulong reloc_offset)
-{
-	int ret_val = FPGA_FAIL;
-	Xilinx_Virtex2_Slave_Serial_fns *fn =
-			(Xilinx_Virtex2_Slave_Serial_fns *) (desc->iface_fns);
-
-	if (fn) {
-		printf ("%s:%d: Slave Serial Loading is unsupported\n",
-				__FUNCTION__, __LINE__);
-	} else {
-		printf ("%s:%d: NULL Interface function table!\n",
-				__FUNCTION__, __LINE__);
-	}
-	return ret_val;
-}
-
-/* vim: set ts=4 tw=78: */