diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-10-16 13:01:15 (GMT) |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 19:54:03 (GMT) |
commit | 6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch) | |
tree | ae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /cpu/arm926ejs | |
parent | 71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff) | |
download | u-boot-fsl-qoriq-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.xz |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'cpu/arm926ejs')
-rw-r--r-- | cpu/arm926ejs/at91/spi.c | 8 | ||||
-rw-r--r-- | cpu/arm926ejs/at91/timer.c | 2 | ||||
-rw-r--r-- | cpu/arm926ejs/at91/usb.c | 4 | ||||
-rw-r--r-- | cpu/arm926ejs/cpu.c | 2 | ||||
-rw-r--r-- | cpu/arm926ejs/davinci/i2c.c | 2 | ||||
-rw-r--r-- | cpu/arm926ejs/davinci/nand.c | 48 | ||||
-rw-r--r-- | cpu/arm926ejs/davinci/timer.c | 8 | ||||
-rw-r--r-- | cpu/arm926ejs/omap/timer.c | 18 | ||||
-rw-r--r-- | cpu/arm926ejs/start.S | 12 | ||||
-rwxr-xr-x | cpu/arm926ejs/versatile/timer.c | 20 |
10 files changed, 62 insertions, 62 deletions
diff --git a/cpu/arm926ejs/at91/spi.c b/cpu/arm926ejs/at91/spi.c index c9fe6d8..3eb252c 100644 --- a/cpu/arm926ejs/at91/spi.c +++ b/cpu/arm926ejs/at91/spi.c @@ -48,7 +48,7 @@ void AT91F_SpiInit(void) ((AT91_MASTER_CLOCK / AT91_SPI_CLK) << 8), AT91_BASE_SPI + AT91_SPI_CSR(0)); -#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS1 +#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 /* Configure CS1 */ writel(AT91_SPI_NCPHA | (AT91_SPI_DLYBS & DATAFLASH_TCSS) | @@ -57,7 +57,7 @@ void AT91F_SpiInit(void) AT91_BASE_SPI + AT91_SPI_CSR(1)); #endif -#ifdef CFG_DATAFLASH_LOGIC_ADDR_CS3 +#ifdef CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 /* Configure CS3 */ writel(AT91_SPI_NCPHA | (AT91_SPI_DLYBS & DATAFLASH_TCSS) | @@ -144,11 +144,11 @@ unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) writel(AT91_SPI_TXTEN + AT91_SPI_RXTEN, AT91_BASE_SPI + AT91_SPI_PTCR); while (!(readl(AT91_BASE_SPI + AT91_SPI_SR) & AT91_SPI_RXBUFF) && - ((timeout = get_timer_masked()) < CFG_SPI_WRITE_TOUT)); + ((timeout = get_timer_masked()) < CONFIG_SYS_SPI_WRITE_TOUT)); writel(AT91_SPI_TXTDIS + AT91_SPI_RXTDIS, AT91_BASE_SPI + AT91_SPI_PTCR); pDesc->state = IDLE; - if (timeout >= CFG_SPI_WRITE_TOUT) { + if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT) { printf("Error Timeout\n\r"); return DATAFLASH_ERROR; } diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c index c79ec7e..fec545b 100644 --- a/cpu/arm926ejs/at91/timer.c +++ b/cpu/arm926ejs/at91/timer.c @@ -130,7 +130,7 @@ ulong get_tbclk(void) { ulong tbclk; - tbclk = CFG_HZ; + tbclk = CONFIG_SYS_HZ; return tbclk; } diff --git a/cpu/arm926ejs/at91/usb.c b/cpu/arm926ejs/at91/usb.c index 2a92f73..7cb082d 100644 --- a/cpu/arm926ejs/at91/usb.c +++ b/cpu/arm926ejs/at91/usb.c @@ -23,7 +23,7 @@ #include <common.h> -#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) +#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) #include <asm/arch/hardware.h> #include <asm/arch/io.h> @@ -59,4 +59,4 @@ int usb_cpu_init_fail(void) return usb_cpu_stop(); } -#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c index 56c6289..48a2c0b 100644 --- a/cpu/arm926ejs/cpu.c +++ b/cpu/arm926ejs/cpu.c @@ -95,7 +95,7 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; + IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif return 0; diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c index af9dc03..d220a4c 100644 --- a/cpu/arm926ejs/davinci/i2c.c +++ b/cpu/arm926ejs/davinci/i2c.c @@ -104,7 +104,7 @@ void i2c_init(int speed, int slaveadd) } psc = 2; - div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */ + div = (CONFIG_SYS_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */ REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */ REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */ REG(I2C_SCLH) = div - REG(I2C_SCLL); diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c index f7cf0c9..014e2b0 100644 --- a/cpu/arm926ejs/davinci/nand.c +++ b/cpu/arm926ejs/davinci/nand.c @@ -44,14 +44,14 @@ #include <common.h> #include <asm/io.h> -#ifdef CFG_USE_NAND +#ifdef CONFIG_SYS_USE_NAND #if !defined(CONFIG_NAND_LEGACY) #include <nand.h> #include <asm/arch/nand_defs.h> #include <asm/arch/emif_defs.h> -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; +extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE]; static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -87,11 +87,11 @@ static void nand_davinci_select_chip(struct mtd_info *mtd, int chip) #endif } -#ifdef CFG_NAND_HW_ECC -#ifdef CFG_DAVINCI_BROKEN_ECC +#ifdef CONFIG_SYS_NAND_HW_ECC +#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC /* Linux-compatible ECC uses MTD defaults. */ /* These layouts are not compatible with Linux or RBL/UBL. */ -#ifdef CFG_NAND_LARGEPAGE +#ifdef CONFIG_SYS_NAND_LARGEPAGE static struct nand_ecclayout davinci_nand_ecclayout = { .eccbytes = 12, .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58}, @@ -103,7 +103,7 @@ static struct nand_ecclayout davinci_nand_ecclayout = { {.offset = 60, .length = 4} } }; -#elif defined(CFG_NAND_SMALLPAGE) +#elif defined(CONFIG_SYS_NAND_SMALLPAGE) static struct nand_ecclayout davinci_nand_ecclayout = { .eccbytes = 3, .eccpos = {0, 1, 2}, @@ -113,9 +113,9 @@ static struct nand_ecclayout davinci_nand_ecclayout = { } }; #else -#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!" +#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!" #endif -#endif /* CFG_DAVINCI_BROKEN_ECC */ +#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */ static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode) { @@ -154,7 +154,7 @@ static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region) static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { u_int32_t tmp; -#ifdef CFG_DAVINCI_BROKEN_ECC +#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC /* * This is not how you should read ECCs on large page Davinci devices. * The region parameter gets you ECCs for flash chips on different chip @@ -191,11 +191,11 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u *ecc_code++ = tmp; *ecc_code++ = tmp >> 8; *ecc_code++ = tmp >> 16; -#endif /* CFG_DAVINCI_BROKEN_ECC */ +#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */ return(0); } -#ifdef CFG_DAVINCI_BROKEN_ECC +#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf) { u_int32_t tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8); @@ -312,12 +312,12 @@ static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_in return(-1); } } -#endif /* CFG_DAVINCI_BROKEN_ECC */ +#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { struct nand_chip *this = mtd->priv; -#ifdef CFG_DAVINCI_BROKEN_ECC +#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC int block_count = 0, i, rc; block_count = (this->ecc.size/512); @@ -366,10 +366,10 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char * return -1; } } -#endif /* CFG_DAVINCI_BROKEN_ECC */ +#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */ return(0); } -#endif /* CFG_NAND_HW_ECC */ +#endif /* CONFIG_SYS_NAND_HW_ECC */ static int nand_davinci_dev_ready(struct mtd_info *mtd) { @@ -431,32 +431,32 @@ int board_nand_init(struct nand_chip *nand) nand->IO_ADDR_W = (void __iomem *)NAND_CE0DATA; nand->chip_delay = 0; nand->select_chip = nand_davinci_select_chip; -#ifdef CFG_NAND_USE_FLASH_BBT +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT nand->options = NAND_USE_FLASH_BBT; #endif -#ifdef CFG_NAND_HW_ECC +#ifdef CONFIG_SYS_NAND_HW_ECC nand->ecc.mode = NAND_ECC_HW; -#ifdef CFG_DAVINCI_BROKEN_ECC +#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC nand->ecc.layout = &davinci_nand_ecclayout; -#ifdef CFG_NAND_LARGEPAGE +#ifdef CONFIG_SYS_NAND_LARGEPAGE nand->ecc.size = 2048; nand->ecc.bytes = 12; -#elif defined(CFG_NAND_SMALLPAGE) +#elif defined(CONFIG_SYS_NAND_SMALLPAGE) nand->ecc.size = 512; nand->ecc.bytes = 3; #else -#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!" +#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!" #endif #else nand->ecc.size = 512; nand->ecc.bytes = 3; -#endif /* CFG_DAVINCI_BROKEN_ECC */ +#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */ nand->ecc.calculate = nand_davinci_calculate_ecc; nand->ecc.correct = nand_davinci_correct_data; nand->ecc.hwctl = nand_davinci_enable_hwecc; #else nand->ecc.mode = NAND_ECC_SOFT; -#endif /* CFG_NAND_HW_ECC */ +#endif /* CONFIG_SYS_NAND_HW_ECC */ /* Set address of hardware control function */ nand->cmd_ctrl = nand_davinci_hwcontrol; @@ -472,4 +472,4 @@ int board_nand_init(struct nand_chip *nand) #else #error "U-Boot legacy NAND support not available for DaVinci chips" #endif -#endif /* CFG_USE_NAND */ +#endif /* CONFIG_SYS_USE_NAND */ diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c index 6c670f0..773735a 100644 --- a/cpu/arm926ejs/davinci/timer.c +++ b/cpu/arm926ejs/davinci/timer.c @@ -54,9 +54,9 @@ typedef volatile struct { u_int32_t wdtcr; } davinci_timer; -davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE; +davinci_timer *timer = (davinci_timer *)CONFIG_SYS_TIMERBASE; -#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ) +#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) #define TIM_CLK_DIV 16 static ulong timestamp; @@ -117,7 +117,7 @@ void udelay(unsigned long usec) ulong endtime; signed long diff; - tmo = CFG_HZ_CLOCK / 1000; + tmo = CONFIG_SYS_HZ_CLOCK / 1000; tmo *= usec; tmo /= (1000 * TIM_CLK_DIV); @@ -144,5 +144,5 @@ unsigned long long get_ticks(void) */ ulong get_tbclk(void) { - return CFG_HZ; + return CONFIG_SYS_HZ; } diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c index a2a9133..49e74ab 100644 --- a/cpu/arm926ejs/omap/timer.c +++ b/cpu/arm926ejs/omap/timer.c @@ -41,7 +41,7 @@ #define TIMER_LOAD_VAL 0xffffffff /* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8)) +#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8)) static ulong timestamp; static ulong lastdec; @@ -51,9 +51,9 @@ int timer_init (void) int32_t val; /* Start the decrementer ticking down from 0xffffffff */ - *((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL; - val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT); - *((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val; + *((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL; + val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PVT << MPUTIM_PTV_BIT); + *((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val; /* init the timestamp and lastdec value */ reset_timer_masked(); @@ -87,10 +87,10 @@ void udelay (unsigned long usec) if(usec >= 1000){ /* if "big" number, spread normalization to seconds */ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ tmo /= 1000; /* finish normalize. */ }else{ /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; + tmo = usec * CONFIG_SYS_HZ; tmo /= (1000*1000); } @@ -140,10 +140,10 @@ void udelay_masked (unsigned long usec) if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ tmo /= 1000; /* finish normalize. */ } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; + tmo = usec * CONFIG_SYS_HZ; tmo /= (1000*1000); } @@ -172,6 +172,6 @@ ulong get_tbclk (void) { ulong tbclk; - tbclk = CFG_HZ; + tbclk = CONFIG_SYS_HZ; return tbclk; } diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S index a61fa18..ed4932a 100644 --- a/cpu/arm926ejs/start.S +++ b/cpu/arm926ejs/start.S @@ -165,8 +165,8 @@ copy_loop: /* Set up the stack */ stack_setup: ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ - sub r0, r0, #CFG_MALLOC_LEN /* malloc area */ - sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */ + sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ + sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ #ifdef CONFIG_USE_IRQ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ) #endif @@ -276,8 +276,8 @@ cpu_init_crit: stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 ldr r2, _armboot_start - sub r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) - sub r2, r2, #(CFG_GBL_DATA_SIZE+8) @ set base 2 words into abort stack + sub r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) + sub r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ set base 2 words into abort stack @ get values for "aborted" pc and cpsr (into parm regs) ldmia r2, {r2 - r3} add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack @@ -310,8 +310,8 @@ cpu_init_crit: .macro get_bad_stack ldr r13, _armboot_start @ setup our mode stack - sub r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN) - sub r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack + sub r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN) + sub r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack str lr, [r13] @ save caller lr in position 0 of saved stack mrs lr, spsr @ get the spsr diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c index f01f318..9ac867e 100755 --- a/cpu/arm926ejs/versatile/timer.c +++ b/cpu/arm926ejs/versatile/timer.c @@ -41,7 +41,7 @@ #define TIMER_LOAD_VAL 0xffffffff /* macro to read the 32 bit timer */ -#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+4)) +#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+4)) static ulong timestamp; static ulong lastdec; @@ -62,9 +62,9 @@ int timer_init (void) ulong tmr_ctrl_val; /* 1st disable the Timer */ - tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8); + tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); tmr_ctrl_val &= ~TIMER_ENABLE; - *(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val; + *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; /* * The Timer Control Register has one Undefined/Shouldn't Use Bit @@ -78,11 +78,11 @@ int timer_init (void) * Tmr Siz : 16 Bit Counter * Tmr in Wrapping Mode */ - tmr_ctrl_val = *(volatile ulong *)(CFG_TIMERBASE + 8); + tmr_ctrl_val = *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8); tmr_ctrl_val &= ~(TIMER_MODE_MSK | TIMER_INT_EN | TIMER_PRS_MSK | TIMER_SIZE_MSK | TIMER_ONE_SHT ); tmr_ctrl_val |= (TIMER_ENABLE | TIMER_PRS_8S); - *(volatile ulong *)(CFG_TIMERBASE + 8) = tmr_ctrl_val; + *(volatile ulong *)(CONFIG_SYS_TIMERBASE + 8) = tmr_ctrl_val; /* init the timestamp and lastdec value */ reset_timer_masked(); @@ -116,10 +116,10 @@ void udelay (unsigned long usec) if(usec >= 1000){ /* if "big" number, spread normalization to seconds */ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ tmo /= 1000; /* finish normalize. */ }else{ /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; + tmo = usec * CONFIG_SYS_HZ; tmo /= (1000*1000); } @@ -169,10 +169,10 @@ void udelay_masked (unsigned long usec) if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CFG_HZ; /* find number of "ticks" to wait to achieve target */ + tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ tmo /= 1000; /* finish normalize. */ } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CFG_HZ; + tmo = usec * CONFIG_SYS_HZ; tmo /= (1000*1000); } @@ -201,6 +201,6 @@ ulong get_tbclk (void) { ulong tbclk; - tbclk = CFG_HZ; + tbclk = CONFIG_SYS_HZ; return tbclk; } |