summaryrefslogtreecommitdiff
path: root/doc/README.mx28evk
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2013-05-03 18:08:00 (GMT)
committerStefano Babic <sbabic@denx.de>2013-06-26 15:39:57 (GMT)
commit54965b61360f888bd576b80fe8c4e3882616479f (patch)
tree9518041f01a241424288406a5ea3b2ff943432a3 /doc/README.mx28evk
parent7333eca5f4929be6ea75de86ba95f129f06ead62 (diff)
downloadu-boot-fsl-qoriq-54965b61360f888bd576b80fe8c4e3882616479f.tar.xz
README: mxs: Introduce README.mxs
Create a README.mxs file that contains instructions on how to use U-boot for both MX23 and MX28. As boot from NAND has only been tested on mx28, make it clear that it only applies to MX28. While at it, do some small cleanups for the sake of consistency: - Use "MX28" instead of "i.MX28" - Use "section" instead of "chapter" when referring to specific parts of the reference manual chapters. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'doc/README.mx28evk')
-rw-r--r--doc/README.mx28evk3
1 files changed, 1 insertions, 2 deletions
diff --git a/doc/README.mx28evk b/doc/README.mx28evk
index 76db474..524f3fc 100644
--- a/doc/README.mx28evk
+++ b/doc/README.mx28evk
@@ -41,7 +41,6 @@ Note: The mx28evk board does not come with a NAND flash populated from the
factory. It comes with an empty slot (U23), which allows the insertion of a
48-pin TSOP flash device.
-Follow the instructions from doc/README.mx28_common to generate a bootable SD
-card.
+Follow the instructions from doc/README.mxs to generate a bootable SD card.
Insert the SD card in slot 0, power up the board and U-boot will boot.