Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

* 'master' of git://git.denx.de/u-boot-mpc85xx:
  powerpc/p3060: Add SoC related support for P3060 platform
  powerpc/85xx: Add support for setting up RAID engine liodns on P5020
  powerpc/85xx: Refactor some defines out of corenet_ds.h
  fm-eth: Add ability for board code to disable a port
  powerpc/mpc8548: Add workaround for erratum NMG_LBC103
  powerpc/mpc8548: Add workaround for erratum NMG_DDR120
  powerpc/mpc85xxcds: Fix PCI speed
  powerpc/mpc8548cds: Fix booting message
  powerpc/p4080: Add support for secure boot flow
  powerpc/85xx: Add Secure Boot support on P1010RDB for NOR, NAND & SPIFLASH
  powerpc/85xx: Add PBL & SECUREBOOT support on P3041/P5020DS boards
  powerpc/p2041rdb: remove watch dog related codes
  powerpc/p2041rdb: updated description of cpld command
  powerpc/p2041rdb: add more ddr frequencies support
  powerpc/p2041rdb: set sysclk according to status of physical switch SW1
  powerpc/p2041rdb: update cpld reset command according to CPLD 2.0
  powerpc/mpc8349emds: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc83xx: Migrate from spd_sdram to unified DDR driver
  powerpc/mpc8xxx: Add DDR2 to unified DDR driver
  powerpc/mpc8xxx: Fix picos_to_mclk() and get_memory_clk_period_ps()
  powerpc/mpc8xxx: Add SPD EEPROM address for single controller 2 slots
  powerpc/mpc8xxx: Fix DDR code for empty first DIMM slot and enable DQS_en
  powerpc/85xx: Refactor P2041RDB to use common p_corenet files
  powerpc/85xx: refactor common P-Series CoreNet files for FSL boards
  powerpc/85xx: Enable CMD_REGINFO on corenet boards
  powerpc/85xx: p2041rdb - Remove unused 'execute' perm in TLB entries
  powerpc/85xx: Fix USB protocol definitions for P1020RDB
  powerpc/corenet_ds: Use separated speed tables for UDIMM and RDIMM
  powerpc/mpc8xxx: Move DDR RCW overriding to common code
  powerpc/mpc8xxx: Extend CWL table
  powerpc/85xx: Cleanup how SVR_MAJ() is defined on MPC8536
  powerpc/85xx: Cleanup extern in corenet_ds board code
  powerpc/p2041rdb: Add ethernet support on P2041RDB board
  powerpc/85xx: Add networking support to P1023RDS
  powerpc/hydra: Add ethernet support on P5020/P3041 DS boards
  powerpc/85xx: Add FMan ethernet support to P4080DS
  powerpc/85xx: Add support for FMan ethernet in Independent mode
  powerpc/mpc8548cds: Cleanup mpc8548cds.c
  powerpc/mp: add support for discontiguous cores
  powerpc/85xx: corenet_ds - Remove unused 'execute' perm in TLB entries
  fdt: Add new fdt_create_phandle helper
  fdt: Rename fdt_create_phandle to fdt_set_phandle
  powerpc/85xx: Fix compile warnings/errors if CONFIG_SYS_DPAA_FMAN isn't set
  fsl_ifc: Add the workaround for erratum IFC A-003399(enabled on P1010)
  powerpc/P1010: Add workaround for erratum P1010-A003549 (related to IFC)
  fsl_ifc: Add the workaround for erratum IFC-A002769 (enable on P1010)
  powerpc/85xx: Expanding the window of CCSRBAR in AS=1 from 4k to 1M
  powerpc/85xx: Add NAND/NAND_SPL support to P1010RDB
  nand: Freescale Integrated Flash Controller NAND support
  powerpc/85xx: Add basic support for P1010RDB
  powerpc/85xx: Add support for new P102x/P2020 RDB style boards
  powerpc/85xx: relocate CCSR before creating the initial RAM area
  powerpc/85xx: introduce and document CONFIG_SYS_CCSRBAR macros
  powerpc/85xx: Enable internal USB UTMI PHY on p204x/p3041/p50x0
  powerpc/85xx: Add ULPI and UTMI USB Phy support for P1010/P1014

1 files changed, 139 insertions, 0 deletions

diff --git a/drivers/net/fm/tgec_phy.c b/drivers/net/fm/tgec_phy.c
new file mode 100644
index 0000000..2d349ad
--- /dev/null
+++ b/drivers/net/fm/tgec_phy.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *	Andy Fleming <afleming@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_tgec.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns.  All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+			int regnum, u16 value)
+{
+	u32 mdio_ctl;
+	u32 stat_val;
+	struct tgec_mdio_controller *regs = bus->priv;
+
+	if (dev_addr == MDIO_DEVAD_NONE)
+		return 0;
+
+	/* Wait till the bus is free */
+	stat_val = MDIO_STAT_CLKDIV(100);
+	out_be32(&regs->mdio_stat, stat_val);
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Set the port and dev addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Set the register address */
+	out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Write the value to the register */
+	out_be32(&regs->mdio_data, MDIO_DATA(value));
+
+	/* Wait till the MDIO write is complete */
+	while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+		;
+
+	return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first.  All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+			int regnum)
+{
+	u32 mdio_ctl;
+	u32 stat_val;
+	struct tgec_mdio_controller *regs = bus->priv;
+
+	if (dev_addr == MDIO_DEVAD_NONE)
+		return 0xffff;
+
+	stat_val = MDIO_STAT_CLKDIV(100);
+	out_be32(&regs->mdio_stat, stat_val);
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Set the Port and Device Addrs */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Set the register address */
+	out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Initiate the read */
+	mdio_ctl |= MDIO_CTL_READ;
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Wait till the MDIO write is complete */
+	while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+		;
+
+	/* Return all Fs if nothing was there */
+	if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+		return 0xffff;
+
+	return in_be32(&regs->mdio_data) & 0xffff;
+}
+
+int tgec_mdio_reset(struct mii_dev *bus)
+{
+	return 0;
+}
+
+int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info)
+{
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate FM TGEC MDIO bus\n");
+		return -1;
+	}
+
+	bus->read = tgec_mdio_read;
+	bus->write = tgec_mdio_write;
+	bus->reset = tgec_mdio_reset;
+	sprintf(bus->name, info->name);
+
+	bus->priv = info->regs;
+
+	return mdio_register(bus);
+}