diff options
author | Tom Rini <trini@ti.com> | 2014-02-17 19:16:08 (GMT) |
---|---|---|
committer | Tom Rini <trini@ti.com> | 2014-02-17 19:16:08 (GMT) |
commit | 18c83588bc830dbad5a96ca19a85184da58f4d09 (patch) | |
tree | 6c6828f97876aa9974f29d2c8f5f248b8188a172 /drivers | |
parent | 22a240c32c1340183fce12867ae5f8736b92a638 (diff) | |
parent | b818d9ab8d96471c40ccbd4541a46dfa415eda73 (diff) | |
download | u-boot-fsl-qoriq-18c83588bc830dbad5a96ca19a85184da58f4d09.tar.xz |
Merge branch 'master' of git://git.denx.de/u-boot-mmc
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/mmc/dw_mmc.c | 2 | ||||
-rw-r--r-- | drivers/mmc/exynos_dw_mmc.c | 17 | ||||
-rw-r--r-- | drivers/mmc/mmc.c | 79 | ||||
-rw-r--r-- | drivers/mmc/zynq_sdhci.c | 3 |
4 files changed, 46 insertions, 55 deletions
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 4cec5aa..d45c15c 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -237,7 +237,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) * host->bus_hz should be set from user. */ if (host->get_mmc_clk) - sclk = host->get_mmc_clk(host->dev_index); + sclk = host->get_mmc_clk(host); else if (host->bus_hz) sclk = host->bus_hz; else { diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c index b3e5c5e..de8cdcc 100644 --- a/drivers/mmc/exynos_dw_mmc.c +++ b/drivers/mmc/exynos_dw_mmc.c @@ -29,9 +29,22 @@ static void exynos_dwmci_clksel(struct dwmci_host *host) dwmci_writel(host, DWMCI_CLKSEL, host->clksel_val); } -unsigned int exynos_dwmci_get_clk(int dev_index) +unsigned int exynos_dwmci_get_clk(struct dwmci_host *host) { - return get_mmc_clk(dev_index); + unsigned long sclk; + int8_t clk_div; + + /* + * Since SDCLKIN is divided inside controller by the DIVRATIO + * value set in the CLKSEL register, we need to use the same output + * clock value to calculate the CLKDIV value. + * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1) + */ + clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT) + & DWMCI_DIVRATIO_MASK) + 1; + sclk = get_mmc_clk(host->dev_index); + + return sclk / clk_div; } static void exynos_dwmci_board_init(struct dwmci_host *host) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index c6a1c23..8ab0bc9 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -430,7 +430,7 @@ int mmc_complete_op_cond(struct mmc *mmc) mmc->ocr = cmd.response[0]; mmc->high_capacity = ((mmc->ocr & OCR_HCS) == OCR_HCS); - mmc->rca = 0; + mmc->rca = 1; return 0; } @@ -1442,67 +1442,44 @@ int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, } /* - * This function shall form and send the commands to open / close the - * boot partition specified by user. - * - * Input Parameters: - * ack: 0x0 - No boot acknowledge sent (default) - * 0x1 - Boot acknowledge sent during boot operation - * part_num: User selects boot data that will be sent to master - * 0x0 - Device not boot enabled (default) - * 0x1 - Boot partition 1 enabled for boot - * 0x2 - Boot partition 2 enabled for boot - * access: User selects partitions to access - * 0x0 : No access to boot partition (default) - * 0x1 : R/W boot partition 1 - * 0x2 : R/W boot partition 2 - * 0x3 : R/W Replay Protected Memory Block (RPMB) + * Modify EXT_CSD[177] which is BOOT_BUS_WIDTH + * based on the passed in values for BOOT_BUS_WIDTH, RESET_BOOT_BUS_WIDTH + * and BOOT_MODE. * * Returns 0 on success. */ -int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +int mmc_set_boot_bus_width(struct mmc *mmc, u8 width, u8 reset, u8 mode) { int err; - struct mmc_cmd cmd; - /* Boot ack enable, boot partition enable , boot partition access */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; - - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_PART_CONF << 16) | - ((EXT_CSD_BOOT_ACK(ack) | - EXT_CSD_BOOT_PART_NUM(part_num) | - EXT_CSD_PARTITION_ACCESS(access)) << 8); + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_BUS_WIDTH, + EXT_CSD_BOOT_BUS_WIDTH_MODE(mode) | + EXT_CSD_BOOT_BUS_WIDTH_RESET(reset) | + EXT_CSD_BOOT_BUS_WIDTH_WIDTH(width)); - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - if (access) { - debug("mmc boot partition#%d open fail:Error1 = %d\n", - part_num, err); - } else { - debug("mmc boot partition#%d close fail:Error = %d\n", - part_num, err); - } + if (err) return err; - } + return 0; +} - if (access) { - /* 4bit transfer mode at booting time. */ - cmd.cmdidx = MMC_CMD_SWITCH; - cmd.resp_type = MMC_RSP_R1b; +/* + * Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly BOOT_CONFIG) + * based on the passed in values for BOOT_ACK, BOOT_PARTITION_ENABLE and + * PARTITION_ACCESS. + * + * Returns 0 on success. + */ +int mmc_set_part_conf(struct mmc *mmc, u8 ack, u8 part_num, u8 access) +{ + int err; - cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | - (EXT_CSD_BOOT_BUS_WIDTH << 16) | - ((1 << 0) << 8); + err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, + EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)); - err = mmc_send_cmd(mmc, &cmd, NULL); - if (err) { - debug("mmc boot partition#%d open fail:Error2 = %d\n", - part_num, err); - return err; - } - } + if (err) + return err; return 0; } #endif diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 610bef5..72a272f 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -23,7 +23,8 @@ int zynq_sdhci_init(u32 regbase) host->name = "zynq_sdhci"; host->ioaddr = (void *)regbase; - host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD; + host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD | + SDHCI_QUIRK_BROKEN_R1B; host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->host_caps = MMC_MODE_HC; |