powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

1 files changed, 0 insertions, 287 deletions

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
deleted file mode 100644
index 3f39a26..0000000
--- a/include/configs/katmai.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/************************************************************************
- * katmai.h - configuration for AMCC Katmai (440SPe)
- ***********************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_KATMAI			1	/* Board is Katmai	*/
-#define CONFIG_440			1	/* ... PPC440 family	*/
-#define CONFIG_440SPE			1	/* Specifc SPe support	*/
-#define CONFIG_440SPE_REVA		1	/* Support old Rev A.	*/
-#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
-#define CONFIG_SYS_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFFA0000
-
-/*
- * Enable this board for more than 2GB of SDRAM
- */
-#define	CONFIG_VERY_BIG_RAM
-
-/*
- * Include common defines/options for all AMCC eval boards
- */
-#define CONFIG_HOSTNAME		katmai
-#include "amcc-common.h"
-
-#undef  CONFIG_SHOW_BOOT_PROGRESS
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of FLASH	*/
-#define CONFIG_SYS_ISRAM_BASE		0x90000000	/* internal SRAM	*/
-
-#define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped PCI memory	*/
-#define CONFIG_SYS_PCI_BASE		0xd0000000	/* internal PCI regs	*/
-#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
-
-#define CONFIG_SYS_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
-#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000	/* smallest incr for PCIe port */
-#define CONFIG_SYS_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
-
-#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
-#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
-#define CONFIG_SYS_PCIE2_CFGBASE	0xc2000000
-#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
-#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
-#define CONFIG_SYS_PCIE2_XCFGBASE	0xc3002000
-
-/* base address of inbound PCIe window */
-#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000000000000ULL
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
-
-#define CONFIG_SYS_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_TEMP_STACK_OCM	1
-#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_CONS_INDEX	1	/* Use UART0			*/
-#undef CONFIG_SYS_EXT_SERIAL_CLOCK
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
-#define SPD_EEPROM_ADDRESS	{0x51, 0x52}	/* SPD i2c spd addresses*/
-#define CONFIG_DDR_ECC		1	/* with ECC support		*/
-#define CONFIG_DDR_RQDC_FIXED	0x80000038 /* optimal value found by GDA*/
-#undef  CONFIG_STRESS
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
-
-#define CONFIG_SYS_SPD_BUS_NUM		0	/* The I2C bus for SPD		*/
-
-#define IIC0_BOOTPROM_ADDR	0x50
-#define IIC0_ALT_BOOTPROM_ADDR	0x54
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	(0x50)
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-/* I2C bootstrap EEPROM */
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x50
-#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
-#define CONFIG_4xx_CONFIG_BLOCKSIZE		8
-
-/* I2C RTC */
-#define CONFIG_RTC_M41T11	1
-#define CONFIG_SYS_RTC_BUS_NUM		1	/* The I2C bus for RTC		*/
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR	1900	/* play along with linux	*/
-
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define	CONFIG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
-
-/*
- * Default environment variables
- */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_AMCC_DEF_ENV						\
-	CONFIG_AMCC_DEF_ENV_POWERPC					\
-	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
-	"kernel_addr=ff000000\0"					\
-	"fdt_addr=ff1e0000\0"						\
-	"ramdisk_addr=ff200000\0"					\
-	"pciconfighost=1\0"						\
-	"pcie_mode=RP:RP:RP\0"						\
-	""
-
-/*
- * Commands additional to the ones defined in amcc-common.h
- */
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_SDRAM
-
-#define	CONFIG_IBM_EMAC4_V4	1	/* 440SPe has this EMAC version	*/
-#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
-#define CONFIG_HAS_ETH0
-#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
-#define CONFIG_PHY_RESET_DELAY	1000
-#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-
-#define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
-#define CONFIG_SYS_MAX_FLASH_BANKS     1		    /* number of banks	    */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024		    /* sectors per device   */
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_ENV_SECT_SIZE	0x20000 /* size of one complete sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-/* General PCI */
-#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
-#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#define CONFIG_PCI_CONFIG_HOST_BRIDGE
-
-/* Board-specific PCI */
-#define CONFIG_SYS_PCI_TARGET_INIT		/* let board init pci target    */
-#undef	CONFIG_SYS_PCI_MASTER_INIT
-
-#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
-#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
-/* #define CONFIG_SYS_PCI_SUBSYS_ID	CONFIG_SYS_PCI_SUBSYS_DEVICEID */
-
-/*
- *  NETWORK Support (PCI):
- */
-/* Support for Intel 82557/82559/82559ER chips. */
-#define CONFIG_EEPRO100
-
-/*-----------------------------------------------------------------------
- * Xilinx System ACE support
- *----------------------------------------------------------------------*/
-#define CONFIG_SYSTEMACE	1	/* Enable SystemACE support	*/
-#define CONFIG_SYS_SYSTEMACE_WIDTH	16	/* Data bus width is 16		*/
-#define CONFIG_SYS_SYSTEMACE_BASE	CONFIG_SYS_ACE_BASE
-
-/*-----------------------------------------------------------------------
- * External Bus Controller (EBC) Setup
- *----------------------------------------------------------------------*/
-
-/* Memory Bank 0 (Flash) initialization					*/
-#define CONFIG_SYS_EBC_PB0AP		(EBC_BXAP_BME_DISABLED      |		\
-				 EBC_BXAP_TWT_ENCODE(7)     |		\
-				 EBC_BXAP_BCE_DISABLE       |		\
-				 EBC_BXAP_BCT_2TRANS        |		\
-				 EBC_BXAP_CSN_ENCODE(0)     |		\
-				 EBC_BXAP_OEN_ENCODE(0)     |		\
-				 EBC_BXAP_WBN_ENCODE(0)     |		\
-				 EBC_BXAP_WBF_ENCODE(0)     |		\
-				 EBC_BXAP_TH_ENCODE(0)      |		\
-				 EBC_BXAP_RE_DISABLED       |		\
-				 EBC_BXAP_SOR_DELAYED       |		\
-				 EBC_BXAP_BEM_WRITEONLY     |		\
-				 EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB0CR		(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |	\
-				 EBC_BXCR_BS_16MB                    |	\
-				 EBC_BXCR_BU_RW                      |	\
-				 EBC_BXCR_BW_16BIT)
-
-/* Memory Bank 1 (Xilinx System ACE controller) initialization		*/
-#define CONFIG_SYS_EBC_PB1AP		(EBC_BXAP_BME_DISABLED      |		\
-				 EBC_BXAP_TWT_ENCODE(4)     |		\
-				 EBC_BXAP_BCE_DISABLE       |		\
-				 EBC_BXAP_BCT_2TRANS        |		\
-				 EBC_BXAP_CSN_ENCODE(0)     |		\
-				 EBC_BXAP_OEN_ENCODE(0)     |		\
-				 EBC_BXAP_WBN_ENCODE(0)     |		\
-				 EBC_BXAP_WBF_ENCODE(0)     |		\
-				 EBC_BXAP_TH_ENCODE(0)      |		\
-				 EBC_BXAP_RE_DISABLED       |		\
-				 EBC_BXAP_SOR_NONDELAYED    |		\
-				 EBC_BXAP_BEM_WRITEONLY     |		\
-				 EBC_BXAP_PEN_DISABLED)
-#define CONFIG_SYS_EBC_PB1CR		(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE)  |	\
-				 EBC_BXCR_BS_1MB                    |	\
-				 EBC_BXCR_BU_RW                     |	\
-				 EBC_BXCR_BW_16BIT)
-
-/*-------------------------------------------------------------------------
- * Initialize EBC CONFIG -
- * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
- * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
- *-------------------------------------------------------------------------*/
-#define CONFIG_SYS_EBC_CFG		(EBC_CFG_LE_UNLOCK    |	\
-				 EBC_CFG_PTD_ENABLE   |	\
-				 EBC_CFG_RTC_16PERCLK | \
-				 EBC_CFG_ATC_PREVIOUS | \
-				 EBC_CFG_DTC_PREVIOUS | \
-				 EBC_CFG_CTC_PREVIOUS | \
-				 EBC_CFG_OEO_PREVIOUS | \
-				 EBC_CFG_EMC_DEFAULT  |	\
-				 EBC_CFG_PME_DISABLE  |	\
-				 EBC_CFG_PR_16)
-
-/*-----------------------------------------------------------------------
- * GPIO Setup
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_GPIO_PCIE_PRESENT0	17
-#define CONFIG_SYS_GPIO_PCIE_PRESENT1	21
-#define CONFIG_SYS_GPIO_PCIE_PRESENT2	23
-#define CONFIG_SYS_GPIO_RS232_FORCEOFF	30
-
-#define CONFIG_SYS_PFC0		(GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \
-				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \
-				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \
-				 GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF))
-#define CONFIG_SYS_GPIO_OR		GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
-#define CONFIG_SYS_GPIO_TCR		GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
-#define CONFIG_SYS_GPIO_ODR		0
-
-#endif	/* __CONFIG_H */