Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'

6 files changed, 341 insertions, 131 deletions

diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h
index 03893d7..38ad7f4 100644
--- a/include/configs/mx23_olinuxino.h
+++ b/include/configs/mx23_olinuxino.h
@@ -24,57 +24,57 @@
 /*
  * SoC configurations
  */
-#define	CONFIG_MX23				/* i.MX23 SoC */
-#define	CONFIG_MXS_GPIO				/* GPIO control */
-#define	CONFIG_SYS_HZ		1000		/* Ticks per second */
+#define CONFIG_MX23				/* i.MX23 SoC */
+#define CONFIG_MXS_GPIO				/* GPIO control */
+#define CONFIG_SYS_HZ		1000		/* Ticks per second */
 
-#define	CONFIG_MACH_TYPE	4105
+#define CONFIG_MACH_TYPE	4105
 
 #include <asm/arch/regs-base.h>
 
-#define	CONFIG_SYS_NO_FLASH
-#define	CONFIG_BOARD_EARLY_INIT_F
-#define	CONFIG_ARCH_MISC_INIT
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
 
 /*
  * SPL
  */
-#define	CONFIG_SPL
-#define	CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define	CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
-#define	CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define	CONFIG_SPL_LIBCOMMON_SUPPORT
-#define	CONFIG_SPL_LIBGENERIC_SUPPORT
-#define	CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
 
 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
-#define	CONFIG_DISPLAY_CPUINFO
-#define	CONFIG_DOS_PARTITION
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
 
-#define	CONFIG_CMD_CACHE
-#define	CONFIG_CMD_DHCP
-#define	CONFIG_CMD_EXT2
-#define	CONFIG_CMD_FAT
-#define	CONFIG_CMD_GPIO
-#define	CONFIG_CMD_LED
-#define	CONFIG_CMD_MMC
-#define	CONFIG_CMD_NET
-#define	CONFIG_CMD_USB
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_LED
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_USB
 
 /*
  * Memory configurations
  */
-#define	CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
-#define	PHYS_SDRAM_1			0x40000000	/* Base address */
-#define	PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
-#define	CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define	CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
-#define	CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
-#define	CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
-#define	CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
+#define PHYS_SDRAM_1			0x40000000	/* Base address */
+#define PHYS_SDRAM_1_SIZE		0x08000000	/* Max 128 MB RAM */
+#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
+#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 /* Point initial SP in SRAM so SPL can use it too. */
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
@@ -89,49 +89,49 @@
  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
  * binary. In case there was more of this mess, 0x100 bytes are skipped.
  */
-#define	CONFIG_SYS_TEXT_BASE		0x40000100
+#define CONFIG_SYS_TEXT_BASE		0x40000100
 
 /*
  * U-Boot general configurations
  */
-#define	CONFIG_SYS_LONGHELP
-#define	CONFIG_SYS_PROMPT	"=> "
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
-#define	CONFIG_SYS_PBSIZE	\
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT	"=> "
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print buffer size */
-#define	CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define	CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
-#define	CONFIG_VERSION_VARIABLE			/* U-BOOT version */
-#define	CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define	CONFIG_CMDLINE_EDITING			/* Command history etc */
-#define	CONFIG_SYS_HUSH_PARSER
+#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
+#define CONFIG_CMDLINE_EDITING			/* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
 
 /*
  * Serial Driver
  */
-#define	CONFIG_PL011_SERIAL
-#define	CONFIG_PL011_CLOCK		24000000
-#define	CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
-#define	CONFIG_CONS_INDEX		0
-#define	CONFIG_BAUDRATE			115200	/* Default baud rate */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK		24000000
+#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX		0
+#define CONFIG_BAUDRATE			115200	/* Default baud rate */
 
 /*
  * Status LED
  */
-#define	CONFIG_STATUS_LED
-#define	CONFIG_GPIO_LED
-#define	CONFIG_BOARD_SPECIFIC_LED
-#define	STATUS_LED_BOOT	0
-#define	STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
-#define	STATUS_LED_STATE	STATUS_LED_ON
-#define	STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
+#define CONFIG_STATUS_LED
+#define CONFIG_GPIO_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_BOOT	0
+#define STATUS_LED_BIT	MX23_PAD_SSP1_DETECT__GPIO_2_1
+#define STATUS_LED_STATE	STATUS_LED_ON
+#define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
 
 /*
  * MMC Driver
  */
-#ifdef	CONFIG_CMD_MMC
+#ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_GENERIC_MMC
@@ -144,41 +144,41 @@
 #define CONFIG_APBH_DMA
 
 /* USB */
-#ifdef	CONFIG_CMD_USB
-#define	CONFIG_USB_EHCI
-#define	CONFIG_USB_EHCI_MXS
-#define	CONFIG_EHCI_MXS_PORT0
-#define	CONFIG_USB_MAX_CONTROLLER_COUNT 1
-#define	CONFIG_EHCI_IS_TDI
-#define	CONFIG_USB_STORAGE
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
 #endif
 
 /* Ethernet */
-#ifdef	CONFIG_CMD_NET
-#define	CONFIG_USB_HOST_ETHER
-#define	CONFIG_USB_ETHER_SMSC95XX
+#ifdef CONFIG_CMD_NET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
 #endif
 
 /*
  * Boot Linux
  */
-#define	CONFIG_CMDLINE_TAG
-#define	CONFIG_SETUP_MEMORY_TAGS
-#define	CONFIG_BOOTDELAY	3
-#define	CONFIG_BOOTFILE		"uImage"
-#define	CONFIG_LOADADDR		0x42000000
-#define	CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define	CONFIG_OF_LIBFDT
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_LOADADDR		0x42000000
+#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
+#define CONFIG_OF_LIBFDT
 
 /*
  * Environment
  */
-#define	CONFIG_ENV_IS_IN_MMC
-#define	CONFIG_ENV_OVERWRITE
-#ifdef	CONFIG_ENV_IS_IN_MMC
-#define	CONFIG_ENV_OFFSET	(256 * 1024)
-#define	CONFIG_ENV_SIZE	(16 * 1024)
-#define	CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OVERWRITE
+#ifdef CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET	(256 * 1024)
+#define CONFIG_ENV_SIZE	(16 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV 0
 #endif
 
 /*
@@ -227,7 +227,7 @@
 		"else " \
 			"bootm; " \
 		"fi;\0" \
-	"netargs=setenv bootargs console=${console_mainline},${baudrate} " \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index c10e78b..4782f68 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -124,6 +124,10 @@
 #define CONFIG_SYS_I2C_BASE		IMX_I2C_BASE
 #define CONFIG_SYS_I2C_SPEED		100000
 
+/* RTC */
+#define CONFIG_RTC_IMXDI
+#define CONFIG_CMD_DATE
+
 /* Ethernet Configs */
 
 #define CONFIG_CMD_PING
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 0d918a1..d470b47 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -19,9 +19,7 @@
 #ifndef __MX28EVK_CONFIG_H__
 #define __MX28EVK_CONFIG_H__
 
-/*
- * SoC configurations
- */
+/* SoC configurations */
 #define CONFIG_MX28				/* i.MX28 SoC */
 
 #define CONFIG_MXS_GPIO			/* GPIO control */
@@ -35,9 +33,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_ARCH_MISC_INIT
 
-/*
- * SPL
- */
+/* SPL */
 #define CONFIG_SPL
 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
 #define CONFIG_SPL_START_S_PATH	"arch/arm/cpu/arm926ejs/mxs"
@@ -46,9 +42,7 @@
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
 
-/*
- * U-Boot Commands
- */
+/* U-Boot Commands */
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
@@ -68,11 +62,9 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NAND
 
-/*
- * Memory configurations
- */
+/* Memory configurations */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
@@ -98,9 +90,7 @@
 #define CONFIG_SYS_TEXT_BASE	0x40000100
 
 #define CONFIG_ENV_OVERWRITE
-/*
- * U-Boot general configurations
- */
+/* U-Boot general configurations */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_PROMPT	"MX28EVK U-Boot > "
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
@@ -115,24 +105,17 @@
 #define CONFIG_CMDLINE_EDITING		/* Command history etc */
 #define CONFIG_SYS_HUSH_PARSER
 
-/*
- * Serial Driver
- */
+/* Serial Driver */
 #define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
 #define CONFIG_CONS_INDEX		0
 #define CONFIG_BAUDRATE			115200	/* Default baud rate */
 
-/*
- * DMA
- */
+/* DMA */
 #define CONFIG_APBH_DMA
 
-/*
- * MMC Driver
- */
-#define CONFIG_ENV_IS_IN_MMC
+/* MMC Driver */
 #ifdef CONFIG_ENV_IS_IN_MMC
  #define CONFIG_ENV_OFFSET	(256 * 1024)
  #define CONFIG_ENV_SIZE	(16 * 1024)
@@ -146,19 +129,44 @@
 #define CONFIG_MXS_MMC
 #endif
 
-/*
- * NAND Driver
- */
+/* NAND Driver */
+#define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_MXS
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		0x60000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+/* Environment is in NAND */
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
+#define CONFIG_ENV_RANGE		(512 * 1024)
+#ifndef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET		0x300000
 #endif
+#define CONFIG_ENV_OFFSET_REDUND	\
+		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 
-/*
- * Ethernet on SOC (FEC)
- */
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT			\
+	"mtdparts=gpmi-nand:"			\
+		"3m(bootloader)ro,"		\
+		"512k(environment),"		\
+		"512k(redundant-environment),"	\
+		"4m(kernel),"			\
+		"128k(fdt),"			\
+		"8m(ramdisk),"			\
+		"-(filesystem)"
+#endif
+
+/* Ethernet on SOC (FEC) */
 #ifdef	CONFIG_CMD_NET
 #define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME	"FEC0"
@@ -168,16 +176,12 @@
 #define CONFIG_MX28_FEC_MAC_IN_OCOTP
 #endif
 
-/*
- * RTC
- */
+/* RTC */
 #ifdef	CONFIG_CMD_DATE
 #define	CONFIG_RTC_MXS
 #endif
 
-/*
- * USB
- */
+/* USB */
 #ifdef	CONFIG_CMD_USB
 #define	CONFIG_USB_EHCI
 #define	CONFIG_USB_EHCI_MXS
@@ -197,9 +201,7 @@
 #define CONFIG_SYS_I2C_SPEED	400000
 #endif
 
-/*
- * SPI
- */
+/* SPI */
 #ifdef CONFIG_CMD_SPI
 #define CONFIG_HARD_SPI
 #define CONFIG_MXS_SPI
@@ -232,9 +234,7 @@
 #endif
 #endif
 
-/*
- * Boot Linux
- */
+/* Boot Linux */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTDELAY	1
@@ -243,9 +243,7 @@
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 #define CONFIG_OF_LIBFDT
 
-/*
- * Extra Environments
- */
+/* Extra Environments */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"update_nand_full_filename=u-boot.nand\0" \
 	"update_nand_firmware_filename=u-boot.sb\0"	\
diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
index 9eda9ed..0965b8f 100644
--- a/include/configs/mx6qsabre_common.h
+++ b/include/configs/mx6qsabre_common.h
@@ -36,6 +36,7 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
@@ -75,6 +76,7 @@
 /* Command definition */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_BMODE
 #define CONFIG_CMD_BOOTZ
 #undef CONFIG_CMD_IMLS
 
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 5dc8255..6d4b837 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -216,7 +216,6 @@
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev};" \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
@@ -228,8 +227,6 @@
 		   "fi; " \
 	   "else run netboot; fi"
 
-#define CONFIG_ARP_TIMEOUT     200UL
-
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
new file mode 100644
index 0000000..120e3f6
--- /dev/null
+++ b/include/configs/wandboard.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Wandboard.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+#include <asm/sizes.h>
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define MACH_TYPE_WANDBOARD		4412
+#define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY		5
+
+#define CONFIG_SYS_MEMTEST_START	0x10000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
+#define CONFIG_LOADADDR			0x12000000
+#define CONFIG_SYS_TEXT_BASE		0x17800000
+
+/* MMC Configuration */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet Configuration */
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE			ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE		RGMII
+#define CONFIG_ETHPRIME			"FEC"
+#define CONFIG_FEC_MXC_PHYADDR		1
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#if defined(CONFIG_MX6DL)
+#define CONFIG_DEFAULT_FDT_FILE		"imx6dl-wandboard.dtb"
+#elif defined(CONFIG_MX6S)
+#define CONFIG_DEFAULT_FDT_FILE		"imx6s-wandboard.dtb"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"uimage=uImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_addr=0x11000000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=0\0" \
+	"mmcpart=2\0" \
+	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${uimage}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootm ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootm; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootm; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loaduimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT	       "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS	       16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_CMDLINE_EDITING
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE			(8 * 1024)
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+#endif			       /* __CONFIG_H * */