Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

2 files changed, 67 insertions, 12 deletions

diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h
index 056aea3..e73bc61 100644
--- a/include/configs/rcar-gen3-common.h
+++ b/include/configs/rcar-gen3-common.h
@@ -2,7 +2,7 @@
  * include/configs/rcar-gen3-common.h
  *	This file is R-Car Gen3 common configuration file.
  *
- * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
  *
  * SPDX-License-Identifier: GPL-2.0+
  */
@@ -17,7 +17,6 @@
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FDT
 
 #define CONFIG_REMAKE_ELF
 
@@ -34,7 +33,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_OF_LIBFDT
 
 #undef	CONFIG_SHOW_BOOT_PROGRESS
 
@@ -52,13 +50,34 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 38400 }
 
 /* MEMORY */
-#define CONFIG_SYS_TEXT_BASE		0x49000000
+#define CONFIG_SYS_TEXT_BASE		0x50000000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE + 0x7fff0)
 
-#define CONFIG_SYS_SDRAM_BASE		(0x48000000)
-#define CONFIG_SYS_SDRAM_SIZE		(1024u * 1024 * 1024 - 0x08000000)
-#define CONFIG_SYS_LOAD_ADDR		(0x48080000)
-#define CONFIG_NR_DRAM_BANKS		1
+#define DRAM_RSV_SIZE			0x08000000
+#if defined(CONFIG_R8A7795)
+#define CONFIG_NR_DRAM_BANKS		4
+#define PHYS_SDRAM_1			(0x40000000 + DRAM_RSV_SIZE)
+#define PHYS_SDRAM_1_SIZE		(0x40000000u - DRAM_RSV_SIZE)
+#define PHYS_SDRAM_2			0x500000000
+#define PHYS_SDRAM_2_SIZE		0x40000000u
+#define PHYS_SDRAM_3			0x600000000
+#define PHYS_SDRAM_3_SIZE		0x40000000u
+#define PHYS_SDRAM_4			0x700000000
+#define PHYS_SDRAM_4_SIZE		0x40000000u
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_1_SIZE
+#elif defined(CONFIG_R8A7796)
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			(0x40000000 + DRAM_RSV_SIZE)
+#define PHYS_SDRAM_1_SIZE		(0x80000000u - DRAM_RSV_SIZE)
+#define PHYS_SDRAM_2			0x0600000000
+#define PHYS_SDRAM_2_SIZE		0x80000000u
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_1_SIZE
+#endif
+#define CONFIG_SYS_LOAD_ADDR		0x48080000
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_MAX_MEM_MAPPED		CONFIG_SYS_SDRAM_SIZE
 
 #define CONFIG_SYS_MONITOR_BASE		0x00000000
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
@@ -81,7 +100,7 @@
 
 #define CONFIG_BOOTCOMMAND	\
 	"tftp 0x48080000 Image; " \
-	"tftp 0x48000000 Image-r8a7795-salvator-x.dtb; " \
+	"tftp 0x48000000 Image-"CONFIG_DEFAULT_FDT_FILE"; " \
 	"booti 0x48080000 - 0x48000000"
 
 #endif	/* __RCAR_GEN3_COMMON_H */
diff --git a/include/configs/salvator-x.h b/include/configs/salvator-x.h
index 81a7226..0ac3900 100644
--- a/include/configs/salvator-x.h
+++ b/include/configs/salvator-x.h
@@ -20,21 +20,27 @@
 #define CONFIG_SCIF_CONSOLE
 #define CONFIG_CONS_SCIF2
 #define CONFIG_CONS_INDEX	2
-#define CONFIG_SH_SCIF_CLK_FREQ	CONFIG_SYS_CLK_FREQ
+#define CONFIG_SH_SCIF_CLK_FREQ        CONFIG_S3D4_CLK_FREQ
 
 /* [A] Hyper Flash */
 /* use to RPC(SPI Multi I/O Bus Controller) */
-#define CONFIG_ENV_IS_NOWHERE
+
+/* Ethernet RAVB */
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
 
 /* Board Clock */
 /* XTAL_CLK : 33.33MHz */
 #define RCAR_XTAL_CLK		33333333u
 #define CONFIG_SYS_CLK_FREQ	RCAR_XTAL_CLK
 /* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
-/* CPclk 16.66MHz, S3D2 133.33MHz                          */
+/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz          */
 #define CONFIG_CP_CLK_FREQ	(CONFIG_SYS_CLK_FREQ / 2)
 #define CONFIG_PLL1_CLK_FREQ	(CONFIG_SYS_CLK_FREQ * 192 / 2)
 #define CONFIG_S3D2_CLK_FREQ	(266666666u/2)
+#define CONFIG_S3D4_CLK_FREQ	(266666666u/4)
 
 /* Generic Timer Definitions (use in assembler source) */
 #define COUNTER_FREQUENCY	0xFE502A	/* 16.66MHz from CPclk */
@@ -44,9 +50,39 @@
 #define GICD_BASE	0xF1010000
 #define GICC_BASE	0xF1020000
 
+/* i2c */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE		0x60
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS	1
+#define CONFIG_SYS_I2C_SH_SPEED0	400000
+#define CONFIG_SH_I2C_DATA_HIGH		4
+#define CONFIG_SH_I2C_DATA_LOW		5
+#define CONFIG_SH_I2C_CLOCK		10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR	0x30
+
+/* USB */
+#ifdef CONFIG_R8A7795
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
+#else
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+#endif
+
+/* SDHI */
+#define CONFIG_SH_SDHI_FREQ		200000000
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_OFFSET		(-CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MMC_ENV_DEV		1
+#define CONFIG_SYS_MMC_ENV_PART		2
+
 /* Module stop status bits */
 /* MFIS, SCIF1 */
 #define CONFIG_SMSTP2_ENA	0x00002040
+/* SCIF2 */
+#define CONFIG_SMSTP3_ENA	0x00000400
 /* INTC-AP, IRQC */
 #define CONFIG_SMSTP4_ENA	0x00000180