diff options
author | wdenk <wdenk> | 2003-06-19 23:40:20 (GMT) |
---|---|---|
committer | wdenk <wdenk> | 2003-06-19 23:40:20 (GMT) |
commit | 6dd652fa4d8591a32e2707a91f4582ed13011b17 (patch) | |
tree | 52d7c375a3a33d634e7c30908a75bf9616d92854 /tools/bddb/defs.php | |
parent | 52f52c1494eedaeacccad6e2331f4f638b48f5ab (diff) | |
download | u-boot-fsl-qoriq-6dd652fa4d8591a32e2707a91f4582ed13011b17.tar.xz |
Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
"common/main.c" can use the "reset_cmd_timeout()" function before
entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
slightly different. see include/configs/hymod.h for an example
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
config.mk to allow board configurations to override the GNU
linker script, selected via the LDSCRIPT, make variable, and to
give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
o correctly extends the timeout depending on the size of all
queued messages for both transmit and receive
o will not continue with receive if transmit times out
o ensures that the error callback is done for all queued tx
and rx messages
o correctly detects both tx and rx timeouts, only delivers one to
the callback, and does not overwrite an earlier error
o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
technically correct
- many Hymod board changes
Diffstat (limited to 'tools/bddb/defs.php')
-rw-r--r-- | tools/bddb/defs.php | 12 |
1 files changed, 9 insertions, 3 deletions
diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php index 0393dbd..9361419 100644 --- a/tools/bddb/defs.php +++ b/tools/bddb/defs.php @@ -58,8 +58,8 @@ $zbt_nbits = array(0,19,20,21,22); // Xilinx attributes - $xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E'); - $xlxspd_vals = array('','6','7','8'); + $xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000'); + $xlxspd_vals = array('','6','7','8','4','5'); $xlxtmp_vals = array('','COM','IND'); $xlxgrd_vals = array('','NORMAL','ENGSAMP'); @@ -449,7 +449,13 @@ // generate a (possibly not unique) random vendor ethernet address // (setting bit 6 in the ethernet address - motorola wise i.e. bit 0 // is the most significant bit - means it is not an assigned ethernet - // address). Also, make sure it is NOT a multicast ethernet address. + // address - it is a "locally administered" address). Also, make sure + // it is NOT a multicast ethernet address (by setting bit 7 to 0). + // e.g. the first byte of all ethernet addresses generated here will + // have 2 in the bottom two bits (incidentally, these are the first + // two bits transmitted on the wire, since the octets in ethernet + // addresses are transmitted LSB first). + function gen_eth_addr($serno) { $ethaddr_high = (mt_rand(0, 65535) & 0xfeff) | 0x0200; |