summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile6
-rw-r--r--board/freescale/mpc8641hpcn/mpc8641hpcn.c3
-rw-r--r--board/imx31_phycore/imx31_phycore.c57
-rw-r--r--common/cmd_nvedit.c6
-rw-r--r--common/lcd.c101
-rw-r--r--cpu/i386/Makefile3
-rw-r--r--cpu/i386/sc520/Makefile52
-rw-r--r--cpu/i386/sc520/sc520.c (renamed from cpu/i386/sc520.c)0
-rw-r--r--cpu/i386/sc520/sc520_asm.S (renamed from cpu/i386/sc520_asm.S)3
-rw-r--r--drivers/gpio/Makefile3
-rw-r--r--drivers/gpio/mx31_gpio.c73
-rw-r--r--drivers/net/smc911x.c457
-rw-r--r--drivers/net/smc911x.h494
-rw-r--r--drivers/net/tsec.c30
-rw-r--r--drivers/spi/mxc_spi.c93
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/mx3fb.c856
-rw-r--r--drivers/video/s6e63d6.c76
-rw-r--r--examples/.gitignore1
-rw-r--r--examples/Makefile7
-rw-r--r--examples/smc911x_eeprom.c381
-rw-r--r--include/asm-arm/arch-mx31/mx31-regs.h16
-rw-r--r--include/asm-arm/arch-mx31/mx31.h20
-rw-r--r--include/asm-ppc/config.h2
-rw-r--r--include/common.h1
-rw-r--r--include/configs/imx31_phycore.h23
-rw-r--r--include/lcd.h21
-rw-r--r--include/s6e63d6.h37
-rw-r--r--lib_ppc/board.c5
-rw-r--r--net/eth.c11
-rw-r--r--net/net.c134
31 files changed, 2388 insertions, 586 deletions
diff --git a/Makefile b/Makefile
index 3d0b986..e8b4c13 100644
--- a/Makefile
+++ b/Makefile
@@ -3029,8 +3029,12 @@ apollon_config : unconfig
imx31_litekit_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 imx31_litekit NULL mx31
+imx31_phycore_eet_config \
imx31_phycore_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm1136 imx31_phycore NULL mx31
+ @if [ -n "$(findstring _eet_,$@)" ]; then \
+ echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \
+ fi
+ @$(MKCONFIG) -a imx31_phycore arm arm1136 imx31_phycore NULL mx31
mx31ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 49718da..c94fc3f 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -46,6 +46,9 @@ int checkboard(void)
"System Version: 0x%02x, FPGA Version: 0x%02x\n",
in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
in8(PIXIS_BASE + PIXIS_PVER));
+#ifdef CONFIG_PHYS_64BIT
+ printf (" 36-bit physical address map\n");
+#endif
return 0;
}
diff --git a/board/imx31_phycore/imx31_phycore.c b/board/imx31_phycore/imx31_phycore.c
index ae93444..93a5c40 100644
--- a/board/imx31_phycore/imx31_phycore.c
+++ b/board/imx31_phycore/imx31_phycore.c
@@ -23,6 +23,7 @@
#include <common.h>
+#include <s6e63d6.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
@@ -66,6 +67,62 @@ int board_init (void)
return 0;
}
+#ifdef BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_S6E63D6
+ struct s6e63d6 data = {
+ /*
+ * See comment in mxc_spi.c::decode_cs() for .cs field format.
+ * We use GPIO 57 as a chipselect for the S6E63D6 and chipselect
+ * 2 of the SPI controller #1, since it is unused.
+ */
+ .cs = 2 | (57 << 8),
+ .bus = 0,
+ .id = 0,
+ };
+ int ret;
+
+ /* SPI1 */
+ mx31_gpio_mux(MUX_CSPI1_SCLK__CSPI1_CLK);
+ mx31_gpio_mux(MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B);
+ mx31_gpio_mux(MUX_CSPI1_MOSI__CSPI1_MOSI);
+ mx31_gpio_mux(MUX_CSPI1_MISO__CSPI1_MISO);
+ mx31_gpio_mux(MUX_CSPI1_SS0__CSPI1_SS0_B);
+ mx31_gpio_mux(MUX_CSPI1_SS1__CSPI1_SS1_B);
+ mx31_gpio_mux(MUX_CSPI1_SS2__CSPI1_SS2_B);
+
+ /* start SPI1 clock */
+ __REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 2);
+
+ /* GPIO 57 */
+ /* sw_mux_ctl_key_col4_key_col5_key_col6_key_col7 */
+ mx31_gpio_mux(IOMUX_MODE(0x63, MUX_CTL_GPIO));
+
+ /* SPI1 CS2 is free */
+ ret = s6e63d6_init(&data);
+ if (ret)
+ return ret;
+
+ /*
+ * This is a "magic" sequence to initialise a C0240QGLA / C0283QGLC
+ * OLED display connected to a S6E63D6 SPI display controller in the
+ * 18 bit RGB mode
+ */
+ s6e63d6_index(&data, 2);
+ s6e63d6_param(&data, 0x0182);
+ s6e63d6_index(&data, 3);
+ s6e63d6_param(&data, 0x8130);
+ s6e63d6_index(&data, 0x10);
+ s6e63d6_param(&data, 0x0000);
+ s6e63d6_index(&data, 5);
+ s6e63d6_param(&data, 0x0001);
+ s6e63d6_index(&data, 0x22);
+#endif
+ return 0;
+}
+#endif
+
int checkboard (void)
{
printf("Board: Phytec phyCore i.MX31\n");
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 02b18ec..68c673e 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -75,7 +75,12 @@ DECLARE_GLOBAL_DATA_PTR;
static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0]))
+static int env_id = 1;
+int get_env_id (void)
+{
+ return env_id;
+}
/************************************************************************
* Command interface: print one or all environment variables
*/
@@ -160,6 +165,7 @@ int _do_setenv (int flag, int argc, char *argv[])
return 1;
}
+ env_id++;
/*
* search if variable with this name already exists
*/
diff --git a/common/lcd.c b/common/lcd.c
index 2bcdba2..4155170 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -84,7 +84,7 @@ extern void lcd_enable (void);
static void *lcd_logo (void);
-#if LCD_BPP == LCD_COLOR8
+#if (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
extern void lcd_setcolreg (ushort regno,
ushort red, ushort green, ushort blue);
#endif
@@ -622,19 +622,18 @@ void bitmap_plot (int x, int y)
*/
int lcd_display_bitmap(ulong bmp_image, int x, int y)
{
-#ifdef CONFIG_ATMEL_LCD
- uint *cmap;
-#elif !defined(CONFIG_MCC200)
- ushort *cmap;
+#if !defined(CONFIG_MCC200)
+ ushort *cmap = NULL;
#endif
+ ushort *cmap_base = NULL;
ushort i, j;
uchar *fb;
bmp_image_t *bmp=(bmp_image_t *)bmp_image;
uchar *bmap;
ushort padded_line;
- unsigned long width, height;
+ unsigned long width, height, byte_width;
unsigned long pwidth = panel_info.vl_col;
- unsigned colors,bpix;
+ unsigned colors, bpix, bmp_bpix;
unsigned long compression;
#if defined(CONFIG_PXA250)
struct pxafb_info *fbi = &panel_info.pxa;
@@ -647,22 +646,24 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
(bmp->header.signature[1]=='M'))) {
printf ("Error: no valid bmp image at %lx\n", bmp_image);
return 1;
-}
+ }
width = le32_to_cpu (bmp->header.width);
height = le32_to_cpu (bmp->header.height);
- colors = 1<<le16_to_cpu (bmp->header.bit_count);
+ bmp_bpix = le16_to_cpu(bmp->header.bit_count);
+ colors = 1 << bmp_bpix;
compression = le32_to_cpu (bmp->header.compression);
bpix = NBITS(panel_info.vl_bpix);
- if ((bpix != 1) && (bpix != 8)) {
- printf ("Error: %d bit/pixel mode not supported by U-Boot\n",
- bpix);
+ if ((bpix != 1) && (bpix != 8) && (bpix != 16)) {
+ printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
+ bpix, bmp_bpix);
return 1;
}
- if (bpix != le16_to_cpu(bmp->header.bit_count)) {
+ /* We support displaying 8bpp BMPs on 16bpp LCDs */
+ if (bpix != bmp_bpix && (bmp_bpix != 8 || bpix != 16)) {
printf ("Error: %d bit/pixel mode, but BMP has %d bit/pixel\n",
bpix,
le16_to_cpu(bmp->header.bit_count));
@@ -674,17 +675,17 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
#if !defined(CONFIG_MCC200)
/* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
- if (bpix==8) {
+ if (bmp_bpix == 8) {
#if defined(CONFIG_PXA250)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
-#elif defined(CONFIG_ATMEL_LCD)
- cmap = (uint *) (panel_info.mmio + ATMEL_LCDC_LUT(0));
-#else
-# error "Don't know location of color map"
+#elif !defined(CONFIG_ATMEL_LCD)
+ cmap = panel_info.cmap;
#endif
+ cmap_base = cmap;
+
/* Set color map */
for (i=0; i<colors; ++i) {
bmp_color_table_entry_t cte = bmp->color_table[i];
@@ -698,10 +699,10 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
#else
*cmap = colreg;
#endif
-#if defined(CONFIG_PXA250)
- cmap++;
-#elif defined(CONFIG_MPC823)
+#if defined(CONFIG_MPC823)
cmap--;
+#else
+ cmap++;
#endif
#else /* CONFIG_ATMEL_LCD */
lcd_setcolreg(i, cte.red, cte.green, cte.blue);
@@ -738,17 +739,59 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
bmap = (uchar *)bmp + le32_to_cpu (bmp->header.data_offset);
fb = (uchar *) (lcd_base +
(y + height - 1) * lcd_line_length + x);
- for (i = 0; i < height; ++i) {
- WATCHDOG_RESET();
- for (j = 0; j < width ; j++)
+
+ switch (bmp_bpix) {
+ case 1: /* pass through */
+ case 8:
+ if (bpix != 16)
+ byte_width = width;
+ else
+ byte_width = width * 2;
+
+ for (i = 0; i < height; ++i) {
+ WATCHDOG_RESET();
+ for (j = 0; j < width; j++) {
+ if (bpix != 16) {
#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD)
- *(fb++) = *(bmap++);
+ *(fb++) = *(bmap++);
#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
- *(fb++)=255-*(bmap++);
+ *(fb++) = 255 - *(bmap++);
#endif
- bmap += (width - padded_line);
- fb -= (width + lcd_line_length);
- }
+ } else {
+ *(uint16_t *)fb = cmap_base[*(bmap++)];
+ fb += sizeof(uint16_t) / sizeof(*fb);
+ }
+ }
+ bmap += (width - padded_line);
+ fb -= (byte_width + lcd_line_length);
+ }
+ break;
+
+#if defined(CONFIG_BMP_16BPP)
+ case 16:
+ for (i = 0; i < height; ++i) {
+ WATCHDOG_RESET();
+ for (j = 0; j < width; j++) {
+#if defined(CONFIG_ATMEL_LCD_BGR555)
+ *(fb++) = ((bmap[0] & 0x1f) << 2) |
+ (bmap[1] & 0x03);
+ *(fb++) = (bmap[0] & 0xe0) |
+ ((bmap[1] & 0x7c) >> 2);
+ bmap += 2;
+#else
+ *(fb++) = *(bmap++);
+ *(fb++) = *(bmap++);
+#endif
+ }
+ bmap += (padded_line - width) * 2;
+ fb -= (width * 2 + lcd_line_length);
+ }
+ break;
+#endif /* CONFIG_BMP_16BPP */
+
+ default:
+ break;
+ };
return (0);
}
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index f20675a..761c4f6 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -29,8 +29,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o start16.o resetvec.o
-COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
-SOBJS = sc520_asm.o
+COBJS = serial.o interrupts.o cpu.o timer.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/i386/sc520/Makefile b/cpu/i386/sc520/Makefile
new file mode 100644
index 0000000..ddfec23
--- /dev/null
+++ b/cpu/i386/sc520/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2008
+# Graeme Russ, graeme.russ@gmail.com.
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2002
+# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB := $(obj)lib$(SOC).a
+
+COBJS-$(CONFIG_SYS_SC520) += sc520.o
+SOBJS-$(CONFIG_SYS_SC520) += sc520_asm.o
+
+SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+######################################################################### \ No newline at end of file
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520/sc520.c
index b958f8d..b958f8d 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520/sc520.c
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520/sc520_asm.S
index 59ed2b8..2042d9b 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520/sc520_asm.S
@@ -105,7 +105,6 @@
*/
#include <config.h>
-#ifdef CONFIG_SC520
.section .text
.equ DRCCTL, 0x0fffef010 /* DRAM control register */
@@ -580,5 +579,3 @@ set_ecc:
out:
movl %ebx, %eax
jmp *%ebp
-
-#endif /* CONFIG_SC520 */
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index dd618ed..f10144f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,7 +25,8 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libgpio.a
-COBJS-$(CONFIG_PCA953X) += pca953x.o
+COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o
+COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c
new file mode 100644
index 0000000..737aafa
--- /dev/null
+++ b/drivers/gpio/mx31_gpio.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+
+/* GPIO port description */
+static unsigned long gpio_ports[] = {
+ [0] = GPIO1_BASE,
+ [1] = GPIO2_BASE,
+ [2] = GPIO3_BASE,
+};
+
+int mx31_gpio_direction(unsigned int gpio, enum mx31_gpio_direction direction)
+{
+ unsigned int port = gpio >> 5;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return 1;
+
+ gpio &= 0x1f;
+
+ l = __REG(gpio_ports[port] + GPIO_GDIR);
+ switch (direction) {
+ case MX31_GPIO_DIRECTION_OUT:
+ l |= 1 << gpio;
+ break;
+ case MX31_GPIO_DIRECTION_IN:
+ l &= ~(1 << gpio);
+ }
+ __REG(gpio_ports[port] + GPIO_GDIR) = l;
+
+ return 0;
+}
+
+void mx31_gpio_set(unsigned int gpio, unsigned int value)
+{
+ unsigned int port = gpio >> 5;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return;
+
+ gpio &= 0x1f;
+
+ l = __REG(gpio_ports[port] + GPIO_DR);
+ if (value)
+ l |= 1 << gpio;
+ else
+ l &= ~(1 << gpio);
+ __REG(gpio_ports[port] + GPIO_DR) = l;
+}
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 9cc4fce..1ded8f0 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -27,38 +27,7 @@
#include <net.h>
#include <miiphy.h>
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
- defined (CONFIG_DRIVER_SMC911X_16_BIT)
-#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
- CONFIG_DRIVER_SMC911X_16_BIT shall be set"
-#endif
-
-#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
-static inline u32 __smc911x_reg_read(u32 addr)
-{
- return *(volatile u32*)addr;
-}
-u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
-
-static inline void __smc911x_reg_write(u32 addr, u32 val)
-{
- *(volatile u32*)addr = val;
-}
-void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
-#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
-static inline u32 smc911x_reg_read(u32 addr)
-{
- volatile u16 *addr_16 = (u16 *)addr;
- return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
-}
-static inline void smc911x_reg_write(u32 addr, u32 val)
-{
- *(volatile u16*)addr = (u16)val;
- *(volatile u16*)(addr + 2) = (u16)(val >> 16);
-}
-#else
-#error "SMC911X: undefined bus width"
-#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+#include "smc911x.h"
u32 pkt_data_pull(u32 addr) \
__attribute__ ((weak, alias ("smc911x_reg_read")));
@@ -67,370 +36,6 @@ void pkt_data_push(u32 addr, u32 val) \
#define mdelay(n) udelay((n)*1000)
-/* Below are the register offsets and bit definitions
- * of the Lan911x memory space
- */
-#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00)
-
-#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20)
-#define TX_CMD_A_INT_ON_COMP 0x80000000
-#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
-#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
-#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000
-#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000
-#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000
-#define TX_CMD_A_INT_FIRST_SEG 0x00002000
-#define TX_CMD_A_INT_LAST_SEG 0x00001000
-#define TX_CMD_A_BUF_SIZE 0x000007FF
-#define TX_CMD_B_PKT_TAG 0xFFFF0000
-#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000
-#define TX_CMD_B_DISABLE_PADDING 0x00001000
-#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF
-
-#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40)
-#define RX_STS_PKT_LEN 0x3FFF0000
-#define RX_STS_ES 0x00008000
-#define RX_STS_BCST 0x00002000
-#define RX_STS_LEN_ERR 0x00001000
-#define RX_STS_RUNT_ERR 0x00000800
-#define RX_STS_MCAST 0x00000400
-#define RX_STS_TOO_LONG 0x00000080
-#define RX_STS_COLL 0x00000040
-#define RX_STS_ETH_TYPE 0x00000020
-#define RX_STS_WDOG_TMT 0x00000010
-#define RX_STS_MII_ERR 0x00000008
-#define RX_STS_DRIBBLING 0x00000004
-#define RX_STS_CRC_ERR 0x00000002
-#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44)
-#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48)
-#define TX_STS_TAG 0xFFFF0000
-#define TX_STS_ES 0x00008000
-#define TX_STS_LOC 0x00000800
-#define TX_STS_NO_CARR 0x00000400
-#define TX_STS_LATE_COLL 0x00000200
-#define TX_STS_MANY_COLL 0x00000100
-#define TX_STS_COLL_CNT 0x00000078
-#define TX_STS_MANY_DEFER 0x00000004
-#define TX_STS_UNDERRUN 0x00000002
-#define TX_STS_DEFERRED 0x00000001
-#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C)
-#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50)
-#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */
-#define ID_REV_REV_ID 0x0000FFFF /* RO */
-
-#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54)
-#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */
-#define INT_CFG_INT_DEAS_CLR 0x00004000
-#define INT_CFG_INT_DEAS_STS 0x00002000
-#define INT_CFG_IRQ_INT 0x00001000 /* RO */
-#define INT_CFG_IRQ_EN 0x00000100 /* R/W */
-#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */
-#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */
-
-#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58)
-#define INT_STS_SW_INT 0x80000000 /* R/WC */
-#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */
-#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */
-#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */
-#define INT_STS_RXDF_INT 0x00400000 /* R/WC */
-#define INT_STS_TX_IOC 0x00200000 /* R/WC */
-#define INT_STS_RXD_INT 0x00100000 /* R/WC */
-#define INT_STS_GPT_INT 0x00080000 /* R/WC */
-#define INT_STS_PHY_INT 0x00040000 /* RO */
-#define INT_STS_PME_INT 0x00020000 /* R/WC */
-#define INT_STS_TXSO 0x00010000 /* R/WC */
-#define INT_STS_RWT 0x00008000 /* R/WC */
-#define INT_STS_RXE 0x00004000 /* R/WC */
-#define INT_STS_TXE 0x00002000 /* R/WC */
-/*#define INT_STS_ERX 0x00001000*/ /* R/WC */
-#define INT_STS_TDFU 0x00000800 /* R/WC */
-#define INT_STS_TDFO 0x00000400 /* R/WC */
-#define INT_STS_TDFA 0x00000200 /* R/WC */
-#define INT_STS_TSFF 0x00000100 /* R/WC */
-#define INT_STS_TSFL 0x00000080 /* R/WC */
-/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */
-#define INT_STS_RDFO 0x00000040 /* R/WC */
-#define INT_STS_RDFL 0x00000020 /* R/WC */
-#define INT_STS_RSFF 0x00000010 /* R/WC */
-#define INT_STS_RSFL 0x00000008 /* R/WC */
-#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */
-#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */
-#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */
-#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C)
-#define INT_EN_SW_INT_EN 0x80000000 /* R/W */
-#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */
-#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */
-#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */
-/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */
-#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */
-#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */
-#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */
-#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */
-#define INT_EN_PME_INT_EN 0x00020000 /* R/W */
-#define INT_EN_TXSO_EN 0x00010000 /* R/W */
-#define INT_EN_RWT_EN 0x00008000 /* R/W */
-#define INT_EN_RXE_EN 0x00004000 /* R/W */
-#define INT_EN_TXE_EN 0x00002000 /* R/W */
-/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */
-#define INT_EN_TDFU_EN 0x00000800 /* R/W */
-#define INT_EN_TDFO_EN 0x00000400 /* R/W */
-#define INT_EN_TDFA_EN 0x00000200 /* R/W */
-#define INT_EN_TSFF_EN 0x00000100 /* R/W */
-#define INT_EN_TSFL_EN 0x00000080 /* R/W */
-/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */
-#define INT_EN_RDFO_EN 0x00000040 /* R/W */
-#define INT_EN_RDFL_EN 0x00000020 /* R/W */
-#define INT_EN_RSFF_EN 0x00000010 /* R/W */
-#define INT_EN_RSFL_EN 0x00000008 /* R/W */
-#define INT_EN_GPIO2_INT 0x00000004 /* R/W */
-#define INT_EN_GPIO1_INT 0x00000002 /* R/W */
-#define INT_EN_GPIO0_INT 0x00000001 /* R/W */
-
-#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64)
-#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68)
-#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */
-#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */
-#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */
-#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */
-
-#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C)
-#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */
-#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */
-#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */
-#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */
-#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */
-#define RX_CFG_RX_DUMP 0x00008000 /* R/W */
-#define RX_CFG_RXDOFF 0x00001F00 /* R/W */
-/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */
-
-#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70)
-/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */
-/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */
-#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */
-#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */
-#define TX_CFG_TXSAO 0x00000004 /* R/W */
-#define TX_CFG_TX_ON 0x00000002 /* R/W */
-#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */
-
-#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74)
-#define HW_CFG_TTM 0x00200000 /* R/W */
-#define HW_CFG_SF 0x00100000 /* R/W */
-#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
-#define HW_CFG_TR 0x00003000 /* R/W */
-#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
-#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
-#define HW_CFG_SMI_SEL 0x00000010 /* R/W */
-#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */
-#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */
-#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */
-#define HW_CFG_SRST_TO 0x00000002 /* RO */
-#define HW_CFG_SRST 0x00000001 /* Self Clearing */
-
-#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78)
-#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
-#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
-
-#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C)
-#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
-#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
-
-#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80)
-#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */
-#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */
-
-#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84)
-#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */
-#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */
-#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */
-#define PMT_CTRL_ED_EN 0x00000100 /* R/W */
-#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */
-#define PMT_CTRL_WUPS 0x00000030 /* R/WC */
-#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */
-#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */
-#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */
-#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */
-#define PMT_CTRL_PME_IND 0x00000008 /* R/W */
-#define PMT_CTRL_PME_POL 0x00000004 /* R/W */
-#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */
-#define PMT_CTRL_READY 0x00000001 /* RO */
-
-#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88)
-#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */
-#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */
-#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */
-#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */
-#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */
-#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */
-#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */
-#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */
-#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */
-#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */
-#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */
-#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */
-#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */
-#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */
-#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */
-#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */
-#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */
-#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */
-
-#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C)
-#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */
-#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */
-
-#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90)
-#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */
-
-#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98)
-#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C)
-#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0)
-#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4)
-#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */
-#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */
-#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */
-
-#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8)
-#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC)
-#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */
-#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */
-#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */
-#define AFC_CFG_FCMULT 0x00000008 /* R/W */
-#define AFC_CFG_FCBRD 0x00000004 /* R/W */
-#define AFC_CFG_FCADD 0x00000002 /* R/W */
-#define AFC_CFG_FCANY 0x00000001 /* R/W */
-
-#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0)
-#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */
-#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */
-#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */
-#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */
-#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */
-#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */
-#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */
-#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */
-#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */
-#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */
-#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */
-#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */
-#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */
-
-#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4)
-#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */
-/* end of LAN register offsets and bit definitions */
-
-/* MAC Control and Status registers */
-#define MAC_CR 0x01 /* R/W */
-
-/* MAC_CR - MAC Control Register */
-#define MAC_CR_RXALL 0x80000000
-/* TODO: delete this bit? It is not described in the data sheet. */
-#define MAC_CR_HBDIS 0x10000000
-#define MAC_CR_RCVOWN 0x00800000
-#define MAC_CR_LOOPBK 0x00200000
-#define MAC_CR_FDPX 0x00100000
-#define MAC_CR_MCPAS 0x00080000
-#define MAC_CR_PRMS 0x00040000
-#define MAC_CR_INVFILT 0x00020000
-#define MAC_CR_PASSBAD 0x00010000
-#define MAC_CR_HFILT 0x00008000
-#define MAC_CR_HPFILT 0x00002000
-#define MAC_CR_LCOLL 0x00001000
-#define MAC_CR_BCAST 0x00000800
-#define MAC_CR_DISRTY 0x00000400
-#define MAC_CR_PADSTR 0x00000100
-#define MAC_CR_BOLMT_MASK 0x000000C0
-#define MAC_CR_DFCHK 0x00000020
-#define MAC_CR_TXEN 0x00000008
-#define MAC_CR_RXEN 0x00000004
-
-#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */
-#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */
-#define HASHH 0x04 /* R/W */
-#define HASHL 0x05 /* R/W */
-
-#define MII_ACC 0x06 /* R/W */
-#define MII_ACC_PHY_ADDR 0x0000F800
-#define MII_ACC_MIIRINDA 0x000007C0
-#define MII_ACC_MII_WRITE 0x00000002
-#define MII_ACC_MII_BUSY 0x00000001
-
-#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */
-
-#define FLOW 0x08 /* R/W */
-#define FLOW_FCPT 0xFFFF0000
-#define FLOW_FCPASS 0x00000004
-#define FLOW_FCEN 0x00000002
-#define FLOW_FCBSY 0x00000001
-
-#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */
-#define VLAN1_VTI1 0x0000ffff
-
-#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */
-#define VLAN2_VTI2 0x0000ffff
-
-#define WUFF 0x0B /* WO */
-
-#define WUCSR 0x0C /* R/W */
-#define WUCSR_GUE 0x00000200
-#define WUCSR_WUFR 0x00000040
-#define WUCSR_MPR 0x00000020
-#define WUCSR_WAKE_EN 0x00000004
-#define WUCSR_MPEN 0x00000002
-
-/* Chip ID values */
-#define CHIP_9115 0x115
-#define CHIP_9116 0x116
-#define CHIP_9117 0x117
-#define CHIP_9118 0x118
-#define CHIP_9211 0x9211
-#define CHIP_9215 0x115a
-#define CHIP_9216 0x116a
-#define CHIP_9217 0x117a
-#define CHIP_9218 0x118a
-
-struct chip_id {
- u16 id;
- char *name;
-};
-
-static const struct chip_id chip_ids[] = {
- { CHIP_9115, "LAN9115" },
- { CHIP_9116, "LAN9116" },
- { CHIP_9117, "LAN9117" },
- { CHIP_9118, "LAN9118" },
- { CHIP_9211, "LAN9211" },
- { CHIP_9215, "LAN9215" },
- { CHIP_9216, "LAN9216" },
- { CHIP_9217, "LAN9217" },
- { CHIP_9218, "LAN9218" },
- { 0, NULL },
-};
-
-#define DRIVERNAME "smc911x"
-
-u32 smc911x_get_mac_csr(u8 reg)
-{
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
- ;
- smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
- ;
-
- return smc911x_reg_read(MAC_CSR_DATA);
-}
-
-void smc911x_set_mac_csr(u8 reg, u32 data)
-{
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
- ;
- smc911x_reg_write(MAC_CSR_DATA, data);
- smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
- while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
- ;
-}
-
static int smx911x_handle_mac_address(bd_t *bd)
{
unsigned long addrh, addrl;
@@ -541,48 +146,6 @@ err_out:
printf(DRIVERNAME ": autonegotiation timed out\n");
}
-static void smc911x_reset(void)
-{
- int timeout;
-
- /* Take out of PM setting first */
- if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
- /* Write to the bytetest will take out of powerdown */
- smc911x_reg_write(BYTE_TEST, 0x0);
-
- timeout = 10;
-
- while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
- udelay(10);
- if (!timeout) {
- printf(DRIVERNAME
- ": timeout waiting for PM restore\n");
- return;
- }
- }
-
- /* Disable interrupts */
- smc911x_reg_write(INT_EN, 0);
-
- smc911x_reg_write(HW_CFG, HW_CFG_SRST);
-
- timeout = 1000;
- while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
- udelay(10);
-
- if (!timeout) {
- printf(DRIVERNAME ": reset timeout\n");
- return;
- }
-
- /* Reset the FIFO level and flow control settings */
- smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
- smc911x_reg_write(AFC_CFG, 0x0050287F);
-
- /* Set to LED outputs */
- smc911x_reg_write(GPIO_CFG, 0x70070000);
-}
-
static void smc911x_enable(void)
{
/* Enable TX */
@@ -601,26 +164,10 @@ static void smc911x_enable(void)
int eth_init(bd_t *bd)
{
- unsigned long val, i;
-
printf(DRIVERNAME ": initializing\n");
- val = smc911x_reg_read(BYTE_TEST);
- if (val != 0x87654321) {
- printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
+ if (smc911x_detect_chip())
goto err_out;
- }
-
- val = smc911x_reg_read(ID_REV) >> 16;
- for (i = 0; chip_ids[i].id != 0; i++) {
- if (chip_ids[i].id == val) break;
- }
- if (!chip_ids[i].id) {
- printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
- goto err_out;
- }
-
- printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
smc911x_reset();
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
new file mode 100644
index 0000000..80d2ce0
--- /dev/null
+++ b/drivers/net/smc911x.h
@@ -0,0 +1,494 @@
+/*
+ * SMSC LAN9[12]1[567] Network driver
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SMC911X_H_
+#define _SMC911X_H_
+
+#include <linux/types.h>
+
+#if defined (CONFIG_DRIVER_SMC911X_32_BIT) && \
+ defined (CONFIG_DRIVER_SMC911X_16_BIT)
+#error "SMC911X: Only one of CONFIG_DRIVER_SMC911X_32_BIT and \
+ CONFIG_DRIVER_SMC911X_16_BIT shall be set"
+#endif
+
+#if defined (CONFIG_DRIVER_SMC911X_32_BIT)
+static inline u32 __smc911x_reg_read(u32 addr)
+{
+ return *(volatile u32*)addr;
+}
+u32 smc911x_reg_read(u32 addr) __attribute__((weak, alias("__smc911x_reg_read")));
+
+static inline void __smc911x_reg_write(u32 addr, u32 val)
+{
+ *(volatile u32*)addr = val;
+}
+void smc911x_reg_write(u32 addr, u32 val) __attribute__((weak, alias("__smc911x_reg_write")));
+#elif defined (CONFIG_DRIVER_SMC911X_16_BIT)
+static inline u32 smc911x_reg_read(u32 addr)
+{
+ volatile u16 *addr_16 = (u16 *)addr;
+ return ((*addr_16 & 0x0000ffff) | (*(addr_16 + 1) << 16));
+}
+static inline void smc911x_reg_write(u32 addr, u32 val)
+{
+ *(volatile u16*)addr = (u16)val;
+ *(volatile u16*)(addr + 2) = (u16)(val >> 16);
+}
+#else
+#error "SMC911X: undefined bus width"
+#endif /* CONFIG_DRIVER_SMC911X_16_BIT */
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x00)
+
+#define TX_DATA_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_CMD_A_INT_ON_COMP 0x80000000
+#define TX_CMD_A_INT_BUF_END_ALGN 0x03000000
+#define TX_CMD_A_INT_4_BYTE_ALGN 0x00000000
+#define TX_CMD_A_INT_16_BYTE_ALGN 0x01000000
+#define TX_CMD_A_INT_32_BYTE_ALGN 0x02000000
+#define TX_CMD_A_INT_DATA_OFFSET 0x001F0000
+#define TX_CMD_A_INT_FIRST_SEG 0x00002000
+#define TX_CMD_A_INT_LAST_SEG 0x00001000
+#define TX_CMD_A_BUF_SIZE 0x000007FF
+#define TX_CMD_B_PKT_TAG 0xFFFF0000
+#define TX_CMD_B_ADD_CRC_DISABLE 0x00002000
+#define TX_CMD_B_DISABLE_PADDING 0x00001000
+#define TX_CMD_B_PKT_BYTE_LENGTH 0x000007FF
+
+#define RX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STS_PKT_LEN 0x3FFF0000
+#define RX_STS_ES 0x00008000
+#define RX_STS_BCST 0x00002000
+#define RX_STS_LEN_ERR 0x00001000
+#define RX_STS_RUNT_ERR 0x00000800
+#define RX_STS_MCAST 0x00000400
+#define RX_STS_TOO_LONG 0x00000080
+#define RX_STS_COLL 0x00000040
+#define RX_STS_ETH_TYPE 0x00000020
+#define RX_STS_WDOG_TMT 0x00000010
+#define RX_STS_MII_ERR 0x00000008
+#define RX_STS_DRIBBLING 0x00000004
+#define RX_STS_CRC_ERR 0x00000002
+#define RX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define TX_STATUS_FIFO (CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define TX_STS_TAG 0xFFFF0000
+#define TX_STS_ES 0x00008000
+#define TX_STS_LOC 0x00000800
+#define TX_STS_NO_CARR 0x00000400
+#define TX_STS_LATE_COLL 0x00000200
+#define TX_STS_MANY_COLL 0x00000100
+#define TX_STS_COLL_CNT 0x00000078
+#define TX_STS_MANY_DEFER 0x00000004
+#define TX_STS_UNDERRUN 0x00000002
+#define TX_STS_DEFERRED 0x00000001
+#define TX_STATUS_FIFO_PEEK (CONFIG_DRIVER_SMC911X_BASE + 0x4C)
+#define ID_REV (CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define ID_REV_CHIP_ID 0xFFFF0000 /* RO */
+#define ID_REV_REV_ID 0x0000FFFF /* RO */
+
+#define INT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG_INT_DEAS 0xFF000000 /* R/W */
+#define INT_CFG_INT_DEAS_CLR 0x00004000
+#define INT_CFG_INT_DEAS_STS 0x00002000
+#define INT_CFG_IRQ_INT 0x00001000 /* RO */
+#define INT_CFG_IRQ_EN 0x00000100 /* R/W */
+#define INT_CFG_IRQ_POL 0x00000010 /* R/W Not Affected by SW Reset */
+#define INT_CFG_IRQ_TYPE 0x00000001 /* R/W Not Affected by SW Reset */
+
+#define INT_STS (CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS_SW_INT 0x80000000 /* R/WC */
+#define INT_STS_TXSTOP_INT 0x02000000 /* R/WC */
+#define INT_STS_RXSTOP_INT 0x01000000 /* R/WC */
+#define INT_STS_RXDFH_INT 0x00800000 /* R/WC */
+#define INT_STS_RXDF_INT 0x00400000 /* R/WC */
+#define INT_STS_TX_IOC 0x00200000 /* R/WC */
+#define INT_STS_RXD_INT 0x00100000 /* R/WC */
+#define INT_STS_GPT_INT 0x00080000 /* R/WC */
+#define INT_STS_PHY_INT 0x00040000 /* RO */
+#define INT_STS_PME_INT 0x00020000 /* R/WC */
+#define INT_STS_TXSO 0x00010000 /* R/WC */
+#define INT_STS_RWT 0x00008000 /* R/WC */
+#define INT_STS_RXE 0x00004000 /* R/WC */
+#define INT_STS_TXE 0x00002000 /* R/WC */
+/*#define INT_STS_ERX 0x00001000*/ /* R/WC */
+#define INT_STS_TDFU 0x00000800 /* R/WC */
+#define INT_STS_TDFO 0x00000400 /* R/WC */
+#define INT_STS_TDFA 0x00000200 /* R/WC */
+#define INT_STS_TSFF 0x00000100 /* R/WC */
+#define INT_STS_TSFL 0x00000080 /* R/WC */
+/*#define INT_STS_RXDF 0x00000040*/ /* R/WC */
+#define INT_STS_RDFO 0x00000040 /* R/WC */
+#define INT_STS_RDFL 0x00000020 /* R/WC */
+#define INT_STS_RSFF 0x00000010 /* R/WC */
+#define INT_STS_RSFL 0x00000008 /* R/WC */
+#define INT_STS_GPIO2_INT 0x00000004 /* R/WC */
+#define INT_STS_GPIO1_INT 0x00000002 /* R/WC */
+#define INT_STS_GPIO0_INT 0x00000001 /* R/WC */
+#define INT_EN (CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN_SW_INT_EN 0x80000000 /* R/W */
+#define INT_EN_TXSTOP_INT_EN 0x02000000 /* R/W */
+#define INT_EN_RXSTOP_INT_EN 0x01000000 /* R/W */
+#define INT_EN_RXDFH_INT_EN 0x00800000 /* R/W */
+/*#define INT_EN_RXDF_INT_EN 0x00400000*/ /* R/W */
+#define INT_EN_TIOC_INT_EN 0x00200000 /* R/W */
+#define INT_EN_RXD_INT_EN 0x00100000 /* R/W */
+#define INT_EN_GPT_INT_EN 0x00080000 /* R/W */
+#define INT_EN_PHY_INT_EN 0x00040000 /* R/W */
+#define INT_EN_PME_INT_EN 0x00020000 /* R/W */
+#define INT_EN_TXSO_EN 0x00010000 /* R/W */
+#define INT_EN_RWT_EN 0x00008000 /* R/W */
+#define INT_EN_RXE_EN 0x00004000 /* R/W */
+#define INT_EN_TXE_EN 0x00002000 /* R/W */
+/*#define INT_EN_ERX_EN 0x00001000*/ /* R/W */
+#define INT_EN_TDFU_EN 0x00000800 /* R/W */
+#define INT_EN_TDFO_EN 0x00000400 /* R/W */
+#define INT_EN_TDFA_EN 0x00000200 /* R/W */
+#define INT_EN_TSFF_EN 0x00000100 /* R/W */
+#define INT_EN_TSFL_EN 0x00000080 /* R/W */
+/*#define INT_EN_RXDF_EN 0x00000040*/ /* R/W */
+#define INT_EN_RDFO_EN 0x00000040 /* R/W */
+#define INT_EN_RDFL_EN 0x00000020 /* R/W */
+#define INT_EN_RSFF_EN 0x00000010 /* R/W */
+#define INT_EN_RSFL_EN 0x00000008 /* R/W */
+#define INT_EN_GPIO2_INT 0x00000004 /* R/W */
+#define INT_EN_GPIO1_INT 0x00000002 /* R/W */
+#define INT_EN_GPIO0_INT 0x00000001 /* R/W */
+
+#define BYTE_TEST (CONFIG_DRIVER_SMC911X_BASE + 0x64)
+#define FIFO_INT (CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define FIFO_INT_TX_AVAIL_LEVEL 0xFF000000 /* R/W */
+#define FIFO_INT_TX_STS_LEVEL 0x00FF0000 /* R/W */
+#define FIFO_INT_RX_AVAIL_LEVEL 0x0000FF00 /* R/W */
+#define FIFO_INT_RX_STS_LEVEL 0x000000FF /* R/W */
+
+#define RX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG_RX_END_ALGN 0xC0000000 /* R/W */
+#define RX_CFG_RX_END_ALGN4 0x00000000 /* R/W */
+#define RX_CFG_RX_END_ALGN16 0x40000000 /* R/W */
+#define RX_CFG_RX_END_ALGN32 0x80000000 /* R/W */
+#define RX_CFG_RX_DMA_CNT 0x0FFF0000 /* R/W */
+#define RX_CFG_RX_DUMP 0x00008000 /* R/W */
+#define RX_CFG_RXDOFF 0x00001F00 /* R/W */
+/*#define RX_CFG_RXBAD 0x00000001*/ /* R/W */
+
+#define TX_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x70)
+/*#define TX_CFG_TX_DMA_LVL 0xE0000000*/ /* R/W */
+/*#define TX_CFG_TX_DMA_CNT 0x0FFF0000*/ /* R/W Self Clearing */
+#define TX_CFG_TXS_DUMP 0x00008000 /* Self Clearing */
+#define TX_CFG_TXD_DUMP 0x00004000 /* Self Clearing */
+#define TX_CFG_TXSAO 0x00000004 /* R/W */
+#define TX_CFG_TX_ON 0x00000002 /* R/W */
+#define TX_CFG_STOP_TX 0x00000001 /* Self Clearing */
+
+#define HW_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG_TTM 0x00200000 /* R/W */
+#define HW_CFG_SF 0x00100000 /* R/W */
+#define HW_CFG_TX_FIF_SZ 0x000F0000 /* R/W */
+#define HW_CFG_TR 0x00003000 /* R/W */
+#define HW_CFG_PHY_CLK_SEL 0x00000060 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_INT_PHY 0x00000000 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_EXT_PHY 0x00000020 /* R/W */
+#define HW_CFG_PHY_CLK_SEL_CLK_DIS 0x00000040 /* R/W */
+#define HW_CFG_SMI_SEL 0x00000010 /* R/W */
+#define HW_CFG_EXT_PHY_DET 0x00000008 /* RO */
+#define HW_CFG_EXT_PHY_EN 0x00000004 /* R/W */
+#define HW_CFG_32_16_BIT_MODE 0x00000004 /* RO */
+#define HW_CFG_SRST_TO 0x00000002 /* RO */
+#define HW_CFG_SRST 0x00000001 /* Self Clearing */
+
+#define RX_DP_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL_RX_FFWD 0x80000000 /* R/W */
+#define RX_DP_CTRL_FFWD_BUSY 0x80000000 /* RO */
+
+#define RX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF_RXSUSED 0x00FF0000 /* RO */
+#define RX_FIFO_INF_RXDUSED 0x0000FFFF /* RO */
+
+#define TX_FIFO_INF (CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF_TSUSED 0x00FF0000 /* RO */
+#define TX_FIFO_INF_TDFREE 0x0000FFFF /* RO */
+
+#define PMT_CTRL (CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL_PM_MODE 0x00003000 /* Self Clearing */
+#define PMT_CTRL_PHY_RST 0x00000400 /* Self Clearing */
+#define PMT_CTRL_WOL_EN 0x00000200 /* R/W */
+#define PMT_CTRL_ED_EN 0x00000100 /* R/W */
+#define PMT_CTRL_PME_TYPE 0x00000040 /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_WUPS 0x00000030 /* R/WC */
+#define PMT_CTRL_WUPS_NOWAKE 0x00000000 /* R/WC */
+#define PMT_CTRL_WUPS_ED 0x00000010 /* R/WC */
+#define PMT_CTRL_WUPS_WOL 0x00000020 /* R/WC */
+#define PMT_CTRL_WUPS_MULTI 0x00000030 /* R/WC */
+#define PMT_CTRL_PME_IND 0x00000008 /* R/W */
+#define PMT_CTRL_PME_POL 0x00000004 /* R/W */
+#define PMT_CTRL_PME_EN 0x00000002 /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_READY 0x00000001 /* RO */
+
+#define GPIO_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG_LED3_EN 0x40000000 /* R/W */
+#define GPIO_CFG_LED2_EN 0x20000000 /* R/W */
+#define GPIO_CFG_LED1_EN 0x10000000 /* R/W */
+#define GPIO_CFG_GPIO2_INT_POL 0x04000000 /* R/W */
+#define GPIO_CFG_GPIO1_INT_POL 0x02000000 /* R/W */
+#define GPIO_CFG_GPIO0_INT_POL 0x01000000 /* R/W */
+#define GPIO_CFG_EEPR_EN 0x00700000 /* R/W */
+#define GPIO_CFG_GPIOBUF2 0x00040000 /* R/W */
+#define GPIO_CFG_GPIOBUF1 0x00020000 /* R/W */
+#define GPIO_CFG_GPIOBUF0 0x00010000 /* R/W */
+#define GPIO_CFG_GPIODIR2 0x00000400 /* R/W */
+#define GPIO_CFG_GPIODIR1 0x00000200 /* R/W */
+#define GPIO_CFG_GPIODIR0 0x00000100 /* R/W */
+#define GPIO_CFG_GPIOD4 0x00000010 /* R/W */
+#define GPIO_CFG_GPIOD3 0x00000008 /* R/W */
+#define GPIO_CFG_GPIOD2 0x00000004 /* R/W */
+#define GPIO_CFG_GPIOD1 0x00000002 /* R/W */
+#define GPIO_CFG_GPIOD0 0x00000001 /* R/W */
+
+#define GPT_CFG (CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG_TIMER_EN 0x20000000 /* R/W */
+#define GPT_CFG_GPT_LOAD 0x0000FFFF /* R/W */
+
+#define GPT_CNT (CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT_GPT_CNT 0x0000FFFF /* RO */
+
+#define ENDIAN (CONFIG_DRIVER_SMC911X_BASE + 0x98)
+#define FREE_RUN (CONFIG_DRIVER_SMC911X_BASE + 0x9C)
+#define RX_DROP (CONFIG_DRIVER_SMC911X_BASE + 0xA0)
+#define MAC_CSR_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define MAC_CSR_CMD_CSR_BUSY 0x80000000 /* Self Clearing */
+#define MAC_CSR_CMD_R_NOT_W 0x40000000 /* R/W */
+#define MAC_CSR_CMD_CSR_ADDR 0x000000FF /* R/W */
+
+#define MAC_CSR_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xA8)
+#define AFC_CFG (CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define AFC_CFG_AFC_HI 0x00FF0000 /* R/W */
+#define AFC_CFG_AFC_LO 0x0000FF00 /* R/W */
+#define AFC_CFG_BACK_DUR 0x000000F0 /* R/W */
+#define AFC_CFG_FCMULT 0x00000008 /* R/W */
+#define AFC_CFG_FCBRD 0x00000004 /* R/W */
+#define AFC_CFG_FCADD 0x00000002 /* R/W */
+#define AFC_CFG_FCANY 0x00000001 /* R/W */
+
+#define E2P_CMD (CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD_EPC_BUSY 0x80000000 /* Self Clearing */
+#define E2P_CMD_EPC_CMD 0x70000000 /* R/W */
+#define E2P_CMD_EPC_CMD_READ 0x00000000 /* R/W */
+#define E2P_CMD_EPC_CMD_EWDS 0x10000000 /* R/W */
+#define E2P_CMD_EPC_CMD_EWEN 0x20000000 /* R/W */
+#define E2P_CMD_EPC_CMD_WRITE 0x30000000 /* R/W */
+#define E2P_CMD_EPC_CMD_WRAL 0x40000000 /* R/W */
+#define E2P_CMD_EPC_CMD_ERASE 0x50000000 /* R/W */
+#define E2P_CMD_EPC_CMD_ERAL 0x60000000 /* R/W */
+#define E2P_CMD_EPC_CMD_RELOAD 0x70000000 /* R/W */
+#define E2P_CMD_EPC_TIMEOUT 0x00000200 /* RO */
+#define E2P_CMD_MAC_ADDR_LOADED 0x00000100 /* RO */
+#define E2P_CMD_EPC_ADDR 0x000000FF /* R/W */
+
+#define E2P_DATA (CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA_EEPROM_DATA 0x000000FF /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/* MAC Control and Status registers */
+#define MAC_CR 0x01 /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL 0x80000000
+/* TODO: delete this bit? It is not described in the data sheet. */
+#define MAC_CR_HBDIS 0x10000000
+#define MAC_CR_RCVOWN 0x00800000
+#define MAC_CR_LOOPBK 0x00200000
+#define MAC_CR_FDPX 0x00100000
+#define MAC_CR_MCPAS 0x00080000
+#define MAC_CR_PRMS 0x00040000
+#define MAC_CR_INVFILT 0x00020000
+#define MAC_CR_PASSBAD 0x00010000
+#define MAC_CR_HFILT 0x00008000
+#define MAC_CR_HPFILT 0x00002000
+#define MAC_CR_LCOLL 0x00001000
+#define MAC_CR_BCAST 0x00000800
+#define MAC_CR_DISRTY 0x00000400
+#define MAC_CR_PADSTR 0x00000100
+#define MAC_CR_BOLMT_MASK 0x000000C0
+#define MAC_CR_DFCHK 0x00000020
+#define MAC_CR_TXEN 0x00000008
+#define MAC_CR_RXEN 0x00000004
+
+#define ADDRH 0x02 /* R/W mask 0x0000FFFFUL */
+#define ADDRL 0x03 /* R/W mask 0xFFFFFFFFUL */
+#define HASHH 0x04 /* R/W */
+#define HASHL 0x05 /* R/W */
+
+#define MII_ACC 0x06 /* R/W */
+#define MII_ACC_PHY_ADDR 0x0000F800
+#define MII_ACC_MIIRINDA 0x000007C0
+#define MII_ACC_MII_WRITE 0x00000002
+#define MII_ACC_MII_BUSY 0x00000001
+
+#define MII_DATA 0x07 /* R/W mask 0x0000FFFFUL */
+
+#define FLOW 0x08 /* R/W */
+#define FLOW_FCPT 0xFFFF0000
+#define FLOW_FCPASS 0x00000004
+#define FLOW_FCEN 0x00000002
+#define FLOW_FCBSY 0x00000001
+
+#define VLAN1 0x09 /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1 0x0000ffff
+
+#define VLAN2 0x0A /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2 0x0000ffff
+
+#define WUFF 0x0B /* WO */
+
+#define WUCSR 0x0C /* R/W */
+#define WUCSR_GUE 0x00000200
+#define WUCSR_WUFR 0x00000040
+#define WUCSR_MPR 0x00000020
+#define WUCSR_WAKE_EN 0x00000004
+#define WUCSR_MPEN 0x00000002
+
+/* Chip ID values */
+#define CHIP_9115 0x115
+#define CHIP_9116 0x116
+#define CHIP_9117 0x117
+#define CHIP_9118 0x118
+#define CHIP_9211 0x9211
+#define CHIP_9215 0x115a
+#define CHIP_9216 0x116a
+#define CHIP_9217 0x117a
+#define CHIP_9218 0x118a
+
+struct chip_id {
+ u16 id;
+ char *name;
+};
+
+static const struct chip_id chip_ids[] = {
+ { CHIP_9115, "LAN9115" },
+ { CHIP_9116, "LAN9116" },
+ { CHIP_9117, "LAN9117" },
+ { CHIP_9118, "LAN9118" },
+ { CHIP_9211, "LAN9211" },
+ { CHIP_9215, "LAN9215" },
+ { CHIP_9216, "LAN9216" },
+ { CHIP_9217, "LAN9217" },
+ { CHIP_9218, "LAN9218" },
+ { 0, NULL },
+};
+
+
+#define DRIVERNAME "smc911x"
+
+static u32 smc911x_get_mac_csr(u8 reg)
+{
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ ;
+ smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg);
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ ;
+
+ return smc911x_reg_read(MAC_CSR_DATA);
+}
+
+static void smc911x_set_mac_csr(u8 reg, u32 data)
+{
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ ;
+ smc911x_reg_write(MAC_CSR_DATA, data);
+ smc911x_reg_write(MAC_CSR_CMD, MAC_CSR_CMD_CSR_BUSY | reg);
+ while (smc911x_reg_read(MAC_CSR_CMD) & MAC_CSR_CMD_CSR_BUSY)
+ ;
+}
+
+static int smc911x_detect_chip(void)
+{
+ unsigned long val, i;
+
+ val = smc911x_reg_read(BYTE_TEST);
+ if (val != 0x87654321) {
+ printf(DRIVERNAME ": Invalid chip endian 0x%08lx\n", val);
+ return -1;
+ }
+
+ val = smc911x_reg_read(ID_REV) >> 16;
+ for (i = 0; chip_ids[i].id != 0; i++) {
+ if (chip_ids[i].id == val) break;
+ }
+ if (!chip_ids[i].id) {
+ printf(DRIVERNAME ": Unknown chip ID %04lx\n", val);
+ return -1;
+ }
+
+ printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+
+ return 0;
+}
+
+static void smc911x_reset(void)
+{
+ int timeout;
+
+ /* Take out of PM setting first */
+ if (smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY) {
+ /* Write to the bytetest will take out of powerdown */
+ smc911x_reg_write(BYTE_TEST, 0x0);
+
+ timeout = 10;
+
+ while (timeout-- && !(smc911x_reg_read(PMT_CTRL) & PMT_CTRL_READY))
+ udelay(10);
+ if (!timeout) {
+ printf(DRIVERNAME
+ ": timeout waiting for PM restore\n");
+ return;
+ }
+ }
+
+ /* Disable interrupts */
+ smc911x_reg_write(INT_EN, 0);
+
+ smc911x_reg_write(HW_CFG, HW_CFG_SRST);
+
+ timeout = 1000;
+ while (timeout-- && smc911x_reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+ udelay(10);
+
+ if (!timeout) {
+ printf(DRIVERNAME ": reset timeout\n");
+ return;
+ }
+
+ /* Reset the FIFO level and flow control settings */
+ smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
+ smc911x_reg_write(AFC_CFG, 0x0050287F);
+
+ /* Set to LED outputs */
+ smc911x_reg_write(GPIO_CFG, 0x70070000);
+}
+
+#endif
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 9edba6a..1f5d1b4 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -1332,6 +1332,35 @@ struct phy_info phy_info_cis8201 = {
{miim_end,}
},
};
+struct phy_info phy_info_VSC8211 = {
+ 0xfc4b,
+ "Vitesse VSC8211",
+ 4,
+ (struct phy_cmd[]) { /* config */
+ /* Override PHY config settings */
+ {MIIM_CIS8201_AUX_CONSTAT,
+ MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
+ /* Set up the interface mode */
+ {MIIM_CIS8201_EXT_CON1,
+ MIIM_CIS8201_EXTCON1_INIT, NULL},
+ /* Configure some basic stuff */
+ {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* startup */
+ /* Read the Status (2x to make sure link is right) */
+ {MIIM_STATUS, miim_read, NULL},
+ /* Auto-negotiate */
+ {MIIM_STATUS, miim_read, &mii_parse_sr},
+ /* Read the status */
+ {MIIM_CIS8201_AUX_CONSTAT, miim_read,
+ &mii_parse_cis8201},
+ {miim_end,}
+ },
+ (struct phy_cmd[]) { /* shutdown */
+ {miim_end,}
+ },
+};
struct phy_info phy_info_VSC8244 = {
0x3f1b,
"Vitesse VSC8244",
@@ -1590,6 +1619,7 @@ struct phy_info *phy_info[] = {
&phy_info_M88E1149S,
&phy_info_dm9161,
&phy_info_lxt971,
+ &phy_info_VSC8211,
&phy_info_VSC8244,
&phy_info_VSC8601,
&phy_info_dp83865,
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 5957ada..fad9840 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -21,6 +21,7 @@
#include <common.h>
#include <malloc.h>
#include <spi.h>
+#include <asm/errno.h>
#include <asm/io.h>
#ifdef CONFIG_MX27
@@ -32,6 +33,8 @@
#else
+#include <asm/arch/mx31.h>
+
#define MXC_CSPIRXDATA 0x00
#define MXC_CSPITXDATA 0x04
#define MXC_CSPICTRL 0x08
@@ -68,6 +71,7 @@ struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
u32 ctrl_reg;
+ int gpio;
};
static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave)
@@ -85,26 +89,33 @@ static inline void reg_write(unsigned long addr, u32 val)
*(volatile unsigned long*)addr = val;
}
-static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen)
+static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
+ unsigned long flags)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
- if (MXC_CSPICTRL_BITCOUNT(bitlen - 1) != (cfg_reg & MXC_CSPICTRL_BITCOUNT(31))) {
- cfg_reg = (cfg_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
- MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
- }
+ mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
+ MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- reg_write(mxcs->base + MXC_CSPITXDATA, data);
+ if (cfg_reg != mxcs->ctrl_reg)
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
- cfg_reg |= MXC_CSPICTRL_XCH;
+ if (mxcs->gpio > 0 && (flags & SPI_XFER_BEGIN))
+ mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
- reg_write(mxcs->base + MXC_CSPICTRL, cfg_reg);
+ reg_write(mxcs->base + MXC_CSPITXDATA, data);
+
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_XCH);
while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
;
+ if (mxcs->gpio > 0 && (flags & SPI_XFER_END)) {
+ mx31_gpio_set(mxcs->gpio,
+ !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+ }
+
return reg_read(mxcs->base + MXC_CSPIRXDATA);
}
@@ -122,8 +133,17 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
for (i = 0, in_l = (u32 *)din, out_l = (u32 *)dout;
i < n_blks;
- i++, in_l++, out_l++, bitlen -= 32)
- *in_l = spi_xchg_single(slave, *out_l, bitlen);
+ i++, in_l++, out_l++, bitlen -= 32) {
+ u32 data = spi_xchg_single(slave, *out_l, bitlen, flags);
+
+ /* Check if we're only transfering 8 or 16 bits */
+ if (!i) {
+ if (bitlen < 9)
+ *(u8 *)din = data;
+ else if (bitlen < 17)
+ *(u16 *)din = data;
+ }
+ }
return 0;
}
@@ -132,16 +152,55 @@ void spi_init(void)
{
}
+static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
+{
+ int ret;
+
+ /*
+ * Some SPI devices require active chip-select over multiple
+ * transactions, we achieve this using a GPIO. Still, the SPI
+ * controller has to be configured to use one of its own chipselects.
+ * To use this feature you have to call spi_setup_slave() with
+ * cs = internal_cs | (gpio << 8), and you have to use some unused
+ * on this SPI controller cs between 0 and 3.
+ */
+ if (cs > 3) {
+ mxcs->gpio = cs >> 8;
+ cs &= 3;
+ ret = mx31_gpio_direction(mxcs->gpio, MX31_GPIO_DIRECTION_OUT);
+ if (ret) {
+ printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
+ return -EINVAL;
+ }
+ } else {
+ mxcs->gpio = -1;
+ }
+
+ return cs;
+}
+
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
unsigned int ctrl_reg;
struct mxc_spi_slave *mxcs;
+ int ret;
- if (bus >= sizeof(spi_bases) / sizeof(spi_bases[0]) ||
- cs > 3)
+ if (bus >= ARRAY_SIZE(spi_bases))
return NULL;
+ mxcs = malloc(sizeof(struct mxc_spi_slave));
+ if (!mxcs)
+ return NULL;
+
+ ret = decode_cs(mxcs, cs);
+ if (ret < 0) {
+ free(mxcs);
+ return NULL;
+ }
+
+ cs = ret;
+
ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
MXC_CSPICTRL_BITCOUNT(31) |
MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
@@ -155,10 +214,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
if (mode & SPI_CS_HIGH)
ctrl_reg |= MXC_CSPICTRL_SSPOL;
- mxcs = malloc(sizeof(struct mxc_spi_slave));
- if (!mxcs)
- return NULL;
-
mxcs->slave.bus = bus;
mxcs->slave.cs = cs;
mxcs->base = spi_bases[bus];
@@ -169,7 +224,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
void spi_free_slave(struct spi_slave *slave)
{
- free(slave);
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+
+ free(mxcs);
}
int spi_claim_bus(struct spi_slave *slave)
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 7fba29f..bc00852 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,8 +28,10 @@ LIB := $(obj)libvideo.a
COBJS-$(CONFIG_ATI_RADEON_FB) += ati_radeon_fb.o
COBJS-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
COBJS-$(CONFIG_CFB_CONSOLE) += cfb_console.o
+COBJS-$(CONFIG_S6E63D6) += s6e63d6.o
COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o
COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o
+COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o
COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o
COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
new file mode 100644
index 0000000..1e1d507
--- /dev/null
+++ b/drivers/video/mx3fb.c
@@ -0,0 +1,856 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <lcd.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
+#include <asm/errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+int lcd_line_length;
+int lcd_color_fg;
+int lcd_color_bg;
+
+short console_col;
+short console_row;
+
+void lcd_initcolregs(void)
+{
+}
+
+void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+void lcd_disable(void)
+{
+}
+
+void lcd_panel_disable(void)
+{
+}
+
+#define msleep(a) udelay(a * 1000)
+
+#define XRES 240
+#define YRES 320
+#define PANEL_TYPE IPU_PANEL_TFT
+#define PIXEL_CLK 185925
+#define PIXEL_FMT IPU_PIX_FMT_RGB666
+#define H_START_WIDTH 9 /* left_margin */
+#define H_SYNC_WIDTH 1 /* hsync_len */
+#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
+#define V_START_WIDTH 7 /* upper_margin */
+#define V_SYNC_WIDTH 1 /* vsync_len */
+#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
+#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF 0
+#define IF_CLK_DIV 0x175
+
+#define LCD_COLOR_IPU LCD_COLOR16
+
+static ushort colormap[256];
+
+vidinfo_t panel_info = {
+ .vl_col = XRES,
+ .vl_row = YRES,
+ .vl_bpix = LCD_COLOR_IPU,
+ .cmap = colormap,
+};
+
+#define BIT_PER_PIXEL NBITS(LCD_COLOR_IPU)
+
+/* IPU DMA Controller channel definitions. */
+enum ipu_channel {
+ IDMAC_IC_0 = 0, /* IC (encoding task) to memory */
+ IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */
+ IDMAC_ADC_0 = 1,
+ IDMAC_IC_2 = 2,
+ IDMAC_ADC_1 = 2,
+ IDMAC_IC_3 = 3,
+ IDMAC_IC_4 = 4,
+ IDMAC_IC_5 = 5,
+ IDMAC_IC_6 = 6,
+ IDMAC_IC_7 = 7, /* IC (sensor data) to memory */
+ IDMAC_IC_8 = 8,
+ IDMAC_IC_9 = 9,
+ IDMAC_IC_10 = 10,
+ IDMAC_IC_11 = 11,
+ IDMAC_IC_12 = 12,
+ IDMAC_IC_13 = 13,
+ IDMAC_SDC_0 = 14, /* Background synchronous display data */
+ IDMAC_SDC_1 = 15, /* Foreground data (overlay) */
+ IDMAC_SDC_2 = 16,
+ IDMAC_SDC_3 = 17,
+ IDMAC_ADC_2 = 18,
+ IDMAC_ADC_3 = 19,
+ IDMAC_ADC_4 = 20,
+ IDMAC_ADC_5 = 21,
+ IDMAC_ADC_6 = 22,
+ IDMAC_ADC_7 = 23,
+ IDMAC_PF_0 = 24,
+ IDMAC_PF_1 = 25,
+ IDMAC_PF_2 = 26,
+ IDMAC_PF_3 = 27,
+ IDMAC_PF_4 = 28,
+ IDMAC_PF_5 = 29,
+ IDMAC_PF_6 = 30,
+ IDMAC_PF_7 = 31,
+};
+
+/* More formats can be copied from the Linux driver if needed */
+enum pixel_fmt {
+ /* 2 bytes */
+ IPU_PIX_FMT_RGB565,
+ IPU_PIX_FMT_RGB666,
+ IPU_PIX_FMT_BGR666,
+ /* 3 bytes */
+ IPU_PIX_FMT_RGB24,
+};
+
+struct pixel_fmt_cfg {
+ u32 b0;
+ u32 b1;
+ u32 b2;
+ u32 acc;
+};
+
+static struct pixel_fmt_cfg fmt_cfg[] = {
+ [IPU_PIX_FMT_RGB24] = {
+ 0x1600AAAA, 0x00E05555, 0x00070000, 3,
+ },
+ [IPU_PIX_FMT_RGB666] = {
+ 0x0005000F, 0x000B000F, 0x0011000F, 1,
+ },
+ [IPU_PIX_FMT_BGR666] = {
+ 0x0011000F, 0x000B000F, 0x0005000F, 1,
+ },
+ [IPU_PIX_FMT_RGB565] = {
+ 0x0004003F, 0x000A000F, 0x000F003F, 1,
+ }
+};
+
+enum ipu_panel {
+ IPU_PANEL_SHARP_TFT,
+ IPU_PANEL_TFT,
+};
+
+/* IPU Common registers */
+/* IPU_CONF and its bits already defined in mx31-regs.h */
+#define IPU_CHA_BUF0_RDY (0x04 + IPU_BASE)
+#define IPU_CHA_BUF1_RDY (0x08 + IPU_BASE)
+#define IPU_CHA_DB_MODE_SEL (0x0C + IPU_BASE)
+#define IPU_CHA_CUR_BUF (0x10 + IPU_BASE)
+#define IPU_FS_PROC_FLOW (0x14 + IPU_BASE)
+#define IPU_FS_DISP_FLOW (0x18 + IPU_BASE)
+#define IPU_TASKS_STAT (0x1C + IPU_BASE)
+#define IPU_IMA_ADDR (0x20 + IPU_BASE)
+#define IPU_IMA_DATA (0x24 + IPU_BASE)
+#define IPU_INT_CTRL_1 (0x28 + IPU_BASE)
+#define IPU_INT_CTRL_2 (0x2C + IPU_BASE)
+#define IPU_INT_CTRL_3 (0x30 + IPU_BASE)
+#define IPU_INT_CTRL_4 (0x34 + IPU_BASE)
+#define IPU_INT_CTRL_5 (0x38 + IPU_BASE)
+#define IPU_INT_STAT_1 (0x3C + IPU_BASE)
+#define IPU_INT_STAT_2 (0x40 + IPU_BASE)
+#define IPU_INT_STAT_3 (0x44 + IPU_BASE)
+#define IPU_INT_STAT_4 (0x48 + IPU_BASE)
+#define IPU_INT_STAT_5 (0x4C + IPU_BASE)
+#define IPU_BRK_CTRL_1 (0x50 + IPU_BASE)
+#define IPU_BRK_CTRL_2 (0x54 + IPU_BASE)
+#define IPU_BRK_STAT (0x58 + IPU_BASE)
+#define IPU_DIAGB_CTRL (0x5C + IPU_BASE)
+
+/* Image Converter Registers */
+#define IC_CONF (0x88 + IPU_BASE)
+#define IC_PRP_ENC_RSC (0x8C + IPU_BASE)
+#define IC_PRP_VF_RSC (0x90 + IPU_BASE)
+#define IC_PP_RSC (0x94 + IPU_BASE)
+#define IC_CMBP_1 (0x98 + IPU_BASE)
+#define IC_CMBP_2 (0x9C + IPU_BASE)
+#define PF_CONF (0xA0 + IPU_BASE)
+#define IDMAC_CONF (0xA4 + IPU_BASE)
+#define IDMAC_CHA_EN (0xA8 + IPU_BASE)
+#define IDMAC_CHA_PRI (0xAC + IPU_BASE)
+#define IDMAC_CHA_BUSY (0xB0 + IPU_BASE)
+
+/* Image Converter Register bits */
+#define IC_CONF_PRPENC_EN 0x00000001
+#define IC_CONF_PRPENC_CSC1 0x00000002
+#define IC_CONF_PRPENC_ROT_EN 0x00000004
+#define IC_CONF_PRPVF_EN 0x00000100
+#define IC_CONF_PRPVF_CSC1 0x00000200
+#define IC_CONF_PRPVF_CSC2 0x00000400
+#define IC_CONF_PRPVF_CMB 0x00000800
+#define IC_CONF_PRPVF_ROT_EN 0x00001000
+#define IC_CONF_PP_EN 0x00010000
+#define IC_CONF_PP_CSC1 0x00020000
+#define IC_CONF_PP_CSC2 0x00040000
+#define IC_CONF_PP_CMB 0x00080000
+#define IC_CONF_PP_ROT_EN 0x00100000
+#define IC_CONF_IC_GLB_LOC_A 0x10000000
+#define IC_CONF_KEY_COLOR_EN 0x20000000
+#define IC_CONF_RWS_EN 0x40000000
+#define IC_CONF_CSI_MEM_WR_EN 0x80000000
+
+/* SDC Registers */
+#define SDC_COM_CONF (0xB4 + IPU_BASE)
+#define SDC_GW_CTRL (0xB8 + IPU_BASE)
+#define SDC_FG_POS (0xBC + IPU_BASE)
+#define SDC_BG_POS (0xC0 + IPU_BASE)
+#define SDC_CUR_POS (0xC4 + IPU_BASE)
+#define SDC_PWM_CTRL (0xC8 + IPU_BASE)
+#define SDC_CUR_MAP (0xCC + IPU_BASE)
+#define SDC_HOR_CONF (0xD0 + IPU_BASE)
+#define SDC_VER_CONF (0xD4 + IPU_BASE)
+#define SDC_SHARP_CONF_1 (0xD8 + IPU_BASE)
+#define SDC_SHARP_CONF_2 (0xDC + IPU_BASE)
+
+/* Register bits */
+#define SDC_COM_TFT_COLOR 0x00000001UL
+#define SDC_COM_FG_EN 0x00000010UL
+#define SDC_COM_GWSEL 0x00000020UL
+#define SDC_COM_GLB_A 0x00000040UL
+#define SDC_COM_KEY_COLOR_G 0x00000080UL
+#define SDC_COM_BG_EN 0x00000200UL
+#define SDC_COM_SHARP 0x00001000UL
+
+#define SDC_V_SYNC_WIDTH_L 0x00000001UL
+
+/* Display Interface registers */
+#define DI_DISP_IF_CONF (0x0124 + IPU_BASE)
+#define DI_DISP_SIG_POL (0x0128 + IPU_BASE)
+#define DI_SER_DISP1_CONF (0x012C + IPU_BASE)
+#define DI_SER_DISP2_CONF (0x0130 + IPU_BASE)
+#define DI_HSP_CLK_PER (0x0134 + IPU_BASE)
+#define DI_DISP0_TIME_CONF_1 (0x0138 + IPU_BASE)
+#define DI_DISP0_TIME_CONF_2 (0x013C + IPU_BASE)
+#define DI_DISP0_TIME_CONF_3 (0x0140 + IPU_BASE)
+#define DI_DISP1_TIME_CONF_1 (0x0144 + IPU_BASE)
+#define DI_DISP1_TIME_CONF_2 (0x0148 + IPU_BASE)
+#define DI_DISP1_TIME_CONF_3 (0x014C + IPU_BASE)
+#define DI_DISP2_TIME_CONF_1 (0x0150 + IPU_BASE)
+#define DI_DISP2_TIME_CONF_2 (0x0154 + IPU_BASE)
+#define DI_DISP2_TIME_CONF_3 (0x0158 + IPU_BASE)
+#define DI_DISP3_TIME_CONF (0x015C + IPU_BASE)
+#define DI_DISP0_DB0_MAP (0x0160 + IPU_BASE)
+#define DI_DISP0_DB1_MAP (0x0164 + IPU_BASE)
+#define DI_DISP0_DB2_MAP (0x0168 + IPU_BASE)
+#define DI_DISP0_CB0_MAP (0x016C + IPU_BASE)
+#define DI_DISP0_CB1_MAP (0x0170 + IPU_BASE)
+#define DI_DISP0_CB2_MAP (0x0174 + IPU_BASE)
+#define DI_DISP1_DB0_MAP (0x0178 + IPU_BASE)
+#define DI_DISP1_DB1_MAP (0x017C + IPU_BASE)
+#define DI_DISP1_DB2_MAP (0x0180 + IPU_BASE)
+#define DI_DISP1_CB0_MAP (0x0184 + IPU_BASE)
+#define DI_DISP1_CB1_MAP (0x0188 + IPU_BASE)
+#define DI_DISP1_CB2_MAP (0x018C + IPU_BASE)
+#define DI_DISP2_DB0_MAP (0x0190 + IPU_BASE)
+#define DI_DISP2_DB1_MAP (0x0194 + IPU_BASE)
+#define DI_DISP2_DB2_MAP (0x0198 + IPU_BASE)
+#define DI_DISP2_CB0_MAP (0x019C + IPU_BASE)
+#define DI_DISP2_CB1_MAP (0x01A0 + IPU_BASE)
+#define DI_DISP2_CB2_MAP (0x01A4 + IPU_BASE)
+#define DI_DISP3_B0_MAP (0x01A8 + IPU_BASE)
+#define DI_DISP3_B1_MAP (0x01AC + IPU_BASE)
+#define DI_DISP3_B2_MAP (0x01B0 + IPU_BASE)
+#define DI_DISP_ACC_CC (0x01B4 + IPU_BASE)
+#define DI_DISP_LLA_CONF (0x01B8 + IPU_BASE)
+#define DI_DISP_LLA_DATA (0x01BC + IPU_BASE)
+
+/* DI_DISP_SIG_POL bits */
+#define DI_D3_VSYNC_POL (1 << 28)
+#define DI_D3_HSYNC_POL (1 << 27)
+#define DI_D3_DRDY_SHARP_POL (1 << 26)
+#define DI_D3_CLK_POL (1 << 25)
+#define DI_D3_DATA_POL (1 << 24)
+
+/* DI_DISP_IF_CONF bits */
+#define DI_D3_CLK_IDLE (1 << 26)
+#define DI_D3_CLK_SEL (1 << 25)
+#define DI_D3_DATAMSK (1 << 24)
+
+#define IOMUX_PADNUM_MASK 0x1ff
+#define IOMUX_GPIONUM_SHIFT 9
+#define IOMUX_GPIONUM_MASK (0xff << IOMUX_GPIONUM_SHIFT)
+
+#define IOMUX_PIN(gpionum, padnum) ((padnum) & IOMUX_PADNUM_MASK)
+
+#define IOMUX_MODE_L(pin, mode) IOMUX_MODE(((pin) + 0xc) ^ 3, mode)
+
+enum lcd_pin {
+ MX31_PIN_D3_SPL = IOMUX_PIN(0xff, 19),
+ MX31_PIN_D3_CLS = IOMUX_PIN(0xff, 20),
+ MX31_PIN_D3_REV = IOMUX_PIN(0xff, 21),
+ MX31_PIN_CONTRAST = IOMUX_PIN(0xff, 22),
+ MX31_PIN_VSYNC3 = IOMUX_PIN(0xff, 23),
+
+ MX31_PIN_DRDY0 = IOMUX_PIN(0xff, 33),
+ MX31_PIN_FPSHIFT = IOMUX_PIN(0xff, 34),
+ MX31_PIN_HSYNC = IOMUX_PIN(0xff, 35),
+
+ MX31_PIN_LD17 = IOMUX_PIN(0xff, 37),
+ MX31_PIN_LD16 = IOMUX_PIN(0xff, 38),
+ MX31_PIN_LD15 = IOMUX_PIN(0xff, 39),
+ MX31_PIN_LD14 = IOMUX_PIN(0xff, 40),
+ MX31_PIN_LD13 = IOMUX_PIN(0xff, 41),
+ MX31_PIN_LD12 = IOMUX_PIN(0xff, 42),
+ MX31_PIN_LD11 = IOMUX_PIN(0xff, 43),
+ MX31_PIN_LD10 = IOMUX_PIN(0xff, 44),
+ MX31_PIN_LD9 = IOMUX_PIN(0xff, 45),
+ MX31_PIN_LD8 = IOMUX_PIN(0xff, 46),
+ MX31_PIN_LD7 = IOMUX_PIN(0xff, 47),
+ MX31_PIN_LD6 = IOMUX_PIN(0xff, 48),
+ MX31_PIN_LD5 = IOMUX_PIN(0xff, 49),
+ MX31_PIN_LD4 = IOMUX_PIN(0xff, 50),
+ MX31_PIN_LD3 = IOMUX_PIN(0xff, 51),
+ MX31_PIN_LD2 = IOMUX_PIN(0xff, 52),
+ MX31_PIN_LD1 = IOMUX_PIN(0xff, 53),
+ MX31_PIN_LD0 = IOMUX_PIN(0xff, 54),
+};
+
+struct chan_param_mem_planar {
+ /* Word 0 */
+ u32 xv:10;
+ u32 yv:10;
+ u32 xb:12;
+
+ u32 yb:12;
+ u32 res1:2;
+ u32 nsb:1;
+ u32 lnpb:6;
+ u32 ubo_l:11;
+
+ u32 ubo_h:15;
+ u32 vbo_l:17;
+
+ u32 vbo_h:9;
+ u32 res2:3;
+ u32 fw:12;
+ u32 fh_l:8;
+
+ u32 fh_h:4;
+ u32 res3:28;
+
+ /* Word 1 */
+ u32 eba0;
+
+ u32 eba1;
+
+ u32 bpp:3;
+ u32 sl:14;
+ u32 pfs:3;
+ u32 bam:3;
+ u32 res4:2;
+ u32 npb:6;
+ u32 res5:1;
+
+ u32 sat:2;
+ u32 res6:30;
+} __attribute__ ((packed));
+
+struct chan_param_mem_interleaved {
+ /* Word 0 */
+ u32 xv:10;
+ u32 yv:10;
+ u32 xb:12;
+
+ u32 yb:12;
+ u32 sce:1;
+ u32 res1:1;
+ u32 nsb:1;
+ u32 lnpb:6;
+ u32 sx:10;
+ u32 sy_l:1;
+
+ u32 sy_h:9;
+ u32 ns:10;
+ u32 sm:10;
+ u32 sdx_l:3;
+
+ u32 sdx_h:2;
+ u32 sdy:5;
+ u32 sdrx:1;
+ u32 sdry:1;
+ u32 sdr1:1;
+ u32 res2:2;
+ u32 fw:12;
+ u32 fh_l:8;
+
+ u32 fh_h:4;
+ u32 res3:28;
+
+ /* Word 1 */
+ u32 eba0;
+
+ u32 eba1;
+
+ u32 bpp:3;
+ u32 sl:14;
+ u32 pfs:3;
+ u32 bam:3;
+ u32 res4:2;
+ u32 npb:6;
+ u32 res5:1;
+
+ u32 sat:2;
+ u32 scc:1;
+ u32 ofs0:5;
+ u32 ofs1:5;
+ u32 ofs2:5;
+ u32 ofs3:5;
+ u32 wid0:3;
+ u32 wid1:3;
+ u32 wid2:3;
+
+ u32 wid3:3;
+ u32 dec_sel:1;
+ u32 res6:28;
+} __attribute__ ((packed));
+
+union chan_param_mem {
+ struct chan_param_mem_planar pp;
+ struct chan_param_mem_interleaved ip;
+};
+
+static inline u32 reg_read(unsigned long reg)
+{
+ return __REG(reg);
+}
+
+static inline void reg_write(u32 value, unsigned long reg)
+{
+ __REG(reg) = value;
+}
+
+/*
+ * sdc_init_panel() - initialize a synchronous LCD panel.
+ * @width: width of panel in pixels.
+ * @height: height of panel in pixels.
+ * @pixel_fmt: pixel format of buffer as FOURCC ASCII code.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int sdc_init_panel(u16 width, u16 height, enum pixel_fmt pixel_fmt)
+{
+ u32 reg;
+ uint32_t old_conf;
+
+ /* Init panel size and blanking periods */
+ reg = ((H_SYNC_WIDTH - 1) << 26) |
+ ((u32)(width + H_START_WIDTH + H_END_WIDTH - 1) << 16);
+ reg_write(reg, SDC_HOR_CONF);
+
+ reg = ((V_SYNC_WIDTH - 1) << 26) | SDC_V_SYNC_WIDTH_L |
+ ((u32)(height + V_START_WIDTH + V_END_WIDTH - 1) << 16);
+ reg_write(reg, SDC_VER_CONF);
+
+ switch (PANEL_TYPE) {
+ case IPU_PANEL_SHARP_TFT:
+ reg_write(0x00FD0102L, SDC_SHARP_CONF_1);
+ reg_write(0x00F500F4L, SDC_SHARP_CONF_2);
+ reg_write(SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ case IPU_PANEL_TFT:
+ reg_write(SDC_COM_TFT_COLOR, SDC_COM_CONF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* Init clocking */
+
+ /*
+ * Calculate divider: fractional part is 4 bits so simply multiple by
+ * 2^4 to get fractional part, as long as we stay under ~250MHz and on
+ * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz
+ */
+
+ reg_write((((IF_CLK_DIV / 8) - 1) << 22) |
+ IF_CLK_DIV, DI_DISP3_TIME_CONF);
+
+ /* DI settings */
+ old_conf = reg_read(DI_DISP_IF_CONF) & 0x78FFFFFF;
+ reg_write(old_conf | IF_CONF, DI_DISP_IF_CONF);
+
+ old_conf = reg_read(DI_DISP_SIG_POL) & 0xE0FFFFFF;
+ reg_write(old_conf | SIG_POL, DI_DISP_SIG_POL);
+
+ reg_write(fmt_cfg[pixel_fmt].b0, DI_DISP3_B0_MAP);
+ reg_write(fmt_cfg[pixel_fmt].b1, DI_DISP3_B1_MAP);
+ reg_write(fmt_cfg[pixel_fmt].b2, DI_DISP3_B2_MAP);
+ reg_write(reg_read(DI_DISP_ACC_CC) |
+ ((fmt_cfg[pixel_fmt].acc - 1) << 12), DI_DISP_ACC_CC);
+
+ return 0;
+}
+
+static void ipu_ch_param_set_size(union chan_param_mem *params,
+ uint32_t pixel_fmt, uint16_t width,
+ uint16_t height, uint16_t stride)
+{
+ params->pp.fw = width - 1;
+ params->pp.fh_l = height - 1;
+ params->pp.fh_h = (height - 1) >> 8;
+ params->pp.sl = stride - 1;
+
+ /* See above, for further formats see the Linux driver */
+ switch (pixel_fmt) {
+ case IPU_PIX_FMT_RGB565:
+ params->ip.bpp = 2;
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 0; /* Red bit offset */
+ params->ip.ofs1 = 5; /* Green bit offset */
+ params->ip.ofs2 = 11; /* Blue bit offset */
+ params->ip.ofs3 = 16; /* Alpha bit offset */
+ params->ip.wid0 = 4; /* Red bit width - 1 */
+ params->ip.wid1 = 5; /* Green bit width - 1 */
+ params->ip.wid2 = 4; /* Blue bit width - 1 */
+ break;
+ case IPU_PIX_FMT_RGB24:
+ params->ip.bpp = 1; /* 24 BPP & RGB PFS */
+ params->ip.pfs = 4;
+ params->ip.npb = 7;
+ params->ip.sat = 2; /* SAT = 32-bit access */
+ params->ip.ofs0 = 16; /* Red bit offset */
+ params->ip.ofs1 = 8; /* Green bit offset */
+ params->ip.ofs2 = 0; /* Blue bit offset */
+ params->ip.ofs3 = 24; /* Alpha bit offset */
+ params->ip.wid0 = 7; /* Red bit width - 1 */
+ params->ip.wid1 = 7; /* Green bit width - 1 */
+ params->ip.wid2 = 7; /* Blue bit width - 1 */
+ break;
+ default:
+ break;
+ }
+
+ params->pp.nsb = 1;
+}
+
+static void ipu_ch_param_set_buffer(union chan_param_mem *params,
+ void *buf0, void *buf1)
+{
+ params->pp.eba0 = (u32)buf0;
+ params->pp.eba1 = (u32)buf1;
+}
+
+static void ipu_write_param_mem(uint32_t addr, uint32_t *data,
+ uint32_t num_words)
+{
+ for (; num_words > 0; num_words--) {
+ reg_write(addr, IPU_IMA_ADDR);
+ reg_write(*data++, IPU_IMA_DATA);
+ addr++;
+ if ((addr & 0x7) == 5) {
+ addr &= ~0x7; /* set to word 0 */
+ addr += 8; /* increment to next row */
+ }
+ }
+}
+
+static uint32_t bpp_to_pixfmt(int bpp)
+{
+ switch (bpp) {
+ case 16:
+ return IPU_PIX_FMT_RGB565;
+ default:
+ return 0;
+ }
+}
+
+static uint32_t dma_param_addr(enum ipu_channel channel)
+{
+ /* Channel Parameter Memory */
+ return 0x10000 | (channel << 4);
+}
+
+static void ipu_init_channel_buffer(enum ipu_channel channel, void *fbmem)
+{
+ union chan_param_mem params = {};
+ uint32_t reg;
+ uint32_t stride_bytes;
+
+ stride_bytes = (XRES * ((BIT_PER_PIXEL + 7) / 8) + 3) & ~3;
+
+ /* Build parameter memory data for DMA channel */
+ ipu_ch_param_set_size(&params, bpp_to_pixfmt(BIT_PER_PIXEL),
+ XRES, YRES, stride_bytes);
+ ipu_ch_param_set_buffer(&params, fbmem, NULL);
+ params.pp.bam = 0;
+ /* Some channels (rotation) have restriction on burst length */
+
+ switch (channel) {
+ case IDMAC_SDC_0:
+ /* In original code only IPU_PIX_FMT_RGB565 was setting burst */
+ params.pp.npb = 16 - 1;
+ break;
+ default:
+ break;
+ }
+
+ ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)&params, 10);
+
+ /* Disable double-buffering */
+ reg = reg_read(IPU_CHA_DB_MODE_SEL);
+ reg &= ~(1UL << channel);
+ reg_write(reg, IPU_CHA_DB_MODE_SEL);
+}
+
+static void ipu_channel_set_priority(enum ipu_channel channel,
+ int prio)
+{
+ u32 reg = reg_read(IDMAC_CHA_PRI);
+
+ if (prio)
+ reg |= 1UL << channel;
+ else
+ reg &= ~(1UL << channel);
+
+ reg_write(reg, IDMAC_CHA_PRI);
+}
+
+/*
+ * ipu_enable_channel() - enable an IPU channel.
+ * @channel: channel ID.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int ipu_enable_channel(enum ipu_channel channel)
+{
+ uint32_t reg;
+
+ /* Reset to buffer 0 */
+ reg_write(1UL << channel, IPU_CHA_CUR_BUF);
+
+ switch (channel) {
+ case IDMAC_SDC_0:
+ ipu_channel_set_priority(channel, 1);
+ break;
+ default:
+ break;
+ }
+
+ reg = reg_read(IDMAC_CHA_EN);
+ reg_write(reg | (1UL << channel), IDMAC_CHA_EN);
+
+ return 0;
+}
+
+static int ipu_update_channel_buffer(enum ipu_channel channel, void *buf)
+{
+ uint32_t reg;
+
+ reg = reg_read(IPU_CHA_BUF0_RDY);
+ if (reg & (1UL << channel))
+ return -EACCES;
+
+ /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */
+ reg_write(dma_param_addr(channel) + 0x0008UL, IPU_IMA_ADDR);
+ reg_write((u32)buf, IPU_IMA_DATA);
+
+ return 0;
+}
+
+static int idmac_tx_submit(enum ipu_channel channel, void *buf)
+{
+ int ret;
+
+ ipu_init_channel_buffer(channel, buf);
+
+
+ /* ipu_idmac.c::ipu_submit_channel_buffers() */
+ ret = ipu_update_channel_buffer(channel, buf);
+ if (ret < 0)
+ return ret;
+
+ /* ipu_idmac.c::ipu_select_buffer() */
+ /* Mark buffer 0 as ready. */
+ reg_write(1UL << channel, IPU_CHA_BUF0_RDY);
+
+
+ ret = ipu_enable_channel(channel);
+ return ret;
+}
+
+static void sdc_enable_channel(void *fbmem)
+{
+ int ret;
+ u32 reg;
+
+ ret = idmac_tx_submit(IDMAC_SDC_0, fbmem);
+
+ /* mx3fb.c::sdc_fb_init() */
+ if (ret >= 0) {
+ reg = reg_read(SDC_COM_CONF);
+ reg_write(reg | SDC_COM_BG_EN, SDC_COM_CONF);
+ }
+
+ /*
+ * Attention! Without this msleep the channel keeps generating
+ * interrupts. Next sdc_set_brightness() is going to be called
+ * from mx3fb_blank().
+ */
+ msleep(2);
+}
+
+/*
+ * mx3fb_set_par() - set framebuffer parameters and change the operating mode.
+ * @return: 0 on success or negative error code on failure.
+ */
+static int mx3fb_set_par(void)
+{
+ int ret;
+
+ ret = sdc_init_panel(XRES, YRES, PIXEL_FMT);
+ if (ret < 0)
+ return ret;
+
+ reg_write((H_START_WIDTH << 16) | V_START_WIDTH, SDC_BG_POS);
+
+ return 0;
+}
+
+/* References in this function refer to respective Linux kernel sources */
+void lcd_enable(void)
+{
+ u32 reg;
+
+ /* pcm037.c::mxc_board_init() */
+
+ /* Display Interface #3 */
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD0, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD1, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD2, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD3, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD4, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD5, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD6, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD7, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD8, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD9, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD10, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD11, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD12, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD13, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD14, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD15, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD16, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_LD17, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_VSYNC3, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_HSYNC, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_FPSHIFT, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_DRDY0, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_REV, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_CONTRAST, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_SPL, MUX_CTL_FUNC));
+ mx31_gpio_mux(IOMUX_MODE_L(MX31_PIN_D3_CLS, MUX_CTL_FUNC));
+
+
+ /* ipu_idmac.c::ipu_probe() */
+
+ /* Start the clock */
+ __REG(CCM_CGR1) = __REG(CCM_CGR1) | (3 << 22);
+
+
+ /* ipu_idmac.c::ipu_idmac_init() */
+
+ /* Service request counter to maximum - shouldn't be needed */
+ reg_write(0x00000070, IDMAC_CONF);
+
+
+ /* ipu_idmac.c::ipu_init_channel() */
+
+ /* Enable IPU sub modules */
+ reg = reg_read(IPU_CONF) | IPU_CONF_SDC_EN | IPU_CONF_DI_EN;
+ reg_write(reg, IPU_CONF);
+
+
+ /* mx3fb.c::init_fb_chan() */
+
+ /* set Display Interface clock period */
+ reg_write(0x00100010L, DI_HSP_CLK_PER);
+ /* Might need to trigger HSP clock change - see 44.3.3.8.5 */
+
+
+ /* mx3fb.c::sdc_set_brightness() */
+
+ /* This might be board-specific */
+ reg_write(0x03000000UL | 255 << 16, SDC_PWM_CTRL);
+
+
+ /* mx3fb.c::sdc_set_global_alpha() */
+
+ /* Use global - not per-pixel - Alpha-blending */
+ reg = reg_read(SDC_GW_CTRL) & 0x00FFFFFFL;
+ reg_write(reg | ((uint32_t) 0xff << 24), SDC_GW_CTRL);
+
+ reg = reg_read(SDC_COM_CONF);
+ reg_write(reg | SDC_COM_GLB_A, SDC_COM_CONF);
+
+
+ /* mx3fb.c::sdc_set_color_key() */
+
+ /* Disable colour-keying for background */
+ reg = reg_read(SDC_COM_CONF) &
+ ~(SDC_COM_GWSEL | SDC_COM_KEY_COLOR_G);
+ reg_write(reg, SDC_COM_CONF);
+
+
+ mx3fb_set_par();
+
+ sdc_enable_channel(lcd_base);
+
+ /*
+ * Linux driver calls sdc_set_brightness() here again,
+ * once is enough for us
+ */
+}
+
+void lcd_ctrl_init(void *lcdbase)
+{
+ u32 mem_len = XRES * YRES * BIT_PER_PIXEL / 8;
+ /*
+ * We rely on lcdbase being a physical address, i.e., either MMU off,
+ * or 1-to-1 mapping. Might want to add some virt2phys here.
+ */
+ if (!lcdbase)
+ return;
+
+ memset(lcdbase, 0, mem_len);
+}
+
+ulong calc_fbsize(void)
+{
+ return ((panel_info.vl_col * panel_info.vl_row *
+ NBITS(panel_info.vl_bpix)) / 8) + PAGE_SIZE;
+}
+
+int overwrite_console(void)
+{
+ /* Keep stdout / stderr on serial, our LCD is for splashscreen only */
+ return 1;
+}
diff --git a/drivers/video/s6e63d6.c b/drivers/video/s6e63d6.c
new file mode 100644
index 0000000..d163506
--- /dev/null
+++ b/drivers/video/s6e63d6.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <spi.h>
+#include <s6e63d6.h>
+
+/*
+ * Each transfer is performed as:
+ * 1. chip-select active
+ * 2. send 8-bit start code
+ * 3. send 16-bit data
+ * 4. chip-select inactive
+ */
+static int send_word(struct s6e63d6 *data, u8 rs, u16 word)
+{
+ /*
+ * The start byte looks like (binary):
+ * 01110<ID><RS><R/W>
+ * RS is 0 for index or 1 for data, and R/W is 0 for write.
+ */
+ u32 buf8 = 0x70 | data->id | (rs & 2);
+ u32 buf16 = cpu_to_le16(word);
+ u32 buf_in;
+ int err;
+
+ err = spi_xfer(data->slave, 8, &buf8, &buf_in, SPI_XFER_BEGIN);
+ if (err)
+ return err;
+
+ return spi_xfer(data->slave, 16, &buf16, &buf_in, SPI_XFER_END);
+}
+
+/* Index and param differ in Register Select bit */
+int s6e63d6_index(struct s6e63d6 *data, u8 idx)
+{
+ return send_word(data, 0, idx);
+}
+
+int s6e63d6_param(struct s6e63d6 *data, u16 param)
+{
+ return send_word(data, 2, param);
+}
+
+int s6e63d6_init(struct s6e63d6 *data)
+{
+ if (data->id != 0 && data->id != 4) {
+ printf("s6e63d6: invalid ID %u\n", data->id);
+ return 1;
+ }
+
+ data->slave = spi_setup_slave(data->bus, data->cs, 100000, SPI_MODE_3);
+ if (!data->slave)
+ return 1;
+
+ return 0;
+}
diff --git a/examples/.gitignore b/examples/.gitignore
index 806425f..0d1864c 100644
--- a/examples/.gitignore
+++ b/examples/.gitignore
@@ -6,5 +6,6 @@
/timer
/sched
/smc91111_eeprom
+/smc911x_eeprom
*.bin
*.srec
diff --git a/examples/Makefile b/examples/Makefile
index 927010d..dbcfa92 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -105,9 +105,10 @@ BIN += sched.bin
endif
ifeq ($(ARCH),blackfin)
-ELF += smc91111_eeprom
-SREC += smc91111_eeprom.srec
-BIN += smc91111_eeprom.bin
+BFIN_BIN = smc91111_eeprom smc911x_eeprom
+ELF += $(BFIN_BIN)
+SREC += $(addsuffix .srec,$(BFIN_BIN))
+BIN += $(addsuffix .bin,$(BFIN_BIN))
endif
# The following example is pretty 8xx specific...
diff --git a/examples/smc911x_eeprom.c b/examples/smc911x_eeprom.c
new file mode 100644
index 0000000..3dac4d3
--- /dev/null
+++ b/examples/smc911x_eeprom.c
@@ -0,0 +1,381 @@
+/*
+ * smc911x_eeprom.c - EEPROM interface to SMC911x parts.
+ * Only tested on SMSC9118 though ...
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * Based on smc91111_eeprom.c which:
+ * Heavily borrowed from the following peoples GPL'ed software:
+ * - Wolfgang Denk, DENX Software Engineering, wd@denx.de
+ * Das U-boot
+ * - Ladislav Michl ladis@linux-mips.org
+ * A rejected patch on the U-Boot mailing list
+ */
+
+#include <common.h>
+#include <exports.h>
+
+#ifdef CONFIG_DRIVER_SMC911X
+
+#include "../drivers/net/smc911x.h"
+
+/**
+ * smsc_ctrlc - detect press of CTRL+C (common ctrlc() isnt exported!?)
+ */
+static int smsc_ctrlc(void)
+{
+ return (tstc() && getc() == 0x03);
+}
+
+/**
+ * usage - dump usage information
+ */
+static void usage(void)
+{
+ puts(
+ "MAC/EEPROM Commands:\n"
+ " P : Print the MAC addresses\n"
+ " D : Dump the EEPROM contents\n"
+ " M : Dump the MAC contents\n"
+ " C : Copy the MAC address from the EEPROM to the MAC\n"
+ " W : Write a register in the EEPROM or in the MAC\n"
+ " Q : Quit\n"
+ "\n"
+ "Some commands take arguments:\n"
+ " W <E|M> <register> <value>\n"
+ " E: EEPROM M: MAC\n"
+ );
+}
+
+/**
+ * dump_regs - dump the MAC registers
+ *
+ * Registers 0x00 - 0x50 are FIFOs. The 0x50+ are the control registers
+ * and they're all 32bits long. 0xB8+ are reserved, so don't bother.
+ */
+static void dump_regs(void)
+{
+ u8 i, j = 0;
+ for (i = 0x50; i < 0xB8; i += sizeof(u32))
+ printf("%02x: 0x%08x %c", i, reg_read(CONFIG_DRIVER_SMC911X_BASE + i),
+ (j++ % 2 ? '\n' : ' '));
+}
+
+/**
+ * do_eeprom_cmd - handle eeprom communication
+ */
+static int do_eeprom_cmd(int cmd, u8 reg)
+{
+ if (reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY) {
+ printf("eeprom_cmd: busy at start (E2P_CMD = 0x%08x)\n",
+ reg_read(E2P_CMD));
+ return -1;
+ }
+
+ reg_write(E2P_CMD, E2P_CMD_EPC_BUSY | cmd | reg);
+
+ while (reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+ if (smsc_ctrlc()) {
+ printf("eeprom_cmd: timeout (E2P_CMD = 0x%08x)\n",
+ reg_read(E2P_CMD));
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * read_eeprom_reg - read specified register in EEPROM
+ */
+static u8 read_eeprom_reg(u8 reg)
+{
+ int ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_READ, reg);
+ return (ret ? : reg_read(E2P_DATA));
+}
+
+/**
+ * write_eeprom_reg - write specified value into specified register in EEPROM
+ */
+static int write_eeprom_reg(u8 value, u8 reg)
+{
+ int ret;
+
+ /* enable erasing/writing */
+ ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWEN, reg);
+ if (ret)
+ goto done;
+
+ /* erase the eeprom reg */
+ ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_ERASE, reg);
+ if (ret)
+ goto done;
+
+ /* write the eeprom reg */
+ reg_write(E2P_DATA, value);
+ ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_WRITE, reg);
+ if (ret)
+ goto done;
+
+ /* disable erasing/writing */
+ ret = do_eeprom_cmd(E2P_CMD_EPC_CMD_EWDS, reg);
+
+ done:
+ return ret;
+}
+
+/**
+ * skip_space - find first non-whitespace in given pointer
+ */
+static char *skip_space(char *buf)
+{
+ while (buf[0] == ' ' || buf[0] == '\t')
+ ++buf;
+ return buf;
+}
+
+/**
+ * write_stuff - handle writing of MAC registers / eeprom
+ */
+static void write_stuff(char *line)
+{
+ char dest;
+ char *endp;
+ u8 reg;
+ u32 value;
+
+ /* Skip over the "W " part of the command */
+ line = skip_space(line + 1);
+
+ /* Figure out destination */
+ switch (line[0]) {
+ case 'E':
+ case 'M':
+ dest = line[0];
+ break;
+ default:
+ invalid_usage:
+ printf("ERROR: Invalid write usage\n");
+ usage();
+ return;
+ }
+
+ /* Get the register to write */
+ line = skip_space(line + 1);
+ reg = simple_strtoul(line, &endp, 16);
+ if (line == endp)
+ goto invalid_usage;
+
+ /* Get the value to write */
+ line = skip_space(endp);
+ value = simple_strtoul(line, &endp, 16);
+ if (line == endp)
+ goto invalid_usage;
+
+ /* Check for trailing cruft */
+ line = skip_space(endp);
+ if (line[0])
+ goto invalid_usage;
+
+ /* Finally, execute the command */
+ if (dest == 'E') {
+ printf("Writing EEPROM register %02x with %02x\n", reg, value);
+ write_eeprom_reg(value, reg);
+ } else {
+ printf("Writing MAC register %02x with %08x\n", reg, value);
+ reg_write(CONFIG_DRIVER_SMC911X_BASE + reg, value);
+ }
+}
+
+/**
+ * copy_from_eeprom - copy MAC address in eeprom to address registers
+ */
+static void copy_from_eeprom(void)
+{
+ ulong addrl =
+ read_eeprom_reg(0x01) |
+ read_eeprom_reg(0x02) << 8 |
+ read_eeprom_reg(0x03) << 16 |
+ read_eeprom_reg(0x04) << 24;
+ ulong addrh =
+ read_eeprom_reg(0x05) |
+ read_eeprom_reg(0x06) << 8;
+ smc911x_set_mac_csr(ADDRL, addrl);
+ smc911x_set_mac_csr(ADDRH, addrh);
+ puts("EEPROM contents copied to MAC\n");
+}
+
+/**
+ * print_macaddr - print MAC address registers and MAC address in eeprom
+ */
+static void print_macaddr(void)
+{
+ puts("Current MAC Address in MAC: ");
+ ulong addrl = smc911x_get_mac_csr(ADDRL);
+ ulong addrh = smc911x_get_mac_csr(ADDRH);
+ printf("%02x:%02x:%02x:%02x:%02x:%02x\n",
+ (u8)(addrl), (u8)(addrl >> 8), (u8)(addrl >> 16),
+ (u8)(addrl >> 24), (u8)(addrh), (u8)(addrh >> 8));
+
+ puts("Current MAC Address in EEPROM: ");
+ int i;
+ for (i = 1; i < 6; ++i)
+ printf("%02x:", read_eeprom_reg(i));
+ printf("%02x\n", read_eeprom_reg(i));
+}
+
+/**
+ * dump_eeprom - dump the whole content of the EEPROM
+ */
+static void dump_eeprom(void)
+{
+ int i;
+ puts("EEPROM:\n");
+ for (i = 0; i < 7; ++i)
+ printf("%02x: 0x%02x\n", i, read_eeprom_reg(i));
+}
+
+/**
+ * smc911x_init - get the MAC/EEPROM up and ready for use
+ */
+static int smc911x_init(void)
+{
+ /* See if there is anything there */
+ if (!smc911x_detect_chip())
+ return 1;
+
+ smc911x_reset();
+
+ /* Make sure we set EEDIO/EECLK to the EEPROM */
+ if (reg_read(GPIO_CFG) & GPIO_CFG_EEPR_EN) {
+ while (reg_read(E2P_CMD) & E2P_CMD_EPC_BUSY)
+ if (smsc_ctrlc()) {
+ printf("init: timeout (E2P_CMD = 0x%08x)\n", reg_read(E2P_CMD));
+ return 1;
+ }
+ reg_write(GPIO_CFG, reg_read(GPIO_CFG) & ~GPIO_CFG_EEPR_EN);
+ }
+
+ return 0;
+}
+
+/**
+ * getline - consume a line of input and handle some escape sequences
+ */
+static char *getline(void)
+{
+ static char buffer[100];
+ char c;
+ size_t i;
+
+ i = 0;
+ while (1) {
+ buffer[i] = '\0';
+ while (!tstc())
+ continue;
+
+ c = getc();
+ /* Convert to uppercase */
+ if (c >= 'a' && c <= 'z')
+ c -= ('a' - 'A');
+
+ switch (c) {
+ case '\r': /* Enter/Return key */
+ case '\n':
+ puts("\n");
+ return buffer;
+
+ case 0x03: /* ^C - break */
+ return NULL;
+
+ case 0x5F:
+ case 0x08: /* ^H - backspace */
+ case 0x7F: /* DEL - backspace */
+ if (i) {
+ puts("\b \b");
+ i--;
+ }
+ break;
+
+ default:
+ /* Ignore control characters */
+ if (c < 0x20)
+ break;
+ /* Queue up all other characters */
+ buffer[i++] = c;
+ printf("%c", c);
+ break;
+ }
+ }
+}
+
+/**
+ * smc911x_eeprom - our application's main() function
+ */
+int smc911x_eeprom(int argc, char *argv[])
+{
+ /* Print the ABI version */
+ app_startup(argv);
+ if (XF_VERSION != get_version()) {
+ printf("Expects ABI version %d\n", XF_VERSION);
+ printf("Actual U-Boot ABI version %lu\n", get_version());
+ printf("Can't run\n\n");
+ return 1;
+ }
+
+ /* Initialize the MAC/EEPROM somewhat */
+ puts("\n");
+ if (smc911x_init())
+ return 1;
+
+ /* Dump helpful usage information */
+ puts("\n");
+ usage();
+ puts("\n");
+
+ while (1) {
+ char *line;
+
+ /* Send the prompt and wait for a line */
+ puts("eeprom> ");
+ line = getline();
+
+ /* Got a ctrl+c */
+ if (!line)
+ return 0;
+
+ /* Eat leading space */
+ line = skip_space(line);
+
+ /* Empty line, try again */
+ if (!line[0])
+ continue;
+
+ /* Only accept 1 letter commands */
+ if (line[0] && line[1] && line[1] != ' ' && line[1] != '\t')
+ goto unknown_cmd;
+
+ /* Now parse the command */
+ switch (line[0]) {
+ case 'W': write_stuff(line); break;
+ case 'D': dump_eeprom(); break;
+ case 'M': dump_regs(); break;
+ case 'C': copy_from_eeprom(); break;
+ case 'P': print_macaddr(); break;
+ unknown_cmd:
+ default: puts("ERROR: Unknown command!\n\n");
+ case '?':
+ case 'H': usage(); break;
+ case 'Q': return 0;
+ }
+ }
+}
+
+#else
+int smc911x_eeprom(int argc, char *argv[])
+{
+ puts("Not supported for this board\n");
+ return 1;
+}
+#endif
diff --git a/include/asm-arm/arch-mx31/mx31-regs.h b/include/asm-arm/arch-mx31/mx31-regs.h
index 3cdaa02..a8a05c8 100644
--- a/include/asm-arm/arch-mx31/mx31-regs.h
+++ b/include/asm-arm/arch-mx31/mx31-regs.h
@@ -134,7 +134,14 @@
#define MUX_CTL_CSPI2_SS0 0x85
#define MUX_CTL_CSPI2_SS1 0x86
#define MUX_CTL_CSPI2_SS2 0x87
+#define MUX_CTL_CSPI1_SS2 0x88
+#define MUX_CTL_CSPI1_SCLK 0x89
+#define MUX_CTL_CSPI1_SPI_RDY 0x8a
#define MUX_CTL_CSPI2_MOSI 0x8b
+#define MUX_CTL_CSPI1_MOSI 0x8c
+#define MUX_CTL_CSPI1_MISO 0x8d
+#define MUX_CTL_CSPI1_SS0 0x8e
+#define MUX_CTL_CSPI1_SS1 0x8f
/*
* Helper macros for the MUX_[contact name]__[pin function] macros
@@ -160,6 +167,15 @@
IOMUX_MODE(MUX_CTL_CSPI2_SPI_RDY, MUX_CTL_FUNC)
#define MUX_CSPI2_SCLK__CSPI2_CLK IOMUX_MODE(MUX_CTL_CSPI2_SCLK, MUX_CTL_FUNC)
+#define MUX_CSPI1_SS0__CSPI1_SS0_B IOMUX_MODE(MUX_CTL_CSPI1_SS0, MUX_CTL_FUNC)
+#define MUX_CSPI1_SS1__CSPI1_SS1_B IOMUX_MODE(MUX_CTL_CSPI1_SS1, MUX_CTL_FUNC)
+#define MUX_CSPI1_SS2__CSPI1_SS2_B IOMUX_MODE(MUX_CTL_CSPI1_SS2, MUX_CTL_FUNC)
+#define MUX_CSPI1_MOSI__CSPI1_MOSI IOMUX_MODE(MUX_CTL_CSPI1_MOSI, MUX_CTL_FUNC)
+#define MUX_CSPI1_MISO__CSPI1_MISO IOMUX_MODE(MUX_CTL_CSPI1_MISO, MUX_CTL_FUNC)
+#define MUX_CSPI1_SPI_RDY__CSPI1_DATAREADY_B \
+ IOMUX_MODE(MUX_CTL_CSPI1_SPI_RDY, MUX_CTL_FUNC)
+#define MUX_CSPI1_SCLK__CSPI1_CLK IOMUX_MODE(MUX_CTL_CSPI1_SCLK, MUX_CTL_FUNC)
+
#define MUX_CSPI2_MOSI__I2C2_SCL IOMUX_MODE(MUX_CTL_CSPI2_MOSI, MUX_CTL_ALT1)
#define MUX_CSPI2_MISO__I2C2_SDA IOMUX_MODE(MUX_CTL_CSPI2_MISO, MUX_CTL_ALT1)
diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
index 0552c27..1d475dde 100644
--- a/include/asm-arm/arch-mx31/mx31.h
+++ b/include/asm-arm/arch-mx31/mx31.h
@@ -27,4 +27,24 @@
extern u32 mx31_get_ipg_clk(void);
extern void mx31_gpio_mux(unsigned long mode);
+enum mx31_gpio_direction {
+ MX31_GPIO_DIRECTION_IN,
+ MX31_GPIO_DIRECTION_OUT,
+};
+
+#ifdef CONFIG_MX31_GPIO
+extern int mx31_gpio_direction(unsigned int gpio,
+ enum mx31_gpio_direction direction);
+extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
+#else
+static inline int mx31_gpio_direction(unsigned int gpio,
+ enum mx31_gpio_direction direction)
+{
+ return 1;
+}
+static inline void mx31_gpio_set(unsigned int gpio, unsigned int value)
+{
+}
+#endif
+
#endif /* __ASM_ARCH_MX31_H */
diff --git a/include/asm-ppc/config.h b/include/asm-ppc/config.h
index 275a7c8..0900f65 100644
--- a/include/asm-ppc/config.h
+++ b/include/asm-ppc/config.h
@@ -22,7 +22,7 @@
#define _ASM_CONFIG_H_
#ifndef CONFIG_MAX_MEM_MAPPED
-#if defined(CONFIG_4xx) || defined(CONFIG_E500)
+#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#else
#define CONFIG_MAX_MEM_MAPPED (256 << 20)
diff --git a/include/common.h b/include/common.h
index afee188..b75ea60 100644
--- a/include/common.h
+++ b/include/common.h
@@ -269,6 +269,7 @@ void forceenv (char *, char *);
#ifdef CONFIG_AUTO_COMPLETE
int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf);
#endif
+int get_env_id (void);
void pci_init (void);
void pci_init_board(void);
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index f0d28ee..2dd9e92 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -178,4 +178,27 @@
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
+/* EET platform additions */
+#ifdef CONFIG_IMX31_PHYCORE_EET
+#define BOARD_LATE_INIT
+
+#define CONFIG_MX31_GPIO 1
+
+#define CONFIG_HARD_SPI 1
+#define CONFIG_MXC_SPI 1
+#define CONFIG_CMD_SPI
+
+#define CONFIG_S6E63D6 1
+
+#define CONFIG_LCD 1
+#define CONFIG_VIDEO_MX3 1
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+#define LCD_BPP LCD_COLOR8
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+
+#define CONFIG_SPLASH_SCREEN 1
+#define CONFIG_CMD_BMP 1
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/lcd.h b/include/lcd.h
index 512221e..f054cac 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -148,14 +148,6 @@ typedef struct vidinfo {
extern vidinfo_t panel_info;
-#elif defined(CONFIG_MCC200)
-typedef struct vidinfo {
- ushort vl_col; /* Number of columns (i.e. 160) */
- ushort vl_row; /* Number of rows (i.e. 100) */
-
- u_char vl_bpix; /* Bits per pixel, 0 = 1 */
-} vidinfo_t;
-
#elif defined(CONFIG_ATMEL_LCD)
typedef struct vidinfo {
@@ -183,6 +175,19 @@ typedef struct vidinfo {
extern vidinfo_t panel_info;
+#else
+
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+
+ u_char vl_bpix; /* Bits per pixel, 0 = 1 */
+
+ ushort *cmap; /* Pointer to the colormap */
+
+ void *priv; /* Pointer to driver-specific data */
+} vidinfo_t;
+
#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
/* Video functions */
diff --git a/include/s6e63d6.h b/include/s6e63d6.h
new file mode 100644
index 0000000..9f17fc0
--- /dev/null
+++ b/include/s6e63d6.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _S6E63D6_H_
+#define _S6E63D6_H_
+
+struct s6e63d6 {
+ unsigned int bus;
+ unsigned int cs;
+ unsigned int id;
+ struct spi_slave *slave;
+};
+
+extern int s6e63d6_init(struct s6e63d6 *data);
+extern int s6e63d6_index(struct s6e63d6 *data, u8 idx);
+extern int s6e63d6_param(struct s6e63d6 *data, u16 param);
+
+#endif
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 375b091..6d29303 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -340,9 +340,6 @@ init_fnc_t *init_sequence[] = {
init_func_spi,
#endif
#ifdef CONFIG_POST
-#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
- dtt_init,
-#endif
post_init_f,
#endif
INIT_FUNC_WATCHDOG_RESET
@@ -1072,7 +1069,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
WATCHDOG_RESET ();
-#if defined(CONFIG_DTT) && !defined(CONFIG_POST)
+#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
dtt_init ();
#endif
#if defined(CONFIG_CMD_SCSI)
diff --git a/net/eth.c b/net/eth.c
index ec2ef1a..217e885 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -28,6 +28,9 @@
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+static char *act = NULL;
+static int env_changed_id = 0;
+
/*
* CPU and board-specific Ethernet initializations. Aliased function
* signals caller to move on
@@ -461,13 +464,17 @@ void eth_try_another(int first_restart)
#ifdef CONFIG_NET_MULTI
void eth_set_current(void)
{
- char *act;
struct eth_device* old_current;
+ int env_id;
if (!eth_current) /* XXX no current */
return;
- act = getenv("ethact");
+ env_id = get_env_id();
+ if ((act == NULL) || (env_changed_id != env_id)) {
+ act = getenv("ethact");
+ env_changed_id = env_id;
+ }
if (act != NULL) {
old_current = eth_current;
do {
diff --git a/net/net.c b/net/net.c
index 459baf4..a55f4d3 100644
--- a/net/net.c
+++ b/net/net.c
@@ -209,6 +209,8 @@ uchar NetArpWaitPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
ulong NetArpWaitTimerStart;
int NetArpWaitTry;
+int env_changed_id = 0;
+
void ArpRequest (void)
{
int i;
@@ -276,6 +278,78 @@ void ArpTimeoutCheck(void)
}
}
+int
+NetInitLoop(proto_t protocol)
+{
+ bd_t *bd = gd->bd;
+ int env_id = get_env_id ();
+
+ /* update only when the environment has changed */
+ if (env_changed_id == env_id)
+ return 0;
+
+ switch (protocol) {
+#if defined(CONFIG_CMD_NFS)
+ case NFS:
+#endif
+#if defined(CONFIG_CMD_PING)
+ case PING:
+#endif
+#if defined(CONFIG_CMD_SNTP)
+ case SNTP:
+#endif
+ case NETCONS:
+ case TFTP:
+ NetCopyIP(&NetOurIP, &bd->bi_ip_addr);
+ NetOurGatewayIP = getenv_IPaddr ("gatewayip");
+ NetOurSubnetMask= getenv_IPaddr ("netmask");
+ NetOurVLAN = getenv_VLAN("vlan");
+ NetOurNativeVLAN = getenv_VLAN("nvlan");
+
+ switch (protocol) {
+#if defined(CONFIG_CMD_NFS)
+ case NFS:
+#endif
+ case NETCONS:
+ case TFTP:
+ NetServerIP = getenv_IPaddr ("serverip");
+ break;
+#if defined(CONFIG_CMD_PING)
+ case PING:
+ /* nothing */
+ break;
+#endif
+#if defined(CONFIG_CMD_SNTP)
+ case SNTP:
+ /* nothing */
+ break;
+#endif
+ default:
+ break;
+ }
+
+ break;
+ case BOOTP:
+ case RARP:
+ /*
+ * initialize our IP addr to 0 in order to accept ANY
+ * IP addr assigned to us by the BOOTP / RARP server
+ */
+ NetOurIP = 0;
+ NetServerIP = getenv_IPaddr ("serverip");
+ NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
+ NetOurNativeVLAN = getenv_VLAN("nvlan");
+ case CDP:
+ NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
+ NetOurNativeVLAN = getenv_VLAN("nvlan");
+ break;
+ default:
+ break;
+ }
+ env_changed_id = env_id;
+ return 0;
+}
+
/**********************************************************************/
/*
* Main network processing loop.
@@ -340,65 +414,7 @@ restart:
* here on, this code is a state machine driven by received
* packets and timer events.
*/
-
- switch (protocol) {
-#if defined(CONFIG_CMD_NFS)
- case NFS:
-#endif
-#if defined(CONFIG_CMD_PING)
- case PING:
-#endif
-#if defined(CONFIG_CMD_SNTP)
- case SNTP:
-#endif
- case NETCONS:
- case TFTP:
- NetCopyIP(&NetOurIP, &bd->bi_ip_addr);
- NetOurGatewayIP = getenv_IPaddr ("gatewayip");
- NetOurSubnetMask= getenv_IPaddr ("netmask");
- NetOurVLAN = getenv_VLAN("vlan");
- NetOurNativeVLAN = getenv_VLAN("nvlan");
-
- switch (protocol) {
-#if defined(CONFIG_CMD_NFS)
- case NFS:
-#endif
- case NETCONS:
- case TFTP:
- NetServerIP = getenv_IPaddr ("serverip");
- break;
-#if defined(CONFIG_CMD_PING)
- case PING:
- /* nothing */
- break;
-#endif
-#if defined(CONFIG_CMD_SNTP)
- case SNTP:
- /* nothing */
- break;
-#endif
- default:
- break;
- }
-
- break;
- case BOOTP:
- case RARP:
- /*
- * initialize our IP addr to 0 in order to accept ANY
- * IP addr assigned to us by the BOOTP / RARP server
- */
- NetOurIP = 0;
- NetServerIP = getenv_IPaddr ("serverip");
- NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
- NetOurNativeVLAN = getenv_VLAN("nvlan");
- case CDP:
- NetOurVLAN = getenv_VLAN("vlan"); /* VLANs must be read */
- NetOurNativeVLAN = getenv_VLAN("nvlan");
- break;
- default:
- break;
- }
+ NetInitLoop(protocol);
switch (net_check_prereq (protocol)) {
case 1: