summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--cpu/mpc8260/commproc.c209
-rw-r--r--include/asm-ppc/cpm_8260.h740
-rw-r--r--post/uart.c583
3 files changed, 1532 insertions, 0 deletions
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
new file mode 100644
index 0000000..dcbffc4
--- /dev/null
+++ b/cpu/mpc8260/commproc.c
@@ -0,0 +1,209 @@
+/*
+ * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
+ * copyright notice:
+ *
+ * General Purpose functions for the global management of the
+ * 8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
+ * 2.3.99 Updates
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space. The allocator for that is here. When the communication
+ * process is reset, we reclaim the memory available. There is
+ * currently no deallocator for this memory.
+ */
+#include <common.h>
+#include <asm/cpm_8260.h>
+
+/*
+ * because we have stack and init data in dual port ram
+ * we must reduce the size
+ */
+#undef CPM_DATAONLY_SIZE
+#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
+
+void
+m8260_cpm_reset(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile ulong count;
+
+ /* Reclaim the DP memory for our use.
+ */
+ gd->dp_alloc_base = CPM_DATAONLY_BASE;
+ gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
+
+ /*
+ * Reset CPM
+ */
+ immr->im_cpm.cp_cpcr = CPM_CR_RST;
+ count = 0;
+ do { /* Spin until command processed */
+ __asm__ __volatile__ ("eieio");
+ } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
+
+#ifdef CONFIG_HARD_I2C
+ *((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
+#endif
+}
+
+/* Allocate some memory from the dual ported ram.
+ * To help protocols with object alignment restrictions, we do that
+ * if they ask.
+ */
+uint
+m8260_cpm_dpalloc(uint size, uint align)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ uint retloc;
+ uint align_mask, off;
+ uint savebase;
+
+ align_mask = align - 1;
+ savebase = gd->dp_alloc_base;
+
+ if ((off = (gd->dp_alloc_base & align_mask)) != 0)
+ gd->dp_alloc_base += (align - off);
+
+ if ((off = size & align_mask) != 0)
+ size += align - off;
+
+ if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
+ gd->dp_alloc_base = savebase;
+ panic("m8260_cpm_dpalloc: ran out of dual port ram!");
+ }
+
+ retloc = gd->dp_alloc_base;
+ gd->dp_alloc_base += size;
+
+ memset((void *)&immr->im_dprambase[retloc], 0, size);
+
+ return(retloc);
+}
+
+/* We also own one page of host buffer space for the allocation of
+ * UART "fifos" and the like.
+ */
+uint
+m8260_cpm_hostalloc(uint size, uint align)
+{
+ /* the host might not even have RAM yet - just use dual port RAM */
+ return (m8260_cpm_dpalloc(size, align));
+}
+
+/* Set a baud rate generator. This needs lots of work. There are
+ * eight BRGs, which can be connected to the CPM channels or output
+ * as clocks. The BRGs are in two different block of internal
+ * memory mapped space.
+ * The baud rate clock is the system clock divided by something.
+ * It was set up long ago during the initial boot phase and is
+ * is given to us.
+ * Baud rate clocks are zero-based in the driver code (as that maps
+ * to port numbers). Documentation uses 1-based numbering.
+ */
+#define BRG_INT_CLK gd->brg_clk
+#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+void
+m8260_cpm_setbrg(uint brg, uint rate)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+void
+m8260_cpm_fastbrg(uint brg, uint rate, int div16)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile uint *bp;
+
+ /* This is good enough to get SMCs running.....
+ */
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (div16)
+ *bp |= CPM_BRG_DIV16;
+}
+
+/* This function is used to set baud rate generators using an external
+ * clock source and 16x oversampling.
+ */
+
+void
+m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
+{
+ volatile immap_t *immr = (immap_t *)CFG_IMMR;
+ volatile uint *bp;
+
+ if (brg < 4) {
+ bp = (uint *)&immr->im_brgc1;
+ }
+ else {
+ bp = (uint *)&immr->im_brgc5;
+ brg -= 4;
+ }
+ bp += brg;
+ *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
+ if (pinsel == 0)
+ *bp |= CPM_BRG_EXTC_CLK3_9;
+ else
+ *bp |= CPM_BRG_EXTC_CLK5_15;
+}
+
+#ifdef CONFIG_POST
+
+void post_word_store (ulong a)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+
+ *save_addr = a;
+}
+
+ulong post_word_load (void)
+{
+ volatile ulong *save_addr =
+ (volatile ulong *)(CFG_IMMR + CPM_POST_WORD_ADDR);
+
+ return *save_addr;
+}
+
+#endif /* CONFIG_POST */
diff --git a/include/asm-ppc/cpm_8260.h b/include/asm-ppc/cpm_8260.h
new file mode 100644
index 0000000..2145180
--- /dev/null
+++ b/include/asm-ppc/cpm_8260.h
@@ -0,0 +1,740 @@
+
+/*
+ * MPC8260 Communication Processor Module.
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the MPC8260 internal
+ * memory map. See immap.h for details.
+ */
+#ifndef __CPM_82XX__
+#define __CPM_82XX__
+
+#include <asm/immap_8260.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST ((uint)0x80000000)
+#define CPM_CR_PAGE ((uint)0x7c000000)
+#define CPM_CR_SBLOCK ((uint)0x03e00000)
+#define CPM_CR_FLG ((uint)0x00010000)
+#define CPM_CR_MCN ((uint)0x00003fc0)
+#define CPM_CR_OPCODE ((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK (0x04)
+#define CPM_CR_SCC2_SBLOCK (0x05)
+#define CPM_CR_SCC3_SBLOCK (0x06)
+#define CPM_CR_SCC4_SBLOCK (0x07)
+#define CPM_CR_SMC1_SBLOCK (0x08)
+#define CPM_CR_SMC2_SBLOCK (0x09)
+#define CPM_CR_SPI_SBLOCK (0x0a)
+#define CPM_CR_I2C_SBLOCK (0x0b)
+#define CPM_CR_TIMER_SBLOCK (0x0f)
+#define CPM_CR_RAND_SBLOCK (0x0e)
+#define CPM_CR_FCC1_SBLOCK (0x10)
+#define CPM_CR_FCC2_SBLOCK (0x11)
+#define CPM_CR_FCC3_SBLOCK (0x12)
+#define CPM_CR_IDMA1_SBLOCK (0x14)
+#define CPM_CR_IDMA2_SBLOCK (0x15)
+#define CPM_CR_IDMA3_SBLOCK (0x16)
+#define CPM_CR_IDMA4_SBLOCK (0x17)
+#define CPM_CR_MCC1_SBLOCK (0x1c)
+
+#define CPM_CR_SCC1_PAGE (0x00)
+#define CPM_CR_SCC2_PAGE (0x01)
+#define CPM_CR_SCC3_PAGE (0x02)
+#define CPM_CR_SCC4_PAGE (0x03)
+#define CPM_CR_SMC1_PAGE (0x07)
+#define CPM_CR_SMC2_PAGE (0x08)
+#define CPM_CR_SPI_PAGE (0x09)
+#define CPM_CR_I2C_PAGE (0x0a)
+#define CPM_CR_TIMER_PAGE (0x0a)
+#define CPM_CR_RAND_PAGE (0x0a)
+#define CPM_CR_FCC1_PAGE (0x04)
+#define CPM_CR_FCC2_PAGE (0x05)
+#define CPM_CR_FCC3_PAGE (0x06)
+#define CPM_CR_IDMA1_PAGE (0x07)
+#define CPM_CR_IDMA2_PAGE (0x08)
+#define CPM_CR_IDMA3_PAGE (0x09)
+#define CPM_CR_IDMA4_PAGE (0x0a)
+#define CPM_CR_MCC1_PAGE (0x07)
+#define CPM_CR_MCC2_PAGE (0x08)
+
+/* Some opcodes (there are more...later)
+*/
+#define CPM_CR_INIT_TRX ((ushort)0x0000)
+#define CPM_CR_INIT_RX ((ushort)0x0001)
+#define CPM_CR_INIT_TX ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE ((ushort)0x0003)
+#define CPM_CR_STOP_TX ((ushort)0x0004)
+#define CPM_CR_RESTART_TX ((ushort)0x0006)
+#define CPM_CR_SET_GADDR ((ushort)0x0008)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+ ((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* Dual Port RAM addresses. The first 16K is available for almost
+ * any CPM use, so we put the BDs there. The first 128 bytes are
+ * used for SMC1 and SMC2 parameter RAM, so we start allocating
+ * BDs above that. All of this must change when we start
+ * downloading RAM microcode.
+ */
+#define CPM_DATAONLY_BASE ((uint)128)
+#define CPM_DATAONLY_SIZE ((uint)(16 * 1024) - CPM_DATAONLY_BASE)
+#define CPM_DP_NOSPACE ((uint)0x7fffffff)
+#define CPM_FCC_SPECIAL_BASE ((uint)0x0000b000)
+
+/* The number of pages of host memory we allocate for CPM. This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES 2
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8260_t *cpmp; /* Pointer to comm processor */
+uint m8260_cpm_dpalloc(uint size, uint align);
+uint m8260_cpm_hostalloc(uint size, uint align);
+void m8260_cpm_setbrg(uint brg, uint rate);
+void m8260_cpm_fastbrg(uint brg, uint rate, int div16);
+void m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel);
+
+/* Buffer descriptors used by many of the CPM protocols.
+*/
+typedef struct cpm_buf_desc {
+ ushort cbd_sc; /* Status and Control */
+ ushort cbd_datlen; /* Data length in buffer */
+ uint cbd_bufaddr; /* Buffer address in host memory */
+} cbd_t;
+
+#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */
+#define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */
+#define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */
+#define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */
+#define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame */
+#define BD_SC_CM ((ushort)0x0200) /* Continous mode */
+#define BD_SC_ID ((ushort)0x0100) /* Rec'd too many idles */
+#define BD_SC_P ((ushort)0x0100) /* xmt preamble */
+#define BD_SC_BR ((ushort)0x0020) /* Break received */
+#define BD_SC_FR ((ushort)0x0010) /* Framing error */
+#define BD_SC_PR ((ushort)0x0008) /* Parity error */
+#define BD_SC_OV ((ushort)0x0002) /* Overrun */
+#define BD_SC_CD ((ushort)0x0001) /* ?? */
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */
+#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */
+#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */
+#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */
+#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define CPM_POST_WORD_ADDR 0x80FC /* steal a long at the end of SCC1 */
+#define PROFF_SCC1 ((uint)0x8000)
+#define PROFF_SCC2 ((uint)0x8100)
+#define PROFF_SCC3 ((uint)0x8200)
+#define PROFF_SCC4 ((uint)0x8300)
+#define PROFF_FCC1 ((uint)0x8400)
+#define PROFF_FCC2 ((uint)0x8500)
+#define PROFF_FCC3 ((uint)0x8600)
+#define PROFF_MCC1 ((uint)0x8700)
+#define PROFF_SMC1_BASE ((uint)0x87fc)
+#define PROFF_IDMA1_BASE ((uint)0x87fe)
+#define PROFF_MCC2 ((uint)0x8800)
+#define PROFF_SMC2_BASE ((uint)0x88fc)
+#define PROFF_IDMA2_BASE ((uint)0x88fe)
+#define PROFF_SPI_BASE ((uint)0x89fc)
+#define PROFF_IDMA3_BASE ((uint)0x89fe)
+#define PROFF_TIMERS ((uint)0x8ae0)
+#define PROFF_REVNUM ((uint)0x8af0)
+#define PROFF_RAND ((uint)0x8af8)
+#define PROFF_I2C_BASE ((uint)0x8afc)
+#define PROFF_IDMA4_BASE ((uint)0x8afe)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1 (0)
+#define PROFF_SMC2 (64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+ ushort smc_rbase; /* Rx Buffer descriptor base address */
+ ushort smc_tbase; /* Tx Buffer descriptor base address */
+ u_char smc_rfcr; /* Rx function code */
+ u_char smc_tfcr; /* Tx function code */
+ ushort smc_mrblr; /* Max receive buffer length */
+ uint smc_rstate; /* Internal */
+ uint smc_idp; /* Internal */
+ ushort smc_rbptr; /* Internal */
+ ushort smc_ibc; /* Internal */
+ uint smc_rxtmp; /* Internal */
+ uint smc_tstate; /* Internal */
+ uint smc_tdp; /* Internal */
+ ushort smc_tbptr; /* Internal */
+ ushort smc_tbc; /* Internal */
+ uint smc_txtmp; /* Internal */
+ ushort smc_maxidl; /* Maximum idle characters */
+ ushort smc_tmpidl; /* Temporary idle counter */
+ ushort smc_brklen; /* Last received break length */
+ ushort smc_brkec; /* rcv'd break condition counter */
+ ushort smc_brkcr; /* xmt break count register */
+ ushort smc_rmask; /* Temporary bit mask */
+ uint smc_stmp; /* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN ((ushort)0x0001)
+#define SMCMR_TEN ((ushort)0x0002)
+#define SMCMR_DM ((ushort)0x000c)
+#define SMCMR_SM_GCI ((ushort)0x0000)
+#define SMCMR_SM_UART ((ushort)0x0020)
+#define SMCMR_SM_TRANS ((ushort)0x0030)
+#define SMCMR_SM_MASK ((ushort)0x0030)
+#define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */
+#define SMCMR_REVD SMCMR_PM_EVEN
+#define SMCMR_PEN ((ushort)0x0200) /* Parity enable */
+#define SMCMR_BS SMCMR_PEN
+#define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */
+#define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_TXE ((unsigned char)0x10)
+#define SMCM_BSY ((unsigned char)0x04)
+#define SMCM_TX ((unsigned char)0x02)
+#define SMCM_RX ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST ((uint)0x00020000)
+#define CPM_BRG_EN ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9 ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15 ((uint)0x00008000)
+#define CPM_BRG_ATB ((uint)0x00002000)
+#define CPM_BRG_CD_MASK ((uint)0x00001ffe)
+#define CPM_BRG_DIV16 ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP ((uint)0x00040000)
+#define SCC_GSMRH_GDE ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000)
+#define SCC_GSMRH_REVD ((uint)0x00002000)
+#define SCC_GSMRH_TRX ((uint)0x00001000)
+#define SCC_GSMRH_TTX ((uint)0x00000800)
+#define SCC_GSMRH_CDP ((uint)0x00000400)
+#define SCC_GSMRH_CTSP ((uint)0x00000200)
+#define SCC_GSMRH_CDS ((uint)0x00000100)
+#define SCC_GSMRH_CTSS ((uint)0x00000080)
+#define SCC_GSMRH_TFL ((uint)0x00000040)
+#define SCC_GSMRH_RFW ((uint)0x00000020)
+#define SCC_GSMRH_TXSY ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16 ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8 ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4 ((uint)0x00000004)
+#define SCC_GSMRH_RTSM ((uint)0x00000002)
+#define SCC_GSMRH_RSYN ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000)
+#define SCC_GSMRL_TCI ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3 ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4 ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14 ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF ((uint)0x00000000)
+#define SCC_GSMRL_RINV ((uint)0x02000000)
+#define SCC_GSMRL_TINV ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128 ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64 ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48 ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32 ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16 ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8 ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01 ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10 ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000)
+#define SCC_GSMRL_TEND ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32 ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16 ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8 ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32 ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16 ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8 ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1 ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0 ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0 ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM ((uint)0x00000000)
+#define SCC_GSMRL_ENR ((uint)0x00000020)
+#define SCC_GSMRL_ENT ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14 ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7 ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC ((uint)0x00000000)
+
+#define SCC_TODR_TOD ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE ((unsigned char)0x10)
+#define SCCM_BSY ((unsigned char)0x04)
+#define SCCM_TX ((unsigned char)0x02)
+#define SCCM_RX ((unsigned char)0x01)
+
+typedef struct scc_param {
+ ushort scc_rbase; /* Rx Buffer descriptor base address */
+ ushort scc_tbase; /* Tx Buffer descriptor base address */
+ u_char scc_rfcr; /* Rx function code */
+ u_char scc_tfcr; /* Tx function code */
+ ushort scc_mrblr; /* Max receive buffer length */
+ uint scc_rstate; /* Internal */
+ uint scc_idp; /* Internal */
+ ushort scc_rbptr; /* Internal */
+ ushort scc_ibc; /* Internal */
+ uint scc_rxtmp; /* Internal */
+ uint scc_tstate; /* Internal */
+ uint scc_tdp; /* Internal */
+ ushort scc_tbptr; /* Internal */
+ ushort scc_tbc; /* Internal */
+ uint scc_txtmp; /* Internal */
+ uint scc_rcrc; /* Internal */
+ uint scc_tcrc; /* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+ sccp_t sen_genscc;
+ uint sen_cpres; /* Preset CRC */
+ uint sen_cmask; /* Constant mask for CRC */
+ uint sen_crcec; /* CRC Error counter */
+ uint sen_alec; /* alignment error counter */
+ uint sen_disfc; /* discard frame counter */
+ ushort sen_pads; /* Tx short frame pad character */
+ ushort sen_retlim; /* Retry limit threshold */
+ ushort sen_retcnt; /* Retry limit counter */
+ ushort sen_maxflr; /* maximum frame length register */
+ ushort sen_minflr; /* minimum frame length register */
+ ushort sen_maxd1; /* maximum DMA1 length */
+ ushort sen_maxd2; /* maximum DMA2 length */
+ ushort sen_maxd; /* Rx max DMA */
+ ushort sen_dmacnt; /* Rx DMA counter */
+ ushort sen_maxb; /* Max BD byte count */
+ ushort sen_gaddr1; /* Group address filter */
+ ushort sen_gaddr2;
+ ushort sen_gaddr3;
+ ushort sen_gaddr4;
+ uint sen_tbuf0data0; /* Save area 0 - current frame */
+ uint sen_tbuf0data1; /* Save area 1 - current frame */
+ uint sen_tbuf0rba; /* Internal */
+ uint sen_tbuf0crc; /* Internal */
+ ushort sen_tbuf0bcnt; /* Internal */
+ ushort sen_paddrh; /* physical address (MSB) */
+ ushort sen_paddrm;
+ ushort sen_paddrl; /* physical address (LSB) */
+ ushort sen_pper; /* persistence */
+ ushort sen_rfbdptr; /* Rx first BD pointer */
+ ushort sen_tfbdptr; /* Tx first BD pointer */
+ ushort sen_tlbdptr; /* Tx last BD pointer */
+ uint sen_tbuf1data0; /* Save area 0 - current frame */
+ uint sen_tbuf1data1; /* Save area 1 - current frame */
+ uint sen_tbuf1rba; /* Internal */
+ uint sen_tbuf1crc; /* Internal */
+ ushort sen_tbuf1bcnt; /* Internal */
+ ushort sen_txlen; /* Tx Frame length counter */
+ ushort sen_iaddr1; /* Individual address filter */
+ ushort sen_iaddr2;
+ ushort sen_iaddr3;
+ ushort sen_iaddr4;
+ ushort sen_boffcnt; /* Backoff counter */
+
+ /* NOTE: Some versions of the manual have the following items
+ * incorrectly documented. Below is the proper order.
+ */
+ ushort sen_taddrh; /* temp address (MSB) */
+ ushort sen_taddrm;
+ ushort sen_taddrl; /* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */
+#define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC ((ushort)0x8000) /* Enable heartbeat */
+#define SCC_PSMR_FC ((ushort)0x4000) /* Force collision */
+#define SCC_PSMR_RSH ((ushort)0x2000) /* Receive short frames */
+#define SCC_PSMR_IAM ((ushort)0x1000) /* Check individual hash */
+#define SCC_PSMR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */
+#define SCC_PSMR_PRO ((ushort)0x0200) /* Promiscuous mode */
+#define SCC_PSMR_BRO ((ushort)0x0100) /* Catch broadcast pkts */
+#define SCC_PSMR_SBT ((ushort)0x0080) /* Special backoff timer */
+#define SCC_PSMR_LPB ((ushort)0x0040) /* Set Loopback mode */
+#define SCC_PSMR_SIP ((ushort)0x0020) /* Sample Input Pins */
+#define SCC_PSMR_LCW ((ushort)0x0010) /* Late collision window */
+#define SCC_PSMR_NIB22 ((ushort)0x000a) /* Start frame search */
+#define SCC_PSMR_FDE ((ushort)0x0001) /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY ((ushort)0x8000)
+#define BD_ENET_RX_WRAP ((ushort)0x2000)
+#define BD_ENET_RX_INTR ((ushort)0x1000)
+#define BD_ENET_RX_LAST ((ushort)0x0800)
+#define BD_ENET_RX_FIRST ((ushort)0x0400)
+#define BD_ENET_RX_MISS ((ushort)0x0100)
+#define BD_ENET_RX_BC ((ushort)0x0080) /* FCC Only */
+#define BD_ENET_RX_MC ((ushort)0x0040) /* FCC Only */
+#define BD_ENET_RX_LG ((ushort)0x0020)
+#define BD_ENET_RX_NO ((ushort)0x0010)
+#define BD_ENET_RX_SH ((ushort)0x0008)
+#define BD_ENET_RX_CR ((ushort)0x0004)
+#define BD_ENET_RX_OV ((ushort)0x0002)
+#define BD_ENET_RX_CL ((ushort)0x0001)
+#define BD_ENET_RX_STATS ((ushort)0x01ff) /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY ((ushort)0x8000)
+#define BD_ENET_TX_PAD ((ushort)0x4000)
+#define BD_ENET_TX_WRAP ((ushort)0x2000)
+#define BD_ENET_TX_INTR ((ushort)0x1000)
+#define BD_ENET_TX_LAST ((ushort)0x0800)
+#define BD_ENET_TX_TC ((ushort)0x0400)
+#define BD_ENET_TX_DEF ((ushort)0x0200)
+#define BD_ENET_TX_HB ((ushort)0x0100)
+#define BD_ENET_TX_LC ((ushort)0x0080)
+#define BD_ENET_TX_RL ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK ((ushort)0x003c)
+#define BD_ENET_TX_UN ((ushort)0x0002)
+#define BD_ENET_TX_CSL ((ushort)0x0001)
+#define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+ sccp_t scc_genscc;
+ uint scc_res1; /* Reserved */
+ uint scc_res2; /* Reserved */
+ ushort scc_maxidl; /* Maximum idle chars */
+ ushort scc_idlc; /* temp idle counter */
+ ushort scc_brkcr; /* Break count register */
+ ushort scc_parec; /* receive parity error counter */
+ ushort scc_frmec; /* receive framing error counter */
+ ushort scc_nosec; /* receive noise counter */
+ ushort scc_brkec; /* receive break condition counter */
+ ushort scc_brkln; /* last received break length */
+ ushort scc_uaddr1; /* UART address character 1 */
+ ushort scc_uaddr2; /* UART address character 2 */
+ ushort scc_rtemp; /* Temp storage */
+ ushort scc_toseq; /* Transmit out of sequence char */
+ ushort scc_char1; /* control character 1 */
+ ushort scc_char2; /* control character 2 */
+ ushort scc_char3; /* control character 3 */
+ ushort scc_char4; /* control character 4 */
+ ushort scc_char5; /* control character 5 */
+ ushort scc_char6; /* control character 6 */
+ ushort scc_char7; /* control character 7 */
+ ushort scc_char8; /* control character 8 */
+ ushort scc_rccm; /* receive control character mask */
+ ushort scc_rccr; /* receive control character register */
+ ushort scc_rlbc; /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR ((ushort)0x1000)
+#define UART_SCCM_GLT ((ushort)0x0800)
+#define UART_SCCM_AB ((ushort)0x0200)
+#define UART_SCCM_IDL ((ushort)0x0100)
+#define UART_SCCM_GRA ((ushort)0x0080)
+#define UART_SCCM_BRKE ((ushort)0x0040)
+#define UART_SCCM_BRKS ((ushort)0x0020)
+#define UART_SCCM_CCR ((ushort)0x0008)
+#define UART_SCCM_BSY ((ushort)0x0004)
+#define UART_SCCM_TX ((ushort)0x0002)
+#define UART_SCCM_RX ((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC ((ushort)0x8000)
+#define SCU_PSMR_SL ((ushort)0x4000)
+#define SCU_PSMR_CL ((ushort)0x3000)
+#define SCU_PSMR_UM ((ushort)0x0c00)
+#define SCU_PSMR_FRZ ((ushort)0x0200)
+#define SCU_PSMR_RZS ((ushort)0x0100)
+#define SCU_PSMR_SYN ((ushort)0x0080)
+#define SCU_PSMR_DRT ((ushort)0x0040)
+#define SCU_PSMR_PEN ((ushort)0x0010)
+#define SCU_PSMR_RPM ((ushort)0x000c)
+#define SCU_PSMR_REVP ((ushort)0x0008)
+#define SCU_PSMR_TPM ((ushort)0x0003)
+#define SCU_PSMR_TEVP ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+ sccp_t st_genscc;
+ uint st_cpres; /* Preset CRC */
+ uint st_cmask; /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST ((ushort)0x0800)
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM ((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE ((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE ((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE ((uint)0xc0000000)
+#define FCC_GFMR_TCI ((uint)0x20000000)
+#define FCC_GFMR_TRX ((uint)0x10000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_TTX ((uint)0x08000000)
+#define FCC_GFMR_CDP ((uint)0x04000000)
+#define FCC_GFMR_CTSP ((uint)0x02000000)
+#define FCC_GFMR_CDS ((uint)0x01000000)
+#define FCC_GFMR_CTSS ((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE ((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO ((uint)0x00004000)
+#define FCC_GFMR_SYNL_8 ((uint)0x00008000)
+#define FCC_GFMR_SYNL_16 ((uint)0x0000c000)
+#define FCC_GFMR_RTSM ((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI ((uint)0x00000800)
+#define FCC_GFMR_REVD ((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ ((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI ((uint)0x00000100)
+#define FCC_GFMR_TCRC_16 ((uint)0x00000000)
+#define FCC_GFMR_TCRC_32 ((uint)0x00000080)
+#define FCC_GFMR_ENR ((uint)0x00000020)
+#define FCC_GFMR_ENT ((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET ((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM ((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC ((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+ ushort fcc_riptr; /* Rx Internal temp pointer */
+ ushort fcc_tiptr; /* Tx Internal temp pointer */
+ ushort fcc_res1;
+ ushort fcc_mrblr; /* Max receive buffer length, mod 32 bytes */
+ uint fcc_rstate; /* Upper byte is Func code, must be set */
+ uint fcc_rbase; /* Receive BD base */
+ ushort fcc_rbdstat; /* RxBD status */
+ ushort fcc_rbdlen; /* RxBD down counter */
+ uint fcc_rdptr; /* RxBD internal data pointer */
+ uint fcc_tstate; /* Upper byte is Func code, must be set */
+ uint fcc_tbase; /* Transmit BD base */
+ ushort fcc_tbdstat; /* TxBD status */
+ ushort fcc_tbdlen; /* TxBD down counter */
+ uint fcc_tdptr; /* TxBD internal data pointer */
+ uint fcc_rbptr; /* Rx BD Internal buf pointer */
+ uint fcc_tbptr; /* Tx BD Internal buf pointer */
+ uint fcc_rcrc; /* Rx temp CRC */
+ uint fcc_res2;
+ uint fcc_tcrc; /* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+ fccp_t fen_genfcc;
+ uint fen_statbuf; /* Internal status buffer */
+ uint fen_camptr; /* CAM address */
+ uint fen_cmask; /* Constant mask for CRC */
+ uint fen_cpres; /* Preset CRC */
+ uint fen_crcec; /* CRC Error counter */
+ uint fen_alec; /* alignment error counter */
+ uint fen_disfc; /* discard frame counter */
+ ushort fen_retlim; /* Retry limit */
+ ushort fen_retcnt; /* Retry counter */
+ ushort fen_pper; /* Persistence */
+ ushort fen_boffcnt; /* backoff counter */
+ uint fen_gaddrh; /* Group address filter, high 32-bits */
+ uint fen_gaddrl; /* Group address filter, low 32-bits */
+ ushort fen_tfcstat; /* out of sequence TxBD */
+ ushort fen_tfclen;
+ uint fen_tfcptr;
+ ushort fen_mflr; /* Maximum frame length (1518) */
+ ushort fen_paddrh; /* MAC address */
+ ushort fen_paddrm;
+ ushort fen_paddrl;
+ ushort fen_ibdcount; /* Internal BD counter */
+ ushort fen_idbstart; /* Internal BD start pointer */
+ ushort fen_ibdend; /* Internal BD end pointer */
+ ushort fen_txlen; /* Internal Tx frame length counter */
+ uint fen_ibdbase[8]; /* Internal use */
+ uint fen_iaddrh; /* Individual address filter */
+ uint fen_iaddrl;
+ ushort fen_minflr; /* Minimum frame length (64) */
+ ushort fen_taddrh; /* Filter transfer MAC address */
+ ushort fen_taddrm;
+ ushort fen_taddrl;
+ ushort fen_padptr; /* Pointer to pad byte buffer */
+ ushort fen_cftype; /* control frame type */
+ ushort fen_cfrange; /* control frame range */
+ ushort fen_maxb; /* maximum BD count */
+ ushort fen_maxd1; /* Max DMA1 length (1520) */
+ ushort fen_maxd2; /* Max DMA2 length (1520) */
+ ushort fen_maxd; /* internal max DMA count */
+ ushort fen_dmacnt; /* internal DMA counter */
+ uint fen_octc; /* Total octect counter */
+ uint fen_colc; /* Total collision counter */
+ uint fen_broc; /* Total broadcast packet counter */
+ uint fen_mulc; /* Total multicast packet count */
+ uint fen_uspc; /* Total packets < 64 bytes */
+ uint fen_frgc; /* Total packets < 64 bytes with errors */
+ uint fen_ospc; /* Total packets > 1518 */
+ uint fen_jbrc; /* Total packets > 1518 with errors */
+ uint fen_p64c; /* Total packets == 64 bytes */
+ uint fen_p65c; /* Total packets 64 < bytes <= 127 */
+ uint fen_p128c; /* Total packets 127 < bytes <= 255 */
+ uint fen_p256c; /* Total packets 256 < bytes <= 511 */
+ uint fen_p512c; /* Total packets 512 < bytes <= 1023 */
+ uint fen_p1024c; /* Total packets 1024 < bytes <= 1518 */
+ uint fen_cambuf; /* Internal CAM buffer poiner */
+ ushort fen_rfthr; /* Received frames threshold */
+ ushort fen_rfcnt; /* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */
+#define FCC_ENET_RXC ((ushort)0x0040) /* Control Frame Received */
+#define FCC_ENET_TXC ((ushort)0x0020) /* Out of seq. Tx sent */
+#define FCC_ENET_TXE ((ushort)0x0010) /* Transmit Error */
+#define FCC_ENET_RXF ((ushort)0x0008) /* Full frame received */
+#define FCC_ENET_BSY ((ushort)0x0004) /* Busy. Rx Frame dropped */
+#define FCC_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */
+#define FCC_ENET_RXB ((ushort)0x0001) /* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC ((uint)0x80000000) /* Enable heartbeat */
+#define FCC_PSMR_FC ((uint)0x40000000) /* Force Collision */
+#define FCC_PSMR_SBT ((uint)0x20000000) /* Stop backoff timer */
+#define FCC_PSMR_LPB ((uint)0x10000000) /* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW ((uint)0x08000000) /* Late collision select */
+#define FCC_PSMR_FDE ((uint)0x04000000) /* Full Duplex Enable */
+#define FCC_PSMR_MON ((uint)0x02000000) /* RMON Enable */
+#define FCC_PSMR_PRO ((uint)0x00400000) /* Promiscuous Enable */
+#define FCC_PSMR_FCE ((uint)0x00200000) /* Flow Control Enable */
+#define FCC_PSMR_RSH ((uint)0x00100000) /* Receive Short Frames */
+#define FCC_PSMR_CAM ((uint)0x00000400) /* CAM enable */
+#define FCC_PSMR_BRO ((uint)0x00000200) /* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC ((uint)0x00000080) /* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+ ushort iic_rbase; /* Rx Buffer descriptor base address */
+ ushort iic_tbase; /* Tx Buffer descriptor base address */
+ u_char iic_rfcr; /* Rx function code */
+ u_char iic_tfcr; /* Tx function code */
+ ushort iic_mrblr; /* Max receive buffer length */
+ uint iic_rstate; /* Internal */
+ uint iic_rdp; /* Internal */
+ ushort iic_rbptr; /* Internal */
+ ushort iic_rbc; /* Internal */
+ uint iic_rxtmp; /* Internal */
+ uint iic_tstate; /* Internal */
+ uint iic_tdp; /* Internal */
+ ushort iic_tbptr; /* Internal */
+ ushort iic_tbc; /* Internal */
+ uint iic_txtmp; /* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+ ushort spi_rbase; /* Rx Buffer descriptor base address */
+ ushort spi_tbase; /* Tx Buffer descriptor base address */
+ u_char spi_rfcr; /* Rx function code */
+ u_char spi_tfcr; /* Tx function code */
+ ushort spi_mrblr; /* Max receive buffer length */
+ uint spi_rstate; /* Internal */
+ uint spi_rdp; /* Internal */
+ ushort spi_rbptr; /* Internal */
+ ushort spi_rbc; /* Internal */
+ uint spi_rxtmp; /* Internal */
+ uint spi_tstate; /* Internal */
+ uint spi_tdp; /* Internal */
+ ushort spi_tbptr; /* Internal */
+ ushort spi_tbc; /* Internal */
+ uint spi_txtmp; /* Internal */
+ uint spi_res; /* Tx temp. */
+ uint spi_res1[4]; /* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */
+#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */
+#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */
+#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */
+#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */
+#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */
+#define SPMODE_EN ((ushort)0x0100) /* Enable */
+#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */
+#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */
+
+#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x) ((x) &0xF)
+
+#define SPI_EB ((u_char)0x10) /* big endian byte order */
+
+#define BD_IIC_START ((ushort)0x0400)
+
+#endif /* __CPM_82XX__ */
diff --git a/post/uart.c b/post/uart.c
new file mode 100644
index 0000000..354c6c7
--- /dev/null
+++ b/post/uart.c
@@ -0,0 +1,583 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * UART test
+ *
+ * The Serial Management Controllers (SMC) and the Serial Communication
+ * Controllers (SCC) listed in ctlr_list array below are tested in
+ * the loopback UART mode.
+ * The controllers are configured accordingly and several characters
+ * are transmitted. The configurable test parameters are:
+ * MIN_PACKET_LENGTH - minimum size of packet to transmit
+ * MAX_PACKET_LENGTH - maximum size of packet to transmit
+ * TEST_NUM - number of tests
+ */
+
+#ifdef CONFIG_POST
+
+#include <post.h>
+#if defined(CONFIG_8xx)
+#include <commproc.h>
+#elif defined(CONFIG_MPC8260)
+#include <asm/cpm_8260.h>
+#else
+#error "Apparently a bad configuration, please fix."
+#endif
+#include <command.h>
+#include <net.h>
+
+#if CONFIG_POST & CFG_POST_UART
+
+#define CTLR_SMC 0
+#define CTLR_SCC 1
+
+/* The list of controllers to test */
+#if defined(CONFIG_MPC823)
+static int ctlr_list[][2] =
+ { {CTLR_SMC, 0}, {CTLR_SMC, 1}, {CTLR_SCC, 1} };
+#else
+static int ctlr_list[][2] = { };
+#endif
+
+#define CTRL_LIST_SIZE (sizeof(ctlr_list) / sizeof(ctlr_list[0]))
+
+static struct {
+ void (*init) (int index);
+ void (*putc) (int index, const char c);
+ int (*getc) (int index);
+} ctlr_proc[2];
+
+static char *ctlr_name[2] = { "SMC", "SCC" };
+
+static int used_by_uart[2] = { -1, -1 };
+static int used_by_ether[2] = { -1, -1 };
+
+static int proff_smc[] = { PROFF_SMC1, PROFF_SMC2 };
+static int proff_scc[] =
+ { PROFF_SCC1, PROFF_SCC2, PROFF_SCC3, PROFF_SCC4 };
+
+ /*
+ * SMC callbacks
+ */
+
+static void smc_init (int smc_index)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 };
+
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile smc_t *sp;
+ volatile smc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ uint dpaddr;
+
+ /* initialize pointers to SMC */
+
+ sp = (smc_t *) & (cp->cp_smc[smc_index]);
+ up = (smc_uart_t *) & cp->cp_dparam[proff_smc[smc_index]];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+
+ /* Enable SDMA.
+ */
+ im->im_siu_conf.sc_sdcr = 1;
+
+ /* clear error conditions */
+#ifdef CFG_SDSR
+ im->im_sdma.sdma_sdsr = CFG_SDSR;
+#else
+ im->im_sdma.sdma_sdsr = 0x83;
+#endif
+
+ /* clear SDMA interrupt mask */
+#ifdef CFG_SDMR
+ im->im_sdma.sdma_sdmr = CFG_SDMR;
+#else
+ im->im_sdma.sdma_sdmr = 0x00;
+#endif
+
+#if defined(CONFIG_FADS)
+ /* Enable RS232 */
+ *((uint *) BCSR1) &=
+ ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2);
+#endif
+
+#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
+ /* Enable Monitor Port Transceiver */
+ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR;
+#endif
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+#ifdef CFG_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+ dpaddr = CPM_POST_BASE;
+#endif
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ * For now, this address seems OK, but it may have to
+ * change with newer versions of the firmware.
+ * damm: allocating space after the two buffers for rx/tx data
+ */
+
+ rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->smc_rbase = dpaddr;
+ up->smc_tbase = dpaddr + sizeof (cbd_t);
+ up->smc_rfcr = SMC_EB;
+ up->smc_tfcr = SMC_EB;
+
+#if defined(CONFIG_MBX)
+ board_serial_init ();
+#endif
+
+ /* Set UART mode, 8 bit, no parity, one stop.
+ * Enable receive and transmit.
+ * Set local loopback mode.
+ */
+ sp->smc_smcmr = smcr_mk_clen (9) | SMCMR_SM_UART | (ushort) 0x0004;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->smc_smcm = 0;
+ sp->smc_smce = 0xff;
+
+ /* Set up the baud rate generator.
+ */
+ cp->cp_simode = 0x00000000;
+
+ cp->cp_brgc1 =
+ (((gd->cpu_clk / 16 / gd->baudrate) -
+ 1) << 1) | CPM_BRG_EN;
+
+ /* Make the first buffer the only buffer.
+ */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Single character receive.
+ */
+ up->smc_mrblr = 1;
+ up->smc_maxidl = 0;
+
+ /* Initialize Tx/Rx parameters.
+ */
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ cp->cp_cpcr =
+ mk_cr_cmd (cpm_cr_ch[smc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
+}
+
+static void smc_putc (int smc_index, const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+ up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+ tbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_tbase];
+
+ /* Wait for last character to go.
+ */
+
+ buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+ __asm__ ("eieio");
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+ __asm__ ("eieio");
+#if 1
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+}
+
+static int smc_getc (int smc_index)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile smc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ unsigned char c;
+ int i;
+
+ up = (smc_uart_t *) & cpmp->cp_dparam[proff_smc[smc_index]];
+
+ rbdf = (cbd_t *) & cpmp->cp_dpmem[up->smc_rbase];
+
+ /* Wait for character to show up.
+ */
+ buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+ while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+ for (i = 100; i > 0; i--) {
+ if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+ break;
+ udelay (1000);
+ }
+
+ if (i == 0)
+ return -1;
+#endif
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+ /*
+ * SCC callbacks
+ */
+
+static void scc_init (int scc_index)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ static int cpm_cr_ch[] = {
+ CPM_CR_CH_SCC1,
+ CPM_CR_CH_SCC2,
+ CPM_CR_CH_SCC3,
+ CPM_CR_CH_SCC4,
+ };
+
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile scc_t *sp;
+ volatile scc_uart_t *up;
+ volatile cbd_t *tbdf, *rbdf;
+ volatile cpm8xx_t *cp = &(im->im_cpm);
+ uint dpaddr;
+
+ /* initialize pointers to SCC */
+
+ sp = (scc_t *) & (cp->cp_scc[scc_index]);
+ up = (scc_uart_t *) & cp->cp_dparam[proff_scc[scc_index]];
+
+ /* Disable transmitter/receiver.
+ */
+ sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+
+ /* Allocate space for two buffer descriptors in the DP ram.
+ */
+
+#ifdef CFG_ALLOC_DPRAM
+ dpaddr = dpram_alloc_align (sizeof (cbd_t) * 2 + 2, 8);
+#else
+ dpaddr = CPM_POST_BASE;
+#endif
+
+ /* Enable SDMA.
+ */
+ im->im_siu_conf.sc_sdcr = 0x0001;
+
+ /* Set the physical address of the host memory buffers in
+ * the buffer descriptors.
+ */
+
+ rbdf = (cbd_t *) & cp->cp_dpmem[dpaddr];
+ rbdf->cbd_bufaddr = (uint) (rbdf + 2);
+ rbdf->cbd_sc = 0;
+ tbdf = rbdf + 1;
+ tbdf->cbd_bufaddr = ((uint) (rbdf + 2)) + 1;
+ tbdf->cbd_sc = 0;
+
+ /* Set up the baud rate generator.
+ */
+ cp->cp_sicr &= ~(0x000000FF << (8 * scc_index));
+ /* no |= needed, since BRG1 is 000 */
+
+ cp->cp_brgc1 =
+ (((gd->cpu_clk / 16 / gd->baudrate) -
+ 1) << 1) | CPM_BRG_EN;
+
+ /* Set up the uart parameters in the parameter ram.
+ */
+ up->scc_genscc.scc_rbase = dpaddr;
+ up->scc_genscc.scc_tbase = dpaddr + sizeof (cbd_t);
+
+ /* Initialize Tx/Rx parameters.
+ */
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+ cp->cp_cpcr =
+ mk_cr_cmd (cpm_cr_ch[scc_index], CPM_CR_INIT_TRX) | CPM_CR_FLG;
+
+ while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
+ ;
+
+ up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
+ up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
+
+ up->scc_genscc.scc_mrblr = 1; /* Single character receive */
+ up->scc_maxidl = 0; /* disable max idle */
+ up->scc_brkcr = 1; /* send one break character on stop TX */
+ up->scc_parec = 0;
+ up->scc_frmec = 0;
+ up->scc_nosec = 0;
+ up->scc_brkec = 0;
+ up->scc_uaddr1 = 0;
+ up->scc_uaddr2 = 0;
+ up->scc_toseq = 0;
+ up->scc_char1 = 0x8000;
+ up->scc_char2 = 0x8000;
+ up->scc_char3 = 0x8000;
+ up->scc_char4 = 0x8000;
+ up->scc_char5 = 0x8000;
+ up->scc_char6 = 0x8000;
+ up->scc_char7 = 0x8000;
+ up->scc_char8 = 0x8000;
+ up->scc_rccm = 0xc0ff;
+
+ /* Set low latency / small fifo.
+ */
+ sp->scc_gsmrh = SCC_GSMRH_RFW;
+
+ /* Set UART mode
+ */
+ sp->scc_gsmrl &= ~0xF;
+ sp->scc_gsmrl |= SCC_GSMRL_MODE_UART;
+
+ /* Set local loopback mode.
+ */
+ sp->scc_gsmrl &= ~SCC_GSMRL_DIAG_LE;
+ sp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
+
+ /* Set clock divider 16 on Tx and Rx
+ */
+ sp->scc_gsmrl |= (SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+
+ sp->scc_psmr |= SCU_PSMR_CL;
+
+ /* Mask all interrupts and remove anything pending.
+ */
+ sp->scc_sccm = 0;
+ sp->scc_scce = 0xffff;
+ sp->scc_dsr = 0x7e7e;
+ sp->scc_psmr = 0x3000;
+
+ /* Make the first buffer the only buffer.
+ */
+ tbdf->cbd_sc |= BD_SC_WRAP;
+ rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
+
+ /* Enable transmitter/receiver.
+ */
+ sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+}
+
+static void scc_putc (int scc_index, const char c)
+{
+ volatile cbd_t *tbdf;
+ volatile char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+
+ up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+ tbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
+
+ /* Wait for last character to go.
+ */
+
+ buf = (char *) tbdf->cbd_bufaddr;
+#if 0
+ __asm__ ("eieio");
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+
+ *buf = c;
+ tbdf->cbd_datlen = 1;
+ tbdf->cbd_sc |= BD_SC_READY;
+ __asm__ ("eieio");
+#if 1
+ while (tbdf->cbd_sc & BD_SC_READY)
+ __asm__ ("eieio");
+#endif
+}
+
+static int scc_getc (int scc_index)
+{
+ volatile cbd_t *rbdf;
+ volatile unsigned char *buf;
+ volatile scc_uart_t *up;
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ volatile cpm8xx_t *cpmp = &(im->im_cpm);
+ unsigned char c;
+ int i;
+
+ up = (scc_uart_t *) & cpmp->cp_dparam[proff_scc[scc_index]];
+
+ rbdf = (cbd_t *) & cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
+
+ /* Wait for character to show up.
+ */
+ buf = (unsigned char *) rbdf->cbd_bufaddr;
+#if 0
+ while (rbdf->cbd_sc & BD_SC_EMPTY);
+#else
+ for (i = 100; i > 0; i--) {
+ if (!(rbdf->cbd_sc & BD_SC_EMPTY))
+ break;
+ udelay (1000);
+ }
+
+ if (i == 0)
+ return -1;
+#endif
+ c = *buf;
+ rbdf->cbd_sc |= BD_SC_EMPTY;
+
+ return (c);
+}
+
+ /*
+ * Test routines
+ */
+
+static int test_ctlr (int ctlr, int index)
+{
+ int res = -1;
+ char test_str[] = "*** UART Test String ***\r\n";
+ int i;
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ if (used_by_uart[ctlr] == index) {
+ while (ctlr_proc[ctlr].getc (index) != -1);
+ }
+#endif
+
+ ctlr_proc[ctlr].init (index);
+
+ for (i = 0; i < sizeof (test_str) - 1; i++) {
+ ctlr_proc[ctlr].putc (index, test_str[i]);
+ if (ctlr_proc[ctlr].getc (index) != test_str[i])
+ goto Done;
+ }
+
+ res = 0;
+
+ Done:
+
+#if !defined(CONFIG_8xx_CONS_NONE)
+ if (used_by_uart[ctlr] == index) {
+ serial_init ();
+ }
+#endif
+
+#if defined(SCC_ENET)
+ if (used_by_ether[ctlr] == index) {
+ DECLARE_GLOBAL_DATA_PTR;
+
+ eth_init (gd->bd);
+ }
+#endif
+
+ if (res != 0) {
+ post_log ("uart %s%d test failed\n",
+ ctlr_name[ctlr], index + 1);
+ }
+
+ return res;
+}
+
+int uart_post_test (int flags)
+{
+ int res = 0;
+ int i;
+
+#if defined(CONFIG_8xx_CONS_SMC1)
+ used_by_uart[CTLR_SMC] = 0;
+#elif defined(CONFIG_8xx_CONS_SMC2)
+ used_by_uart[CTLR_SMC] = 1;
+#elif defined(CONFIG_8xx_CONS_SCC1)
+ used_by_uart[CTLR_SCC] = 0;
+#elif defined(CONFIG_8xx_CONS_SCC2)
+ used_by_uart[CTLR_SCC] = 1;
+#elif defined(CONFIG_8xx_CONS_SCC3)
+ used_by_uart[CTLR_SCC] = 2;
+#elif defined(CONFIG_8xx_CONS_SCC4)
+ used_by_uart[CTLR_SCC] = 3;
+#endif
+
+#if defined(SCC_ENET)
+ used_by_ether[CTLR_SCC] = SCC_ENET;
+#endif
+
+ ctlr_proc[CTLR_SMC].init = smc_init;
+ ctlr_proc[CTLR_SMC].putc = smc_putc;
+ ctlr_proc[CTLR_SMC].getc = smc_getc;
+
+ ctlr_proc[CTLR_SCC].init = scc_init;
+ ctlr_proc[CTLR_SCC].putc = scc_putc;
+ ctlr_proc[CTLR_SCC].getc = scc_getc;
+
+ for (i = 0; i < CTRL_LIST_SIZE; i++) {
+ if (test_ctlr (ctlr_list[i][0], ctlr_list[i][1]) != 0) {
+ res = -1;
+ }
+ }
+
+ return res;
+}
+
+#endif /* CONFIG_POST & CFG_POST_UART */
+
+#endif /* CONFIG_POST */