summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG2
-rw-r--r--board/kup4k/kup4k.c22
-rw-r--r--common/cmd_ide.c6
-rw-r--r--common/cmd_pcmcia.c410
-rw-r--r--include/configs/KUP4K.h2
5 files changed, 217 insertions, 225 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 1fa99b4..7519b8f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
Changes since for U-Boot 0.1.0:
======================================================================
+* Add LED indication for IDE activity on KUP4K board
+
* Fix startup problems with VFD display on TRAB
* Patch by Pierre Aubert, 20 Nov 2002
diff --git a/board/kup4k/kup4k.c b/board/kup4k/kup4k.c
index 86e1c81..aeafa6a 100644
--- a/board/kup4k/kup4k.c
+++ b/board/kup4k/kup4k.c
@@ -288,12 +288,22 @@ int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_STATUS_LED
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+#endif
#ifdef CONFIG_KUP4K_LOGO
bd_t *bd = gd->bd;
lcd_logo(bd);
#endif /* CONFIG_KUP4K_LOGO */
+#ifdef CONFIG_IDE_LED
+ /* Configure PA8 as output port */
+ immap->im_ioport.iop_padir |= 0x80;
+ immap->im_ioport.iop_paodr |= 0x80;
+ immap->im_ioport.iop_papar &= ~0x80;
+ immap->im_ioport.iop_padat |= 0x80; /* turn it off */
+#endif
return(0);
}
@@ -422,3 +432,15 @@ void lcd_logo(bd_t *bd){
}
#endif /* CONFIG_KUP4K_LOGO */
+#ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ /* We have one led for both pcmcia slots */
+ if (status) { /* led on */
+ immap->im_ioport.iop_padat &= ~0x80;
+ } else {
+ immap->im_ioport.iop_padat |= 0x80;
+ }
+}
+#endif
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 7b45508..d082d5e 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -132,8 +132,12 @@ static block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
+#ifndef CONFIG_KUP4K
static void ide_led (uchar led, uchar status);
#else
+extern void ide_led (uchar led, uchar status);
+#endif
+#else
#ifndef CONFIG_AMIGAONEG3SE
#define ide_led(a,b) /* dummy */
#else
@@ -1347,7 +1351,7 @@ static void ide_reset (void)
/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE)
+#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K)
static uchar led_buffer = 0; /* Buffer for current LED status */
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 4c799a5..8a3491e 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -88,7 +88,7 @@ static u_int m8xx_get_graycode(u_int size);
static u_int m8xx_get_speed(u_int ns, u_int is_io);
#endif
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
/* look up table for pgcrx registers */
@@ -101,7 +101,7 @@ static u_int *pcmcia_pgcrx[2] = {
const char *indent = "\t ";
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
@@ -126,7 +126,7 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
#endif /* CFG_CMD_PCMCIA */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_LWMON)
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
@@ -185,7 +185,7 @@ int pcmcia_on (void)
break;
}
case 6:
- case 2: { /* map I/O window for command/ctrl reg block */
+ case 2: { /* map I/O window for cmd/ctrl reg block */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
@@ -206,15 +206,15 @@ int pcmcia_on (void)
++win;
}
- for (i = 0, rc = 0, slot = _slot_; i < PCMCIA_SOCKETS_NO; i++, slot = !slot) {
+ for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
/* turn off voltage */
if ((rc = voltage_set(slot, 0, 0)))
continue;
-
+
/* Enable external hardware */
if ((rc = hardware_enable(slot)))
continue;
-
+
#ifdef CONFIG_IDE_8xx_PCCARD
if ((rc = check_ide_device(i)))
continue;
@@ -223,7 +223,7 @@ int pcmcia_on (void)
return (rc);
}
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
@@ -261,7 +261,7 @@ static int pcmcia_off (void)
#endif /* CFG_CMD_PCMCIA */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
@@ -280,8 +280,8 @@ static int check_ide_device (int slot)
int found = 0;
int i;
- addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
- CFG_PCMCIA_MEM_SIZE * (slot * 4));
+ addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
+ CFG_PCMCIA_MEM_SIZE * (slot * 4));
debug ("PCMCIA MEM: %08X\n", addr);
start = p = (volatile uchar *) addr;
@@ -354,17 +354,17 @@ static int check_ide_device (int slot)
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
-/* ---------------------------------------------------------------------------- */
-/* board specific stuff: */
-/* voltage_set(), hardware_enable() and hardware_disable() */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* board specific stuff: */
+/* voltage_set(), hardware_enable() and hardware_disable() */
+/* -------------------------------------------------------------------- */
-/* ---------------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* RPX Boards from Embedded Planet */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
@@ -431,9 +431,9 @@ static int hardware_disable(int slot)
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_RPXCLASSIC */
-/* ---------------------------------------------------------------------------- */
-/* (F)ADS Boards from Motorola */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* (F)ADS Boards from Motorola */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_ADS) || defined(CONFIG_FADS)
@@ -509,9 +509,9 @@ static int hardware_disable(int slot)
#endif /* (F)ADS */
-/* ---------------------------------------------------------------------------- */
-/* TQM8xxL Boards by TQ Components */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* TQM8xxL Boards by TQ Components */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_TQM8xxL)
@@ -545,17 +545,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -597,7 +594,7 @@ static int hardware_enable(int slot)
immap->im_ioport.iop_pcdat |= 0x0002;
puts (" 3.3V card found: ");
}
- immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+ immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#if 0
/* VCC switch error flag, PCMCIA slot INPACK_ pin */
cp->cp_pbdir &= ~(0x0020 | 0x0010);
@@ -635,11 +632,8 @@ static int hardware_disable(int slot)
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
- /* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(_slot_) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
@@ -670,9 +664,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(_slot_);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -701,7 +695,7 @@ static int voltage_set(int slot, int vcc, int vpp)
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
immap->im_ioport.iop_pcdat |= reg;
- immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+ immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
if (reg) {
debug ("PCMCIA powered at %sV\n",
(reg&0x0004) ? "5.0" : "3.3");
@@ -725,9 +719,9 @@ done:
#endif /* TQM8xxL */
-/* ---------------------------------------------------------------------------- */
-/* LWMON Board */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* LWMON Board */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_LWMON)
@@ -759,7 +753,7 @@ static int hardware_enable(int slot)
reg = pic_read (0x60);
debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
reg &= ~0x10;
- /* reg |= 0x08; Vpp not needed */
+ /* reg |= 0x08; Vpp not needed */
pic_write (0x60, reg);
#ifdef DEBUG
reg = pic_read (0x60);
@@ -782,17 +776,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -826,7 +817,7 @@ static int hardware_enable(int slot)
}
/* switch VCC on */
- val |= MAX1604_OP_SUS | MAX1604_VCCBON;
+ val |= MAX1604_OP_SUS | MAX1604_VCCBON;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
@@ -866,10 +857,8 @@ static int hardware_disable(int slot)
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
/* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(_slot_) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
@@ -911,9 +900,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(_slot_);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -962,81 +951,79 @@ done:
#endif /* LWMON */
-/* ---------------------------------------------------------------------------- */
-/* GTH board by Corelatus AB */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* GTH board by Corelatus AB */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_GTH)
#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
-static int voltage_set(int slot, int vcc, int vpp)
-{ /* Do nothing */
- return 0;
+static int voltage_set (int slot, int vcc, int vpp)
+{ /* Do nothing */
+ return 0;
}
static int hardware_enable (int slot)
{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, mask;
-
- debug ("hardware_enable: GTH Slot %c\n", 'A'+slot);
-
- immap = (immap_t *)CFG_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
- cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & 0x98000000) {
- printf (" No Card found\n");
- return (1);
- }
-
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- reg = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- reg,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
+ volatile immap_t *immap;
+ volatile cpm8xx_t *cp;
+ volatile pcmconf8xx_t *pcmp;
+ volatile sysconf8xx_t *sysp;
+ uint reg, mask;
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
+ debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
- udelay(250000); /* some cards need >150 ms to come up :-( */
+ immap = (immap_t *) CFG_IMMR;
+ sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
+ pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+ cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
- debug ("# hardware_enable done\n");
+ /* clear interrupt state, and disable interrupts */
+ pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
+ pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
- return 0;
+ /*
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
+ */
+ debug ("Disable PCMCIA buffers and assert RESET\n");
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ PCMCIA_PGCRX (_slot_) = reg;
+ udelay (500);
+
+ /*
+ * Make sure there is a card in the slot,
+ * then configure the interface.
+ */
+ udelay (10000);
+ debug ("[%d] %s: PIPR(%p)=0x%x\n",
+ __LINE__, __FUNCTION__,
+ &(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
+ if (pcmp->pcmc_pipr & 0x98000000) {
+ printf (" No Card found\n");
+ return (1);
+ }
+
+ mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
+ reg = pcmp->pcmc_pipr;
+ debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+ reg,
+ (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
+ (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
+
+ debug ("Enable PCMCIA buffers and stop RESET\n");
+ reg = PCMCIA_PGCRX (_slot_);
+ reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
+ PCMCIA_PGCRX (_slot_) = reg;
+
+ udelay (250000); /* some cards need >150 ms to come up :-( */
+
+ debug ("# hardware_enable done\n");
+
+ return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
@@ -1046,9 +1033,9 @@ static int hardware_disable(int slot)
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_GTH */
-/* ---------------------------------------------------------------------------- */
-/* ICU862 Boards by Cambridge Broadband Ltd. */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ICU862 Boards by Cambridge Broadband Ltd. */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_ICU862)
@@ -1087,17 +1074,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1125,13 +1109,13 @@ static int hardware_enable(int slot)
reg = cp->cp_pbdat;
if ((pipr & mask) == mask) {
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC3); /* 3V off */
+ reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
+ TPS2205_VCC3); /* 3V off */
reg &= ~(TPS2205_VCC5); /* 5V on */
puts (" 5.0V card found: ");
} else {
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC5); /* 5V off */
+ reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
+ TPS2205_VCC5); /* 5V off */
reg &= ~(TPS2205_VCC3); /* 3V on */
puts (" 3.3V card found: ");
}
@@ -1188,10 +1172,8 @@ static int hardware_disable(int slot)
cp->cp_pbdat &= ~(TPS2205_SHDN);
/* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(_slot_) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
@@ -1224,9 +1206,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(_slot_);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1298,9 +1280,9 @@ static void cfg_port_B (void)
* Switch off all voltages, assert shutdown
*/
reg = cp->cp_pbdat;
- reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
- TPS2205_VCC3 | TPS2205_VCC5 | /* VAVCC => Hi-Z */
- TPS2205_SHDN); /* enable switch */
+ reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
+ TPS2205_VCC3 | TPS2205_VCC5 | /* VAVCC => Hi-Z */
+ TPS2205_SHDN); /* enable switch */
cp->cp_pbdat = reg;
cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
@@ -1315,9 +1297,9 @@ static void cfg_port_B (void)
#endif /* ICU862 */
-/* ---------------------------------------------------------------------------- */
-/* C2MON Boards by TTTech Computertechnik AG */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* C2MON Boards by TTTech Computertechnik AG */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_C2MON)
@@ -1357,17 +1339,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1453,10 +1432,8 @@ static int hardware_disable(int slot)
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(_slot_) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
@@ -1494,9 +1471,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(_slot_);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1599,9 +1576,9 @@ static void cfg_ports (void)
#endif /* C2MON */
-/* ----------------------------------------------------------------------------
- MBX board from Morotola
- ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* MBX board from Morotola */
+/* -------------------------------------------------------------------- */
#if defined( CONFIG_MBX )
#include <../board/mbx8xx/csr.h>
@@ -1687,15 +1664,12 @@ static int hardware_enable (int slot)
pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX (_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX (_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX (_slot_) = reg;
@@ -1752,9 +1726,9 @@ static int hardware_disable (int slot)
}
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_MBX */
-/* ---------------------------------------------------------------------------- */
-/* R360MPI Board */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* R360MPI Board */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_R360MPI)
@@ -1788,17 +1762,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(_slot_) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1889,10 +1860,8 @@ static int hardware_disable(int slot)
immap->im_ioport.iop_padat |= 0x0200;
/* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(_slot_) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
@@ -1923,9 +1892,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(_slot_);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
@@ -1963,8 +1932,8 @@ static int voltage_set(int slot, int vcc, int vpp)
immap->im_ioport.iop_pcdat &= !reg;
if (reg & 0x0400)
immap->im_ioport.iop_padat &= !reg;
- immap->im_ioport.iop_pcdir |= 0x0200;
- immap->im_ioport.iop_padir |= 0x0400;
+ immap->im_ioport.iop_pcdir |= 0x0200;
+ immap->im_ioport.iop_padir |= 0x0400;
if (reg) {
debug ("PCMCIA powered at %sV\n",
(reg&0x0400) ? "5.0" : "3.3");
@@ -1987,9 +1956,9 @@ done:
#endif /* R360MPI */
-/* ---------------------------------------------------------------------------- */
-/* KUP4K Board */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* KUP4K Board */
+/* -------------------------------------------------------------------- */
#if defined(CONFIG_KUP4K)
#define PCMCIA_BOARD_MSG "KUP4K"
@@ -2023,17 +1992,14 @@ static int hardware_enable(int slot)
pcmp->pcmc_pscr = PCMCIA_MASK(slot);
pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
- /* disable interrupts & DMA */
- PCMCIA_PGCRX(slot) = 0;
-
/*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
+ * Disable interrupts, DMA, and PCMCIA buffers
+ * (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(slot);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = 0;
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(2500);
@@ -2110,16 +2076,14 @@ static int hardware_disable(int slot)
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
+
/* remove all power */
if (slot)
cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3;
/* Configure PCMCIA General Control Register */
- PCMCIA_PGCRX(slot) = 0;
-
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(slot);
+ reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
@@ -2156,9 +2120,9 @@ static int voltage_set(int slot, int vcc, int vpp)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(slot);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
+ reg = PCMCIA_PGCRX(slot);
+ reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
+ reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(500);
@@ -2213,14 +2177,14 @@ static int voltage_set(int slot, int vcc, int vpp)
-/* ---------------------------------------------------------------------------- */
-/* End of Board Specific Stuff */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* End of Board Specific Stuff */
+/* -------------------------------------------------------------------- */
-/* ---------------------------------------------------------------------------- */
-/* MPC8xx Specific Stuff - should go to MPC8xx directory */
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* MPC8xx Specific Stuff - should go to MPC8xx directory */
+/* -------------------------------------------------------------------- */
/*
* Search this table to see if the windowsize is
@@ -2241,7 +2205,7 @@ static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
0x00800000, 0x00400000, 0x00100000, 0x00200000 };
-/* ---------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
static u_int m8xx_get_graycode(u_int size)
{
@@ -2258,7 +2222,7 @@ static u_int m8xx_get_graycode(u_int size)
return k;
}
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#if 0
static u_int m8xx_get_speed(u_int ns, u_int is_io)
@@ -2311,7 +2275,7 @@ static u_int m8xx_get_speed(u_int ns, u_int is_io)
}
#endif
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
static void print_funcid (int func)
@@ -2353,7 +2317,7 @@ static void print_funcid (int func)
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
static void print_fixed (volatile uchar *p)
@@ -2411,7 +2375,7 @@ static void print_fixed (volatile uchar *p)
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
@@ -2475,6 +2439,6 @@ static int identify (volatile uchar *p)
}
#endif /* CONFIG_IDE_8xx_PCCARD */
-/* ------------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
#endif /* CFG_CMD_PCMCIA || (CFG_CMD_IDE && CONFIG_IDE_8xx_PCCARD) */
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index 7dc1b90..d02ec0d 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -292,7 +292,7 @@
#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
+#define CONFIG_IDE_LED 1 /* LED for ide supported */
#undef CONFIG_IDE_RESET /* reset for ide not supported */
#define CFG_IDE_MAXBUS 2