summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG-before-U-Boot-1.1.514
-rw-r--r--CREDITS4
-rw-r--r--MAINTAINERS6
-rwxr-xr-xMAKEALL586
-rw-r--r--Makefile34
-rw-r--r--README204
-rw-r--r--board/davinci/dv-evm/Makefile52
-rw-r--r--board/davinci/dv-evm/board_init.S29
-rw-r--r--board/davinci/dv-evm/config.mk39
-rw-r--r--board/davinci/dv-evm/dv_board.c211
-rw-r--r--board/davinci/dv-evm/u-boot.lds52
-rw-r--r--board/davinci/schmoogie/Makefile52
-rw-r--r--board/davinci/schmoogie/board_init.S29
-rw-r--r--board/davinci/schmoogie/config.mk39
-rw-r--r--board/davinci/schmoogie/dv_board.c253
-rw-r--r--board/davinci/schmoogie/u-boot.lds52
-rw-r--r--board/davinci/sonata/Makefile52
-rw-r--r--board/davinci/sonata/board_init.S100
-rw-r--r--board/davinci/sonata/config.mk39
-rw-r--r--board/davinci/sonata/dv_board.c208
-rw-r--r--board/davinci/sonata/u-boot.lds52
-rw-r--r--board/delta/delta.c15
-rw-r--r--board/freescale/mpc8323erdb/Makefile50
-rw-r--r--board/freescale/mpc8323erdb/config.mk28
-rw-r--r--board/freescale/mpc8323erdb/mpc8323erdb.c217
-rw-r--r--board/mpc8349emds/mpc8349emds.c327
-rw-r--r--board/mpc8349itx/config.mk6
-rw-r--r--board/mpc8360emds/mpc8360emds.c389
-rw-r--r--board/mpc8360emds/pci.c22
-rw-r--r--board/trab/auto_update.c2
-rw-r--r--common/cmd_nvedit.c15
-rw-r--r--common/usb_kbd.c6
-rw-r--r--cpu/arm920t/at91rm9200/Makefile2
-rw-r--r--cpu/arm920t/at91rm9200/usb.c53
-rw-r--r--cpu/arm920t/s3c24x0/Makefile2
-rw-r--r--cpu/arm920t/s3c24x0/usb.c72
-rw-r--r--cpu/arm926ejs/davinci/Makefile49
-rw-r--r--cpu/arm926ejs/davinci/dp83848.c156
-rw-r--r--cpu/arm926ejs/davinci/ether.c650
-rw-r--r--cpu/arm926ejs/davinci/i2c.c351
-rw-r--r--cpu/arm926ejs/davinci/lowlevel_init.S707
-rw-r--r--cpu/arm926ejs/davinci/lxt972.c142
-rw-r--r--cpu/arm926ejs/davinci/nand.c389
-rw-r--r--cpu/arm926ejs/davinci/reset.S77
-rw-r--r--cpu/arm926ejs/davinci/timer.c165
-rw-r--r--cpu/mpc5xxx/Makefile2
-rw-r--r--cpu/mpc5xxx/usb.c54
-rw-r--r--cpu/mpc83xx/Makefile2
-rw-r--r--cpu/mpc83xx/cpu.c118
-rw-r--r--cpu/mpc83xx/cpu_init.c50
-rw-r--r--cpu/mpc83xx/ecc.c390
-rw-r--r--cpu/mpc83xx/pci.c36
-rw-r--r--cpu/mpc83xx/spd_sdram.c13
-rw-r--r--cpu/ppc4xx/Makefile4
-rw-r--r--cpu/ppc4xx/usb.c50
-rw-r--r--cpu/pxa/Makefile2
-rw-r--r--cpu/pxa/usb.c79
-rw-r--r--doc/README.generic_usb_ohci60
-rw-r--r--doc/README.mpc8323erdb71
-rw-r--r--doc/README.mpc8360emds23
-rw-r--r--doc/README.mpc83xx.ddrecc (renamed from doc/README.mpc8349emds.ddrecc)60
-rw-r--r--drivers/Makefile6
-rw-r--r--drivers/bios_emulator/Makefile2
-rw-r--r--drivers/fsl_i2c.c3
-rw-r--r--drivers/isp116x-hcd.c1413
-rw-r--r--drivers/isp116x.h489
-rw-r--r--drivers/nand/nand_util.c21
-rw-r--r--drivers/qe/qe.c2
-rw-r--r--drivers/qe/qe.h2
-rw-r--r--drivers/tsec.c6
-rw-r--r--drivers/tsec.h4
-rw-r--r--drivers/usb_ohci.c (renamed from cpu/arm920t/at91rm9200/usb_ohci.c)536
-rw-r--r--drivers/usb_ohci.h (renamed from cpu/arm920t/at91rm9200/usb_ohci.h)34
-rw-r--r--drivers/usbdcore_ep0.c163
-rw-r--r--drivers/usbdcore_mpc8xx.c1400
-rw-r--r--drivers/usbdcore_omap1510.c27
-rw-r--r--drivers/usbtty.c699
-rw-r--r--drivers/usbtty.h60
-rw-r--r--include/_exports.h3
-rw-r--r--include/asm-arm/arch-davinci/emac_defs.h311
-rw-r--r--include/asm-arm/arch-davinci/emif_defs.h61
-rw-r--r--include/asm-arm/arch-davinci/hardware.h166
-rw-r--r--include/asm-arm/arch-davinci/i2c_defs.h94
-rw-r--r--include/asm-arm/arch-davinci/nand_defs.h161
-rw-r--r--include/asm-arm/arch-pxa/pxa-regs.h21
-rw-r--r--include/common.h5
-rw-r--r--include/configs/AdderUSB.h51
-rw-r--r--include/configs/IceCube.h11
-rw-r--r--include/configs/MPC8323ERDB.h583
-rw-r--r--include/configs/MPC8349ITX.h7
-rw-r--r--include/configs/MPC8641HPCN.h11
-rw-r--r--include/configs/TQM5200.h12
-rw-r--r--include/configs/TQM834x.h3
-rw-r--r--include/configs/davinci_dvevm.h214
-rw-r--r--include/configs/davinci_schmoogie.h157
-rw-r--r--include/configs/davinci_sonata.h209
-rw-r--r--include/configs/delta.h12
-rw-r--r--include/configs/mp2usb.h11
-rw-r--r--include/configs/trab.h9
-rw-r--r--include/configs/yosemite.h9
-rw-r--r--include/da9030.h12
-rw-r--r--include/div64.h (renamed from include/asm-avr32/div64.h)0
-rw-r--r--include/dp83848.h88
-rw-r--r--include/exports.h3
-rw-r--r--include/mpc83xx.h4
-rw-r--r--include/usb.h21
-rw-r--r--include/usb_cdc_acm.h43
-rw-r--r--include/usbdcore.h3
-rw-r--r--include/usbdcore_mpc8xx.h210
-rw-r--r--include/usbdcore_omap1510.h18
-rw-r--r--include/usbdescriptors.h38
-rw-r--r--lib_arm/board.c7
-rw-r--r--lib_avr32/Makefile2
-rw-r--r--lib_generic/Makefile2
-rw-r--r--lib_generic/div64.c (renamed from lib_avr32/div64.c)2
-rw-r--r--lib_ppc/board.c6
-rw-r--r--net/eth.c5
117 files changed, 12826 insertions, 1639 deletions
diff --git a/CHANGELOG-before-U-Boot-1.1.5 b/CHANGELOG-before-U-Boot-1.1.5
index 727a7b6..2404148 100644
--- a/CHANGELOG-before-U-Boot-1.1.5
+++ b/CHANGELOG-before-U-Boot-1.1.5
@@ -438,6 +438,20 @@ Changes for U-Boot 1.1.5:
* Call serial_initialize() before first debug() is used.
+* Code cleanup
+
+* Various USB related patches
+ - Add support for mpc8xx USB device.
+ - Add support for Common Device Class - Abstract Control Model USB console.
+ - Add support for flow control in USB slave devices.
+ - Add support for switching between gserial and cdc_acm using environment.
+ - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+ - Update usbcore slightly to ease host enumeration.
+ - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+ - Add AdderUSB_config as a defconfig to enable usage of the USB console
+ by default with the Adder87x U-Boot port.
+ Patch by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
* Cleanup trab board for GCC-4.x
* VoiceBlue update: use new MTD flash partitioning methods, use more
diff --git a/CREDITS b/CREDITS
index 7af1b80..4c8b896 100644
--- a/CREDITS
+++ b/CREDITS
@@ -252,6 +252,10 @@ E: Raghu.Krishnaprasad@fci.com
D: Support for Adder-II MPC852T evaluation board
W: http://www.forcecomputers.com
+N: Sergey Kubushyn
+E: ksi@koi8.net
+D: Support for various TI DaVinci based boards.
+
N: Bernhard Kuhn
E: bkuhn@metrowerks.com
D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards
diff --git a/MAINTAINERS b/MAINTAINERS
index 693b115..865f6fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -444,6 +444,12 @@ Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
+Sergey Kubushyn <ksi@koi8.net>
+
+ DV-EVM ARM926EJS
+ SONATA ARM926EJS
+ SCHMOOGIE ARM926EJS
+
Prakash Kumar <prakash@embedx.com>
cerf250 xscale
diff --git a/MAKEALL b/MAKEALL
index 3e186cc..129c14c 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -26,124 +26,281 @@ LIST=""
## MPC5xx Systems
#########################################################################
-LIST_5xx=" \
- cmi_mpc5xx \
+LIST_5xx=" \
+ cmi_mpc5xx \
"
#########################################################################
## MPC5xxx Systems
#########################################################################
-LIST_5xxx=" \
- BC3450 cm5200 cpci5200 EVAL5200 \
- fo300 icecube_5100 icecube_5200 lite5200b \
- mcc200 mecp5200 motionpro o2dnt \
- pf5200 PM520 TB5200 Total5100 \
- Total5200 Total5200_Rev2 TQM5200 TQM5200_B \
- TQM5200S v38b \
+LIST_5xxx=" \
+ BC3450 \
+ cm5200 \
+ cpci5200 \
+ EVAL5200 \
+ fo300 \
+ icecube_5100 \
+ icecube_5200 \
+ lite5200b \
+ mcc200 \
+ mecp5200 \
+ motionpro \
+ o2dnt \
+ pf5200 \
+ PM520 \
+ TB5200 \
+ Total5100 \
+ Total5200 \
+ Total5200_Rev2 \
+ TQM5200 \
+ TQM5200_B \
+ TQM5200S \
+ v38b \
"
#########################################################################
## MPC512x Systems
#########################################################################
-LIST_512x=" \
- ads5121 \
+LIST_512x=" \
+ ads5121 \
"
#########################################################################
## MPC8xx Systems
#########################################################################
-LIST_8xx=" \
- Adder87x GENIETV MBX860T R360MPI \
- AdderII GTH MHPC RBC823 \
- ADS860 hermes MPC86xADS rmu \
- AMX860 IAD210 MPC885ADS RPXClassic \
- c2mon ICU862_100MHz MVS1 RPXlite \
- CCM IP860 NETPHONE RPXlite_DW \
- cogent_mpc8xx IVML24 NETTA RRvision \
- ELPT860 IVML24_128 NETTA2 SM850 \
- EP88x IVML24_256 NETTA_ISDN spc1920 \
- ESTEEM192E IVMS8 NETVIA SPD823TS \
- ETX094 IVMS8_128 NETVIA_V2 svm_sc8xx \
- FADS823 IVMS8_256 NX823 SXNI855T \
- FADS850SAR KUP4K pcu_e TOP860 \
- FADS860T KUP4X QS823 TQM823L \
- FLAGADM LANTEC QS850 TQM823L_LCD \
- FPS850L lwmon QS860T TQM850L \
- GEN860T MBX quantum TQM855L \
- GEN860T_SC TQM860L \
- TQM885D \
- uc100 \
- v37 \
+LIST_8xx=" \
+ Adder87x \
+ AdderII \
+ ADS860 \
+ AMX860 \
+ c2mon \
+ CCM \
+ cogent_mpc8xx \
+ ELPT860 \
+ EP88x \
+ ESTEEM192E \
+ ETX094 \
+ FADS823 \
+ FADS850SAR \
+ FADS860T \
+ FLAGADM \
+ FPS850L \
+ GEN860T \
+ GEN860T_SC \
+ GENIETV \
+ GTH \
+ hermes \
+ IAD210 \
+ ICU862_100MHz \
+ IP860 \
+ IVML24 \
+ IVML24_128 \
+ IVML24_256 \
+ IVMS8 \
+ IVMS8_128 \
+ IVMS8_256 \
+ KUP4K \
+ KUP4X \
+ LANTEC \
+ lwmon \
+ MBX \
+ MBX860T \
+ MHPC \
+ MPC86xADS \
+ MPC885ADS \
+ MVS1 \
+ NETPHONE \
+ NETTA \
+ NETTA2 \
+ NETTA_ISDN \
+ NETVIA \
+ NETVIA_V2 \
+ NX823 \
+ pcu_e \
+ QS823 \
+ QS850 \
+ QS860T \
+ quantum \
+ R360MPI \
+ RBC823 \
+ rmu \
+ RPXClassic \
+ RPXlite \
+ RPXlite_DW \
+ RRvision \
+ SM850 \
+ spc1920 \
+ SPD823TS \
+ svm_sc8xx \
+ SXNI855T \
+ TOP860 \
+ TQM823L \
+ TQM823L_LCD \
+ TQM850L \
+ TQM855L \
+ TQM860L \
+ TQM885D \
+ uc100 \
+ v37 \
"
#########################################################################
## PPC4xx Systems
#########################################################################
-LIST_4xx=" \
- acadia acadia_nand ADCIOP alpr \
- AP1000 AR405 ASH405 bamboo \
- bamboo_nand bubinga CANBT CMS700 \
- CPCI2DP CPCI405 CPCI4052 CPCI405AB \
- CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
- csb272 csb472 DASA_SIM DP405 \
- DU405 ebony ERIC EXBITGEN \
- G2000 HH405 HUB405 JSE \
- KAREF katmai luan lwmon5 \
- METROBOX MIP405 MIP405T ML2 \
- ml300 ocotea OCRTC ORSG \
- p3p440 PCI405 pcs440ep PIP405 \
- PLU405 PMC405 PPChameleonEVB sbc405 \
- sc3 sequoia sequoia_nand taishan \
- VOH405 VOM405 W7OLMC W7OLMG \
- walnut WUH405 XPEDITE1K yellowstone \
- yosemite yucca \
+LIST_4xx=" \
+ acadia \
+ acadia_nand \
+ ADCIOP \
+ alpr \
+ AP1000 \
+ AR405 \
+ ASH405 \
+ bamboo \
+ bamboo_nand \
+ bubinga \
+ CANBT \
+ CMS700 \
+ CPCI2DP \
+ CPCI405 \
+ CPCI4052 \
+ CPCI405AB \
+ CPCI405DT \
+ CPCI440 \
+ CPCIISER4 \
+ CRAYL1 \
+ csb272 \
+ csb472 \
+ DASA_SIM \
+ DP405 \
+ DU405 \
+ ebony \
+ ERIC \
+ EXBITGEN \
+ G2000 \
+ HH405 \
+ HUB405 \
+ JSE \
+ KAREF \
+ katmai \
+ luan \
+ lwmon5 \
+ METROBOX \
+ MIP405 \
+ MIP405T \
+ ML2 \
+ ml300 \
+ ocotea \
+ OCRTC \
+ ORSG \
+ p3p440 \
+ PCI405 \
+ pcs440ep \
+ PIP405 \
+ PLU405 \
+ PMC405 \
+ PPChameleonEVB \
+ sbc405 \
+ sc3 \
+ sequoia \
+ sequoia_nand \
+ taishan \
+ VOH405 \
+ VOM405 \
+ W7OLMC \
+ W7OLMG \
+ walnut \
+ WUH405 \
+ XPEDITE1K \
+ yellowstone \
+ yosemite \
+ yucca \
"
#########################################################################
## MPC8220 Systems
#########################################################################
-LIST_8220=" \
- Alaska8220 Yukon8220 \
+LIST_8220=" \
+ Alaska8220 \
+ Yukon8220 \
"
#########################################################################
## MPC824x Systems
#########################################################################
-LIST_824x=" \
- A3000 barco BMW CPC45 \
- CU824 debris eXalion HIDDEN_DRAGON \
- MOUSSE MUSENKI MVBLUE \
- OXC PN62 Sandpoint8240 Sandpoint8245 \
- sbc8240 SL8245 utx8245 \
+LIST_824x=" \
+ A3000 \
+ barco \
+ BMW \
+ CPC45 \
+ CU824 \
+ debris \
+ eXalion \
+ HIDDEN_DRAGON \
+ MOUSSE \
+ MUSENKI \
+ MVBLUE \
+ OXC \
+ PN62 \
+ Sandpoint8240 \
+ Sandpoint8245 \
+ sbc8240 \
+ SL8245 \
+ utx8245 \
"
#########################################################################
## MPC8260 Systems (includes 8250, 8255 etc.)
#########################################################################
-LIST_8260=" \
- atc cogent_mpc8260 CPU86 CPU87 \
- ep8248 ep8260 ep82xxm gw8260 \
- hymod IPHASE4539 ISPAN MPC8260ADS \
- MPC8266ADS MPC8272ADS PM826 PM828 \
- ppmc8260 Rattler8248 RPXsuper rsdproto \
- sacsng sbc8260 SCM TQM8260_AC \
- TQM8260_AD TQM8260_AE ZPC1900 \
+LIST_8260=" \
+ atc \
+ cogent_mpc8260 \
+ CPU86 \
+ CPU87 \
+ ep8248 \
+ ep8260 \
+ ep82xxm \
+ gw8260 \
+ hymod \
+ IPHASE4539 \
+ ISPAN \
+ MPC8260ADS \
+ MPC8266ADS \
+ MPC8272ADS \
+ PM826 \
+ PM828 \
+ ppmc8260 \
+ Rattler8248 \
+ RPXsuper \
+ rsdproto \
+ sacsng \
+ sbc8260 \
+ SCM \
+ TQM8260_AC \
+ TQM8260_AD \
+ TQM8260_AE \
+ ZPC1900 \
"
#########################################################################
## MPC83xx Systems (includes 8349, etc.)
#########################################################################
-LIST_83xx=" \
- MPC8313ERDB_33 MPC8313ERDB_66 MPC832XEMDS MPC8349EMDS \
- MPC8349ITX MPC8349ITXGP MPC8360EMDS sbc8349 \
- TQM834x \
+LIST_83xx=" \
+ MPC8313ERDB_33 \
+ MPC8313ERDB_66 \
+ MPC832XEMDS \
+ MPC8349EMDS \
+ MPC8349ITX \
+ MPC8349ITXGP \
+ MPC8360EMDS \
+ sbc8349 \
+ TQM834x \
"
@@ -151,123 +308,226 @@ LIST_83xx=" \
## MPC85xx Systems (includes 8540, 8560 etc.)
#########################################################################
-LIST_85xx=" \
- MPC8540ADS MPC8540EVAL MPC8541CDS MPC8544DS \
- MPC8548CDS MPC8555CDS MPC8560ADS MPC8568MDS \
- PM854 PM856 sbc8540 sbc8560 \
- stxgp3 stxssa TQM8540 TQM8541 \
- TQM8555 TQM8560 \
+LIST_85xx=" \
+ MPC8540ADS \
+ MPC8540EVAL \
+ MPC8541CDS \
+ MPC8544DS \
+ MPC8548CDS \
+ MPC8555CDS \
+ MPC8560ADS \
+ MPC8568MDS \
+ PM854 \
+ PM856 \
+ sbc8540 \
+ sbc8560 \
+ stxgp3 \
+ stxssa \
+ TQM8540 \
+ TQM8541 \
+ TQM8555 \
+ TQM8560 \
"
#########################################################################
## MPC86xx Systems
#########################################################################
-LIST_86xx=" \
- MPC8641HPCN \
+LIST_86xx=" \
+ MPC8641HPCN \
"
#########################################################################
## 74xx/7xx Systems
#########################################################################
-LIST_74xx=" \
- DB64360 DB64460 EVB64260 P3G4 \
- p3m7448 PCIPPC2 PCIPPC6 ZUMA \
- mpc7448hpc2
+LIST_74xx=" \
+ DB64360 \
+ DB64460 \
+ EVB64260 \
+ mpc7448hpc2 \
+ P3G4 \
+ p3m7448 \
+ PCIPPC2 \
+ PCIPPC6 \
+ ZUMA \
"
-LIST_7xx=" \
- BAB7xx CPCI750 ELPPC p3m750 \
- ppmc7xx \
+LIST_7xx=" \
+ BAB7xx \
+ CPCI750 \
+ ELPPC \
+ p3m750 \
+ ppmc7xx \
"
-LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
- ${LIST_8xx} \
- ${LIST_8220} ${LIST_824x} ${LIST_8260} \
- ${LIST_83xx} \
- ${LIST_85xx} \
- ${LIST_86xx} \
- ${LIST_4xx} \
- ${LIST_74xx} ${LIST_7xx}"
+LIST_ppc=" \
+ ${LIST_5xx} \
+ ${LIST_5xxx} \
+ ${LIST_8xx} \
+ ${LIST_8220} \
+ ${LIST_824x} \
+ ${LIST_8260} \
+ ${LIST_83xx} \
+ ${LIST_85xx} \
+ ${LIST_86xx} \
+ ${LIST_4xx} \
+ ${LIST_74xx} \
+ ${LIST_7xx} \
+"
#########################################################################
## StrongARM Systems
#########################################################################
-LIST_SA="assabet dnp1110 gcplus lart shannon"
+LIST_SA=" \
+ assabet \
+ dnp1110 \
+ gcplus \
+ lart \
+ shannon \
+"
#########################################################################
## ARM7 Systems
#########################################################################
-LIST_ARM7=" \
- armadillo B2 ep7312 evb4510 \
- impa7 integratorap ap7 ap720t \
- lpc2292sodimm modnet50 SMN42 \
+LIST_ARM7=" \
+ ap7 \
+ ap720t \
+ armadillo \
+ B2 \
+ ep7312 \
+ evb4510 \
+ impa7 \
+ integratorap \
+ lpc2292sodimm \
+ modnet50 \
+ SMN42 \
"
#########################################################################
## ARM9 Systems
#########################################################################
-LIST_ARM9=" \
- at91rm9200dk cmc_pu2 \
- ap920t ap922_XA10 ap926ejs ap946es \
- ap966 cp920t cp922_XA10 cp926ejs \
- cp946es cp966 lpd7a400 mp2usb \
- mx1ads mx1fs2 netstar omap1510inn \
- omap1610h2 omap1610inn omap730p2 sbc2410x \
- scb9328 smdk2400 smdk2410 trab \
- VCMA9 versatile versatileab versatilepb \
- voiceblue \
+LIST_ARM9=" \
+ at91rm9200dk \
+ cmc_pu2 \
+ ap920t \
+ ap922_XA10 \
+ ap926ejs \
+ ap946es \
+ ap966 \
+ cp920t \
+ cp922_XA10 \
+ cp926ejs \
+ cp946es \
+ cp966 \
+ lpd7a400 \
+ mp2usb \
+ mx1ads \
+ mx1fs2 \
+ netstar \
+ omap1510inn \
+ omap1610h2 \
+ omap1610inn \
+ omap730p2 \
+ sbc2410x \
+ scb9328 \
+ smdk2400 \
+ smdk2410 \
+ trab \
+ VCMA9 \
+ versatile \
+ versatileab \
+ versatilepb \
+ voiceblue \
+ davinci_dvevm \
+ davinci_schmoogie \
+ davinci_sonata \
"
#########################################################################
## ARM10 Systems
#########################################################################
-LIST_ARM10=" \
- integratorcp cp1026 \
+LIST_ARM10=" \
+ integratorcp \
+ cp1026 \
"
#########################################################################
## ARM11 Systems
#########################################################################
-LIST_ARM11=" \
- cp1136 omap2420h4 \
+LIST_ARM11=" \
+ cp1136 \
+ omap2420h4 \
"
#########################################################################
## Xscale Systems
#########################################################################
-LIST_pxa=" \
- adsvix cerf250 cradle csb226 \
- delta innokom lubbock pleb2 \
- pxa255_idp wepep250 xaeniax xm250 \
- xsengine zylonite \
+LIST_pxa=" \
+ adsvix \
+ cerf250 \
+ cradle \
+ csb226 \
+ delta \
+ innokom \
+ lubbock \
+ pleb2 \
+ pxa255_idp \
+ wepep250 \
+ xaeniax \
+ xm250 \
+ xsengine \
+ zylonite \
"
-LIST_ixp="ixdp425 ixdpg425 pdnb3 scpu"
+LIST_ixp=" \
+ ixdp425 \
+ ixdpg425 \
+ pdnb3 \
+ scpu \
+"
-LIST_arm=" \
- ${LIST_SA} \
- ${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11} \
- ${LIST_pxa} ${LIST_ixp} \
+LIST_arm=" \
+ ${LIST_SA} \
+ ${LIST_ARM7} \
+ ${LIST_ARM9} \
+ ${LIST_ARM10} \
+ ${LIST_ARM11} \
+ ${LIST_pxa} \
+ ${LIST_ixp} \
"
#########################################################################
## MIPS Systems (default = big endian)
#########################################################################
-LIST_mips4kc="incaip"
+LIST_mips4kc=" \
+ incaip \
+"
-LIST_mips5kc="purple"
+LIST_mips5kc=" \
+ purple \
+"
-LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el gth2"
+LIST_au1xx0=" \
+ dbau1000 \
+ dbau1100 \
+ dbau1500 \
+ dbau1550 \
+ dbau1550_el \
+ gth2 \
+"
-LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
+LIST_mips=" \
+ ${LIST_mips4kc} \
+ ${LIST_mips5kc} \
+ ${LIST_au1xx0} \
+"
#########################################################################
## MIPS Systems (little endian)
@@ -277,36 +537,55 @@ LIST_mips4kc_el=""
LIST_mips5kc_el=""
-LIST_au1xx0_el="dbau1550_el"
+LIST_au1xx0_el=" \
+ dbau1550_el \
+"
-LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
+LIST_mips_el=" \
+ ${LIST_mips4kc_el} \
+ ${LIST_mips5kc_el} \
+ ${LIST_au1xx0_el} \
+"
#########################################################################
## i386 Systems
#########################################################################
-LIST_I486="sc520_cdp sc520_spunk sc520_spunk_rel"
+LIST_I486=" \
+ sc520_cdp \
+ sc520_spunk \
+ sc520_spunk_rel \
+"
-LIST_x86="${LIST_I486}"
+LIST_x86=" \
+ ${LIST_I486} \
+"
#########################################################################
## NIOS Systems
#########################################################################
-LIST_nios=" \
- ADNPESC1 ADNPESC1_base_32 \
- ADNPESC1_DNPEVA2_base_32 \
- DK1C20 DK1C20_standard_32 \
- DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20 \
+LIST_nios=" \
+ ADNPESC1 \
+ ADNPESC1_base_32 \
+ ADNPESC1_DNPEVA2_base_32\
+ DK1C20 \
+ DK1C20_standard_32 \
+ DK1S10 \
+ DK1S10_standard_32 \
+ DK1S10_mtx_ldk_20 \
"
#########################################################################
## Nios-II Systems
#########################################################################
-LIST_nios2=" \
- EP1C20 EP1S10 EP1S40 \
- PCI5441 PK1C20 \
+LIST_nios2=" \
+ EP1C20 \
+ EP1S10 \
+ EP1S40 \
+ PCI5441 \
+ PK1C20 \
"
#########################################################################
@@ -314,31 +593,44 @@ LIST_nios2=" \
#########################################################################
LIST_microblaze=" \
- suzaku ml401 xupv2p
+ suzaku \
+ ml401 \
+ xupv2p \
"
#########################################################################
## ColdFire Systems
#########################################################################
-LIST_coldfire=" \
- cobra5272 EB+MCF-EV123 EB+MCF-EV123_internal \
- idmr M5271EVB M5272C3 M5282EVB \
- TASREG r5200 M5271EVB \
+LIST_coldfire=" \
+ cobra5272 \
+ EB+MCF-EV123 \
+ EB+MCF-EV123_internal \
+ idmr \
+ M5271EVB \
+ M5272C3 \
+ M5282EVB \
+ TASREG \
+ r5200 \
"
#########################################################################
## AVR32 Systems
#########################################################################
-LIST_avr32="atstk1002"
+LIST_avr32=" \
+ atstk1002 \
+"
#########################################################################
## Blackfin Systems
#########################################################################
-LIST_blackfin=" \
- bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit \
+LIST_blackfin=" \
+ bf533-ezkit \
+ bf533-stamp \
+ bf537-stamp \
+ bf561-ezkit \
"
#-----------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index cf3fbcb..eef51cc 100644
--- a/Makefile
+++ b/Makefile
@@ -34,6 +34,7 @@ HOSTARCH := $(shell uname -m | \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/powerpc/ppc/ \
+ -e s/ppc64/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
@@ -122,7 +123,7 @@ ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
+CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
@@ -657,6 +658,9 @@ AdderII_config \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -a Adder ppc mpc8xx adder
+AdderUSB_config: unconfig
+ @./mkconfig -a AdderUSB ppc mpc8xx adder
+
ADS860_config \
FADS823_config \
FADS850SAR_config \
@@ -1662,15 +1666,18 @@ MPC8313ERDB_66_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo "...33M ..." ; \
+ echo -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo "...66M..." ; \
+ echo -n "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
+MPC8323ERDB_config: unconfig
+ @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
@@ -1678,7 +1685,7 @@ MPC832XEMDS_SLAVE_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo "... PCI HOST " ; \
+ echo -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
@@ -1687,11 +1694,11 @@ MPC832XEMDS_SLAVE_config: unconfig
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo "...33M ..." ; \
+ echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo "...66M..." ; \
+ echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
@@ -1720,7 +1727,7 @@ MPC8360EMDS_SLAVE_config: unconfig
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo "... PCI HOST " ; \
+ echo -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
@@ -1729,11 +1736,11 @@ MPC8360EMDS_SLAVE_config: unconfig
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo "...33M ..." ; \
+ echo -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo "...66M..." ; \
+ echo -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
@@ -2014,6 +2021,15 @@ omap1510inn_config : unconfig
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
+davinci_dvevm_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
+
+davinci_schmoogie_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
+
+davinci_sonata_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
diff --git a/README b/README
index 852ad72..398ea7e 100644
--- a/README
+++ b/README
@@ -228,113 +228,9 @@ build a config tool - later.
The following options need to be configured:
-- CPU Type: Define exactly one of
-
- PowerPC based CPUs:
- -------------------
- CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860
- or CONFIG_MPC5xx
- or CONFIG_MPC8220
- or CONFIG_MPC824X, CONFIG_MPC8260
- or CONFIG_MPC85xx
- or CONFIG_IOP480
- or CONFIG_405GP
- or CONFIG_405EP
- or CONFIG_440
- or CONFIG_MPC74xx
- or CONFIG_750FX
-
- ARM based CPUs:
- ---------------
- CONFIG_SA1110
- CONFIG_ARM7
- CONFIG_PXA250
- CONFIG_CPU_MONAHANS
-
- MicroBlaze based CPUs:
- ----------------------
- CONFIG_MICROBLAZE
-
- Nios-2 based CPUs:
- ----------------------
- CONFIG_NIOS2
-
- AVR32 based CPUs:
- ----------------------
- CONFIG_AT32AP
-
-- Board Type: Define exactly one of
-
- PowerPC based boards:
- ---------------------
-
- CONFIG_ADCIOP CONFIG_FPS860L CONFIG_OXC
- CONFIG_ADS860 CONFIG_GEN860T CONFIG_PCI405
- CONFIG_AMX860 CONFIG_GENIETV CONFIG_PCIPPC2
- CONFIG_AP1000 CONFIG_GTH CONFIG_PCIPPC6
- CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
- CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
- CONFIG_BC3450 CONFIG_hymod CONFIG_PM826
- CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
- CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
- CONFIG_CCM CONFIG_IP860 CONFIG_QS850
- CONFIG_CMI CONFIG_IPHASE4539 CONFIG_QS860T
- CONFIG_cogent_mpc8260 CONFIG_IVML24 CONFIG_RBC823
- CONFIG_cogent_mpc8xx CONFIG_IVML24_128 CONFIG_RPXClassic
- CONFIG_CPCI405 CONFIG_IVML24_256 CONFIG_RPXlite
- CONFIG_CPCI4052 CONFIG_IVMS8 CONFIG_RPXsuper
- CONFIG_CPCIISER4 CONFIG_IVMS8_128 CONFIG_rsdproto
- CONFIG_CPU86 CONFIG_IVMS8_256 CONFIG_sacsng
- CONFIG_CRAYL1 CONFIG_JSE CONFIG_Sandpoint8240
- CONFIG_CSB272 CONFIG_LANTEC CONFIG_Sandpoint8245
- CONFIG_CU824 CONFIG_LITE5200B CONFIG_sbc8260
- CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8560
- CONFIG_DB64360 CONFIG_MBX CONFIG_SM850
- CONFIG_DB64460 CONFIG_MBX860T CONFIG_SPD823TS
- CONFIG_DU405 CONFIG_MHPC CONFIG_STXGP3
- CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_SXNI855T
- CONFIG_EBONY CONFIG_MOUSSE CONFIG_TQM823L
- CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM8260
- CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM850L
- CONFIG_ep8260 CONFIG_MPC8540EVAL CONFIG_TQM855L
- CONFIG_ERIC CONFIG_MPC8560ADS CONFIG_TQM860L
- CONFIG_ESTEEM192E CONFIG_MUSENKI CONFIG_TTTech
- CONFIG_ETX094 CONFIG_MVS1 CONFIG_UTX8245
- CONFIG_EVB64260 CONFIG_NETPHONE CONFIG_V37
- CONFIG_FADS823 CONFIG_NETTA CONFIG_W7OLMC
- CONFIG_FADS850SAR CONFIG_NETVIA CONFIG_W7OLMG
- CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
- CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
- CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
-
- ARM based boards:
- -----------------
-
- CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
- CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
- CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
- CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
- CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730,
- CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
- CONFIG_VCMA9
-
- MicroBlaze based boards:
- ------------------------
-
- CONFIG_SUZAKU
-
- Nios-2 based boards:
- ------------------------
-
- CONFIG_PCI5441 CONFIG_PK1C20
- CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
-
- AVR32 based boards:
- -------------------
-
- CONFIG_ATSTK1000
+- CPU Type: Define exactly one, e.g. CONFIG_MPC85XX.
+
+- Board Type: Define exactly one, e.g. CONFIG_MPC8540ADS.
- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
Define exactly one of
@@ -893,6 +789,71 @@ The following options need to be configured:
CONFIG_USB_CONFIG
for differential drivers: 0x00001000
for single ended drivers: 0x00005000
+ CFG_USB_EVENT_POLL
+ May be defined to allow interrupt polling
+ instead of using asynchronous interrupts
+
+- USB Device:
+ Define the below if you wish to use the USB console.
+ Once firmware is rebuilt from a serial console issue the
+ command "setenv stdin usbtty; setenv stdout usbtty" and
+ attach your usb cable. The Unix command "dmesg" should print
+ it has found a new device. The environment variable usbtty
+ can be set to gserial or cdc_acm to enable your device to
+ appear to a USB host as a Linux gserial device or a
+ Common Device Class Abstract Control Model serial device.
+ If you select usbtty = gserial you should be able to enumerate
+ a Linux host by
+ # modprobe usbserial vendor=0xVendorID product=0xProductID
+ else if using cdc_acm, simply setting the environment
+ variable usbtty to be cdc_acm should suffice. The following
+ might be defined in YourBoardName.h
+
+ CONFIG_USB_DEVICE
+ Define this to build a UDC device
+
+ CONFIG_USB_TTY
+ Define this to have a tty type of device available to
+ talk to the UDC device
+
+ CFG_CONSOLE_IS_IN_ENV
+ Define this if you want stdin, stdout &/or stderr to
+ be set to usbtty.
+
+ mpc8xx:
+ CFG_USB_EXTC_CLK 0xBLAH
+ Derive USB clock from external clock "blah"
+ - CFG_USB_EXTC_CLK 0x02
+
+ CFG_USB_BRG_CLK 0xBLAH
+ Derive USB clock from brgclk
+ - CFG_USB_BRG_CLK 0x04
+
+ If you have a USB-IF assigned VendorID then you may wish to
+ define your own vendor specific values either in BoardName.h
+ or directly in usbd_vendor_info.h. If you don't define
+ CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
+ CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
+ should pretend to be a Linux device to it's target host.
+
+ CONFIG_USBD_MANUFACTURER
+ Define this string as the name of your company for
+ - CONFIG_USBD_MANUFACTURER "my company"
+
+ CONFIG_USBD_PRODUCT_NAME
+ Define this string as the name of your product
+ - CONFIG_USBD_PRODUCT_NAME "acme usb device"
+
+ CONFIG_USBD_VENDORID
+ Define this as your assigned Vendor ID from the USB
+ Implementors Forum. This *must* be a genuine Vendor ID
+ to avoid polluting the USB namespace.
+ - CONFIG_USBD_VENDORID 0xFFFF
+
+ CONFIG_USBD_PRODUCTID
+ Define this as the unique Product ID
+ for your device
+ - CONFIG_USBD_PRODUCTID 0xFFFF
- MMC Support:
@@ -2426,34 +2387,7 @@ is done by typing:
make NAME_config
where "NAME_config" is the name of one of the existing
-configurations; the following names are supported:
-
- ADCIOP_config FPS860L_config omap730p2_config
- ADS860_config GEN860T_config pcu_e_config
- Alaska8220_config
- AR405_config GENIETV_config PIP405_config
- at91rm9200dk_config GTH_config QS823_config
- CANBT_config hermes_config QS850_config
- cmi_mpc5xx_config hymod_config QS860T_config
- cogent_common_config IP860_config RPXlite_config
- cogent_mpc8260_config IVML24_config RPXlite_DW_config
- cogent_mpc8xx_config IVMS8_config RPXsuper_config
- CPCI405_config JSE_config rsdproto_config
- CPCIISER4_config LANTEC_config Sandpoint8240_config
- csb272_config lwmon_config sbc8260_config
- CU824_config MBX860T_config sbc8560_33_config
- DUET_ADS_config MBX_config sbc8560_66_config
- EBONY_config mpc7448hpc2_config SM850_config
- ELPT860_config MPC8260ADS_config SPD823TS_config
- ESTEEM192E_config MPC8540ADS_config stxgp3_config
- ETX094_config MPC8540EVAL_config SXNI855T_config
- FADS823_config NMPC8560ADS_config TQM823L_config
- FADS850SAR_config NETVIA_config TQM850L_config
- FADS860T_config omap1510inn_config TQM855L_config
- FPS850L_config omap1610h2_config TQM860L_config
- omap1610inn_config walnut_config
- omap5912osk_config Yukon8220_config
- omap2420h4_config ZPC1900_config
+configurations; see the main Makefile for supported names.
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/davinci/dv-evm/Makefile b/board/davinci/dv-evm/Makefile
new file mode 100644
index 0000000..fa00138
--- /dev/null
+++ b/board/davinci/dv-evm/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := dv_board.o
+SOBJS := board_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/dv-evm/board_init.S b/board/davinci/dv-evm/board_init.S
new file mode 100644
index 0000000..22d8adc
--- /dev/null
+++ b/board/davinci/dv-evm/board_init.S
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl dv_board_init
+dv_board_init:
+
+ mov pc, lr
diff --git a/board/davinci/dv-evm/config.mk b/board/davinci/dv-evm/config.mk
new file mode 100644
index 0000000..aa89d0e
--- /dev/null
+++ b/board/davinci/dv-evm/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Swaminathan <swami.iyer@ti.com>
+#
+# Davinci EVM board (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Davinci EVM has 1 bank of 256 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 9000'0000
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# Visioneering Corp. Sonata board (ARM926EJS) cpu
+#
+# Sonata board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
+#
+# Schmoogie board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+# we load ourself to 8108 '0000
+#
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c
new file mode 100644
index 0000000..94925ec
--- /dev/null
+++ b/board/davinci/dv-evm/dv_board.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define MACH_TYPE_DAVINCI_EVM 901
+
+extern void i2c_init(int speed, int slaveaddr);
+extern void timer_init(void);
+extern int eth_hw_init(void);
+extern phy_t phy;
+
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01) {;}
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ if ( (id == DAVINCI_LPSC_VPSSSLV) ||
+ (id == DAVINCI_LPSC_EMAC) ||
+ (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
+ (id == DAVINCI_LPSC_MDIO) ||
+ (id == DAVINCI_LPSC_USB) ||
+ (id == DAVINCI_LPSC_ATA) ||
+ (id == DAVINCI_LPSC_VLYNQ) ||
+ (id == DAVINCI_LPSC_UHPI) ||
+ (id == DAVINCI_LPSC_DDR_EMIF) ||
+ (id == DAVINCI_LPSC_AEMIF) ||
+ (id == DAVINCI_LPSC_MMC_SD) ||
+ (id == DAVINCI_LPSC_MEMSTICK) ||
+ (id == DAVINCI_LPSC_McBSP) ||
+ (id == DAVINCI_LPSC_GPIO)
+ )
+ *mdctl |= 0x200;
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03) {;}
+ while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
+}
+
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_EVM;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+ /* Powerup the DSP */
+ dsp_on();
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r (void)
+{
+ u_int8_t tmp[20], buf[10];
+ int i = 0;
+ int clk = 0;
+
+ clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+ printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
+ printf ("DDR Clock : %dMHz\n", (clk / 2));
+
+ /* Set Ethernet MAC address from EEPROM */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
+ printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
+ } else {
+ tmp[0] = 0xff;
+ for (i = 0; i < 6; i++)
+ tmp[0] &= buf[i];
+
+ if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
+ sprintf((char *)&tmp[0], "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ setenv("ethaddr", (char *)&tmp[0]);
+ }
+ }
+
+ if (!eth_hw_init()) {
+ printf("ethernet init failed!\n");
+ } else {
+ printf("ETH PHY : %s\n", phy.name);
+ }
+
+ i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1);
+
+ setenv ("videostd", ((i & 0x80) ? "pal" : "ntsc"));
+
+ return(0);
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
diff --git a/board/davinci/dv-evm/u-boot.lds b/board/davinci/dv-evm/u-boot.lds
new file mode 100644
index 0000000..710b2a2
--- /dev/null
+++ b/board/davinci/dv-evm/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .data : { *(.data) }
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/davinci/schmoogie/Makefile b/board/davinci/schmoogie/Makefile
new file mode 100644
index 0000000..fa00138
--- /dev/null
+++ b/board/davinci/schmoogie/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := dv_board.o
+SOBJS := board_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/schmoogie/board_init.S b/board/davinci/schmoogie/board_init.S
new file mode 100644
index 0000000..22d8adc
--- /dev/null
+++ b/board/davinci/schmoogie/board_init.S
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl dv_board_init
+dv_board_init:
+
+ mov pc, lr
diff --git a/board/davinci/schmoogie/config.mk b/board/davinci/schmoogie/config.mk
new file mode 100644
index 0000000..aa89d0e
--- /dev/null
+++ b/board/davinci/schmoogie/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Swaminathan <swami.iyer@ti.com>
+#
+# Davinci EVM board (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Davinci EVM has 1 bank of 256 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 9000'0000
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# Visioneering Corp. Sonata board (ARM926EJS) cpu
+#
+# Sonata board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
+#
+# Schmoogie board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+# we load ourself to 8108 '0000
+#
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c
new file mode 100644
index 0000000..b15c5f7
--- /dev/null
+++ b/board/davinci/schmoogie/dv_board.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define MACH_TYPE_SCHMOOGIE 1255
+
+extern void i2c_init(int speed, int slaveaddr);
+extern void timer_init(void);
+extern int eth_hw_init(void);
+extern phy_t phy;
+
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01) {;}
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ if ( (id == DAVINCI_LPSC_VPSSSLV) ||
+ (id == DAVINCI_LPSC_EMAC) ||
+ (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
+ (id == DAVINCI_LPSC_MDIO) ||
+ (id == DAVINCI_LPSC_USB) ||
+ (id == DAVINCI_LPSC_ATA) ||
+ (id == DAVINCI_LPSC_VLYNQ) ||
+ (id == DAVINCI_LPSC_UHPI) ||
+ (id == DAVINCI_LPSC_DDR_EMIF) ||
+ (id == DAVINCI_LPSC_AEMIF) ||
+ (id == DAVINCI_LPSC_MMC_SD) ||
+ (id == DAVINCI_LPSC_MEMSTICK) ||
+ (id == DAVINCI_LPSC_McBSP) ||
+ (id == DAVINCI_LPSC_GPIO)
+ )
+ *mdctl |= 0x200;
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03) {;}
+ while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
+}
+
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_SCHMOOGIE;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+ /* Powerup the DSP */
+ dsp_on();
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r (void)
+{
+ u_int8_t tmp[20], buf[10];
+ int i = 0;
+ int clk = 0;
+
+ /* Set serial number from UID chip */
+ u_int8_t crc_tbl[256] = {
+ 0x00, 0x5e, 0xbc, 0xe2, 0x61, 0x3f, 0xdd, 0x83,
+ 0xc2, 0x9c, 0x7e, 0x20, 0xa3, 0xfd, 0x1f, 0x41,
+ 0x9d, 0xc3, 0x21, 0x7f, 0xfc, 0xa2, 0x40, 0x1e,
+ 0x5f, 0x01, 0xe3, 0xbd, 0x3e, 0x60, 0x82, 0xdc,
+ 0x23, 0x7d, 0x9f, 0xc1, 0x42, 0x1c, 0xfe, 0xa0,
+ 0xe1, 0xbf, 0x5d, 0x03, 0x80, 0xde, 0x3c, 0x62,
+ 0xbe, 0xe0, 0x02, 0x5c, 0xdf, 0x81, 0x63, 0x3d,
+ 0x7c, 0x22, 0xc0, 0x9e, 0x1d, 0x43, 0xa1, 0xff,
+ 0x46, 0x18, 0xfa, 0xa4, 0x27, 0x79, 0x9b, 0xc5,
+ 0x84, 0xda, 0x38, 0x66, 0xe5, 0xbb, 0x59, 0x07,
+ 0xdb, 0x85, 0x67, 0x39, 0xba, 0xe4, 0x06, 0x58,
+ 0x19, 0x47, 0xa5, 0xfb, 0x78, 0x26, 0xc4, 0x9a,
+ 0x65, 0x3b, 0xd9, 0x87, 0x04, 0x5a, 0xb8, 0xe6,
+ 0xa7, 0xf9, 0x1b, 0x45, 0xc6, 0x98, 0x7a, 0x24,
+ 0xf8, 0xa6, 0x44, 0x1a, 0x99, 0xc7, 0x25, 0x7b,
+ 0x3a, 0x64, 0x86, 0xd8, 0x5b, 0x05, 0xe7, 0xb9,
+ 0x8c, 0xd2, 0x30, 0x6e, 0xed, 0xb3, 0x51, 0x0f,
+ 0x4e, 0x10, 0xf2, 0xac, 0x2f, 0x71, 0x93, 0xcd,
+ 0x11, 0x4f, 0xad, 0xf3, 0x70, 0x2e, 0xcc, 0x92,
+ 0xd3, 0x8d, 0x6f, 0x31, 0xb2, 0xec, 0x0e, 0x50,
+ 0xaf, 0xf1, 0x13, 0x4d, 0xce, 0x90, 0x72, 0x2c,
+ 0x6d, 0x33, 0xd1, 0x8f, 0x0c, 0x52, 0xb0, 0xee,
+ 0x32, 0x6c, 0x8e, 0xd0, 0x53, 0x0d, 0xef, 0xb1,
+ 0xf0, 0xae, 0x4c, 0x12, 0x91, 0xcf, 0x2d, 0x73,
+ 0xca, 0x94, 0x76, 0x28, 0xab, 0xf5, 0x17, 0x49,
+ 0x08, 0x56, 0xb4, 0xea, 0x69, 0x37, 0xd5, 0x8b,
+ 0x57, 0x09, 0xeb, 0xb5, 0x36, 0x68, 0x8a, 0xd4,
+ 0x95, 0xcb, 0x29, 0x77, 0xf4, 0xaa, 0x48, 0x16,
+ 0xe9, 0xb7, 0x55, 0x0b, 0x88, 0xd6, 0x34, 0x6a,
+ 0x2b, 0x75, 0x97, 0xc9, 0x4a, 0x14, 0xf6, 0xa8,
+ 0x74, 0x2a, 0xc8, 0x96, 0x15, 0x4b, 0xa9, 0xf7,
+ 0xb6, 0xe8, 0x0a, 0x54, 0xd7, 0x89, 0x6b, 0x35
+ };
+
+ clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+ printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
+ printf ("DDR Clock : %dMHz\n", (clk / 2));
+
+ /* Set serial number from UID chip */
+ if (i2c_read(CFG_UID_ADDR, 0, 1, buf, 8)) {
+ printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+ forceenv("serial#", "FAILED");
+ } else {
+ if (buf[0] != 0x70) { /* Device Family Code */
+ printf("\nUID @ 0x%02x read FAILED!!!\n", CFG_UID_ADDR);
+ forceenv("serial#", "FAILED");
+ }
+ }
+ /* Now check CRC */
+ tmp[0] = 0;
+ for (i = 0; i < 8; i++)
+ tmp[0] = crc_tbl[tmp[0] ^ buf[i]];
+
+ if (tmp[0] != 0) {
+ printf("\nUID @ 0x%02x - BAD CRC!!!\n", CFG_UID_ADDR);
+ forceenv("serial#", "FAILED");
+ } else {
+ /* CRC OK, set "serial" env variable */
+ sprintf((char *)&tmp[0], "%02hhx%02hhx%02hhx%02hhx%02hhx%02hhx",
+ buf[6], buf[5], buf[4], buf[3], buf[2], buf[1]);
+ forceenv("serial#", (char *)&tmp[0]);
+ }
+
+ if (!eth_hw_init()) {
+ printf("ethernet init failed!\n");
+ } else {
+ printf("ETH PHY : %s\n", phy.name);
+ }
+
+ return(0);
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
diff --git a/board/davinci/schmoogie/u-boot.lds b/board/davinci/schmoogie/u-boot.lds
new file mode 100644
index 0000000..710b2a2
--- /dev/null
+++ b/board/davinci/schmoogie/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .data : { *(.data) }
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/davinci/sonata/Makefile b/board/davinci/sonata/Makefile
new file mode 100644
index 0000000..fa00138
--- /dev/null
+++ b/board/davinci/sonata/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := dv_board.o
+SOBJS := board_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/davinci/sonata/board_init.S b/board/davinci/sonata/board_init.S
new file mode 100644
index 0000000..fbb9ea7
--- /dev/null
+++ b/board/davinci/sonata/board_init.S
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Board-specific low level initialization code. Called at the very end
+ * of cpu/arm926ejs/davinci/lowlevel_init.S. Just returns if there is no
+ * initialization required.
+ *
+ * For _OLDER_ Sonata boards sets up GPIO4 to control NAND WP line. Newer
+ * Sonata boards, AFAIK, don't use this so it's just return by default. Ask
+ * Visioneering if they reinvented the wheel once again to make sure :)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl dv_board_init
+dv_board_init:
+#ifdef SONATA_BOARD_GPIOWP
+ /* Set PINMUX0 to enable GPIO4 */
+ ldr r0, _PINMUX0
+ ldr r1, GPIO4_EN_MASK
+ ldr r2, [r0]
+ and r2, r2, r1
+ str r2, [r0]
+
+ /* Enable GPIO LPSC module */
+ ldr r0, PTSTAT
+
+gpio_ptstat_loop1:
+ ldr r2, [r0]
+ tst r2, $0x00000001
+ bne gpio_ptstat_loop1
+
+ ldr r1, MDCTL_GPIO
+ ldr r2, [r1]
+ and r2, r2, $0xfffffff8
+ orr r2, r2, $0x00000003
+ str r2, [r1]
+
+ orr r2, r2, $0x00000200
+ str r2, [r1]
+
+ ldr r1, PTCMD
+ mov r2, $0x00000001
+ str r2, [r1]
+
+gpio_ptstat_loop2:
+ ldr r2, [r0]
+ tst r2, $0x00000001
+ bne gpio_ptstat_loop2
+
+ ldr r0, MDSTAT_GPIO
+gpio_mdstat_loop:
+ ldr r2, [r0]
+ and r2, r2, $0x0000001f
+ teq r2, $0x00000003
+ bne gpio_mdstat_loop
+
+ /* GPIO4 -> output */
+ ldr r0, GPIO_DIR01
+ mov r1, $0x10
+ ldr r2, [r0]
+ bic r2, r2, r0
+ str r2, [r0]
+
+ /* Set it to 0 (Write Protect) */
+ ldr r0, GPIO_CLR_DATA01
+ str r1, [r0]
+#endif
+
+ mov pc, lr
+
+#ifdef SONATA_BOARD_GPIOWP
+.ltorg
+
+GPIO4_EN_MASK:
+ .word 0xf77fffff
+MDCTL_GPIO:
+ .word 0x01c41a68
+MDSTAT_GPIO:
+ .word 0x01c41868
+GPIO_DIR01:
+ .word 0x01c67010
+GPIO_CLR_DATA01:
+ .word 0x01c6701c
+#endif
diff --git a/board/davinci/sonata/config.mk b/board/davinci/sonata/config.mk
new file mode 100644
index 0000000..aa89d0e
--- /dev/null
+++ b/board/davinci/sonata/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# (C) Copyright 2003
+# Texas Instruments, <www.ti.com>
+# Swaminathan <swami.iyer@ti.com>
+#
+# Davinci EVM board (ARM925EJS) cpu
+# see http://www.ti.com/ for more information on Texas Instruments
+#
+# Davinci EVM has 1 bank of 256 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 9000'0000
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# Visioneering Corp. Sonata board (ARM926EJS) cpu
+#
+# Sonata board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Razorstream, LLC. SCHMOOGIE board (ARM926EJS) cpu
+#
+# Schmoogie board has 1 bank of 128 MB DDR RAM
+# Physical Address:
+# 8000'0000 to 8800'0000
+#
+# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
+# (mem base + reserved)
+#
+# we load ourself to 8108 '0000
+#
+#
+
+#Provide at least 16MB spacing between us and the Linux Kernel image
+TEXT_BASE = 0x81080000
diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c
new file mode 100644
index 0000000..7b0a459
--- /dev/null
+++ b/board/davinci/sonata/dv_board.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts are shamelessly stolen from various TI sources, original copyright
+ * follows:
+ * -----------------------------------------------------------------
+ *
+ * Copyright (C) 2004 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/emac_defs.h>
+
+#define MACH_TYPE_SONATA 1254
+
+extern void i2c_init(int speed, int slaveaddr);
+extern void timer_init(void);
+extern int eth_hw_init(void);
+extern phy_t phy;
+
+
+/* Works on Always On power domain only (no PD argument) */
+void lpsc_on(unsigned int id)
+{
+ dv_reg_p mdstat, mdctl;
+
+ if (id >= DAVINCI_LPSC_GEM)
+ return; /* Don't work on DSP Power Domain */
+
+ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4));
+ mdctl = REG_P(PSC_MDCTL_BASE + (id * 4));
+
+ while (REG(PSC_PTSTAT) & 0x01) {;}
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ /* Special treatment for some modules as for sprue14 p.7.4.2 */
+ if ( (id == DAVINCI_LPSC_VPSSSLV) ||
+ (id == DAVINCI_LPSC_EMAC) ||
+ (id == DAVINCI_LPSC_EMAC_WRAPPER) ||
+ (id == DAVINCI_LPSC_MDIO) ||
+ (id == DAVINCI_LPSC_USB) ||
+ (id == DAVINCI_LPSC_ATA) ||
+ (id == DAVINCI_LPSC_VLYNQ) ||
+ (id == DAVINCI_LPSC_UHPI) ||
+ (id == DAVINCI_LPSC_DDR_EMIF) ||
+ (id == DAVINCI_LPSC_AEMIF) ||
+ (id == DAVINCI_LPSC_MMC_SD) ||
+ (id == DAVINCI_LPSC_MEMSTICK) ||
+ (id == DAVINCI_LPSC_McBSP) ||
+ (id == DAVINCI_LPSC_GPIO)
+ )
+ *mdctl |= 0x200;
+
+ REG(PSC_PTCMD) = 0x01;
+
+ while (REG(PSC_PTSTAT) & 0x03) {;}
+ while ((*mdstat & 0x1f) != 0x03) {;} /* Probably an overkill... */
+}
+
+void dsp_on(void)
+{
+ int i;
+
+ if (REG(PSC_PDSTAT1) & 0x1f)
+ return; /* Already on */
+
+ REG(PSC_GBLCTL) |= 0x01;
+ REG(PSC_PDCTL1) |= 0x01;
+ REG(PSC_PDCTL1) &= ~0x100;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_GEM * 4)) &= 0xfffffeff;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) |= 0x03;
+ REG(PSC_MDCTL_BASE + (DAVINCI_LPSC_IMCOP * 4)) &= 0xfffffeff;
+ REG(PSC_PTCMD) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (REG(PSC_EPCPR) & 0x02)
+ break;
+ }
+
+ REG(PSC_CHP_SHRTSW) = 0x01;
+ REG(PSC_PDCTL1) |= 0x100;
+ REG(PSC_EPCCR) = 0x02;
+
+ for (i = 0; i < 100; i++) {
+ if (!(REG(PSC_PTSTAT) & 0x02))
+ break;
+ }
+
+ REG(PSC_GBLCTL) &= ~0x1f;
+}
+
+
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /* arch number of the board */
+ gd->bd->bi_arch_number = MACH_TYPE_SONATA;
+
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ /* Workaround for TMS320DM6446 errata 1.3.22 */
+ REG(PSC_SILVER_BULLET) = 0;
+
+ /* Power on required peripherals */
+ lpsc_on(DAVINCI_LPSC_EMAC);
+ lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
+ lpsc_on(DAVINCI_LPSC_MDIO);
+ lpsc_on(DAVINCI_LPSC_I2C);
+ lpsc_on(DAVINCI_LPSC_UART0);
+ lpsc_on(DAVINCI_LPSC_TIMER1);
+ lpsc_on(DAVINCI_LPSC_GPIO);
+
+ /* Powerup the DSP */
+ dsp_on();
+
+ /* Bringup UART0 out of reset */
+ REG(UART0_PWREMU_MGMT) = 0x0000e003;
+
+ /* Enable GIO3.3V cells used for EMAC */
+ REG(VDD3P3V_PWDN) = 0;
+
+ /* Enable UART0 MUX lines */
+ REG(PINMUX1) |= 1;
+
+ /* Enable EMAC and AEMIF pins */
+ REG(PINMUX0) = 0x80000c1f;
+
+ /* Enable I2C pin Mux */
+ REG(PINMUX1) |= (1 << 7);
+
+ /* Set the Bus Priority Register to appropriate value */
+ REG(VBPR) = 0x20;
+
+ timer_init();
+
+ return(0);
+}
+
+int misc_init_r (void)
+{
+ u_int8_t tmp[20], buf[10];
+ int i = 0;
+ int clk = 0;
+
+
+ clk = ((REG(PLL2_PLLM) + 1) * 27) / ((REG(PLL2_DIV2) & 0x1f) + 1);
+
+ printf ("ARM Clock : %dMHz\n", ((REG(PLL1_PLLM) + 1) * 27 ) / 2);
+ printf ("DDR Clock : %dMHz\n", (clk / 2));
+
+ /* Set Ethernet MAC address from EEPROM */
+ if (i2c_read(CFG_I2C_EEPROM_ADDR, 0x7f00, CFG_I2C_EEPROM_ADDR_LEN, buf, 6)) {
+ printf("\nEEPROM @ 0x%02x read FAILED!!!\n", CFG_I2C_EEPROM_ADDR);
+ } else {
+ tmp[0] = 0xff;
+ for (i = 0; i < 6; i++)
+ tmp[0] &= buf[i];
+
+ if ((tmp[0] != 0xff) && (getenv("ethaddr") == NULL)) {
+ sprintf((char *)&tmp[0], "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]);
+ setenv("ethaddr", (char *)&tmp[0]);
+ }
+ }
+
+ if (!eth_hw_init()) {
+ printf("ethernet init failed!\n");
+ } else {
+ printf("ETH PHY : %s\n", phy.name);
+ }
+
+ return(0);
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return(0);
+}
diff --git a/board/davinci/sonata/u-boot.lds b/board/davinci/sonata/u-boot.lds
new file mode 100644
index 0000000..710b2a2
--- /dev/null
+++ b/board/davinci/sonata/u-boot.lds
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+ . = ALIGN(4);
+ .text :
+ {
+ cpu/arm926ejs/start.o (.text)
+ *(.text)
+ }
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+ . = ALIGN(4);
+ .data : { *(.data) }
+ . = ALIGN(4);
+ .got : { *(.got) }
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+ __bss_start = .;
+ .bss : { *(.bss) }
+ _end = .;
+}
diff --git a/board/delta/delta.c b/board/delta/delta.c
index b127ac8..6e22774 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -1,10 +1,6 @@
/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2006
+ * DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -98,7 +94,6 @@ int board_late_init(void)
return 0;
}
-
/*
* Magic Key Handling, mainly copied from board/lwmon/lwmon.c
*/
@@ -324,6 +319,12 @@ static void init_DA9030()
return;
}
+ val = 0x80;
+ if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
+ printf("Error accessing DA9030 via i2c.\n");
+ return;
+ }
+
i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
diff --git a/board/freescale/mpc8323erdb/Makefile b/board/freescale/mpc8323erdb/Makefile
new file mode 100644
index 0000000..acc9544
--- /dev/null
+++ b/board/freescale/mpc8323erdb/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mpc8323erdb/config.mk b/board/freescale/mpc8323erdb/config.mk
new file mode 100644
index 0000000..fe0d37d
--- /dev/null
+++ b/board/freescale/mpc8323erdb/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8323ERDB
+#
+
+TEXT_BASE = 0xFE000000
diff --git a/board/freescale/mpc8323erdb/mpc8323erdb.c b/board/freescale/mpc8323erdb/mpc8323erdb.c
new file mode 100644
index 0000000..1886f19
--- /dev/null
+++ b/board/freescale/mpc8323erdb/mpc8323erdb.c
@@ -0,0 +1,217 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Michael Barkowski <michael.barkowski@freescale.com>
+ * Based on mpc832xmds file by Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <command.h>
+#include <libfdt.h>
+#include <libfdt_env.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#else
+#include <asm/mmu.h>
+#endif
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+ /* UCC3 */
+ {1, 0, 1, 0, 1}, /* TxD0 */
+ {1, 1, 1, 0, 1}, /* TxD1 */
+ {1, 2, 1, 0, 1}, /* TxD2 */
+ {1, 3, 1, 0, 1}, /* TxD3 */
+ {1, 9, 1, 0, 1}, /* TxER */
+ {1, 12, 1, 0, 1}, /* TxEN */
+ {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */
+
+ {1, 4, 2, 0, 1}, /* RxD0 */
+ {1, 5, 2, 0, 1}, /* RxD1 */
+ {1, 6, 2, 0, 1}, /* RxD2 */
+ {1, 7, 2, 0, 1}, /* RxD3 */
+ {1, 8, 2, 0, 1}, /* RxER */
+ {1, 10, 2, 0, 1}, /* RxDV */
+ {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */
+ {1, 11, 2, 0, 1}, /* COL */
+ {1, 13, 2, 0, 1}, /* CRS */
+
+ /* UCC2 */
+ {0, 18, 1, 0, 1}, /* TxD0 */
+ {0, 19, 1, 0, 1}, /* TxD1 */
+ {0, 20, 1, 0, 1}, /* TxD2 */
+ {0, 21, 1, 0, 1}, /* TxD3 */
+ {0, 27, 1, 0, 1}, /* TxER */
+ {0, 30, 1, 0, 1}, /* TxEN */
+ {3, 23, 2, 0, 1}, /* TxCLK->CLK3 */
+
+ {0, 22, 2, 0, 1}, /* RxD0 */
+ {0, 23, 2, 0, 1}, /* RxD1 */
+ {0, 24, 2, 0, 1}, /* RxD2 */
+ {0, 25, 2, 0, 1}, /* RxD3 */
+ {0, 26, 1, 0, 1}, /* RxER */
+ {0, 28, 2, 0, 1}, /* Rx_DV */
+ {3, 21, 2, 0, 1}, /* RxCLK->CLK16 */
+ {0, 29, 2, 0, 1}, /* COL */
+ {0, 31, 2, 0, 1}, /* CRS */
+
+ {3, 4, 3, 0, 2}, /* MDIO */
+ {3, 5, 1, 0, 2}, /* MDC */
+
+ {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+ /* DDR SDRAM - Main SODIMM */
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+
+ msize = fixed_sdram();
+
+ puts("\n DDR RAM: ");
+
+ /* return total bus SDRAM size(bytes) -- DDR */
+ return (msize * 1024 * 1024);
+}
+
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+ u32 ddr_size;
+ u32 ddr_size_log2;
+
+ msize = CFG_DDR_SIZE;
+ for (ddr_size = msize << 20, ddr_size_log2 = 0;
+ (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
+ if (ddr_size & 1) {
+ return -1;
+ }
+ }
+ im->sysconf.ddrlaw[0].ar =
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+ im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
+ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ __asm__ __volatile__ ("sync");
+ udelay(200);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ __asm__ __volatile__ ("sync");
+ return msize;
+}
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC8323ERDB\n");
+ return 0;
+}
+
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI1_MEM_BASE,
+ phys_start: CFG_PCI1_MEM_PHYS,
+ size: CFG_PCI1_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI1_MMIO_BASE,
+ phys_start: CFG_PCI1_MMIO_PHYS,
+ size: CFG_PCI1_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI1_IO_BASE,
+ phys_start: CFG_PCI1_IO_PHYS,
+ size: CFG_PCI1_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+
+ /* Enable all 3 PCI_CLK_OUTPUTs. */
+ clk->occr |= 0xe0000000;
+
+ /* Configure PCI Local Access Windows */
+ pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ mpc83xx_pci_init(1, reg, 0);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+/*
+ * Prototypes of functions that we use.
+ */
+void ft_cpu_setup(void *blob, bd_t *bd);
+
+#ifdef CONFIG_PCI
+void ft_pci_setup(void *blob, bd_t *bd);
+#endif
+
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int tmp[2];
+
+ nodeoffset = fdt_find_node_by_path(blob, "/memory");
+ if (nodeoffset >= 0) {
+ tmp[0] = cpu_to_be32(bd->bi_memstart);
+ tmp[1] = cpu_to_be32(bd->bi_memsize);
+ fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
+ }
+
+ ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
index 071591e..521d1bb 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -29,7 +29,6 @@
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
-#include <command.h>
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
@@ -258,332 +257,6 @@ void sdram_init(void)
}
#endif
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr, count, val64;
- register u64 *i;
-
- if (argc > 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
-
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
-
- if (argc == 4) {
- if (strcmp(argv[1], "test") == 0) {
- addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32)addr % 8) {
- printf("Address not alligned on double word boundary\n");
- return 1;
- }
-
- disable_interrupts();
- icache_disable();
-
- for (i = addr; i < addr + count; i++) {
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* write memory location injecting errors */
- *i = 0x1122334455667788ULL;
- __asm__ __volatile__ ("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* read data, this generates ECC error */
- val64 = *i;
- __asm__ __volatile__ ("sync");
-
- /* disable errors for ECC */
- ddr->err_disable |= ~ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* re-initialize memory, write the location again
- * NOT injecting errors this time */
- *i = 0xcafecafecafecafeULL;
- __asm__ __volatile__ ("sync");
-
- /* enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- }
-
- icache_enable();
- enable_interrupts();
-
- return 0;
- }
- }
-
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
-}
-
-U_BOOT_CMD(
- ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc test <addr> <cnt> - test mem region:\n"
- " - enables injects\n"
- " - writes pattern injecting errors\n"
- " - disables injects\n"
- " - reads pattern back, generates error\n"
- " - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
void
ft_board_setup(void *blob, bd_t *bd)
diff --git a/board/mpc8349itx/config.mk b/board/mpc8349itx/config.mk
index 1901fdc..79f1765 100644
--- a/board/mpc8349itx/config.mk
+++ b/board/mpc8349itx/config.mk
@@ -29,9 +29,3 @@ sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
TEXT_BASE = 0xFEF00000
endif
-
-ifneq ($(OBJTREE),$(SRCTREE))
-# We are building u-boot in a separate directory, use generated
-# .lds script from OBJTREE directory.
-LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
-endif
diff --git a/board/mpc8360emds/mpc8360emds.c b/board/mpc8360emds/mpc8360emds.c
index 562eb8b..3fa093d 100644
--- a/board/mpc8360emds/mpc8360emds.c
+++ b/board/mpc8360emds/mpc8360emds.c
@@ -1,8 +1,6 @@
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
* Dave Liu <daveliu@freescale.com>
- * based on board/mpc8349emds/mpc8349emds.c
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -19,7 +17,6 @@
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
-#include <command.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
@@ -30,8 +27,7 @@
#endif
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#endif
@@ -103,7 +99,9 @@ int board_early_init_f(void)
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
if (immr->sysconf.spridr == SPR_8360_REV20 ||
- immr->sysconf.spridr == SPR_8360E_REV20)
+ immr->sysconf.spridr == SPR_8360E_REV20 ||
+ immr->sysconf.spridr == SPR_8360_REV21 ||
+ immr->sysconf.spridr == SPR_8360E_REV21)
bcsr[0xe] = 0x30;
return 0;
@@ -287,381 +285,6 @@ void sdram_init(void)
}
#endif
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n",
- (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
- ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
- ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
- ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
- ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr;
- u32 count;
- register u64 *i;
- u32 ret[2];
- u32 pattern[2];
- u32 writeback[2];
-
- /* The pattern is written into memory to generate error */
- pattern[0] = 0xfedcba98UL;
- pattern[1] = 0x76543210UL;
-
- /* After injecting error, re-initialize the memory with the value */
- writeback[0] = 0x01234567UL;
- writeback[1] = 0x89abcdefUL;
-
- if (argc > 4) {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, "
- "should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
- if (argc == 4) {
- if (strcmp(argv[1], "testdw") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- ppcDWstore((u32 *) i, pattern);
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* read data, this generates ECC error */
- ppcDWload((u32 *) i, ret);
- __asm__ __volatile__("sync");
-
- /* re-initialize memory, double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- if (strcmp(argv[1], "testword") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- *(u32 *) i = 0xfedcba98UL;
- __asm__ __volatile__("sync");
-
- /* sub double word write,
- * bus will read-modify-write,
- * generates ECC error */
- *((u32 *) i + 1) = 0x76543210UL;
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* re-initialize memory,
- * double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with double word access\n"
- " - disables injects\n"
- " - reads pattern back with double word access, generates error\n"
- " - re-inits memory\n"
- "ecc testword <addr> <cnt> - test mem region with word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with word access\n"
- " - writes pattern with word access, generates error\n"
- " - disables injects\n" " - re-inits memory");
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
&& defined(CONFIG_OF_BOARD_SETUP)
@@ -681,11 +304,11 @@ ft_board_setup(void *blob, bd_t *bd)
int nodeoffset;
int tmp[2];
- nodeoffset = fdt_path_offset (fdt, "/memory");
+ nodeoffset = fdt_find_node_by_path(blob, "/memory");
if (nodeoffset >= 0) {
tmp[0] = cpu_to_be32(bd->bi_memstart);
tmp[1] = cpu_to_be32(bd->bi_memsize);
- fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
+ fdt_setprop(blob, nodeoffset, "reg", tmp, sizeof(tmp));
}
#else
u32 *p;
diff --git a/board/mpc8360emds/pci.c b/board/mpc8360emds/pci.c
index 158effe..8f90471 100644
--- a/board/mpc8360emds/pci.c
+++ b/board/mpc8360emds/pci.c
@@ -20,8 +20,7 @@
#include <i2c.h>
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#endif
@@ -207,7 +206,7 @@ void pci_init_board(void)
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
- i2c_set_bus_num(1);
+ i2c_set_bus_num(1);
val8 = 0;
i2c_write(0x23, 0x6, 1, &val8, 1);
@@ -311,26 +310,25 @@ ft_pci_setup(void *blob, bd_t *bd)
int err;
int tmp[2];
- nodeoffset = fdt_path_offset (fdt, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
if (nodeoffset >= 0) {
tmp[0] = cpu_to_be32(hose[0].first_busno);
tmp[1] = cpu_to_be32(hose[0].last_busno);
- err = fdt_setprop(fdt, nodeoffset, "bus-range", tmp, sizeof(tmp));
+ err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
}
}
-#endif /* CONFIG_OF_LIBFDT */
-#ifdef CONFIG_OF_FLAT_TREE
+#elif defined(CONFIG_OF_FLAT_TREE)
void
ft_pci_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
+ u32 *p;
+ int len;
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
+ p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
+ if (p != NULL) {
p[0] = hose[0].first_busno;
p[1] = hose[0].last_busno;
- }
+ }
}
#endif /* CONFIG_OF_FLAT_TREE */
#endif /* CONFIG_PCI */
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index ef40c54..92120b0 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -34,7 +34,7 @@
#ifdef CONFIG_AUTO_UPDATE
-#ifndef CONFIG_USB_OHCI
+#ifndef CONFIG_USB_OHCI_NEW
#error "must define CONFIG_USB_OHCI"
#endif
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index de5a514..1db0fc3 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -193,7 +193,12 @@ int _do_setenv (int flag, int argc, char *argv[])
* Ethernet Address and serial# can be set only once,
* ver is readonly.
*/
+#ifdef CONFIG_HAS_UID
+ /* Allow serial# forced overwrite with 0xdeaf4add flag */
+ if ( ((strcmp (name, "serial#") == 0) && (flag != 0xdeaf4add)) ||
+#else
if ( (strcmp (name, "serial#") == 0) ||
+#endif
((strcmp (name, "ethaddr") == 0)
#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR)
&& (strcmp ((char *)env_get_addr(oldval),MK_STR(CONFIG_ETHADDR)) != 0)
@@ -397,7 +402,15 @@ void setenv (char *varname, char *varvalue)
_do_setenv (0, 3, argv);
}
-int do_setenv ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#ifdef CONFIG_HAS_UID
+void forceenv (char *varname, char *varvalue)
+{
+ char *argv[4] = { "forceenv", varname, varvalue, NULL };
+ _do_setenv (0xdeaf4add, 3, argv);
+}
+#endif
+
+int do_setenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
if (argc < 2) {
printf ("Usage:\n%s\n", cmdtp->usage);
diff --git a/common/usb_kbd.c b/common/usb_kbd.c
index 56c2166..aec558a 100644
--- a/common/usb_kbd.c
+++ b/common/usb_kbd.c
@@ -129,7 +129,11 @@ static int usb_kbd_testc(void)
static int usb_kbd_getc(void)
{
char c;
- while(usb_in_pointer==usb_out_pointer);
+ while(usb_in_pointer==usb_out_pointer) {
+#ifdef CFG_USB_EVENT_POLL
+ usb_event_poll();
+#endif
+ }
if((usb_out_pointer+1)==USB_KBD_BUFFER_LEN)
usb_out_pointer=0;
else
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
index 8d4e478..eaabad2 100644
--- a/cpu/arm920t/at91rm9200/Makefile
+++ b/cpu/arm920t/at91rm9200/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
- lxt972.o serial.o usb_ohci.o
+ lxt972.o serial.o usb.o
SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
new file mode 100644
index 0000000..366262e
--- /dev/null
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# ifdef CONFIG_AT91RM9200
+
+#include <asm/arch/hardware.h>
+
+int usb_cpu_init()
+{
+ /* Enable USB host clock. */
+ *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
+ *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ /* Initialization failed */
+ *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */
+ *AT91C_PMC_SCDR = AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ usb_cpu_stop();
+}
+
+# endif /* CONFIG_AT91RM9200 */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 3a7c4b3..0ff36c5 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).a
COBJS = i2c.o interrupts.o serial.o speed.o \
- usb_ohci.o
+ usb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
new file mode 100644
index 0000000..ef5d5bf
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+
+#if defined(CONFIG_S3C2400)
+# include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+# include <s3c2410.h>
+#endif
+
+int usb_cpu_init (void)
+{
+
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+ /*
+ * Set the 48 MHz UPLL clocking. Values are taken from
+ * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+ */
+ clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
+ gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+
+ /*
+ * Enable USB host clock.
+ */
+ clk_power->CLKCON |= (1 << 4);
+
+ return 0;
+}
+
+int usb_cpu_stop (void)
+{
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ /* may not want to do this */
+ clk_power->CLKCON &= ~(1 << 4);
+ return 0;
+}
+
+int usb_cpu_init_fail (void)
+{
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ clk_power->CLKCON &= ~(1 << 4);
+ return 0;
+}
+
+# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm926ejs/davinci/Makefile b/cpu/arm926ejs/davinci/Makefile
new file mode 100644
index 0000000..0f77f40
--- /dev/null
+++ b/cpu/arm926ejs/davinci/Makefile
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = timer.o ether.o lxt972.o dp83848.o i2c.o nand.o
+SOBJS = lowlevel_init.o reset.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/arm926ejs/davinci/dp83848.c b/cpu/arm926ejs/davinci/dp83848.c
new file mode 100644
index 0000000..5719845
--- /dev/null
+++ b/cpu/arm926ejs/davinci/dp83848.c
@@ -0,0 +1,156 @@
+/*
+ * National Semiconductor DP83848 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <dp83848.h>
+#include <asm/arch/emac_defs.h>
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+int dp83848_is_phy_connected(int phy_addr)
+{
+ u_int16_t id1, id2;
+
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))
+ return(0);
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))
+ return(0);
+
+ if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))
+ return(1);
+
+ return(0);
+}
+
+int dp83848_get_link_speed(int phy_addr)
+{
+ u_int16_t tmp;
+ volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
+
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ return(0);
+
+ if (!(tmp & DP83848_LINK_STATUS)) /* link up? */
+ return(0);
+
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))
+ return(0);
+
+ /* Speed doesn't matter, there is no setting for it in EMAC... */
+ if (tmp & DP83848_SPEED) {
+ if (tmp & DP83848_DUPLEX) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ } else {
+ if (tmp & DP83848_DUPLEX) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ }
+
+ return(0);
+}
+
+
+int dp83848_init_phy(int phy_addr)
+{
+ int ret = 1;
+
+ if (!dp83848_get_link_speed(phy_addr)) {
+ /* Try another time */
+ udelay(100000);
+ ret = dp83848_get_link_speed(phy_addr);
+ }
+
+ /* Disable PHY Interrupts */
+ dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);
+
+ return(ret);
+}
+
+
+int dp83848_auto_negotiate(int phy_addr)
+{
+ u_int16_t tmp;
+
+
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ return(0);
+
+ /* Restart Auto_negotiation */
+ tmp &= ~DP83848_AUTONEG; /* remove autonegotiation enable */
+ tmp |= DP83848_ISOLATE; /* Electrically isolate PHY */
+ dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+ /* Set the Auto_negotiation Advertisement Register
+ * MII advertising for Next page, 100BaseTxFD and HD,
+ * 10BaseTFD and HD, IEEE 802.3
+ */
+ tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |
+ DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;
+ dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);
+
+
+ /* Read Control Register */
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))
+ return(0);
+
+ tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;
+ dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+ /* Restart Auto_negotiation */
+ tmp |= DP83848_RESTART_AUTONEG;
+ dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);
+
+ /*check AutoNegotiate complete */
+ udelay(10000);
+ if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))
+ return(0);
+
+ if (!(tmp & DP83848_AUTONEG_COMP))
+ return(0);
+
+ return (dp83848_get_link_speed(phy_addr));
+}
+
+#endif /* CONFIG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c
new file mode 100644
index 0000000..32e81d1
--- /dev/null
+++ b/cpu/arm926ejs/davinci/ether.c
@@ -0,0 +1,650 @@
+/*
+ * Ethernet driver for TI TMS320DM644x (DaVinci) chips.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelessly stolen from TI's dm644x_emac.c. Original copyright
+ * follows:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.c
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver source for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, Anant Gole - Created EMAC version for uBoot.
+ * ver 1.1: Nov 2005, Anant Gole - Extended the RX logic for multiple descriptors
+ *
+ */
+#include <common.h>
+#include <command.h>
+#include <net.h>
+#include <miiphy.h>
+#include <asm/arch/emac_defs.h>
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+unsigned int emac_dbg = 0;
+#define debug_emac(fmt,args...) if (emac_dbg) printf(fmt,##args)
+
+/* Internal static functions */
+static int dm644x_eth_hw_init (void);
+static int dm644x_eth_open (void);
+static int dm644x_eth_close (void);
+static int dm644x_eth_send_packet (volatile void *packet, int length);
+static int dm644x_eth_rcv_packet (void);
+static void dm644x_eth_mdio_enable(void);
+
+static int gen_init_phy(int phy_addr);
+static int gen_is_phy_connected(int phy_addr);
+static int gen_get_link_speed(int phy_addr);
+static int gen_auto_negotiate(int phy_addr);
+
+/* Wrappers exported to the U-Boot proper */
+int eth_hw_init(void)
+{
+ return(dm644x_eth_hw_init());
+}
+
+int eth_init(bd_t * bd)
+{
+ return(dm644x_eth_open());
+}
+
+void eth_halt(void)
+{
+ dm644x_eth_close();
+}
+
+int eth_send(volatile void *packet, int length)
+{
+ return(dm644x_eth_send_packet(packet, length));
+}
+
+int eth_rx(void)
+{
+ return(dm644x_eth_rcv_packet());
+}
+
+void eth_mdio_enable(void)
+{
+ dm644x_eth_mdio_enable();
+}
+/* End of wrappers */
+
+
+static u_int8_t dm644x_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+
+/*
+ * This function must be called before emac_open() if you want to override
+ * the default mac address.
+ */
+void dm644x_eth_set_mac_addr(const u_int8_t *addr)
+{
+ int i;
+
+ for (i = 0; i < sizeof (dm644x_eth_mac_addr); i++) {
+ dm644x_eth_mac_addr[i] = addr[i];
+ }
+}
+
+/* EMAC Addresses */
+static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
+static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
+static volatile mdio_regs *adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR;
+
+/* EMAC descriptors */
+static volatile emac_desc *emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE);
+static volatile emac_desc *emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE);
+static volatile emac_desc *emac_rx_active_head = 0;
+static volatile emac_desc *emac_rx_active_tail = 0;
+static int emac_rx_queue_active = 0;
+
+/* Receive packet buffers */
+static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+
+/* PHY address for a discovered PHY (0xff - not found) */
+static volatile u_int8_t active_phy_addr = 0xff;
+
+phy_t phy;
+
+static void dm644x_eth_mdio_enable(void)
+{
+ u_int32_t clkdiv;
+
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+
+ adap_mdio->CONTROL = (clkdiv & 0xff) |
+ MDIO_CONTROL_ENABLE |
+ MDIO_CONTROL_FAULT |
+ MDIO_CONTROL_FAULT_ENABLE;
+
+ while (adap_mdio->CONTROL & MDIO_CONTROL_IDLE) {;}
+}
+
+/*
+ * Tries to find an active connected PHY. Returns 1 if address if found.
+ * If no active PHY (or more than one PHY) found returns 0.
+ * Sets active_phy_addr variable.
+ */
+static int dm644x_eth_phy_detect(void)
+{
+ u_int32_t phy_act_state;
+ int i;
+
+ active_phy_addr = 0xff;
+
+ if ((phy_act_state = adap_mdio->ALIVE) == 0)
+ return(0); /* No active PHYs */
+
+ debug_emac("dm644x_eth_phy_detect(), ALIVE = 0x%08x\n", phy_act_state);
+
+ for (i = 0; i < 32; i++) {
+ if (phy_act_state & (1 << i)) {
+ if (phy_act_state & ~(1 << i))
+ return(0); /* More than one PHY */
+ else {
+ active_phy_addr = i;
+ return(1);
+ }
+ }
+ }
+
+ return(0); /* Just to make GCC happy */
+}
+
+
+/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */
+int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data)
+{
+ int tmp;
+
+ while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
+
+ adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_READ |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16);
+
+ /* Wait for command to complete */
+ while ((tmp = adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO) {;}
+
+ if (tmp & MDIO_USERACCESS0_ACK) {
+ *data = tmp & 0xffff;
+ return(1);
+ }
+
+ *data = -1;
+ return(0);
+}
+
+/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */
+int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data)
+{
+
+ while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
+
+ adap_mdio->USERACCESS0 = MDIO_USERACCESS0_GO |
+ MDIO_USERACCESS0_WRITE_WRITE |
+ ((reg_num & 0x1f) << 21) |
+ ((phy_addr & 0x1f) << 16) |
+ (data & 0xffff);
+
+ /* Wait for command to complete */
+ while (adap_mdio->USERACCESS0 & MDIO_USERACCESS0_GO) {;}
+
+ return(1);
+}
+
+/* PHY functions for a generic PHY */
+static int gen_init_phy(int phy_addr)
+{
+ int ret = 1;
+
+ if (gen_get_link_speed(phy_addr)) {
+ /* Try another time */
+ ret = gen_get_link_speed(phy_addr);
+ }
+
+ return(ret);
+}
+
+static int gen_is_phy_connected(int phy_addr)
+{
+ u_int16_t dummy;
+
+ return(dm644x_eth_phy_read(phy_addr, PHY_PHYIDR1, &dummy));
+}
+
+static int gen_get_link_speed(int phy_addr)
+{
+ u_int16_t tmp;
+
+ if (dm644x_eth_phy_read(phy_addr, MII_STATUS_REG, &tmp) && (tmp & 0x04))
+ return(1);
+
+ return(0);
+}
+
+static int gen_auto_negotiate(int phy_addr)
+{
+ u_int16_t tmp;
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_BMCR, &tmp))
+ return(0);
+
+ /* Restart Auto_negotiation */
+ tmp |= PHY_BMCR_AUTON;
+ dm644x_eth_phy_write(phy_addr, PHY_BMCR, tmp);
+
+ /*check AutoNegotiate complete */
+ udelay (10000);
+ if (!dm644x_eth_phy_read(phy_addr, PHY_BMSR, &tmp))
+ return(0);
+
+ if (!(tmp & PHY_BMSR_AUTN_COMP))
+ return(0);
+
+ return(gen_get_link_speed(phy_addr));
+}
+/* End of generic PHY functions */
+
+
+#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
+{
+ return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);
+}
+
+static int dm644x_mii_phy_write(char *devname, unsigned char addr, unsigned char reg, unsigned short value)
+{
+ return(dm644x_eth_phy_write(addr, reg, value) ? 0 : 1);
+}
+
+int dm644x_eth_miiphy_initialize(bd_t *bis)
+{
+ miiphy_register(phy.name, dm644x_mii_phy_read, dm644x_mii_phy_write);
+
+ return(1);
+}
+#endif
+
+/*
+ * This function initializes the emac hardware. It does NOT initialize
+ * EMAC modules power or pin multiplexors, that is done by board_init()
+ * much earlier in bootup process. Returns 1 on success, 0 otherwise.
+ */
+static int dm644x_eth_hw_init(void)
+{
+ u_int32_t phy_id;
+ u_int16_t tmp;
+ int i;
+
+ dm644x_eth_mdio_enable();
+
+ for (i = 0; i < 256; i++) {
+ if (adap_mdio->ALIVE)
+ break;
+ udelay(10);
+ }
+
+ if (i >= 256) {
+ printf("No ETH PHY detected!!!\n");
+ return(0);
+ }
+
+ /* Find if a PHY is connected and get it's address */
+ if (!dm644x_eth_phy_detect())
+ return(0);
+
+ /* Get PHY ID and initialize phy_ops for a detected PHY */
+ if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR1, &tmp)) {
+ active_phy_addr = 0xff;
+ return(0);
+ }
+
+ phy_id = (tmp << 16) & 0xffff0000;
+
+ if (!dm644x_eth_phy_read(active_phy_addr, PHY_PHYIDR2, &tmp)) {
+ active_phy_addr = 0xff;
+ return(0);
+ }
+
+ phy_id |= tmp & 0x0000ffff;
+
+ switch (phy_id) {
+ case PHY_LXT972:
+ sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
+ phy.init = lxt972_init_phy;
+ phy.is_phy_connected = lxt972_is_phy_connected;
+ phy.get_link_speed = lxt972_get_link_speed;
+ phy.auto_negotiate = lxt972_auto_negotiate;
+ break;
+ case PHY_DP83848:
+ sprintf(phy.name, "DP83848 @ 0x%02x", active_phy_addr);
+ phy.init = dp83848_init_phy;
+ phy.is_phy_connected = dp83848_is_phy_connected;
+ phy.get_link_speed = dp83848_get_link_speed;
+ phy.auto_negotiate = dp83848_auto_negotiate;
+ break;
+ default:
+ sprintf(phy.name, "GENERIC @ 0x%02x", active_phy_addr);
+ phy.init = gen_init_phy;
+ phy.is_phy_connected = gen_is_phy_connected;
+ phy.get_link_speed = gen_get_link_speed;
+ phy.auto_negotiate = gen_auto_negotiate;
+ }
+
+ return(1);
+}
+
+
+/* Eth device open */
+static int dm644x_eth_open(void)
+{
+ dv_reg_p addr;
+ u_int32_t clkdiv, cnt;
+ volatile emac_desc *rx_desc;
+
+ debug_emac("+ emac_open\n");
+
+ /* Reset EMAC module and disable interrupts in wrapper */
+ adap_emac->SOFTRESET = 1;
+ while (adap_emac->SOFTRESET != 0) {;}
+ adap_ewrap->EWCTL = 0;
+ for (cnt = 0; cnt < 5; cnt++) {
+ clkdiv = adap_ewrap->EWCTL;
+ }
+
+ rx_desc = emac_rx_desc;
+
+ adap_emac->TXCONTROL = 0x01;
+ adap_emac->RXCONTROL = 0x01;
+
+ /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
+ /* Using channel 0 only - other channels are disabled */
+ adap_emac->MACINDEX = 0;
+ adap_emac->MACADDRHI =
+ (dm644x_eth_mac_addr[3] << 24) |
+ (dm644x_eth_mac_addr[2] << 16) |
+ (dm644x_eth_mac_addr[1] << 8) |
+ (dm644x_eth_mac_addr[0]);
+ adap_emac->MACADDRLO =
+ (dm644x_eth_mac_addr[5] << 8) |
+ (dm644x_eth_mac_addr[4]);
+
+ adap_emac->MACHASH1 = 0;
+ adap_emac->MACHASH2 = 0;
+
+ /* Set source MAC address - REQUIRED */
+ adap_emac->MACSRCADDRHI =
+ (dm644x_eth_mac_addr[3] << 24) |
+ (dm644x_eth_mac_addr[2] << 16) |
+ (dm644x_eth_mac_addr[1] << 8) |
+ (dm644x_eth_mac_addr[0]);
+ adap_emac->MACSRCADDRLO =
+ (dm644x_eth_mac_addr[4] << 8) |
+ (dm644x_eth_mac_addr[5]);
+
+ /* Set DMA 8 TX / 8 RX Head pointers to 0 */
+ addr = &adap_emac->TX0HDP;
+ for(cnt = 0; cnt < 16; cnt++)
+ *addr++ = 0;
+
+ addr = &adap_emac->RX0HDP;
+ for(cnt = 0; cnt < 16; cnt++)
+ *addr++ = 0;
+
+ /* Clear Statistics (do this before setting MacControl register) */
+ addr = &adap_emac->RXGOODFRAMES;
+ for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++)
+ *addr++ = 0;
+
+ /* No multicast addressing */
+ adap_emac->MACHASH1 = 0;
+ adap_emac->MACHASH2 = 0;
+
+ /* Create RX queue and set receive process in place */
+ emac_rx_active_head = emac_rx_desc;
+ for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) {
+ rx_desc->next = (u_int32_t)(rx_desc + 1);
+ rx_desc->buffer = &emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
+ rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
+ rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
+ rx_desc++;
+ }
+
+ /* Set the last descriptor's "next" parameter to 0 to end the RX desc list */
+ rx_desc--;
+ rx_desc->next = 0;
+ emac_rx_active_tail = rx_desc;
+ emac_rx_queue_active = 1;
+
+ /* Enable TX/RX */
+ adap_emac->RXMAXLEN = EMAC_MAX_ETHERNET_PKT_SIZE;
+ adap_emac->RXBUFFEROFFSET = 0;
+
+ /* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */
+ adap_emac->RXMBPENABLE = EMAC_RXMBPENABLE_RXBROADEN;
+
+ /* Enable ch 0 only */
+ adap_emac->RXUNICASTSET = 0x01;
+
+ /* Enable MII interface and Full duplex mode */
+ adap_emac->MACCONTROL = (EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE);
+
+ /* Init MDIO & get link state */
+ clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1;
+ adap_mdio->CONTROL = ((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT);
+
+ if (!phy.get_link_speed(active_phy_addr))
+ return(0);
+
+ /* Start receive process */
+ adap_emac->RX0HDP = (u_int32_t)emac_rx_desc;
+
+ debug_emac("- emac_open\n");
+
+ return(1);
+}
+
+/* EMAC Channel Teardown */
+static void dm644x_eth_ch_teardown(int ch)
+{
+ dv_reg dly = 0xff;
+ dv_reg cnt;
+
+ debug_emac("+ emac_ch_teardown\n");
+
+ if (ch == EMAC_CH_TX) {
+ /* Init TX channel teardown */
+ adap_emac->TXTEARDOWN = 1;
+ for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->TX0CP) {
+ /* Wait here for Tx teardown completion interrupt to occur
+ * Note: A task delay can be called here to pend rather than
+ * occupying CPU cycles - anyway it has been found that teardown
+ * takes very few cpu cycles and does not affect functionality */
+ dly--;
+ udelay(1);
+ if (dly == 0)
+ break;
+ }
+ adap_emac->TX0CP = cnt;
+ adap_emac->TX0HDP = 0;
+ } else {
+ /* Init RX channel teardown */
+ adap_emac->RXTEARDOWN = 1;
+ for(cnt = 0; cnt != 0xfffffffc; cnt = adap_emac->RX0CP) {
+ /* Wait here for Rx teardown completion interrupt to occur
+ * Note: A task delay can be called here to pend rather than
+ * occupying CPU cycles - anyway it has been found that teardown
+ * takes very few cpu cycles and does not affect functionality */
+ dly--;
+ udelay(1);
+ if (dly == 0)
+ break;
+ }
+ adap_emac->RX0CP = cnt;
+ adap_emac->RX0HDP = 0;
+ }
+
+ debug_emac("- emac_ch_teardown\n");
+}
+
+/* Eth device close */
+static int dm644x_eth_close(void)
+{
+ debug_emac("+ emac_close\n");
+
+ dm644x_eth_ch_teardown(EMAC_CH_TX); /* TX Channel teardown */
+ dm644x_eth_ch_teardown(EMAC_CH_RX); /* RX Channel teardown */
+
+ /* Reset EMAC module and disable interrupts in wrapper */
+ adap_emac->SOFTRESET = 1;
+ adap_ewrap->EWCTL = 0;
+
+ debug_emac("- emac_close\n");
+ return(1);
+}
+
+static int tx_send_loop = 0;
+
+/*
+ * This function sends a single packet on the network and returns
+ * positive number (number of bytes transmitted) or negative for error
+ */
+static int dm644x_eth_send_packet(volatile void *packet, int length)
+{
+ int ret_status = -1;
+ tx_send_loop = 0;
+
+ /* Return error if no link */
+ if (!phy.get_link_speed(active_phy_addr))
+ {
+ printf("WARN: emac_send_packet: No link\n");
+ return (ret_status);
+ }
+
+ /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */
+ if (length < EMAC_MIN_ETHERNET_PKT_SIZE)
+ {
+ length = EMAC_MIN_ETHERNET_PKT_SIZE;
+ }
+
+ /* Populate the TX descriptor */
+ emac_tx_desc->next = 0;
+ emac_tx_desc->buffer = (u_int8_t *)packet;
+ emac_tx_desc->buff_off_len = (length & 0xffff);
+ emac_tx_desc->pkt_flag_len = ((length & 0xffff) |
+ EMAC_CPPI_SOP_BIT |
+ EMAC_CPPI_OWNERSHIP_BIT |
+ EMAC_CPPI_EOP_BIT);
+ /* Send the packet */
+ adap_emac->TX0HDP = (unsigned int)emac_tx_desc;
+
+ /* Wait for packet to complete or link down */
+ while (1) {
+ if (!phy.get_link_speed(active_phy_addr)) {
+ dm644x_eth_ch_teardown(EMAC_CH_TX);
+ return (ret_status);
+ }
+ if (adap_emac->TXINTSTATRAW & 0x01) {
+ ret_status = length;
+ break;
+ }
+ tx_send_loop++;
+ }
+
+ return(ret_status);
+}
+
+/*
+ * This function handles receipt of a packet from the network
+ */
+static int dm644x_eth_rcv_packet(void)
+{
+ volatile emac_desc *rx_curr_desc;
+ volatile emac_desc *curr_desc;
+ volatile emac_desc *tail_desc;
+ int status, ret = -1;
+
+ rx_curr_desc = emac_rx_active_head;
+ status = rx_curr_desc->pkt_flag_len;
+ if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) {
+ if (status & EMAC_CPPI_RX_ERROR_FRAME) {
+ /* Error in packet - discard it and requeue desc */
+ printf("WARN: emac_rcv_pkt: Error in packet\n");
+ } else {
+ NetReceive(rx_curr_desc->buffer, (rx_curr_desc->buff_off_len & 0xffff));
+ ret = rx_curr_desc->buff_off_len & 0xffff;
+ }
+
+ /* Ack received packet descriptor */
+ adap_emac->RX0CP = (unsigned int)rx_curr_desc;
+ curr_desc = rx_curr_desc;
+ emac_rx_active_head = (volatile emac_desc *)rx_curr_desc->next;
+
+ if (status & EMAC_CPPI_EOQ_BIT) {
+ if (emac_rx_active_head) {
+ adap_emac->RX0HDP = (unsigned int)emac_rx_active_head;
+ } else {
+ emac_rx_queue_active = 0;
+ printf("INFO:emac_rcv_packet: RX Queue not active\n");
+ }
+ }
+
+ /* Recycle RX descriptor */
+ rx_curr_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE;
+ rx_curr_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT;
+ rx_curr_desc->next = 0;
+
+ if (emac_rx_active_head == 0) {
+ printf("INFO: emac_rcv_pkt: active queue head = 0\n");
+ emac_rx_active_head = curr_desc;
+ emac_rx_active_tail = curr_desc;
+ if (emac_rx_queue_active != 0) {
+ adap_emac->RX0HDP = (unsigned int)emac_rx_active_head;
+ printf("INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n");
+ emac_rx_queue_active = 1;
+ }
+ } else {
+ tail_desc = emac_rx_active_tail;
+ emac_rx_active_tail = curr_desc;
+ tail_desc->next = (unsigned int)curr_desc;
+ status = tail_desc->pkt_flag_len;
+ if (status & EMAC_CPPI_EOQ_BIT) {
+ adap_emac->RX0HDP = (unsigned int)curr_desc;
+ status &= ~EMAC_CPPI_EOQ_BIT;
+ tail_desc->pkt_flag_len = status;
+ }
+ }
+ return(ret);
+ }
+ return(0);
+}
+
+#endif /* CONFIG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_TI_EMAC */
diff --git a/cpu/arm926ejs/davinci/i2c.c b/cpu/arm926ejs/davinci/i2c.c
new file mode 100644
index 0000000..af9dc03
--- /dev/null
+++ b/cpu/arm926ejs/davinci/i2c.c
@@ -0,0 +1,351 @@
+/*
+ * TI DaVinci (TMS320DM644x) I2C driver.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_DAVINCI_I2C
+
+#include <i2c.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/i2c_defs.h>
+
+#define CHECK_NACK() \
+ do {\
+ if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\
+ REG(I2C_CON) = 0;\
+ return(1);\
+ }\
+ } while (0)
+
+
+static int wait_for_bus(void)
+{
+ int stat, timeout;
+
+ REG(I2C_STAT) = 0xffff;
+
+ for (timeout = 0; timeout < 10; timeout++) {
+ if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {
+ REG(I2C_STAT) = 0xffff;
+ return(0);
+ }
+
+ REG(I2C_STAT) = stat;
+ udelay(50000);
+ }
+
+ REG(I2C_STAT) = 0xffff;
+ return(1);
+}
+
+
+static int poll_i2c_irq(int mask)
+{
+ int stat, timeout;
+
+ for (timeout = 0; timeout < 10; timeout++) {
+ udelay(1000);
+ stat = REG(I2C_STAT);
+ if (stat & mask) {
+ return(stat);
+ }
+ }
+
+ REG(I2C_STAT) = 0xffff;
+ return(stat | I2C_TIMEOUT);
+}
+
+
+void flush_rx(void)
+{
+ int dummy;
+
+ while (1) {
+ if (!(REG(I2C_STAT) & I2C_STAT_RRDY))
+ break;
+
+ dummy = REG(I2C_DRR);
+ REG(I2C_STAT) = I2C_STAT_RRDY;
+ udelay(1000);
+ }
+}
+
+
+void i2c_init(int speed, int slaveadd)
+{
+ u_int32_t div, psc;
+
+ if (REG(I2C_CON) & I2C_CON_EN) {
+ REG(I2C_CON) = 0;
+ udelay (50000);
+ }
+
+ psc = 2;
+ div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10; /* SCLL + SCLH */
+ REG(I2C_PSC) = psc; /* 27MHz / (2 + 1) = 9MHz */
+ REG(I2C_SCLL) = (div * 50) / 100; /* 50% Duty */
+ REG(I2C_SCLH) = div - REG(I2C_SCLL);
+
+ REG(I2C_OA) = slaveadd;
+ REG(I2C_CNT) = 0;
+
+ /* Interrupts must be enabled or I2C module won't work */
+ REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |
+ I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;
+
+ /* Now enable I2C controller (get it out of reset) */
+ REG(I2C_CON) = I2C_CON_EN;
+
+ udelay(1000);
+}
+
+
+int i2c_probe(u_int8_t chip)
+{
+ int rc = 1;
+
+ if (chip == REG(I2C_OA)) {
+ return(rc);
+ }
+
+ REG(I2C_CON) = 0;
+ if (wait_for_bus()) {return(1);}
+
+ /* try to read one byte from current (or only) address */
+ REG(I2C_CNT) = 1;
+ REG(I2C_SA) = chip;
+ REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);
+ udelay (50000);
+
+ if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {
+ rc = 0;
+ flush_rx();
+ REG(I2C_STAT) = 0xffff;
+ } else {
+ REG(I2C_STAT) = 0xffff;
+ REG(I2C_CON) |= I2C_CON_STP;
+ udelay(20000);
+ if (wait_for_bus()) {return(1);}
+ }
+
+ flush_rx();
+ REG(I2C_STAT) = 0xffff;
+ REG(I2C_CNT) = 0;
+ return(rc);
+}
+
+
+int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+{
+ u_int32_t tmp;
+ int i;
+
+ if ((alen < 0) || (alen > 2)) {
+ printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
+ return(1);
+ }
+
+ if (wait_for_bus()) {return(1);}
+
+ if (alen != 0) {
+ /* Start address phase */
+ tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;
+ REG(I2C_CNT) = alen;
+ REG(I2C_SA) = chip;
+ REG(I2C_CON) = tmp;
+
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ switch (alen) {
+ case 2:
+ /* Send address MSByte */
+ if (tmp & I2C_STAT_XRDY) {
+ REG(I2C_DXR) = (addr >> 8) & 0xff;
+ } else {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ CHECK_NACK();
+ /* No break, fall through */
+ case 1:
+ /* Send address LSByte */
+ if (tmp & I2C_STAT_XRDY) {
+ REG(I2C_DXR) = addr & 0xff;
+ } else {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);
+
+ CHECK_NACK();
+
+ if (!(tmp & I2C_STAT_ARDY)) {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+ }
+ }
+
+ /* Address phase is over, now read 'len' bytes and stop */
+ tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;
+ REG(I2C_CNT) = len & 0xffff;
+ REG(I2C_SA) = chip;
+ REG(I2C_CON) = tmp;
+
+ for (i = 0; i < len; i++) {
+ tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);
+
+ CHECK_NACK();
+
+ if (tmp & I2C_STAT_RRDY) {
+ buf[i] = REG(I2C_DRR);
+ } else {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+ }
+
+ tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ if (!(tmp & I2C_STAT_SCD)) {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+
+ flush_rx();
+ REG(I2C_STAT) = 0xffff;
+ REG(I2C_CNT) = 0;
+ REG(I2C_CON) = 0;
+
+ return(0);
+}
+
+
+int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len)
+{
+ u_int32_t tmp;
+ int i;
+
+ if ((alen < 0) || (alen > 2)) {
+ printf("%s(): bogus address length %x\n", __FUNCTION__, alen);
+ return(1);
+ }
+ if (len < 0) {
+ printf("%s(): bogus length %x\n", __FUNCTION__, len);
+ return(1);
+ }
+
+ if (wait_for_bus()) {return(1);}
+
+ /* Start address phase */
+ tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;
+ REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;
+ REG(I2C_SA) = chip;
+ REG(I2C_CON) = tmp;
+
+ switch (alen) {
+ case 2:
+ /* Send address MSByte */
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ if (tmp & I2C_STAT_XRDY) {
+ REG(I2C_DXR) = (addr >> 8) & 0xff;
+ } else {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+ /* No break, fall through */
+ case 1:
+ /* Send address LSByte */
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ if (tmp & I2C_STAT_XRDY) {
+ REG(I2C_DXR) = addr & 0xff;
+ } else {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+ }
+
+ for (i = 0; i < len; i++) {
+ tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ if (tmp & I2C_STAT_XRDY) {
+ REG(I2C_DXR) = buf[i];
+ } else {
+ return(1);
+ }
+ }
+
+ tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);
+
+ CHECK_NACK();
+
+ if (!(tmp & I2C_STAT_SCD)) {
+ REG(I2C_CON) = 0;
+ return(1);
+ }
+
+ flush_rx();
+ REG(I2C_STAT) = 0xffff;
+ REG(I2C_CNT) = 0;
+ REG(I2C_CON) = 0;
+
+ return(0);
+}
+
+
+u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg)
+{
+ u_int8_t tmp;
+
+ i2c_read(chip, reg, 1, &tmp, 1);
+ return(tmp);
+}
+
+
+void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val)
+{
+ u_int8_t tmp;
+
+ i2c_write(chip, reg, 1, &tmp, 1);
+}
+
+#endif /* CONFIG_DRIVER_DAVINCI_I2C */
diff --git a/cpu/arm926ejs/davinci/lowlevel_init.S b/cpu/arm926ejs/davinci/lowlevel_init.S
new file mode 100644
index 0000000..a87c112
--- /dev/null
+++ b/cpu/arm926ejs/davinci/lowlevel_init.S
@@ -0,0 +1,707 @@
+/*
+ * Low-level board setup code for TI DaVinci SoC based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Partially based on TI sources, original copyrights follow:
+ */
+
+/*
+ * Board specific setup info
+ *
+ * (C) Copyright 2003
+ * Texas Instruments, <www.ti.com>
+ * Kshitij Gupta <Kshitij@ti.com>
+ *
+ * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004
+ *
+ * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Modified for DV-EVM board by Rishi Bhattacharya, Apr 2005
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Modified for DV-EVM board by Swaminathan S, Nov 2005
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+.globl lowlevel_init
+lowlevel_init:
+
+ /*-------------------------------------------------------*
+ * Mask all IRQs by setting all bits in the EINT default *
+ *-------------------------------------------------------*/
+ mov r1, $0
+ ldr r0, =EINT_ENABLE0
+ str r1, [r0]
+ ldr r0, =EINT_ENABLE1
+ str r1, [r0]
+
+ /*------------------------------------------------------*
+ * Put the GEM in reset *
+ *------------------------------------------------------*/
+
+ /* Put the GEM in reset */
+ ldr r8, PSC_GEM_FLAG_CLEAR
+ ldr r6, MDCTL_GEM
+ ldr r7, [r6]
+ and r7, r7, r8
+ str r7, [r6]
+
+ /* Enable the Power Domain Transition Command */
+ ldr r6, PTCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x02
+ str r7, [r6]
+
+ /* Check for Transition Complete(PTSTAT) */
+checkStatClkStopGem:
+ ldr r6, PTSTAT
+ ldr r7, [r6]
+ ands r7, r7, $0x02
+ bne checkStatClkStopGem
+
+ /* Check for GEM Reset Completion */
+checkGemStatClkStop:
+ ldr r6, MDSTAT_GEM
+ ldr r7, [r6]
+ ands r7, r7, $0x100
+ bne checkGemStatClkStop
+
+ /* Do this for enabling a WDT initiated reset this is a workaround
+ for a chip bug. Not required under normal situations */
+ ldr r6, P1394
+ mov r10, $0
+ str r10, [r6]
+
+ /*------------------------------------------------------*
+ * Enable L1 & L2 Memories in Fast mode *
+ *------------------------------------------------------*/
+ ldr r6, DFT_ENABLE
+ mov r10, $0x01
+ str r10, [r6]
+
+ ldr r6, MMARG_BRF0
+ ldr r10, MMARG_BRF0_VAL
+ str r10, [r6]
+
+ ldr r6, DFT_ENABLE
+ mov r10, $0
+ str r10, [r6]
+
+ /*------------------------------------------------------*
+ * DDR2 PLL Initialization *
+ *------------------------------------------------------*/
+
+ /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
+ mov r10, $0
+ ldr r6, PLL2_CTL
+ ldr r7, PLL_CLKSRC_MASK
+ ldr r8, [r6]
+ and r8, r8, r7
+ mov r9, r10, lsl $8
+ orr r8, r8, r9
+ str r8, [r6]
+
+ /* Select the PLLEN source */
+ ldr r7, PLL_ENSRC_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Bypass the PLL */
+ ldr r7, PLL_BYPASS_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
+ mov r10, $0x20
+WaitPPL2Loop:
+ subs r10, r10, $1
+ bne WaitPPL2Loop
+
+ /* Reset the PLL */
+ ldr r7, PLL_RESET_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Power up the PLL */
+ ldr r7, PLL_PWRUP_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Enable the PLL from Disable Mode */
+ ldr r7, PLL_DISABLE_ENABLE_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Program the PLL Multiplier */
+ ldr r6, PLL2_PLLM
+ mov r2, $0x17 /* 162 MHz */
+ str r2, [r6]
+
+ /* Program the PLL2 Divisor Value */
+ ldr r6, PLL2_DIV2
+ mov r3, $0x01
+ str r3, [r6]
+
+ /* Program the PLL2 Divisor Value */
+ ldr r6, PLL2_DIV1
+ mov r4, $0x0b /* 54 MHz */
+ str r4, [r6]
+
+ /* PLL2 DIV2 MMR */
+ ldr r8, PLL2_DIV_MASK
+ ldr r6, PLL2_DIV2
+ ldr r9, [r6]
+ and r8, r8, r9
+ mov r9, $0x01
+ mov r9, r9, lsl $15
+ orr r8, r8, r9
+ str r8, [r6]
+
+ /* Program the GOSET bit to take new divider values */
+ ldr r6, PLL2_PLLCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Wait for Done */
+ ldr r6, PLL2_PLLSTAT
+doneLoop_0:
+ ldr r7, [r6]
+ ands r7, r7, $0x01
+ bne doneLoop_0
+
+ /* PLL2 DIV1 MMR */
+ ldr r8, PLL2_DIV_MASK
+ ldr r6, PLL2_DIV1
+ ldr r9, [r6]
+ and r8, r8, r9
+ mov r9, $0x01
+ mov r9, r9, lsl $15
+ orr r8, r8, r9
+ str r8, [r6]
+
+ /* Program the GOSET bit to take new divider values */
+ ldr r6, PLL2_PLLCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Wait for Done */
+ ldr r6, PLL2_PLLSTAT
+doneLoop:
+ ldr r7, [r6]
+ ands r7, r7, $0x01
+ bne doneLoop
+
+ /* Wait for PLL to Reset Properly */
+ mov r10, $0x218
+ResetPPL2Loop:
+ subs r10, r10, $1
+ bne ResetPPL2Loop
+
+ /* Bring PLL out of Reset */
+ ldr r6, PLL2_CTL
+ ldr r8, [r6]
+ orr r8, r8, $0x08
+ str r8, [r6]
+
+ /* Wait for PLL to Lock */
+ ldr r10, PLL_LOCK_COUNT
+PLL2Lock:
+ subs r10, r10, $1
+ bne PLL2Lock
+
+ /* Enable the PLL */
+ ldr r6, PLL2_CTL
+ ldr r8, [r6]
+ orr r8, r8, $0x01
+ str r8, [r6]
+
+ /*------------------------------------------------------*
+ * Issue Soft Reset to DDR Module *
+ *------------------------------------------------------*/
+
+ /* Shut down the DDR2 LPSC Module */
+ ldr r8, PSC_FLAG_CLEAR
+ ldr r6, MDCTL_DDR2
+ ldr r7, [r6]
+ and r7, r7, r8
+ orr r7, r7, $0x03
+ str r7, [r6]
+
+ /* Enable the Power Domain Transition Command */
+ ldr r6, PTCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Check for Transition Complete(PTSTAT) */
+checkStatClkStop:
+ ldr r6, PTSTAT
+ ldr r7, [r6]
+ ands r7, r7, $0x01
+ bne checkStatClkStop
+
+ /* Check for DDR2 Controller Enable Completion */
+checkDDRStatClkStop:
+ ldr r6, MDSTAT_DDR2
+ ldr r7, [r6]
+ and r7, r7, $0x1f
+ cmp r7, $0x03
+ bne checkDDRStatClkStop
+
+ /*------------------------------------------------------*
+ * Program DDR2 MMRs for 162MHz Setting *
+ *------------------------------------------------------*/
+
+ /* Program PHY Control Register */
+ ldr r6, DDRCTL
+ ldr r7, DDRCTL_VAL
+ str r7, [r6]
+
+ /* Program SDRAM Bank Config Register */
+ ldr r6, SDCFG
+ ldr r7, SDCFG_VAL
+ str r7, [r6]
+
+ /* Program SDRAM TIM-0 Config Register */
+ ldr r6, SDTIM0
+ ldr r7, SDTIM0_VAL_162MHz
+ str r7, [r6]
+
+ /* Program SDRAM TIM-1 Config Register */
+ ldr r6, SDTIM1
+ ldr r7, SDTIM1_VAL_162MHz
+ str r7, [r6]
+
+ /* Program the SDRAM Bank Config Control Register */
+ ldr r10, MASK_VAL
+ ldr r8, SDCFG
+ ldr r9, SDCFG_VAL
+ and r9, r9, r10
+ str r9, [r8]
+
+ /* Program SDRAM SDREF Config Register */
+ ldr r6, SDREF
+ ldr r7, SDREF_VAL
+ str r7, [r6]
+
+ /*------------------------------------------------------*
+ * Issue Soft Reset to DDR Module *
+ *------------------------------------------------------*/
+
+ /* Issue a Dummy DDR2 read/write */
+ ldr r8, DDR2_START_ADDR
+ ldr r7, DUMMY_VAL
+ str r7, [r8]
+ ldr r7, [r8]
+
+ /* Shut down the DDR2 LPSC Module */
+ ldr r8, PSC_FLAG_CLEAR
+ ldr r6, MDCTL_DDR2
+ ldr r7, [r6]
+ and r7, r7, r8
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Enable the Power Domain Transition Command */
+ ldr r6, PTCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Check for Transition Complete(PTSTAT) */
+checkStatClkStop2:
+ ldr r6, PTSTAT
+ ldr r7, [r6]
+ ands r7, r7, $0x01
+ bne checkStatClkStop2
+
+ /* Check for DDR2 Controller Enable Completion */
+checkDDRStatClkStop2:
+ ldr r6, MDSTAT_DDR2
+ ldr r7, [r6]
+ and r7, r7, $0x1f
+ cmp r7, $0x01
+ bne checkDDRStatClkStop2
+
+ /*------------------------------------------------------*
+ * Turn DDR2 Controller Clocks On *
+ *------------------------------------------------------*/
+
+ /* Enable the DDR2 LPSC Module */
+ ldr r6, MDCTL_DDR2
+ ldr r7, [r6]
+ orr r7, r7, $0x03
+ str r7, [r6]
+
+ /* Enable the Power Domain Transition Command */
+ ldr r6, PTCMD
+ ldr r7, [r6]
+ orr r7, r7, $0x01
+ str r7, [r6]
+
+ /* Check for Transition Complete(PTSTAT) */
+checkStatClkEn2:
+ ldr r6, PTSTAT
+ ldr r7, [r6]
+ ands r7, r7, $0x01
+ bne checkStatClkEn2
+
+ /* Check for DDR2 Controller Enable Completion */
+checkDDRStatClkEn2:
+ ldr r6, MDSTAT_DDR2
+ ldr r7, [r6]
+ and r7, r7, $0x1f
+ cmp r7, $0x03
+ bne checkDDRStatClkEn2
+
+ /* DDR Writes and Reads */
+ ldr r6, CFGTEST
+ mov r3, $0x01
+ str r3, [r6]
+
+ /*------------------------------------------------------*
+ * System PLL Initialization *
+ *------------------------------------------------------*/
+
+ /* Select the Clock Mode Depending on the Value written in the Boot Table by the run script */
+ mov r2, $0
+ ldr r6, PLL1_CTL
+ ldr r7, PLL_CLKSRC_MASK
+ ldr r8, [r6]
+ and r8, r8, r7
+ mov r9, r2, lsl $8
+ orr r8, r8, r9
+ str r8, [r6]
+
+ /* Select the PLLEN source */
+ ldr r7, PLL_ENSRC_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Bypass the PLL */
+ ldr r7, PLL_BYPASS_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Wait for few cycles to allow PLLEN Mux switch properly to bypass Clock */
+ mov r10, $0x20
+
+WaitLoop:
+ subs r10, r10, $1
+ bne WaitLoop
+
+ /* Reset the PLL */
+ ldr r7, PLL_RESET_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Disable the PLL */
+ orr r8, r8, $0x10
+ str r8, [r6]
+
+ /* Power up the PLL */
+ ldr r7, PLL_PWRUP_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Enable the PLL from Disable Mode */
+ ldr r7, PLL_DISABLE_ENABLE_MASK
+ and r8, r8, r7
+ str r8, [r6]
+
+ /* Program the PLL Multiplier */
+ ldr r6, PLL1_PLLM
+ mov r3, $0x15 /* For 594MHz */
+ str r3, [r6]
+
+ /* Wait for PLL to Reset Properly */
+ mov r10, $0xff
+
+ResetLoop:
+ subs r10, r10, $1
+ bne ResetLoop
+
+ /* Bring PLL out of Reset */
+ ldr r6, PLL1_CTL
+ orr r8, r8, $0x08
+ str r8, [r6]
+
+ /* Wait for PLL to Lock */
+ ldr r10, PLL_LOCK_COUNT
+
+PLL1Lock:
+ subs r10, r10, $1
+ bne PLL1Lock
+
+ /* Enable the PLL */
+ orr r8, r8, $0x01
+ str r8, [r6]
+
+ nop
+ nop
+ nop
+ nop
+
+ /*------------------------------------------------------*
+ * AEMIF configuration for NOR Flash (double check) *
+ *------------------------------------------------------*/
+ ldr r0, _PINMUX0
+ ldr r1, _DEV_SETTING
+ str r1, [r0]
+
+ ldr r0, WAITCFG
+ ldr r1, WAITCFG_VAL
+ ldr r2, [r0]
+ orr r2, r2, r1
+ str r2, [r0]
+
+ ldr r0, ACFG3
+ ldr r1, ACFG3_VAL
+ ldr r2, [r0]
+ and r1, r2, r1
+ str r1, [r0]
+
+ ldr r0, ACFG4
+ ldr r1, ACFG4_VAL
+ ldr r2, [r0]
+ and r1, r2, r1
+ str r1, [r0]
+
+ ldr r0, ACFG5
+ ldr r1, ACFG5_VAL
+ ldr r2, [r0]
+ and r1, r2, r1
+ str r1, [r0]
+
+ /*--------------------------------------*
+ * VTP manual Calibration *
+ *--------------------------------------*/
+ ldr r0, VTPIOCR
+ ldr r1, VTP_MMR0
+ str r1, [r0]
+
+ ldr r0, VTPIOCR
+ ldr r1, VTP_MMR1
+ str r1, [r0]
+
+ /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
+ ldr r10, VTP_LOCK_COUNT
+VTPLock:
+ subs r10, r10, $1
+ bne VTPLock
+
+ ldr r6, DFT_ENABLE
+ mov r10, $0x01
+ str r10, [r6]
+
+ ldr r6, DDRVTPR
+ ldr r7, [r6]
+ and r7, r7, $0x1f
+ and r8, r7, $0x3e0
+ orr r8, r7, r8
+ ldr r7, VTP_RECAL
+ orr r8, r7, r8
+ ldr r7, VTP_EN
+ orr r8, r7, r8
+ str r8, [r0]
+
+
+ /* Wait for 33 VTP CLK cycles. VRP operates at 27 MHz */
+ ldr r10, VTP_LOCK_COUNT
+VTP1Lock:
+ subs r10, r10, $1
+ bne VTP1Lock
+
+ ldr r1, [r0]
+ ldr r2, VTP_MASK
+ and r2, r1, r2
+ str r2, [r0]
+
+ ldr r6, DFT_ENABLE
+ mov r10, $0
+ str r10, [r6]
+
+ /*
+ * Call board-specific lowlevel init.
+ * That MUST be present and THAT returns
+ * back to arch calling code with "mov pc, lr."
+ */
+ b dv_board_init
+
+.ltorg
+
+_PINMUX0:
+ .word 0x01c40000 /* Device Configuration Registers */
+_PINMUX1:
+ .word 0x01c40004 /* Device Configuration Registers */
+
+_DEV_SETTING:
+ .word 0x00000c1f
+
+WAITCFG:
+ .word 0x01e00004
+WAITCFG_VAL:
+ .word 0
+ACFG3:
+ .word 0x01e00014
+ACFG3_VAL:
+ .word 0x3ffffffd
+ACFG4:
+ .word 0x01e00018
+ACFG4_VAL:
+ .word 0x3ffffffd
+ACFG5:
+ .word 0x01e0001c
+ACFG5_VAL:
+ .word 0x3ffffffd
+
+MDCTL_DDR2:
+ .word 0x01c41a34
+MDSTAT_DDR2:
+ .word 0x01c41834
+
+PTCMD:
+ .word 0x01c41120
+PTSTAT:
+ .word 0x01c41128
+
+EINT_ENABLE0:
+ .word 0x01c48018
+EINT_ENABLE1:
+ .word 0x01c4801c
+
+PSC_FLAG_CLEAR:
+ .word 0xffffffe0
+PSC_GEM_FLAG_CLEAR:
+ .word 0xfffffeff
+
+/* DDR2 MMR & CONFIGURATION VALUES, 162 MHZ clock */
+DDRCTL:
+ .word 0x200000e4
+DDRCTL_VAL:
+ .word 0x50006405
+SDREF:
+ .word 0x2000000c
+SDREF_VAL:
+ .word 0x000005c3
+SDCFG:
+ .word 0x20000008
+SDCFG_VAL:
+#ifdef DDR_4BANKS
+ .word 0x00178622
+#elif defined DDR_8BANKS
+ .word 0x00178632
+#else
+#error "Unknown DDR configuration!!!"
+#endif
+SDTIM0:
+ .word 0x20000010
+SDTIM0_VAL_162MHz:
+ .word 0x28923211
+SDTIM1:
+ .word 0x20000014
+SDTIM1_VAL_162MHz:
+ .word 0x0016c722
+VTPIOCR:
+ .word 0x200000f0 /* VTP IO Control register */
+DDRVTPR:
+ .word 0x01c42030 /* DDR VPTR MMR */
+VTP_MMR0:
+ .word 0x201f
+VTP_MMR1:
+ .word 0xa01f
+DFT_ENABLE:
+ .word 0x01c4004c
+VTP_LOCK_COUNT:
+ .word 0x5b0
+VTP_MASK:
+ .word 0xffffdfff
+VTP_RECAL:
+ .word 0x40000
+VTP_EN:
+ .word 0x02000
+CFGTEST:
+ .word 0x80010000
+MASK_VAL:
+ .word 0x00000fff
+
+/* GEM Power Up & LPSC Control Register */
+MDCTL_GEM:
+ .word 0x01c41a9c
+MDSTAT_GEM:
+ .word 0x01c4189c
+
+/* For WDT reset chip bug */
+P1394:
+ .word 0x01c41a20
+
+PLL_CLKSRC_MASK:
+ .word 0xfffffeff /* Mask the Clock Mode bit */
+PLL_ENSRC_MASK:
+ .word 0xffffffdf /* Select the PLLEN source */
+PLL_BYPASS_MASK:
+ .word 0xfffffffe /* Put the PLL in BYPASS */
+PLL_RESET_MASK:
+ .word 0xfffffff7 /* Put the PLL in Reset Mode */
+PLL_PWRUP_MASK:
+ .word 0xfffffffd /* PLL Power up Mask Bit */
+PLL_DISABLE_ENABLE_MASK:
+ .word 0xffffffef /* Enable the PLL from Disable */
+PLL_LOCK_COUNT:
+ .word 0x2000
+
+/* PLL1-SYSTEM PLL MMRs */
+PLL1_CTL:
+ .word 0x01c40900
+PLL1_PLLM:
+ .word 0x01c40910
+
+/* PLL2-SYSTEM PLL MMRs */
+PLL2_CTL:
+ .word 0x01c40d00
+PLL2_PLLM:
+ .word 0x01c40d10
+PLL2_DIV1:
+ .word 0x01c40d18
+PLL2_DIV2:
+ .word 0x01c40d1c
+PLL2_PLLCMD:
+ .word 0x01c40d38
+PLL2_PLLSTAT:
+ .word 0x01c40d3c
+PLL2_DIV_MASK:
+ .word 0xffff7fff
+
+MMARG_BRF0:
+ .word 0x01c42010 /* BRF margin mode 0 (R/W)*/
+MMARG_BRF0_VAL:
+ .word 0x00444400
+
+DDR2_START_ADDR:
+ .word 0x80000000
+DUMMY_VAL:
+ .word 0xa55aa55a
diff --git a/cpu/arm926ejs/davinci/lxt972.c b/cpu/arm926ejs/davinci/lxt972.c
new file mode 100644
index 0000000..6eeb6e5
--- /dev/null
+++ b/cpu/arm926ejs/davinci/lxt972.c
@@ -0,0 +1,142 @@
+/*
+ * Intel LXT971/LXT972 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <lxt971a.h>
+#include <asm/arch/emac_defs.h>
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+
+#ifdef CONFIG_CMD_NET
+
+int lxt972_is_phy_connected(int phy_addr)
+{
+ u_int16_t id1, id2;
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1))
+ return(0);
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2))
+ return(0);
+
+ if ((id1 == (0x0013)) && ((id2 & 0xfff0) == 0x78e0))
+ return(1);
+
+ return(0);
+}
+
+int lxt972_get_link_speed(int phy_addr)
+{
+ u_int16_t stat1, tmp;
+ volatile emac_regs* emac = (emac_regs *)EMAC_BASE_ADDR;
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
+ return(0);
+
+ if (!(stat1 & PHY_LXT971_STAT2_LINK)) /* link up? */
+ return(0);
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ return(0);
+
+ tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;
+
+ dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
+ /* Read back */
+ if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
+ return(0);
+
+
+ /* Speed doesn't matter, there is no setting for it in EMAC... */
+ if (stat1 & PHY_LXT971_STAT2_100BTX) {
+ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ } else {
+ if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
+ /* set DM644x EMAC for Full Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
+ } else {
+ /*set DM644x EMAC for Half Duplex */
+ emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
+ }
+
+ return(1);
+ }
+
+ return(0);
+}
+
+
+int lxt972_init_phy(int phy_addr)
+{
+ int ret = 1;
+
+ if (!lxt972_get_link_speed(phy_addr)) {
+ /* Try another time */
+ ret = lxt972_get_link_speed(phy_addr);
+ }
+
+ /* Disable PHY Interrupts */
+ dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);
+
+ return(ret);
+}
+
+
+int lxt972_auto_negotiate(int phy_addr)
+{
+ u_int16_t tmp;
+
+
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp))
+ return(0);
+
+ /* Restart Auto_negotiation */
+ tmp |= PHY_COMMON_CTRL_RES_AUTO;
+ dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp);
+
+ /*check AutoNegotiate complete */
+ udelay (10000);
+ if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp))
+ return(0);
+
+ if (!(tmp & PHY_COMMON_STAT_AN_COMP))
+ return(0);
+
+ return (lxt972_get_link_speed(phy_addr));
+}
+
+#endif /* CONFIG_CMD_NET */
+
+#endif /* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm926ejs/davinci/nand.c b/cpu/arm926ejs/davinci/nand.c
new file mode 100644
index 0000000..127be9f
--- /dev/null
+++ b/cpu/arm926ejs/davinci/nand.c
@@ -0,0 +1,389 @@
+/*
+ * NAND driver for TI DaVinci based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on Linux DaVinci NAND driver by TI. Original copyright follows:
+ */
+
+/*
+ *
+ * linux/drivers/mtd/nand/nand_davinci.c
+ *
+ * NAND Flash Driver
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * DaVinci board which utilizes the Samsung k9k2g08 part.
+ *
+ Modifications:
+ ver. 1.0: Feb 2005, Vinod/Sudhakar
+ -
+ *
+ */
+
+#include <common.h>
+
+#ifdef CFG_USE_NAND
+#if !defined(CFG_NAND_LEGACY)
+
+#include <nand.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/emif_defs.h>
+
+extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
+
+static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct nand_chip *this = mtd->priv;
+ u_int32_t IO_ADDR_W = (u_int32_t)this->IO_ADDR_W;
+
+ IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
+
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ IO_ADDR_W |= MASK_CLE;
+ break;
+ case NAND_CTL_SETALE:
+ IO_ADDR_W |= MASK_ALE;
+ break;
+ }
+
+ this->IO_ADDR_W = (void *)IO_ADDR_W;
+}
+
+/* Set WP on deselect, write enable on select */
+static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
+{
+#define GPIO_SET_DATA01 0x01c67018
+#define GPIO_CLR_DATA01 0x01c6701c
+#define GPIO_NAND_WP (1 << 4)
+#ifdef SONATA_BOARD_GPIOWP
+ if (chip < 0) {
+ REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP;
+ } else {
+ REG(GPIO_SET_DATA01) |= GPIO_NAND_WP;
+ }
+#endif
+}
+
+#ifdef CFG_NAND_HW_ECC
+#ifdef CFG_NAND_LARGEPAGE
+static struct nand_oobinfo davinci_nand_oobinfo = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 12,
+ .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
+ .oobfree = { {2, 6}, {12, 12}, {28, 12}, {44, 12}, {60, 4} }
+};
+#elif defined(CFG_NAND_SMALLPAGE)
+static struct nand_oobinfo davinci_nand_oobinfo = {
+ .useecc = MTD_NANDECC_AUTOPLACE,
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = { {6, 2}, {8, 8} }
+};
+#else
+#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#endif
+
+static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ emifregs emif_addr;
+ int dummy;
+
+ emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+
+ dummy = emif_addr->NANDF1ECC;
+ dummy = emif_addr->NANDF2ECC;
+ dummy = emif_addr->NANDF3ECC;
+ dummy = emif_addr->NANDF4ECC;
+
+ emif_addr->NANDFCR |= (1 << 8);
+}
+
+static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
+{
+ u_int32_t ecc = 0;
+ emifregs emif_base_addr;
+
+ emif_base_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+
+ if (region == 1)
+ ecc = emif_base_addr->NANDF1ECC;
+ else if (region == 2)
+ ecc = emif_base_addr->NANDF2ECC;
+ else if (region == 3)
+ ecc = emif_base_addr->NANDF3ECC;
+ else if (region == 4)
+ ecc = emif_base_addr->NANDF4ECC;
+
+ return(ecc);
+}
+
+static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ u_int32_t tmp;
+ int region, n;
+ struct nand_chip *this = mtd->priv;
+
+ n = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+
+ region = 1;
+ while (n--) {
+ tmp = nand_davinci_readecc(mtd, region);
+ *ecc_code++ = tmp;
+ *ecc_code++ = tmp >> 16;
+ *ecc_code++ = ((tmp >> 8) & 0x0f) | ((tmp >> 20) & 0xf0);
+ region++;
+ }
+ return(0);
+}
+
+static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf)
+{
+ u_int32_t tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8);
+
+ ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) | P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp));
+ ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) | P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp));
+ ecc_buf[2] = ~( P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) | P1e(tmp) | P2048o(tmp) | P2048e(tmp));
+}
+
+static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_int8_t *page_data)
+{
+ u_int32_t i;
+ u_int8_t tmp0_bit[8], tmp1_bit[8], tmp2_bit[8];
+ u_int8_t comp0_bit[8], comp1_bit[8], comp2_bit[8];
+ u_int8_t ecc_bit[24];
+ u_int8_t ecc_sum = 0;
+ u_int8_t find_bit = 0;
+ u_int32_t find_byte = 0;
+ int is_ecc_ff;
+
+ is_ecc_ff = ((*ecc_nand == 0xff) && (*(ecc_nand + 1) == 0xff) && (*(ecc_nand + 2) == 0xff));
+
+ nand_davinci_gen_true_ecc(ecc_nand);
+ nand_davinci_gen_true_ecc(ecc_calc);
+
+ for (i = 0; i <= 2; i++) {
+ *(ecc_nand + i) = ~(*(ecc_nand + i));
+ *(ecc_calc + i) = ~(*(ecc_calc + i));
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp0_bit[i] = *ecc_nand % 2;
+ *ecc_nand = *ecc_nand / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp1_bit[i] = *(ecc_nand + 1) % 2;
+ *(ecc_nand + 1) = *(ecc_nand + 1) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp2_bit[i] = *(ecc_nand + 2) % 2;
+ *(ecc_nand + 2) = *(ecc_nand + 2) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp0_bit[i] = *ecc_calc % 2;
+ *ecc_calc = *ecc_calc / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp1_bit[i] = *(ecc_calc + 1) % 2;
+ *(ecc_calc + 1) = *(ecc_calc + 1) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp2_bit[i] = *(ecc_calc + 2) % 2;
+ *(ecc_calc + 2) = *(ecc_calc + 2) / 2;
+ }
+
+ for (i = 0; i< 6; i++)
+ ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2];
+
+ for (i = 0; i < 8; i++)
+ ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i];
+
+ for (i = 0; i < 8; i++)
+ ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i];
+
+ ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0];
+ ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1];
+
+ for (i = 0; i < 24; i++)
+ ecc_sum += ecc_bit[i];
+
+ switch (ecc_sum) {
+ case 0:
+ /* Not reached because this function is not called if
+ ECC values are equal */
+ return 0;
+ case 1:
+ /* Uncorrectable error */
+ DEBUG (MTD_DEBUG_LEVEL0, "ECC UNCORRECTED_ERROR 1\n");
+ return(-1);
+ case 12:
+ /* Correctable error */
+ find_byte = (ecc_bit[23] << 8) +
+ (ecc_bit[21] << 7) +
+ (ecc_bit[19] << 6) +
+ (ecc_bit[17] << 5) +
+ (ecc_bit[15] << 4) +
+ (ecc_bit[13] << 3) +
+ (ecc_bit[11] << 2) +
+ (ecc_bit[9] << 1) +
+ ecc_bit[7];
+
+ find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
+
+ DEBUG (MTD_DEBUG_LEVEL0, "Correcting single bit ECC error at offset: %d, bit: %d\n", find_byte, find_bit);
+
+ page_data[find_byte] ^= (1 << find_bit);
+
+ return(0);
+ default:
+ if (is_ecc_ff) {
+ if (ecc_calc[0] == 0 && ecc_calc[1] == 0 && ecc_calc[2] == 0)
+ return(0);
+ }
+ DEBUG (MTD_DEBUG_LEVEL0, "UNCORRECTED_ERROR default\n");
+ return(-1);
+ }
+}
+
+static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *this;
+ int block_count = 0, i, rc;
+
+ this = mtd->priv;
+ block_count = (this->eccmode == NAND_ECC_HW12_2048) ? 4 : 1;
+ for (i = 0; i < block_count; i++) {
+ if (memcmp(read_ecc, calc_ecc, 3) != 0) {
+ rc = nand_davinci_compare_ecc(read_ecc, calc_ecc, dat);
+ if (rc < 0) {
+ return(rc);
+ }
+ }
+ read_ecc += 3;
+ calc_ecc += 3;
+ dat += 512;
+ }
+ return(0);
+}
+#endif
+
+static int nand_davinci_dev_ready(struct mtd_info *mtd)
+{
+ emifregs emif_addr;
+
+ emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+
+ return(emif_addr->NANDFSR & 0x1);
+}
+
+static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
+{
+ while(!nand_davinci_dev_ready(mtd)) {;}
+ *NAND_CE0CLE = NAND_STATUS;
+ return(*NAND_CE0DATA);
+}
+
+static void nand_flash_init(void)
+{
+ u_int32_t acfg1 = 0x3ffffffc;
+ u_int32_t acfg2 = 0x3ffffffc;
+ u_int32_t acfg3 = 0x3ffffffc;
+ u_int32_t acfg4 = 0x3ffffffc;
+ emifregs emif_regs;
+
+ /*------------------------------------------------------------------*
+ * NAND FLASH CHIP TIMEOUT @ 459 MHz *
+ * *
+ * AEMIF.CLK freq = PLL1/6 = 459/6 = 76.5 MHz *
+ * AEMIF.CLK period = 1/76.5 MHz = 13.1 ns *
+ * *
+ *------------------------------------------------------------------*/
+ acfg1 = 0
+ | (0 << 31 ) /* selectStrobe */
+ | (0 << 30 ) /* extWait */
+ | (1 << 26 ) /* writeSetup 10 ns */
+ | (3 << 20 ) /* writeStrobe 40 ns */
+ | (1 << 17 ) /* writeHold 10 ns */
+ | (1 << 13 ) /* readSetup 10 ns */
+ | (5 << 7 ) /* readStrobe 60 ns */
+ | (1 << 4 ) /* readHold 10 ns */
+ | (3 << 2 ) /* turnAround ?? ns */
+ | (0 << 0 ) /* asyncSize 8-bit bus */
+ ;
+
+ emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+
+ emif_regs->AWCCR |= 0x10000000;
+ emif_regs->AB1CR = acfg1; /* 0x08244128 */;
+ emif_regs->AB2CR = acfg2;
+ emif_regs->AB3CR = acfg3;
+ emif_regs->AB4CR = acfg4;
+ emif_regs->NANDFCR = 0x00000101;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->IO_ADDR_R = (void __iomem *)NAND_CE0DATA;
+ nand->IO_ADDR_W = (void __iomem *)NAND_CE0DATA;
+ nand->chip_delay = 0;
+ nand->select_chip = nand_davinci_select_chip;
+#ifdef CFG_NAND_USE_FLASH_BBT
+ nand->options = NAND_USE_FLASH_BBT;
+#endif
+#ifdef CFG_NAND_HW_ECC
+#ifdef CFG_NAND_LARGEPAGE
+ nand->eccmode = NAND_ECC_HW12_2048;
+#elif defined(CFG_NAND_SMALLPAGE)
+ nand->eccmode = NAND_ECC_HW3_512;
+#else
+#error "Either CFG_NAND_LARGEPAGE or CFG_NAND_SMALLPAGE must be defined!"
+#endif
+ nand->autooob = &davinci_nand_oobinfo;
+ nand->calculate_ecc = nand_davinci_calculate_ecc;
+ nand->correct_data = nand_davinci_correct_data;
+ nand->enable_hwecc = nand_davinci_enable_hwecc;
+#else
+ nand->eccmode = NAND_ECC_SOFT;
+#endif
+
+ /* Set address of hardware control function */
+ nand->hwcontrol = nand_davinci_hwcontrol;
+
+ nand->dev_ready = nand_davinci_dev_ready;
+ nand->waitfunc = nand_davinci_waitfunc;
+
+ nand_flash_init();
+
+ return(0);
+}
+
+#else
+#error "U-Boot legacy NAND support not available for DaVinci chips"
+#endif
+#endif /* CFG_USE_NAND */
diff --git a/cpu/arm926ejs/davinci/reset.S b/cpu/arm926ejs/davinci/reset.S
new file mode 100644
index 0000000..a687d44
--- /dev/null
+++ b/cpu/arm926ejs/davinci/reset.S
@@ -0,0 +1,77 @@
+/*
+ * Processor reset using WDT for TI TMS320DM644x SoC.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * -----------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+.globl reset_cpu
+reset_cpu:
+ ldr r0, WDT_TGCR
+ mov r1, $0x08
+ str r1, [r0]
+ ldr r1, [r0]
+ orr r1, r1, $0x03
+ str r1, [r0]
+ mov r1, $0
+ ldr r0, WDT_TIM12
+ str r1, [r0]
+ ldr r0, WDT_TIM34
+ str r1, [r0]
+ ldr r0, WDT_PRD12
+ str r1, [r0]
+ ldr r0, WDT_PRD34
+ str r1, [r0]
+ ldr r0, WDT_TCR
+ ldr r1, [r0]
+ orr r1, r1, $0x40
+ str r1, [r0]
+ ldr r0, WDT_WDTCR
+ ldr r1, [r0]
+ orr r1, r1, $0x4000
+ str r1, [r0]
+ ldr r1, WDTCR_VAL1
+ str r1, [r0]
+ ldr r1, WDTCR_VAL2
+ str r1, [r0]
+ nop
+ nop
+ nop
+ nop
+reset_cpu_loop:
+ b reset_cpu_loop
+
+WDT_TGCR:
+ .word 0x01c21c24
+WDT_TIM12:
+ .word 0x01c21c10
+WDT_TIM34:
+ .word 0x01c21c14
+WDT_PRD12:
+ .word 0x01c21c18
+WDT_PRD34:
+ .word 0x01c21c1c
+WDT_TCR:
+ .word 0x01c21c20
+WDT_WDTCR:
+ .word 0x01c21c28
+WDTCR_VAL1:
+ .word 0xa5c64000
+WDTCR_VAL2:
+ .word 0xda7e4000
diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c
new file mode 100644
index 0000000..c6b1dda
--- /dev/null
+++ b/cpu/arm926ejs/davinci/timer.c
@@ -0,0 +1,165 @@
+/*
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <arm926ejs.h>
+
+typedef volatile struct {
+ u_int32_t pid12;
+ u_int32_t emumgt_clksped;
+ u_int32_t gpint_en;
+ u_int32_t gpdir_dat;
+ u_int32_t tim12;
+ u_int32_t tim34;
+ u_int32_t prd12;
+ u_int32_t prd34;
+ u_int32_t tcr;
+ u_int32_t tgcr;
+ u_int32_t wdtcr;
+ u_int32_t tlgc;
+ u_int32_t tlmr;
+} davinci_timer;
+
+davinci_timer *timer = (davinci_timer *)CFG_TIMERBASE;
+
+#define TIMER_LOAD_VAL (CFG_HZ_CLOCK / CFG_HZ)
+#define READ_TIMER timer->tim34
+
+static ulong timestamp;
+static ulong lastinc;
+
+int timer_init(void)
+{
+ /* We are using timer34 in unchained 32-bit mode, full speed */
+ timer->tcr = 0x0;
+ timer->tgcr = 0x0;
+ timer->tgcr = 0x06;
+ timer->tim34 = 0x0;
+ timer->prd34 = TIMER_LOAD_VAL;
+ lastinc = 0;
+ timer->tcr = 0x80 << 16;
+ timestamp = 0;
+
+ return(0);
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+ return(get_timer_masked() - base);
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+void udelay(unsigned long usec)
+{
+ udelay_masked(usec);
+}
+
+void reset_timer_masked(void)
+{
+ lastinc = READ_TIMER;
+ timestamp = 0;
+}
+
+ulong get_timer_raw(void)
+{
+ ulong now = READ_TIMER;
+
+ if (now >= lastinc) {
+ /* normal mode */
+ timestamp += now - lastinc;
+ } else {
+ /* overflow ... */
+ timestamp += now + TIMER_LOAD_VAL - lastinc;
+ }
+ lastinc = now;
+ return timestamp;
+}
+
+ulong get_timer_masked(void)
+{
+ return(get_timer_raw() / TIMER_LOAD_VAL);
+}
+
+void udelay_masked(unsigned long usec)
+{
+ ulong tmo;
+ ulong endtime;
+ signed long diff;
+
+ tmo = CFG_HZ_CLOCK / 1000;
+ tmo *= usec;
+ tmo /= 1000;
+
+ endtime = get_timer_raw() + tmo;
+
+ do {
+ ulong now = get_timer_raw();
+ diff = endtime - now;
+ } while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return(get_timer(0));
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ ulong tbclk;
+
+ tbclk = CFG_HZ;
+ return(tbclk);
+}
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index 235adb7..312b0bf 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -28,7 +28,7 @@ LIB = $(obj)lib$(CPU).a
START = start.o
SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
- loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o
+ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c
new file mode 100644
index 0000000..ce709fc
--- /dev/null
+++ b/cpu/mpc5xxx/usb.c
@@ -0,0 +1,54 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+#include <mpc5xxx.h>
+
+int usb_cpu_init()
+{
+ /* Set the USB Clock */
+ *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
+
+ /* remove all USB bits first before ORing in ours */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
+
+ /* Activate USB port */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
+
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index bb96f77..2329970 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -29,7 +29,7 @@ LIB = $(obj)lib$(CPU).a
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o qe_io.o pci.o
+ spd_sdram.o ecc.o qe_io.o pci.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 841fe82..adf8083 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -33,8 +33,7 @@
#include <asm/processor.h>
#if defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
-#endif
-#if defined(CONFIG_OF_LIBFDT)
+#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#endif
@@ -113,12 +112,14 @@ int checkcpu(void)
case SPR_8360E_REV11:
case SPR_8360E_REV12:
case SPR_8360E_REV20:
+ case SPR_8360E_REV21:
puts("MPC8360E, ");
break;
case SPR_8360_REV10:
case SPR_8360_REV11:
case SPR_8360_REV12:
case SPR_8360_REV20:
+ case SPR_8360_REV21:
puts("MPC8360, ");
break;
case SPR_8323E_REV10:
@@ -150,7 +151,8 @@ int checkcpu(void)
puts("MPC8313E, ");
break;
default:
- puts("Rev: Unknown revision number.\nWarning: Unsupported cpu revision!\n");
+ printf("Rev: Unknown revision number:%08x\n"
+ "Warning: Unsupported cpu revision!\n",spridr);
return 0;
}
@@ -329,154 +331,167 @@ void watchdog_reset (void)
/*
* "Setter" functions used to add/modify FDT entries.
*/
-static int fdt_set_eth0(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
{
/*
* Fix it up if it exists, don't create it if it doesn't exist.
*/
- if (fdt_get_property(fdt, nodeoffset, name, 0)) {
- return fdt_setprop(fdt, nodeoffset, name, bd->bi_enetaddr, 6);
+ if (fdt_get_property(blob, nodeoffset, name, 0)) {
+ return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6);
}
- return -FDT_ERR_NOTFOUND;
+ return 0;
}
#ifdef CONFIG_HAS_ETH1
/* second onboard ethernet port */
-static int fdt_set_eth1(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
{
/*
* Fix it up if it exists, don't create it if it doesn't exist.
*/
- if (fdt_get_property(fdt, nodeoffset, name, 0)) {
- return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet1addr, 6);
+ if (fdt_get_property(blob, nodeoffset, name, 0)) {
+ return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6);
}
- return -FDT_ERR_NOTFOUND;
+ return 0;
}
#endif
#ifdef CONFIG_HAS_ETH2
/* third onboard ethernet port */
-static int fdt_set_eth2(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
{
/*
* Fix it up if it exists, don't create it if it doesn't exist.
*/
- if (fdt_get_property(fdt, nodeoffset, name, 0)) {
- return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet2addr, 6);
+ if (fdt_get_property(blob, nodeoffset, name, 0)) {
+ return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6);
}
- return -FDT_ERR_NOTFOUND;
+ return 0;
}
#endif
#ifdef CONFIG_HAS_ETH3
/* fourth onboard ethernet port */
-static int fdt_set_eth3(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
{
/*
* Fix it up if it exists, don't create it if it doesn't exist.
*/
- if (fdt_get_property(fdt, nodeoffset, name, 0)) {
- return fdt_setprop(fdt, nodeoffset, name, bd->bi_enet3addr, 6);
+ if (fdt_get_property(blob, nodeoffset, name, 0)) {
+ return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6);
}
- return -FDT_ERR_NOTFOUND;
+ return 0;
}
#endif
-static int fdt_set_busfreq(void *fdt, int nodeoffset, const char *name, bd_t *bd)
+static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
{
u32 tmp;
/*
* Create or update the property.
*/
tmp = cpu_to_be32(bd->bi_busfreq);
- return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp));
+ return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
+}
+
+static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
+{
+ u32 tmp;
+ /*
+ * Create or update the property.
+ */
+ tmp = cpu_to_be32(OF_TBCLK);
+ return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
}
+
/*
- * Fixups to the fdt. If "create" is TRUE, the node is created
- * unconditionally. If "create" is FALSE, the node is updated
- * only if it already exists.
+ * Fixups to the fdt.
*/
static const struct {
char *node;
char *prop;
- int (*set_fn)(void *fdt, int nodeoffset, const char *name, bd_t *bd);
+ int (*set_fn)(void *blob, int nodeoffset, const char *name, bd_t *bd);
} fixup_props[] = {
{ "/cpus/" OF_CPU,
- "bus-frequency",
- fdt_set_busfreq
+ "timebase-frequency",
+ fdt_set_tbfreq
},
- { "/cpus/" OF_SOC,
+ { "/cpus/" OF_CPU,
"bus-frequency",
fdt_set_busfreq
},
- { "/" OF_SOC "/serial@4500/",
+ { "/cpus/" OF_CPU,
+ "clock-frequency",
+ fdt_set_busfreq
+ },
+ { "/" OF_SOC "/serial@4500",
"clock-frequency",
fdt_set_busfreq
},
- { "/" OF_SOC "/serial@4600/",
+ { "/" OF_SOC "/serial@4600",
"clock-frequency",
fdt_set_busfreq
},
#ifdef CONFIG_TSEC1
- { "/" OF_SOC "/ethernet@24000,
+ { "/" OF_SOC "/ethernet@24000",
"mac-address",
fdt_set_eth0
},
- { "/" OF_SOC "/ethernet@24000,
+ { "/" OF_SOC "/ethernet@24000",
"local-mac-address",
fdt_set_eth0
},
#endif
#ifdef CONFIG_TSEC2
- { "/" OF_SOC "/ethernet@25000,
+ { "/" OF_SOC "/ethernet@25000",
"mac-address",
fdt_set_eth1
},
- { "/" OF_SOC "/ethernet@25000,
+ { "/" OF_SOC "/ethernet@25000",
"local-mac-address",
fdt_set_eth1
},
#endif
#ifdef CONFIG_UEC_ETH1
#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
- { "/" OF_QE "/ucc@2000/mac-address",
+ { "/" OF_QE "/ucc@2000",
"mac-address",
fdt_set_eth0
},
- { "/" OF_QE "/ucc@2000/mac-address",
+ { "/" OF_QE "/ucc@2000",
"local-mac-address",
fdt_set_eth0
},
#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
- { "/" OF_QE "/ucc@2200/mac-address",
+ { "/" OF_QE "/ucc@2200",
"mac-address",
fdt_set_eth0
},
- { "/" OF_QE "/ucc@2200/mac-address",
+ { "/" OF_QE "/ucc@2200",
"local-mac-address",
fdt_set_eth0
},
#endif
-#endif
+#endif /* CONFIG_UEC_ETH1 */
#ifdef CONFIG_UEC_ETH2
#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
- { "/" OF_QE "/ucc@3000/mac-address",
+ { "/" OF_QE "/ucc@3000",
"mac-address",
fdt_set_eth1
},
- { "/" OF_QE "/ucc@3000/mac-address",
+ { "/" OF_QE "/ucc@3000",
"local-mac-address",
fdt_set_eth1
},
#elif CFG_UEC1_UCC_NUM == 3 /* UCC4 */
- { "/" OF_QE "/ucc@3200/mac-address",
+ { "/" OF_QE "/ucc@3200",
"mac-address",
fdt_set_eth1
},
- { "/" OF_QE "/ucc@3200/mac-address",
+ { "/" OF_QE "/ucc@3200",
"local-mac-address",
fdt_set_eth1
},
#endif
-#endif
+#endif /* CONFIG_UEC_ETH2 */
};
void
@@ -487,20 +502,23 @@ ft_cpu_setup(void *blob, bd_t *bd)
int j;
for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
- nodeoffset = fdt_path_offset(fdt, fixup_props[j].node);
+ nodeoffset = fdt_find_node_by_path(blob, fixup_props[j].node);
if (nodeoffset >= 0) {
- err = (*fixup_props[j].set_fn)(blob, nodeoffset, fixup_props[j].prop, bd);
+ err = fixup_props[j].set_fn(blob, nodeoffset,
+ fixup_props[j].prop, bd);
if (err < 0)
- printf("set_fn/libfdt: %s %s returned %s\n",
+ debug("Problem setting %s = %s: %s\n",
fixup_props[j].node,
fixup_props[j].prop,
fdt_strerror(err));
+ } else {
+ debug("Couldn't find %s: %s\n",
+ fixup_props[j].node,
+ fdt_strerror(nodeoffset));
}
}
}
-#endif
-
-#if defined(CONFIG_OF_FLAT_TREE)
+#elif defined(CONFIG_OF_FLAT_TREE)
void
ft_cpu_setup(void *blob, bd_t *bd)
{
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 3ac9161..7224979 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -83,20 +83,30 @@ void cpu_init_f (volatile immap_t * im)
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
#endif
-#ifdef CONFIG_MPC834X
#ifdef CFG_SCCR_TSEC1CM
/* TSEC1 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
#endif
+
#ifdef CFG_SCCR_TSEC2CM
/* TSEC2 & I2C1 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
#endif
+
+#ifdef CFG_SCCR_TSEC1ON
+ /* TSEC1 clock switch */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC2ON
+ /* TSEC2 clock switch */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#endif
+
#ifdef CFG_SCCR_USBMPHCM
/* USB MPH clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
#endif
-#endif /* CONFIG_MPC834X */
#ifdef CFG_SCCR_PCICM
/* PCI & DMA clock mode */
@@ -247,3 +257,39 @@ int cpu_init_r (void)
#endif
return 0;
}
+
+/*
+ * Figure out the cause of the reset
+ */
+int prt_83xx_rsr(void)
+{
+ static struct {
+ ulong mask;
+ char *desc;
+ } bits[] = {
+ {
+ RSR_SWSR, "Software Soft"}, {
+ RSR_SWHR, "Software Hard"}, {
+ RSR_JSRS, "JTAG Soft"}, {
+ RSR_CSHR, "Check Stop"}, {
+ RSR_SWRS, "Software Watchdog"}, {
+ RSR_BMRS, "Bus Monitor"}, {
+ RSR_SRS, "External/Internal Soft"}, {
+ RSR_HRS, "External/Internal Hard"}
+ };
+ static int n = sizeof bits / sizeof bits[0];
+ ulong rsr = gd->reset_status;
+ int i;
+ char *sep;
+
+ puts("Reset Status:");
+
+ sep = " ";
+ for (i = 0; i < n; i++)
+ if (rsr & bits[i].mask) {
+ printf("%s%s", sep, bits[i].desc);
+ sep = ", ";
+ }
+ puts("\n\n");
+ return 0;
+}
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
new file mode 100644
index 0000000..6f13094
--- /dev/null
+++ b/cpu/mpc83xx/ecc.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on the contribution of Marian Balakowicz <m8@semihalf.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <mpc83xx.h>
+#include <command.h>
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+void ecc_print_status(void)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+
+ printf("\nECC mode: %s\n\n",
+ (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+ /* Interrupts */
+ printf("Memory Error Interrupt Enable:\n");
+ printf(" Multiple-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+ printf(" Single-Bit Error Interrupt Enable: %d\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+ printf(" Memory Select Error Interrupt Enable: %d\n\n",
+ (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+ /* Error disable */
+ printf("Memory Error Disable:\n");
+ printf(" Multiple-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+ printf(" Sinle-Bit Error Disable: %d\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+ printf(" Memory Select Error Disable: %d\n\n",
+ (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+ /* Error injection */
+ printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+ ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+ printf("Memory Data Path Error Injection Mask ECC:\n");
+ printf(" ECC Mirror Byte: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+ printf(" ECC Injection Enable: %d\n",
+ (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+ printf(" ECC Error Injection Mask: 0x%02x\n\n",
+ ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+ /* SBE counter/threshold */
+ printf("Memory Single-Bit Error Management (0..255):\n");
+ printf(" Single-Bit Error Threshold: %d\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+ printf(" Single-Bit Error Counter: %d\n\n",
+ (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+ /* Error detect */
+ printf("Memory Error Detect:\n");
+ printf(" Multiple Memory Errors: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+ printf(" Multiple-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+ printf(" Single-Bit Error: %d\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+ printf(" Memory Select Error: %d\n\n",
+ (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+ /* Capture data */
+ printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+ printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+ ddr->capture_data_hi, ddr->capture_data_lo);
+ printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+ ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+ printf("Memory Error Attributes Capture:\n");
+ printf(" Data Beat Number: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
+ ECC_CAPT_ATTR_BNUM_SHIFT);
+ printf(" Transaction Size: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
+ ECC_CAPT_ATTR_TSIZ_SHIFT);
+ printf(" Transaction Source: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
+ ECC_CAPT_ATTR_TSRC_SHIFT);
+ printf(" Transaction Type: %d\n",
+ (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
+ ECC_CAPT_ATTR_TTYP_SHIFT);
+ printf(" Error Information Valid: %d\n\n",
+ ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile ddr83xx_t *ddr = &immap->ddr;
+ volatile u32 val;
+ u64 *addr;
+ u32 count;
+ register u64 *i;
+ u32 ret[2];
+ u32 pattern[2];
+ u32 writeback[2];
+
+ /* The pattern is written into memory to generate error */
+ pattern[0] = 0xfedcba98UL;
+ pattern[1] = 0x76543210UL;
+
+ /* After injecting error, re-initialize the memory with the value */
+ writeback[0] = 0x01234567UL;
+ writeback[1] = 0x89abcdefUL;
+
+ if (argc > 4) {
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (argc == 2) {
+ if (strcmp(argv[1], "status") == 0) {
+ ecc_print_status();
+ return 0;
+ } else if (strcmp(argv[1], "captureclear") == 0) {
+ ddr->capture_address = 0;
+ ddr->capture_data_hi = 0;
+ ddr->capture_data_lo = 0;
+ ddr->capture_ecc = 0;
+ ddr->capture_attributes = 0;
+ return 0;
+ }
+ }
+ if (argc == 3) {
+ if (strcmp(argv[1], "sbecnt") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "sbethr") == 0) {
+ val = simple_strtoul(argv[2], NULL, 10);
+ if (val > 255) {
+ printf("Incorrect Counter value, "
+ "should be 0..255\n");
+ return 1;
+ }
+
+ val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+ val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+ ddr->err_sbe = val;
+ return 0;
+ } else if (strcmp(argv[1], "errdisable") == 0) {
+ val = ddr->err_disable;
+
+ if (strcmp(argv[2], "+sbe") == 0) {
+ val |= ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "+mbe") == 0) {
+ val |= ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "+mse") == 0) {
+ val |= ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "+all") == 0) {
+ val |= (ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else if (strcmp(argv[2], "-sbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_SBED;
+ } else if (strcmp(argv[2], "-mbe") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MBED;
+ } else if (strcmp(argv[2], "-mse") == 0) {
+ val &= ~ECC_ERROR_DISABLE_MSED;
+ } else if (strcmp(argv[2], "-all") == 0) {
+ val &= ~(ECC_ERROR_DISABLE_SBED |
+ ECC_ERROR_DISABLE_MBED |
+ ECC_ERROR_DISABLE_MSED);
+ } else {
+ printf("Incorrect err_disable field\n");
+ return 1;
+ }
+
+ ddr->err_disable = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "errdetectclr") == 0) {
+ val = ddr->err_detect;
+
+ if (strcmp(argv[2], "mme") == 0) {
+ val |= ECC_ERROR_DETECT_MME;
+ } else if (strcmp(argv[2], "sbe") == 0) {
+ val |= ECC_ERROR_DETECT_SBE;
+ } else if (strcmp(argv[2], "mbe") == 0) {
+ val |= ECC_ERROR_DETECT_MBE;
+ } else if (strcmp(argv[2], "mse") == 0) {
+ val |= ECC_ERROR_DETECT_MSE;
+ } else if (strcmp(argv[2], "all") == 0) {
+ val |= (ECC_ERROR_DETECT_MME |
+ ECC_ERROR_DETECT_MBE |
+ ECC_ERROR_DETECT_SBE |
+ ECC_ERROR_DETECT_MSE);
+ } else {
+ printf("Incorrect err_detect field\n");
+ return 1;
+ }
+
+ ddr->err_detect = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatahi") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_hi = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectdatalo") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+
+ ddr->data_err_inject_lo = val;
+ return 0;
+ } else if (strcmp(argv[1], "injectecc") == 0) {
+ val = simple_strtoul(argv[2], NULL, 16);
+ if (val > 0xff) {
+ printf("Incorrect ECC inject mask, "
+ "should be 0x00..0xff\n");
+ return 1;
+ }
+ val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ } else if (strcmp(argv[1], "inject") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EIEN;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EIEN;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+ return 0;
+ } else if (strcmp(argv[1], "mirror") == 0) {
+ val = ddr->ecc_err_inject;
+
+ if (strcmp(argv[2], "en") == 0)
+ val |= ECC_ERR_INJECT_EMB;
+ else if (strcmp(argv[2], "dis") == 0)
+ val &= ~ECC_ERR_INJECT_EMB;
+ else
+ printf("Incorrect command\n");
+
+ ddr->ecc_err_inject = val;
+ return 0;
+ }
+ }
+ if (argc == 4) {
+ if (strcmp(argv[1], "testdw") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ ppcDWstore((u32 *) i, pattern);
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* read data, this generates ECC error */
+ ppcDWload((u32 *) i, ret);
+ __asm__ __volatile__("sync");
+
+ /* re-initialize memory, double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ if (strcmp(argv[1], "testword") == 0) {
+ addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
+ count = simple_strtoul(argv[3], NULL, 16);
+
+ if ((u32) addr % 8) {
+ printf("Address not alligned on "
+ "double word boundary\n");
+ return 1;
+ }
+ disable_interrupts();
+
+ for (i = addr; i < addr + count; i++) {
+
+ /* enable injects */
+ ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* write memory location injecting errors */
+ *(u32 *) i = 0xfedcba98UL;
+ __asm__ __volatile__("sync");
+
+ /* sub double word write,
+ * bus will read-modify-write,
+ * generates ECC error */
+ *((u32 *) i + 1) = 0x76543210UL;
+ __asm__ __volatile__("sync");
+
+ /* disable injects */
+ ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+ __asm__ __volatile__("sync");
+ __asm__ __volatile__("isync");
+
+ /* re-initialize memory,
+ * double word write the location again,
+ * generates new ECC code this time */
+ ppcDWstore((u32 *) i, writeback);
+ __asm__ __volatile__("sync");
+ }
+ enable_interrupts();
+ return 0;
+ }
+ }
+ printf("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(ecc, 4, 0, do_ecc,
+ "ecc - support for DDR ECC features\n",
+ "status - print out status info\n"
+ "ecc captureclear - clear capture regs data\n"
+ "ecc sbecnt <val> - set Single-Bit Error counter\n"
+ "ecc sbethr <val> - set Single-Bit Threshold\n"
+ "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
+ " [-|+]sbe - Single-Bit Error\n"
+ " [-|+]mbe - Multiple-Bit Error\n"
+ " [-|+]mse - Memory Select Error\n"
+ " [-|+]all - all errors\n"
+ "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+ " mme - Multiple Memory Errors\n"
+ " sbe - Single-Bit Error\n"
+ " mbe - Multiple-Bit Error\n"
+ " mse - Memory Select Error\n"
+ " all - all errors\n"
+ "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
+ "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
+ "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
+ "ecc inject <en|dis> - enable/disable error injection\n"
+ "ecc mirror <en|dis> - enable/disable mirror byte\n"
+ "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with double word access\n"
+ " - disables injects\n"
+ " - reads pattern back with double word access, generates error\n"
+ " - re-inits memory\n"
+ "ecc testword <addr> <cnt> - test mem region with word access:\n"
+ " - enables injects\n"
+ " - writes pattern injecting errors with word access\n"
+ " - writes pattern with word access, generates error\n"
+ " - disables injects\n" " - re-inits memory");
+#endif
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
index 785d612..2298218 100644
--- a/cpu/mpc83xx/pci.c
+++ b/cpu/mpc83xx/pci.c
@@ -25,7 +25,14 @@
#include <common.h>
#include <pci.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#elif defined(CONFIG_OF_FLAT_TREE)
#include <ft_build.h>
+#endif
+
#include <asm/mpc8349_pci.h>
#ifdef CONFIG_83XX_GENERIC_PCI
@@ -163,7 +170,34 @@ void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
pci_init_bus(i, reg[i]);
}
-#ifdef CONFIG_OF_FLAT_TREE
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int err;
+ int tmp[2];
+
+ if (pci_num_buses < 1)
+ return;
+
+ nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8500");
+ if (nodeoffset >= 0) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+ }
+
+ if (pci_num_buses < 2)
+ return;
+
+ nodeoffset = fdt_find_node_by_path(blob, "/" OF_SOC "/pci@8600");
+ if (nodeoffset >= 0) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ err = fdt_setprop(blob, nodeoffset, "bus-range", tmp, sizeof(tmp));
+ }
+}
+#elif CONFIG_OF_FLAT_TREE
void ft_pci_setup(void *blob, bd_t *bd)
{
u32 *p;
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index 647813f..54f0c83 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -574,7 +574,10 @@ long int spd_sdram()
/* Check DIMM data bus width */
if (spd.dataw_lsb == 0x20) {
- burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
+ else
+ burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
printf("\n DDR DIMM: data bus width is 32 bit");
} else {
burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
@@ -730,8 +733,12 @@ long int spd_sdram()
sdram_cfg |= 0x10000000;
/* The DIMM is 32bit width */
- if (spd.dataw_lsb == 0x20)
- sdram_cfg |= 0x000C0000;
+ if (spd.dataw_lsb == 0x20) {
+ if (spd.mem_type == SPD_MEMTYPE_DDR)
+ sdram_cfg |= 0x000C0000;
+ if (spd.mem_type == SPD_MEMTYPE_DDR2)
+ sdram_cfg |= 0x00080000;
+ }
ddrc_ecc_enable = 0;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 4068b53..af9da5b 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,12 +27,12 @@ LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o kgdb.o
SOBJS = dcr.o
-COBJS = 405gp_pci.o 4xx_enet.o \
+COBJS = 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
miiphy.o ndfc.o sdram.o serial.o \
40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
- tlb.o traps.o usb_ohci.o usbdev.o \
+ tlb.o traps.o usb_ohci.o usb.o usbdev.o \
440spe_pcie.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
new file mode 100644
index 0000000..2837b37
--- /dev/null
+++ b/cpu/ppc4xx/usb.c
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+#include "usbdev.h"
+
+int usb_cpu_init()
+{
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+ usb_dev_init();
+#endif
+
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
index cded7ff..8b4367e 100644
--- a/cpu/pxa/Makefile
+++ b/cpu/pxa/Makefile
@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
+COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o usb.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
new file mode 100644
index 0000000..65f457f
--- /dev/null
+++ b/cpu/pxa/usb.c
@@ -0,0 +1,79 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
+
+#include <asm/arch/pxa-regs.h>
+
+int usb_cpu_init()
+{
+#if defined(CONFIG_CPU_MONAHANS)
+ /* Enable USB host clock. */
+ CKENA |= (CKENA_2_USBHOST | CKENA_20_UDC);
+ udelay(100);
+#endif
+#if defined(CONFIG_PXA27X)
+ /* Enable USB host clock. */
+ CKEN |= CKEN10_USBHOST;
+#endif
+
+#if defined(CONFIG_CPU_MONAHANS)
+ /* Configure Port 2 for Host (USB Client Registers) */
+ UP2OCR = 0x3000c;
+#endif
+
+ UHCHR |= UHCHR_FHR;
+ wait_ms(11);
+ UHCHR &= ~UHCHR_FHR;
+
+ UHCHR |= UHCHR_FSBIR;
+ while (UHCHR & UHCHR_FSBIR)
+ udelay(1);
+
+#if defined(CONFIG_CPU_MONAHANS)
+ UHCHR &= ~UHCHR_SSEP0;
+#endif
+#if defined(CONFIG_PXA27X)
+ UHCHR &= ~UHCHR_SSEP2;
+#endif
+ UHCHR &= ~UHCHR_SSEP1;
+ UHCHR &= ~UHCHR_SSE;
+
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ return 0;
+}
+
+# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
new file mode 100644
index 0000000..c343dfd
--- /dev/null
+++ b/doc/README.generic_usb_ohci
@@ -0,0 +1,60 @@
+Notes on the the generic USB-OHCI driver
+========================================
+
+This driver (drivers/usb_ohci.[ch]) is the result of the merge of
+various existing OHCI drivers that were basically identical beside
+cpu/board dependant initalization. This initalization has been moved
+into cpu/board directories and are called via the hooks below.
+
+Configuration options
+----------------------
+
+ CONFIG_USB_OHCI_NEW: enable the new OHCI driver
+
+ CFG_USB_OHCI_BOARD_INIT: call the board dependant hooks:
+
+ - extern int usb_board_init(void);
+ - extern int usb_board_stop(void);
+ - extern int usb_cpu_init_fail(void);
+
+ CFG_USB_OHCI_CPU_INIT: call the cpu dependant hooks:
+
+ - extern int usb_cpu_init(void);
+ - extern int usb_cpu_stop(void);
+ - extern int usb_cpu_init_fail(void);
+
+ CFG_USB_OHCI_REGS_BASE: defines the base address of the OHCI
+ registers
+
+ CFG_USB_OHCI_SLOT_NAME: slot name
+
+ CFG_USB_OHCI_MAX_ROOT_PORTS: maximal number of ports of the
+ root hub.
+
+
+Endianness issues
+------------------
+
+The USB bus operates in little endian, but unfortunately there are
+OHCI controllers that operate in big endian such as ppc4xx and
+mpc5xxx. For these the config option
+
+ CFG_OHCI_BE_CONTROLLER
+
+needs to be defined.
+
+
+PCI Controllers
+----------------
+
+You'll need to define
+
+ CONFIG_PCI_OHCI
+
+PCI Controllers need to do byte swapping on register accesses, so they
+should to define:
+
+ CFG_OHCI_SWAP_REG_ACCESS
+
+
+
diff --git a/doc/README.mpc8323erdb b/doc/README.mpc8323erdb
new file mode 100644
index 0000000..6f89829
--- /dev/null
+++ b/doc/README.mpc8323erdb
@@ -0,0 +1,71 @@
+Freescale MPC8323ERDB Board
+-----------------------------------------
+
+1. Memory Map
+ The memory map looks like this:
+
+ 0x0000_0000 0x03ff_ffff DDR 64M
+ 0x8000_0000 0x8fff_ffff PCI MEM 256M
+ 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
+ 0xe000_0000 0xe00f_ffff IMMR 1M
+ 0xd000_0000 0xd3ff_ffff PCI IO 64M
+ 0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M
+
+2. Compilation
+
+ Assuming you're using BASH (or similar) as your shell:
+
+ export CROSS_COMPILE=your-cross-compiler-prefix-
+ make distclean
+ make MPC8323ERDB_config
+ make
+
+3. Downloading and Flashing Images
+
+3.1 Reflash U-boot Image using U-boot
+
+ N.b, have an alternate means of programming
+ the flash available if the new u-boot doesn't boot.
+
+ First try a:
+
+ tftpboot $loadaddr $uboot
+
+ to make sure that the TFTP load will succeed before
+ an erase goes ahead and wipes out your current firmware.
+ Then do a:
+
+ run tftpflash
+
+ which is a shorter version of the manual sequence:
+
+ tftp $loadaddr u-boot.bin
+ protect off fe000000 +$filesize
+ erase fe000000 +$filesize
+ cp.b $loadaddr fe000000 $filesize
+
+ To keep your old u-boot's environment variables, do a:
+
+ saveenv
+
+ prior to resetting the board.
+
+3.2 Downloading and Booting Linux Kernel
+
+ Ensure that all networking-related environment variables are set
+ properly (including ipaddr, serverip, gatewayip (if needed),
+ netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+ fdtfile, and bootfile).
+
+ Then, do one of the following, depending on whether you
+ want an NFS root or a ramdisk root:
+
+ run nfsboot
+
+ or
+
+ run ramboot
+
+4 Notes
+
+ The console baudrate for MPC8323ERDB is 115200bps.
diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index c87469f..5f20247 100644
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -21,7 +21,13 @@ Freescale MPC8360EMDS Board
SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
and bits labeled 8 is set as "Off".
-1.1 For the MPC8360E PB PROTO Board
+1.1 There are three type boards for MPC8360E silicon up to now, They are
+
+ * MPC8360E-MDS-PB PROTO (a.k.a 8360SYS PROTOTYPE)
+ * MPC8360E-MDS-PB PILOT (a.k.a 8360SYS PILOT)
+ * MPC8360EA-MDS-PB PROTO (a.k.a 8360SYS2 PROTOTYPE)
+
+1.2 For all the MPC8360EMDS Board
First, make sure the board default setting is consistent with the
document shipped with your board. Then apply the following setting:
@@ -33,6 +39,21 @@ Freescale MPC8360EMDS Board
JP6 1-2
on board Oscillator: 66M
+1.3 Since different board/chip rev. combinations have AC timing issues,
+ u-boot forces RGMII-ID (RGMII with Internal Delay) mode on by default
+ by the patch (mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers).
+
+ When the rev2.x silicon mount on these boards, and if you are using
+ u-boot version after this patch, to make the ethernet interfaces usable,
+ and to enable RGMII-ID on your board, you have to setup the jumpers
+ correctly.
+
+ * MPC8360E-MDS-PB PROTO
+ nothing to do
+ * MPC8360E-MDS-PB PILOT
+ JP9 and JP8 should be ON
+ * MPC8360EA-MDS-PB PROTO
+ JP2 and JP3 should be ON
2. Memory Map
diff --git a/doc/README.mpc8349emds.ddrecc b/doc/README.mpc83xx.ddrecc
index eb249c3..0029f08 100644
--- a/doc/README.mpc8349emds.ddrecc
+++ b/doc/README.mpc83xx.ddrecc
@@ -15,10 +15,10 @@ IMPORTANT NOTICE: enabling injecting multiple-bit errors is potentially
dangerous as such errors are NOT corrected by the controller. Therefore caution
should be taken when enabling the injection of multiple-bit errors: it is only
safe when used on a carefully selected memory area and used under control of
-the 'ecc test' command (see example 'Injecting Multiple-Bit Errors' below). In
-particular, when you simply set the multiple-bit errors in inject mask and
-enable injection, U-Boot is very likely to hang quickly as the errors will be
-injected when it accesses its code, data etc.
+the 'ecc testdw' 'ecc testword' command (see example 'Injecting Multiple-Bit
+Errors' below). In particular, when you simply set the multiple-bit errors in
+inject mask and enable injection, U-Boot is very likely to hang quickly as the
+errors will be injected when it accesses its code, data etc.
Use cases for DDR 'ecc' command:
@@ -40,7 +40,7 @@ Injecting Single-Bit Errors
2. Run test over some memory region
-=> ecc test 200000 10
+=> ecc testdw 200000 10
3. Check ECC status
@@ -61,57 +61,57 @@ Memory Error Detect:
16 errors were generated, Single-Bit Error flag was not set as Single Bit Error
Counter did not reach Single-Bit Error Threshold.
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
=> md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe ................
-00200010: cafecafe cafecafe cafecafe cafecafe ................
-00200020: cafecafe cafecafe cafecafe cafecafe ................
-00200030: cafecafe cafecafe cafecafe cafecafe ................
-00200040: cafecafe cafecafe cafecafe cafecafe ................
-00200050: cafecafe cafecafe cafecafe cafecafe ................
-00200060: cafecafe cafecafe cafecafe cafecafe ................
-00200070: cafecafe cafecafe cafecafe cafecafe ................
+00200000: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
00200080: deadbeef deadbeef deadbeef deadbeef ................
00200090: deadbeef deadbeef deadbeef deadbeef ................
-
Injecting Multiple-Bit Errors
-----------------------------
1. Set more than 1 bit in Data Path Error Inject Mask
-=> ecc injectdatahi 5
+=> ecc injectdatahi 1
+=> ecc injectdatalo 1
2. Run test over some memory region
-=> ecc test 200000 10
+=> ecc testword 200000 1
3. Check ECC status
=> ecc status
...
-Memory Data Path Error Injection Mask High/Low: 00000005 00000000
+Memory Data Path Error Injection Mask High/Low: 00000001 00000001
...
Memory Error Detect:
- Multiple Memory Errors: 1
+ Multiple Memory Errors: 0
Multiple-Bit Error: 1
Single-Bit Error: 0
...
-Observe that both Multiple Memory Errors and Multiple-Bit Error flags are set.
+The Multiple Memory Errors flags not set and Multiple-Bit Error flags are set.
-4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+4. Make sure used memory region got re-initialized with 0x0123456789abcdef
=> md 200000
-00200000: cafecafe cafecafe cafecafe cafecafe ................
-00200010: cafecafe cafecafe cafecafe cafecafe ................
-00200020: cafecafe cafecafe cafecafe cafecafe ................
-00200030: cafecafe cafecafe cafecafe cafecafe ................
-00200040: cafecafe cafecafe cafecafe cafecafe ................
-00200050: cafecafe cafecafe cafecafe cafecafe ................
-00200060: cafecafe cafecafe cafecafe cafecafe ................
-00200070: cafecafe cafecafe cafecafe cafecafe ................
+00200000: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200010: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200020: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200030: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200040: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200050: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200060: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
+00200070: 01234567 89abcdef 01234567 89abcdef .#Eg.....#Eg....
00200080: deadbeef deadbeef deadbeef deadbeef ................
00200090: deadbeef deadbeef deadbeef deadbeef ................
@@ -140,7 +140,7 @@ Test Single-Bit Error Counter and Threshold
...
Memory Single-Bit Error Management (0..255):
Single-Bit Error Threshold: 255
- Single Bit Error Counter: 60
+ Single Bit Error Counter: 199
Memory Error Detect:
Multiple Memory Errors: 1
diff --git a/drivers/Makefile b/drivers/Makefile
index 881153a..fc98040 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -31,7 +31,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o enc28j60.o \
- i8042.o inca-ip_sw.o keyboard.o \
+ i8042.o inca-ip_sw.o isp116x-hcd.o keyboard.o \
lan91c96.o macb.o \
natsemi.o ne2000.o netarm_eth.o netconsole.o \
ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
@@ -47,7 +47,9 @@ COBJS = 3c589.o 5701rls.o ali512x.o ata_piix.o atmel_usart.o \
status_led.o sym53c8xx.o systemace.o ahci.o \
ti_pci1410a.o tigon3.o tsec.o \
tsi108_eth.o tsi108_i2c.o tsi108_pci.o \
- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
+ usb_ohci.o \
+ usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
+ usbtty.o \
videomodes.o w83c553f.o \
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
diff --git a/drivers/bios_emulator/Makefile b/drivers/bios_emulator/Makefile
index ba7d436..586e83b 100644
--- a/drivers/bios_emulator/Makefile
+++ b/drivers/bios_emulator/Makefile
@@ -1,6 +1,6 @@
include $(TOPDIR)/config.mk
-LIB := libatibiosemu.a
+LIB := $(obj)libatibiosemu.a
X86DIR = ./x86emu
diff --git a/drivers/fsl_i2c.c b/drivers/fsl_i2c.c
index ebae5af..22485ea 100644
--- a/drivers/fsl_i2c.c
+++ b/drivers/fsl_i2c.c
@@ -69,9 +69,10 @@ i2c_init(int speed, int slaveadd)
dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C2_OFFSET);
writeb(0, &dev->cr); /* stop I2C controller */
+ udelay(5); /* let it shutdown in peace */
writeb(0x3F, &dev->fdr); /* set bus speed */
writeb(0x3F, &dev->dfsrr); /* set default filter */
- writeb(slaveadd, &dev->adr); /* write slave address */
+ writeb(slaveadd << 1, &dev->adr); /* write slave address */
writeb(0x0, &dev->sr); /* clear status register */
writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */
#endif /* CFG_I2C2_OFFSET */
diff --git a/drivers/isp116x-hcd.c b/drivers/isp116x-hcd.c
new file mode 100644
index 0000000..8e2bc7a
--- /dev/null
+++ b/drivers/isp116x-hcd.c
@@ -0,0 +1,1413 @@
+/*
+ * ISP116x HCD (Host Controller Driver) for u-boot.
+ *
+ * Copyright (C) 2006-2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2006-2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Derived in part from the SL811 HCD driver "u-boot/drivers/sl811_usb.c"
+ * (original copyright message follows):
+ *
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This code is based on linux driver for sl811hs chip, source at
+ * drivers/usb/host/sl811.c:
+ *
+ * SL811 Host Controller Interface driver for USB.
+ *
+ * Copyright (c) 2003/06, Courage Co., Ltd.
+ *
+ * Based on:
+ * 1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
+ * Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
+ * Adam Richter, Gregory P. Smith;
+ * 2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
+ * 3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * and in part from AU1x00 OHCI HCD driver "u-boot/cpu/mips/au1x00_usb_ohci.c"
+ * (original copyright message follows):
+ *
+ * URB OHCI HCD (Host Controller Driver) for USB on the AU1x00.
+ *
+ * (C) Copyright 2003
+ * Gary Jennejohn, DENX Software Engineering <gj@denx.de>
+ *
+ * [[GNU/GPL disclaimer]]
+ *
+ * Note: Part of this code has been derived from linux
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_USB_ISP116X_HCD
+#include <asm/io.h>
+#include <usb.h>
+#include <malloc.h>
+#include <linux/list.h>
+
+/*
+ * ISP116x chips require certain delays between accesses to its
+ * registers. The following timing options exist.
+ *
+ * 1. Configure your memory controller (the best)
+ * 2. Use ndelay (easiest, poorest). For that, enable the following macro.
+ *
+ * Value is in microseconds.
+ */
+#ifdef ISP116X_HCD_USE_UDELAY
+#define UDELAY 1
+#endif
+
+/*
+ * On some (slowly?) machines an extra delay after data packing into
+ * controller's FIFOs is required, * otherwise you may get the following
+ * error:
+ *
+ * uboot> usb start
+ * (Re)start USB...
+ * USB: scanning bus for devices... isp116x: isp116x_submit_job: CTL:TIMEOUT
+ * isp116x: isp116x_submit_job: ****** FIFO not ready! ******
+ *
+ * USB device not responding, giving up (status=4)
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * isp116x: isp116x_submit_job: ****** FIFO not empty! ******
+ * 3 USB Device(s) found
+ * scanning bus for storage devices... 0 Storage Device(s) found
+ *
+ * Value is in milliseconds.
+ */
+#ifdef ISP116X_HCD_USE_EXTRA_DELAY
+#define EXTRA_DELAY 2
+#endif
+
+/*
+ * Enable the following defines if you wish enable debugging messages.
+ */
+#undef DEBUG /* enable debugging messages */
+#undef TRACE /* enable tracing code */
+#undef VERBOSE /* verbose debugging messages */
+
+#include "isp116x.h"
+
+#define DRIVER_VERSION "08 Jan 2007"
+static const char hcd_name[] = "isp116x-hcd";
+
+struct isp116x isp116x_dev;
+struct isp116x_platform_data isp116x_board;
+int got_rhsc = 0; /* root hub status change */
+struct usb_device *devgone; /* device which was disconnected */
+int rh_devnum = 0; /* address of Root Hub endpoint */
+
+/* ------------------------------------------------------------------------- */
+
+#define ALIGN(x,a) (((x)+(a)-1UL)&~((a)-1UL))
+#define min_t(type,x,y) \
+ ({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
+
+/* ------------------------------------------------------------------------- */
+
+static int isp116x_reset(struct isp116x *isp116x);
+
+/* --- Debugging functions ------------------------------------------------- */
+
+#define isp116x_show_reg(d, r) { \
+ if ((r) < 0x20) { \
+ DBG("%-12s[%02x]: %08x", #r, \
+ r, isp116x_read_reg32(d, r)); \
+ } else { \
+ DBG("%-12s[%02x]: %04x", #r, \
+ r, isp116x_read_reg16(d, r)); \
+ } \
+}
+
+#define isp116x_show_regs(d) { \
+ isp116x_show_reg(d, HCREVISION); \
+ isp116x_show_reg(d, HCCONTROL); \
+ isp116x_show_reg(d, HCCMDSTAT); \
+ isp116x_show_reg(d, HCINTSTAT); \
+ isp116x_show_reg(d, HCINTENB); \
+ isp116x_show_reg(d, HCFMINTVL); \
+ isp116x_show_reg(d, HCFMREM); \
+ isp116x_show_reg(d, HCFMNUM); \
+ isp116x_show_reg(d, HCLSTHRESH); \
+ isp116x_show_reg(d, HCRHDESCA); \
+ isp116x_show_reg(d, HCRHDESCB); \
+ isp116x_show_reg(d, HCRHSTATUS); \
+ isp116x_show_reg(d, HCRHPORT1); \
+ isp116x_show_reg(d, HCRHPORT2); \
+ isp116x_show_reg(d, HCHWCFG); \
+ isp116x_show_reg(d, HCDMACFG); \
+ isp116x_show_reg(d, HCXFERCTR); \
+ isp116x_show_reg(d, HCuPINT); \
+ isp116x_show_reg(d, HCuPINTENB); \
+ isp116x_show_reg(d, HCCHIPID); \
+ isp116x_show_reg(d, HCSCRATCH); \
+ isp116x_show_reg(d, HCITLBUFLEN); \
+ isp116x_show_reg(d, HCATLBUFLEN); \
+ isp116x_show_reg(d, HCBUFSTAT); \
+ isp116x_show_reg(d, HCRDITL0LEN); \
+ isp116x_show_reg(d, HCRDITL1LEN); \
+}
+
+#if defined(TRACE)
+
+static int isp116x_get_current_frame_number(struct usb_device *usb_dev)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ return isp116x_read_reg32(isp116x, HCFMNUM);
+}
+
+static void dump_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, char *str)
+{
+#if defined(VERBOSE)
+ int i;
+#endif
+
+ DBG("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d stat:%#lx",
+ str,
+ isp116x_get_current_frame_number(dev),
+ usb_pipedevice(pipe),
+ usb_pipeendpoint(pipe),
+ usb_pipeout(pipe) ? 'O' : 'I',
+ usb_pipetype(pipe) < 2 ?
+ (usb_pipeint(pipe) ?
+ "INTR" : "ISOC") :
+ (usb_pipecontrol(pipe) ? "CTRL" : "BULK"), len, dev->status);
+#if defined(VERBOSE)
+ if (len > 0 && buffer) {
+ printf(__FILE__ ": data(%d):", len);
+ for (i = 0; i < 16 && i < len; i++)
+ printf(" %02x", ((__u8 *) buffer)[i]);
+ printf("%s\n", i < len ? "..." : "");
+ }
+#endif
+}
+
+#define PTD_DIR_STR(ptd) ({char __c; \
+ switch(PTD_GET_DIR(ptd)){ \
+ case 0: __c = 's'; break; \
+ case 1: __c = 'o'; break; \
+ default: __c = 'i'; break; \
+ }; __c;})
+
+/*
+ Dump PTD info. The code documents the format
+ perfectly, right :)
+*/
+static inline void dump_ptd(struct ptd *ptd)
+{
+#if defined(VERBOSE)
+ int k;
+#endif
+
+ DBG("PTD(ext) : cc:%x %d%c%d %d,%d,%d t:%x %x%x%x",
+ PTD_GET_CC(ptd),
+ PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd),
+ PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd),
+ PTD_GET_TOGGLE(ptd),
+ PTD_GET_ACTIVE(ptd), PTD_GET_SPD(ptd), PTD_GET_LAST(ptd));
+#if defined(VERBOSE)
+ printf("isp116x: %s: PTD(byte): ", __FUNCTION__);
+ for (k = 0; k < sizeof(struct ptd); ++k)
+ printf("%02x ", ((u8 *) ptd)[k]);
+ printf("\n");
+#endif
+}
+
+static inline void dump_ptd_data(struct ptd *ptd, u8 * buf, int type)
+{
+#if defined(VERBOSE)
+ int k;
+
+ if (type == 0 /* 0ut data */ ) {
+ printf("isp116x: %s: out data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_LEN(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+ if (type == 1 /* 1n data */ ) {
+ printf("isp116x: %s: in data: ", __FUNCTION__);
+ for (k = 0; k < PTD_GET_COUNT(ptd); ++k)
+ printf("%02x ", ((u8 *) buf)[k]);
+ printf("\n");
+ }
+
+ if (PTD_GET_LAST(ptd))
+ DBG("--- last PTD ---");
+#endif
+}
+
+#else
+
+#define dump_msg(dev, pipe, buffer, len, str) do { } while (0)
+#define dump_pkt(dev, pipe, buffer, len, setup, str, small) do {} while (0)
+
+#define dump_ptd(ptd) do {} while (0)
+#define dump_ptd_data(ptd, buf, type) do {} while (0)
+
+#endif
+
+/* --- Virtual Root Hub ---------------------------------------------------- */
+
+/* Device descriptor */
+static __u8 root_hub_dev_des[] = {
+ 0x12, /* __u8 bLength; */
+ 0x01, /* __u8 bDescriptorType; Device */
+ 0x10, /* __u16 bcdUSB; v1.1 */
+ 0x01,
+ 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 bDeviceSubClass; */
+ 0x00, /* __u8 bDeviceProtocol; */
+ 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
+ 0x00, /* __u16 idVendor; */
+ 0x00,
+ 0x00, /* __u16 idProduct; */
+ 0x00,
+ 0x00, /* __u16 bcdDevice; */
+ 0x00,
+ 0x00, /* __u8 iManufacturer; */
+ 0x01, /* __u8 iProduct; */
+ 0x00, /* __u8 iSerialNumber; */
+ 0x01 /* __u8 bNumConfigurations; */
+};
+
+/* Configuration descriptor */
+static __u8 root_hub_config_des[] = {
+ 0x09, /* __u8 bLength; */
+ 0x02, /* __u8 bDescriptorType; Configuration */
+ 0x19, /* __u16 wTotalLength; */
+ 0x00,
+ 0x01, /* __u8 bNumInterfaces; */
+ 0x01, /* __u8 bConfigurationValue; */
+ 0x00, /* __u8 iConfiguration; */
+ 0x40, /* __u8 bmAttributes;
+ Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
+ 0x00, /* __u8 MaxPower; */
+
+ /* interface */
+ 0x09, /* __u8 if_bLength; */
+ 0x04, /* __u8 if_bDescriptorType; Interface */
+ 0x00, /* __u8 if_bInterfaceNumber; */
+ 0x00, /* __u8 if_bAlternateSetting; */
+ 0x01, /* __u8 if_bNumEndpoints; */
+ 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
+ 0x00, /* __u8 if_bInterfaceSubClass; */
+ 0x00, /* __u8 if_bInterfaceProtocol; */
+ 0x00, /* __u8 if_iInterface; */
+
+ /* endpoint */
+ 0x07, /* __u8 ep_bLength; */
+ 0x05, /* __u8 ep_bDescriptorType; Endpoint */
+ 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
+ 0x03, /* __u8 ep_bmAttributes; Interrupt */
+ 0x00, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
+ 0x02,
+ 0xff /* __u8 ep_bInterval; 255 ms */
+};
+
+static unsigned char root_hub_str_index0[] = {
+ 0x04, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 0x09, /* __u8 lang ID */
+ 0x04, /* __u8 lang ID */
+};
+
+static unsigned char root_hub_str_index1[] = {
+ 0x22, /* __u8 bLength; */
+ 0x03, /* __u8 bDescriptorType; String-descriptor */
+ 'I', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'S', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'P', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '1', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ '6', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'x', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'R', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'o', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 't', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ ' ', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'H', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'u', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+ 'b', /* __u8 Unicode */
+ 0, /* __u8 Unicode */
+};
+
+/*
+ * Hub class-specific descriptor is constructed dynamically
+ */
+
+/* --- Virtual root hub management functions ------------------------------- */
+
+static int rh_check_port_status(struct isp116x *isp116x)
+{
+ u32 temp, ndp, i;
+ int res;
+
+ res = -1;
+ temp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+ ndp = (temp & RH_A_NDP);
+ for (i = 0; i < ndp; i++) {
+ temp = isp116x_read_reg32(isp116x, HCRHPORT1 + i);
+ /* check for a device disconnect */
+ if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
+ (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
+ res = i;
+ break;
+ }
+ }
+ return res;
+}
+
+/* --- HC management functions --------------------------------------------- */
+
+/* Write len bytes to fifo, pad till 32-bit boundary
+ */
+static void write_ptddata_to_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = *dp++;
+ w |= *dp++ << 8;
+ isp116x_raw_write_data16(isp116x, w);
+ }
+ if (len)
+ isp116x_write_data16(isp116x, (u16) * dp);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ isp116x_raw_write_data16(isp116x, *dp2++);
+ if (len)
+ isp116x_write_data16(isp116x, 0xff & *((u8 *) dp2));
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_write_data16(isp116x, 0);
+}
+
+/* Read len bytes from fifo and then read till 32-bit boundary
+ */
+static void read_ptddata_from_fifo(struct isp116x *isp116x, void *buf, int len)
+{
+ u8 *dp = (u8 *) buf;
+ u16 *dp2 = (u16 *) buf;
+ u16 w;
+ int quot = len % 4;
+
+ if ((unsigned long)dp2 & 1) {
+ /* not aligned */
+ for (; len > 1; len -= 2) {
+ w = isp116x_raw_read_data16(isp116x);
+ *dp++ = w & 0xff;
+ *dp++ = (w >> 8) & 0xff;
+ }
+ if (len)
+ *dp = 0xff & isp116x_read_data16(isp116x);
+ } else {
+ /* aligned */
+ for (; len > 1; len -= 2)
+ *dp2++ = isp116x_raw_read_data16(isp116x);
+ if (len)
+ *(u8 *) dp2 = 0xff & isp116x_read_data16(isp116x);
+ }
+ if (quot == 1 || quot == 2)
+ isp116x_raw_read_data16(isp116x);
+}
+
+/* Write PTD's and data for scheduled transfers into the fifo ram.
+ * Fifo must be empty and ready */
+static void pack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done;
+
+ DBG("--- pack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT | ISP116x_WRITE_OFFSET);
+
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ dump_ptd(&ptd[i]);
+ isp116x_write_data16(isp116x, ptd[i].count);
+ isp116x_write_data16(isp116x, ptd[i].mps);
+ isp116x_write_data16(isp116x, ptd[i].len);
+ isp116x_write_data16(isp116x, ptd[i].faddr);
+
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 0);
+ write_ptddata_to_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+
+ done += PTD_GET_LEN(&ptd[i]);
+ }
+}
+
+/* Read the processed PTD's and data from fifo ram back to URBs' buffers.
+ * Fifo must be full and done */
+static int unpack_fifo(struct isp116x *isp116x, struct usb_device *dev,
+ unsigned long pipe, struct ptd *ptd, int n, void *data,
+ int len)
+{
+ int buflen = n * sizeof(struct ptd) + len;
+ int i, done, cc, ret;
+
+ isp116x_write_reg16(isp116x, HCuPINT, HCuPINT_AIIEOT);
+ isp116x_write_reg16(isp116x, HCXFERCTR, buflen);
+ isp116x_write_addr(isp116x, HCATLPORT);
+
+ ret = TD_CC_NOERROR;
+ done = 0;
+ for (i = 0; i < n; i++) {
+ DBG("i=%d - done=%d - len=%d", i, done, PTD_GET_LEN(&ptd[i]));
+
+ ptd[i].count = isp116x_read_data16(isp116x);
+ ptd[i].mps = isp116x_read_data16(isp116x);
+ ptd[i].len = isp116x_read_data16(isp116x);
+ ptd[i].faddr = isp116x_read_data16(isp116x);
+ dump_ptd(&ptd[i]);
+
+ read_ptddata_from_fifo(isp116x,
+ (__u8 *) data + done,
+ PTD_GET_LEN(&ptd[i]));
+ dump_ptd_data(&ptd[i], (__u8 *) data + done, 1);
+
+ done += PTD_GET_LEN(&ptd[i]);
+
+ cc = PTD_GET_CC(&ptd[i]);
+ if (cc == TD_DATAUNDERRUN) { /* underrun is no error... */
+ DBG("allowed data underrun");
+ cc = TD_CC_NOERROR;
+ }
+ if (cc != TD_CC_NOERROR && ret == TD_CC_NOERROR)
+ ret = cc;
+ }
+
+ DBG("--- unpack buffer %p - %d bytes (fifo %d) ---", data, len, buflen);
+
+ return ret;
+}
+
+/* Interrupt handling
+ */
+static int isp116x_interrupt(struct isp116x *isp116x)
+{
+ u16 irqstat;
+ u32 intstat;
+ int ret = 0;
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+ irqstat = isp116x_read_reg16(isp116x, HCuPINT);
+ isp116x_write_reg16(isp116x, HCuPINT, irqstat);
+ DBG(">>>>>> irqstat %x <<<<<<", irqstat);
+
+ if (irqstat & HCuPINT_ATL) {
+ DBG(">>>>>> HCuPINT_ATL <<<<<<");
+ udelay(500);
+ ret = 1;
+ }
+
+ if (irqstat & HCuPINT_OPR) {
+ intstat = isp116x_read_reg32(isp116x, HCINTSTAT);
+ isp116x_write_reg32(isp116x, HCINTSTAT, intstat);
+ DBG(">>>>>> HCuPINT_OPR %x <<<<<<", intstat);
+
+ if (intstat & HCINT_UE) {
+ ERR("unrecoverable error, controller disabled");
+
+ /* FIXME: be optimistic, hope that bug won't repeat
+ * often. Make some non-interrupt context restart the
+ * controller. Count and limit the retries though;
+ * either hardware or software errors can go forever...
+ */
+ isp116x_reset(isp116x);
+ ret = -1;
+ return -1;
+ }
+
+ if (intstat & HCINT_RHSC) {
+ got_rhsc = 1;
+ ret = 1;
+ /* When root hub or any of its ports is going
+ to come out of suspend, it may take more
+ than 10ms for status bits to stabilize. */
+ wait_ms(20);
+ }
+
+ if (intstat & HCINT_SO) {
+ ERR("schedule overrun");
+ ret = -1;
+ }
+
+ irqstat &= ~HCuPINT_OPR;
+ }
+
+ return ret;
+}
+
+#define PTD_NUM 64 /* it should be enougth... */
+struct ptd ptd[PTD_NUM];
+static inline int max_transfer_len(struct usb_device *dev, unsigned long pipe)
+{
+ return min(PTD_NUM * usb_maxpacket(dev, pipe), PTD_NUM * 16);
+}
+
+/* Do an USB transfer
+ */
+static int isp116x_submit_job(struct usb_device *dev, unsigned long pipe,
+ int dir, void *buffer, int len)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ int type = usb_pipetype(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ int dir_out = usb_pipeout(pipe);
+ int speed_low = usb_pipeslow(pipe);
+ int i, done, stat, timeout, cc;
+ int retries = 10;
+
+ DBG("------------------------------------------------");
+ dump_msg(dev, pipe, buffer, len, "SUBMIT");
+ DBG("------------------------------------------------");
+
+ if (isp116x->disabled) {
+ ERR("EPIPE");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* device pulled? Shortcut the action. */
+ if (devgone == dev) {
+ ERR("ENODEV");
+ dev->status = USB_ST_CRC_ERR;
+ return USB_ST_CRC_ERR;
+ }
+
+ if (!max) {
+ ERR("pipesize for pipe %lx is zero", pipe);
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ if (type == PIPE_ISOCHRONOUS) {
+ ERR("isochronous transfers not supported");
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
+ /* FIFO not empty? */
+ if (isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_FULL) {
+ ERR("****** FIFO not empty! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ retry:
+ isp116x_write_reg32(isp116x, HCINTSTAT, 0xff);
+
+ /* Prepare the PTD data */
+ done = 0;
+ i = 0;
+ do {
+ ptd[i].count = PTD_CC_MSK | PTD_ACTIVE_MSK |
+ PTD_TOGGLE(usb_gettoggle(dev, epnum, dir_out));
+ ptd[i].mps = PTD_MPS(max) | PTD_SPD(speed_low) | PTD_EP(epnum);
+ ptd[i].len = PTD_LEN(max > len - done ? len - done : max) |
+ PTD_DIR(dir);
+ ptd[i].faddr = PTD_FA(usb_pipedevice(pipe));
+
+ usb_dotoggle(dev, epnum, dir_out);
+ done += PTD_GET_LEN(&ptd[i]);
+ i++;
+ if (i >= PTD_NUM) {
+ ERR("****** Cannot pack buffer! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+ } while (done < len);
+ ptd[i - 1].mps |= PTD_LAST_MSK;
+
+ /* Pack data into FIFO ram */
+ pack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+#ifdef EXTRA_DELAY
+ wait_ms(EXTRA_DELAY);
+#endif
+
+ /* Start the data transfer */
+
+ /* Allow more time for a BULK device to react - some are slow */
+ if (usb_pipetype(pipe) == PIPE_BULK)
+ timeout = 5000;
+ else
+ timeout = 100;
+
+ /* Wait for it to complete */
+ for (;;) {
+ /* Check whether the controller is done */
+ stat = isp116x_interrupt(isp116x);
+
+ if (stat < 0) {
+ dev->status = USB_ST_CRC_ERR;
+ break;
+ }
+ if (stat > 0)
+ break;
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ ERR("CTL:TIMEOUT ");
+ stat = USB_ST_CRC_ERR;
+ break;
+ }
+ }
+
+ /* We got an Root Hub Status Change interrupt */
+ if (got_rhsc) {
+ isp116x_show_regs(isp116x);
+
+ got_rhsc = 0;
+
+ /* Abuse timeout */
+ timeout = rh_check_port_status(isp116x);
+ if (timeout >= 0) {
+ /*
+ * FIXME! NOTE! AAAARGH!
+ * This is potentially dangerous because it assumes
+ * that only one device is ever plugged in!
+ */
+ devgone = dev;
+ }
+ }
+
+ /* Ok, now we can read transfer status */
+
+ /* FIFO not ready? */
+ if (!(isp116x_read_reg16(isp116x, HCBUFSTAT) & HCBUFSTAT_ATL_DONE)) {
+ ERR("****** FIFO not ready! ******");
+ dev->status = USB_ST_BUF_ERR;
+ return -1;
+ }
+
+ /* Unpack data from FIFO ram */
+ cc = unpack_fifo(isp116x, dev, pipe, ptd, i, buffer, len);
+
+ /* Mmm... sometime we get 0x0f as cc which is a non sense!
+ * Just retry the transfer...
+ */
+ if (cc == 0x0f && retries-- > 0) {
+ usb_dotoggle(dev, epnum, dir_out);
+ goto retry;
+ }
+
+ if (cc != TD_CC_NOERROR) {
+ DBG("****** completition code error %x ******", cc);
+ switch (cc) {
+ case TD_CC_BITSTUFFING:
+ dev->status = USB_ST_BIT_ERR;
+ break;
+ case TD_CC_STALL:
+ dev->status = USB_ST_STALLED;
+ break;
+ case TD_BUFFEROVERRUN:
+ case TD_BUFFERUNDERRUN:
+ dev->status = USB_ST_BUF_ERR;
+ break;
+ default:
+ dev->status = USB_ST_CRC_ERR;
+ }
+ return -cc;
+ }
+
+ dump_msg(dev, pipe, buffer, len, "SUBMIT(ret)");
+
+ dev->status = 0;
+ return done;
+}
+
+/* Adapted from au1x00_usb_ohci.c
+ */
+static int isp116x_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *cmd)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+ u32 tmp = 0;
+
+ int leni = transfer_len;
+ int len = 0;
+ int stat = 0;
+ u32 datab[4];
+ u8 *data_buf = (u8 *) datab;
+ u16 bmRType_bReq;
+ u16 wValue;
+ u16 wIndex;
+ u16 wLength;
+
+ if ((pipe & PIPE_INTERRUPT) == PIPE_INTERRUPT) {
+ INFO("Root-Hub submit IRQ: NOT implemented");
+ return 0;
+ }
+
+ bmRType_bReq = cmd->requesttype | (cmd->request << 8);
+ wValue = swap_16(cmd->value);
+ wIndex = swap_16(cmd->index);
+ wLength = swap_16(cmd->length);
+
+ DBG("--- HUB ----------------------------------------");
+ DBG("submit rh urb, req=%x val=%#x index=%#x len=%d",
+ bmRType_bReq, wValue, wIndex, wLength);
+ dump_msg(dev, pipe, buffer, transfer_len, "RH");
+ DBG("------------------------------------------------");
+
+ switch (bmRType_bReq) {
+ case RH_GET_STATUS:
+ DBG("RH_GET_STATUS");
+
+ *(__u16 *) data_buf = swap_16(1);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_INTERFACE:
+ DBG("RH_GET_STATUS | RH_INTERFACE");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_ENDPOINT:
+ DBG("RH_GET_STATUS | RH_ENDPOINT");
+
+ *(__u16 *) data_buf = swap_16(0);
+ len = 2;
+ break;
+
+ case RH_GET_STATUS | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ *(__u32 *) data_buf = swap_32(tmp & ~(RH_HS_CRWE | RH_HS_DRWE));
+ len = 4;
+ break;
+
+ case RH_GET_STATUS | RH_OTHER | RH_CLASS:
+ DBG("RH_GET_STATUS | RH_OTHER | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHPORT1 + wIndex - 1);
+ *(__u32 *) data_buf = swap_32(tmp);
+ isp116x_show_regs(isp116x);
+ len = 4;
+ break;
+
+ case RH_CLEAR_FEATURE | RH_ENDPOINT:
+ DBG("RH_CLEAR_FEATURE | RH_ENDPOINT");
+
+ switch (wValue) {
+ case RH_ENDPOINT_STALL:
+ DBG("C_HUB_ENDPOINT_STALL");
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_CLASS");
+
+ switch (wValue) {
+ case RH_C_HUB_LOCAL_POWER:
+ DBG("C_HUB_LOCAL_POWER");
+ len = 0;
+ break;
+
+ case RH_C_HUB_OVER_CURRENT:
+ DBG("C_HUB_OVER_CURRENT");
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_OCIC);
+ len = 0;
+ break;
+ }
+ break;
+
+ case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CCS);
+ len = 0;
+ break;
+
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_LSDA);
+ len = 0;
+ break;
+
+ case RH_C_PORT_CONNECTION:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_CSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PESC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSSC);
+ len = 0;
+ break;
+
+ case RH_C_PORT_OVER_CURRENT:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_POCI);
+ len = 0;
+ break;
+
+ case RH_C_PORT_RESET:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
+ DBG("RH_SET_FEATURE | RH_OTHER | RH_CLASS");
+
+ switch (wValue) {
+ case RH_PORT_SUSPEND:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PSS);
+ len = 0;
+ break;
+
+ case RH_PORT_RESET:
+ /* Spin until any current reset finishes */
+ while (1) {
+ tmp =
+ isp116x_read_reg32(isp116x,
+ HCRHPORT1 + wIndex - 1);
+ if (!(tmp & RH_PS_PRS))
+ break;
+ wait_ms(1);
+ }
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PRS);
+ wait_ms(10);
+
+ len = 0;
+ break;
+
+ case RH_PORT_POWER:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PPS);
+ len = 0;
+ break;
+
+ case RH_PORT_ENABLE:
+ isp116x_write_reg32(isp116x, HCRHPORT1 + wIndex - 1,
+ RH_PS_PES);
+ len = 0;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ isp116x_show_regs(isp116x);
+
+ break;
+
+ case RH_SET_ADDRESS:
+ DBG("RH_SET_ADDRESS");
+
+ rh_devnum = wValue;
+ len = 0;
+ break;
+
+ case RH_GET_DESCRIPTOR:
+ DBG("RH_GET_DESCRIPTOR: %x, %d", wValue, wLength);
+
+ switch (wValue) {
+ case (USB_DT_DEVICE << 8): /* device descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_dev_des),
+ wLength));
+ data_buf = root_hub_dev_des;
+ break;
+
+ case (USB_DT_CONFIG << 8): /* configuration descriptor */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_config_des),
+ wLength));
+ data_buf = root_hub_config_des;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x00): /* string 0 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index0),
+ wLength));
+ data_buf = root_hub_str_index0;
+ break;
+
+ case ((USB_DT_STRING << 8) | 0x01): /* string 1 descriptors */
+ len = min_t(unsigned int,
+ leni, min_t(unsigned int,
+ sizeof(root_hub_str_index1),
+ wLength));
+ data_buf = root_hub_str_index1;
+ break;
+
+ default:
+ ERR("invalid wValue");
+ stat = USB_ST_STALLED;
+ }
+
+ break;
+
+ case RH_GET_DESCRIPTOR | RH_CLASS:
+ DBG("RH_GET_DESCRIPTOR | RH_CLASS");
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ data_buf[0] = 0x09; /* min length; */
+ data_buf[1] = 0x29;
+ data_buf[2] = tmp & RH_A_NDP;
+ data_buf[3] = 0;
+ if (tmp & RH_A_PSM) /* per-port power switching? */
+ data_buf[3] |= 0x01;
+ if (tmp & RH_A_NOCP) /* no overcurrent reporting? */
+ data_buf[3] |= 0x10;
+ else if (tmp & RH_A_OCPM) /* per-port overcurrent rep? */
+ data_buf[3] |= 0x08;
+
+ /* Corresponds to data_buf[4-7] */
+ datab[1] = 0;
+ data_buf[5] = (tmp & RH_A_POTPGT) >> 24;
+
+ tmp = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ data_buf[7] = tmp & RH_B_DR;
+ if (data_buf[2] < 7)
+ data_buf[8] = 0xff;
+ else {
+ data_buf[0] += 2;
+ data_buf[8] = (tmp & RH_B_DR) >> 8;
+ data_buf[10] = data_buf[9] = 0xff;
+ }
+
+ len = min_t(unsigned int, leni,
+ min_t(unsigned int, data_buf[0], wLength));
+ break;
+
+ case RH_GET_CONFIGURATION:
+ DBG("RH_GET_CONFIGURATION");
+
+ *(__u8 *) data_buf = 0x01;
+ len = 1;
+ break;
+
+ case RH_SET_CONFIGURATION:
+ DBG("RH_SET_CONFIGURATION");
+
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPSC);
+ len = 0;
+ break;
+
+ default:
+ ERR("*** *** *** unsupported root hub command *** *** ***");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min_t(int, len, leni);
+ if (buffer != data_buf)
+ memcpy(buffer, data_buf, len);
+
+ dev->act_len = len;
+ dev->status = stat;
+ DBG("dev act_len %d, status %d", dev->act_len, dev->status);
+
+ dump_msg(dev, pipe, buffer, transfer_len, "RH(ret)");
+
+ return stat;
+}
+
+/* --- Transfer functions -------------------------------------------------- */
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ DBG("dev=%p pipe=%#lx buf=%p size=%d int=%d",
+ dev, pipe, buffer, len, interval);
+
+ return -1;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, struct devrequest *setup)
+{
+ int devnum = usb_pipedevice(pipe);
+ int epnum = usb_pipeendpoint(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int dir_in = usb_pipein(pipe);
+ int done, ret;
+
+ /* Control message is for the HUB? */
+ if (devnum == rh_devnum)
+ return isp116x_submit_rh_msg(dev, pipe, buffer, len, setup);
+
+ /* Ok, no HUB message so send the message to the device */
+
+ /* Setup phase */
+ DBG("--- SETUP PHASE --------------------------------");
+ usb_settoggle(dev, epnum, 1, 0);
+ ret = isp116x_submit_job(dev, pipe,
+ PTD_DIR_SETUP,
+ setup, sizeof(struct devrequest));
+ if (ret < 0) {
+ DBG("control setup phase error (ret = %d", ret);
+ return -1;
+ }
+
+ /* Data phase */
+ DBG("--- DATA PHASE ---------------------------------");
+ done = 0;
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ dir_in ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("control data phase error (ret = %d)", ret);
+ return -1;
+ }
+ done += ret;
+
+ if (dir_in && ret < max) /* short packet */
+ break;
+ }
+
+ /* Status phase */
+ DBG("--- STATUS PHASE -------------------------------");
+ usb_settoggle(dev, epnum, !dir_in, 1);
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_in ? PTD_DIR_IN : PTD_DIR_OUT, NULL, 0);
+ if (ret < 0) {
+ DBG("control status phase error (ret = %d", ret);
+ return -1;
+ }
+
+ dev->act_len = done;
+
+ dump_msg(dev, pipe, buffer, len, "DEV(ret)");
+
+ return done;
+}
+
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int dir_out = usb_pipeout(pipe);
+ int max = max_transfer_len(dev, pipe);
+ int done, ret;
+
+ DBG("--- BULK ---------------------------------------");
+ DBG("dev=%ld pipe=%ld buf=%p size=%d dir_out=%d",
+ usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
+
+ done = 0;
+ while (done < len) {
+ ret = isp116x_submit_job(dev, pipe,
+ !dir_out ? PTD_DIR_IN : PTD_DIR_OUT,
+ (__u8 *) buffer + done,
+ max > len - done ? len - done : max);
+ if (ret < 0) {
+ DBG("error on bulk message (ret = %d)", ret);
+ return -1;
+ }
+
+ done += ret;
+
+ if (!dir_out && ret < max) /* short packet */
+ break;
+ }
+
+ dev->act_len = done;
+
+ return 0;
+}
+
+/* --- Basic functions ----------------------------------------------------- */
+
+static int isp116x_sw_reset(struct isp116x *isp116x)
+{
+ int retries = 15;
+ int ret = 0;
+
+ DBG("");
+
+ isp116x->disabled = 1;
+
+ isp116x_write_reg16(isp116x, HCSWRES, HCSWRES_MAGIC);
+ isp116x_write_reg32(isp116x, HCCMDSTAT, HCCMDSTAT_HCR);
+ while (--retries) {
+ /* It usually resets within 1 ms */
+ wait_ms(1);
+ if (!(isp116x_read_reg32(isp116x, HCCMDSTAT) & HCCMDSTAT_HCR))
+ break;
+ }
+ if (!retries) {
+ ERR("software reset timeout");
+ ret = -1;
+ }
+ return ret;
+}
+
+static int isp116x_reset(struct isp116x *isp116x)
+{
+ unsigned long t;
+ u16 clkrdy = 0;
+ int ret, timeout = 15 /* ms */ ;
+
+ DBG("");
+
+ ret = isp116x_sw_reset(isp116x);
+ if (ret)
+ return ret;
+
+ for (t = 0; t < timeout; t++) {
+ clkrdy = isp116x_read_reg16(isp116x, HCuPINT) & HCuPINT_CLKRDY;
+ if (clkrdy)
+ break;
+ wait_ms(1);
+ }
+ if (!clkrdy) {
+ ERR("clock not ready after %dms", timeout);
+ /* After sw_reset the clock won't report to be ready, if
+ H_WAKEUP pin is high. */
+ ERR("please make sure that the H_WAKEUP pin is pulled low!");
+ ret = -1;
+ }
+ return ret;
+}
+
+static void isp116x_stop(struct isp116x *isp116x)
+{
+ u32 val;
+
+ DBG("");
+
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ /* Switch off ports' power, some devices don't come up
+ after next 'start' without this */
+ val = isp116x_read_reg32(isp116x, HCRHDESCA);
+ val &= ~(RH_A_NPS | RH_A_PSM);
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x_write_reg32(isp116x, HCRHSTATUS, RH_HS_LPS);
+
+ isp116x_sw_reset(isp116x);
+}
+
+/*
+ * Configure the chip. The chip must be successfully reset by now.
+ */
+static int isp116x_start(struct isp116x *isp116x)
+{
+ struct isp116x_platform_data *board = isp116x->board;
+ u32 val;
+
+ DBG("");
+
+ /* Clear interrupt status and disable all interrupt sources */
+ isp116x_write_reg16(isp116x, HCuPINT, 0xff);
+ isp116x_write_reg16(isp116x, HCuPINTENB, 0);
+
+ isp116x_write_reg16(isp116x, HCITLBUFLEN, ISP116x_ITL_BUFSIZE);
+ isp116x_write_reg16(isp116x, HCATLBUFLEN, ISP116x_ATL_BUFSIZE);
+
+ /* Hardware configuration */
+ val = HCHWCFG_DBWIDTH(1);
+ if (board->sel15Kres)
+ val |= HCHWCFG_15KRSEL;
+ /* Remote wakeup won't work without working clock */
+ if (board->remote_wakeup_enable)
+ val |= HCHWCFG_CLKNOTSTOP;
+ if (board->oc_enable)
+ val |= HCHWCFG_ANALOG_OC;
+ isp116x_write_reg16(isp116x, HCHWCFG, val);
+
+ /* --- Root hub configuration */
+ val = (25 << 24) & RH_A_POTPGT;
+ /* AN10003_1.pdf recommends RH_A_NPS (no power switching) to
+ be always set. Yet, instead, we request individual port
+ power switching. */
+ val |= RH_A_PSM;
+ /* Report overcurrent per port */
+ val |= RH_A_OCPM;
+ isp116x_write_reg32(isp116x, HCRHDESCA, val);
+ isp116x->rhdesca = isp116x_read_reg32(isp116x, HCRHDESCA);
+
+ val = RH_B_PPCM;
+ isp116x_write_reg32(isp116x, HCRHDESCB, val);
+ isp116x->rhdescb = isp116x_read_reg32(isp116x, HCRHDESCB);
+
+ val = 0;
+ if (board->remote_wakeup_enable)
+ val |= RH_HS_DRWE;
+ isp116x_write_reg32(isp116x, HCRHSTATUS, val);
+ isp116x->rhstatus = isp116x_read_reg32(isp116x, HCRHSTATUS);
+
+ isp116x_write_reg32(isp116x, HCFMINTVL, 0x27782edf);
+
+ /* Go operational */
+ val = HCCONTROL_USB_OPER;
+ if (board->remote_wakeup_enable)
+ val |= HCCONTROL_RWE;
+ isp116x_write_reg32(isp116x, HCCONTROL, val);
+
+ /* Disable ports to avoid race in device enumeration */
+ isp116x_write_reg32(isp116x, HCRHPORT1, RH_PS_CCS);
+ isp116x_write_reg32(isp116x, HCRHPORT2, RH_PS_CCS);
+
+ isp116x_show_regs(isp116x);
+
+ isp116x->disabled = 0;
+
+ return 0;
+}
+
+/* --- Init functions ------------------------------------------------------ */
+
+int isp116x_check_id(struct isp116x *isp116x)
+{
+ int val;
+
+ val = isp116x_read_reg16(isp116x, HCCHIPID);
+ if ((val & HCCHIPID_MASK) != HCCHIPID_MAGIC) {
+ ERR("invalid chip ID %04x", val);
+ return -1;
+ }
+
+ return 0;
+}
+
+int usb_lowlevel_init(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ /* Init device registers addr */
+ isp116x->addr_reg = (u16 *) ISP116X_HCD_ADDR;
+ isp116x->data_reg = (u16 *) ISP116X_HCD_DATA;
+
+ /* Setup specific board settings */
+#ifdef ISP116X_HCD_SEL15kRES
+ isp116x_board.sel15Kres = 1;
+#endif
+#ifdef ISP116X_HCD_OC_ENABLE
+ isp116x_board.oc_enable = 1;
+#endif
+#ifdef ISP116X_HCD_REMOTE_WAKEUP_ENABLE
+ isp116x_board.remote_wakeup_enable = 1;
+#endif
+ isp116x->board = &isp116x_board;
+
+ /* Try to get ISP116x silicon chip ID */
+ if (isp116x_check_id(isp116x) < 0)
+ return -1;
+
+ isp116x->disabled = 1;
+ isp116x->sleeping = 0;
+
+ isp116x_reset(isp116x);
+ isp116x_start(isp116x);
+
+ return 0;
+}
+
+int usb_lowlevel_stop(void)
+{
+ struct isp116x *isp116x = &isp116x_dev;
+
+ DBG("");
+
+ if (!isp116x->disabled)
+ isp116x_stop(isp116x);
+
+ return 0;
+}
+
+#endif /* CONFIG_USB_ISP116X_HCD */
diff --git a/drivers/isp116x.h b/drivers/isp116x.h
new file mode 100644
index 0000000..a3ce3b5
--- /dev/null
+++ b/drivers/isp116x.h
@@ -0,0 +1,489 @@
+/*
+ * ISP116x register declarations and HCD data structures
+ *
+ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (C) 2005 Olav Kongas <ok@artecdesign.ee>
+ * Portions:
+ * Copyright (C) 2004 Lothar Wassmann
+ * Copyright (C) 2004 Psion Teklogix
+ * Copyright (C) 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef DEBUG
+#define DBG(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#ifdef VERBOSE
+# define VDBG DBG
+#else
+# define VDBG(fmt, args...) do {} while (0)
+#endif
+
+#define ERR(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define WARN(fmt, args...) \
+ printf("isp116x: %s: " fmt "\n" , __FUNCTION__ , ## args)
+#define INFO(fmt, args...) \
+ printf("isp116x: " fmt "\n" , ## args)
+
+/* ------------------------------------------------------------------------- */
+
+/* us of 1ms frame */
+#define MAX_LOAD_LIMIT 850
+
+/* Full speed: max # of bytes to transfer for a single urb
+ at a time must be < 1024 && must be multiple of 64.
+ 832 allows transfering 4kiB within 5 frames. */
+#define MAX_TRANSFER_SIZE_FULLSPEED 832
+
+/* Low speed: there is no reason to schedule in very big
+ chunks; often the requested long transfers are for
+ string descriptors containing short strings. */
+#define MAX_TRANSFER_SIZE_LOWSPEED 64
+
+/* Bytetime (us), a rough indication of how much time it
+ would take to transfer a byte of useful data over USB */
+#define BYTE_TIME_FULLSPEED 1
+#define BYTE_TIME_LOWSPEED 20
+
+/* Buffer sizes */
+#define ISP116x_BUF_SIZE 4096
+#define ISP116x_ITL_BUFSIZE 0
+#define ISP116x_ATL_BUFSIZE ((ISP116x_BUF_SIZE) - 2*(ISP116x_ITL_BUFSIZE))
+
+#define ISP116x_WRITE_OFFSET 0x80
+
+/* --- ISP116x registers/bits ---------------------------------------------- */
+
+#define HCREVISION 0x00
+#define HCCONTROL 0x01
+#define HCCONTROL_HCFS (3 << 6) /* host controller
+ functional state */
+#define HCCONTROL_USB_RESET (0 << 6)
+#define HCCONTROL_USB_RESUME (1 << 6)
+#define HCCONTROL_USB_OPER (2 << 6)
+#define HCCONTROL_USB_SUSPEND (3 << 6)
+#define HCCONTROL_RWC (1 << 9) /* remote wakeup connected */
+#define HCCONTROL_RWE (1 << 10) /* remote wakeup enable */
+#define HCCMDSTAT 0x02
+#define HCCMDSTAT_HCR (1 << 0) /* host controller reset */
+#define HCCMDSTAT_SOC (3 << 16) /* scheduling overrun count */
+#define HCINTSTAT 0x03
+#define HCINT_SO (1 << 0) /* scheduling overrun */
+#define HCINT_WDH (1 << 1) /* writeback of done_head */
+#define HCINT_SF (1 << 2) /* start frame */
+#define HCINT_RD (1 << 3) /* resume detect */
+#define HCINT_UE (1 << 4) /* unrecoverable error */
+#define HCINT_FNO (1 << 5) /* frame number overflow */
+#define HCINT_RHSC (1 << 6) /* root hub status change */
+#define HCINT_OC (1 << 30) /* ownership change */
+#define HCINT_MIE (1 << 31) /* master interrupt enable */
+#define HCINTENB 0x04
+#define HCINTDIS 0x05
+#define HCFMINTVL 0x0d
+#define HCFMREM 0x0e
+#define HCFMNUM 0x0f
+#define HCLSTHRESH 0x11
+#define HCRHDESCA 0x12
+#define RH_A_NDP (0x3 << 0) /* # downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* overcurrent protection
+ mode */
+#define RH_A_NOCP (1 << 12) /* no overcurrent protection */
+#define RH_A_POTPGT (0xff << 24) /* power on -> power good
+ time */
+#define HCRHDESCB 0x13
+#define RH_B_DR (0xffff << 0) /* device removable flags */
+#define RH_B_PPCM (0xffff << 16) /* port power control mask */
+#define HCRHSTATUS 0x14
+#define RH_HS_LPS (1 << 0) /* local power status */
+#define RH_HS_OCI (1 << 1) /* over current indicator */
+#define RH_HS_DRWE (1 << 15) /* device remote wakeup
+ enable */
+#define RH_HS_LPSC (1 << 16) /* local power status change */
+#define RH_HS_OCIC (1 << 17) /* over current indicator
+ change */
+#define RH_HS_CRWE (1 << 31) /* clear remote wakeup
+ enable */
+#define HCRHPORT1 0x15
+#define RH_PS_CCS (1 << 0) /* current connect status */
+#define RH_PS_PES (1 << 1) /* port enable status */
+#define RH_PS_PSS (1 << 2) /* port suspend status */
+#define RH_PS_POCI (1 << 3) /* port over current
+ indicator */
+#define RH_PS_PRS (1 << 4) /* port reset status */
+#define RH_PS_PPS (1 << 8) /* port power status */
+#define RH_PS_LSDA (1 << 9) /* low speed device attached */
+#define RH_PS_CSC (1 << 16) /* connect status change */
+#define RH_PS_PESC (1 << 17) /* port enable status change */
+#define RH_PS_PSSC (1 << 18) /* port suspend status
+ change */
+#define RH_PS_OCIC (1 << 19) /* over current indicator
+ change */
+#define RH_PS_PRSC (1 << 20) /* port reset status change */
+#define HCRHPORT_CLRMASK (0x1f << 16)
+#define HCRHPORT2 0x16
+#define HCHWCFG 0x20
+#define HCHWCFG_15KRSEL (1 << 12)
+#define HCHWCFG_CLKNOTSTOP (1 << 11)
+#define HCHWCFG_ANALOG_OC (1 << 10)
+#define HCHWCFG_DACK_MODE (1 << 8)
+#define HCHWCFG_EOT_POL (1 << 7)
+#define HCHWCFG_DACK_POL (1 << 6)
+#define HCHWCFG_DREQ_POL (1 << 5)
+#define HCHWCFG_DBWIDTH_MASK (0x03 << 3)
+#define HCHWCFG_DBWIDTH(n) (((n) << 3) & HCHWCFG_DBWIDTH_MASK)
+#define HCHWCFG_INT_POL (1 << 2)
+#define HCHWCFG_INT_TRIGGER (1 << 1)
+#define HCHWCFG_INT_ENABLE (1 << 0)
+#define HCDMACFG 0x21
+#define HCDMACFG_BURST_LEN_MASK (0x03 << 5)
+#define HCDMACFG_BURST_LEN(n) (((n) << 5) & HCDMACFG_BURST_LEN_MASK)
+#define HCDMACFG_BURST_LEN_1 HCDMACFG_BURST_LEN(0)
+#define HCDMACFG_BURST_LEN_4 HCDMACFG_BURST_LEN(1)
+#define HCDMACFG_BURST_LEN_8 HCDMACFG_BURST_LEN(2)
+#define HCDMACFG_DMA_ENABLE (1 << 4)
+#define HCDMACFG_BUF_TYPE_MASK (0x07 << 1)
+#define HCDMACFG_CTR_SEL (1 << 2)
+#define HCDMACFG_ITLATL_SEL (1 << 1)
+#define HCDMACFG_DMA_RW_SELECT (1 << 0)
+#define HCXFERCTR 0x22
+#define HCuPINT 0x24
+#define HCuPINT_SOF (1 << 0)
+#define HCuPINT_ATL (1 << 1)
+#define HCuPINT_AIIEOT (1 << 2)
+#define HCuPINT_OPR (1 << 4)
+#define HCuPINT_SUSP (1 << 5)
+#define HCuPINT_CLKRDY (1 << 6)
+#define HCuPINTENB 0x25
+#define HCCHIPID 0x27
+#define HCCHIPID_MASK 0xff00
+#define HCCHIPID_MAGIC 0x6100
+#define HCSCRATCH 0x28
+#define HCSWRES 0x29
+#define HCSWRES_MAGIC 0x00f6
+#define HCITLBUFLEN 0x2a
+#define HCATLBUFLEN 0x2b
+#define HCBUFSTAT 0x2c
+#define HCBUFSTAT_ITL0_FULL (1 << 0)
+#define HCBUFSTAT_ITL1_FULL (1 << 1)
+#define HCBUFSTAT_ATL_FULL (1 << 2)
+#define HCBUFSTAT_ITL0_DONE (1 << 3)
+#define HCBUFSTAT_ITL1_DONE (1 << 4)
+#define HCBUFSTAT_ATL_DONE (1 << 5)
+#define HCRDITL0LEN 0x2d
+#define HCRDITL1LEN 0x2e
+#define HCITLPORT 0x40
+#define HCATLPORT 0x41
+
+/* PTD accessor macros. */
+#define PTD_GET_COUNT(p) (((p)->count & PTD_COUNT_MSK) >> 0)
+#define PTD_COUNT(v) (((v) << 0) & PTD_COUNT_MSK)
+#define PTD_GET_TOGGLE(p) (((p)->count & PTD_TOGGLE_MSK) >> 10)
+#define PTD_TOGGLE(v) (((v) << 10) & PTD_TOGGLE_MSK)
+#define PTD_GET_ACTIVE(p) (((p)->count & PTD_ACTIVE_MSK) >> 11)
+#define PTD_ACTIVE(v) (((v) << 11) & PTD_ACTIVE_MSK)
+#define PTD_GET_CC(p) (((p)->count & PTD_CC_MSK) >> 12)
+#define PTD_CC(v) (((v) << 12) & PTD_CC_MSK)
+#define PTD_GET_MPS(p) (((p)->mps & PTD_MPS_MSK) >> 0)
+#define PTD_MPS(v) (((v) << 0) & PTD_MPS_MSK)
+#define PTD_GET_SPD(p) (((p)->mps & PTD_SPD_MSK) >> 10)
+#define PTD_SPD(v) (((v) << 10) & PTD_SPD_MSK)
+#define PTD_GET_LAST(p) (((p)->mps & PTD_LAST_MSK) >> 11)
+#define PTD_LAST(v) (((v) << 11) & PTD_LAST_MSK)
+#define PTD_GET_EP(p) (((p)->mps & PTD_EP_MSK) >> 12)
+#define PTD_EP(v) (((v) << 12) & PTD_EP_MSK)
+#define PTD_GET_LEN(p) (((p)->len & PTD_LEN_MSK) >> 0)
+#define PTD_LEN(v) (((v) << 0) & PTD_LEN_MSK)
+#define PTD_GET_DIR(p) (((p)->len & PTD_DIR_MSK) >> 10)
+#define PTD_DIR(v) (((v) << 10) & PTD_DIR_MSK)
+#define PTD_GET_B5_5(p) (((p)->len & PTD_B5_5_MSK) >> 13)
+#define PTD_B5_5(v) (((v) << 13) & PTD_B5_5_MSK)
+#define PTD_GET_FA(p) (((p)->faddr & PTD_FA_MSK) >> 0)
+#define PTD_FA(v) (((v) << 0) & PTD_FA_MSK)
+#define PTD_GET_FMT(p) (((p)->faddr & PTD_FMT_MSK) >> 7)
+#define PTD_FMT(v) (((v) << 7) & PTD_FMT_MSK)
+
+/* Hardware transfer status codes -- CC from ptd->count */
+#define TD_CC_NOERROR 0x00
+#define TD_CC_CRC 0x01
+#define TD_CC_BITSTUFFING 0x02
+#define TD_CC_DATATOGGLEM 0x03
+#define TD_CC_STALL 0x04
+#define TD_DEVNOTRESP 0x05
+#define TD_PIDCHECKFAIL 0x06
+#define TD_UNEXPECTEDPID 0x07
+#define TD_DATAOVERRUN 0x08
+#define TD_DATAUNDERRUN 0x09
+ /* 0x0A, 0x0B reserved for hardware */
+#define TD_BUFFEROVERRUN 0x0C
+#define TD_BUFFERUNDERRUN 0x0D
+ /* 0x0E, 0x0F reserved for HCD */
+#define TD_NOTACCESSED 0x0F
+
+/* ------------------------------------------------------------------------- */
+
+#define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
+#define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
+
+/* Philips transfer descriptor */
+struct ptd {
+ u16 count;
+#define PTD_COUNT_MSK (0x3ff << 0)
+#define PTD_TOGGLE_MSK (1 << 10)
+#define PTD_ACTIVE_MSK (1 << 11)
+#define PTD_CC_MSK (0xf << 12)
+ u16 mps;
+#define PTD_MPS_MSK (0x3ff << 0)
+#define PTD_SPD_MSK (1 << 10)
+#define PTD_LAST_MSK (1 << 11)
+#define PTD_EP_MSK (0xf << 12)
+ u16 len;
+#define PTD_LEN_MSK (0x3ff << 0)
+#define PTD_DIR_MSK (3 << 10)
+#define PTD_DIR_SETUP (0)
+#define PTD_DIR_OUT (1)
+#define PTD_DIR_IN (2)
+#define PTD_B5_5_MSK (1 << 13)
+ u16 faddr;
+#define PTD_FA_MSK (0x7f << 0)
+#define PTD_FMT_MSK (1 << 7)
+} __attribute__ ((packed, aligned(2)));
+
+struct isp116x_ep {
+ struct usb_device *udev;
+ struct ptd ptd;
+
+ u8 maxpacket;
+ u8 epnum;
+ u8 nextpid;
+
+ u16 length; /* of current packet */
+ unsigned char *data; /* to databuf */
+
+ u16 error_count;
+};
+
+/* URB struct */
+#define N_URB_TD 48
+#define URB_DEL 1
+typedef struct {
+ struct isp116x_ep *ed;
+ void *transfer_buffer; /* (in) associated data buffer */
+ int actual_length; /* (return) actual transfer length */
+ unsigned long pipe; /* (in) pipe information */
+#if 0
+ int state;
+#endif
+} urb_priv_t;
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+};
+
+struct isp116x {
+ u16 *addr_reg;
+ u16 *data_reg;
+
+ struct isp116x_platform_data *board;
+
+ struct dentry *dentry;
+ unsigned long stat1, stat2, stat4, stat8, stat16;
+
+ /* Status flags */
+ unsigned disabled:1;
+ unsigned sleeping:1;
+
+ /* Root hub registers */
+ u32 rhdesca;
+ u32 rhdescb;
+ u32 rhstatus;
+ u32 rhport[2];
+
+ /* Schedule for the current frame */
+ struct isp116x_ep *atl_active;
+ int atl_buflen;
+ int atl_bufshrt;
+ int atl_last_dir;
+ int atl_finishing;
+};
+
+/* ------------------------------------------------- */
+
+/* Inter-io delay (ns). The chip is picky about access timings; it
+ * expects at least:
+ * 150ns delay between consecutive accesses to DATA_REG,
+ * 300ns delay between access to ADDR_REG and DATA_REG
+ * OE, WE MUST NOT be changed during these intervals
+ */
+#if defined(UDELAY)
+#define isp116x_delay(h,d) udelay(d)
+#else
+#define isp116x_delay(h,d) do {} while (0)
+#endif
+
+static inline void isp116x_write_addr(struct isp116x *isp116x, unsigned reg)
+{
+ writew(reg & 0xff, isp116x->addr_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_write_data16(struct isp116x *isp116x, u16 val)
+{
+ writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline void isp116x_raw_write_data16(struct isp116x *isp116x, u16 val)
+{
+ __raw_writew(val, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u16 isp116x_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline u16 isp116x_raw_read_data16(struct isp116x *isp116x)
+{
+ u16 val;
+
+ val = __raw_readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+static inline void isp116x_write_data32(struct isp116x *isp116x, u32 val)
+{
+ writew(val & 0xffff, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ writew(val >> 16, isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+}
+
+static inline u32 isp116x_read_data32(struct isp116x *isp116x)
+{
+ u32 val;
+
+ val = (u32) readw(isp116x->data_reg);
+ isp116x_delay(isp116x, UDELAY);
+ val |= ((u32) readw(isp116x->data_reg)) << 16;
+ isp116x_delay(isp116x, UDELAY);
+ return val;
+}
+
+/* Let's keep register access functions out of line. Hint:
+ we wait at least 150 ns at every access.
+*/
+static u16 isp116x_read_reg16(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data16(isp116x);
+}
+
+static u32 isp116x_read_reg32(struct isp116x *isp116x, unsigned reg)
+{
+ isp116x_write_addr(isp116x, reg);
+ return isp116x_read_data32(isp116x);
+}
+
+static void isp116x_write_reg16(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data16(isp116x, (u16) (val & 0xffff));
+}
+
+static void isp116x_write_reg32(struct isp116x *isp116x, unsigned reg,
+ unsigned val)
+{
+ isp116x_write_addr(isp116x, reg | ISP116x_WRITE_OFFSET);
+ isp116x_write_data32(isp116x, (u32) val);
+}
+
+/* --- USB HUB constants (not OHCI-specific; see hub.h) -------------------- */
+
+/* destination of request */
+#define RH_INTERFACE 0x01
+#define RH_ENDPOINT 0x02
+#define RH_OTHER 0x03
+
+#define RH_CLASS 0x20
+#define RH_VENDOR 0x40
+
+/* Requests: bRequest << 8 | bmRequestType */
+#define RH_GET_STATUS 0x0080
+#define RH_CLEAR_FEATURE 0x0100
+#define RH_SET_FEATURE 0x0300
+#define RH_SET_ADDRESS 0x0500
+#define RH_GET_DESCRIPTOR 0x0680
+#define RH_SET_DESCRIPTOR 0x0700
+#define RH_GET_CONFIGURATION 0x0880
+#define RH_SET_CONFIGURATION 0x0900
+#define RH_GET_STATE 0x0280
+#define RH_GET_INTERFACE 0x0A80
+#define RH_SET_INTERFACE 0x0B00
+#define RH_SYNC_FRAME 0x0C80
+/* Our Vendor Specific Request */
+#define RH_SET_EP 0x2000
+
+/* Hub port features */
+#define RH_PORT_CONNECTION 0x00
+#define RH_PORT_ENABLE 0x01
+#define RH_PORT_SUSPEND 0x02
+#define RH_PORT_OVER_CURRENT 0x03
+#define RH_PORT_RESET 0x04
+#define RH_PORT_POWER 0x08
+#define RH_PORT_LOW_SPEED 0x09
+
+#define RH_C_PORT_CONNECTION 0x10
+#define RH_C_PORT_ENABLE 0x11
+#define RH_C_PORT_SUSPEND 0x12
+#define RH_C_PORT_OVER_CURRENT 0x13
+#define RH_C_PORT_RESET 0x14
+
+/* Hub features */
+#define RH_C_HUB_LOCAL_POWER 0x00
+#define RH_C_HUB_OVER_CURRENT 0x01
+
+#define RH_DEVICE_REMOTE_WAKEUP 0x00
+#define RH_ENDPOINT_STALL 0x01
+
+#define RH_ACK 0x01
+#define RH_REQ_ERR -1
+#define RH_NACK 0x00
diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c
index 88c1df6..aee8727 100644
--- a/drivers/nand/nand_util.c
+++ b/drivers/nand/nand_util.c
@@ -37,6 +37,7 @@
#include <command.h>
#include <watchdog.h>
#include <malloc.h>
+#include <div64.h>
#include <nand.h>
#include <jffs2/jffs2.h>
@@ -208,10 +209,10 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
}
if (!opts->quiet) {
- int percent = (int)
- ((unsigned long long)
+ unsigned long long n =(unsigned long long)
(erase.addr+meminfo->erasesize-opts->offset)
- * 100 / erase_length);
+ * 100;
+ int percent = (int)do_div(n, erase_length);
/* output progress message only at whole percent
* steps to reduce the number of messages printed
@@ -475,10 +476,9 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
imglen -= readlen;
if (!opts->quiet) {
- int percent = (int)
- ((unsigned long long)
- (opts->length-imglen) * 100
- / opts->length);
+ unsigned long long n = (unsigned long long)
+ (opts->length-imglen) * 100;
+ int percent = (int)do_div(n, opts->length);
/* output progress message only at whole percent
* steps to reduce the number of messages printed
* on (slow) serial consoles
@@ -651,10 +651,9 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
}
if (!opts->quiet) {
- int percent = (int)
- ((unsigned long long)
- (opts->length-imglen) * 100
- / opts->length);
+ unsigned long long n = (unsigned long long)
+ (opts->length-imglen) * 100;
+ int percent = (int)do_div(n ,opts->length);
/* output progress message only at whole percent
* steps to reduce the number of messages printed
* on (slow) serial consoles
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 5f20962..0f5232a 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -98,7 +98,7 @@ static void qe_sdma_init(void)
out_be32(&p->sdaqmr, 0);
/* Allocate 2KB temporary buffer for sdma */
- sdma_buffer_base = qe_muram_alloc(2048, 64);
+ sdma_buffer_base = qe_muram_alloc(2048, 4096);
out_be32(&p->sdwbcr, sdma_buffer_base & QE_SDEBCR_BA_MASK);
/* Clear sdma status */
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index 0bcd0a9..400b1a6 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -29,7 +29,7 @@
#define QE_NUM_OF_BRGS 16
#define UCC_MAX_NUM 8
-#define QE_DATAONLY_BASE (uint)(128)
+#define QE_DATAONLY_BASE 0
#define QE_DATAONLY_SIZE (QE_MURAM_SIZE - QE_DATAONLY_BASE)
/* QE threads SNUM
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 60bef9a..c011123 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -71,6 +71,7 @@ static struct tsec_info_struct tsec_info[] = {
#else
{TSEC1_PHY_ADDR, TSEC_GIGABIT, TSEC1_PHYIDX},
#endif
+#else
{0, 0, 0},
#endif
#if defined(CONFIG_TSEC2)
@@ -79,6 +80,7 @@ static struct tsec_info_struct tsec_info[] = {
#else
{TSEC2_PHY_ADDR, TSEC_GIGABIT, TSEC2_PHYIDX},
#endif
+#else
{0, 0, 0},
#endif
#ifdef CONFIG_MPC85XX_FEC
@@ -296,9 +298,9 @@ static int init_phy(struct eth_device *dev)
volatile tsec_t *regs = (volatile tsec_t *)(TSEC_BASE_ADDR);
/* Assign a Physical address to the TBI */
- regs->tbipa = TBIPA_VALUE;
+ regs->tbipa = CFG_TBIPA_VALUE;
regs = (volatile tsec_t *)(TSEC_BASE_ADDR + TSEC_SIZE);
- regs->tbipa = TBIPA_VALUE;
+ regs->tbipa = CFG_TBIPA_VALUE;
asm("sync");
/* Reset MII (due to new addresses) */
diff --git a/drivers/tsec.h b/drivers/tsec.h
index 7bf3dee..2f0092a 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -70,7 +70,9 @@
#define miim_end -2
#define miim_read -1
-#define TBIPA_VALUE 0x1f
+#ifndef CFG_TBIPA_VALUE
+ #define CFG_TBIPA_VALUE 0x1f
+#endif
#define MIIMCFG_INIT_VALUE 0x00000003
#define MIIMCFG_RESET 0x80000000
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.c b/drivers/usb_ohci.c
index 5b2c56c..d6b745f 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -1,5 +1,11 @@
/*
- * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200.
+ * URB OHCI HCD (Host Controller Driver) for USB on the AT91RM9200 and PCI bus.
+ *
+ * Interrupt support is added. Now, it has been tested
+ * on ULI1575 chip and works well with USB keyboard.
+ *
+ * (C) Copyright 2007
+ * Zhang Wei, Freescale Semiconductor, Inc. <wei.zhang@freescale.com>
*
* (C) Copyright 2003
* Gary Jennejohn, DENX Software Engineering <gj@denx.de>
@@ -21,7 +27,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -32,38 +38,66 @@
*/
/*
* IMPORTANT NOTES
- * 1 - you MUST define LITTLEENDIAN in the configuration file for the
- * board or this driver will NOT work!
+ * 1 - Read doc/README.generic_usb_ohci
* 2 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- * 3 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
+ * (BBB) and USB keyboard. There is NO support for Isochronous pipes!
+ * 2 - when running on a PQFP208 AT91RM9200, define CONFIG_AT91C_PQFP_UHPBUG
* to activate workaround for bug #41 or this driver will NOT work!
*/
#include <common.h>
-/* #include <pci.h> no PCI on the S3C24X0 */
-#ifdef CONFIG_USB_OHCI
+#ifdef CONFIG_USB_OHCI_NEW
-#include <asm/arch/hardware.h>
+#include <asm/byteorder.h>
+
+#if defined(CONFIG_PCI_OHCI)
+# include <pci.h>
+#endif
#include <malloc.h>
#include <usb.h>
#include "usb_ohci.h"
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#if defined(CONFIG_ARM920T) || \
+ defined(CONFIG_S3C2400) || \
+ defined(CONFIG_S3C2410) || \
+ defined(CONFIG_440EP) || \
+ defined(CONFIG_PCI_OHCI) || \
+ defined(CONFIG_MPC5200)
+# define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#endif
+
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
+#undef DEBUG
+#undef SHOW_INFO
+#undef OHCI_FILL_TRACE
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-#define readl(a) (*((vu_long *)(a)))
-#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
+/*
+ * e.g. PCI controllers need this
+ */
+#ifdef CFG_OHCI_SWAP_REG_ACCESS
+# define readl(a) __swap_32(*((vu_long *)(a)))
+# define writel(a, b) (*((vu_long *)(b)) = __swap_32((vu_long)a))
+#else
+# define readl(a) (*((vu_long *)(a)))
+# define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
+#endif /* CFG_OHCI_SWAP_REG_ACCESS */
#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-#undef DEBUG
+#ifdef CONFIG_PCI_OHCI
+static struct pci_device_id ohci_pci_ids[] = {
+ {0x10b9, 0x5237}, /* ULI1575 PCI OHCI module ids */
+ /* Please add supported PCI OHCI controller ids here */
+ {0, 0}
+};
+#endif
+
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
@@ -77,8 +111,13 @@
#define info(format, arg...) do {} while(0)
#endif
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
+#ifdef CFG_OHCI_BE_CONTROLLER
+# define m16_swap(x) cpu_to_be16(x)
+# define m32_swap(x) cpu_to_be32(x)
+#else
+# define m16_swap(x) cpu_to_le16(x)
+# define m32_swap(x) cpu_to_le32(x)
+#endif /* CFG_OHCI_BE_CONTROLLER */
/* global ohci_t */
static ohci_t gohci;
@@ -88,13 +127,13 @@ struct ohci_hcca ghcca[1];
struct ohci_hcca *phcca;
/* this allocates EDs for all possible endpoints */
struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
/* RHSC flag */
int got_rhsc;
/* device which was disconnected */
struct usb_device *devgone;
+
+
/*-------------------------------------------------------------------------*/
/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
@@ -147,6 +186,7 @@ static void urb_free_priv (urb_priv_t * urb)
}
}
}
+ free(urb);
}
/*-------------------------------------------------------------------------*/
@@ -157,11 +197,10 @@ static int sohci_get_current_frame_number (struct usb_device * dev);
/* debug| print the main components of an URB
* small: 0) header + data packets 1) just header */
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
+static void pkt_print (urb_priv_t *purb, struct usb_device * dev,
+ unsigned long pipe, void * buffer,
int transfer_len, struct devrequest * setup, char * str, int small)
{
- urb_priv_t * purb = &urb_priv;
-
dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
str,
sohci_get_current_frame_number (dev),
@@ -170,7 +209,7 @@ static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffe
usb_pipeout (pipe)? 'O': 'I',
usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
(usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
+ (purb ? purb->actual_length : 0),
transfer_len, dev->status);
#ifdef OHCI_VERBOSE_DEBUG
if (!small) {
@@ -184,10 +223,11 @@ static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffe
}
if (transfer_len > 0 && buffer) {
printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
+ (purb ? purb->actual_length : 0),
transfer_len);
len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
+ transfer_len:
+ (purb ? purb->actual_length : 0);
for (i = 0; i < 16 && i < len; i++)
printf (" %02x", ((__u8 *) buffer) [i]);
printf ("%s\n", i < len? "...": "");
@@ -383,13 +423,17 @@ static void ohci_dump (ohci_t *controller, int verbose)
/* get a transfer request */
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
+int sohci_submit_job(urb_priv_t *urb, struct devrequest *setup)
{
ohci_t *ohci;
ed_t * ed;
- urb_priv_t *purb_priv;
+ urb_priv_t *purb_priv = urb;
int i, size = 0;
+ struct usb_device *dev = urb->dev;
+ unsigned long pipe = urb->pipe;
+ void *buffer = urb->transfer_buffer;
+ int transfer_len = urb->transfer_buffer_length;
+ int interval = urb->interval;
ohci = &gohci;
@@ -400,8 +444,11 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
return -1;
}
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb->finished = 0;
+
/* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
+ if (!(ed = ep_add_ed (dev, pipe, interval, 1))) {
err("sohci_submit_job: ENOMEM");
return -1;
}
@@ -415,13 +462,17 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
size = (transfer_len == 0)? 2:
(transfer_len - 1) / 4096 + 3;
break;
+ case PIPE_INTERRUPT: /* 1 TD */
+ size = 1;
+ break;
}
+ ed->purb = urb;
+
if (size >= (N_URB_TD - 1)) {
err("need %d TDs, only have %d", size, N_URB_TD);
return -1;
}
- purb_priv = &urb_priv;
purb_priv->pipe = pipe;
/* fill the private part of the URB */
@@ -457,6 +508,40 @@ int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
return 0;
}
+static inline int sohci_return_job(struct ohci *hc, urb_priv_t *urb)
+{
+ struct ohci_regs *regs = hc->regs;
+
+ switch (usb_pipetype (urb->pipe)) {
+ case PIPE_INTERRUPT:
+ /* implicitly requeued */
+ if (urb->dev->irq_handle &&
+ (urb->dev->irq_act_len = urb->actual_length)) {
+ writel (OHCI_INTR_WDH, &regs->intrenable);
+ readl (&regs->intrenable); /* PCI posting flush */
+ urb->dev->irq_handle(urb->dev);
+ writel (OHCI_INTR_WDH, &regs->intrdisable);
+ readl (&regs->intrdisable); /* PCI posting flush */
+ }
+ urb->actual_length = 0;
+ td_submit_job (
+ urb->dev,
+ urb->pipe,
+ urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ NULL,
+ urb,
+ urb->interval);
+ break;
+ case PIPE_CONTROL:
+ case PIPE_BULK:
+ break;
+ default:
+ return 0;
+ }
+ return 1;
+}
+
/*-------------------------------------------------------------------------*/
#ifdef DEBUG
@@ -474,13 +559,73 @@ static int sohci_get_current_frame_number (struct usb_device *usb_dev)
* ED handling functions
*-------------------------------------------------------------------------*/
+/* search for the right branch to insert an interrupt ed into the int tree
+ * do some load ballancing;
+ * returns the branch and
+ * sets the interval to interval = 2^integer (ld (interval)) */
+
+static int ep_int_ballance (ohci_t * ohci, int interval, int load)
+{
+ int i, branch = 0;
+
+ /* search for the least loaded interrupt endpoint
+ * branch of all 32 branches
+ */
+ for (i = 0; i < 32; i++)
+ if (ohci->ohci_int_load [branch] > ohci->ohci_int_load [i])
+ branch = i;
+
+ branch = branch % interval;
+ for (i = branch; i < 32; i += interval)
+ ohci->ohci_int_load [i] += load;
+
+ return branch;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* 2^int( ld (inter)) */
+
+static int ep_2_n_interval (int inter)
+{
+ int i;
+ for (i = 0; ((inter >> i) > 1 ) && (i < 5); i++);
+ return 1 << i;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* the int tree is a binary tree
+ * in order to process it sequentially the indexes of the branches have to be mapped
+ * the mapping reverses the bits of a word of num_bits length */
+
+static int ep_rev (int num_bits, int word)
+{
+ int i, wout = 0;
+
+ for (i = 0; i < num_bits; i++)
+ wout |= (((word >> i) & 1) << (num_bits - i - 1));
+ return wout;
+}
+
+/*-------------------------------------------------------------------------*
+ * ED handling functions
+ *-------------------------------------------------------------------------*/
+
/* link an ed into one of the HC chains */
static int ep_link (ohci_t *ohci, ed_t *edi)
{
volatile ed_t *ed = edi;
+ int int_branch;
+ int i;
+ int inter;
+ int interval;
+ int load;
+ __u32 * ed_p;
ed->state = ED_OPER;
+ ed->int_interval = 0;
switch (ed->type) {
case PIPE_CONTROL:
@@ -488,7 +633,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
if (ohci->ed_controltail == NULL) {
writel (ed, &ohci->regs->ed_controlhead);
} else {
- ohci->ed_controltail->hwNextED = m32_swap (ed);
+ ohci->ed_controltail->hwNextED = m32_swap ((unsigned long)ed);
}
ed->ed_prev = ohci->ed_controltail;
if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
@@ -504,7 +649,7 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
if (ohci->ed_bulktail == NULL) {
writel (ed, &ohci->regs->ed_bulkhead);
} else {
- ohci->ed_bulktail->hwNextED = m32_swap (ed);
+ ohci->ed_bulktail->hwNextED = m32_swap ((unsigned long)ed);
}
ed->ed_prev = ohci->ed_bulktail;
if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
@@ -514,19 +659,59 @@ static int ep_link (ohci_t *ohci, ed_t *edi)
}
ohci->ed_bulktail = edi;
break;
+
+ case PIPE_INTERRUPT:
+ load = ed->int_load;
+ interval = ep_2_n_interval (ed->int_period);
+ ed->int_interval = interval;
+ int_branch = ep_int_ballance (ohci, interval, load);
+ ed->int_branch = int_branch;
+
+ for (i = 0; i < ep_rev (6, interval); i += inter) {
+ inter = 1;
+ for (ed_p = &(ohci->hcca->int_table[ep_rev (5, i) + int_branch]);
+ (*ed_p != 0) && (((ed_t *)ed_p)->int_interval >= interval);
+ ed_p = &(((ed_t *)ed_p)->hwNextED))
+ inter = ep_rev (6, ((ed_t *)ed_p)->int_interval);
+ ed->hwNextED = *ed_p;
+ *ed_p = m32_swap(ed);
+ }
+ break;
}
return 0;
}
/*-------------------------------------------------------------------------*/
+/* scan the periodic table to find and unlink this ED */
+static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
+ unsigned index, unsigned period)
+{
+ for (; index < NUM_INTS; index += period) {
+ __u32 *ed_p = &ohci->hcca->int_table [index];
+
+ /* ED might have been unlinked through another path */
+ while (*ed_p != 0) {
+ if (((struct ed *)m32_swap (ed_p)) == ed) {
+ *ed_p = ed->hwNextED;
+ break;
+ }
+ ed_p = & (((struct ed *)m32_swap (ed_p))->hwNextED);
+ }
+ }
+}
+
+
/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed */
-static int ep_unlink (ohci_t *ohci, ed_t *ed)
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
{
+ volatile ed_t *ed = edi;
+ int i;
+
ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
switch (ed->type) {
@@ -563,6 +748,12 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed)
((ed_t *)m32_swap (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
}
break;
+
+ case PIPE_INTERRUPT:
+ periodic_unlink (ohci, ed, 0, 1);
+ for (i = ed->int_branch; i < 32; i += ed->int_interval)
+ ohci->ohci_int_load[i] -= ed->int_load;
+ break;
}
ed->state = ED_UNLINK;
return 0;
@@ -571,13 +762,16 @@ static int ep_unlink (ohci_t *ohci, ed_t *ed)
/*-------------------------------------------------------------------------*/
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
+/* add/reinit an endpoint; this should be done once at the
+ * usb_set_configuration command, but the USB stack is a little bit
+ * stateless so we do it at every transaction if the state of the ed
+ * is ED_NEW then a dummy td is added and the state is changed to
+ * ED_UNLINK in all other cases the state is left unchanged the ed
+ * info fields are setted anyway even though most of them should not
+ * change
+ */
+static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe,
+ int interval, int load)
{
td_t *td;
ed_t *ed_ret;
@@ -596,7 +790,7 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
ed->hwINFO = m32_swap (OHCI_ED_SKIP); /* skip ed */
/* dummy td; end of td list for ed */
td = td_alloc (usb_dev);
- ed->hwTailP = m32_swap (td);
+ ed->hwTailP = m32_swap ((unsigned long)td);
ed->hwHeadP = ed->hwTailP;
ed->state = ED_UNLINK;
ed->type = usb_pipetype (pipe);
@@ -610,6 +804,11 @@ static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
| usb_pipeslow (pipe) << 13
| usb_maxpacket (usb_dev, pipe) << 16);
+ if (ed->type == PIPE_INTERRUPT && ed->state == ED_UNLINK) {
+ ed->int_period = interval;
+ ed->int_load = load;
+ }
+
return ed_ret;
}
@@ -654,13 +853,12 @@ static void td_fill (ohci_t *ohci, unsigned int info,
data = 0;
td->hwINFO = m32_swap (info);
- td->hwCBP = m32_swap (data);
+ td->hwCBP = m32_swap ((unsigned long)data);
if (data)
- td->hwBE = m32_swap (data + len - 1);
+ td->hwBE = m32_swap ((unsigned long)(data + len - 1));
else
td->hwBE = 0;
- td->hwNextTD = m32_swap (td_pt);
- td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000);
+ td->hwNextTD = m32_swap ((unsigned long)td_pt);
/* append to queue */
td->ed->hwTailP = td->hwNextTD;
@@ -725,6 +923,13 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
if (!ohci->sleeping)
writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
break;
+
+ case PIPE_INTERRUPT:
+ info = usb_pipeout (urb->pipe)?
+ TD_CC | TD_DP_OUT | toggle:
+ TD_CC | TD_R | TD_DP_IN | toggle;
+ td_fill (ohci, info, data, data_len, dev, cnt++, urb);
+ break;
}
if (urb->length != cnt)
dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
@@ -740,7 +945,7 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
static void dl_transfer_length(td_t * td)
{
__u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
+ urb_priv_t *lurb_priv = td->ed->purb;
tdINFO = m32_swap (td->hwINFO);
tdBE = m32_swap (td->hwBE);
@@ -777,7 +982,7 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
td_list = (td_t *)td_list_hc;
if (TD_CC_GET (m32_swap (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
+ lurb_priv = td_list->ed->purb;
dbg(" USB-error/status: %x : %p",
TD_CC_GET (m32_swap (td_list->hwINFO)), td_list);
if (td_list->ed->hwHeadP & m32_swap (0x1)) {
@@ -789,6 +994,9 @@ static td_t * dl_reverse_done_list (ohci_t *ohci)
} else
td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
}
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
}
td_list->next_dl_td = td_rev;
@@ -814,10 +1022,10 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
while (td_list) {
td_list_next = td_list->next_dl_td;
- lurb_priv = &urb_priv;
tdINFO = m32_swap (td_list->hwINFO);
ed = td_list->ed;
+ lurb_priv = ed->purb;
dl_transfer_length(td_list);
@@ -828,7 +1036,24 @@ static int dl_done_list (ohci_t *ohci, td_t *td_list)
stat = cc_to_error[cc];
}
- if (ed->state != ED_NEW) {
+ /* see if this done list makes for all TD's of current URB,
+ * and mark the URB finished if so */
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+#if 1
+ if ((ed->state & (ED_OPER | ED_UNLINK)) &&
+ (lurb_priv->state != URB_DEL))
+#else
+ if ((ed->state & (ED_OPER | ED_UNLINK)))
+#endif
+ lurb_priv->finished = sohci_return_job(ohci,
+ lurb_priv);
+ else
+ dbg("dl_done_list: strange.., ED state %x, ed->state\n");
+ } else
+ dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
+ lurb_priv->length);
+ if (ed->state != ED_NEW &&
+ (usb_pipetype (lurb_priv->pipe) != PIPE_INTERRUPT)) {
edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
edTailP = m32_swap (ed->hwTailP);
@@ -974,7 +1199,6 @@ int rh_check_port_status(ohci_t *controller)
#ifdef CONFIG_AT91C_PQFP_UHPBUG
ndp = (ndp == 2) ? 1:0;
#endif
-
for (i = 0; i < ndp; i++) {
temp = roothub_portstatus (controller, i);
/* check for a device disconnect */
@@ -1003,8 +1227,7 @@ static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
__u16 wLength;
#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
+pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
#else
wait_ms(1);
#endif
@@ -1014,9 +1237,9 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
}
bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
+ wValue = cpu_to_le16 (cmd->value);
+ wIndex = cpu_to_le16 (cmd->index);
+ wLength = cpu_to_le16 (cmd->length);
info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
@@ -1031,17 +1254,17 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
*/
case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
+ *(__u16 *) data_buf = cpu_to_le16 (1); OK (2);
case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
+ *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
+ *(__u16 *) data_buf = cpu_to_le16 (0); OK (2);
case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
+ *(__u32 *) data_buf = cpu_to_le32 (
RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
OK (4);
case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
+ *(__u32 *) data_buf = cpu_to_le32 (RD_RH_PORTSTAT); OK (4);
case RH_CLEAR_FEATURE | RH_ENDPOINT:
switch (wValue) {
@@ -1088,7 +1311,9 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
WR_RH_PORTSTAT (RH_PS_PRS);
OK (0);
case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
+ WR_RH_PORTSTAT (RH_PS_PPS );
+ wait_ms(100);
+ OK (0);
case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
if (RD_RH_PORTSTAT & RH_PS_CCS)
WR_RH_PORTSTAT (RH_PS_PES );
@@ -1170,7 +1395,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
}
len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
+ min_t(unsigned int, data_buf [0], wLength));
OK (len);
}
@@ -1196,9 +1421,7 @@ pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
dev->status = stat;
#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
+ pkt_print(NULL, dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
#else
wait_ms(1);
#endif
@@ -1216,6 +1439,16 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int stat = 0;
int maxsize = usb_maxpacket(dev, pipe);
int timeout;
+ urb_priv_t *urb;
+
+ urb = malloc(sizeof(urb_priv_t));
+ memset(urb, 0, sizeof(urb_priv_t));
+
+ urb->dev = dev;
+ urb->pipe = pipe;
+ urb->transfer_buffer = buffer;
+ urb->transfer_buffer_length = transfer_len;
+ urb->interval = interval;
/* device pulled? Shortcut the action. */
if (devgone == dev) {
@@ -1224,8 +1457,8 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
}
#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+ urb->actual_length = 0;
+ pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
#else
wait_ms(1);
#endif
@@ -1235,13 +1468,15 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
return -1;
}
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
+ if (sohci_submit_job(urb, setup) < 0) {
err("sohci_submit_job failed");
return -1;
}
+#if 0
wait_ms(10);
/* ohci_dump_status(&gohci); */
+#endif
/* allow more time for a BULK device to react - some are slow */
#define BULK_TO 5000 /* timeout in milliseconds */
@@ -1258,51 +1493,47 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
stat = USB_ST_CRC_ERR;
break;
}
- if (stat >= 0 && stat != 0xff) {
+
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb->finished)) {
/* 0xff is returned for an SF-interrupt */
break;
}
+
if (--timeout) {
wait_ms(1);
+ if (!urb->finished)
+ dbg("\%");
+
} else {
err("CTL:TIMEOUT ");
+ dbg("submit_common_msg: TO status %x\n", stat);
+ urb->finished = 1;
stat = USB_ST_CRC_ERR;
break;
}
}
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
dev->status = stat;
dev->act_len = transfer_len;
#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
+ pkt_print(urb, dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
#else
wait_ms(1);
#endif
/* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
+ if (usb_pipetype (pipe) != PIPE_INTERRUPT)
+ urb_free_priv (urb);
return 0;
}
@@ -1321,8 +1552,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
info("submit_control_msg");
#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
+ pkt_print(NULL, dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
#else
wait_ms(1);
#endif
@@ -1345,7 +1575,8 @@ int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval)
{
info("submit_int_msg");
- return -1;
+ return submit_common_msg(dev, pipe, buffer, transfer_len, NULL,
+ interval);
}
/*-------------------------------------------------------------------------*
@@ -1381,7 +1612,8 @@ static int hc_reset (ohci_t *ohci)
readl(&ohci->regs->control));
/* Reset USB (needed by some controllers) */
- writel (0, &ohci->regs->control);
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
/* HC Reset requires max 10 us delay */
writel (OHCI_HCR, &ohci->regs->cmdstatus);
@@ -1458,26 +1690,38 @@ static int hc_start (ohci_t * ohci)
/*-------------------------------------------------------------------------*/
+/* Poll USB interrupt. */
+void usb_event_poll(void)
+{
+ hc_interrupt();
+}
+
/* an interrupt happens */
-static int
-hc_interrupt (void)
+static int hc_interrupt (void)
{
ohci_t *ohci = &gohci;
struct ohci_regs *regs = ohci->regs;
int ints;
int stat = -1;
- if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) {
- ints = OHCI_INTR_WDH;
- } else {
- ints = readl (&regs->intrstatus);
+ if ((ohci->hcca->done_head != 0) &&
+ !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+ ints = OHCI_INTR_WDH;
+ } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+ } else if ((ints &= readl (&regs->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
}
/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
if (ints & OHCI_INTR_RHSC) {
got_rhsc = 1;
+ stat = 0xff;
}
if (ints & OHCI_INTR_UE) {
@@ -1502,8 +1746,10 @@ hc_interrupt (void)
if (ints & OHCI_INTR_WDH) {
wait_ms(1);
writel (OHCI_INTR_WDH, &regs->intrdisable);
+ (void)readl (&regs->intrdisable); /* flush */
stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
writel (OHCI_INTR_WDH, &regs->intrenable);
+ (void)readl (&regs->intrdisable); /* flush */
}
if (ints & OHCI_INTR_SO) {
@@ -1549,14 +1795,22 @@ static char ohci_inited = 0;
int usb_lowlevel_init(void)
{
- /*
- * Enable USB host clock.
- */
- *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
- *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */
+#ifdef CONFIG_PCI_OHCI
+ pci_dev_t pdev;
+#endif
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant init */
+ if(usb_cpu_init())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant init */
+ if(usb_board_init())
+ return -1;
+#endif
memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
/* align the storage */
if ((__u32)&ghcca[0] & 0xff) {
@@ -1582,29 +1836,60 @@ int usb_lowlevel_init(void)
gohci.disabled = 1;
gohci.sleeping = 0;
gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)AT91_USB_HOST_BASE;
+#ifdef CONFIG_PCI_OHCI
+ pdev = pci_find_devices(ohci_pci_ids, 0);
+
+ if (pdev != -1) {
+ u16 vid, did;
+ u32 base;
+ pci_read_config_word(pdev, PCI_VENDOR_ID, &vid);
+ pci_read_config_word(pdev, PCI_DEVICE_ID, &did);
+ printf("OHCI pci controller (%04x, %04x) found @(%d:%d:%d)\n",
+ vid, did, (pdev >> 16) & 0xff,
+ (pdev >> 11) & 0x1f, (pdev >> 8) & 0x7);
+ pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &base);
+ printf("OHCI regs address 0x%08x\n", base);
+ gohci.regs = (struct ohci_regs *)base;
+ } else
+ return -1;
+#else
+ gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
+#endif
gohci.flags = 0;
- gohci.slot_name = "at91rm9200";
+ gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
if (hc_reset (&gohci) < 0) {
hc_release_ohci (&gohci);
- /* Initialization failed */
- *AT91C_PMC_PCER = AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+ err ("can't reset usb-%s", gohci.slot_name);
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_init_fail();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_init_fail();
+#endif
return -1;
}
/* FIXME this is a second HC reset; why?? */
-/* writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
- wait_ms (10);*/
-
+ /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+ wait_ms(10); */
if (hc_start (&gohci) < 0) {
err ("can't start usb-%s", gohci.slot_name);
hc_release_ohci (&gohci);
/* Initialization failed */
- *AT91C_PMC_PCER = AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_stop();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_stop();
+#endif
return -1;
}
@@ -1626,10 +1911,19 @@ int usb_lowlevel_stop(void)
/* TODO release any interrupts, etc. */
/* call hc_release_ohci() here ? */
hc_reset (&gohci);
- /* may not want to do this */
- *AT91C_PMC_PCER = 1 << AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ if(usb_board_stop())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ if(usb_cpu_stop())
+ return -1;
+#endif
+
return 0;
}
-
-#endif /* CONFIG_USB_OHCI */
+#endif /* CONFIG_USB_OHCI_NEW */
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.h b/drivers/usb_ohci.h
index ecb4e93..380cb4c 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.h
+++ b/drivers/usb_ohci.h
@@ -7,6 +7,15 @@
* usb-ohci.h
*/
+/* functions for doing board or CPU specific setup/cleanup */
+extern int usb_board_init(void);
+extern int usb_board_stop(void);
+extern int usb_board_init_fail(void);
+
+extern int usb_cpu_init(void);
+extern int usb_cpu_stop(void);
+extern int usb_cpu_init_fail(void);
+
static int cc_to_error[16] = {
@@ -55,7 +64,8 @@ struct ed {
struct ed *ed_rm_list;
struct usb_device *usb_dev;
- __u32 unused[3];
+ void *purb;
+ __u32 unused[2];
} __attribute((aligned(16)));
typedef struct ed ed_t;
@@ -104,7 +114,9 @@ struct td {
__u32 hwNextTD; /* Next TD Pointer */
__u32 hwBE; /* Memory Buffer End Pointer */
+/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
__u16 hwPSW[MAXPSW];
+/* #endif */
__u8 unused;
__u8 index;
struct ed *ed;
@@ -128,8 +140,13 @@ typedef struct td td_t;
#define NUM_INTS 32 /* part of the OHCI standard */
struct ohci_hcca {
__u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
__u16 frame_no; /* current frame number */
__u16 pad1; /* set to 0 on each frame_no change */
+#endif
__u32 done_head; /* info returned for an interrupt */
u8 reserved_for_hc[116];
} __attribute((aligned(256)));
@@ -138,7 +155,9 @@ struct ohci_hcca {
/*
* Maximum number of root hub ports.
*/
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
+# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#endif
/*
* This is the structure of the OHCI controller's memory mapped I/O
@@ -172,7 +191,7 @@ struct ohci_regs {
__u32 a;
__u32 b;
__u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
+ __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
} roothub;
} __attribute((aligned(32)));
@@ -331,9 +350,14 @@ typedef struct
ed_t *ed;
__u16 length; /* number of tds associated with this request */
__u16 td_cnt; /* number of tds already serviced */
+ struct usb_device *dev;
int state;
unsigned long pipe;
+ void *transfer_buffer;
+ int transfer_buffer_length;
+ int interval;
int actual_length;
+ int finished;
td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
} urb_priv_t;
#define URB_DEL 1
@@ -357,6 +381,7 @@ typedef struct ohci {
struct ohci_regs *regs; /* OHCI controller's memory */
+ int ohci_int_load[32]; /* load of the 32 Interrupt Chains (for load balancing)*/
ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
ed_t *ed_bulktail; /* last endpoint of bulk list */
ed_t *ed_controltail; /* last endpoint of control list */
@@ -379,7 +404,8 @@ struct ohci_device {
/* endpoint */
static int ep_link(ohci_t * ohci, ed_t * ed);
static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
+static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe,
+ int interval, int load);
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usbdcore_ep0.c b/drivers/usbdcore_ep0.c
index 260befe..1e44f32 100644
--- a/drivers/usbdcore_ep0.c
+++ b/drivers/usbdcore_ep0.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
* Based on
* linux/drivers/usbd/ep0.c
*
@@ -39,11 +42,17 @@
* function driver. This may need to change.
*
* XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
*/
#include <common.h>
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if defined(CONFIG_USB_DEVICE)
#include "usbdcore.h"
#if 0
@@ -69,7 +78,7 @@ static int ep0_get_status (struct usb_device_instance *device,
char *cp;
urb->actual_length = 2;
- cp = urb->buffer;
+ cp = (char*)urb->buffer;
cp[0] = cp[1] = 0;
switch (requesttype) {
@@ -115,7 +124,7 @@ static int ep0_get_one (struct usb_device_instance *device, struct urb *urb,
*
* Copy configuration data to urb transfer buffer if there is room for it.
*/
-static void copy_config (struct urb *urb, void *data, int max_length,
+void copy_config (struct urb *urb, void *data, int max_length,
int max_buf)
{
int available;
@@ -128,10 +137,7 @@ static void copy_config (struct urb *urb, void *data, int max_length,
dbg_ep0 (1, "data is NULL");
return;
}
- if (!(length = *(unsigned char *) data)) {
- dbg_ep0 (1, "length is zero");
- return;
- }
+ length = max_length;
if (length > max_length) {
dbg_ep0 (1, "length: %d >= max_length: %d", length,
@@ -192,7 +198,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
/* setup tx urb */
urb->actual_length = 0;
- cp = urb->buffer;
+ cp = (char*)urb->buffer;
dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
@@ -200,7 +206,6 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
case USB_DESCRIPTOR_TYPE_DEVICE:
{
struct usb_device_descriptor *device_descriptor;
-
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
@@ -214,20 +219,16 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
/* correct the correct control endpoint 0 max packet size into the descriptor */
device_descriptor =
(struct usb_device_descriptor *) urb->buffer;
- device_descriptor->bMaxPacketSize0 =
- urb->device->bus->maxpacketsize;
}
- /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
+ dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
break;
case USB_DESCRIPTOR_TYPE_CONFIGURATION:
{
- int bNumInterface;
struct usb_configuration_descriptor
*configuration_descriptor;
struct usb_device_descriptor *device_descriptor;
-
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
@@ -251,130 +252,35 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
index);
return -1;
}
+ dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
copy_config (urb, configuration_descriptor,
- sizeof (struct
- usb_configuration_descriptor),
- max);
-
-
- /* iterate across interfaces for specified configuration */
- dbg_ep0 (0, "bNumInterfaces: %d",
- configuration_descriptor->bNumInterfaces);
- for (bNumInterface = 0;
- bNumInterface <
- configuration_descriptor->bNumInterfaces;
- bNumInterface++) {
- int bAlternateSetting;
- struct usb_interface_instance
- *interface_instance;
-
- dbg_ep0 (3, "[%d] bNumInterfaces: %d",
- bNumInterface,
- configuration_descriptor->bNumInterfaces);
-
- if (! (interface_instance = usbd_device_interface_instance (device,
- port, index, bNumInterface)))
- {
- dbg_ep0 (3, "[%d] interface_instance NULL",
- bNumInterface);
- return -1;
- }
- /* iterate across interface alternates */
- for (bAlternateSetting = 0;
- bAlternateSetting < interface_instance->alternates;
- bAlternateSetting++) {
- /*int class; */
- int bNumEndpoint;
- struct usb_interface_descriptor *interface_descriptor;
-
- struct usb_alternate_instance *alternate_instance;
-
- dbg_ep0 (3, "[%d:%d] alternates: %d",
- bNumInterface,
- bAlternateSetting,
- interface_instance->alternates);
-
- if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) {
- dbg_ep0 (3, "[%d] alternate_instance NULL",
- bNumInterface);
- return -1;
- }
- /* copy descriptor for this interface */
- copy_config (urb, alternate_instance->interface_descriptor,
- sizeof (struct usb_interface_descriptor),
- max);
-
- /*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */
- /* alternate_instance->classes, alternate_instance->endpoints); */
-
- /* iterate across classes for this alternate interface */
-#if 0
- for (class = 0;
- class < alternate_instance->classes;
- class++) {
- struct usb_class_descriptor *class_descriptor;
- /*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */
- /* class, alternate_instance->classes); */
- if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) {
- dbg_ep0 (3, "[%d] class NULL",
- class);
- return -1;
- }
- /* copy descriptor for this class */
- copy_config (urb, class_descriptor,
- sizeof (struct usb_class_descriptor),
- max);
- }
-#endif
-
- /* iterate across endpoints for this alternate interface */
- interface_descriptor = alternate_instance->interface_descriptor;
- for (bNumEndpoint = 0;
- bNumEndpoint < alternate_instance->endpoints;
- bNumEndpoint++) {
- struct usb_endpoint_descriptor *endpoint_descriptor;
- dbg_ep0 (3, "[%d:%d:%d] endpoint: %d",
- bNumInterface,
- bAlternateSetting,
- bNumEndpoint,
- interface_descriptor->
- bNumEndpoints);
- if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) {
- dbg_ep0 (3, "[%d] endpoint NULL",
- bNumEndpoint);
- return -1;
- }
- /* copy descriptor for this endpoint */
- copy_config (urb, endpoint_descriptor,
- sizeof (struct usb_endpoint_descriptor),
- max);
- }
- }
- }
- dbg_ep0 (3, "lengths: %d %d",
- le16_to_cpu (configuration_descriptor->wTotalLength),
- urb->actual_length);
+ cpu_to_le16(configuration_descriptor->wTotalLength),
+ max);
}
+
break;
case USB_DESCRIPTOR_TYPE_STRING:
{
struct usb_string_descriptor *string_descriptor;
-
if (!(string_descriptor = usbd_get_string (index))) {
+ serial_printf("Invalid string index %d\n", index);
return -1;
}
- /*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */
+ dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
copy_config (urb, string_descriptor, string_descriptor->bLength, max);
}
break;
case USB_DESCRIPTOR_TYPE_INTERFACE:
+ serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_ENDPOINT:
+ serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_HID:
{
+ serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
@@ -403,6 +309,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
break;
case USB_DESCRIPTOR_TYPE_REPORT:
{
+ serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
@@ -434,12 +341,19 @@ static int ep0_get_descriptor (struct usb_device_instance *device,
#endif
}
break;
+ case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+ {
+ /* If a USB device supports both a full speed and low speed operation
+ * we must send a Device_Qualifier descriptor here
+ */
+ return -1;
+ }
default:
return -1;
}
- dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d packet size: %2d",
+ dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
urb->buffer, urb->buffer_length, urb->actual_length,
device->bus->endpoint_array[0].tx_packetSize);
/*
@@ -495,6 +409,12 @@ int ep0_recv_setup (struct urb *urb)
/* handle USB Standard Request (c.f. USB Spec table 9-2) */
if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+ if(device->device_state <= STATE_CONFIGURED){
+ /* Attempt to handle a CDC specific request if we are
+ * in the configured state.
+ */
+ return device->cdc_recv_setup(request,urb);
+ }
dbg_ep0 (1, "non standard request: %x",
request->bmRequestType & USB_REQ_TYPE_MASK);
return -1; /* Stall here */
@@ -567,6 +487,7 @@ int ep0_recv_setup (struct urb *urb)
le16_to_cpu (request->wValue) & 0xff);
case USB_REQ_GET_CONFIGURATION:
+ serial_printf("get config %d\n", device->configuration);
return ep0_get_one (device, urb,
device->configuration);
@@ -642,7 +563,6 @@ int ep0_recv_setup (struct urb *urb)
/*dbg_ep0(2, "address: %d %d %d", */
/* request->wValue, le16_to_cpu(request->wValue), device->address); */
- serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
return 0;
case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
@@ -653,9 +573,10 @@ int ep0_recv_setup (struct urb *urb)
/* c.f. 9.4.7 - the top half of wValue is reserved */
/* */
if ((device->configuration =
- le16_to_cpu (request->wValue) & 0x7f) != 0) {
+ le16_to_cpu (request->wValue) & 0xFF80) != 0) {
/* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
/* is the same is configuration zero */
+ serial_printf("error setting dev->config to zero!\n");
device->configuration = 0; /* TBR - ?????? */
}
/* reset interface and alternate settings */
diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c
new file mode 100644
index 0000000..e87284b
--- /dev/null
+++ b/drivers/usbdcore_mpc8xx.c
@@ -0,0 +1,1400 @@
+/*
+ * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
+ * bodonoghue@CodeHermit.ie
+ *
+ * References
+ * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * Notes :
+ * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
+ * packet to force the USB re-transmit protocol.
+ *
+ * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console
+ * be careful that tracing doesn't create Hiesen-bugs with respect to
+ * response timeouts to control requests.
+ *
+ * 3. This driver should be able to support any higher level driver that
+ * that wants to do either of the two standard UDC implementations
+ * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence
+ * gserial and cdc_acm should work with this code.
+ *
+ * 4. NAK events never actually get raised at all, the documentation
+ * is just wrong !
+ *
+ * 5. For some reason, cbd_datlen is *always* +2 the value it should be.
+ * this means that having an RX cbd of 16 bytes is not possible, since
+ * the same size is reported for 14 bytes received as 16 bytes received
+ * until we can find out why this happens, RX cbds must be limited to 8
+ * bytes. TODO: check errata for this behaviour.
+ *
+ * 6. Right now this code doesn't support properly powering up with the USB
+ * cable attached to the USB host my development board the Adder87x doesn't
+ * have a pull-up fitted to allow this, so it is necessary to power the
+ * board and *then* attached the USB cable to the host. However somebody
+ * with a different design in their board may be able to keep the cable
+ * constantly connected and simply enable/disable a pull-up re
+ * figure 31.1 in MPC885RM.pdf instead of having to power up the board and
+ * then attach the cable !
+ *
+ */
+#include <common.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
+#include <commproc.h>
+#include "usbdcore.h"
+#include "usbdcore_mpc8xx.h"
+#include "usbdcore_ep0.h"
+
+#define ERR(fmt, args...)\
+ serial_printf("ERROR : [%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#ifdef __DEBUG_UDC__
+#define DBG(fmt,args...)\
+ serial_printf("[%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#else
+#define DBG(fmt,args...)
+#endif
+
+/* Static Data */
+#ifdef __SIMULATE_ERROR__
+static char err_poison_test = 0;
+#endif
+static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
+static u32 address_base = STATE_NOT_READY;
+static mpc8xx_udc_state_t udc_state = 0;
+static struct usb_device_instance *udc_device = 0;
+static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
+static volatile cbd_t *tx_cbd[TX_RING_SIZE];
+static volatile cbd_t *rx_cbd[RX_RING_SIZE];
+static volatile immap_t *immr = 0;
+static volatile cpm8xx_t *cp = 0;
+static volatile usb_pram_t *usb_paramp = 0;
+static volatile usb_t *usbp = 0;
+static int rx_ct = 0;
+static int tx_ct = 0;
+
+/* Static Function Declarations */
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_stall (unsigned int ep);
+static void mpc8xx_udc_flush_tx_fifo (int epid);
+static void mpc8xx_udc_flush_rx_fifo (void);
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb);
+static void mpc8xx_udc_dump_request (struct usb_device_request *request);
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp);
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_cbd_init (void);
+static void mpc8xx_udc_endpoint_init (void);
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_set_nak (unsigned int ep);
+static short mpc8xx_udc_handle_txerr (void);
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
+
+/******************************************************************************
+ Global Linkage
+ *****************************************************************************/
+
+/* udc_init
+ *
+ * Do initial bus gluing
+ */
+int udc_init (void)
+{
+ /* Init various pointers */
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *) & (immr->im_cpm);
+ usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
+ usbp = (usb_t *) & (cp->cp_scc[0]);
+
+ memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS));
+
+ udc_device = 0;
+ udc_state = STATE_NOT_READY;
+
+ usbp->usmod = 0x00;
+ usbp->uscom = 0;
+
+ /* Set USB Frame #0, Respond at Address & Get a clock source */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_clock_init (immr, cp);
+
+ /* PA15, PA14 as perhiperal USBRXD and USBOE */
+ immr->im_ioport.iop_padir &= ~0x0003;
+ immr->im_ioport.iop_papar |= 0x0003;
+
+ /* PC11/PC10 as peripheral USBRXP USBRXN */
+ immr->im_ioport.iop_pcso |= 0x0030;
+
+ /* PC7/PC6 as perhiperal USBTXP and USBTXN */
+ immr->im_ioport.iop_pcdir |= 0x0300;
+ immr->im_ioport.iop_pcpar |= 0x0300;
+
+ /* Set the base address */
+ address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE);
+
+ /* Initialise endpoints and circular buffers */
+ mpc8xx_udc_endpoint_init ();
+ mpc8xx_udc_cbd_init ();
+
+ /* Assign allocated Dual Port Endpoint descriptors */
+ usb_paramp->ep0ptr = (u32) endpoints[0];
+ usb_paramp->ep1ptr = (u32) endpoints[1];
+ usb_paramp->ep2ptr = (u32) endpoints[2];
+ usb_paramp->ep3ptr = (u32) endpoints[3];
+ usb_paramp->frame_n = 0;
+
+ DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
+ usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
+ usb_paramp->ep3ptr);
+
+ return 0;
+}
+
+/* udc_irq
+ *
+ * Poll for whatever events may have occured
+ */
+void udc_irq (void)
+{
+ int epid = 0;
+ volatile cbd_t *rx_cbdp = 0;
+ volatile cbd_t *rx_cbdp_base = 0;
+
+ if (udc_state != STATE_READY) {
+ return;
+ }
+
+ if (usbp->usber & USB_E_BSY) {
+ /* This shouldn't happen. If it does then it's a bug ! */
+ usbp->usber |= USB_E_BSY;
+ mpc8xx_udc_flush_rx_fifo ();
+ }
+
+ /* Scan all RX/Bidirectional Endpoints for RX data. */
+ for (epid = 0; epid < MAX_ENDPOINTS; epid++) {
+ if (!ep_ref[epid].prx) {
+ continue;
+ }
+ rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
+
+ do {
+ if (!(rx_cbdp->cbd_sc & RX_BD_E)) {
+
+ if (rx_cbdp->cbd_sc & 0x1F) {
+ /* Corrupt data discard it.
+ * Controller has NAK'd this packet.
+ */
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ } else {
+ if (!epid) {
+ mpc8xx_udc_ep0_rx (rx_cbdp);
+
+ } else {
+ /* Process data */
+ mpc8xx_udc_set_nak (epid);
+ mpc8xx_udc_epn_rx (epid, rx_cbdp);
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+ }
+ }
+
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ ep_ref[epid].prx = rx_cbdp;
+ } else {
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ }
+
+ } while (rx_cbdp != rx_cbdp_base);
+ }
+
+ /* Handle TX events as appropiate, the correct place to do this is
+ * in a tx routine. Perhaps TX on epn was pre-empted by ep0
+ */
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ mpc8xx_udc_handle_txerr ();
+ }
+
+ /* Switch to the default state, respond at the default address */
+ if (usbp->usber & USB_E_RESET) {
+ usbp->usber |= USB_E_RESET;
+ usbp->usaddr = 0x00;
+ udc_device->device_state = STATE_DEFAULT;
+ }
+
+ /* if(usbp->usber&USB_E_IDLE){
+ We could suspend here !
+ usbp->usber|=USB_E_IDLE;
+ DBG("idle state change\n");
+ }
+ if(usbp->usbs){
+ We could resume here when IDLE is deasserted !
+ Not worth doing, so long as we are self powered though.
+ }
+ */
+
+ return;
+}
+
+/* udc_endpoint_write
+ *
+ * Write some data to an endpoint
+ */
+int udc_endpoint_write (struct usb_endpoint_instance *epi)
+{
+ int ep = 0;
+ short epid = 1, unnak = 0, ret = 0;
+
+ if (udc_state != STATE_READY) {
+ ERR ("invalid udc_state != STATE_READY!\n");
+ return -1;
+ }
+
+ if (!udc_device || !epi) {
+ return -1;
+ }
+
+ if (udc_device->device_state != STATE_CONFIGURED) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ if (ep >= MAX_ENDPOINTS) {
+ return -1;
+ }
+
+ /* Set NAK for all RX endpoints during TX */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+
+ /* Don't set NAK on DATA IN/CONTROL endpoints */
+ if (ep_ref[epid].sc & USB_DIR_IN) {
+ continue;
+ }
+
+ if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) {
+ unnak |= 1 << epid;
+ }
+
+ mpc8xx_udc_set_nak (epid);
+ }
+
+ mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep],
+ epi->tx_urb);
+ ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]);
+
+ /* Remove temporary NAK */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+ if (unnak & (1 << epid)) {
+ udc_unset_nak (epid);
+ }
+ }
+
+ return ret;
+}
+
+/* mpc8xx_udc_assign_urb
+ *
+ * Associate a given urb to an endpoint TX or RX transmit/receive buffers
+ */
+static int mpc8xx_udc_assign_urb (int ep, char direction)
+{
+ struct usb_endpoint_instance *epi = 0;
+
+ if (ep >= MAX_ENDPOINTS) {
+ goto err;
+ }
+ epi = &udc_device->bus->endpoint_array[ep];
+ if (!epi) {
+ goto err;
+ }
+
+ if (!ep_ref[ep].urb) {
+ ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array);
+ if (!ep_ref[ep].urb) {
+ goto err;
+ }
+ } else {
+ ep_ref[ep].urb->actual_length = 0;
+ }
+
+ switch (direction) {
+ case USB_DIR_IN:
+ epi->tx_urb = ep_ref[ep].urb;
+ break;
+ case USB_DIR_OUT:
+ epi->rcv_urb = ep_ref[ep].urb;
+ break;
+ default:
+ goto err;
+ }
+ return 0;
+
+ err:
+ udc_state = STATE_ERROR;
+ return -1;
+}
+
+/* udc_setup_ep
+ *
+ * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
+ * Isochronous endpoints aren't yet supported!
+ */
+void udc_setup_ep (struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *epi)
+{
+ uchar direction = 0;
+ int ep_attrib = 0;
+
+ if (epi && (ep < MAX_ENDPOINTS)) {
+
+ if (ep == 0) {
+ if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL
+ || epi->tx_attributes !=
+ USB_ENDPOINT_XFER_CONTROL) {
+
+ /* ep0 must be a control endpoint */
+ udc_state = STATE_ERROR;
+ return;
+
+ }
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = 0x0000;
+ return;
+ }
+
+ if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+
+ direction = 1;
+ ep_attrib = epi->tx_attributes;
+ epi->rcv_packetSize = 0;
+ ep_ref[ep].sc |= USB_DIR_IN;
+ } else {
+
+ direction = 0;
+ ep_attrib = epi->rcv_attributes;
+ epi->tx_packetSize = 0;
+ ep_ref[ep].sc &= ~USB_DIR_IN;
+ }
+
+ if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address
+ & USB_ENDPOINT_DIR_MASK)) {
+ return;
+ }
+
+ switch (ep_attrib) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = ep << 12;
+ epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
+
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ if (direction) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ 0);
+ } else {
+ mpc8xx_udc_cbd_attach (ep,
+ 0,
+ epi->rcv_packetSize);
+ }
+ }
+ usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8);
+
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ default:
+ serial_printf ("Error endpoint attrib %d>3\n", ep_attrib);
+ udc_state = STATE_ERROR;
+ break;
+ }
+ }
+
+}
+
+/* udc_connect
+ *
+ * Move state, switch on the USB
+ */
+void udc_connect (void)
+{
+ /* Enable pull-up resistor on D+
+ * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_READY;
+ usbp->usmod |= USMOD_EN;
+ }
+}
+
+/* udc_disconnect
+ *
+ * Disconnect is not used but, is included for completeness
+ */
+void udc_disconnect (void)
+{
+ /* Disable pull-up resistor on D-
+ * TODO: fix a pullup resistor to control this
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_NOT_READY;
+ }
+ usbp->usmod &= ~USMOD_EN;
+}
+
+/* udc_enable
+ *
+ * Grab an EP0 URB, register interest in a subset of USB events
+ */
+void udc_enable (struct usb_device_instance *device)
+{
+ if (udc_state == STATE_ERROR) {
+ return;
+ }
+
+ udc_device = device;
+
+ if (!ep_ref[0].urb) {
+ ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array);
+ }
+
+ /* Register interest in all events except SOF, enable transceiver */
+ usbp->usber = 0x03FF;
+ usbp->usbmr = 0x02F7;
+
+ return;
+}
+
+/* udc_disable
+ *
+ * disable the currently hooked device
+ */
+void udc_disable (void)
+{
+ int i = 0;
+
+ if (udc_state == STATE_ERROR) {
+ DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n");
+ return;
+ }
+
+ udc_device = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ if (ep_ref[i].urb) {
+ usbd_dealloc_urb (ep_ref[i].urb);
+ ep_ref[i].urb = 0;
+ }
+ }
+
+ usbp->usbmr = 0x00;
+ usbp->usmod = ~USMOD_EN;
+ udc_state = STATE_NOT_READY;
+}
+
+/* udc_startup_events
+ *
+ * Enable the specified device
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+ udc_enable (device);
+ if (udc_state == STATE_READY) {
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+ }
+}
+
+/* udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ *
+ */
+void udc_set_nak (int epid)
+{
+ if (epid) {
+ mpc8xx_udc_set_nak (epid);
+ }
+}
+
+/* udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ *
+ */
+void udc_unset_nak (int epid)
+{
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) {
+ usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK);
+ __asm__ ("eieio");
+ }
+}
+
+/******************************************************************************
+ Static Linkage
+******************************************************************************/
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ */
+
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
+ 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* mpc8xx_udc_stall
+ *
+ * Force returning of STALL tokens on the given endpoint. Protocol or function
+ * STALL conditions are permissable here
+ */
+static void mpc8xx_udc_stall (unsigned int ep)
+{
+ usbp->usep[ep] |= STALL_BITMASK;
+}
+
+/* mpc8xx_udc_set_nak
+ *
+ * Force returning of NAK responses for the given endpoint as a kind of very
+ * simple flow control
+ */
+static void mpc8xx_udc_set_nak (unsigned int ep)
+{
+ usbp->usep[ep] |= NAK_BITMASK;
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_handle_txerr
+ *
+ * Handle errors relevant to TX. Return a status code to allow calling
+ * indicative of what if anything happened
+ */
+static short mpc8xx_udc_handle_txerr ()
+{
+ short ep = 0, ret = 0;
+
+ for (; ep < TX_RING_SIZE; ep++) {
+ if (usbp->usber & (0x10 << ep)) {
+
+ /* Timeout or underrun */
+ if (tx_cbd[ep]->cbd_sc & 0x06) {
+ ret = 1;
+ mpc8xx_udc_flush_tx_fifo (ep);
+
+ } else {
+ if (usbp->usep[ep] & STALL_BITMASK) {
+ if (!ep) {
+ usbp->usep[ep] &= ~STALL_BITMASK;
+ }
+ } /* else NAK */
+ }
+ usbp->usber |= (0x10 << ep);
+ }
+ }
+ return ret;
+}
+
+/* mpc8xx_udc_advance_rx
+ *
+ * Advance cbd rx
+ */
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
+{
+ if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
+ *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+
+ } else {
+ (*rx_cbdp)++;
+ }
+}
+
+
+/* mpc8xx_udc_flush_tx_fifo
+ *
+ * Flush a given TX fifo. Assumes one tx cbd per endpoint
+ */
+static void mpc8xx_udc_flush_tx_fifo (int epid)
+{
+ volatile cbd_t *tx_cbdp = 0;
+
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ /* TX stop */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ usbp->uscom = 0x40 | 0;
+
+ /* reset ring */
+ tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
+
+
+ endpoints[epid]->tptr = endpoints[epid]->tbase;
+ endpoints[epid]->tstate = 0x00;
+ endpoints[epid]->tbcnt = 0x00;
+
+ /* TX start */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ return;
+}
+
+/* mpc8xx_udc_flush_rx_fifo
+ *
+ * For the sake of completeness of the namespace, it seems like
+ * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
+ * If RX_BD_E is true => a driver bug either here or in an upper layer
+ * not polling frequently enough. If RX_BD_E is true we have told the host
+ * we have accepted data but, the CPM found it had no-where to put that data
+ * which needless to say would be a bad thing.
+ */
+static void mpc8xx_udc_flush_rx_fifo ()
+{
+ int i = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n",
+ rx_cbd[i], rx_cbd[i]->cbd_datlen,
+ rx_cbd[i]->cbd_sc);
+
+ }
+ }
+ ERR ("BUG : Input over-run\n");
+}
+
+/* mpc8xx_udc_clear_rxbd
+ *
+ * Release control of RX CBD to CP.
+ */
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp)
+{
+ rx_cbdp->cbd_datlen = 0x0000;
+ rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I));
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_tx_irq
+ *
+ * Parse for tx timeout, control RX or USB reset/busy conditions
+ * Return -1 on timeout, -2 on fatal error, else return zero
+ */
+static int mpc8xx_udc_tx_irq (int ep)
+{
+ int i = 0;
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ if (mpc8xx_udc_handle_txerr ()) {
+ /* Timeout, controlling function must retry send */
+ return -1;
+ }
+ }
+
+ if (usbp->usber & (USB_E_RESET | USB_E_BSY)) {
+ /* Fatal, abandon TX transaction */
+ return -2;
+ }
+
+ if (usbp->usber & USB_E_RXB) {
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ if ((rx_cbd[i] == ep_ref[0].prx) || ep) {
+ return -2;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* mpc8xx_udc_ep_tx
+ *
+ * Transmit in a re-entrant fashion outbound USB packets.
+ * Implement retry/timeout mechanism described in USB specification
+ * Toggle DATA0/DATA1 pids as necessary
+ * Introduces non-standard tx_retry. The USB standard has no scope for slave
+ * devices to give up TX, however tx_retry stops us getting stuck in an endless
+ * TX loop.
+ */
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
+{
+ struct urb *urb = epi->tx_urb;
+ volatile cbd_t *tx_cbdp = 0;
+ unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
+ int ret = 0;
+
+ if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+
+ if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
+ mpc8xx_udc_flush_tx_fifo (ep);
+ usbp->usber |= USB_E_TXB;
+ };
+
+ while (tx_retry++ < 100) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* ignore timeout here */
+ } else if (ret == -2) {
+ /* Abandon TX */
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ while (tx_cbdp->cbd_sc & TX_BD_R) {
+ };
+ tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
+
+ pkt_len = urb->actual_length - epi->sent;
+
+ if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
+ pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+ }
+
+ for (x = 0; x < pkt_len; x++) {
+ *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) =
+ urb->buffer[epi->sent + x];
+ }
+ tx_cbdp->cbd_datlen = pkt_len;
+ tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid);
+ __asm__ ("eieio");
+
+#ifdef __SIMULATE_ERROR__
+ if (++err_poison_test == 2) {
+ err_poison_test = 0;
+ tx_cbdp->cbd_sc &= ~TX_BD_TC;
+ }
+#endif
+
+ usbp->uscom = (USCOM_STR | ep);
+
+ while (!(usbp->usber & USB_E_TXB)) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* TX timeout */
+ break;
+ } else if (ret == -2) {
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+ };
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ /* ACK must be present <= 18bit times from TX */
+ if (ret == -1) {
+ continue;
+ }
+
+ /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
+ epi->sent += pkt_len;
+ epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+ TOGGLE_TX_PID (ep_ref[ep].pid);
+
+ if (epi->sent >= epi->tx_urb->actual_length) {
+
+ epi->tx_urb->actual_length = 0;
+ epi->sent = 0;
+
+ if (ep_ref[ep].sc & EP_SEND_ZLP) {
+ ep_ref[ep].sc &= ~EP_SEND_ZLP;
+ } else {
+ return 0;
+ }
+ }
+ }
+
+ ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent,
+ epi->tx_urb->actual_length);
+
+ return -1;
+}
+
+/* mpc8xx_udc_dump_request
+ *
+ * Dump a control request to console
+ */
+static void mpc8xx_udc_dump_request (struct usb_device_request *request)
+{
+ DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x "
+ "wIndex:%04x wLength:%04x ?\n",
+ request->bmRequestType,
+ request->bRequest,
+ request->wValue, request->wIndex, request->wLength);
+
+ return;
+}
+
+/* mpc8xx_udc_ep0_rx_setup
+ *
+ * Decode received ep0 SETUP packet. return non-zero on error
+ */
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
+{
+ unsigned int x = 0;
+ struct urb *purb = ep_ref[0].urb;
+ struct usb_endpoint_instance *epi =
+ &udc_device->bus->endpoint_array[0];
+
+ for (; x < rx_cbdp->cbd_datlen; x++) {
+ *(((unsigned char *) &ep_ref[0].urb->device_request) + x) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if (ep0_recv_setup (purb)) {
+ mpc8xx_udc_dump_request (&purb->device_request);
+ return -1;
+ }
+
+ if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+
+ switch (purb->device_request.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ /* Send the Status OUT ZLP */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ /* Move to the addressed state */
+ usbp->usaddr = udc_device->address;
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_ADDRESSED);
+ return 0;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (!purb->device_request.wValue) {
+ /* Respond at default address */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_state_transition_down (udc_device->device_state,
+ STATE_ADDRESSED);
+ } else {
+ /* TODO: Support multiple configurations */
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_CONFIGURED);
+ for (x = 1; x < MAX_ENDPOINTS; x++) {
+ if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+ ep_ref[x].pid = TX_BD_PID_DATA0;
+ } else {
+ ep_ref[x].pid = RX_BD_PID_DATA0;
+ }
+ /* Set configuration must unstall endpoints */
+ usbp->usep[x] &= ~STALL_BITMASK;
+ }
+ }
+ break;
+ default:
+ /* CDC/Vendor specific */
+ break;
+ }
+
+ /* Send ZLP as ACK in Status OUT phase */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+
+ if (purb->actual_length) {
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ mpc8xx_udc_init_tx (epi, purb);
+
+ if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) {
+ ep_ref[0].sc |= EP_SEND_ZLP;
+ }
+
+ if (purb->device_request.wValue ==
+ USB_DESCRIPTOR_TYPE_DEVICE) {
+ if (le16_to_cpu (purb->device_request.wLength)
+ > purb->actual_length) {
+ /* Send EP0_MAX_PACKET_SIZE bytes
+ * unless correct size requested.
+ */
+ if (purb->actual_length > epi->tx_packetSize) {
+ purb->actual_length = epi->tx_packetSize;
+ }
+ }
+ }
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+ /* Corrupt SETUP packet? */
+ ERR ("Zero length data or SETUP with DATA-IN phase ?\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* mpc8xx_udc_init_tx
+ *
+ * Setup some basic parameters for a TX transaction
+ */
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb)
+{
+ epi->sent = 0;
+ epi->last = 0;
+ epi->tx_urb = tx_urb;
+}
+
+/* mpc8xx_udc_ep0_rx
+ *
+ * Receive ep0/control USB data. Parse and possibly send a response.
+ */
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp)
+{
+ if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) {
+
+ /* Unconditionally accept SETUP packets */
+ if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) {
+ mpc8xx_udc_stall (0);
+ }
+
+ } else {
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if ((rx_cbdp->cbd_datlen - 2)) {
+ /* SETUP with a DATA phase
+ * outside of SETUP packet.
+ * Reply with STALL.
+ */
+ mpc8xx_udc_stall (0);
+ }
+ }
+}
+
+/* mpc8xx_udc_epn_rx
+ *
+ * Receive some data from cbd into USB system urb data abstraction
+ * Upper layers should NAK if there is insufficient RX data space
+ */
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
+{
+ struct usb_endpoint_instance *epi = 0;
+ struct urb *urb = 0;
+ unsigned int x = 0;
+
+ if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) {
+ return 0;
+ }
+
+ /* USB 2.0 PDF section 8.6.4
+ * Discard data with invalid PID it is a resend.
+ */
+ if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) {
+ return 1;
+ }
+ TOGGLE_RX_PID (ep_ref[epid].pid);
+
+ epi = &udc_device->bus->endpoint_array[epid];
+ urb = epi->rcv_urb;
+
+ for (; x < (rx_cbdp->cbd_datlen - 2); x++) {
+ *((unsigned char *) (urb->buffer + urb->actual_length + x)) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ if (x) {
+ usbd_rcv_complete (epi, x, 0);
+ if (ep_ref[epid].urb->status == RECV_ERROR) {
+ DBG ("RX error unset NAK\n");
+ udc_unset_nak (epid);
+ }
+ }
+ return x;
+}
+
+/* mpc8xx_udc_clock_init
+ *
+ * Obtain a clock reference for Full Speed Signaling
+ */
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp)
+{
+
+#if defined(CFG_USB_EXTC_CLK)
+
+ /* This has been tested with a 48MHz crystal on CLK6 */
+ switch (CFG_USB_EXTC_CLK) {
+ case 1:
+ immr->im_ioport.iop_papar |= 0x0100;
+ immr->im_ioport.iop_padir &= ~0x0100;
+ cp->cp_sicr |= 0x24;
+ break;
+ case 2:
+ immr->im_ioport.iop_papar |= 0x0200;
+ immr->im_ioport.iop_padir &= ~0x0200;
+ cp->cp_sicr |= 0x2D;
+ break;
+ case 3:
+ immr->im_ioport.iop_papar |= 0x0400;
+ immr->im_ioport.iop_padir &= ~0x0400;
+ cp->cp_sicr |= 0x36;
+ break;
+ case 4:
+ immr->im_ioport.iop_papar |= 0x0800;
+ immr->im_ioport.iop_padir &= ~0x0800;
+ cp->cp_sicr |= 0x3F;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#elif defined(CFG_USB_BRGCLK)
+
+ /* This has been tested with brgclk == 50MHz */
+ DECLARE_GLOBAL_DATA_PTR;
+ int divisor = 0;
+
+ if (gd->cpu_clk < 48000000L) {
+ ERR ("brgclk is too slow for full-speed USB!\n");
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+ * but, can /probably/ live with close-ish alternative rates.
+ */
+ divisor = (gd->cpu_clk / 48000000L) - 1;
+ cp->cp_sicr &= ~0x0000003F;
+
+ switch (CFG_USB_BRGCLK) {
+ case 1:
+ cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr &= ~0x2F;
+ break;
+ case 2:
+ cp->cp_brgc2 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000009;
+ break;
+ case 3:
+ cp->cp_brgc3 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000012;
+ break;
+ case 4:
+ cp->cp_brgc4 = (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x0000001B;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#else
+#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#endif
+
+}
+
+/* mpc8xx_udc_cbd_attach
+ *
+ * attach a cbd to and endpoint
+ */
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
+{
+
+ if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT ||
+ (!tx_size && !rx_size)) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Attach CBD to appropiate Parameter RAM Endpoint data structure */
+ if (rx_size) {
+ endpoints[ep]->rbase = (u32) rx_cbd[rx_ct];
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_ct++;
+
+ if (!ep) {
+
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+
+ } else {
+ rx_ct += 2;
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+ }
+
+ /* Where we expect to RX data on this endpoint */
+ ep_ref[ep].prx = rx_cbd[rx_ct - 1];
+ } else {
+
+ ep_ref[ep].prx = 0;
+ endpoints[ep]->rbase = 0;
+ endpoints[ep]->rbptr = 0;
+ }
+
+ if (tx_size) {
+ endpoints[ep]->tbase = (u32) tx_cbd[tx_ct];
+ endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct];
+ tx_ct++;
+ } else {
+ endpoints[ep]->tbase = 0;
+ endpoints[ep]->tbptr = 0;
+ }
+
+ endpoints[ep]->tstate = 0;
+ endpoints[ep]->tbcnt = 0;
+ endpoints[ep]->mrblr = EP_MAX_PKT;
+ endpoints[ep]->rfcr = 0x18;
+ endpoints[ep]->tfcr = 0x18;
+ ep_ref[ep].sc |= EP_ATTACHED;
+
+ DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
+ ep, endpoints[ep]->rbase, endpoints[ep]->rbptr,
+ endpoints[ep]->tbase, endpoints[ep]->tbptr,
+ ep_ref[ep].prx);
+
+ return;
+}
+
+/* mpc8xx_udc_cbd_init
+ *
+ * Allocate space for a cbd and allocate TX/RX data space
+ */
+static void mpc8xx_udc_cbd_init (void)
+{
+ int i = 0;
+
+ for (; i < TX_RING_SIZE; i++) {
+ tx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+
+ tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
+ tx_cbd[i]->cbd_datlen = 0x0000;
+ }
+
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+ rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
+ rx_cbd[i]->cbd_datlen = 0x0000;
+
+ }
+
+ return;
+}
+
+/* mpc8xx_udc_endpoint_init
+ *
+ * Attach an endpoint to some dpram
+ */
+static void mpc8xx_udc_endpoint_init (void)
+{
+ int i = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ endpoints[i] = (usb_epb_t *)
+ mpc8xx_udc_alloc (sizeof (usb_epb_t), 32);
+ }
+}
+
+/* mpc8xx_udc_alloc
+ *
+ * Grab the address of some dpram
+ */
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
+{
+ u32 retaddr = address_base;
+
+ while (retaddr % alignment) {
+ retaddr++;
+ }
+ address_base += data_size;
+
+ return retaddr;
+}
+
+#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c
index 1d54a63..84bb936 100644
--- a/drivers/usbdcore_omap1510.c
+++ b/drivers/usbdcore_omap1510.c
@@ -1517,4 +1517,31 @@ void udc_startup_events (struct usb_device_instance *device)
udc_enable (device);
}
+/**
+ * udc_irq - do pseudo interrupts
+ */
+void udc_irq(void)
+{
+ /* Loop while we have interrupts.
+ * If we don't do this, the input chain
+ * polling delay is likely to miss
+ * host requests.
+ */
+ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
+ /* Handle any new IRQs */
+ omap1510_udc_irq ();
+ omap1510_udc_noniso_irq ();
+ }
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
+
+void udc_unset_nak (int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
#endif
diff --git a/drivers/usbtty.c b/drivers/usbtty.c
index ce4a12e..a3b5013 100644
--- a/drivers/usbtty.c
+++ b/drivers/usbtty.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -25,20 +28,42 @@
#include <circbuf.h>
#include <devices.h>
#include "usbtty.h"
+#include "usb_cdc_acm.h"
+#include "usbdescriptors.h"
+#include <config.h> /* If defined, override Linux identifiers with
+ * vendor specific ones */
#if 0
-#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#define TTYDBG(fmt,args...)\
+ serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
#else
#define TTYDBG(fmt,args...) do{}while(0)
#endif
-#if 0
-#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#if 1
+#define TTYERR(fmt,args...)\
+ serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\
+ __LINE__,##args)
#else
#define TTYERR(fmt,args...) do{}while(0)
#endif
/*
+ * Defines
+ */
+#define NUM_CONFIGS 1
+#define MAX_INTERFACES 2
+#define NUM_ENDPOINTS 3
+#define ACM_TX_ENDPOINT 3
+#define ACM_RX_ENDPOINT 2
+#define GSERIAL_TX_ENDPOINT 2
+#define GSERIAL_RX_ENDPOINT 1
+#define NUM_ACM_INTERFACES 2
+#define NUM_GSERIAL_INTERFACES 1
+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
+
+/*
* Buffers to hold input and output data
*/
#define USBTTY_BUFFER_SIZE 256
@@ -50,157 +75,336 @@ static circbuf_t usbtty_output;
* Instance variables
*/
static device_t usbttydev;
-static struct usb_device_instance device_instance[1];
-static struct usb_bus_instance bus_instance[1];
+static struct usb_device_instance device_instance[1];
+static struct usb_bus_instance bus_instance[1];
static struct usb_configuration_instance config_instance[NUM_CONFIGS];
-static struct usb_interface_instance interface_instance[NUM_INTERFACES];
-static struct usb_alternate_instance alternate_instance[NUM_INTERFACES];
-static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */
-
-/*
- * Static allocation of urbs
- */
-#define RECV_ENDPOINT 1
-#define TX_ENDPOINT 2
+static struct usb_interface_instance interface_instance[MAX_INTERFACES];
+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
+/* one extra for control endpoint */
+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
/*
* Global flag
*/
int usbtty_configured_flag = 0;
-
/*
* Serial number
*/
static char serial_number[16];
+
/*
- * Descriptors
+ * Descriptors, Strings, Local variables.
*/
+
+/* defined and used by usbdcore_ep0.c */
+extern struct usb_string_descriptor **usb_strings;
+
+/* Indicies, References */
+static unsigned short rx_endpoint = 0;
+static unsigned short tx_endpoint = 0;
+static unsigned short interface_count = 0;
+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
+
+/* USB Descriptor Strings */
static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
-static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)];
-
-static struct usb_string_descriptor *usbtty_string_table[] = {
- (struct usb_string_descriptor*)wstrLang,
- (struct usb_string_descriptor*)wstrManufacturer,
- (struct usb_string_descriptor*)wstrProduct,
- (struct usb_string_descriptor*)wstrSerial,
- (struct usb_string_descriptor*)wstrConfiguration,
- (struct usb_string_descriptor*)wstrInterface
-};
-extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */
+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+/* Standard USB Data Structures */
+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
+static struct usb_configuration_descriptor *configuration_descriptor = 0;
static struct usb_device_descriptor device_descriptor = {
- bLength: sizeof(struct usb_device_descriptor),
- bDescriptorType: USB_DT_DEVICE,
- bcdUSB: USB_BCD_VERSION,
- bDeviceClass: USBTTY_DEVICE_CLASS,
- bDeviceSubClass: USBTTY_DEVICE_SUBCLASS,
- bDeviceProtocol: USBTTY_DEVICE_PROTOCOL,
- bMaxPacketSize0: EP0_MAX_PACKET_SIZE,
- idVendor: CONFIG_USBD_VENDORID,
- idProduct: CONFIG_USBD_PRODUCTID,
- bcdDevice: USBTTY_BCD_DEVICE,
- iManufacturer: STR_MANUFACTURER,
- iProduct: STR_PRODUCT,
- iSerialNumber: STR_SERIAL,
- bNumConfigurations: NUM_CONFIGS
- };
-static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = {
- {
- bLength: sizeof(struct usb_configuration_descriptor),
- bDescriptorType: USB_DT_CONFIG,
- wTotalLength: (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) +
- (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) +
- (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS),
- bNumInterfaces: NUM_INTERFACES,
- bConfigurationValue: 1,
- iConfiguration: STR_CONFIG,
- bmAttributes: BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED,
- bMaxPower: USBTTY_MAXPOWER
- },
-};
-static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = {
- {
- bLength: sizeof(struct usb_interface_descriptor),
- bDescriptorType: USB_DT_INTERFACE,
- bInterfaceNumber: 0,
- bAlternateSetting: 0,
- bNumEndpoints: NUM_ENDPOINTS,
- bInterfaceClass: USBTTY_INTERFACE_CLASS,
- bInterfaceSubClass: USBTTY_INTERFACE_SUBCLASS,
- bInterfaceProtocol: USBTTY_INTERFACE_PROTOCOL,
- iInterface: STR_INTERFACE
- },
+ .bLength = sizeof(struct usb_device_descriptor),
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
+ .bDeviceSubClass = 0x00,
+ .bDeviceProtocol = 0x00,
+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
+ .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID),
+ .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE),
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIAL,
+ .bNumConfigurations = NUM_CONFIGS
};
-static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = {
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT,
- bmAttributes: USB_ENDPOINT_XFER_BULK,
- wMaxPacketSize: CONFIG_USBD_SERIAL_OUT_PKTSIZE,
- bInterval: 0
- },
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN,
- bmAttributes: USB_ENDPOINT_XFER_BULK,
- wMaxPacketSize: CONFIG_USBD_SERIAL_IN_PKTSIZE,
- bInterval: 0
- },
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN,
- bmAttributes: USB_ENDPOINT_XFER_INT,
- wMaxPacketSize: CONFIG_USBD_SERIAL_INT_PKTSIZE,
- bInterval: 0
- },
+
+
+/*
+ * Static CDC ACM specific descriptors
+ */
+
+struct acm_config_desc {
+ struct usb_configuration_descriptor configuration_desc;
+
+ /* Master Interface */
+ struct usb_interface_descriptor interface_desc;
+
+ struct usb_class_header_function_descriptor usb_class_header;
+ struct usb_class_call_management_descriptor usb_class_call_mgt;
+ struct usb_class_abstract_control_descriptor usb_class_acm;
+ struct usb_class_union_function_descriptor usb_class_union;
+ struct usb_endpoint_descriptor notification_endpoint;
+
+ /* Slave Interface */
+ struct usb_interface_descriptor data_class_interface;
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
+} __attribute__((packed));
+
+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
+ {
+ .configuration_desc ={
+ .bLength =
+ sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct acm_config_desc)),
+ .bNumInterfaces = NUM_ACM_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ /* Interface 1 */
+ .interface_desc = {
+ .bLength = sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0x01,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
+ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
+ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
+ .iInterface = STR_CTRL_INTERFACE,
+ },
+ .usb_class_header = {
+ .bFunctionLength =
+ sizeof(struct usb_class_header_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_HEADER,
+ .bcdCDC = cpu_to_le16(110),
+ },
+ .usb_class_call_mgt = {
+ .bFunctionLength =
+ sizeof(struct usb_class_call_management_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_CMF,
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
+ },
+ .usb_class_acm = {
+ .bFunctionLength =
+ sizeof(struct usb_class_abstract_control_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_ACMF,
+ .bmCapabilities = 0x00,
+ },
+ .usb_class_union = {
+ .bFunctionLength =
+ sizeof(struct usb_class_union_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_UF,
+ .bMasterInterface = 0x00,
+ .bSlaveInterface0 = 0x01,
+ },
+ .notification_endpoint = {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize
+ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+
+ /* Interface 2 */
+ .data_class_interface = {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0x01,
+ .bAlternateSetting = 0x00,
+ .bNumEndpoints = 0x02,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_DATA,
+ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE,
+ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE,
+ .iInterface = STR_DATA_INTERFACE,
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_OUT,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
};
-static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = {
- &(ep_descriptors[0]),
- &(ep_descriptors[1]),
- &(ep_descriptors[2]),
+
+static struct rs232_emu rs232_desc={
+ .dter = 115200,
+ .stop_bits = 0x00,
+ .parity = 0x00,
+ .data_bits = 0x08
};
-/* utility function for converting char* to wide string used by USB */
-static void str2wide (char *str, u16 * wide)
-{
- int i;
- for (i = 0; i < strlen (str) && str[i]; i++)
- wide[i] = (u16) str[i];
-}
+/*
+ * Static Generic Serial specific data
+ */
+
+
+struct gserial_config_desc {
+
+ struct usb_configuration_descriptor configuration_desc;
+ struct usb_interface_descriptor
+ interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
+
+} __attribute__((packed));
+
+static struct gserial_config_desc
+gserial_configuration_descriptors[NUM_CONFIGS] ={
+ {
+ .configuration_desc ={
+ .bLength = sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct gserial_config_desc)),
+ .bNumInterfaces = NUM_GSERIAL_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ .interface_desc = {
+ {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = NUM_ENDPOINTS,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
+ .bInterfaceSubClass =
+ COMMUNICATIONS_NO_SUBCLASS,
+ .bInterfaceProtocol =
+ COMMUNICATIONS_NO_PROTOCOL,
+ .iInterface = STR_DATA_INTERFACE
+ },
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
+ .bInterval= 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
+};
/*
- * Prototypes
+ * Static Function Prototypes
*/
+
static void usbtty_init_strings (void);
static void usbtty_init_instances (void);
static void usbtty_init_endpoints (void);
-
+static void usbtty_init_terminal_type(short type);
static void usbtty_event_handler (struct usb_device_instance *device,
- usb_device_event_t event, int data);
+ usb_device_event_t event, int data);
+static int usbtty_cdc_setup(struct usb_device_request *request,
+ struct urb *urb);
static int usbtty_configured (void);
-
static int write_buffer (circbuf_t * buf);
static int fill_buffer (circbuf_t * buf);
void usbtty_poll (void);
-static void pretend_interrupts (void);
+/* utility function for converting char* to wide string used by USB */
+static void str2wide (char *str, u16 * wide)
+{
+ int i;
+ for (i = 0; i < strlen (str) && str[i]; i++){
+ #if defined(__LITTLE_ENDIAN)
+ wide[i] = (u16) str[i];
+ #elif defined(__BIG_ENDIAN)
+ wide[i] = ((u16)(str[i])<<8);
+ #else
+ #error "__LITTLE_ENDIAN or __BIG_ENDIAN undefined"
+ #endif
+ }
+}
/*
* Test whether a character is in the RX buffer
*/
+
int usbtty_tstc (void)
{
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
+
+ /* If no input data exists, allow more RX to be accepted */
+ if(usbtty_input.size <= 0){
+ udc_unset_nak(endpoint->endpoint_address&0x03);
+ }
+
usbtty_poll ();
return (usbtty_input.size > 0);
}
@@ -210,15 +414,21 @@ int usbtty_tstc (void)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
+
int usbtty_getc (void)
{
char c;
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
while (usbtty_input.size <= 0) {
+ udc_unset_nak(endpoint->endpoint_address&0x03);
usbtty_poll ();
}
buf_pop (&usbtty_input, &c, 1);
+ udc_set_nak(endpoint->endpoint_address&0x03);
+
return c;
}
@@ -238,7 +448,6 @@ void usbtty_putc (const char c)
}
}
-
/* usbtty_puts() helper function for finding the next '\n' in a string */
static int next_nl_pos (const char *s)
{
@@ -252,8 +461,9 @@ static int next_nl_pos (const char *s)
}
/*
- * Output a string to the usb client port.
+ * Output a string to the usb client port - implementing flow control
*/
+
static void __usbtty_puts (const char *str, int len)
{
int maxlen = usbtty_output.totalsize;
@@ -261,22 +471,19 @@ static void __usbtty_puts (const char *str, int len)
/* break str into chunks < buffer size, if needed */
while (len > 0) {
- space = maxlen - usbtty_output.size;
+ usbtty_poll ();
+ space = maxlen - usbtty_output.size;
/* Empty buffer here, if needed, to ensure space... */
- if (space <= 0) {
+ if (space) {
write_buffer (&usbtty_output);
- space = maxlen - usbtty_output.size;
- if (space <= 0) {
- space = len; /* allow old data to be overwritten. */
- }
- }
- n = MIN (space, MIN (len, maxlen));
- buf_push (&usbtty_output, str, n);
+ n = MIN (space, MIN (len, maxlen));
+ buf_push (&usbtty_output, str, n);
- str += n;
- len -= n;
+ str += n;
+ len -= n;
+ }
}
}
@@ -313,8 +520,10 @@ int drv_usbtty_init (void)
{
int rc;
char * sn;
+ char * tt;
int snlen;
+ /* Ger seiral number */
if (!(sn = getenv("serial#"))) {
sn = "000000000000";
}
@@ -327,6 +536,14 @@ int drv_usbtty_init (void)
memcpy (serial_number, sn, snlen);
serial_number[snlen] = '\0';
+ /* Decide on which type of UDC device to be.
+ */
+
+ if(!(tt = getenv("usbtty"))) {
+ tt = "generic";
+ }
+ usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
+
/* prepare buffers... */
buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
@@ -337,7 +554,7 @@ int drv_usbtty_init (void)
usbtty_init_strings ();
usbtty_init_instances ();
- udc_startup_events (device_instance); /* Enable our device, initialize udc pointers */
+ udc_startup_events (device_instance);/* Enable dev, init udc pointers */
udc_connect (); /* Enable pullup for host detection */
usbtty_init_endpoints ();
@@ -362,30 +579,48 @@ static void usbtty_init_strings (void)
{
struct usb_string_descriptor *string;
+ usbtty_string_table[STR_LANG] =
+ (struct usb_string_descriptor*)wstrLang;
+
string = (struct usb_string_descriptor *) wstrManufacturer;
- string->bLength = sizeof (wstrManufacturer);
+ string->bLength = sizeof(wstrManufacturer);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
+ usbtty_string_table[STR_MANUFACTURER]=string;
+
string = (struct usb_string_descriptor *) wstrProduct;
- string->bLength = sizeof (wstrProduct);
+ string->bLength = sizeof(wstrProduct);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
+ usbtty_string_table[STR_PRODUCT]=string;
+
string = (struct usb_string_descriptor *) wstrSerial;
- string->bLength = 2 + 2*strlen(serial_number);
+ string->bLength = sizeof(serial_number);
string->bDescriptorType = USB_DT_STRING;
str2wide (serial_number, string->wData);
+ usbtty_string_table[STR_SERIAL]=string;
+
string = (struct usb_string_descriptor *) wstrConfiguration;
- string->bLength = sizeof (wstrConfiguration);
+ string->bLength = sizeof(wstrConfiguration);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
+ usbtty_string_table[STR_CONFIG]=string;
- string = (struct usb_string_descriptor *) wstrInterface;
- string->bLength = sizeof (wstrInterface);
+
+ string = (struct usb_string_descriptor *) wstrDataInterface;
+ string->bLength = sizeof(wstrDataInterface);
string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_INTERFACE_STR, string->wData);
+ str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_DATA_INTERFACE]=string;
+
+ string = (struct usb_string_descriptor *) wstrCtrlInterface;
+ string->bLength = sizeof(wstrCtrlInterface);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_CTRL_INTERFACE]=string;
/* Now, initialize the string table for ep0 handling */
usb_strings = usbtty_string_table;
@@ -400,6 +635,7 @@ static void usbtty_init_instances (void)
device_instance->device_state = STATE_INIT;
device_instance->device_descriptor = &device_descriptor;
device_instance->event = usbtty_event_handler;
+ device_instance->cdc_recv_setup = usbtty_cdc_setup;
device_instance->bus = bus_instance;
device_instance->configurations = NUM_CONFIGS;
device_instance->configuration_instance_array = config_instance;
@@ -415,8 +651,8 @@ static void usbtty_init_instances (void)
/* configuration instance */
memset (config_instance, 0,
sizeof (struct usb_configuration_instance));
- config_instance->interfaces = NUM_INTERFACES;
- config_instance->configuration_descriptor = config_descriptors;
+ config_instance->interfaces = interface_count;
+ config_instance->configuration_descriptor = configuration_descriptor;
config_instance->interface_instance_array = interface_instance;
/* interface instance */
@@ -447,17 +683,22 @@ static void usbtty_init_instances (void)
sizeof (struct usb_endpoint_instance));
endpoint_instance[i].endpoint_address =
- ep_descriptors[i - 1].bEndpointAddress;
+ ep_descriptor_ptrs[i - 1]->bEndpointAddress;
- endpoint_instance[i].rcv_packetSize =
- ep_descriptors[i - 1].wMaxPacketSize;
endpoint_instance[i].rcv_attributes =
- ep_descriptors[i - 1].bmAttributes;
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
+
+ endpoint_instance[i].rcv_packetSize =
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
+ endpoint_instance[i].tx_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
endpoint_instance[i].tx_packetSize =
- ep_descriptors[i - 1].wMaxPacketSize;
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
endpoint_instance[i].tx_attributes =
- ep_descriptors[i - 1].bmAttributes;
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
urb_link_init (&endpoint_instance[i].rcv);
urb_link_init (&endpoint_instance[i].rdy);
@@ -480,13 +721,79 @@ static void usbtty_init_endpoints (void)
int i;
bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
- for (i = 0; i <= NUM_ENDPOINTS; i++) {
+ for (i = 1; i <= NUM_ENDPOINTS; i++) {
udc_setup_ep (device_instance, i, &endpoint_instance[i]);
}
}
+/* usbtty_init_terminal_type
+ *
+ * Do some late binding for our device type.
+ */
+static void usbtty_init_terminal_type(short type)
+{
+ switch(type){
+ /* CDC ACM */
+ case 0:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &acm_configuration_descriptors[0].notification_endpoint;
+ ep_descriptor_ptrs[1] =
+ &acm_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[2] =
+ &acm_configuration_descriptors[0].data_endpoints[1];
+
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass =
+ COMMUNICATIONS_DEVICE_CLASS;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
+
+ /* Assign endpoint indices */
+ tx_endpoint = ACM_TX_ENDPOINT;
+ rx_endpoint = ACM_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &acm_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_ACM_INTERFACES;
+ break;
+
+ /* BULK IN/OUT & Default */
+ case 1:
+ default:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &gserial_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[1] =
+ &gserial_configuration_descriptors[0].data_endpoints[1];
+ ep_descriptor_ptrs[2] =
+ &gserial_configuration_descriptors[0].data_endpoints[2];
+
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass = 0xFF;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
+
+ /* Assign endpoint indices */
+ tx_endpoint = GSERIAL_TX_ENDPOINT;
+ rx_endpoint = GSERIAL_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &gserial_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_GSERIAL_INTERFACES;
+ break;
+ }
+}
-/*********************************************************************************/
+/******************************************************************************/
static struct urb *next_urb (struct usb_device_instance *device,
struct usb_endpoint_instance *endpoint)
@@ -526,27 +833,39 @@ static int write_buffer (circbuf_t * buf)
return 0;
}
- if (buf->size) {
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[tx_endpoint];
+ struct urb *current_urb = NULL;
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[TX_ENDPOINT];
- struct urb *current_urb = NULL;
+ current_urb = next_urb (device_instance, endpoint);
+ /* TX data still exists - send it now
+ */
+ if(endpoint->sent < current_urb->actual_length){
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
+ }
+
+ if (buf->size) {
char *dest;
int space_avail;
int popnum, popped;
int total = 0;
- /* Break buffer into urb sized pieces, and link each to the endpoint */
+ /* Break buffer into urb sized pieces,
+ * and link each to the endpoint
+ */
while (buf->size > 0) {
- current_urb = next_urb (device_instance, endpoint);
+
if (!current_urb) {
TTYERR ("current_urb is NULL, buf->size %d\n",
buf->size);
return total;
}
- dest = current_urb->buffer +
+ dest = (char*)current_urb->buffer +
current_urb->actual_length;
space_avail =
@@ -562,14 +881,19 @@ static int write_buffer (circbuf_t * buf)
current_urb->actual_length += popped;
total += popped;
- /* If endpoint->last == 0, then transfers have not started on this endpoint */
+ /* If endpoint->last == 0, then transfers have
+ * not started on this endpoint
+ */
if (endpoint->last == 0) {
- udc_endpoint_write (endpoint);
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
}
- } /* end while */
+ }/* end while */
return total;
- } /* end if tx_urb */
+ }
return 0;
}
@@ -577,18 +901,22 @@ static int write_buffer (circbuf_t * buf)
static int fill_buffer (circbuf_t * buf)
{
struct usb_endpoint_instance *endpoint =
- &endpoint_instance[RECV_ENDPOINT];
+ &endpoint_instance[rx_endpoint];
if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
- unsigned int nb = endpoint->rcv_urb->actual_length;
+ unsigned int nb = 0;
char *src = (char *) endpoint->rcv_urb->buffer;
+ unsigned int rx_avail = buf->totalsize - buf->size;
+
+ if(rx_avail >= endpoint->rcv_urb->actual_length){
- buf_push (buf, src, nb);
- endpoint->rcv_urb->actual_length = 0;
+ nb = endpoint->rcv_urb->actual_length;
+ buf_push (buf, src, nb);
+ endpoint->rcv_urb->actual_length = 0;
+ }
return nb;
}
-
return 0;
}
@@ -597,7 +925,7 @@ static int usbtty_configured (void)
return usbtty_configured_flag;
}
-/*********************************************************************************/
+/******************************************************************************/
static void usbtty_event_handler (struct usb_device_instance *device,
usb_device_event_t event, int data)
@@ -619,8 +947,34 @@ static void usbtty_event_handler (struct usb_device_instance *device,
}
}
-/*********************************************************************************/
+/******************************************************************************/
+
+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
+{
+ switch (request->bRequest){
+
+ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
+ break;
+ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
+ break;
+ case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits
+ * per character */
+ break;
+ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
+ break;
+ case ACM_GET_LINE_ENCODING : /* request DTE rate,
+ * stop/parity bits */
+ memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
+ urb->actual_length = sizeof(rs232_desc);
+
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+/******************************************************************************/
/*
* Since interrupt handling has not yet been implemented, we use this function
@@ -630,36 +984,29 @@ static void usbtty_event_handler (struct usb_device_instance *device,
void usbtty_poll (void)
{
/* New interrupts? */
- pretend_interrupts ();
+ udc_irq();
- /* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */
+ /* Write any output data to host buffer
+ * (do this before checking interrupts to avoid missing one)
+ */
if (usbtty_configured ()) {
write_buffer (&usbtty_output);
}
/* New interrupts? */
- pretend_interrupts ();
+ udc_irq();
- /* Check for new data from host.. (do this after checking interrupts to get latest data) */
+ /* Check for new data from host..
+ * (do this after checking interrupts to get latest data)
+ */
if (usbtty_configured ()) {
fill_buffer (&usbtty_input);
}
/* New interrupts? */
- pretend_interrupts ();
-}
+ udc_irq();
-static void pretend_interrupts (void)
-{
- /* Loop while we have interrupts.
- * If we don't do this, the input chain
- * polling delay is likely to miss
- * host requests.
- */
- while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
- /* Handle any new IRQs */
- omap1510_udc_irq ();
- omap1510_udc_noniso_irq ();
- }
}
+
+
#endif
diff --git a/drivers/usbtty.h b/drivers/usbtty.h
index 79c2fe5..8154e30 100644
--- a/drivers/usbtty.h
+++ b/drivers/usbtty.h
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -21,44 +24,47 @@
#ifndef __USB_TTY_H__
#define __USB_TTY_H__
-
#include "usbdcore.h"
+#if defined(CONFIG_PPC)
+#include "usbdcore_mpc8xx.h"
+#elif defined(CONFIG_ARM)
#include "usbdcore_omap1510.h"
+#endif
+#include <version_autogenerated.h>
-#define NUM_CONFIGS 1
-#define NUM_INTERFACES 1
-#define NUM_ENDPOINTS 3
+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
-#define EP0_MAX_PACKET_SIZE 64
+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
-#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
-#define CONFIG_USBD_INTERFACE_STR "Simple Serial Data Interface - Bulk Mode"
+#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
-#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2
-#define CONFIG_USBD_SERIAL_OUT_PKTSIZE 64
-#define CONFIG_USBD_SERIAL_IN_ENDPOINT 1
-#define CONFIG_USBD_SERIAL_IN_PKTSIZE 64
-#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5
-#define CONFIG_USBD_SERIAL_INT_PKTSIZE 16
-
+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
+#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
+#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
-#define USBTTY_DEVICE_SUBCLASS COMMUNICATIONS_NO_SUBCLASS
-#define USBTTY_DEVICE_PROTOCOL COMMUNICATIONS_NO_PROTOCOL
-
-#define USBTTY_INTERFACE_CLASS 0xFF /* Vendor Specific */
-#define USBTTY_INTERFACE_SUBCLASS 0x02
-#define USBTTY_INTERFACE_PROTOCOL 0x01
-#define USBTTY_BCD_DEVICE 0x0
-#define USBTTY_MAXPOWER 0x0
+#define USBTTY_BCD_DEVICE 0x00
+#define USBTTY_MAXPOWER 0x00
-#define STR_MANUFACTURER 1
-#define STR_PRODUCT 2
-#define STR_SERIAL 3
-#define STR_CONFIG 4
-#define STR_INTERFACE 5
+#define STR_LANG 0x00
+#define STR_MANUFACTURER 0x01
+#define STR_PRODUCT 0x02
+#define STR_SERIAL 0x03
+#define STR_CONFIG 0x04
+#define STR_DATA_INTERFACE 0x05
+#define STR_CTRL_INTERFACE 0x06
+#define STR_COUNT 0x07
#endif
diff --git a/include/_exports.h b/include/_exports.h
index da6e088..af43885 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -14,6 +14,9 @@ EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
+#ifdef CONFIG_HAS_UID
+EXPORT_FUNC(forceenv)
+#endif
EXPORT_FUNC(simple_strtoul)
EXPORT_FUNC(simple_strtol)
EXPORT_FUNC(strcmp)
diff --git a/include/asm-arm/arch-davinci/emac_defs.h b/include/asm-arm/arch-davinci/emac_defs.h
new file mode 100644
index 0000000..0e10116
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emac_defs.h
@@ -0,0 +1,311 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * dm644x_emac.h
+ *
+ * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM
+ *
+ * Copyright (C) 2005 Texas Instruments.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ----------------------------------------------------------------------------
+
+ * Modifications:
+ * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot.
+ *
+ */
+
+#ifndef _DM644X_EMAC_H_
+#define _DM644X_EMAC_H_
+
+#include <asm/arch/hardware.h>
+
+#define EMAC_BASE_ADDR (0x01c80000)
+#define EMAC_WRAPPER_BASE_ADDR (0x01c81000)
+#define EMAC_WRAPPER_RAM_ADDR (0x01c82000)
+#define EMAC_MDIO_BASE_ADDR (0x01c84000)
+
+/* MDIO module input frequency */
+#define EMAC_MDIO_BUS_FREQ 99000000 /* PLL/6 - 99 MHz */
+/* MDIO clock output frequency */
+#define EMAC_MDIO_CLOCK_FREQ 2000000 /* 2.0 MHz */
+
+/* Ethernet Min/Max packet size */
+#define EMAC_MIN_ETHERNET_PKT_SIZE 60
+#define EMAC_MAX_ETHERNET_PKT_SIZE 1518
+#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */
+
+/* Number of RX packet buffers
+ * NOTE: Only 1 buffer supported as of now
+ */
+#define EMAC_MAX_RX_BUFFERS 10
+
+
+/***********************************************
+ ******** Internally used macros ***************
+ ***********************************************/
+
+#define EMAC_CH_TX 1
+#define EMAC_CH_RX 0
+
+/* Each descriptor occupies 4 words, lets start RX desc's at 0 and
+ * reserve space for 64 descriptors max
+ */
+#define EMAC_RX_DESC_BASE 0x0
+#define EMAC_TX_DESC_BASE 0x1000
+
+/* EMAC Teardown value */
+#define EMAC_TEARDOWN_VALUE 0xfffffffc
+
+/* MII Status Register */
+#define MII_STATUS_REG 1
+
+/* Number of statistics registers */
+#define EMAC_NUM_STATS 36
+
+
+/* EMAC Descriptor */
+typedef volatile struct _emac_desc
+{
+ u_int32_t next; /* Pointer to next descriptor in chain */
+ u_int8_t *buffer; /* Pointer to data buffer */
+ u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */
+ u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */
+} emac_desc;
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT (0x80000000)
+#define EMAC_CPPI_EOP_BIT (0x40000000)
+#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000)
+#define EMAC_CPPI_EOQ_BIT (0x10000000)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000)
+#define EMAC_CPPI_PASS_CRC_BIT (0x04000000)
+
+#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000)
+
+#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20)
+#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1)
+
+#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000)
+#define EMAC_RXMBPENABLE_RXBROADEN (0x2000)
+
+
+#define MDIO_CONTROL_IDLE (0x80000000)
+#define MDIO_CONTROL_ENABLE (0x40000000)
+#define MDIO_CONTROL_FAULT_ENABLE (0x40000)
+#define MDIO_CONTROL_FAULT (0x80000)
+#define MDIO_USERACCESS0_GO (0x80000000)
+#define MDIO_USERACCESS0_WRITE_READ (0x0)
+#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000)
+#define MDIO_USERACCESS0_ACK (0x20000000)
+
+/* Ethernet MAC Registers Structure */
+typedef struct {
+ dv_reg TXIDVER;
+ dv_reg TXCONTROL;
+ dv_reg TXTEARDOWN;
+ u_int8_t RSVD0[4];
+ dv_reg RXIDVER;
+ dv_reg RXCONTROL;
+ dv_reg RXTEARDOWN;
+ u_int8_t RSVD1[100];
+ dv_reg TXINTSTATRAW;
+ dv_reg TXINTSTATMASKED;
+ dv_reg TXINTMASKSET;
+ dv_reg TXINTMASKCLEAR;
+ dv_reg MACINVECTOR;
+ u_int8_t RSVD2[12];
+ dv_reg RXINTSTATRAW;
+ dv_reg RXINTSTATMASKED;
+ dv_reg RXINTMASKSET;
+ dv_reg RXINTMASKCLEAR;
+ dv_reg MACINTSTATRAW;
+ dv_reg MACINTSTATMASKED;
+ dv_reg MACINTMASKSET;
+ dv_reg MACINTMASKCLEAR;
+ u_int8_t RSVD3[64];
+ dv_reg RXMBPENABLE;
+ dv_reg RXUNICASTSET;
+ dv_reg RXUNICASTCLEAR;
+ dv_reg RXMAXLEN;
+ dv_reg RXBUFFEROFFSET;
+ dv_reg RXFILTERLOWTHRESH;
+ u_int8_t RSVD4[8];
+ dv_reg RX0FLOWTHRESH;
+ dv_reg RX1FLOWTHRESH;
+ dv_reg RX2FLOWTHRESH;
+ dv_reg RX3FLOWTHRESH;
+ dv_reg RX4FLOWTHRESH;
+ dv_reg RX5FLOWTHRESH;
+ dv_reg RX6FLOWTHRESH;
+ dv_reg RX7FLOWTHRESH;
+ dv_reg RX0FREEBUFFER;
+ dv_reg RX1FREEBUFFER;
+ dv_reg RX2FREEBUFFER;
+ dv_reg RX3FREEBUFFER;
+ dv_reg RX4FREEBUFFER;
+ dv_reg RX5FREEBUFFER;
+ dv_reg RX6FREEBUFFER;
+ dv_reg RX7FREEBUFFER;
+ dv_reg MACCONTROL;
+ dv_reg MACSTATUS;
+ dv_reg EMCONTROL;
+ dv_reg FIFOCONTROL;
+ dv_reg MACCONFIG;
+ dv_reg SOFTRESET;
+ u_int8_t RSVD5[88];
+ dv_reg MACSRCADDRLO;
+ dv_reg MACSRCADDRHI;
+ dv_reg MACHASH1;
+ dv_reg MACHASH2;
+ dv_reg BOFFTEST;
+ dv_reg TPACETEST;
+ dv_reg RXPAUSE;
+ dv_reg TXPAUSE;
+ u_int8_t RSVD6[16];
+ dv_reg RXGOODFRAMES;
+ dv_reg RXBCASTFRAMES;
+ dv_reg RXMCASTFRAMES;
+ dv_reg RXPAUSEFRAMES;
+ dv_reg RXCRCERRORS;
+ dv_reg RXALIGNCODEERRORS;
+ dv_reg RXOVERSIZED;
+ dv_reg RXJABBER;
+ dv_reg RXUNDERSIZED;
+ dv_reg RXFRAGMENTS;
+ dv_reg RXFILTERED;
+ dv_reg RXQOSFILTERED;
+ dv_reg RXOCTETS;
+ dv_reg TXGOODFRAMES;
+ dv_reg TXBCASTFRAMES;
+ dv_reg TXMCASTFRAMES;
+ dv_reg TXPAUSEFRAMES;
+ dv_reg TXDEFERRED;
+ dv_reg TXCOLLISION;
+ dv_reg TXSINGLECOLL;
+ dv_reg TXMULTICOLL;
+ dv_reg TXEXCESSIVECOLL;
+ dv_reg TXLATECOLL;
+ dv_reg TXUNDERRUN;
+ dv_reg TXCARRIERSENSE;
+ dv_reg TXOCTETS;
+ dv_reg FRAME64;
+ dv_reg FRAME65T127;
+ dv_reg FRAME128T255;
+ dv_reg FRAME256T511;
+ dv_reg FRAME512T1023;
+ dv_reg FRAME1024TUP;
+ dv_reg NETOCTETS;
+ dv_reg RXSOFOVERRUNS;
+ dv_reg RXMOFOVERRUNS;
+ dv_reg RXDMAOVERRUNS;
+ u_int8_t RSVD7[624];
+ dv_reg MACADDRLO;
+ dv_reg MACADDRHI;
+ dv_reg MACINDEX;
+ u_int8_t RSVD8[244];
+ dv_reg TX0HDP;
+ dv_reg TX1HDP;
+ dv_reg TX2HDP;
+ dv_reg TX3HDP;
+ dv_reg TX4HDP;
+ dv_reg TX5HDP;
+ dv_reg TX6HDP;
+ dv_reg TX7HDP;
+ dv_reg RX0HDP;
+ dv_reg RX1HDP;
+ dv_reg RX2HDP;
+ dv_reg RX3HDP;
+ dv_reg RX4HDP;
+ dv_reg RX5HDP;
+ dv_reg RX6HDP;
+ dv_reg RX7HDP;
+ dv_reg TX0CP;
+ dv_reg TX1CP;
+ dv_reg TX2CP;
+ dv_reg TX3CP;
+ dv_reg TX4CP;
+ dv_reg TX5CP;
+ dv_reg TX6CP;
+ dv_reg TX7CP;
+ dv_reg RX0CP;
+ dv_reg RX1CP;
+ dv_reg RX2CP;
+ dv_reg RX3CP;
+ dv_reg RX4CP;
+ dv_reg RX5CP;
+ dv_reg RX6CP;
+ dv_reg RX7CP;
+} emac_regs;
+
+/* EMAC Wrapper Registers Structure */
+typedef struct {
+ u_int8_t RSVD0[4100];
+ dv_reg EWCTL;
+ dv_reg EWINTTCNT;
+} ewrap_regs;
+
+
+/* EMAC MDIO Registers Structure */
+typedef struct {
+ dv_reg VERSION;
+ dv_reg CONTROL;
+ dv_reg ALIVE;
+ dv_reg LINK;
+ dv_reg LINKINTRAW;
+ dv_reg LINKINTMASKED;
+ u_int8_t RSVD0[8];
+ dv_reg USERINTRAW;
+ dv_reg USERINTMASKED;
+ dv_reg USERINTMASKSET;
+ dv_reg USERINTMASKCLEAR;
+ u_int8_t RSVD1[80];
+ dv_reg USERACCESS0;
+ dv_reg USERPHYSEL0;
+ dv_reg USERACCESS1;
+ dv_reg USERPHYSEL1;
+} mdio_regs;
+
+int dm644x_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
+int dm644x_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
+
+typedef struct
+{
+ char name[64];
+ int (*init)(int phy_addr);
+ int (*is_phy_connected)(int phy_addr);
+ int (*get_link_speed)(int phy_addr);
+ int (*auto_negotiate)(int phy_addr);
+} phy_t;
+
+#define PHY_LXT972 (0x001378e2)
+int lxt972_is_phy_connected(int phy_addr);
+int lxt972_get_link_speed(int phy_addr);
+int lxt972_init_phy(int phy_addr);
+int lxt972_auto_negotiate(int phy_addr);
+
+#define PHY_DP83848 (0x20005c90)
+int dp83848_is_phy_connected(int phy_addr);
+int dp83848_get_link_speed(int phy_addr);
+int dp83848_init_phy(int phy_addr);
+int dp83848_auto_negotiate(int phy_addr);
+
+#endif /* _DM644X_EMAC_H_ */
diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h
new file mode 100644
index 0000000..646fc77
--- /dev/null
+++ b/include/asm-arm/arch-davinci/emif_defs.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _EMIF_DEFS_H_
+#define _EMIF_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+typedef struct {
+ dv_reg ERCSR;
+ dv_reg AWCCR;
+ dv_reg SDBCR;
+ dv_reg SDRCR;
+ dv_reg AB1CR;
+ dv_reg AB2CR;
+ dv_reg AB3CR;
+ dv_reg AB4CR;
+ dv_reg SDTIMR;
+ dv_reg DDRSR;
+ dv_reg DDRPHYCR;
+ dv_reg DDRPHYSR;
+ dv_reg TOTAR;
+ dv_reg TOTACTR;
+ dv_reg DDRPHYID_REV;
+ dv_reg SDSRETR;
+ dv_reg EIRR;
+ dv_reg EIMR;
+ dv_reg EIMSR;
+ dv_reg EIMCR;
+ dv_reg IOCTRLR;
+ dv_reg IOSTATR;
+ u_int8_t RSVD0[8];
+ dv_reg NANDFCR;
+ dv_reg NANDFSR;
+ u_int8_t RSVD1[8];
+ dv_reg NANDF1ECC;
+ dv_reg NANDF2ECC;
+ dv_reg NANDF3ECC;
+ dv_reg NANDF4ECC;
+} emif_registers;
+
+typedef emif_registers *emifregs;
+#endif
diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h
new file mode 100644
index 0000000..ebcdcfe
--- /dev/null
+++ b/include/asm-arm/arch-davinci/hardware.h
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Based on:
+ *
+ * -------------------------------------------------------------------------
+ *
+ * linux/include/asm-arm/arch-davinci/hardware.h
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <config.h>
+#include <asm/sizes.h>
+
+#define REG(addr) (*(volatile unsigned int *)(addr))
+#define REG_P(addr) ((volatile unsigned int *)(addr))
+
+typedef volatile unsigned int dv_reg;
+typedef volatile unsigned int * dv_reg_p;
+
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE (0x01c00000)
+#define DAVINCI_DMA_3PTC0_BASE (0x01c10000)
+#define DAVINCI_DMA_3PTC1_BASE (0x01c10400)
+#define DAVINCI_UART0_BASE (0x01c20000)
+#define DAVINCI_UART1_BASE (0x01c20400)
+#define DAVINCI_UART2_BASE (0x01c20800)
+#define DAVINCI_I2C_BASE (0x01c21000)
+#define DAVINCI_TIMER0_BASE (0x01c21400)
+#define DAVINCI_TIMER1_BASE (0x01c21800)
+#define DAVINCI_WDOG_BASE (0x01c21c00)
+#define DAVINCI_PWM0_BASE (0x01c22000)
+#define DAVINCI_PWM1_BASE (0x01c22400)
+#define DAVINCI_PWM2_BASE (0x01c22800)
+#define DAVINCI_SYSTEM_MODULE_BASE (0x01c40000)
+#define DAVINCI_PLL_CNTRL0_BASE (0x01c40800)
+#define DAVINCI_PLL_CNTRL1_BASE (0x01c40c00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01c41000)
+#define DAVINCI_SYSTEM_DFT_BASE (0x01c42000)
+#define DAVINCI_ARM_INTC_BASE (0x01c48000)
+#define DAVINCI_IEEE1394_BASE (0x01c60000)
+#define DAVINCI_USB_OTG_BASE (0x01c64000)
+#define DAVINCI_CFC_ATA_BASE (0x01c66000)
+#define DAVINCI_SPI_BASE (0x01c66800)
+#define DAVINCI_GPIO_BASE (0x01c67000)
+#define DAVINCI_UHPI_BASE (0x01c67800)
+#define DAVINCI_VPSS_REGS_BASE (0x01c70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01c80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01c81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01c82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01c84000)
+#define DAVINCI_IMCOP_BASE (0x01cc0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01e00000)
+#define DAVINCI_VLYNQ_BASE (0x01e01000)
+#define DAVINCI_MCBSP_BASE (0x01e02000)
+#define DAVINCI_MMC_SD_BASE (0x01e10000)
+#define DAVINCI_MS_BASE (0x01e20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE (0x0c000000)
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN 0
+#define DAVINCI_GPSC_DSPDOMAIN 1
+
+#define DAVINCI_LPSC_VPSSMSTR 0
+#define DAVINCI_LPSC_VPSSSLV 1
+#define DAVINCI_LPSC_TPCC 2
+#define DAVINCI_LPSC_TPTC0 3
+#define DAVINCI_LPSC_TPTC1 4
+#define DAVINCI_LPSC_EMAC 5
+#define DAVINCI_LPSC_EMAC_WRAPPER 6
+#define DAVINCI_LPSC_MDIO 7
+#define DAVINCI_LPSC_IEEE1394 8
+#define DAVINCI_LPSC_USB 9
+#define DAVINCI_LPSC_ATA 10
+#define DAVINCI_LPSC_VLYNQ 11
+#define DAVINCI_LPSC_UHPI 12
+#define DAVINCI_LPSC_DDR_EMIF 13
+#define DAVINCI_LPSC_AEMIF 14
+#define DAVINCI_LPSC_MMC_SD 15
+#define DAVINCI_LPSC_MEMSTICK 16
+#define DAVINCI_LPSC_McBSP 17
+#define DAVINCI_LPSC_I2C 18
+#define DAVINCI_LPSC_UART0 19
+#define DAVINCI_LPSC_UART1 20
+#define DAVINCI_LPSC_UART2 21
+#define DAVINCI_LPSC_SPI 22
+#define DAVINCI_LPSC_PWM0 23
+#define DAVINCI_LPSC_PWM1 24
+#define DAVINCI_LPSC_PWM2 25
+#define DAVINCI_LPSC_GPIO 26
+#define DAVINCI_LPSC_TIMER0 27
+#define DAVINCI_LPSC_TIMER1 28
+#define DAVINCI_LPSC_TIMER2 29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS 30
+#define DAVINCI_LPSC_ARM 31
+#define DAVINCI_LPSC_SCR2 32
+#define DAVINCI_LPSC_SCR3 33
+#define DAVINCI_LPSC_SCR4 34
+#define DAVINCI_LPSC_CROSSBAR 35
+#define DAVINCI_LPSC_CFG27 36
+#define DAVINCI_LPSC_CFG3 37
+#define DAVINCI_LPSC_CFG5 38
+#define DAVINCI_LPSC_GEM 39
+#define DAVINCI_LPSC_IMCOP 40
+
+/* Some PSC defines */
+#define PSC_CHP_SHRTSW (0x01c40038)
+#define PSC_GBLCTL (0x01c41010)
+#define PSC_EPCPR (0x01c41070)
+#define PSC_EPCCR (0x01c41078)
+#define PSC_PTCMD (0x01c41120)
+#define PSC_PTSTAT (0x01c41128)
+#define PSC_PDSTAT (0x01c41200)
+#define PSC_PDSTAT1 (0x01c41204)
+#define PSC_PDCTL (0x01c41300)
+#define PSC_PDCTL1 (0x01c41304)
+
+#define PSC_MDCTL_BASE (0x01c41a00)
+#define PSC_MDSTAT_BASE (0x01c41800)
+
+#define VDD3P3V_PWDN (0x01c40048)
+#define UART0_PWREMU_MGMT (0x01c20030)
+
+#define PSC_SILVER_BULLET (0x01c41a20)
+
+/* Some PLL defines */
+#define PLL1_PLLM (0x01c40910)
+#define PLL2_PLLM (0x01c40d10)
+#define PLL2_DIV2 (0x01c40d1c)
+
+/* Miscellania... */
+#define VBPR (0x20000020)
+#define PINMUX0 (0x01c40000)
+#define PINMUX1 (0x01c40004)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h
new file mode 100644
index 0000000..2e902e1
--- /dev/null
+++ b/include/asm-arm/arch-davinci/i2c_defs.h
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ *
+ * Some changes copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DAVINCI_I2C_H_
+#define _DAVINCI_I2C_H_
+
+#define I2C_WRITE 0
+#define I2C_READ 1
+
+#define I2C_BASE 0x01c21000
+
+#define I2C_OA (I2C_BASE + 0x00)
+#define I2C_IE (I2C_BASE + 0x04)
+#define I2C_STAT (I2C_BASE + 0x08)
+#define I2C_SCLL (I2C_BASE + 0x0c)
+#define I2C_SCLH (I2C_BASE + 0x10)
+#define I2C_CNT (I2C_BASE + 0x14)
+#define I2C_DRR (I2C_BASE + 0x18)
+#define I2C_SA (I2C_BASE + 0x1c)
+#define I2C_DXR (I2C_BASE + 0x20)
+#define I2C_CON (I2C_BASE + 0x24)
+#define I2C_IV (I2C_BASE + 0x28)
+#define I2C_PSC (I2C_BASE + 0x30)
+
+/* I2C masks */
+
+/* I2C Interrupt Enable Register (I2C_IE): */
+#define I2C_IE_SCD_IE (1 << 5) /* Stop condition detect interrupt enable */
+#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
+#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
+#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
+#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
+
+/* I2C Status Register (I2C_STAT): */
+
+#define I2C_STAT_BB (1 << 12) /* Bus busy */
+#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
+#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
+#define I2C_STAT_AAS (1 << 9) /* Address as slave */
+#define I2C_STAT_SCD (1 << 5) /* Stop condition detect */
+#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
+#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
+#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
+#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
+#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
+
+
+/* I2C Interrupt Code Register (I2C_INTCODE): */
+
+#define I2C_INTCODE_MASK 7
+#define I2C_INTCODE_NONE 0
+#define I2C_INTCODE_AL 1 /* Arbitration lost */
+#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
+#define I2C_INTCODE_ARDY 3 /* Register access ready */
+#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
+#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
+#define I2C_INTCODE_SCD 6 /* Stop condition detect */
+
+
+/* I2C Configuration Register (I2C_CON): */
+
+#define I2C_CON_EN (1 << 5) /* I2C module enable */
+#define I2C_CON_STB (1 << 4) /* Start byte mode (master mode only) */
+#define I2C_CON_MST (1 << 10) /* Master/slave mode */
+#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */
+#define I2C_CON_XA (1 << 8) /* Expand address */
+#define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */
+#define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */
+
+#define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */
+
+#endif
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h
new file mode 100644
index 0000000..619bd47
--- /dev/null
+++ b/include/asm-arm/arch-davinci/nand_defs.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Parts shamelesly stolen from Linux Kernel source tree.
+ *
+ * ------------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _NAND_DEFS_H_
+#define _NAND_DEFS_H_
+
+#include <asm/arch/hardware.h>
+
+#define MASK_CLE 0x10
+#define MASK_ALE 0x0a
+
+#define NAND_CE0CLE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x10))
+#define NAND_CE0ALE ((volatile u_int8_t *)(CFG_NAND_BASE + 0x0a))
+#define NAND_CE0DATA ((volatile u_int8_t *)CFG_NAND_BASE)
+
+typedef struct {
+ u_int32_t NRCSR;
+ u_int32_t AWCCR;
+ u_int8_t RSVD0[8];
+ u_int32_t AB1CR;
+ u_int32_t AB2CR;
+ u_int32_t AB3CR;
+ u_int32_t AB4CR;
+ u_int8_t RSVD1[32];
+ u_int32_t NIRR;
+ u_int32_t NIMR;
+ u_int32_t NIMSR;
+ u_int32_t NIMCR;
+ u_int8_t RSVD2[16];
+ u_int32_t NANDFCR;
+ u_int32_t NANDFSR;
+ u_int8_t RSVD3[8];
+ u_int32_t NANDF1ECC;
+ u_int32_t NANDF2ECC;
+ u_int32_t NANDF3ECC;
+ u_int32_t NANDF4ECC;
+ u_int8_t RSVD4[4];
+ u_int32_t IODFTECR;
+ u_int32_t IODFTGCR;
+ u_int8_t RSVD5[4];
+ u_int32_t IODFTMRLR;
+ u_int32_t IODFTMRMR;
+ u_int32_t IODFTMRMSBR;
+ u_int8_t RSVD6[20];
+ u_int32_t MODRNR;
+ u_int8_t RSVD7[76];
+ u_int32_t CE0DATA;
+ u_int32_t CE0ALE;
+ u_int32_t CE0CLE;
+ u_int8_t RSVD8[4];
+ u_int32_t CE1DATA;
+ u_int32_t CE1ALE;
+ u_int32_t CE1CLE;
+ u_int8_t RSVD9[4];
+ u_int32_t CE2DATA;
+ u_int32_t CE2ALE;
+ u_int32_t CE2CLE;
+ u_int8_t RSVD10[4];
+ u_int32_t CE3DATA;
+ u_int32_t CE3ALE;
+ u_int32_t CE3CLE;
+} nand_registers;
+
+typedef volatile nand_registers *nandregs;
+
+#define NAND_READ_START 0x00
+#define NAND_READ_END 0x30
+#define NAND_STATUS 0x70
+
+#ifdef CFG_NAND_HW_ECC
+#define NAND_Ecc_P1e (1 << 0)
+#define NAND_Ecc_P2e (1 << 1)
+#define NAND_Ecc_P4e (1 << 2)
+#define NAND_Ecc_P8e (1 << 3)
+#define NAND_Ecc_P16e (1 << 4)
+#define NAND_Ecc_P32e (1 << 5)
+#define NAND_Ecc_P64e (1 << 6)
+#define NAND_Ecc_P128e (1 << 7)
+#define NAND_Ecc_P256e (1 << 8)
+#define NAND_Ecc_P512e (1 << 9)
+#define NAND_Ecc_P1024e (1 << 10)
+#define NAND_Ecc_P2048e (1 << 11)
+
+#define NAND_Ecc_P1o (1 << 16)
+#define NAND_Ecc_P2o (1 << 17)
+#define NAND_Ecc_P4o (1 << 18)
+#define NAND_Ecc_P8o (1 << 19)
+#define NAND_Ecc_P16o (1 << 20)
+#define NAND_Ecc_P32o (1 << 21)
+#define NAND_Ecc_P64o (1 << 22)
+#define NAND_Ecc_P128o (1 << 23)
+#define NAND_Ecc_P256o (1 << 24)
+#define NAND_Ecc_P512o (1 << 25)
+#define NAND_Ecc_P1024o (1 << 26)
+#define NAND_Ecc_P2048o (1 << 27)
+
+#define TF(v) (v ? 1 : 0)
+
+#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0)
+#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1)
+#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2)
+#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3)
+#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4)
+#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5)
+#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6)
+#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7)
+
+#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4)
+#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5)
+#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6)
+#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7)
+
+#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0)
+#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1)
+#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2)
+#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3)
+#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4)
+#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5)
+#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6)
+#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7)
+
+#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4)
+#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5)
+#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6)
+#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7)
+
+#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
+#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ebda719..e8cb299 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -592,9 +592,11 @@ typedef void (*ExcpHndlr) (void) ;
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
/*
* USB Device Controller
*/
+#ifndef CONFIG_CPU_MONAHANS
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
@@ -749,11 +751,28 @@ typedef void (*ExcpHndlr) (void) ;
#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+#endif /* ! CONFIG_CPU_MONAHANS */
+
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/*
+ * USB Client Controller (incomplete)
+ */
+#define UDCCR __REG(0x40600000)
+#define UDCICR0 __REG(0x40600004)
+#define UDCCIR0 __REG(0x40600008)
+#define UDCISR0 __REG(0x4060000c)
+#define UDCSIR1 __REG(0x40600010)
+#define UDCFNR __REG(0x40600014)
+#define UDCOTGICR __REG(0x40600018)
+#define UDCOTGISR __REG(0x4060001c)
+#define UP2OCR __REG(0x40600020)
+#define UP3OCR __REG(0x40600024)
-#if defined(CONFIG_PXA27X)
/*
* USB Host Controller
*/
+#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */
#define UHCREV __REG(0x4C000000)
#define UHCHCON __REG(0x4C000004)
#define UHCCOMS __REG(0x4C000008)
diff --git a/include/common.h b/include/common.h
index ac29d3a..27a660a 100644
--- a/include/common.h
+++ b/include/common.h
@@ -241,6 +241,9 @@ int saveenv (void);
void inline setenv (char *, char *);
#else
void setenv (char *, char *);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *, char *);
+#endif
#endif /* CONFIG_PPC */
#ifdef CONFIG_ARM
# include <asm/mach-types.h>
@@ -526,6 +529,8 @@ void cpu_init_f (void);
int cpu_init_r (void);
#if defined(CONFIG_8260)
int prt_8260_rsr (void);
+#elif defined(CONFIG_MPC83XX)
+int prt_83xx_rsr (void);
#endif
/* $(CPU)/interrupts.c */
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
new file mode 100644
index 0000000..a4f7f9a
--- /dev/null
+++ b/include/configs/AdderUSB.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 CodeHermit.
+ * Bryan O'Donoghue <bodonoghue@codehermit.ie>
+ *
+ * Provides support for USB console on the Analogue & Micro Adder87x
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ADDERUSB__
+#define __ADDERUSB__
+
+/* Include the board port */
+#include "Adder.h"
+
+#define CONFIG_USB_DEVICE /* Include UDC driver */
+#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */
+#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */
+#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */
+#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */
+
+/* If you have a USB-IF assigned VendorID then you may wish to define
+ * your own vendor specific values either in BoardName.h or directly in
+ * usbd_vendor_info.h
+ */
+
+/*
+#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie"
+#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot"
+#define CONFIG_USBD_VENDORID 0xFFFF
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE
+*/
+
+#endif /* __ADDERUSB_H__ */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index cc902c8..1a7167b 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -84,10 +84,15 @@
#define CONFIG_ISO_PARTITION
/* USB */
-#if 1
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
-#endif
+#define CFG_OHCI_BE_CONTROLLER
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
new file mode 100644
index 0000000..376973b
--- /dev/null
+++ b/include/configs/MPC8323ERDB.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_QE 1 /* Has QE */
+#define CONFIG_MPC83XX 1 /* MPC83xx family */
+#define CONFIG_MPC832X 1 /* MPC832x CPU specific */
+
+#define CONFIG_PCI 1
+#define CONFIG_83XX_GENERIC_PCI 1
+
+/*
+ * System Clock Setup
+ */
+#define CONFIG_83XX_CLKIN 66666667 /* in Hz */
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_2X1 |\
+ HRCWL_VCO_1X2 |\
+ HRCWL_CSB_TO_CLKIN_2X1 |\
+ HRCWL_CORE_TO_CSB_2_5X1 |\
+ HRCWL_CE_PLL_VCO_DIV_2 |\
+ HRCWL_CE_PLL_DIV_1X1 |\
+ HRCWL_CE_TO_PLL_1X3)
+
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LALE_NORMAL)
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRL 0x00000000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDRCDR 0x73000002 /* DDR II voltage is 1.8V */
+
+#undef CONFIG_SPD_EEPROM
+#if defined(CONFIG_SPD_EEPROM)
+/* Determine DDR configuration from I2C interface
+ */
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR SODIMM */
+#else
+/* Manually set up DDR parameters
+ */
+#define CFG_DDR_SIZE 64 /* MB */
+#define CFG_DDR_CS0_CONFIG 0x80840101
+#define CFG_DDR_TIMING_0 0x00220802
+#define CFG_DDR_TIMING_1 0x3935d322
+#define CFG_DDR_TIMING_2 0x0f9048ca
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_CLK_CNTL 0x02000000
+#define CFG_DDR_MODE 0x44400232
+#define CFG_DDR_MODE2 0x8000c000
+#define CFG_DDR_INTERVAL 0x03200064
+#define CFG_DDR_CS0_BNDS 0x00000003
+#define CFG_DDR_SDRAM_CFG 0x43080000
+#define CFG_DDR_SDRAM_CFG2 0x00401000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00030000 /* memtest region */
+#define CFG_MEMTEST_END 0x03f00000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_2)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 16 /* FLASH size is 16M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM 0xfe006ff7 /* 16MB Flash size */
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+
+/*
+ * SDRAM on the Local Bus
+ */
+#undef CFG_LB_SDRAM /* The board has not SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+#define CFG_LBC_SDRAM_BASE 0xF0000000 /* SDRAM base address */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM CFG_LBC_SDRAM_BASE
+#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64MB */
+
+/*local bus BR2, OR2 definition for SDRAM if soldered on the EPB board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ * CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM 0xf0001861 /*Port size=32bit, MSEL=SDRAM */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ * 64MB mask for AM, OR2[0:7] = 1111 1100
+ * XAM, OR2[17:18] = 11
+ * 9 columns OR2[19-21] = 010
+ * 13 rows OR2[23-25] = 100
+ * EAD set for extra time OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
+ */
+
+#define CFG_OR2_PRELIM 0xfc006901
+
+#define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON 0x0063b723
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5 ( CFG_LBC_LSDMR_COMMON \
+ | CFG_LBC_LSDMR_OP_NORMAL)
+
+#endif
+
+/*
+ * Windows to access PIB via local bus
+ */
+#define CFG_LBLAWBAR3_PRELIM 0xf8008000 /* windows base 0xf8008000 */
+#define CFG_LBLAWAR3_PRELIM 0x8000000f /* windows size 64KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,8323@0"
+#define OF_SOC "soc8323@e0000000"
+#define OF_QE "qe@e0100000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_MMIO_BASE 0x90000000
+#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI1_IO_BASE 0xd0000000
+#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
+#define CFG_PCI1_IO_SIZE 0x04000000 /* 64M */
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+
+#endif /* CONFIG_PCI */
+
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#define CONFIG_ETHPRIME "Freescale GETH"
+
+#define CONFIG_UEC_ETH1 /* ETH3 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM 2 /* UCC3 */
+#define CFG_UEC1_RX_CLK QE_CLK9
+#define CFG_UEC1_TX_CLK QE_CLK10
+#define CFG_UEC1_ETH_TYPE FAST_ETH
+#define CFG_UEC1_PHY_ADDR 4
+#define CFG_UEC1_INTERFACE_MODE ENET_100_MII
+#endif
+
+#define CONFIG_UEC_ETH2 /* ETH4 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM 1 /* UCC2 */
+#define CFG_UEC2_RX_CLK QE_CLK16
+#define CFG_UEC2_TX_CLK QE_CLK3
+#define CFG_UEC2_ETH_TYPE FAST_ETH
+#define CFG_UEC2_PHY_ADDR 0
+#define CFG_UEC2_INTERFACE_MODE ENET_100_MII
+#endif
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ASKENV
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if (CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 16384
+#define CFG_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+/* IMMRBAR & PCI IO: cache-inhibit and guarded */
+#define CFG_IBAT1L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT1U (CFG_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U CFG_IBAT2U
+
+#define CFG_IBAT3L (0)
+#define CFG_IBAT3U (0)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT4L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT4U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT4L CFG_IBAT4L
+#define CFG_DBAT4U CFG_IBAT4U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT5L (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT5U (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT6L (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#else
+#define CFG_IBAT5L (0)
+#define CFG_IBAT5U (0)
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#endif
+
+/* Nothing in BAT7 */
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ETHADDR 00:04:9f:ef:03:01
+#define CONFIG_HAS_ETH1 /* add support for "eth1addr" */
+#define CONFIG_ETH1ADDR 00:04:9f:ef:03:02
+
+#define CONFIG_IPADDR 10.0.0.2
+#define CONFIG_SERVERIP 10.0.0.1
+#define CONFIG_GATEWAYIP 10.0.0.1
+#define CONFIG_NETMASK 255.0.0.0
+#define CONFIG_NETDEV eth1
+
+#define CONFIG_HOSTNAME mpc8323erdb
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_RAMDISKFILE rootfs.ext2.gz.uboot
+#define CONFIG_BOOTFILE uImage
+#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
+#define CONFIG_FDTFILE mpc832x_rdb.dtb
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftp $loadaddr $uboot;" \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=" MK_STR(CONFIG_RAMDISKFILE) "\0" \
+ "console=ttyS0\0" \
+ "setbootargs=setenv bootargs " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
+ "setipargs=setenv bootargs nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "root=$rootdev rw console=$console,$baudrate $othbootargs\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv rootdev /dev/nfs;" \
+ "run setbootargs;" \
+ "run setipargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv rootdev /dev/ram;" \
+ "run setbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index 121ff06..44649d0 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -289,6 +289,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+#define CONFIG_CONSOLE ttyS0
#define CONFIG_BAUDRATE 115200
#define CFG_NS16550_COM1 (CFG_IMMR + 0x4500)
@@ -408,6 +409,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH /* Flash is not usable now */
+ #undef CFG_FLASH_CFI_DRIVER
#define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
#define CFG_ENV_SIZE 0x2000
@@ -450,9 +452,7 @@ boards, we say we have two, but don't display a message if we find only one. */
#define CONFIG_CMD_I2C
#endif
-
/* Watchdog */
-
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*
@@ -673,9 +673,10 @@ boards, we say we have two, but don't display a message if we find only one. */
" ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \
MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \
MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \
- " console=ttyS0," MK_STR(CONFIG_BAUDRATE)
+ " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE)
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=" MK_STR(CONFIG_CONSOLE) "\0" \
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 888af53..64dcbd0 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -338,6 +338,17 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
+/************************************************************
+ * USB support
+ ************************************************************/
+#define CONFIG_PCI_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_USB_KEYBOARD 1
+#define CFG_DEVICE_DEREGISTER
+#define CFG_USB_EVENT_POLL 1
+#define CFG_USB_OHCI_SLOT_NAME "ohci_pci"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#if !defined(CONFIG_PCI_PNP)
#define PCI_ENET0_IOADDR 0xe0000000
#define PCI_ENET0_MEMADDR 0xe0000000
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 63d77e2..8360d8c 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -130,8 +130,18 @@
/* USB */
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
+#else
+#define ADD_USB_CMD 0
#endif
#ifndef CONFIG_CAM5200
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index c3efb7b..661712b 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -28,9 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define DEBUG
-#undef DEBUG
-
/*
* High Level Configuration Options
*/
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
new file mode 100644
index 0000000..8ecd059
--- /dev/null
+++ b/include/configs/davinci_dvevm.h
@@ -0,0 +1,214 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define DV_EVM
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */
+#define DDR_8BANKS /* 8-bank DDR2 (256MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#ifdef CFG_NAND_SMALLPAGE
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#else
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#endif
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x10000 /* 64KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*3)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2050000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h
new file mode 100644
index 0000000..96c9a30
--- /dev/null
+++ b/include/configs/davinci_schmoogie.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SCHMOOGIE
+#define CFG_NAND_LARGEPAGE
+#define CFG_USE_NAND
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 256*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 2048 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_128K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+/*=====================*/
+/* Board related stuff */
+/*=====================*/
+#define CONFIG_RTC_DS1307 /* RTC chip on SCHMOOGIE */
+#define CFG_I2C_RTC_ADDR 0x6f /* RTC chip I2C address */
+#define CONFIG_HAS_UID
+#define CONFIG_UID_DS28CM00 /* Unique ID on SCHMOOGIE */
+#define CFG_UID_ADDR 0x50 /* UID chip I2C address */
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NAND
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h
new file mode 100644
index 0000000..de8c4fa
--- /dev/null
+++ b/include/configs/davinci_sonata.h
@@ -0,0 +1,209 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/*
+ * Define this to make U-Boot skip low level initialization when loaded
+ * by initial bootloader. Not required by NAND U-Boot version but IS
+ * required for a NOR version used to burn the real NOR U-Boot into
+ * NOR Flash. NAND and NOR support for DaVinci chips is mutually exclusive
+ * so it is NOT possible to build a U-Boot with both NAND and NOR routines.
+ * NOR U-Boot is loaded directly from Flash so it must perform all the
+ * low level initialization itself. NAND version is loaded by an initial
+ * bootloader (UBL in TI-ese) that performs such an initialization so it's
+ * skipped in NAND version. The third DaVinci boot mode loads a bootloader
+ * via UART0 and that bootloader in turn loads and runs U-Boot (or whatever)
+ * performing low level init prior to loading. All that means we can NOT use
+ * NAND version to put U-Boot into NOR because it doesn't have NOR support and
+ * we can NOT use NOR version because it performs low level initialization
+ * effectively destroying itself in DDR memory. That's why a separate NOR
+ * version with this define is needed. It is loaded via UART, then one uses
+ * it to somehow download a proper NOR version built WITHOUT this define to
+ * RAM (tftp?) and burn it to NOR Flash. I would be probably able to squeeze
+ * NOR support into the initial bootloader so it won't be needed but DaVinci
+ * static RAM might be too small for this (I have something like 2Kbytes left
+ * as of now, without NOR support) so this might've not happened...
+ *
+#define CONFIG_NOR_UART_BOOT
+ */
+
+/*=======*/
+/* Board */
+/*=======*/
+#define SONATA_BOARD
+#define CFG_NAND_SMALLPAGE
+#define CFG_USE_NOR
+/*===================*/
+/* SoC Configuration */
+/*===================*/
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ 297000000 /* Arm Clock frequency */
+#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */
+#define CFG_HZ 1000
+/*====================================================*/
+/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
+/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
+/*====================================================*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS 6
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20
+/*=============*/
+/* Memory Info */
+/*=============*/
+#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */
+#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */
+#define CFG_MEMTEST_START 0x80000000 /* memtest start address */
+#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+#define DDR_4BANKS /* 4-bank DDR2 (128MB) */
+/*====================*/
+/* Serial Driver info */
+/*====================*/
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */
+#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */
+#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+/*===================*/
+/* I2C Configuration */
+/*===================*/
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED 80000 /* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+/*==================================*/
+/* Network & Ethernet Configuration */
+/*==================================*/
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+/*=====================*/
+/* Flash & Environment */
+/*=====================*/
+#ifdef CFG_USE_NAND
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CFG_ENV_SECT_SIZE 512 /* Env sector Size */
+#define CFG_ENV_SIZE SZ_16K
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#define CFG_NAND_BASE 0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#define CFG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define DEF_BOOTM ""
+#elif defined(CFG_USE_NOR)
+#ifdef CONFIG_NOR_UART_BOOT
+#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */
+#else
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#endif
+#define CFG_ENV_IS_IN_FLASH
+#undef CFG_NO_FLASH
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size AMD Flash */
+#define CFG_ENV_OFFSET (CFG_FLASH_SECT_SZ*2)
+#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */
+#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */
+#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */
+#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ)
+#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */
+#endif
+/*==============================*/
+/* U-Boot general configuration */
+/*==============================*/
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#undef CONFIG_BOOTDELAY
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/*===================*/
+/* Linux Information */
+/*===================*/
+#define LINUX_BOOT_PARAM_ADDR 0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=56M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTCOMMAND "setenv setboot setenv bootargs \\$(bootargs) video=dm64xxfb:output=\\$(videostd);run setboot; bootm 0x2060000"
+/*=================*/
+/* U-Boot commands */
+/*=================*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CFG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#elif defined(CFG_USE_NOR)
+#define CONFIG_CMD_JFFS2
+#else
+#error "Either CFG_USE_NAND or CFG_USE_NOR _MUST_ be defined !!!"
+#endif
+/*=======================*/
+/* KGDB support (if any) */
+/*=======================*/
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index dbfe7a7..09667ed 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -118,6 +118,18 @@
#endif
+/* USB */
+#define CONFIG_USB_OHCI_NEW 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_DOS_PARTITION 1
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE
+#define CFG_USB_OHCI_SLOT_NAME "delta"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
+
+#define LITTLEENDIAN 1 /* used by usb_ohci.c */
#define CONFIG_BOOTDELAY -1
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 8d6f261..ea5a44b 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -101,12 +101,18 @@
#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_KEYBOARD 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
#define CONFIG_AT91C_PQFP_UHPBUG 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME "at91rm9200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#undef CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
@@ -123,7 +129,6 @@
#define CONFIG_BOOTDELAY 3
-
#if !defined(CONFIG_HARD_I2C)
#define CONFIG_TIMESTAMP
#endif
@@ -173,7 +178,7 @@
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
#define CFG_MEMTEST_START PHYS_SDRAM
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 52bcbfc..dbccea2 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -80,10 +80,17 @@
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
/* USB stuff */
-#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_OHCI_NEW 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+
+#define CFG_USB_OHCI_REGS_BASE 0x14200000
+#define CFG_USB_OHCI_SLOT_NAME "s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
/*
* Size of malloc() pool
*/
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index dd6d9ac..6a5b7f1 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -233,8 +233,15 @@
#ifdef CONFIG_440EP
/* USB */
-#define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
+#define CFG_OHCI_BE_CONTROLLER
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000)
+#define CFG_USB_OHCI_SLOT_NAME "ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
diff --git a/include/da9030.h b/include/da9030.h
index 41108b9..3e3b202 100644
--- a/include/da9030.h
+++ b/include/da9030.h
@@ -104,3 +104,15 @@
#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
#define SYS_CONTROL_A_WATCHDOG (1<<7)
+
+#define MISC_CONTROLB_USB_INT_RISING (1<<2)
+#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
+
+#define USB_PUMP_USBVE (1<<0)
+#define USB_PUMP_USBVEP (1<<1)
+#define USB_PUMP_SRP_DETECT (1<<2)
+#define USB_PUMP_SESSION_VALID (1<<3)
+#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
+#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
+#define USB_PUMP_EN_USBVE (1<<6)
+#define USB_PUMP_EN_USBVEP (1<<7)
diff --git a/include/asm-avr32/div64.h b/include/div64.h
index 2e0ba83..2e0ba83 100644
--- a/include/asm-avr32/div64.h
+++ b/include/div64.h
diff --git a/include/dp83848.h b/include/dp83848.h
new file mode 100644
index 0000000..274bc4c
--- /dev/null
+++ b/include/dp83848.h
@@ -0,0 +1,88 @@
+/*
+ * DP83848 ethernet Physical layer
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
+
+#define DP83848_CTL_REG 0x0 /* Basic Mode Control Reg */
+#define DP83848_STAT_REG 0x1 /* Basic Mode Status Reg */
+#define DP83848_PHYID1_REG 0x2 /* PHY Idendifier Reg 1 */
+#define DP83848_PHYID2_REG 0x3 /* PHY Idendifier Reg 2 */
+#define DP83848_ANA_REG 0x4 /* Auto_Neg Advt Reg */
+#define DP83848_ANLPA_REG 0x5 /* Auto_neg Link Partner Ability Reg */
+#define DP83848_ANE_REG 0x6 /* Auto-neg Expansion Reg */
+#define DP83848_PHY_STAT_REG 0x10 /* PHY Status Register */
+#define DP83848_PHY_INTR_CTRL_REG 0x11 /* PHY Interrupt Control Register */
+#define DP83848_PHY_CTRL_REG 0x19 /* PHY Status Register */
+
+/*--Bit definitions: DP83848_CTL_REG */
+#define DP83848_RESET (1 << 15) /* 1= S/W Reset */
+#define DP83848_LOOPBACK (1 << 14) /* 1=loopback Enabled */
+#define DP83848_SPEED_SELECT (1 << 13)
+#define DP83848_AUTONEG (1 << 12)
+#define DP83848_POWER_DOWN (1 << 11)
+#define DP83848_ISOLATE (1 << 10)
+#define DP83848_RESTART_AUTONEG (1 << 9)
+#define DP83848_DUPLEX_MODE (1 << 8)
+#define DP83848_COLLISION_TEST (1 << 7)
+
+/*--Bit definitions: DP83848_STAT_REG */
+#define DP83848_100BASE_T4 (1 << 15)
+#define DP83848_100BASE_TX_FD (1 << 14)
+#define DP83848_100BASE_TX_HD (1 << 13)
+#define DP83848_10BASE_T_FD (1 << 12)
+#define DP83848_10BASE_T_HD (1 << 11)
+#define DP83848_MF_PREAMB_SUPPR (1 << 6)
+#define DP83848_AUTONEG_COMP (1 << 5)
+#define DP83848_RMT_FAULT (1 << 4)
+#define DP83848_AUTONEG_ABILITY (1 << 3)
+#define DP83848_LINK_STATUS (1 << 2)
+#define DP83848_JABBER_DETECT (1 << 1)
+#define DP83848_EXTEND_CAPAB (1 << 0)
+
+/*--definitions: DP83848_PHYID1 */
+#define DP83848_PHYID1_OUI 0x2000
+#define DP83848_PHYID2_OUI 0x5c90
+
+/*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
+#define DP83848_NP (1 << 15)
+#define DP83848_ACK (1 << 14)
+#define DP83848_RF (1 << 13)
+#define DP83848_PAUSE (1 << 10)
+#define DP83848_T4 (1 << 9)
+#define DP83848_TX_FDX (1 << 8)
+#define DP83848_TX_HDX (1 << 7)
+#define DP83848_10_FDX (1 << 6)
+#define DP83848_10_HDX (1 << 5)
+#define DP83848_AN_IEEE_802_3 0x0001
+
+/*--Bit definitions: DP83848_ANER */
+#define DP83848_PDF (1 << 4)
+#define DP83848_LP_NP_ABLE (1 << 3)
+#define DP83848_NP_ABLE (1 << 2)
+#define DP83848_PAGE_RX (1 << 1)
+#define DP83848_LP_AN_ABLE (1 << 0)
+
+/*--Bit definitions: DP83848_PHY_STAT */
+#define DP83848_RX_ERR_LATCH (1 << 13)
+#define DP83848_POLARITY_STAT (1 << 12)
+#define DP83848_FALSE_CAR_SENSE (1 << 11)
+#define DP83848_SIG_DETECT (1 << 10)
+#define DP83848_DESCRAM_LOCK (1 << 9)
+#define DP83848_PAGE_RCV (1 << 8)
+#define DP83848_PHY_RMT_FAULT (1 << 6)
+#define DP83848_JABBER (1 << 5)
+#define DP83848_AUTONEG_COMPLETE (1 << 4)
+#define DP83848_LOOPBACK_STAT (1 << 3)
+#define DP83848_DUPLEX (1 << 2)
+#define DP83848_SPEED (1 << 1)
+#define DP83848_LINK (1 << 0)
diff --git a/include/exports.h b/include/exports.h
index 0516da9..d6512cb 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -25,6 +25,9 @@ char *getenv (char *name);
void setenv (char *varname, char *varvalue);
long simple_strtol(const char *cp,char **endp,unsigned int base);
int strcmp(const char * cs,const char * ct);
+#ifdef CONFIG_HAS_UID
+void forceenv (char *varname, char *varvalue);
+#endif
#if defined(CONFIG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 336c0ac..829dbf9 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -86,6 +86,8 @@
#define SPR_8360_REV12 0x80490012
#define SPR_8360E_REV20 0x80480020
#define SPR_8360_REV20 0x80490020
+#define SPR_8360E_REV21 0x80480021
+#define SPR_8360_REV21 0x80490021
#define SPR_8323E_REV10 0x80620010
#define SPR_8323_REV10 0x80630010
@@ -600,7 +602,9 @@
#define SCCR_TSEC1CM_3 0xC0000000
#define SCCR_TSEC1ON 0x20000000
+#define SCCR_TSEC1ON_SHIFT 29
#define SCCR_TSEC2ON 0x10000000
+#define SCCR_TSEC2ON_SHIFT 28
#endif
diff --git a/include/usb.h b/include/usb.h
index bf71554..4e1539f 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -169,7 +169,10 @@ struct usb_device {
* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || defined (CONFIG_USB_SL811HS)
+#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
+ defined(CONFIG_USB_OHCI_NEW) || defined (CONFIG_USB_SL811HS) || \
+ defined(CONFIG_USB_ISP116X_HCD)
+
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,int transfer_len);
@@ -177,6 +180,7 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len,struct devrequest *setup);
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
+void usb_event_poll(void);
/* Defines */
#define USB_UHCI_VEND_ID 0x8086
@@ -230,16 +234,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
/* big endian -> little endian conversion */
/* some CPUs are already little endian e.g. the ARM920T */
-#ifdef LITTLEENDIAN
-#define swap_16(x) ((unsigned short)(x))
-#define swap_32(x) ((unsigned long)(x))
-#else
-#define swap_16(x) \
+#define __swap_16(x) \
({ unsigned short x_ = (unsigned short)x; \
(unsigned short)( \
((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8) ); \
})
-#define swap_32(x) \
+#define __swap_32(x) \
({ unsigned long x_ = (unsigned long)x; \
(unsigned long)( \
((x_ & 0x000000FFUL) << 24) | \
@@ -247,6 +247,13 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate);
((x_ & 0x00FF0000UL) >> 8) | \
((x_ & 0xFF000000UL) >> 24) ); \
})
+
+#ifdef LITTLEENDIAN
+# define swap_16(x) (x)
+# define swap_32(x) (x)
+#else
+# define swap_16(x) __swap_16(x)
+# define swap_32(x) __swap_32(x)
#endif /* LITTLEENDIAN */
/*
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
new file mode 100644
index 0000000..87bf50c
--- /dev/null
+++ b/include/usb_cdc_acm.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* ACM Control Requests */
+#define ACM_SEND_ENCAPSULATED_COMMAND 0x00
+#define ACM_GET_ENCAPSULATED_RESPONSE 0x01
+#define ACM_SET_COMM_FEATURE 0x02
+#define ACM_GET_COMM_FEATRUE 0x03
+#define ACM_CLEAR_COMM_FEATURE 0x04
+#define ACM_SET_LINE_ENCODING 0x20
+#define ACM_GET_LINE_ENCODING 0x21
+#define ACM_SET_CONTROL_LINE_STATE 0x22
+#define ACM_SEND_BREAK 0x23
+
+/* ACM Notification Codes */
+#define ACM_NETWORK_CONNECTION 0x00
+#define ACM_RESPONSE_AVAILABLE 0x01
+#define ACM_SERIAL_STATE 0x20
+
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */
+struct rs232_emu{
+ unsigned long dter;
+ unsigned char stop_bits;
+ unsigned char parity;
+ unsigned char data_bits;
+}__attribute__((packed));
diff --git a/include/usbdcore.h b/include/usbdcore.h
index 6e92df1..cb2be72 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -576,6 +576,9 @@ struct usb_device_instance {
void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
+ /* Do cdc device specific control requests */
+ int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
+
/* bus interface */
struct usb_bus_instance *bus; /* which bus interface driver */
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
new file mode 100644
index 0000000..9df62f4
--- /dev/null
+++ b/include/usbdcore_mpc8xx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit
+ * bodonoghue@codehermit.ie
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <commproc.h>
+
+/* Mode Register */
+#define USMOD_EN 0x01
+#define USMOD_HOST 0x02
+#define USMOD_TEST 0x04
+#define USMOD_SFTE 0x08
+#define USMOD_RESUME 0x40
+#define USMOD_LSS 0x80
+
+/* Endpoint Registers */
+#define USEP_RHS_NORM 0x00
+#define USEP_RHS_IGNORE 0x01
+#define USEP_RHS_NAK 0x02
+#define USEP_RHS_STALL 0x03
+
+#define USEP_THS_NORM 0x00
+#define USEP_THS_IGNORE 0x04
+#define USEP_THS_NAK 0x08
+#define USEP_THS_STALL 0x0C
+
+#define USEP_RTE 0x10
+#define USEP_MF 0x20
+
+#define USEP_TM_CONTROL 0x00
+#define USEP_TM_INT 0x100
+#define USEP_TM_BULK 0x200
+#define USEP_TM_ISO 0x300
+
+/* Command Register */
+#define USCOM_EP0 0x00
+#define USCOM_EP1 0x01
+#define USCOM_EP2 0x02
+#define USCOM_EP3 0x03
+
+#define USCOM_FLUSH 0x40
+#define USCOM_STR 0x80
+
+/* Event Register */
+#define USB_E_RXB 0x0001
+#define USB_E_TXB 0x0002
+#define USB_E_BSY 0x0004
+#define USB_E_SOF 0x0008
+#define USB_E_TXE1 0x0010
+#define USB_E_TXE2 0x0020
+#define USB_E_TXE3 0x0040
+#define USB_E_TXE4 0x0080
+#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4)
+#define USB_E_IDLE 0x0100
+#define USB_E_RESET 0x0200
+
+/* Mask Register */
+#define USBS_IDLE 0x01
+
+/* RX Buffer Descriptor */
+#define RX_BD_OV 0x02
+#define RX_BD_CR 0x04
+#define RX_BD_AB 0x08
+#define RX_BD_NO 0x10
+#define RX_BD_PID_DATA0 0x00
+#define RX_BD_PID_DATA1 0x40
+#define RX_BD_PID_SETUP 0x80
+#define RX_BD_F 0x400
+#define RX_BD_L 0x800
+#define RX_BD_I 0x1000
+#define RX_BD_W 0x2000
+#define RX_BD_E 0x8000
+
+/* Useful masks */
+#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP)
+#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL)
+#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK)
+#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF)
+
+/* TX Buffer Descriptor */
+#define TX_BD_UN 0x02
+#define TX_BD_TO 0x04
+#define TX_BD_NO_PID 0x00
+#define TX_BD_PID_DATA0 0x80
+#define TX_BD_PID_DATA1 0xC0
+#define TX_BD_CNF 0x200
+#define TX_BD_TC 0x400
+#define TX_BD_L 0x800
+#define TX_BD_I 0x1000
+#define TX_BD_W 0x2000
+#define TX_BD_R 0x8000
+
+/* Implementation specific defines */
+
+#define EP_MIN_PACKET_SIZE 0x08
+#define MAX_ENDPOINTS 0x04
+#define FIFO_SIZE 0x10
+#define EP_MAX_PKT FIFO_SIZE
+#define TX_RING_SIZE 0x04
+#define RX_RING_SIZE 0x06
+#define USB_MAX_PKT 0x40
+#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80
+#define TOGGLE_RX_PID(x) x^= 0x40
+#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */
+#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */
+
+#define PROFF_USB 0x00000000
+#define CPM_USB_BASE 0x00000A00
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE EP_MAX_PKT
+#define UDC_OUT_ENDPOINT 0x02
+#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_IN_ENDPOINT 0x03
+#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_INT_ENDPOINT 0x01
+#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE
+
+struct mpc8xx_ep {
+ struct urb * urb;
+ unsigned char pid;
+ unsigned char sc;
+ volatile cbd_t * prx;
+};
+
+typedef struct mpc8xx_usb{
+ char usmod; /* Mode Register */
+ char usaddr; /* Slave Address Register */
+ char uscom; /* Command Register */
+ char res1; /* Reserved */
+ ushort usep[4];
+ ulong res2; /* Reserved */
+ ushort usber; /* Event Register */
+ ushort res3; /* Reserved */
+ ushort usbmr; /* Mask Register */
+ char res4; /* Reserved */
+ char usbs; /* Status Register */
+ char res5[8]; /* Reserved */
+}usb_t;
+
+typedef struct mpc8xx_parameter_ram{
+ ushort ep0ptr; /* Endpoint Pointer Register 0 */
+ ushort ep1ptr; /* Endpoint Pointer Register 1 */
+ ushort ep2ptr; /* Endpoint Pointer Register 2 */
+ ushort ep3ptr; /* Endpoint Pointer Register 3 */
+ uint rstate; /* Receive state */
+ uint rptr; /* Receive internal data pointer */
+ ushort frame_n; /* Frame number */
+ ushort rbcnt; /* Receive byte count */
+ uint rtemp; /* Receive temp cp use only */
+ uint rxusb; /* Rx Data Temp */
+ ushort rxuptr; /* Rx microcode return address temp */
+}usb_pram_t;
+
+typedef struct endpoint_parameter_block_pointer{
+ ushort rbase; /* RxBD base address */
+ ushort tbase; /* TxBD base address */
+ char rfcr; /* Rx Function code */
+ char tfcr; /* Tx Function code */
+ ushort mrblr; /* Maximum Receive Buffer Length */
+ ushort rbptr; /* RxBD pointer Next Buffer Descriptor */
+ ushort tbptr; /* TxBD pointer Next Buffer Descriptor */
+ ulong tstate; /* Transmit internal state */
+ ulong tptr; /* Transmit internal data pointer */
+ ushort tcrc; /* Transmit temp CRC */
+ ushort tbcnt; /* Transmit internal bye count */
+ ulong ttemp; /* Tx temp */
+ ushort txuptr; /* Tx microcode return address */
+ ushort res1; /* Reserved */
+}usb_epb_t;
+
+typedef enum mpc8xx_udc_state{
+ STATE_NOT_READY,
+ STATE_ERROR,
+ STATE_READY,
+}mpc8xx_udc_state_t;
+
+/* Declarations */
+int udc_init(void);
+void udc_irq(void);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 6ea3331..526fcd9 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -161,10 +161,20 @@
#define UDC_VBUS_CTRL (1 << 19)
#define UDC_VBUS_MODE (1 << 18)
-
-void omap1510_udc_irq(void);
-void omap1510_udc_noniso_irq(void);
-
+/* OMAP Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT 1
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_INT_ENDPOINT 5
+#define UDC_INT_PKTSIZE 16
+#define UDC_BULK_PKTSIZE 16
+
+void udc_irq (void);
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
/* Higher level functions for abstracting away from specific device */
void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2d9f739..a752097 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -92,33 +92,42 @@
#define COMMUNICATIONS_DEVICE_CLASS 0x02
/* c.f. CDC 4.2 Table 15 */
-#define COMMUNICATIONS_INTERFACE_CLASS 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A
+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF
/* c.f. CDC 4.3 Table 16 */
-#define COMMUNICATIONS_NO_SUBCLASS 0x00
+#define COMMUNICATIONS_NO_SUBCLASS 0x00
#define COMMUNICATIONS_DLCM_SUBCLASS 0x01
-#define COMMUNICATIONS_ACM_SUBCLASS 0x02
-#define COMMUNICATIONS_TCM_SUBCLASS 0x03
+#define COMMUNICATIONS_ACM_SUBCLASS 0x02
+#define COMMUNICATIONS_TCM_SUBCLASS 0x03
#define COMMUNICATIONS_MCCM_SUBCLASS 0x04
-#define COMMUNICATIONS_CCM_SUBCLASS 0x05
+#define COMMUNICATIONS_CCM_SUBCLASS 0x05
#define COMMUNICATIONS_ENCM_SUBCLASS 0x06
#define COMMUNICATIONS_ANCM_SUBCLASS 0x07
/* c.f. WMCD 5.1 */
#define COMMUNICATIONS_WHCM_SUBCLASS 0x08
-#define COMMUNICATIONS_DMM_SUBCLASS 0x09
+#define COMMUNICATIONS_DMM_SUBCLASS 0x09
#define COMMUNICATIONS_MDLM_SUBCLASS 0x0a
#define COMMUNICATIONS_OBEX_SUBCLASS 0x0b
-/* c.f. CDC 4.6 Table 18 */
+/* c.f. CDC 4.4 Table 17 */
+#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/
+
+/* c.f. CDC 4.5 Table 18 */
#define DATA_INTERFACE_CLASS 0x0a
+/* c.f. CDC 4.6 No Table */
+#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */
+
/* c.f. CDC 4.7 Table 19 */
-#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */
/* c.f. CDC 5.2.3 Table 24 */
-#define CS_INTERFACE 0x24
+#define CS_INTERFACE 0x24
#define CS_ENDPOINT 0x25
/*
@@ -128,7 +137,7 @@
* c.f. WMCD 5.3 Table 5.3
*/
-#define USB_ST_HEADER 0x00
+#define USB_ST_HEADER 0x00
#define USB_ST_CMF 0x01
#define USB_ST_ACMF 0x02
#define USB_ST_DLMF 0x03
@@ -137,18 +146,18 @@
#define USB_ST_UF 0x06
#define USB_ST_CSF 0x07
#define USB_ST_TOMF 0x08
-#define USB_ST_USBTF 0x09
+#define USB_ST_USBTF 0x09
#define USB_ST_NCT 0x0a
#define USB_ST_PUF 0x0b
#define USB_ST_EUF 0x0c
#define USB_ST_MCMF 0x0d
#define USB_ST_CCMF 0x0e
#define USB_ST_ENF 0x0f
-#define USB_ST_ATMNF 0x10
+#define USB_ST_ATMNF 0x10
#define USB_ST_WHCM 0x11
#define USB_ST_MDLM 0x12
-#define USB_ST_MDLMD 0x13
+#define USB_ST_MDLMD 0x13
#define USB_ST_DMM 0x14
#define USB_ST_OBEX 0x15
#define USB_ST_CS 0x16
@@ -312,7 +321,8 @@ struct usb_class_union_function_descriptor {
u8 bDescriptorType;
u8 bDescriptorSubtype; /* 0x06 */
u8 bMasterInterface;
- u8 bSlaveInterface0[0];
+ /* u8 bSlaveInterface0[0]; */
+ u8 bSlaveInterface0;
} __attribute__ ((packed));
struct usb_class_country_selection_descriptor {
diff --git a/lib_arm/board.c b/lib_arm/board.c
index 8f4e19b..d37e5da 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -364,6 +364,13 @@ void start_armboot (void)
enable_interrupts ();
/* Perform network card initialisation if necessary */
+#ifdef CONFIG_DRIVER_TI_EMAC
+extern void dm644x_eth_set_mac_addr (const u_int8_t *addr);
+ if (getenv ("ethaddr")) {
+ dm644x_eth_set_mac_addr(gd->bd->bi_enetaddr);
+ }
+#endif
+
#ifdef CONFIG_DRIVER_CS8900
cs8900_get_enetaddr (gd->bd->bi_enetaddr);
#endif
diff --git a/lib_avr32/Makefile b/lib_avr32/Makefile
index cf20836..bb2938f 100644
--- a/lib_avr32/Makefile
+++ b/lib_avr32/Makefile
@@ -29,7 +29,7 @@ LIB = $(obj)lib$(ARCH).a
SOBJS = memset.o
-COBJS = board.o interrupts.o avr32_linux.o div64.o
+COBJS = board.o interrupts.o avr32_linux.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index b2091c5..bf37752 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -27,7 +27,7 @@ LIB = $(obj)libgeneric.a
COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
- crc32.o ctype.o display_options.o ldiv.o sha1.o \
+ crc32.o ctype.o display_options.o div64.o ldiv.o sha1.o \
string.o vsprintf.o zlib.o
SRCS := $(COBJS:.o=.c)
diff --git a/lib_avr32/div64.c b/lib_generic/div64.c
index 99726e3..d9951b5 100644
--- a/lib_avr32/div64.c
+++ b/lib_generic/div64.c
@@ -18,8 +18,6 @@
#include <linux/types.h>
-#include <asm/div64.h>
-
uint32_t __div64_32(uint64_t *n, uint32_t base)
{
uint64_t rem = *n;
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 325f5c2..c87d46c 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -309,7 +309,9 @@ init_fnc_t *init_sequence[] = {
prt_8260_rsr,
prt_8260_clks,
#endif /* CONFIG_8260 */
-
+#if defined(CONFIG_MPC83XX)
+ prt_83xx_rsr,
+#endif
checkcpu,
#if defined(CONFIG_MPC5xxx)
prt_mpc5xxx_clks,
@@ -376,7 +378,7 @@ void board_init_f (ulong bootflag)
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
-#if !defined(CONFIG_CPM2)
+#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83XX)
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
#endif
diff --git a/net/eth.c b/net/eth.c
index 6576ee4..c8f92a5 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -464,6 +464,8 @@ extern int at91rm9200_miiphy_initialize(bd_t *bis);
extern int emac4xx_miiphy_initialize(bd_t *bis);
extern int mcf52x2_miiphy_initialize(bd_t *bis);
extern int ns7520_miiphy_initialize(bd_t *bis);
+extern int dm644x_eth_miiphy_initialize(bd_t *bis);
+
int eth_initialize(bd_t *bis)
{
@@ -484,6 +486,9 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_NETARM)
ns7520_miiphy_initialize(bis);
#endif
+#if defined(CONFIG_DRIVER_TI_EMAC)
+ dm644x_eth_miiphy_initialize(bis);
+#endif
return 0;
}
#endif