summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/device-tree-bindings/i2c/i2c-mux.txt60
-rw-r--r--drivers/i2c/Kconfig2
-rw-r--r--drivers/i2c/Makefile2
-rw-r--r--drivers/i2c/muxes/Kconfig8
-rw-r--r--drivers/i2c/muxes/Makefile6
-rw-r--r--drivers/i2c/muxes/i2c-mux-uclass.c198
-rw-r--r--include/dm/uclass-id.h1
-rw-r--r--include/i2c.h39
8 files changed, 316 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/i2c/i2c-mux.txt b/doc/device-tree-bindings/i2c/i2c-mux.txt
new file mode 100644
index 0000000..af84cce
--- /dev/null
+++ b/doc/device-tree-bindings/i2c/i2c-mux.txt
@@ -0,0 +1,60 @@
+Common i2c bus multiplexer/switch properties.
+
+An i2c bus multiplexer/switch will have several child busses that are
+numbered uniquely in a device dependent manner. The nodes for an i2c bus
+multiplexer/switch will have one child node for each child
+bus.
+
+Required properties:
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for child nodes:
+- #address-cells = <1>;
+- #size-cells = <0>;
+- reg : The sub-bus number.
+
+Optional properties for child nodes:
+- Other properties specific to the multiplexer/switch hardware.
+- Child nodes conforming to i2c bus binding
+
+
+Example :
+
+ /*
+ An NXP pca9548 8 channel I2C multiplexer at address 0x70
+ with two NXP pca8574 GPIO expanders attached, one each to
+ ports 3 and 4.
+ */
+
+ mux@70 {
+ compatible = "nxp,pca9548";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ gpio1: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ gpio2: gpio@38 {
+ compatible = "nxp,pca8574";
+ reg = <0x38>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+ };
+ };
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 86fb36b..caee3d8 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -73,3 +73,5 @@ config SYS_I2C_UNIPHIER_F
help
Support for UniPhier FIFO-builtin I2C controller driver.
This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
+
+source "drivers/i2c/muxes/Kconfig"
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index d9e912f..dc9e81b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -37,3 +37,5 @@ obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o
obj-$(CONFIG_SYS_I2C_UNIPHIER_F) += i2c-uniphier-f.o
obj-$(CONFIG_SYS_I2C_ZYNQ) += zynq_i2c.o
+
+obj-y += muxes/
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
new file mode 100644
index 0000000..a05b32d
--- /dev/null
+++ b/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,8 @@
+config I2C_MUX
+ bool "Suport I2C multiplexers"
+ depends on DM_I2C
+ help
+ This enables I2C buses to be multiplexed, so that you can select
+ one of several buses using some sort of control mechanism. The
+ bus select is handled automatically when that bus is accessed,
+ using a suitable I2C MUX driver.
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
new file mode 100644
index 0000000..7583e3a
--- /dev/null
+++ b/drivers/i2c/muxes/Makefile
@@ -0,0 +1,6 @@
+#
+# Copyright (c) 2015 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+obj-$(CONFIG_I2C_MUX) += i2c-mux-uclass.o
diff --git a/drivers/i2c/muxes/i2c-mux-uclass.c b/drivers/i2c/muxes/i2c-mux-uclass.c
new file mode 100644
index 0000000..3f52bff
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-uclass.c
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <i2c.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+ * struct i2c_mux: Information the uclass stores about an I2C mux
+ *
+ * @selected: Currently selected mux, or -1 for none
+ * @i2c_bus: I2C bus to use for communcation
+ */
+struct i2c_mux {
+ int selected;
+ struct udevice *i2c_bus;
+};
+
+/**
+ * struct i2c_mux_bus: Information about each bus the mux controls
+ *
+ * @channel: Channel number used to select this bus
+ */
+struct i2c_mux_bus {
+ uint channel;
+};
+
+/* Find out the mux channel number */
+static int i2c_mux_child_post_bind(struct udevice *dev)
+{
+ struct i2c_mux_bus *plat = dev_get_parent_platdata(dev);
+ int channel;
+
+ channel = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1);
+ if (channel < 0)
+ return -EINVAL;
+ plat->channel = channel;
+
+ return 0;
+}
+
+/* Find the I2C buses selected by this mux */
+static int i2c_mux_post_bind(struct udevice *mux)
+{
+ const void *blob = gd->fdt_blob;
+ int ret;
+ int offset;
+
+ debug("%s: %s\n", __func__, mux->name);
+ /*
+ * There is no compatible string in the sub-nodes, so we must manually
+ * bind these
+ */
+ for (offset = fdt_first_subnode(blob, mux->of_offset);
+ offset > 0;
+ offset = fdt_next_subnode(blob, offset)) {
+ struct udevice *dev;
+ const char *name;
+
+ name = fdt_get_name(blob, offset, NULL);
+ ret = device_bind_driver_to_node(mux, "i2c_mux_bus_drv", name,
+ offset, &dev);
+ debug(" - bind ret=%d, %s\n", ret, dev ? dev->name : NULL);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Set up the mux ready for use */
+static int i2c_mux_post_probe(struct udevice *mux)
+{
+ struct i2c_mux *priv = dev_get_uclass_priv(mux);
+ int ret;
+
+ debug("%s: %s\n", __func__, mux->name);
+ priv->selected = -1;
+
+ ret = uclass_get_device_by_phandle(UCLASS_I2C, mux, "i2c-parent",
+ &priv->i2c_bus);
+ if (ret)
+ return ret;
+ debug("%s: bus=%p/%s\n", __func__, priv->i2c_bus, priv->i2c_bus->name);
+
+ return 0;
+}
+
+int i2c_mux_select(struct udevice *dev)
+{
+ struct i2c_mux_bus *plat = dev_get_parent_platdata(dev);
+ struct udevice *mux = dev->parent;
+ struct i2c_mux_ops *ops = i2c_mux_get_ops(mux);
+
+ if (!ops->select)
+ return -ENOSYS;
+
+ return ops->select(mux, dev, plat->channel);
+}
+
+int i2c_mux_deselect(struct udevice *dev)
+{
+ struct i2c_mux_bus *plat = dev_get_parent_platdata(dev);
+ struct udevice *mux = dev->parent;
+ struct i2c_mux_ops *ops = i2c_mux_get_ops(mux);
+
+ if (!ops->deselect)
+ return -ENOSYS;
+
+ return ops->deselect(mux, dev, plat->channel);
+}
+
+static int i2c_mux_bus_set_bus_speed(struct udevice *dev, unsigned int speed)
+{
+ struct udevice *mux = dev->parent;
+ struct i2c_mux *priv = dev_get_uclass_priv(mux);
+ int ret, ret2;
+
+ ret = i2c_mux_select(dev);
+ if (ret)
+ return ret;
+ ret = dm_i2c_set_bus_speed(priv->i2c_bus, speed);
+ ret2 = i2c_mux_deselect(dev);
+
+ return ret ? ret : ret2;
+}
+
+static int i2c_mux_bus_probe(struct udevice *dev, uint chip_addr,
+ uint chip_flags)
+{
+ struct udevice *mux = dev->parent;
+ struct i2c_mux *priv = dev_get_uclass_priv(mux);
+ struct dm_i2c_ops *ops = i2c_get_ops(priv->i2c_bus);
+ int ret, ret2;
+
+ debug("%s: %s, bus %s\n", __func__, dev->name, priv->i2c_bus->name);
+ if (!ops->probe_chip)
+ return -ENOSYS;
+ ret = i2c_mux_select(dev);
+ if (ret)
+ return ret;
+ ret = ops->probe_chip(priv->i2c_bus, chip_addr, chip_flags);
+ ret2 = i2c_mux_deselect(dev);
+
+ return ret ? ret : ret2;
+}
+
+static int i2c_mux_bus_xfer(struct udevice *dev, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct udevice *mux = dev->parent;
+ struct i2c_mux *priv = dev_get_uclass_priv(mux);
+ struct dm_i2c_ops *ops = i2c_get_ops(priv->i2c_bus);
+ int ret, ret2;
+
+ debug("%s: %s, bus %s\n", __func__, dev->name, priv->i2c_bus->name);
+ if (!ops->xfer)
+ return -ENOSYS;
+ ret = i2c_mux_select(dev);
+ if (ret)
+ return ret;
+ ret = ops->xfer(priv->i2c_bus, msg, nmsgs);
+ ret2 = i2c_mux_deselect(dev);
+
+ return ret ? ret : ret2;
+}
+
+static const struct dm_i2c_ops i2c_mux_bus_ops = {
+ .xfer = i2c_mux_bus_xfer,
+ .probe_chip = i2c_mux_bus_probe,
+ .set_bus_speed = i2c_mux_bus_set_bus_speed,
+};
+
+U_BOOT_DRIVER(i2c_mux_bus) = {
+ .name = "i2c_mux_bus_drv",
+ .id = UCLASS_I2C,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .ops = &i2c_mux_bus_ops,
+};
+
+UCLASS_DRIVER(i2c_mux) = {
+ .id = UCLASS_I2C_MUX,
+ .name = "i2c_mux",
+ .post_bind = i2c_mux_post_bind,
+ .post_probe = i2c_mux_post_probe,
+ .per_device_auto_alloc_size = sizeof(struct i2c_mux),
+ .per_child_platdata_auto_alloc_size = sizeof(struct i2c_mux_bus),
+ .child_post_bind = i2c_mux_child_post_bind,
+};
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index bc057d7..777b101 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -35,6 +35,7 @@ enum uclass_id {
UCLASS_I2C, /* I2C bus */
UCLASS_I2C_EEPROM, /* I2C EEPROM device */
UCLASS_I2C_GENERIC, /* Generic I2C device */
+ UCLASS_I2C_MUX, /* I2C multiplexer */
UCLASS_LED, /* Light-emitting diode (LED) */
UCLASS_LPC, /* x86 'low pin count' interface */
UCLASS_MASS_STORAGE, /* Mass storage device */
diff --git a/include/i2c.h b/include/i2c.h
index d191829..6493931 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -445,6 +445,45 @@ struct dm_i2c_ops {
#define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops)
/**
+ * struct i2c_mux_ops - operations for an I2C mux
+ *
+ * The current mux state is expected to be stored in the mux itself since
+ * it is the only thing that knows how to make things work. The mux can
+ * record the current state and then avoid switching unless it is necessary.
+ * So select() can be skipped if the mux is already in the correct state.
+ * Also deselect() can be made a nop if required.
+ */
+struct i2c_mux_ops {
+ /**
+ * select() - select one of of I2C buses attached to a mux
+ *
+ * This will be called when there is no bus currently selected by the
+ * mux. This method does not need to deselect the old bus since
+ * deselect() will be already have been called if necessary.
+ *
+ * @mux: Mux device
+ * @bus: I2C bus to select
+ * @channel: Channel number correponding to the bus to select
+ * @return 0 if OK, -ve on error
+ */
+ int (*select)(struct udevice *mux, struct udevice *bus, uint channel);
+
+ /**
+ * deselect() - select one of of I2C buses attached to a mux
+ *
+ * This is used to deselect the currently selected I2C bus.
+ *
+ * @mux: Mux device
+ * @bus: I2C bus to deselect
+ * @channel: Channel number correponding to the bus to deselect
+ * @return 0 if OK, -ve on error
+ */
+ int (*deselect)(struct udevice *mux, struct udevice *bus, uint channel);
+};
+
+#define i2c_mux_get_ops(dev) ((struct i2c_mux_ops *)(dev)->driver->ops)
+
+/**
* i2c_get_chip() - get a device to use to access a chip on a bus
*
* This returns the device for the given chip address. The device can then