summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile9
-rw-r--r--board/amcc/canyonlands/canyonlands.c25
-rw-r--r--cpu/ppc4xx/4xx_enet.c51
-rw-r--r--include/configs/canyonlands.h125
-rw-r--r--include/ppc440.h4
-rw-r--r--include/ppc4xx_enet.h4
8 files changed, 195 insertions, 25 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index e31ea06..d9ffebf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -322,6 +322,7 @@ Stefan Roese <sr@denx.de>
bunbinga PPC405EP
canyonlands PPC460EX
ebony PPC440GP
+ glacier PPC460GT
haleakala PPC405EXr
katmai PPC440SPe
kilauea PPC405EX
diff --git a/MAKEALL b/MAKEALL
index 01573da..b2ae35b 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -185,6 +185,7 @@ LIST_4xx=" \
ERIC \
EXBITGEN \
G2000 \
+ glacier \
haleakala \
haleakala_nand \
hcu4 \
diff --git a/Makefile b/Makefile
index 4255cf5..744abae 100644
--- a/Makefile
+++ b/Makefile
@@ -1172,8 +1172,13 @@ bubinga_config: unconfig
CANBT_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
-canyonlands_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx canyonlands amcc
+# Canyonlands & Glacier use different U-Boot images
+canyonlands_config \
+glacier_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
+ tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
canyonlands_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 36779f5..fa3ae85 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -35,6 +35,7 @@ DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
u32 sdr0_cust0;
+ u32 pvr = get_pvr();
/*------------------------------------------------------------------+
* Setup the interrupt controller polarities, triggers, etc.
@@ -105,14 +106,16 @@ int board_early_init_f(void)
mtdcr(AHB_TOP, 0x8000004B);
mtdcr(AHB_BOT, 0x8000004B);
- /*
- * Configure USB-STP pins as alternate and not GPIO
- * It seems to be neccessary to configure the STP pins as GPIO
- * input at powerup (perhaps while USB reset is asserted). So
- * we configure those pins to their "real" function now.
- */
- gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
- gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA)) {
+ /*
+ * Configure USB-STP pins as alternate and not GPIO
+ * It seems to be neccessary to configure the STP pins as GPIO
+ * input at powerup (perhaps while USB reset is asserted). So
+ * we configure those pins to their "real" function now.
+ */
+ gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+ }
return 0;
}
@@ -369,6 +372,7 @@ int misc_init_r(void)
{
u32 sdr0_srst1 = 0;
u32 eth_cfg;
+ u32 pvr = get_pvr();
/*
* Set EMAC mode/configuration (GMII, SGMII, RGMII...).
@@ -382,7 +386,10 @@ int misc_init_r(void)
/* Set the for 2 RGMII mode */
/* GMC0 EMAC4_0, GMC0 EMAC4_1, RGMII Bridge 0 */
eth_cfg &= ~SDR0_ETH_CFG_GMC0_BRIDGE_SEL;
- eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ if ((pvr == PVR_460EX_RA) || (pvr == PVR_460EX_SE_RA))
+ eth_cfg |= SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
+ else
+ eth_cfg &= ~SDR0_ETH_CFG_GMC1_BRIDGE_SEL;
mtsdr(SDR0_ETH_CFG, eth_cfg);
/*
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d990250..4541a14 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -275,6 +275,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
+ u32 eth_cfg = 0;
out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */
@@ -308,6 +309,13 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
hw_p->print_speed = 1; /* print speed message again next time */
#endif
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+ /* don't bypass the TAHOE0/TAHOE1 cores for Linux */
+ mfsdr(SDR0_ETH_CFG, eth_cfg);
+ eth_cfg &= ~(SDR0_ETH_CFG_TAHOE0_BYPASS | SDR0_ETH_CFG_TAHOE1_BYPASS);
+ mtsdr(SDR0_ETH_CFG, eth_cfg);
+#endif
+
return;
}
@@ -494,11 +502,18 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
u32 zmiifer; /* ZMII0_FER reg. */
u32 rmiifer; /* RGMII0_FER reg. Bridge 0 */
u32 rmiifer1; /* RGMII0_FER reg. Bridge 1 */
+ int mode;
zmiifer = 0;
rmiifer = 0;
rmiifer1 = 0;
+#if defined(CONFIG_460EX)
+ mode = 9;
+#else
+ mode = 10;
+#endif
+
/* TODO:
* NOTE: 460GT has 2 RGMII bridge cores:
* emac0 ------ RGMII0_BASE
@@ -520,7 +535,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
* Right now only 2*RGMII is supported. Please extend when needed.
* sr - 2008-02-19
*/
- switch (9) {
+ switch (mode) {
case 1:
/* 1 MII - 460EX */
/* GMC0 EMAC4_0, ZMII Bridge */
@@ -836,10 +851,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
reg = CONFIG_PHY1_ADDR;
break;
#endif
-#if defined (CONFIG_440GX)
+#if defined (CONFIG_PHY2_ADDR)
case 2:
reg = CONFIG_PHY2_ADDR;
break;
+#endif
+#if defined (CONFIG_PHY3_ADDR)
case 3:
reg = CONFIG_PHY3_ADDR;
break;
@@ -1131,7 +1148,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- mtdcr (malrxctp8r, hw_p->rx);
+ mtdcr (malrxctp8r, hw_p->rx_phys);
/* set RX buffer size */
mtdcr (malrcbs8, ENET_MAX_MTU_ALIGNED / 16);
#else
@@ -1160,6 +1177,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
mtdcr (malrcbs3, ENET_MAX_MTU_ALIGNED / 16);
break;
#endif /* CONFIG_440GX */
+#if defined (CONFIG_460GT)
+ case 2:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (maltxctp2r, hw_p->tx_phys);
+ mtdcr (malrxctp16r, hw_p->rx_phys);
+ /* set RX buffer size */
+ mtdcr (malrcbs16, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+ case 3:
+ /* setup MAL tx & rx channel pointers */
+ mtdcr (maltxbattr, 0x0);
+ mtdcr (malrxbattr, 0x0);
+ mtdcr (maltxctp3r, hw_p->tx_phys);
+ mtdcr (malrxctp24r, hw_p->rx_phys);
+ /* set RX buffer size */
+ mtdcr (malrcbs24, ENET_MAX_MTU_ALIGNED / 16);
+ break;
+#endif /* CONFIG_460GT */
case 0:
default:
/* setup MAL tx & rx channel pointers */
@@ -1866,14 +1903,22 @@ int ppc_4xx_eth_initialize (bd_t * bis)
case 2:
memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
bis->bi_enet2addr, 6);
+#if defined(CONFIG_460GT)
+ hw_addr[eth_num] = 0x300;
+#else
hw_addr[eth_num] = 0x400;
+#endif
break;
#endif
#ifdef CONFIG_HAS_ETH3
case 3:
memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START],
bis->bi_enet3addr, 6);
+#if defined(CONFIG_460GT)
+ hw_addr[eth_num] = 0x400;
+#else
hw_addr[eth_num] = 0x600;
+#endif
break;
#endif
}
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index a4bcc65..76a2f7c 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -27,10 +27,14 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_CANYONLANDS 1 /* Board is Canyonlands */
+/* This config file is used for Canyonlands (460EX) and Glacier (460GT) */
+#ifndef CONFIG_CANYONLANDS
+#define CONFIG_460GT 1 /* Specific PPC460GT */
+#else
+#define CONFIG_460EX 1 /* Specific PPC460EX */
+#endif
#define CONFIG_440 1
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_460EX 1 /* Specific PPC460EX support */
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
@@ -262,8 +266,15 @@
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1
-#define CONFIG_HAS_ETH0 1
-#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+/* Only Glacier (460GT) has 4 EMAC interfaces */
+#ifdef CONFIG_460GT
+#define CONFIG_PHY2_ADDR 2
+#define CONFIG_PHY3_ADDR 3
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#endif
#define CONFIG_NET_MULTI 1
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
@@ -275,6 +286,8 @@
/*-----------------------------------------------------------------------
* USB-OHCI
*----------------------------------------------------------------------*/
+/* Only Canyonlands (460EX) has USB */
+#ifdef CONFIG_460EX
#define CONFIG_USB_OHCI_NEW
#define CONFIG_USB_STORAGE
#undef CFG_OHCI_BE_CONTROLLER /* 460EX has little endian descriptors */
@@ -283,6 +296,7 @@
#define CFG_USB_OHCI_REGS_BASE (CFG_AHB_BASE | 0xd0000)
#define CFG_USB_OHCI_SLOT_NAME "ppc440"
#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+#endif
/*-----------------------------------------------------------------------
* Default environment
@@ -293,9 +307,21 @@
#undef CONFIG_BOOTARGS
+/* Setup some board specific values for the default environment variables */
+#ifdef CONFIG_CANYONLANDS
+#define CONFIG_HOSTNAME canyonlands
+#define CFG_BOOTFILE "bootfile=canyonlands/uImage\0"
+#define CFG_DTBFILE "fdt_file=canyonlands/canyonlands.dtb\0"
+#else
+#define CONFIG_HOSTNAME glacier
+#define CFG_BOOTFILE "bootfile=glacier/uImage\0"
+#define CFG_DTBFILE "fdt_file=glacier/glacier.dtb\0"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
+ CFG_BOOTFILE \
+ CFG_DTBFILE \
"netdev=eth0\0" \
- "hostname=canyonlands\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -315,18 +341,16 @@
"flash_self=run ramargs addip addtty;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"rootpath=/opt/eldk/ppc_4xxFP\0" \
- "bootfile=canyonlands/uImage\0" \
- "fdt_file=canyonlands/canyonlands.dtb\0" \
"fdt_addr=400000\0" \
"kernel_addr=fc000000\0" \
"ramdisk_addr=fc200000\0" \
"initrd_high=30000000\0" \
- "load=tftp 200000 canyonlands/u-boot.bin\0" \
+ "load=tftp 200000 ${hostname}/u-boot.bin\0" \
"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \
"cp.b ${fileaddr} fffa0000 ${filesize};" \
"setenv filesize;saveenv\0" \
"upd=run load update\0" \
- "nload=tftp 200000 canyonlands/u-boot-nand.bin\0" \
+ "nload=tftp 200000 ${hostname}/u-boot-nand.bin\0" \
"nupdate=nand erase 0 60000;nand write 200000 0 60000;" \
"setenv filesize;saveenv\0" \
"nupd=run nload nupdate\0" \
@@ -361,8 +385,6 @@
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
@@ -373,7 +395,11 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SDRAM
+#ifdef CONFIG_460EX
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
+#endif
/* Partitions */
#define CONFIG_MAC_PARTITION
@@ -487,6 +513,8 @@
/*
* PPC4xx GPIO Configuration
*/
+#ifdef CONFIG_460EX
+/* 460EX: Use USB configuration */
#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
{ \
/* GPIO Core 0 */ \
@@ -559,6 +587,81 @@
{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
} \
}
+#else
+/* 460GT: Use EMAC2+3 configuration */
+#define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
+{ \
+/* GPIO Core 0 */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 GMC1TxD(0) USB2HostD(0) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 GMC1TxD(1) USB2HostD(1) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 GMC1TxD(2) USB2HostD(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 GMC1TxD(3) USB2HostD(3) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 GMC1TxD(4) USB2HostD(4) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 GMC1TxD(5) USB2HostD(5) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 GMC1TxD(6) USB2HostD(6) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 GMC1TxD(7) USB2HostD(7) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 GMC1RxD(0) USB2OTGD(0) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 GMC1RxD(1) USB2OTGD(1) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 GMC1RxD(2) USB2OTGD(2) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 GMC1RxD(3) USB2OTGD(3) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO12 GMC1RxD(4) USB2OTGD(4) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO13 GMC1RxD(5) USB2OTGD(5) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO14 GMC1RxD(6) USB2OTGD(6) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO15 GMC1RxD(7) USB2OTGD(7) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMC1TxER USB2HostStop */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMC1CD USB2HostNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMC1RxER USB2HostDir */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMC1TxEN USB2OTGStop */ \
+{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 GMC1CRS USB2OTGNext */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 GMC1RxDV USB2OTGDir */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO22 NFRDY */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 NFREN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 NFWEN */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 NFCLE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 NFALE */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO27 IRQ(0) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO28 IRQ(1) */ \
+{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO29 IRQ(2) */ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO30 PerPar0 DMAReq2 IRQ(7)*/ \
+{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO31 PerPar1 DMAAck2 IRQ(8)*/ \
+}, \
+{ \
+/* GPIO Core 1 */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 PerPar2 EOT2/TC2 IRQ(9)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 PerPar3 DMAReq3 IRQ(4)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_1}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N DMAAck3 UART3_SIN*/ \
+{GPIO1_BASE, GPIO_BI , GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EOT3/TC3 UART3_SOUT*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 IRQ(3) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 CS(1) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 CS(2) */ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 CS(3) DMAReq1 IRQ(10)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO44 CS(4) DMAAck1 IRQ(11)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO45 CS(5) EOT/TC1 IRQ(12)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 PerAddr(5) DMAReq0 IRQ(13)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 PerAddr(6) DMAAck0 IRQ(14)*/ \
+{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 PerAddr(7) EOT/TC0 IRQ(15)*/ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
+{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
+} \
+}
+#endif
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
diff --git a/include/ppc440.h b/include/ppc440.h
index 10517cb..642d1de 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -2023,9 +2023,13 @@
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
#define malrxctp8r (MAL_DCR_BASE+0x48) /* RX 8 Channel table pointer reg */
+#define malrxctp16r (MAL_DCR_BASE+0x50) /* RX 16 Channel table pointer reg */
+#define malrxctp24r (MAL_DCR_BASE+0x58) /* RX 24 Channel table pointer reg */
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
#define malrcbs8 (MAL_DCR_BASE+0x68) /* RX 8 Channel buffer size reg */
+#define malrcbs16 (MAL_DCR_BASE+0x70) /* RX 16 Channel buffer size reg */
+#define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */
#endif /* CONFIG_440GX */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index 0208454..89ff26f 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -213,6 +213,10 @@ typedef struct emac_4xx_hw_st {
#define RGMII_FER (RGMII_BASE + 0x00)
#define RGMII_SSR (RGMII_BASE + 0x04)
+#if defined(CONFIG_460GT)
+#define RGMII1_BASE_OFFSET 0x100
+#endif
+
/* RGMII Function Enable (FER) Register Bit Definitions */
/* Note: for EMAC 2 and 3 only, 440GX only */
#define RGMII_FER_DIS (0x00)