summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/atmel/at91sam9261ek/at91sam9261ek.c7
-rw-r--r--board/freescale/m5253demo/m5253demo.c9
-rw-r--r--board/scb9328/scb9328.c8
-rw-r--r--board/trizepsiv/conxs.c8
-rw-r--r--drivers/net/dm9000x.c44
-rw-r--r--include/configs/M5253DEMO.h1
-rw-r--r--include/configs/at91sam9261ek.h1
-rw-r--r--include/configs/scb9328.h1
-rw-r--r--include/configs/trizepsiv.h1
-rw-r--r--include/netdev.h1
10 files changed, 64 insertions, 17 deletions
diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c
index a89cb8b..0817e60 100644
--- a/board/atmel/at91sam9261ek/at91sam9261ek.c
+++ b/board/atmel/at91sam9261ek/at91sam9261ek.c
@@ -36,6 +36,7 @@
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000)
#include <net.h>
+#include <netdev.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -227,6 +228,12 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_DRIVER_DM9000
+ int board_eth_init(bd_t *bis)
+ {
+ return dm9000_initialize(bis);
+ }
+ #endif
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM;
diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
index b39cd4d..4772074 100644
--- a/board/freescale/m5253demo/m5253demo.c
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <asm/immap.h>
+#include <netdev.h>
int checkboard(void)
{
@@ -138,3 +139,11 @@ void ide_set_reset(int idereset)
}
}
#endif /* CONFIG_CMD_IDE */
+
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
index 3f6831b..428e8c9 100644
--- a/board/scb9328/scb9328.c
+++ b/board/scb9328/scb9328.c
@@ -19,6 +19,7 @@
*/
#include <common.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -70,3 +71,10 @@ void show_boot_progress (int status)
{
return;
}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index 7c6c855..5c0eb41 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -33,6 +33,7 @@
#include <common.h>
#include <asm/arch/pxa-regs.h>
+#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -144,3 +145,10 @@ int dram_init (void)
return 0;
}
+
+#ifdef CONFIG_DRIVER_DM9000
+int board_eth_init(bd_t *bis)
+{
+ return dm9000_initialize(bis);
+}
+#endif
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index f139435..efe9135 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -103,14 +103,12 @@ typedef struct board_info {
void (*outblk)(volatile void *data_ptr, int count);
void (*inblk)(void *data_ptr, int count);
void (*rx_status)(u16 *RxStatus, u16 *RxLen);
+ struct eth_device netdev;
} board_info_t;
static board_info_t dm9000_info;
+
/* function declaration ------------------------------------- */
-int eth_init(bd_t * bd);
-int eth_send(volatile void *, int);
-int eth_rx(void);
-void eth_halt(void);
static int dm9000_probe(void);
static u16 phy_read(int);
static void phy_write(int, u16);
@@ -279,17 +277,16 @@ dm9000_reset(void)
printf("ERROR: resetting DM9000 -> not responding\n");
}
-/* Initilize dm9000 board
+/* Initialize dm9000 board
*/
-int
-eth_init(bd_t * bd)
+static int dm9000_init(struct eth_device *dev, bd_t *bd)
{
int i, oft, lnk;
u8 io_mode;
struct board_info *db = &dm9000_info;
uchar enetaddr[6];
- DM9000_DBG("eth_init()\n");
+ DM9000_DBG("%s\n", __func__);
/* RESET device */
dm9000_reset();
@@ -411,13 +408,13 @@ eth_init(bd_t * bd)
Hardware start transmission.
Send a packet to media from the upper layer.
*/
-int
-eth_send(volatile void *packet, int length)
+static int dm9000_send(struct eth_device *netdev, volatile void *packet,
+ int length)
{
int tmo;
struct board_info *db = &dm9000_info;
- DM9000_DMP_PACKET("eth_send", packet, length);
+ DM9000_DMP_PACKET(__func__ , packet, length);
DM9000_iow(DM9000_ISR, IMR_PTM); /* Clear Tx bit in ISR */
@@ -453,10 +450,9 @@ eth_send(volatile void *packet, int length)
Stop the interface.
The interface is stopped when it is brought.
*/
-void
-eth_halt(void)
+static void dm9000_halt(struct eth_device *netdev)
{
- DM9000_DBG("eth_halt\n");
+ DM9000_DBG("%s\n", __func__);
/* RESET devie */
phy_write(0, 0x8000); /* PHY RESET */
@@ -468,8 +464,7 @@ eth_halt(void)
/*
Received a packet and pass to upper layer
*/
-int
-eth_rx(void)
+static int dm9000_rx(struct eth_device *netdev)
{
u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
u16 RxStatus, RxLen = 0;
@@ -529,7 +524,7 @@ eth_rx(void)
dm9000_reset();
}
} else {
- DM9000_DMP_PACKET("eth_rx", rdptr, RxLen);
+ DM9000_DMP_PACKET(__func__ , rdptr, RxLen);
DM9000_DBG("passing packet to upper layer\n");
NetReceive(NetRxPackets[0], RxLen);
@@ -621,3 +616,18 @@ phy_write(int reg, u16 value)
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
+
+int dm9000_initialize(bd_t *bis)
+{
+ struct eth_device *dev = &(dm9000_info.netdev);
+
+ dev->init = dm9000_init;
+ dev->halt = dm9000_halt;
+ dev->send = dm9000_send;
+ dev->recv = dm9000_rx;
+ sprintf(dev->name, "dm9000");
+
+ eth_register(dev);
+
+ return 0;
+}
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 1fea6c3..50b3a03 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -88,6 +88,7 @@
# define _IO_BASE 0
#endif
+#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000
#ifdef CONFIG_DRIVER_DM9000
# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300)
diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 4f6b640..83e05b3 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -131,6 +131,7 @@
#define CONFIG_SYS_NO_FLASH 1
/* Ethernet */
+#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x30000000
#define DM9000_IO CONFIG_DM9000_BASE
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
index 893c3d3..5556714 100644
--- a/include/configs/scb9328.h
+++ b/include/configs/scb9328.h
@@ -255,6 +255,7 @@
#define CONFIG_SYS_CS5U_VAL 0x00008400
#define CONFIG_SYS_CS5L_VAL 0x00000D03
+#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x16000000
#define DM9000_IO CONFIG_DM9000_BASE
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index 49045fd..bfa7157 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -278,6 +278,7 @@
#define CONFIG_SYS_MCIO0_VAL 0x00008407
#define CONFIG_SYS_MCIO1_VAL 0x0000c108
+#define CONFIG_NET_MULTI 1
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE 0x08000000
#define DM9000_IO CONFIG_DM9000_BASE
diff --git a/include/netdev.h b/include/netdev.h
index 5571070..aed5c4c 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -75,6 +75,7 @@ int tsi108_eth_initialize(bd_t *bis);
int uec_initialize(int index);
int uli526x_initialize(bd_t *bis);
int sh_eth_initialize(bd_t *bis);
+int dm9000_initialize(bd_t *bis);
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.