diff options
| -rw-r--r-- | board/freescale/ls1046ardb/README | 16 | ||||
| -rw-r--r-- | include/configs/ls1046a_common.h | 10 | ||||
| -rw-r--r-- | include/configs/ls1046aqds.h | 10 | ||||
| -rw-r--r-- | include/configs/ls1046ardb.h | 4 |
4 files changed, 20 insertions, 20 deletions
diff --git a/board/freescale/ls1046ardb/README b/board/freescale/ls1046ardb/README index 1ef7d47..a38c9d4 100644 --- a/board/freescale/ls1046ardb/README +++ b/board/freescale/ls1046ardb/README @@ -59,14 +59,14 @@ Start Address End Address Description Size QSPI flash map: Start Address End Address Description Size 0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB -0x00_4010_0000 - 0x00_401F_FFFF U-Boot 1MB -0x00_4020_0000 - 0x00_402F_FFFF U-Boot Env 1MB -0x00_4030_0000 - 0x00_403F_FFFF FMan ucode 1MB -0x00_4040_0000 - 0x00_404F_FFFF UEFI 1MB -0x00_4050_0000 - 0x00_406F_FFFF PPA 2MB -0x00_4070_0000 - 0x00_408F_FFFF Secure boot header - + bootscript 2MB -0x00_4090_0000 - 0x00_40FF_FFFF Reserved 7MB +0x00_4010_0000 - 0x00_402F_FFFF U-Boot 2MB +0x00_4030_0000 - 0x00_403F_FFFF U-Boot Env 1MB +0x00_4040_0000 - 0x00_405F_FFFF PPA 2MB +0x00_4060_0000 - 0x00_408F_FFFF Secure boot header + + bootscript 3MB +0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB +0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB +0x00_4098_0000 - 0x00_40FF_FFFF Reserved 6MB 0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB Booting Options diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 80f8dc2..47a544c 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -176,23 +176,23 @@ /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 #define CONFIG_ENV_SPI_MODE 0x03 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 0cf6010..5d2e819 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -447,20 +447,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 7161ee8..6f649a6 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -169,12 +169,12 @@ #if defined(CONFIG_SD_BOOT) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #endif |