summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/arm_cortexa8/mx51/soc.c2
-rw-r--r--board/davedenx/qong/qong.c20
-rw-r--r--board/freescale/mx51evk/mx51evk.c143
-rw-r--r--board/karo/tx25/tx25.c3
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/fsl_pmic.c200
-rw-r--r--drivers/rtc/mc13783-rtc.c72
-rw-r--r--drivers/spi/mxc_spi.c231
-rw-r--r--drivers/video/mx3fb.c47
-rw-r--r--include/configs/imx31_litekit.h19
-rw-r--r--include/configs/mx31ads.h8
-rw-r--r--include/configs/mx31pdk.h9
-rw-r--r--include/configs/mx51evk.h15
-rw-r--r--include/configs/qong.h16
-rw-r--r--include/fsl_pmic.h128
-rw-r--r--include/mc13892.h160
16 files changed, 967 insertions, 107 deletions
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/soc.c b/arch/arm/cpu/arm_cortexa8/mx51/soc.c
index 2a139b2..f22ebe9 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/soc.c
+++ b/arch/arm/cpu/arm_cortexa8/mx51/soc.c
@@ -67,7 +67,7 @@ int print_cpuinfo(void)
u32 cpurev;
cpurev = get_cpu_rev();
- printf("CPU: Freescale i.MX51 family %d.%dV at %d MHz\n",
+ printf("CPU: Freescale i.MX51 family rev%d.%d at %d MHz\n",
(cpurev & 0xF0) >> 4,
(cpurev & 0x0F) >> 4,
mxc_get_clock(MXC_ARM_CLK) / 1000000);
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index eb9218e..781333b 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -26,6 +26,7 @@
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
#include <nand.h>
+#include <fsl_pmic.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -128,6 +129,13 @@ int board_init (void)
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
+ /* setup pins for SPI (pmic) */
+ mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+ mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+ mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+ mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+ mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_QONG;
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
@@ -135,6 +143,18 @@ int board_init (void)
return 0;
}
+int board_late_init(void)
+{
+ u32 val;
+
+ /* Enable RTC battery */
+ val = pmic_reg_read(REG_POWER_CTL0);
+ pmic_reg_write(REG_POWER_CTL0, val | COINCHEN);
+ pmic_reg_write(REG_INT_STATUS1, RTCRSTI);
+
+ return 0;
+}
+
int checkboard (void)
{
printf("Board: DAVE/DENX Qong\n");
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index f0b7abc..75d642b 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -27,9 +27,12 @@
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <fsl_pmic.h>
+#include <mc13892.h>
#include "mx51evk.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -39,8 +42,8 @@ struct io_board_ctrl *mx51_io_board;
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
- {MMC_SDHC1_BASE_ADDR, 1, 1},
- {MMC_SDHC2_BASE_ADDR, 1, 1},
+ {MMC_SDHC1_BASE_ADDR, 1},
+ {MMC_SDHC2_BASE_ADDR, 1},
};
#endif
@@ -147,6 +150,130 @@ static void setup_iomux_fec(void)
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
}
+#ifdef CONFIG_MXC_SPI
+static void setup_iomux_spi(void)
+{
+ /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
+ mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
+
+ /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
+
+ /* de-select SS1 of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
+
+ /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
+
+ /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
+
+ /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
+}
+#endif
+
+static void power_init(void)
+{
+ unsigned int val;
+ unsigned int reg;
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+
+ /* Write needed to Power Gate 2 register */
+ val = pmic_reg_read(REG_POWER_MISC);
+ val &= ~PWGT2SPIEN;
+ pmic_reg_write(REG_POWER_MISC, val);
+
+ /* Write needed to update Charger 0 */
+ pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 |
+ ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 |
+ OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB);
+
+ /* power up the system first */
+ pmic_reg_write(REG_POWER_MISC, PWUP);
+
+ /* Set core voltage to 1.1V */
+ val = pmic_reg_read(REG_SW_0);
+ val = (val & (~0x1F)) | 0x14;
+ pmic_reg_write(REG_SW_0, val);
+
+ /* Setup VCC (SW2) to 1.25 */
+ val = pmic_reg_read(REG_SW_1);
+ val = (val & (~0x1F)) | 0x1A;
+ pmic_reg_write(REG_SW_1, val);
+
+ /* Setup 1V2_DIG1 (SW3) to 1.25 */
+ val = pmic_reg_read(REG_SW_2);
+ val = (val & (~0x1F)) | 0x1A;
+ pmic_reg_write(REG_SW_2, val);
+ udelay(50);
+
+ /* Raise the core frequency to 800MHz */
+ writel(0x0, &mxc_ccm->cacrr);
+
+ /* Set switchers in Auto in NORMAL mode & STANDBY mode */
+ /* Setup the switcher mode for SW1 & SW2*/
+ val = pmic_reg_read(REG_SW_4);
+ val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
+ (SWMODE_MASK << SWMODE2_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
+ pmic_reg_write(REG_SW_4, val);
+
+ /* Setup the switcher mode for SW3 & SW4 */
+ val = pmic_reg_read(REG_SW_5);
+ val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
+ (SWMODE_MASK << SWMODE4_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
+ pmic_reg_write(REG_SW_5, val);
+
+ /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
+ val = pmic_reg_read(REG_SETTING_0);
+ val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
+ val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
+ pmic_reg_write(REG_SETTING_0, val);
+
+ /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
+ val = pmic_reg_read(REG_SETTING_1);
+ val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
+ val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
+ pmic_reg_write(REG_SETTING_1, val);
+
+ /* Configure VGEN3 and VCAM regulators to use external PNP */
+ val = VGEN3CONFIG | VCAMCONFIG;
+ pmic_reg_write(REG_MODE_1, val);
+ udelay(200);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x0);
+ reg &= ~0x4000; /* Lower reset line */
+ writel(reg, GPIO2_BASE_ADDR + 0x0);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x4);
+ reg |= 0x4000; /* configure GPIO lines as output */
+ writel(reg, GPIO2_BASE_ADDR + 0x4);
+
+ /* Reset the ethernet controller over GPIO */
+ writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);
+
+ /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
+ VVIDEOEN | VAUDIOEN | VSDEN;
+ pmic_reg_write(REG_MODE_1, val);
+
+ udelay(500);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x0);
+ reg |= 0x4000;
+ writel(reg, GPIO2_BASE_ADDR + 0x0);
+}
+
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
@@ -284,9 +411,21 @@ int board_init(void)
setup_iomux_uart();
setup_iomux_fec();
+
return 0;
}
+#ifdef BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_MXC_SPI
+ setup_iomux_spi();
+ power_init();
+#endif
+ return 0;
+}
+#endif
+
int checkboard(void)
{
puts("Board: MX51EVK ");
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 4d6a96d..2608698 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -145,6 +145,9 @@ int board_init()
mx25_uart_init_pins();
#endif
+ /* board id for linux */
+ gd->bd->bi_arch_number = MACH_TYPE_TX25;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f6df60f..96aa331 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_LAW) += fsl_law.o
COBJS-$(CONFIG_NS87308) += ns87308.o
COBJS-$(CONFIG_STATUS_LED) += status_led.o
COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
+COBJS-$(CONFIG_FSL_PMIC) += fsl_pmic.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c
new file mode 100644
index 0000000..87f0aed
--- /dev/null
+++ b/drivers/misc/fsl_pmic.c
@@ -0,0 +1,200 @@
+/*
+ * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <spi.h>
+#include <asm/errno.h>
+#include <linux/types.h>
+#include <fsl_pmic.h>
+
+static struct spi_slave *slave;
+
+struct spi_slave *pmic_spi_probe(void)
+{
+ return spi_setup_slave(CONFIG_FSL_PMIC_BUS,
+ CONFIG_FSL_PMIC_CS,
+ CONFIG_FSL_PMIC_CLK,
+ CONFIG_FSL_PMIC_MODE);
+}
+
+void pmic_spi_free(struct spi_slave *slave)
+{
+ if (slave)
+ spi_free_slave(slave);
+}
+
+u32 pmic_reg(u32 reg, u32 val, u32 write)
+{
+ u32 pmic_tx, pmic_rx;
+
+ if (!slave) {
+ slave = pmic_spi_probe();
+
+ if (!slave)
+ return -1;
+ }
+
+ if (reg > 63 || write > 1) {
+ printf("<reg num> = %d is invalid. Should be less then 63\n",
+ reg);
+ return -1;
+ }
+
+ if (spi_claim_bus(slave))
+ return -1;
+
+ pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF);
+
+ if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+ SPI_XFER_BEGIN | SPI_XFER_END)) {
+ spi_release_bus(slave);
+ return -1;
+ }
+
+ if (write) {
+ pmic_tx &= ~(1 << 31);
+ if (spi_xfer(slave, 4 << 3, &pmic_tx, &pmic_rx,
+ SPI_XFER_BEGIN | SPI_XFER_END)) {
+ spi_release_bus(slave);
+ return -1;
+ }
+ }
+
+ spi_release_bus(slave);
+ return pmic_rx;
+}
+
+void pmic_reg_write(u32 reg, u32 value)
+{
+ pmic_reg(reg, value, 1);
+}
+
+u32 pmic_reg_read(u32 reg)
+{
+ return pmic_reg(reg, 0, 0);
+}
+
+void pmic_show_pmic_info(void)
+{
+ u32 rev_id;
+
+ rev_id = pmic_reg_read(REG_IDENTIFICATION);
+ printf("PMIC ID: 0x%08x [Rev: ", rev_id);
+ switch (rev_id & 0x1F) {
+ case 0x1:
+ puts("1.0");
+ break;
+ case 0x9:
+ puts("1.1");
+ break;
+ case 0xA:
+ puts("1.2");
+ break;
+ case 0x10:
+ puts("2.0");
+ break;
+ case 0x11:
+ puts("2.1");
+ break;
+ case 0x18:
+ puts("3.0");
+ break;
+ case 0x19:
+ puts("3.1");
+ break;
+ case 0x1A:
+ puts("3.2");
+ break;
+ case 0x2:
+ puts("3.2A");
+ break;
+ case 0x1B:
+ puts("3.3");
+ break;
+ case 0x1D:
+ puts("3.5");
+ break;
+ default:
+ puts("unknown");
+ break;
+ }
+ puts("]\n");
+}
+
+static void pmic_dump(int numregs)
+{
+ u32 val;
+ int i;
+
+ pmic_show_pmic_info();
+ for (i = 0; i < numregs; i++) {
+ val = pmic_reg_read(i);
+ if (!(i % 8))
+ printf ("\n0x%02x: ", i);
+ printf("%08x ", val);
+ }
+ puts("\n");
+}
+
+int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ char *cmd;
+ int nregs;
+ u32 val;
+
+ /* at least two arguments please */
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ cmd = argv[1];
+ if (strcmp(cmd, "dump") == 0) {
+ if (argc < 3) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+ nregs = simple_strtoul(argv[2], NULL, 16);
+ pmic_dump(nregs);
+ return 0;
+ }
+ if (strcmp(cmd, "write") == 0) {
+ if (argc < 4) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+ nregs = simple_strtoul(argv[2], NULL, 16);
+ val = simple_strtoul(argv[3], NULL, 16);
+ pmic_reg_write(nregs, val);
+ return 0;
+ }
+ /* No subcommand found */
+ return 1;
+}
+
+U_BOOT_CMD(
+ pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
+ "Freescale PMIC (Atlas)",
+ "dump [numregs] dump registers\n"
+ "pmic write <reg> <value> - write register"
+);
diff --git a/drivers/rtc/mc13783-rtc.c b/drivers/rtc/mc13783-rtc.c
index 416f50d..4e18f80 100644
--- a/drivers/rtc/mc13783-rtc.c
+++ b/drivers/rtc/mc13783-rtc.c
@@ -23,53 +23,30 @@
#include <common.h>
#include <rtc.h>
#include <spi.h>
-
-static struct spi_slave *slave;
+#include <fsl_pmic.h>
int rtc_get(struct rtc_time *rtc)
{
u32 day1, day2, time;
- u32 reg;
- int err, tim, i = 0;
-
- if (!slave) {
- /* FIXME: Verify the max SCK rate */
- slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
- CONFIG_MC13783_SPI_CS, 1000000,
- SPI_MODE_2 | SPI_CS_HIGH);
- if (!slave)
- return -1;
- }
-
- if (spi_claim_bus(slave))
- return -1;
+ int tim, i = 0;
do {
- reg = 0x2c000000;
- err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day1,
- SPI_XFER_BEGIN | SPI_XFER_END);
-
- if (err)
- return err;
-
- reg = 0x28000000;
- err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
- SPI_XFER_BEGIN | SPI_XFER_END);
+ day1 = pmic_reg_read(REG_RTC_DAY);
+ if (day1 < 0)
+ return -1;
- if (err)
- return err;
+ time = pmic_reg_read(REG_RTC_TIME);
+ if (time < 0)
+ return -1;
- reg = 0x2c000000;
- err = spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day2,
- SPI_XFER_BEGIN | SPI_XFER_END);
+ day2 = pmic_reg_read(REG_RTC_DAY);
+ if (day2 < 0)
+ return -1;
- if (err)
- return err;
} while (day1 != day2 && i++ < 3);
- spi_release_bus(slave);
-
tim = day1 * 86400 + time;
+
to_tm(tim, rtc);
rtc->tm_yday = 0;
@@ -80,34 +57,15 @@ int rtc_get(struct rtc_time *rtc)
int rtc_set(struct rtc_time *rtc)
{
- u32 time, day, reg;
-
- if (!slave) {
- /* FIXME: Verify the max SCK rate */
- slave = spi_setup_slave(CONFIG_MC13783_SPI_BUS,
- CONFIG_MC13783_SPI_CS, 1000000,
- SPI_MODE_2 | SPI_CS_HIGH);
- if (!slave)
- return -1;
- }
+ u32 time, day;
time = mktime(rtc->tm_year, rtc->tm_mon, rtc->tm_mday,
rtc->tm_hour, rtc->tm_min, rtc->tm_sec);
day = time / 86400;
time %= 86400;
- if (spi_claim_bus(slave))
- return -1;
-
- reg = 0x2c000000 | day | 0x80000000;
- spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&day,
- SPI_XFER_BEGIN | SPI_XFER_END);
-
- reg = 0x28000000 | time | 0x80000000;
- spi_xfer(slave, 32, (uchar *)&reg, (uchar *)&time,
- SPI_XFER_BEGIN | SPI_XFER_END);
-
- spi_release_bus(slave);
+ pmic_reg_write(REG_RTC_DAY, day);
+ pmic_reg_write(REG_RTC_TIME, time);
return 0;
}
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 3a45200..e15a63c 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -31,7 +31,7 @@
#error "i.MX27 CSPI not supported due to drastic differences in register definisions" \
"See linux mxc_spi driver from Freescale for details."
-#else
+#elif defined(CONFIG_MX31)
#include <asm/arch/mx31.h>
@@ -56,6 +56,9 @@
#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 24)
#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0x1f) << 8)
#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC (1 << 8)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPICTRL_MAXBITS 0x1f
#define MXC_CSPIPERIOD_32KHZ (1 << 15)
@@ -65,12 +68,63 @@ static unsigned long spi_bases[] = {
0x53f84000,
};
+#define OUT MX31_GPIO_DIRECTION_OUT
+#define mxc_gpio_direction mx31_gpio_direction
+#define mxc_gpio_set mx31_gpio_set
+#elif defined(CONFIG_MX51)
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/clock.h>
+
+#define MXC_CSPIRXDATA 0x00
+#define MXC_CSPITXDATA 0x04
+#define MXC_CSPICTRL 0x08
+#define MXC_CSPICON 0x0C
+#define MXC_CSPIINT 0x10
+#define MXC_CSPIDMA 0x14
+#define MXC_CSPISTAT 0x18
+#define MXC_CSPIPERIOD 0x1C
+#define MXC_CSPIRESET 0x00
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_PREDIV(x) (((x) & 0xF) << 12)
+#define MXC_CSPICTRL_POSTDIV(x) (((x) & 0xF) << 8)
+#define MXC_CSPICTRL_SELCHAN(x) (((x) & 0x3) << 18)
+#define MXC_CSPICTRL_MAXBITS 0xfff
+#define MXC_CSPICTRL_TC (1 << 7)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+
+/* Bit position inside CTRL register to be associated with SS */
+#define MXC_CSPICTRL_CHAN 18
+
+/* Bit position inside CON register to be associated with SS */
+#define MXC_CSPICON_POL 4
+#define MXC_CSPICON_PHA 0
+#define MXC_CSPICON_SSPOL 12
+
+static unsigned long spi_bases[] = {
+ CSPI1_BASE_ADDR,
+ CSPI2_BASE_ADDR,
+ CSPI3_BASE_ADDR,
+};
+#define mxc_gpio_direction(gpio, dir) (0)
+#define mxc_gpio_set(gpio, value) {}
+#define OUT 1
+#else
+#error "Unsupported architecture"
#endif
struct mxc_spi_slave {
struct spi_slave slave;
unsigned long base;
u32 ctrl_reg;
+#if defined(CONFIG_MX51)
+ u32 cfg_reg;
+#endif
int gpio;
};
@@ -89,34 +143,161 @@ static inline void reg_write(unsigned long addr, u32 val)
*(volatile unsigned long*)addr = val;
}
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ if (mxcs->gpio > 0)
+ mxc_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
+ if (mxcs->gpio > 0)
+ mxc_gpio_set(mxcs->gpio,
+ !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
+}
+
+#ifdef CONFIG_MX51
+static s32 spi_cfg(struct mxc_spi_slave *mxcs, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ u32 clk_src = mxc_get_clock(MXC_CSPI_CLK);
+ s32 pre_div = 0, post_div = 0, i, reg_ctrl, reg_config;
+ u32 ss_pol = 0, sclkpol = 0, sclkpha = 0;
+
+ if (max_hz == 0) {
+ printf("Error: desired clock is 0\n");
+ return -1;
+ }
+
+ reg_ctrl = reg_read(mxcs->base + MXC_CSPICTRL);
+
+ /* Reset spi */
+ reg_write(mxcs->base + MXC_CSPICTRL, 0);
+ reg_write(mxcs->base + MXC_CSPICTRL, (reg_ctrl | 0x1));
+
+ /*
+ * The following computation is taken directly from Freescale's code.
+ */
+ if (clk_src > max_hz) {
+ pre_div = clk_src / max_hz;
+ if (pre_div > 16) {
+ post_div = pre_div / 16;
+ pre_div = 15;
+ }
+ if (post_div != 0) {
+ for (i = 0; i < 16; i++) {
+ if ((1 << i) >= post_div)
+ break;
+ }
+ if (i == 16) {
+ printf("Error: no divider for the freq: %d\n",
+ max_hz);
+ return -1;
+ }
+ post_div = i;
+ }
+ }
+
+ debug("pre_div = %d, post_div=%d\n", pre_div, post_div);
+ reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_SELCHAN(3)) |
+ MXC_CSPICTRL_SELCHAN(cs);
+ reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_PREDIV(0x0F)) |
+ MXC_CSPICTRL_PREDIV(pre_div);
+ reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) |
+ MXC_CSPICTRL_POSTDIV(post_div);
+
+ /* always set to master mode */
+ reg_ctrl |= 1 << (cs + 4);
+
+ /* We need to disable SPI before changing registers */
+ reg_ctrl &= ~MXC_CSPICTRL_EN;
+
+ if (mode & SPI_CS_HIGH)
+ ss_pol = 1;
+
+ if (!(mode & SPI_CPOL))
+ sclkpol = 1;
+
+ if (mode & SPI_CPHA)
+ sclkpha = 1;
+
+ reg_config = reg_read(mxcs->base + MXC_CSPICON);
+
+ /*
+ * Configuration register setup
+ * The MX51 has support different setup for each SS
+ */
+ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_SSPOL))) |
+ (ss_pol << (cs + MXC_CSPICON_SSPOL));
+ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_POL))) |
+ (sclkpol << (cs + MXC_CSPICON_POL));
+ reg_config = (reg_config & ~(1 << (cs + MXC_CSPICON_PHA))) |
+ (sclkpha << (cs + MXC_CSPICON_PHA));
+
+ debug("reg_ctrl = 0x%x\n", reg_ctrl);
+ reg_write(mxcs->base + MXC_CSPICTRL, reg_ctrl);
+ debug("reg_config = 0x%x\n", reg_config);
+ reg_write(mxcs->base + MXC_CSPICON, reg_config);
+
+ /* save config register and control register */
+ mxcs->ctrl_reg = reg_ctrl;
+ mxcs->cfg_reg = reg_config;
+
+ /* clear interrupt reg */
+ reg_write(mxcs->base + MXC_CSPIINT, 0);
+ reg_write(mxcs->base + MXC_CSPISTAT,
+ MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+
+ return 0;
+}
+#endif
+
static u32 spi_xchg_single(struct spi_slave *slave, u32 data, int bitlen,
unsigned long flags)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
- unsigned int cfg_reg = reg_read(mxcs->base + MXC_CSPICTRL);
- mxcs->ctrl_reg = (mxcs->ctrl_reg & ~MXC_CSPICTRL_BITCOUNT(31)) |
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ mxcs->ctrl_reg = (mxcs->ctrl_reg &
+ ~MXC_CSPICTRL_BITCOUNT(MXC_CSPICTRL_MAXBITS)) |
MXC_CSPICTRL_BITCOUNT(bitlen - 1);
- if (cfg_reg != mxcs->ctrl_reg)
- reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg);
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_EN);
+#ifdef CONFIG_MX51
+ reg_write(mxcs->base + MXC_CSPICON, mxcs->cfg_reg);
+#endif
- if (mxcs->gpio > 0 && (flags & SPI_XFER_BEGIN))
- mx31_gpio_set(mxcs->gpio, mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL);
+ /* Clear interrupt register */
+ reg_write(mxcs->base + MXC_CSPISTAT,
+ MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+ debug("Sending SPI 0x%x\n", data);
reg_write(mxcs->base + MXC_CSPITXDATA, data);
- reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg | MXC_CSPICTRL_XCH);
+ /* FIFO is written, now starts the transfer setting the XCH bit */
+ reg_write(mxcs->base + MXC_CSPICTRL, mxcs->ctrl_reg |
+ MXC_CSPICTRL_EN | MXC_CSPICTRL_XCH);
- while (reg_read(mxcs->base + MXC_CSPICTRL) & MXC_CSPICTRL_XCH)
+ /* Wait until the TC (Transfer completed) bit is set */
+ while ((reg_read(mxcs->base + MXC_CSPISTAT) & MXC_CSPICTRL_TC) == 0)
;
- if (mxcs->gpio > 0 && (flags & SPI_XFER_END)) {
- mx31_gpio_set(mxcs->gpio,
- !(mxcs->ctrl_reg & MXC_CSPICTRL_SSPOL));
- }
+ /* Transfer completed, clear any pending request */
+ reg_write(mxcs->base + MXC_CSPISTAT,
+ MXC_CSPICTRL_TC | MXC_CSPICTRL_RXOVF);
+
+ data = reg_read(mxcs->base + MXC_CSPIRXDATA);
+ debug("SPI Rx: 0x%x\n", data);
+
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return data;
- return reg_read(mxcs->base + MXC_CSPIRXDATA);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
@@ -176,7 +357,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
if (cs > 3) {
mxcs->gpio = cs >> 8;
cs &= 3;
- ret = mx31_gpio_direction(mxcs->gpio, MX31_GPIO_DIRECTION_OUT);
+ ret = mxc_gpio_direction(mxcs->gpio, OUT);
if (ret) {
printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
return -EINVAL;
@@ -210,6 +391,20 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
cs = ret;
+ mxcs->slave.bus = bus;
+ mxcs->slave.cs = cs;
+ mxcs->base = spi_bases[bus];
+
+#ifdef CONFIG_MX51
+ /* Can be used for i.MX31 too ? */
+ ctrl_reg = 0;
+ ret = spi_cfg(mxcs, cs, max_hz, mode);
+ if (ret) {
+ printf("mxc_spi: cannot setup SPI controller\n");
+ free(mxcs);
+ return NULL;
+ }
+#else
ctrl_reg = MXC_CSPICTRL_CHIPSELECT(cs) |
MXC_CSPICTRL_BITCOUNT(31) |
MXC_CSPICTRL_DATARATE(7) | /* FIXME: calculate data rate */
@@ -222,12 +417,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
ctrl_reg |= MXC_CSPICTRL_POL;
if (mode & SPI_CS_HIGH)
ctrl_reg |= MXC_CSPICTRL_SSPOL;
-
- mxcs->slave.bus = bus;
- mxcs->slave.cs = cs;
- mxcs->base = spi_bases[bus];
mxcs->ctrl_reg = ctrl_reg;
-
+#endif
return &mxcs->slave;
}
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 99a595e..7f04b49 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -56,22 +56,7 @@ void lcd_panel_disable(void)
#define msleep(a) udelay(a * 1000)
-#ifndef CONFIG_DISPLAY_VBEST_VGG322403
-#define XRES 240
-#define YRES 320
-#define PANEL_TYPE IPU_PANEL_TFT
-#define PIXEL_CLK 185925
-#define PIXEL_FMT IPU_PIX_FMT_RGB666
-#define H_START_WIDTH 9 /* left_margin */
-#define H_SYNC_WIDTH 1 /* hsync_len */
-#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
-#define V_START_WIDTH 7 /* upper_margin */
-#define V_SYNC_WIDTH 1 /* vsync_len */
-#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
-#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
-#define IF_CONF 0
-#define IF_CLK_DIV 0x175
-#else /* Display Vbest VGG322403 */
+#if defined(CONFIG_DISPLAY_VBEST_VGG322403)
#define XRES 320
#define YRES 240
#define PANEL_TYPE IPU_PANEL_TFT
@@ -86,6 +71,36 @@ void lcd_panel_disable(void)
#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
#define IF_CONF 0
#define IF_CLK_DIV 0x175
+#elif defined(CONFIG_DISPLAY_COM57H5M10XRC)
+#define XRES 640
+#define YRES 480
+#define PANEL_TYPE IPU_PANEL_TFT
+#define PIXEL_CLK 40000
+#define PIXEL_FMT IPU_PIX_FMT_RGB666
+#define H_START_WIDTH 120 /* left_margin */
+#define H_SYNC_WIDTH 30 /* hsync_len */
+#define H_END_WIDTH (10 + 30) /* right_margin + hsync_len */
+#define V_START_WIDTH 35 /* upper_margin */
+#define V_SYNC_WIDTH 3 /* vsync_len */
+#define V_END_WIDTH (7 + 3) /* lower_margin + vsync_len */
+#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF 0
+#define IF_CLK_DIV 0x175
+#else
+#define XRES 240
+#define YRES 320
+#define PANEL_TYPE IPU_PANEL_TFT
+#define PIXEL_CLK 185925
+#define PIXEL_FMT IPU_PIX_FMT_RGB666
+#define H_START_WIDTH 9 /* left_margin */
+#define H_SYNC_WIDTH 1 /* hsync_len */
+#define H_END_WIDTH (16 + 1) /* right_margin + hsync_len */
+#define V_START_WIDTH 7 /* upper_margin */
+#define V_SYNC_WIDTH 1 /* vsync_len */
+#define V_END_WIDTH (9 + 1) /* lower_margin + vsync_len */
+#define SIG_POL (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
+#define IF_CONF 0
+#define IF_CLK_DIV 0x175
#endif
#define LCD_COLOR_IPU LCD_COLOR16
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 6131008..4904856 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -68,10 +68,13 @@
#define CONFIG_DEFAULT_SPI_BUS 1
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 1
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 1000000
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+
#define CONFIG_RTC_MC13783 1
-/* MC13783 connected to CSPI2 and SS0 */
-#define CONFIG_MC13783_SPI_BUS 1
-#define CONFIG_MC13783_SPI_CS 0
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
@@ -89,6 +92,7 @@
#define CONFIG_CMD_PING
#define CONFIG_CMD_SPI
#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NAND
#define CONFIG_BOOTDELAY 3
@@ -174,4 +178,13 @@
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor0"
+/*
+ * NAND flash
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
+#define CONFIG_MXC_NAND_HWECC
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index ec1c905..dedecd7 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -65,10 +65,12 @@
#define CONFIG_DEFAULT_SPI_BUS 1
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 1
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 1000000
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
-/* MC13783 connected to CSPI2 and SS0 */
-#define CONFIG_MC13783_SPI_BUS 1
-#define CONFIG_MC13783_SPI_CS 0
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index bee2f45..0414cc3 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -69,12 +69,13 @@
#define CONFIG_DEFAULT_SPI_BUS 1
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 1
+#define CONFIG_FSL_PMIC_CS 2
+#define CONFIG_FSL_PMIC_CLK 1000000
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
#define CONFIG_RTC_MC13783 1
-/* MC13783 connected to CSPI2 and SS2 */
-#define CONFIG_MC13783_SPI_BUS 1
-#define CONFIG_MC13783_SPI_CS 2
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 3626df7..86a4731 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -54,6 +54,8 @@
/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define BOARD_LATE_INIT
+
/*
* Hardware drivers
*/
@@ -61,6 +63,19 @@
#define CONFIG_SYS_MX51_UART1
/*
+ * SPI Configs
+ * */
+#define CONFIG_CMD_SPI
+
+#define CONFIG_MXC_SPI
+
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 0
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 2500000
+#define CONFIG_FSL_PMIC_MODE (SPI_CPOL | SPI_CS_HIGH)
+
+/*
* MMC Configs
* */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 1d63b33..100fa3f 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -54,6 +54,17 @@
#define CONFIG_MX31_GPIO
+#define CONFIG_MXC_SPI
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+#define CONFIG_RTC_MC13783
+
+#define CONFIG_FSL_PMIC
+#define CONFIG_FSL_PMIC_BUS 1
+#define CONFIG_FSL_PMIC_CS 0
+#define CONFIG_FSL_PMIC_CLK 100000
+#define CONFIG_FSL_PMIC_MODE (SPI_MODE_2 | SPI_CS_HIGH)
+
/* FPGA */
#define CONFIG_QONG_FPGA 1
#define CONFIG_FPGA_BASE (CS1_BASE)
@@ -73,7 +84,7 @@
#define CONFIG_SPLASH_SCREEN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
-#define CONFIG_DISPLAY_VBEST_VGG322403
+#define CONFIG_DISPLAY_COM57H5M10XRC
/*
* Reducing the ARP timeout from default 5 seconds to 200ms we speed up the
@@ -98,6 +109,9 @@
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_DATE
+#define BOARD_LATE_INIT
/*
* You can compile in a MAC address and your custom net settings by using
diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h
new file mode 100644
index 0000000..e3abde6
--- /dev/null
+++ b/include/fsl_pmic.h
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_PMIC_H__
+#define __FSL_PMIC_H__
+
+/*
+ * The registers of different PMIC has the same meaning
+ * but the bit positions of the fields can differ or
+ * some fields has a meaning only on some devices.
+ * You have to check with the internal SPI bitmap
+ * (see Freescale Documentation) to set the registers
+ * for the device you are using
+ */
+enum {
+ REG_INT_STATUS0 = 0,
+ REG_INT_MASK0,
+ REG_INT_SENSE0,
+ REG_INT_STATUS1,
+ REG_INT_MASK1,
+ REG_INT_SENSE1,
+ REG_PU_MODE_S,
+ REG_IDENTIFICATION,
+ REG_UNUSED0,
+ REG_ACC0,
+ REG_ACC1, /*10 */
+ REG_UNUSED1,
+ REG_UNUSED2,
+ REG_POWER_CTL0,
+ REG_POWER_CTL1,
+ REG_POWER_CTL2,
+ REG_REGEN_ASSIGN,
+ REG_UNUSED3,
+ REG_MEM_A,
+ REG_MEM_B,
+ REG_RTC_TIME, /*20 */
+ REG_RTC_ALARM,
+ REG_RTC_DAY,
+ REG_RTC_DAY_ALARM,
+ REG_SW_0,
+ REG_SW_1,
+ REG_SW_2,
+ REG_SW_3,
+ REG_SW_4,
+ REG_SW_5,
+ REG_SETTING_0, /*30 */
+ REG_SETTING_1,
+ REG_MODE_0,
+ REG_MODE_1,
+ REG_POWER_MISC,
+ REG_UNUSED4,
+ REG_UNUSED5,
+ REG_UNUSED6,
+ REG_UNUSED7,
+ REG_UNUSED8,
+ REG_UNUSED9, /*40 */
+ REG_UNUSED10,
+ REG_UNUSED11,
+ REG_ADC0,
+ REG_ADC1,
+ REG_ADC2,
+ REG_ADC3,
+ REG_ADC4,
+ REG_CHARGE,
+ REG_USB0,
+ REG_USB1, /*50 */
+ REG_LED_CTL0,
+ REG_LED_CTL1,
+ REG_LED_CTL2,
+ REG_LED_CTL3,
+ REG_UNUSED12,
+ REG_UNUSED13,
+ REG_TRIM0,
+ REG_TRIM1,
+ REG_TEST0,
+ REG_TEST1, /*60 */
+ REG_TEST2,
+ REG_TEST3,
+ REG_TEST4,
+};
+
+/* REG_POWER_MISC */
+#define GPO1EN (1 << 6)
+#define GPO1STBY (1 << 7)
+#define GPO2EN (1 << 8)
+#define GPO2STBY (1 << 9)
+#define GPO3EN (1 << 10)
+#define GPO3STBY (1 << 11)
+#define GPO4EN (1 << 12)
+#define GPO4STBY (1 << 13)
+#define PWGT1SPIEN (1 << 15)
+#define PWGT2SPIEN (1 << 16)
+#define PWUP (1 << 21)
+
+/* Power Control 0 */
+#define COINCHEN (1 << 23)
+#define BATTDETEN (1 << 19)
+
+/* Interrupt status 1 */
+#define RTCRSTI (1 << 7)
+
+void pmic_show_pmic_info(void);
+void pmic_reg_write(u32 reg, u32 value);
+u32 pmic_reg_read(u32 reg);
+
+#endif
diff --git a/include/mc13892.h b/include/mc13892.h
new file mode 100644
index 0000000..b291757
--- /dev/null
+++ b/include/mc13892.h
@@ -0,0 +1,160 @@
+/*
+ * (C) Copyright 2010
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __MC13892_H__
+#define __MC13892_H__
+
+/* REG_CHARGE */
+
+#define VCHRG0 0
+#define VCHRG1 (1 << 1)
+#define VCHRG2 (1 << 2)
+#define ICHRG0 (1 << 3)
+#define ICHRG1 (1 << 4)
+#define ICHRG2 (1 << 5)
+#define ICHRG3 (1 << 6)
+#define ICHRGTR0 (1 << 7)
+#define ICHRGTR1 (1 << 8)
+#define ICHRGTR2 (1 << 9)
+#define FETOVRD (1 << 10)
+#define FETCTRL (1 << 11)
+#define RVRSMODE (1 << 13)
+#define OVCTRL0 (1 << 15)
+#define OVCTRL1 (1 << 16)
+#define UCHEN (1 << 17)
+#define CHRGLEDEN (1 << 18)
+#define CHRGRAWPDEN (1 << 19)
+#define CHGRESTART (1 << 20)
+#define CHGAUTOB (1 << 21)
+#define CYCLB (1 << 22)
+#define CHGAUTOVIB (1 << 23)
+
+/* REG_SETTING_0/1 */
+#define VO_1_20V 0
+#define VO_1_30V 1
+#define VO_1_50V 2
+#define VO_1_80V 3
+#define VO_1_10V 4
+#define VO_2_00V 5
+#define VO_2_77V 6
+#define VO_2_40V 7
+
+#define VIOL 2
+#define VDIG 4
+#define VGEN 6
+
+/* SWxMode for Normal/Standby Mode */
+#define SWMODE_OFF_OFF 0
+#define SWMODE_PWM_OFF 1
+#define SWMODE_PWMPS_OFF 2
+#define SWMODE_PFM_OFF 3
+#define SWMODE_AUTO_OFF 4
+#define SWMODE_PWM_PWM 5
+#define SWMODE_PWM_AUTO 6
+#define SWMODE_AUTO_AUTO 8
+#define SWMODE_PWM_PWMPS 9
+#define SWMODE_PWMS_PWMPS 10
+#define SWMODE_PWMS_AUTO 11
+#define SWMODE_AUTO_PFM 12
+#define SWMODE_PWM_PFM 13
+#define SWMODE_PWMS_PFM 14
+#define SWMODE_PFM_PFM 15
+#define SWMODE_MASK 0x0F
+
+#define SWMODE1_SHIFT 0
+#define SWMODE2_SHIFT 10
+#define SWMODE3_SHIFT 0
+#define SWMODE4_SHIFT 8
+
+/* Fields in REG_SETTING_1 */
+#define VVIDEO_2_7 (0 << 2)
+#define VVIDEO_2_775 (1 << 2)
+#define VVIDEO_2_5 (2 << 2)
+#define VVIDEO_2_6 (3 << 2)
+#define VVIDEO_MASK (3 << 2)
+#define VAUDIO_2_3 (0 << 4)
+#define VAUDIO_2_5 (1 << 4)
+#define VAUDIO_2_775 (2 << 4)
+#define VAUDIO_3_0 (3 << 4)
+#define VAUDIO_MASK (3 << 4)
+#define VSD_1_8 (0 << 6)
+#define VSD_2_0 (1 << 6)
+#define VSD_2_6 (2 << 6)
+#define VSD_2_7 (3 << 6)
+#define VSD_2_8 (4 << 6)
+#define VSD_2_9 (5 << 6)
+#define VSD_3_0 (6 << 6)
+#define VSD_3_15 (7 << 6)
+#define VSD_MASK (7 << 6)
+#define VGEN1_1_2 0
+#define VGEN1_1_5 1
+#define VGEN1_2_775 2
+#define VGEN1_3_15 3
+#define VGEN1_MASK 3
+#define VGEN2_1_2 (0 << 6)
+#define VGEN2_1_5 (1 << 6)
+#define VGEN2_1_6 (2 << 6)
+#define VGEN2_1_8 (3 << 6)
+#define VGEN2_2_7 (4 << 6)
+#define VGEN2_2_8 (5 << 6)
+#define VGEN2_3_0 (6 << 6)
+#define VGEN2_3_15 (7 << 6)
+#define VGEN2_MASK (7 << 6)
+
+/* Fields in REG_SETTING_1 */
+#define VGEN3_1_8 (0 << 14)
+#define VGEN3_2_9 (1 << 14)
+#define VGEN3_MASK (1 << 14)
+#define VDIG_1_05 (0 << 4)
+#define VDIG_1_25 (1 << 4)
+#define VDIG_1_65 (2 << 4)
+#define VDIG_1_8 (3 << 4)
+#define VDIG_MASK (3 << 4)
+#define VCAM_2_5 (0 << 16)
+#define VCAM_2_6 (1 << 16)
+#define VCAM_2_75 (2 << 16)
+#define VCAM_3_0 (3 << 16)
+#define VCAM_MASK (3 << 16)
+
+/* Reg Mode 1 */
+#define VGEN3EN (1 << 0)
+#define VGEN3STBY (1 << 1)
+#define VGEN3MODE (1 << 2)
+#define VGEN3CONFIG (1 << 3)
+#define VCAMEN (1 << 6)
+#define VCAMSTBY (1 << 7)
+#define VCAMMODE (1 << 8)
+#define VCAMCONFIG (1 << 9)
+#define VVIDEOEN (1 << 12)
+#define VIDEOSTBY (1 << 13)
+#define VVIDEOMODE (1 << 14)
+#define VAUDIOEN (1 << 15)
+#define VAUDIOSTBY (1 << 16)
+#define VSDEN (1 << 18)
+#define VSDSTBY (1 << 19)
+#define VSDMODE (1 << 20)
+
+#endif