summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/cpu/armv7/sunxi/board.c8
-rw-r--r--board/sunxi/Kconfig16
-rw-r--r--include/configs/sunxi-common.h9
3 files changed, 0 insertions, 33 deletions
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index e6730c0..75ce7b5 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -120,13 +120,6 @@ void s_init(void)
*/
u32 spl_boot_device(void)
{
-#ifdef CONFIG_SPL_FEL
- /*
- * This is the legacy compile time configuration for a special FEL
- * enabled build. It has many restrictions and can only boot over USB.
- */
- return BOOT_DEVICE_BOARD;
-#else
/*
* When booting from the SD card, the "eGON.BT0" signature is expected
* to be found in memory at the address 0x0004 (see the "mksunxiboot"
@@ -147,7 +140,6 @@ u32 spl_boot_device(void)
return BOOT_DEVICE_MMC1;
else
return BOOT_DEVICE_BOARD;
-#endif
}
/* No confirmation data available in SPL yet. Hardcode bootmode */
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index a6bbf6e..ca805e4 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -194,24 +194,8 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
-config SPL_FEL
- bool "SPL/FEL mode support"
- depends on SPL
- default n
- help
- This enables support for Fast Early Loader (FEL) mode. This
- allows U-Boot to be loaded to the board over USB by the on-chip
- boot rom. U-Boot should be sent in two parts: SPL first, with
- 'fel write 0x2000 u-boot-spl.bin; fel exe 0x2000' then U-Boot with
- 'fel write 0x4a000000 u-boot.bin; fel exe 0x4a000000'. This option
- shrinks the amount of SRAM available to SPL, so only enable it if
- you need FEL. Note that enabling this option only allows FEL to be
- used; it is still possible to boot U-Boot from boot media. U-Boot
- SPL detects when it is being loaded using FEL.
-
config UART0_PORT_F
bool "UART0 on MicroSD breakout board"
- depends on SPL_FEL
default n
---help---
Repurpose the SD card slot for getting access to the UART0 serial
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index d829899..5dd2480 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -162,13 +162,6 @@
#define CONFIG_SPL_BOARD_LOAD_IMAGE
-#ifdef CONFIG_SPL_FEL
-
-#define CONFIG_SPL_TEXT_BASE 0x2000
-#define CONFIG_SPL_MAX_SIZE 0x4000 /* 16 KiB */
-
-#else /* CONFIG_SPL */
-
#define CONFIG_SPL_BSS_START_ADDR 0x4ff80000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KiB */
@@ -186,8 +179,6 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 80 /* 40KiB */
#define CONFIG_SPL_PAD_TO 32768 /* decimal for 'dd' */
-#endif /* CONFIG_SPL */
-
/* end of 32 KiB in sram */
#define LOW_LEVEL_SRAM_STACK 0x00008000 /* End of sram */
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK