diff options
305 files changed, 8271 insertions, 15424 deletions
@@ -80,5 +80,11 @@ cscope.* /ctags /etags +# gnu global files +GPATH +GRTAGS +GSYMS +GTAGS + # spl ais files /spl/*.ais diff --git a/MAINTAINERS b/MAINTAINERS index 0e0f203..14075af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1086,9 +1086,19 @@ Unknown / orphaned boards: # Board CPU # ######################################################################### -Graeme Russ <graeme.russ@gmail.com> +Simon Glass <sjg@chromium.org> - eNET AMD SC520 + chromebook-x86 Coreboot runs first, then U-Boot + Supports Intel Sandy Bridge / Ivy Bridge so far + + Chromebooks for x86, including: + Samsung Series 5 Chromebook + Acer AC700 Chromebook + Acer C7 Chromebook + Samsung Chromebook 550 + HP Pavillion Chromebook + Acer C710 Chromebook + Chromebook Pixel ######################################################################### # MIPS Systems: # @@ -1354,5 +1364,16 @@ Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> openrisc-generic OpenRISC ######################################################################### +# Sandbox: # +# # +# Maintainer Name, Email Address # +# Board CPU # +######################################################################### + +Simon Glass <sjg@chromium.org> + + sandbox sandbox + +######################################################################### # End of MAINTAINERS list # ######################################################################### @@ -268,12 +268,6 @@ LIST_8xx="$(boards_by_cpu mpc8xx)" LIST_4xx="$(boards_by_cpu ppc4xx)" ######################################################################### -## MPC8220 Systems -######################################################################### - -LIST_8220="$(boards_by_cpu mpc8220)" - -######################################################################### ## MPC824x Systems ######################################################################### @@ -324,7 +318,6 @@ LIST_powerpc=" \ ${LIST_512x} \ ${LIST_5xxx} \ ${LIST_8xx} \ - ${LIST_8220} \ ${LIST_824x} \ ${LIST_8260} \ ${LIST_83xx} \ @@ -201,7 +201,6 @@ Directory Hierarchy: /mpc5xx Files specific to Freescale MPC5xx CPUs /mpc5xxx Files specific to Freescale MPC5xxx CPUs /mpc8xx Files specific to Freescale MPC8xx CPUs - /mpc8220 Files specific to Freescale MPC8220 CPUs /mpc824x Files specific to Freescale MPC824x CPUs /mpc8260 Files specific to Freescale MPC8260 CPUs /mpc85xx Files specific to Freescale MPC85xx CPUs @@ -899,6 +898,7 @@ The following options need to be configured: CONFIG_CMD_SF * Read/write/erase SPI NOR flash CONFIG_CMD_SHA1SUM print sha1 memory digest (requires CONFIG_CMD_MEMORY) + CONFIG_CMD_SOFTSWITCH * Soft switch setting command for BF60x CONFIG_CMD_SOURCE "source" command Support CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode @@ -2997,6 +2997,12 @@ FIT uImage format: use an arch-specific makefile fragment instead, for example if more than one image needs to be produced. + CONFIG_FIT_SPL_PRINT + Printing information about a FIT image adds quite a bit of + code to SPL. So this is normally disabled in SPL. Use this + option to re-enable it. This will affect the output of the + bootm command when booting a FIT image. + Modem Support: -------------- @@ -5062,7 +5068,7 @@ On some platforms, it's possible to boot Linux zImage. This is done using the "bootz" command. The syntax of "bootz" command is the same as the syntax of "bootm" command. -Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply +Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply kernel with raw initrd images. The syntax is slightly different, the address of the initrd must be augmented by it's size, in the following format: "<initrd addres>:<initrd size>". diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c index a3d981f..ceb1271 100644 --- a/api/api_platform-powerpc.c +++ b/api/api_platform-powerpc.c @@ -55,8 +55,6 @@ int platform_sys_info(struct sys_info *si) #define bi_bar bi_mbar_base #elif defined(CONFIG_MPC83xx) #define bi_bar bi_immrbar -#elif defined(CONFIG_MPC8220) -#define bi_bar bi_mbar_base #endif #if defined(bi_bar) diff --git a/arch/arm/include/asm/bootm.h b/arch/arm/include/asm/bootm.h index db2ff94..2c4fa19 100644 --- a/arch/arm/include/asm/bootm.h +++ b/arch/arm/include/asm/bootm.h @@ -1,4 +1,7 @@ -/* Copyright (C) 2011 +/* + * Copyright (c) 2013, Google Inc. + * + * Copyright (C) 2011 * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> * * This program is free software; you can redistribute it and/or modify @@ -19,8 +22,55 @@ #ifndef ARM_BOOTM_H #define ARM_BOOTM_H -#ifdef CONFIG_USB_DEVICE extern void udc_disconnect(void); + +#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ + defined(CONFIG_CMDLINE_TAG) || \ + defined(CONFIG_INITRD_TAG) || \ + defined(CONFIG_SERIAL_TAG) || \ + defined(CONFIG_REVISION_TAG) +# define BOOTM_ENABLE_TAGS 1 +#else +# define BOOTM_ENABLE_TAGS 0 +#endif + +#ifdef CONFIG_SETUP_MEMORY_TAGS +# define BOOTM_ENABLE_MEMORY_TAGS 1 +#else +# define BOOTM_ENABLE_MEMORY_TAGS 0 +#endif + +#ifdef CONFIG_CMDLINE_TAG + #define BOOTM_ENABLE_CMDLINE_TAG 1 +#else + #define BOOTM_ENABLE_CMDLINE_TAG 0 +#endif + +#ifdef CONFIG_INITRD_TAG + #define BOOTM_ENABLE_INITRD_TAG 1 +#else + #define BOOTM_ENABLE_INITRD_TAG 0 +#endif + +#ifdef CONFIG_SERIAL_TAG + #define BOOTM_ENABLE_SERIAL_TAG 1 +void get_board_serial(struct tag_serialnr *serialnr); +#else + #define BOOTM_ENABLE_SERIAL_TAG 0 +static inline void get_board_serial(struct tag_serialnr *serialnr) +{ +} +#endif + +#ifdef CONFIG_REVISION_TAG + #define BOOTM_ENABLE_REVISION_TAG 1 +u32 get_board_rev(void); +#else + #define BOOTM_ENABLE_REVISION_TAG 0 +static inline u32 get_board_rev(void) +{ + return 0; +} #endif #endif diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index f16861a..c01eef3 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -54,8 +54,6 @@ int arch_early_init_r(void); int board_init(void); int dram_init (void); void dram_init_banksize (void); -void setup_serial_tag (struct tag **params); -void setup_revision_tag (struct tag **params); /* cpu/.../interrupt.c */ int arch_interrupt_init (void); diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 6ae161a..5b2cb61 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -45,6 +45,7 @@ endif COBJS-y += bss.o COBJS-y += bootm.o +COBJS-$(CONFIG_OF_LIBFDT) += bootm-fdt.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o diff --git a/board/sorcery/sorcery.c b/arch/arm/lib/bootm-fdt.c index 90d4298..93888f8 100644 --- a/board/sorcery/sorcery.c +++ b/arch/arm/lib/bootm-fdt.c @@ -1,6 +1,16 @@ /* - * (C) Copyright 2004, Freescale Inc. - * TsiChung Liew, Tsi-Chung.Liew@freescale.com + * Copyright (c) 2013, Google Inc. + * + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * - Added prep subcommand support + * - Reorganized source - modeled after powerpc version + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) * * See file CREDITS for list of people who contributed to this * project. @@ -22,47 +32,21 @@ */ #include <common.h> -#include <mpc8220.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <pci.h> -#include <netdev.h> - -phys_size_t initdram (int board_type) -{ - ulong size; - - size = dramSetup (); +#include <fdt_support.h> - return get_ram_size(CONFIG_SYS_SDRAM_BASE, size); -} +DECLARE_GLOBAL_DATA_PTR; -int checkboard (void) +int arch_fixup_memory_node(void *blob) { - puts ("Board: Sorcery-C MPC8220\n"); - - return 0; -} - -#if defined(CONFIG_PCI) -/* - * Initialize PCI devices, report devices found. - */ -static struct pci_controller hose; + bd_t *bd = gd->bd; + int bank; + u64 start[CONFIG_NR_DRAM_BANKS]; + u64 size[CONFIG_NR_DRAM_BANKS]; -#endif /* CONFIG_PCI */ + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + start[bank] = bd->bi_dram[bank].start; + size[bank] = bd->bi_dram[bank].size; + } -void pci_init_board (void) -{ -#ifdef CONFIG_PCI - extern void pci_mpc8220_init (struct pci_controller *hose); - pci_mpc8220_init (&hose); -#endif /* CONFIG_PCI */ -} - -int board_eth_init(bd_t *bis) -{ - /* Initialize built-in FEC first */ - cpu_eth_init(bis); - return pci_eth_init(bis); + return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); } diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index f3b30c5..1b6e0ac 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -22,7 +22,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ #include <common.h> @@ -37,13 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static struct tag *params; -#endif static ulong get_sp(void) { @@ -75,23 +68,6 @@ void arch_lmb_reserve(struct lmb *lmb) gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp); } -#ifdef CONFIG_OF_LIBFDT -static int fixup_memory_node(void *blob) -{ - bd_t *bd = gd->bd; - int bank; - u64 start[CONFIG_NR_DRAM_BANKS]; - u64 size[CONFIG_NR_DRAM_BANKS]; - - for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { - start[bank] = bd->bi_dram[bank].start; - size[bank] = bd->bi_dram[bank].size; - } - - return fdt_fixup_memory_banks(blob, start, size, CONFIG_NR_DRAM_BANKS); -} -#endif - static void announce_and_cleanup(void) { printf("\nStarting kernel ...\n\n"); @@ -109,11 +85,6 @@ static void announce_and_cleanup(void) cleanup_before_linux(); } -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static void setup_start_tag (bd_t *bd) { params = (struct tag *)bd->bi_boot_params; @@ -127,9 +98,7 @@ static void setup_start_tag (bd_t *bd) params = tag_next (params); } -#endif -#ifdef CONFIG_SETUP_MEMORY_TAGS static void setup_memory_tags(bd_t *bd) { int i; @@ -144,9 +113,7 @@ static void setup_memory_tags(bd_t *bd) params = tag_next (params); } } -#endif -#ifdef CONFIG_CMDLINE_TAG static void setup_commandline_tag(bd_t *bd, char *commandline) { char *p; @@ -171,9 +138,7 @@ static void setup_commandline_tag(bd_t *bd, char *commandline) params = tag_next (params); } -#endif -#ifdef CONFIG_INITRD_TAG static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end) { /* an ATAG_INITRD node tells the kernel where the compressed @@ -187,14 +152,11 @@ static void setup_initrd_tag(bd_t *bd, ulong initrd_start, ulong initrd_end) params = tag_next (params); } -#endif -#ifdef CONFIG_SERIAL_TAG -void setup_serial_tag(struct tag **tmp) +static void setup_serial_tag(struct tag **tmp) { struct tag *params = *tmp; struct tag_serialnr serialnr; - void get_board_serial(struct tag_serialnr *serialnr); get_board_serial(&serialnr); params->hdr.tag = ATAG_SERIAL; @@ -204,13 +166,10 @@ void setup_serial_tag(struct tag **tmp) params = tag_next (params); *tmp = params; } -#endif -#ifdef CONFIG_REVISION_TAG -void setup_revision_tag(struct tag **in_params) +static void setup_revision_tag(struct tag **in_params) { u32 rev = 0; - u32 get_board_rev(void); rev = get_board_rev(); params->hdr.tag = ATAG_REVISION; @@ -218,106 +177,50 @@ void setup_revision_tag(struct tag **in_params) params->u.revision.rev = rev; params = tag_next (params); } -#endif -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) static void setup_end_tag(bd_t *bd) { params->hdr.tag = ATAG_NONE; params->hdr.size = 0; } -#endif - -#ifdef CONFIG_OF_LIBFDT -static int create_fdt(bootm_headers_t *images) -{ - ulong of_size = images->ft_len; - char **of_flat_tree = &images->ft_addr; - ulong *initrd_start = &images->initrd_start; - ulong *initrd_end = &images->initrd_end; - struct lmb *lmb = &images->lmb; - ulong rd_len; - int ret; - - debug("using: FDT\n"); - - boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); - - rd_len = images->rd_end - images->rd_start; - ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, - initrd_start, initrd_end); - if (ret) - return ret; - - ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); - if (ret) - return ret; - - fdt_chosen(*of_flat_tree, 1); - fixup_memory_node(*of_flat_tree); - fdt_fixup_ethernet(*of_flat_tree); - fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); -#ifdef CONFIG_OF_BOARD_SETUP - ft_board_setup(*of_flat_tree, gd->bd); -#endif - - return 0; -} -#endif __weak void setup_board_tags(struct tag **in_params) {} /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { -#ifdef CONFIG_CMDLINE_TAG char *commandline = getenv("bootargs"); -#endif + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { #ifdef CONFIG_OF_LIBFDT - if (images->ft_len) { debug("using: FDT\n"); - if (create_fdt(images)) { + if (image_setup_linux(images)) { printf("FDT creation failed! hanging..."); hang(); } - } else #endif - { -#if defined(CONFIG_SETUP_MEMORY_TAGS) || \ - defined(CONFIG_CMDLINE_TAG) || \ - defined(CONFIG_INITRD_TAG) || \ - defined(CONFIG_SERIAL_TAG) || \ - defined(CONFIG_REVISION_TAG) + } else if (BOOTM_ENABLE_TAGS) { debug("using: ATAGS\n"); setup_start_tag(gd->bd); -#ifdef CONFIG_SERIAL_TAG - setup_serial_tag(¶ms); -#endif -#ifdef CONFIG_CMDLINE_TAG - setup_commandline_tag(gd->bd, commandline); -#endif -#ifdef CONFIG_REVISION_TAG - setup_revision_tag(¶ms); -#endif -#ifdef CONFIG_SETUP_MEMORY_TAGS - setup_memory_tags(gd->bd); -#endif -#ifdef CONFIG_INITRD_TAG - if (images->rd_start && images->rd_end) - setup_initrd_tag(gd->bd, images->rd_start, - images->rd_end); -#endif + if (BOOTM_ENABLE_SERIAL_TAG) + setup_serial_tag(¶ms); + if (BOOTM_ENABLE_CMDLINE_TAG) + setup_commandline_tag(gd->bd, commandline); + if (BOOTM_ENABLE_REVISION_TAG) + setup_revision_tag(¶ms); + if (BOOTM_ENABLE_MEMORY_TAGS) + setup_memory_tags(gd->bd); + if (BOOTM_ENABLE_INITRD_TAG) { + if (images->rd_start && images->rd_end) { + setup_initrd_tag(gd->bd, images->rd_start, + images->rd_end); + } + } setup_board_tags(¶ms); setup_end_tag(gd->bd); -#else /* all tags */ + } else { printf("FDT and ATAGS support not compiled in - hanging\n"); hang(); -#endif /* all tags */ } } @@ -342,11 +245,9 @@ static void boot_jump_linux(bootm_headers_t *images) bootstage_mark(BOOTSTAGE_ID_RUN_OS); announce_and_cleanup(); -#ifdef CONFIG_OF_LIBFDT - if (images->ft_len) + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) r2 = (unsigned long)images->ft_addr; else -#endif r2 = gd->bd->bi_boot_params; kernel_entry(0, machid, r2); diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index ccf862a..2e79e98 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -116,7 +116,7 @@ static int display_banner (void) printf ("\n\n%s\n\n", version_string); printf ("U-Boot code: %08lx -> %08lx data: %08lx -> %08lx\n", (unsigned long)_text, (unsigned long)_etext, - (unsigned long)_data, (unsigned long)__bss_end); + (unsigned long)_data, (unsigned long)(&__bss_end)); return 0; } @@ -183,7 +183,7 @@ void board_init_f(ulong board_type) * - stack */ addr = CONFIG_SYS_SDRAM_BASE + sdram_size; - monitor_len = (char *)__bss_end - _text; + monitor_len = (char *)(&__bss_end) - _text; /* * Reserve memory for u-boot code, data and bss. diff --git a/arch/blackfin/cpu/Makefile b/arch/blackfin/cpu/Makefile index 0a72ec5..1421cb2 100644 --- a/arch/blackfin/cpu/Makefile +++ b/arch/blackfin/cpu/Makefile @@ -18,14 +18,12 @@ CEXTRA := initcode.o SEXTRA := start.o SOBJS := interrupt.o cache.o COBJS-y += cpu.o -COBJS-y += gpio.o +COBJS-$(CONFIG_ADI_GPIO1) += gpio.o COBJS-y += interrupts.o COBJS-$(CONFIG_JTAG_CONSOLE) += jtag-console.o COBJS-y += os_log.o COBJS-y += reset.o -COBJS-y += serial.o COBJS-y += traps.o -COBJS-$(CONFIG_HW_WATCHDOG) += watchdog.o SRCS := $(SEXTRA:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS)) diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 0be2e2b..218f57e 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -16,13 +16,39 @@ #include <asm/mach-common/bits/core.h> #include <asm/mach-common/bits/ebiu.h> #include <asm/mach-common/bits/trace.h> +#include <asm/serial.h> #include "cpu.h" -#include "serial.h" #include "initcode.h" ulong bfin_poweron_retx; +#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START) +void bfin_core1_start(void) +{ +#ifdef BF561_FAMILY + /* Enable core 1 */ + bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020); +#else + /* Enable core 1 */ + bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START); + bfin_write32(RCU0_CRCTL, 0); + + bfin_write32(RCU0_CRCTL, 0x2); + + /* Check if core 1 starts */ + while (!(bfin_read32(RCU0_CRSTAT) & 0x2)) + continue; + + bfin_write32(RCU0_CRCTL, 0); + + /* flag to notify cces core 1 application */ + bfin_write32(SDU0_MSG_SET, (1 << 19)); +#endif +} +#endif + +__attribute__ ((__noreturn__)) void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) { #ifndef CONFIG_BFIN_BOOTROM_USES_EVT1 @@ -72,6 +98,10 @@ void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) # endif #endif +#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START) + bfin_core1_start(); +#endif + serial_early_puts("Board init flash\n"); board_init_f(bootflag); } diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index f684be5..f74a0b7 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -1,5 +1,6 @@ /* - * GPIO Abstraction Layer + * ADI GPIO1 Abstraction Layer + * Support BF50x, BF51x, BF52x, BF53x and BF561 only. * * Copyright 2006-2010 Analog Devices Inc. * @@ -55,25 +56,6 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *) FIO0_FLAG_D, (struct gpio_port_t *) FIO1_FLAG_D, (struct gpio_port_t *) FIO2_FLAG_D, -#elif defined(CONFIG_BF54x) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, - (struct gpio_port_t *)PORTH_FER, - (struct gpio_port_t *)PORTI_FER, - (struct gpio_port_t *)PORTJ_FER, -#elif defined(CONFIG_BF60x) - (struct gpio_port_t *)PORTA_FER, - (struct gpio_port_t *)PORTB_FER, - (struct gpio_port_t *)PORTC_FER, - (struct gpio_port_t *)PORTD_FER, - (struct gpio_port_t *)PORTE_FER, - (struct gpio_port_t *)PORTF_FER, - (struct gpio_port_t *)PORTG_FER, #else # error no gpio arrays defined #endif @@ -174,12 +156,6 @@ DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES)); inline int check_gpio(unsigned gpio) { -#if defined(CONFIG_BF54x) - if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 - || gpio == GPIO_PH14 || gpio == GPIO_PH15 - || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) - return -EINVAL; -#endif if (gpio >= MAX_BLACKFIN_GPIOS) return -EINVAL; return 0; @@ -218,18 +194,6 @@ static void port_setup(unsigned gpio, unsigned short usage) else *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); SSYNC(); -#elif defined(CONFIG_BF54x) - if (usage == GPIO_USAGE) - gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); - SSYNC(); -#elif defined(CONFIG_BF60x) - if (usage == GPIO_USAGE) - gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio); - else - gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio); - SSYNC(); #endif } @@ -304,30 +268,6 @@ static void portmux_setup(unsigned short per) } } } -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) -inline void portmux_setup(unsigned short per) -{ - u32 pmux; - u16 ident = P_IDENT(per); - u16 function = P_FUNCT2MUX(per); - - pmux = gpio_array[gpio_bank(ident)]->port_mux; - - pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); - pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); - - gpio_array[gpio_bank(ident)]->port_mux = pmux; -} - -inline u16 get_portmux(unsigned short per) -{ - u32 pmux; - u16 ident = P_IDENT(per); - - pmux = gpio_array[gpio_bank(ident)]->port_mux; - - return (pmux >> (2 * gpio_sub_n(ident)) & 0x3); -} #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) inline void portmux_setup(unsigned short per) { @@ -344,7 +284,6 @@ inline void portmux_setup(unsigned short per) # define portmux_setup(...) do { } while (0) #endif -#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -491,15 +430,6 @@ GET_GPIO_P(both) GET_GPIO_P(maska) GET_GPIO_P(maskb) -#else /* CONFIG_BF54x */ - -unsigned short get_gpio_dir(unsigned gpio) -{ - return (0x01 & (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio))); -} - -#endif /* CONFIG_BF54x */ - /*********************************************************** * * FUNCTIONS: Blackfin Peripheral Resource Allocation @@ -548,11 +478,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { -#else if (!(per & P_MAYSHARE)) { -#endif /* * Allow that the identical pin function can * be requested from the same driver twice @@ -641,7 +567,7 @@ void peripheral_free_list(const unsigned short per[]) * MODIFICATION HISTORY : **************************************************************/ -int bfin_gpio_request(unsigned gpio, const char *label) +int gpio_request(unsigned gpio, const char *label) { if (check_gpio(gpio) < 0) return -EINVAL; @@ -665,11 +591,9 @@ int bfin_gpio_request(unsigned gpio, const char *label) gpio, get_label(gpio)); return -EBUSY; } -#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } -#endif reserve(gpio, gpio); set_label(gpio, label); @@ -679,27 +603,27 @@ int bfin_gpio_request(unsigned gpio, const char *label) return 0; } -#ifdef CONFIG_BFIN_GPIO_TRACK -void bfin_gpio_free(unsigned gpio) +int gpio_free(unsigned gpio) { if (check_gpio(gpio) < 0) - return; + return -1; if (unlikely(!is_reserved(gpio, gpio, 0))) { gpio_error(gpio); - return; + return -1; } unreserve(gpio, gpio); set_label(gpio, "free"); + + return 0; } -#endif -#ifdef BFIN_SPECIAL_GPIO_BANKS +#ifdef ADI_SPECIAL_GPIO_BANKS DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); -int bfin_special_gpio_request(unsigned gpio, const char *label) +int special_gpio_request(unsigned gpio, const char *label) { /* * Allow that the identical GPIO can @@ -731,7 +655,7 @@ int bfin_special_gpio_request(unsigned gpio, const char *label) return 0; } -void bfin_special_gpio_free(unsigned gpio) +void special_gpio_free(unsigned gpio) { if (unlikely(!is_reserved(special_gpio, gpio, 0))) { gpio_error(gpio); @@ -744,21 +668,13 @@ void bfin_special_gpio_free(unsigned gpio) } #endif -static inline void __bfin_gpio_direction_input(unsigned gpio) +static inline void __gpio_direction_input(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); -#endif -#if defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); -#endif } -int bfin_gpio_direction_input(unsigned gpio) +int gpio_direction_input(unsigned gpio) { unsigned long flags; @@ -768,31 +684,24 @@ int bfin_gpio_direction_input(unsigned gpio) } local_irq_save(flags); - __bfin_gpio_direction_input(gpio); + __gpio_direction_input(gpio); AWA_DUMMY_READ(inen); local_irq_restore(flags); return 0; } -void bfin_gpio_toggle_value(unsigned gpio) -{ -#ifdef CONFIG_BF54x - gpio_set_value(gpio, !gpio_get_value(gpio)); -#else - gpio_array[gpio_bank(gpio)]->toggle = gpio_bit(gpio); -#endif -} - -void bfin_gpio_set_value(unsigned gpio, int arg) +int gpio_set_value(unsigned gpio, int arg) { if (arg) gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); else gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + + return 0; } -int bfin_gpio_direction_output(unsigned gpio, int value) +int gpio_direction_output(unsigned gpio, int value) { unsigned long flags; @@ -803,17 +712,9 @@ int bfin_gpio_direction_output(unsigned gpio, int value) local_irq_save(flags); -#if defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); -#endif gpio_set_value(gpio, value); -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); -#else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); -#endif AWA_DUMMY_READ(dir); local_irq_restore(flags); @@ -821,11 +722,8 @@ int bfin_gpio_direction_output(unsigned gpio, int value) return 0; } -int bfin_gpio_get_value(unsigned gpio) +int gpio_get_value(unsigned gpio) { -#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) - return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); -#else unsigned long flags; if (unlikely(get_gpio_edge(gpio))) { @@ -838,7 +736,6 @@ int bfin_gpio_get_value(unsigned gpio) return ret; } else return get_gpio_data(gpio); -#endif } /* If we are booting from SPI and our board lacks a strong enough pull up, @@ -860,8 +757,7 @@ void bfin_reset_boot_spi_cs(unsigned short pin) udelay(1); } -#ifdef CONFIG_BFIN_GPIO_TRACK -void bfin_gpio_labels(void) +void gpio_labels(void) { int c, gpio; @@ -877,4 +773,3 @@ void bfin_gpio_labels(void) continue; } } -#endif diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 1a06680..ffaf101 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -13,12 +13,12 @@ #include <config.h> #include <asm/blackfin.h> +#include <asm/mach-common/bits/watchdog.h> #include <asm/mach-common/bits/bootrom.h> #include <asm/mach-common/bits/core.h> +#include <asm/serial.h> -#define BUG() while (1) { asm volatile("emuexcpt;"); } - -#include "serial.h" +#define BUG() while (1) asm volatile("emuexcpt;"); #ifndef __ADSPBF60x__ #include <asm/mach-common/bits/ebiu.h> @@ -193,17 +193,12 @@ static inline void serial_init(void) } #endif +#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS if (BFIN_DEBUG_EARLY_SERIAL) { - int enabled = serial_early_enabled(uart_base); - serial_early_init(uart_base); - - /* If the UART is off, that means we need to program - * the baud rate ourselves initially. - */ - if (!enabled) - serial_early_set_baud(uart_base, CONFIG_BAUDRATE); + serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } +#endif } __attribute__((always_inline)) @@ -262,7 +257,8 @@ program_nmi_handler(void) "%1 = RETS;" /* Load addr of NMI handler */ "RETS = %0;" /* Restore RETS */ "[%2] = %1;" /* Write NMI handler */ - : "=r"(tmp1), "=r"(tmp2) : "ab"(EVT2) + : "=d"(tmp1), "=d"(tmp2) + : "ab"(EVT2) ); } @@ -462,19 +458,29 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { serial_putc('e'); #ifdef __ADSPBF60x__ + /* Reset system event controller */ bfin_write_SEC_GCTL(0x2); + bfin_write_SEC_CCTL(0x2); SSYNC(); + + /* Enable fault event input and system reset action in fault + * controller. Route watchdog timeout event to fault interface. + */ bfin_write_SEC_FCTL(0xc1); + /* Enable watchdog interrupt source */ bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6); - - bfin_write_SEC_CCTL(0x2); SSYNC(); + + /* Enable system event controller */ bfin_write_SEC_GCTL(0x1); bfin_write_SEC_CCTL(0x1); + SSYNC(); #endif + bfin_write_WDOG_CTL(WDDIS); + SSYNC(); bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); #if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART - bfin_write_WDOG_CTL(0); + bfin_write_WDOG_CTL(WDEN); #endif serial_putc('f'); } @@ -713,37 +719,32 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) __attribute__((always_inline)) static inline void update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) { - serial_putc('a'); - /* Since we've changed the SCLK above, we may need to update * the UART divisors (UART baud rates are based on SCLK). * Do the division by hand as there are no native instructions * for dividing which means we'd generate a libgcc reference. */ - if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - unsigned int sdivR, vcoR; - int dividend = sdivB * divB * vcoR; - int divisor = vcoB * sdivR; - unsigned int quotient; + unsigned int sdivR, vcoR; + unsigned int dividend; + unsigned int divisor; + unsigned int quotient; - serial_putc('b'); + serial_putc('a'); #ifdef __ADSPBF60x__ - sdivR = bfin_read_CGU_DIV(); - sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); - vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; + sdivR = bfin_read_CGU_DIV(); + sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); + vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; #else - sdivR = bfin_read_PLL_DIV() & 0xf; - vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; + sdivR = bfin_read_PLL_DIV() & 0xf; + vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; #endif - for (quotient = 0; dividend > 0; ++quotient) - dividend -= divisor; - serial_early_put_div(quotient - ANOMALY_05000230); - serial_putc('c'); - } - - serial_putc('d'); + dividend = sdivB * divB * vcoR; + divisor = vcoB * sdivR; + quotient = early_division(dividend, divisor); + serial_early_put_div(quotient - ANOMALY_05000230); + serial_putc('c'); } __attribute__((always_inline)) static inline void diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 7155fc8..da084a8 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -32,10 +32,10 @@ #include <config.h> #include <asm/blackfin.h> +#include <asm/mach-common/bits/watchdog.h> #include <asm/mach-common/bits/core.h> #include <asm/mach-common/bits/pll.h> - -#include "serial.h" +#include <asm/serial.h> /* It may seem odd that we make calls to functions even though we haven't * relocated ourselves yet out of {flash,ram,wherever}. This is OK because @@ -65,20 +65,29 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE); #ifdef CONFIG_HW_WATCHDOG -#ifndef __ADSPBF60x__ -# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START -# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 -# endif - /* Program the watchdog with an initial timeout of ~5 seconds. + /* Program the watchdog with default timeout of ~5 seconds. * That should be long enough to bootstrap ourselves up and * then the common u-boot code can take over. */ + r1 = WDDIS; +# ifdef __ADSPBF60x__ + [p4 + (WDOG_CTL - SYSMMR_BASE)] = r1; +# else + W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r1; +# endif + SSYNC; r0 = 0; - r0.h = HI(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_START)); + r0.h = HI(MSEC_TO_SCLK(CONFIG_WATCHDOG_TIMEOUT_MSECS)); [p4 + (WDOG_CNT - SYSMMR_BASE)] = r0; + SSYNC; + r1 = WDEN; /* fire up the watchdog - R0.L above needs to be 0x0000 */ - W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; -#endif +# ifdef __ADSPBF60x__ + [p4 + (WDOG_CTL - SYSMMR_BASE)] = r1; +# else + W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r1; +# endif + SSYNC; #endif /* Turn on the serial for debugging the init process */ diff --git a/arch/blackfin/include/asm/clock.h b/arch/blackfin/include/asm/clock.h new file mode 100644 index 0000000..f1fcd40 --- /dev/null +++ b/arch/blackfin/include/asm/clock.h @@ -0,0 +1,78 @@ + +/* + * Copyright (C) 2012 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef __CLOCK_H__ +#define __CLOCK_H__ + +#include <asm/blackfin.h> +#ifdef PLL_CTL +#include <asm/mach-common/bits/pll.h> +# define pll_is_bypassed() (bfin_read_PLL_CTL() & BYPASS) +#else +#include <asm/mach-common/bits/cgu.h> +# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) +# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() +# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() +# define SSEL SYSSEL +# define SSEL_P SYSSEL_P +#endif + +__attribute__((always_inline)) +static inline uint32_t early_division(uint32_t dividend, uint32_t divisor) +{ + uint32_t quotient; + uint32_t i, j; + + for (quotient = 1, i = 1; dividend > divisor; ++i) { + j = divisor << i; + if (j > dividend || (j & 0x80000000)) { + --i; + quotient += (1 << i); + dividend -= (divisor << i); + i = 0; + } + } + + return quotient; +} + +__attribute__((always_inline)) +static inline uint32_t early_get_uart_clk(void) +{ + uint32_t msel, pll_ctl, vco; + uint32_t div, ssel, sclk, uclk; + + pll_ctl = bfin_read_PLL_CTL(); + msel = (pll_ctl & MSEL) >> MSEL_P; + if (msel == 0) + msel = (MSEL >> MSEL_P) + 1; + + vco = (CONFIG_CLKIN_HZ >> (pll_ctl & DF)) * msel; + sclk = vco; + if (!pll_is_bypassed()) { + div = bfin_read_PLL_DIV(); + ssel = (div & SSEL) >> SSEL_P; +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS + sclk = vco/ssel; +#else + sclk = early_division(vco, ssel); +#endif + } + uclk = sclk; +#ifdef CGU_DIV + ssel = (div & S0SEL) >> S0SEL_P; + uclk = early_division(sclk, ssel); +#endif + return uclk; +} + +#ifdef CGU_DIV +# define get_uart_clk get_sclk0 +#else +# define get_uart_clk get_sclk +#endif + +#endif diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index ef1db6e..8a7c079 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -17,21 +17,21 @@ struct dmasg_large { void *next_desc_addr; - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed)); struct dmasg { - unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + u32 start_addr; + u16 cfg; + u16 x_count; + s16 x_modify; + u16 y_count; + s16 y_modify; } __attribute__((packed)); struct dma_register { diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 05131b5..58a6191 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -7,6 +7,8 @@ #ifndef __ARCH_BLACKFIN_GPIO_H__ #define __ARCH_BLACKFIN_GPIO_H__ +#include <asm-generic/gpio.h> + #define gpio_bank(x) ((x) >> 4) #define gpio_bit(x) (1<<((x) & 0xF)) #define gpio_sub_n(x) ((x) & 0xF) @@ -65,10 +67,11 @@ #define PERIPHERAL_USAGE 1 #define GPIO_USAGE 0 +#define MAX_GPIOS MAX_BLACKFIN_GPIOS #ifndef __ASSEMBLY__ -#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) +#ifdef CONFIG_ADI_GPIO1 void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); @@ -140,61 +143,16 @@ struct gpio_port_t { }; #endif -#ifdef CONFIG_BFIN_GPIO_TRACK -void bfin_gpio_labels(void); -void bfin_gpio_free(unsigned gpio); -#else -#define bfin_gpio_labels() -#define bfin_gpio_free(gpio) -#define bfin_gpio_request(gpio, label) bfin_gpio_request(gpio) -#define bfin_special_gpio_request(gpio, label) bfin_special_gpio_request(gpio) -#endif - -#ifdef BFIN_SPECIAL_GPIO_BANKS -void bfin_special_gpio_free(unsigned gpio); -int bfin_special_gpio_request(unsigned gpio, const char *label); +#ifdef ADI_SPECIAL_GPIO_BANKS +void special_gpio_free(unsigned gpio); +int special_gpio_request(unsigned gpio, const char *label); #endif -int bfin_gpio_request(unsigned gpio, const char *label); -int bfin_gpio_direction_input(unsigned gpio); -int bfin_gpio_direction_output(unsigned gpio, int value); -int bfin_gpio_get_value(unsigned gpio); -void bfin_gpio_set_value(unsigned gpio, int value); -void bfin_gpio_toggle_value(unsigned gpio); - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return bfin_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - return bfin_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return bfin_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return bfin_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return bfin_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - return bfin_gpio_set_value(gpio, value); -} +void gpio_labels(void); static inline int gpio_is_valid(int number) { - return number >= 0 && number < MAX_BLACKFIN_GPIOS; + return number >= 0 && number < MAX_GPIOS; } #include <linux/ctype.h> @@ -248,7 +206,7 @@ static inline int name_to_gpio(const char *name) } #define name_to_gpio(n) name_to_gpio(n) -#define gpio_status() bfin_gpio_labels() +#define gpio_status() gpio_labels() #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/include/asm/mach-bf561/BF561_def.h b/arch/blackfin/include/asm/mach-bf561/BF561_def.h index a7ff5a3..8fd552f 100644 --- a/arch/blackfin/include/asm/mach-bf561/BF561_def.h +++ b/arch/blackfin/include/asm/mach-bf561/BF561_def.h @@ -714,4 +714,6 @@ #define L1_INST_SRAM_SIZE (0xFFA03FFF - 0xFFA00000 + 1) #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) +#define COREB_L1_CODE_START 0xFF600000 + #endif /* __BFIN_DEF_ADSP_BF561_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h index 8c1dcd0..02b81d3 100644 --- a/arch/blackfin/include/asm/mach-bf609/BF609_def.h +++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h @@ -128,6 +128,9 @@ #define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */ #define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */ +#define SPI0_REGBASE 0xFFC40400 /* SPI0 Base Address */ +#define SPI1_REGBASE 0xFFC40500 /* SPI1 Base Address */ + #define DMA10_DSCPTR_NXT 0xFFC05000 /* DMA10 Pointer to Next Initial Desc */ #define DMA10_ADDRSTART 0xFFC05004 /* DMA10 Start Address of Current Buf */ #define DMA10_CFG 0xFFC05008 /* DMA10 Configuration Register */ @@ -244,4 +247,6 @@ #define L1_INST_SRAM_SIZE 0x8000 #define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) +#define COREB_L1_CODE_START 0xFF600000 + #endif /* __BFIN_DEF_ADSP_BF609_proc__ */ diff --git a/arch/blackfin/include/asm/portmux.h b/arch/blackfin/include/asm/portmux.h index 300ef44..003694b 100644 --- a/arch/blackfin/include/asm/portmux.h +++ b/arch/blackfin/include/asm/portmux.h @@ -17,11 +17,6 @@ #define P_MAYSHARE 0x2000 #define P_DONTCARE 0x1000 -#ifndef CONFIG_BFIN_GPIO_TRACK -#define peripheral_request(per, label) peripheral_request(per) -#define peripheral_request_list(per, label) peripheral_request_list(per) -#endif - #ifndef __ASSEMBLY__ int peripheral_request(unsigned short per, const char *label); diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/include/asm/serial.h index 9200339..87a337d 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/include/asm/serial.h @@ -78,19 +78,31 @@ static inline void serial_early_puts(const char *s) #else .macro serial_early_init -#ifdef CONFIG_DEBUG_EARLY_SERIAL - call _serial_initialize; +#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM) + call __serial_early_init; #endif .endm .macro serial_early_set_baud -#ifdef CONFIG_DEBUG_EARLY_SERIAL +#if defined(CONFIG_DEBUG_EARLY_SERIAL) && !defined(CONFIG_UART_MEM) R0.L = LO(CONFIG_BAUDRATE); R0.H = HI(CONFIG_BAUDRATE); - call _serial_set_baud; + call __serial_early_set_baud; #endif .endm +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS +#define update_serial_early_string_addr \ + R1.L = _start; \ + R1.H = _start; \ + R0 = R0 - R1; \ + R1.L = 0; \ + R1.H = 0x2000; \ + R0 = R0 + R1; +#else +#define update_serial_early_string_addr +#endif + /* Since we embed the string right into our .text section, we need * to find its address. We do this by getting our PC and adding 2 * bytes (which is the length of the jump instruction). Then we @@ -108,7 +120,8 @@ static inline void serial_early_puts(const char *s) .previous; \ R0.L = 7b; \ R0.H = 7b; \ - call _serial_puts; + update_serial_early_string_addr \ + call _uart_early_puts; #else # define serial_early_puts(str) #endif diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/include/asm/serial1.h index a20175b..467d381 100644 --- a/arch/blackfin/cpu/serial1.h +++ b/arch/blackfin/include/asm/serial1.h @@ -15,6 +15,8 @@ #ifndef __ASSEMBLY__ +#include <asm/clock.h> + #define MMR_UART(n) _PASTE_UART(n, UART, DLL) #ifdef UART_DLL # define UART0_DLL UART_DLL @@ -230,19 +232,6 @@ static inline void serial_early_do_portmux(void) } __attribute__((always_inline)) -static inline uint32_t uart_sclk(void) -{ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) - /* We cannot use get_sclk() early on as it uses - * caches in external memory - */ - return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV; -#else - return get_sclk(); -#endif -} - -__attribute__((always_inline)) static inline int uart_init(uint32_t uart_base) { /* always enable UART -- avoids anomalies 05000309 and 05000350 */ @@ -275,21 +264,8 @@ static inline int serial_early_uninit(uint32_t uart_base) } __attribute__((always_inline)) -static inline int serial_early_enabled(uint32_t uart_base) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) { - return bfin_read(&pUART->gctl) & UCEN; -} - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ - uint16_t divisor = (uart_sclk() + (baud * 8)) / (baud * 16) - - ANOMALY_05000230; - /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH(); SSYNC(); @@ -305,6 +281,24 @@ static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) } __attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ +#if CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS + uint16_t divisor = (early_get_uart_clk() + baud * 8) / (baud * 16) + - ANOMALY_05000230; +#else + uint16_t divisor = early_division(early_get_uart_clk() + (baud * 8), + baud * 16) - ANOMALY_05000230; +#endif + + serial_set_divisor(uart_base, divisor); +} + +__attribute__((always_inline)) static inline void serial_early_put_div(uint16_t divisor) { uint32_t uart_base = UART_BASE; diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/include/asm/serial4.h index 887845c..6548396 100644 --- a/arch/blackfin/cpu/serial4.h +++ b/arch/blackfin/include/asm/serial4.h @@ -15,6 +15,8 @@ #ifndef __ASSEMBLY__ +#include <asm/clock.h> + #define MMR_UART(n) _PASTE_UART(n, UART, REVID) #define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) @@ -84,20 +86,6 @@ static inline void serial_early_do_portmux(void) } __attribute__((always_inline)) -static inline uint32_t uart_sclk(void) -{ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) - /* We cannot use get_sclk() early on as it uses caches in - * external memory - */ - return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV / - CONFIG_SCLK0_DIV; -#else - return get_sclk0(); -#endif -} - -__attribute__((always_inline)) static inline int uart_init(uint32_t uart_base) { /* always enable UART to 8-bit mode */ @@ -127,19 +115,20 @@ static inline int serial_early_uninit(uint32_t uart_base) } __attribute__((always_inline)) -static inline int serial_early_enabled(uint32_t uart_base) +static inline void serial_set_divisor(uint32_t uart_base, uint16_t divisor) { - return bfin_read(&pUART->control) & UEN; + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->clock, divisor); + SSYNC(); } __attribute__((always_inline)) static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) { - uint32_t divisor = uart_sclk() / (baud * 16); + uint16_t divisor = early_division(early_get_uart_clk(), baud * 16); /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->clock, divisor); - SSYNC(); + serial_set_divisor(uart_base, divisor); } __attribute__((always_inline)) diff --git a/arch/blackfin/include/asm/soft_switch.h b/arch/blackfin/include/asm/soft_switch.h new file mode 100644 index 0000000..ff8e44d --- /dev/null +++ b/arch/blackfin/include/asm/soft_switch.h @@ -0,0 +1,18 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __SOFT_SWITCH_H__ +#define __SOFT_SWITCH_H__ + +#define IO_PORT_A 0 +#define IO_PORT_B 1 +#define IO_PORT_INPUT 0 +#define IO_PORT_OUTPUT 1 + +int config_switch_bit(int num, int port, int bit, int dir, uchar value); +#endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index ccea3b9..f1d5547 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -231,6 +231,8 @@ static int global_board_data_init(void) bd->bi_sclk = get_sclk(); bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; + bd->bi_baudrate = (gd->baudrate > 0) + ? simple_strtoul(gd->baudrate, NULL, 10) : CONFIG_BAUDRATE; return 0; } @@ -277,9 +279,9 @@ void board_init_f(ulong bootflag) dcache_enable(); #endif -#ifdef CONFIG_WATCHDOG +#ifdef CONFIG_HW_WATCHDOG serial_early_puts("Setting up external watchdog\n"); - watchdog_init(); + hw_watchdog_init(); #endif #ifdef DEBUG diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c index d852f5e..97795e1 100644 --- a/arch/blackfin/lib/clocks.c +++ b/arch/blackfin/lib/clocks.c @@ -7,17 +7,7 @@ */ #include <common.h> -#include <asm/blackfin.h> - -#ifdef PLL_CTL -# include <asm/mach-common/bits/pll.h> -# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF) -#else -# include <asm/mach-common/bits/cgu.h> -# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) -# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() -# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() -#endif +#include <asm/clock.h> /* Get the voltage input multiplier */ u_long get_vco(void) diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c index 44d8c6d..5b7ac0b 100644 --- a/arch/blackfin/lib/string.c +++ b/arch/blackfin/lib/string.c @@ -128,10 +128,12 @@ static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count, unsigned long limit; #ifdef MSIZE - limit = 6; + /* The max memory DMA memory transfer size is 32 bytes. */ + limit = 5; *dshift = MSIZE_P; #else - limit = 3; + /* The max memory DMA memory transfer size is 4 bytes. */ + limit = 2; *dshift = WDSIZE_P; #endif @@ -170,7 +172,8 @@ void dma_memcpy_nocache(void *dst, const void *src, size_t count) mod = 1 << bpos; #ifdef PSIZE - dsize |= min(3, bpos) << PSIZE_P; + /* The max memory DMA peripheral transfer size is 4 bytes. */ + dsize |= min(2, bpos) << PSIZE_P; #endif /* Copy sram functions from sdram to sram */ diff --git a/arch/m68k/lib/bootm.c b/arch/m68k/lib/bootm.c index d506d0c..56b6512 100644 --- a/arch/m68k/lib/bootm.c +++ b/arch/m68k/lib/bootm.c @@ -78,13 +78,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) return 1; - /* allocate space and init command line */ - ret = boot_get_cmdline (lmb, &cmd_start, &cmd_end); - if (ret) { - puts("ERROR with allocation of cmdline\n"); - goto error; - } - /* allocate space for kernel copy of board info */ ret = boot_get_kbd (lmb, &kbd); if (ret) { @@ -93,14 +86,12 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima } set_clocks_in_mhz(kbd); - kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))images->ep; - - rd_len = images->rd_end - images->rd_start; - ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, - &initrd_start, &initrd_end); + ret = image_setup_linux(images); if (ret) goto error; + kernel = (void (*)(bd_t *, ulong, ulong, ulong, ulong))images->ep; + debug("## Transferring control to Linux (at address %08lx) ...\n", (ulong) kernel); diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h index 883f4d4..f5cad56 100644 --- a/arch/microblaze/include/asm/gpio.h +++ b/arch/microblaze/include/asm/gpio.h @@ -1,41 +1,15 @@ #ifndef _ASM_MICROBLAZE_GPIO_H_ #define _ASM_MICROBLAZE_GPIO_H_ -#include <asm/io.h> +#include <asm-generic/gpio.h> -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} +/* Allocation functions */ +extern int gpio_alloc_dual(u32 baseaddr, const char *name, u32 gpio_no0, + u32 gpio_no1); +extern int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no); -static inline int gpio_free(unsigned gpio) -{ - return 0; -} +#define gpio_status() gpio_info() +extern void gpio_info(void); -static inline int gpio_direction_input(unsigned gpio) -{ - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - return 0; -} - -static inline int gpio_set_value(unsigned gpio, int value) -{ - return 0; -} - -static inline int gpio_is_valid(int number) -{ - return 0; -} #endif diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 66d21f4..3842709 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -32,11 +32,12 @@ DECLARE_GLOBAL_DATA_PTR; -int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) +int do_bootm_linux(int flag, int argc, char * const argv[], + bootm_headers_t *images) { /* First parameter is mapped to $r5 for kernel boot args */ - void (*theKernel) (char *, ulong, ulong); - char *commandline = getenv ("bootargs"); + void (*thekernel) (char *, ulong, ulong); + char *commandline = getenv("bootargs"); ulong rd_data_start, rd_data_end; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) @@ -51,10 +52,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima of_flat_tree = images->ft_addr; #endif - theKernel = (void (*)(char *, ulong, ulong))images->ep; + thekernel = (void (*)(char *, ulong, ulong))images->ep; /* find ramdisk */ - ret = boot_get_ramdisk (argc, argv, images, IH_ARCH_MICROBLAZE, + ret = boot_get_ramdisk(argc, argv, images, IH_ARCH_MICROBLAZE, &rd_data_start, &rd_data_end); if (ret) return 1; @@ -63,10 +64,19 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima if (!of_flat_tree && argc > 3) of_flat_tree = (char *)simple_strtoul(argv[3], NULL, 16); + + /* fixup the initrd now that we know where it should be */ + if (images->rd_start && images->rd_end && of_flat_tree) + ret = fdt_initrd(of_flat_tree, images->rd_start, + images->rd_end, 1); + if (ret) + return 1; + #ifdef DEBUG - printf ("## Transferring control to Linux (at address 0x%08lx) " \ - "ramdisk 0x%08lx, FDT 0x%08lx...\n", - (ulong) theKernel, rd_data_start, (ulong) of_flat_tree); + printf("## Transferring control to Linux (at address 0x%08lx) ", + (ulong)thekernel); + printf("ramdisk 0x%08lx, FDT 0x%08lx...\n", + rd_data_start, (ulong) of_flat_tree); #endif #ifdef XILINX_USE_DCACHE @@ -78,7 +88,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima * r6: pointer to ramdisk * r7: pointer to the fdt, followed by the board info data */ - theKernel (commandline, rd_data_start, (ulong) of_flat_tree); + thekernel(commandline, rd_data_start, (ulong)of_flat_tree); /* does not return */ return 1; diff --git a/arch/nds32/include/asm/u-boot-nds32.h b/arch/nds32/include/asm/u-boot-nds32.h index f3c7b27..d22eb5b 100644 --- a/arch/nds32/include/asm/u-boot-nds32.h +++ b/arch/nds32/include/asm/u-boot-nds32.h @@ -30,11 +30,6 @@ #define _U_BOOT_NDS32_H_ 1 /* for the following variables, see start.S */ -extern char __bss_start[]; /* BSS start relative to _start */ -extern ulong __bss_end; /* BSS end relative to _start */ -extern char _end[]; /* end of image relative to _start */ -extern void _start(void); /* start of image relative to _start */ -extern ulong _TEXT_BASE; /* code start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 57af1be..1157d8c 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -36,6 +36,7 @@ #include <nand.h> #include <onenand_uboot.h> #include <mmc.h> +#include <asm/sections.h> DECLARE_GLOBAL_DATA_PTR; @@ -300,7 +301,7 @@ void board_init_r(gd_t *id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - monitor_flash_len = &_end - &_start; + monitor_flash_len = (ulong)&_end - (ulong)&_start; debug("monitor flash len: %08lX\n", monitor_flash_len); board_init(); /* Setup chipselects */ diff --git a/arch/openrisc/config.mk b/arch/openrisc/config.mk index 521e73a..01c0f77 100644 --- a/arch/openrisc/config.mk +++ b/arch/openrisc/config.mk @@ -25,3 +25,5 @@ CROSS_COMPILE ?= or32-elf- PLATFORM_CPPFLAGS += -DCONFIG_OPENRISC -D__OR1K__ -ffixed-r10 CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 + +LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/arch/openrisc/cpu/u-boot.lds index 9024f30..d9bb7b7 100644 --- a/board/openrisc/openrisc-generic/u-boot.lds +++ b/arch/openrisc/cpu/u-boot.lds @@ -30,7 +30,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { KEEP(*(SORT(.u_boot_list*))); - } + } > ram .rodata : { *(.rodata); diff --git a/arch/powerpc/cpu/mpc8220/Makefile b/arch/powerpc/cpu/mpc8220/Makefile deleted file mode 100644 index b8529ef..0000000 --- a/arch/powerpc/cpu/mpc8220/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(CPU).o - -START = start.o -SOBJS = io.o fec_dma_tasks.o -COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \ - interrupts.o loadtask.o speed.o \ - traps.o uart.o pci.o - -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -START := $(addprefix $(obj),$(START)) - -all: $(obj).depend $(START) $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/powerpc/cpu/mpc8220/config.mk b/arch/powerpc/cpu/mpc8220/config.mk deleted file mode 100644 index 2c638b5..0000000 --- a/arch/powerpc/cpu/mpc8220/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2003-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -PLATFORM_RELFLAGS += -meabi - -PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \ - -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc8220/cpu.c b/arch/powerpc/cpu/mpc8220/cpu.c deleted file mode 100644 index 64e0526..0000000 --- a/arch/powerpc/cpu/mpc8220/cpu.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * CPU specific code for the MPC8220 CPUs - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <mpc8220.h> -#include <netdev.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -int checkcpu (void) -{ - ulong clock = gd->cpu_clk; - char buf[32]; - - puts ("CPU: "); - - printf (CPU_ID_STR); - - printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50)); - - printf (" at %s MHz\n", strmhz (buf, clock)); - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR; - ulong msr; - - /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); - - /* Charge the watchdog timer */ - gptmr->Prescl = 10; - gptmr->Count = 1; - - gptmr->Mode = GPT_TMS_SGPIO; - - gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE; - - return 1; -} - -/* ------------------------------------------------------------------------- */ - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - * - */ -unsigned long get_tbclk (void) -{ - ulong tbclk; - - tbclk = (gd->bus_clk + 3L) / 4L; - - return (tbclk); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Initializes on-chip ethernet controllers. - * to override, implement board_eth_init() - */ -int cpu_eth_init(bd_t *bis) -{ -#if defined(CONFIG_MPC8220_FEC) - mpc8220_fec_initialize(bis); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8220/cpu_init.c b/arch/powerpc/cpu/mpc8220/cpu_init.c deleted file mode 100644 index 8f52c7d..0000000 --- a/arch/powerpc/cpu/mpc8220/cpu_init.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8220.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers. - */ -void cpu_init_f (void) -{ - volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB; - volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG; - volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB; - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* Clear all port configuration */ - portcfg->pcfg0 = 0; - portcfg->pcfg1 = 0; - portcfg->pcfg2 = 0; - portcfg->pcfg3 = 0; - portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG; - portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG; - - /* - * Flexbus Controller: configure chip selects and enable them - */ -#if defined (CONFIG_SYS_CS0_BASE) - flexbus->csar0 = CONFIG_SYS_CS0_BASE; - -/* Sorcery-C can hang-up after CTRL reg initialization */ -#if defined (CONFIG_SYS_CS0_CTRL) - flexbus->cscr0 = CONFIG_SYS_CS0_CTRL; -#endif - flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1; - __asm__ volatile ("sync"); -#endif -#if defined (CONFIG_SYS_CS1_BASE) - flexbus->csar1 = CONFIG_SYS_CS1_BASE; - flexbus->cscr1 = CONFIG_SYS_CS1_CTRL; - flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1; - __asm__ volatile ("sync"); -#endif -#if defined (CONFIG_SYS_CS2_BASE) - flexbus->csar2 = CONFIG_SYS_CS2_BASE; - flexbus->cscr2 = CONFIG_SYS_CS2_CTRL; - flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG; - __asm__ volatile ("sync"); -#endif -#if defined (CONFIG_SYS_CS3_BASE) - flexbus->csar3 = CONFIG_SYS_CS3_BASE; - flexbus->cscr3 = CONFIG_SYS_CS3_CTRL; - flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG; - __asm__ volatile ("sync"); -#endif -#if defined (CONFIG_SYS_CS4_BASE) - flexbus->csar4 = CONFIG_SYS_CS4_BASE; - flexbus->cscr4 = CONFIG_SYS_CS4_CTRL; - flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG; - __asm__ volatile ("sync"); -#endif -#if defined (CONFIG_SYS_CS5_BASE) - flexbus->csar5 = CONFIG_SYS_CS5_BASE; - flexbus->cscr5 = CONFIG_SYS_CS5_CTRL; - flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1; - portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG; - __asm__ volatile ("sync"); -#endif - - /* This section of the code cannot place in cpu_init_r(), - it will cause the system to hang */ - /* enable timebase */ - xlbarb->addrTenTimeOut = 0x1000; - xlbarb->dataTenTimeOut = 0x1000; - xlbarb->busActTimeOut = 0x2000; - - xlbarb->config = 0x00002000; - - /* Master Priority Enable */ - xlbarb->mastPriority = 0; - xlbarb->mastPriEn = 0xff; -} - -/* - * initialize higher level parts of CPU like time base and timers - */ -int cpu_init_r (void) -{ - /* this may belongs to disable interrupt section */ - /* mask all interrupts */ - *(vu_long *) 0xf0000700 = 0xfffffc00; - *(vu_long *) 0xf0000714 |= 0x0001ffff; - *(vu_long *) 0xf0000710 &= ~0x00000f00; - - /* route critical ints to normal ints */ - *(vu_long *) 0xf0000710 |= 0x00000001; - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC) - /* load FEC microcode */ - loadtask (0, 2); -#endif - return (0); -} diff --git a/arch/powerpc/cpu/mpc8220/dma.h b/arch/powerpc/cpu/mpc8220/dma.h deleted file mode 100644 index d06ee63..0000000 --- a/arch/powerpc/cpu/mpc8220/dma.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on code - * (C) Copyright Motorola, Inc., 2000 - * - * MPC8220 dma header file - */ - -#ifndef __MPC8220_DMA_H -#define __MPC8220_DMA_H - -#include <common.h> -#include <mpc8220.h> - -/* Task number assignment */ -#define FEC_RECV_TASK_NO 0 -#define FEC_XMIT_TASK_NO 1 - -/*--------------------------------------------------------------------- - * Stuff for Ethernet Tx/Rx tasks - *--------------------------------------------------------------------- - */ - -/* Layout of Ethernet controller Parameter SRAM area: - * ---------------------------------------------------------------- - * 0x00: TBD_BASE, base address of TX BD ring - * 0x04: TBD_NEXT, address of next TX BD to be processed - * 0x08: RBD_BASE, base address of RX BD ring - * 0x0C: RBD_NEXT, address of next RX BD to be processed - * --------------------------------------------------------------- - * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH). - */ - -/* base address of SRAM area to store parameters used by Ethernet tasks */ -#define FEC_PARAM_BASE (MMAP_SRAM + 0x5b00) - -/* base address of SRAM area for buffer descriptors */ -#define FEC_BD_BASE (MMAP_SRAM + 0x5b20) - -/*--------------------------------------------------------------------- - * common shortcuts used by driver C code - *--------------------------------------------------------------------- - */ - -/* Disable SmartDMA task */ -#define DMA_TASK_DISABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \ - *tcr = (*tcr) & (~0x8000); \ -} - -/* Enable SmartDMA task */ -#define DMA_TASK_ENABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\ - *tcr = (*tcr) | 0x8000; \ -} - -/* Clear interrupt pending bits */ -#define DMA_CLEAR_IEVENT(tasknum) \ -{ \ - struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA; \ - dma->IntPend = (1 << tasknum); \ -} - -#endif /* __MPC8220_DMA_H */ diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.c b/arch/powerpc/cpu/mpc8220/dramSetup.c deleted file mode 100644 index 52cf133..0000000 --- a/arch/powerpc/cpu/mpc8220/dramSetup.c +++ /dev/null @@ -1,752 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* -DESCRIPTION -Read Dram spd and base on its information to calculate the memory size, -characteristics to initialize the dram on MPC8220 -*/ - -#include <common.h> -#include <mpc8220.h> -#include "i2cCore.h" -#include "dramSetup.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE -#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ -#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS - -int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse) -{ - int i; - - for (i = 0; i < I2C_POLL_COUNT; i++) { - if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0)) - return (OK); - } - - return (ERROR); -} - -int spd_clear (volatile i2c8220_t * pi2c) -{ - pi2c->adr = 0; - pi2c->fdr = 0; - pi2c->cr = 0; - pi2c->sr = 0; - - return (OK); -} - -int spd_stop (volatile i2c8220_t * pi2c) -{ - pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */ - if (spd_status (pi2c, I2C_STA_BB, 0) != OK) - return ERROR; - - return (OK); -} - -int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index) -{ - pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */ - *readb = pi2c->dr; /* Read a byte */ - - /* - Set I2C_CTRL_TXAK will cause Transfer pending and - set I2C_CTRL_STA will cause Interrupt pending - */ - if (*index != 2) { - if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */ - return ERROR; - } - - if (*index != 1) { - if (spd_status (pi2c, I2C_STA_IF, 1) != OK) - return ERROR; - } - - return (OK); -} - -int readSpdData (u8 * spdData) -{ - volatile i2c8220_t *pi2cReg; - volatile pcfg8220_t *pcfg; - u8 slvAdr = DRAM_SPD; - u8 Tmp; - int Length = SPD_SIZE; - int i = 0; - - /* Enable Port Configuration for SDA and SDL signals */ - pcfg = (volatile pcfg8220_t *) (MMAP_PCFG); - __asm__ ("sync"); - pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG; - __asm__ ("sync"); - - /* Points the structure to I2c mbar memory offset */ - pi2cReg = (volatile i2c8220_t *) (MMAP_I2C); - - - /* Clear FDR, ADR, SR and CR reg */ - pi2cReg->adr = 0; - pi2cReg->fdr = 0; - pi2cReg->cr = 0; - pi2cReg->sr = 0; - - /* Set for fix XLB Bus Frequency */ - switch (gd->bus_clk) { - case 60000000: - pi2cReg->fdr = 0x15; - break; - case 70000000: - pi2cReg->fdr = 0x16; - break; - case 80000000: - pi2cReg->fdr = 0x3a; - break; - case 90000000: - pi2cReg->fdr = 0x17; - break; - case 100000000: - pi2cReg->fdr = 0x3b; - break; - case 110000000: - pi2cReg->fdr = 0x18; - break; - case 120000000: - pi2cReg->fdr = 0x19; - break; - case 130000000: - pi2cReg->fdr = 0x1a; - break; - } - - pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1; - - pi2cReg->cr = I2C_CTL_EN; /* Set Enable */ - - /* - The I2C bus should be in Idle state. If the bus is busy, - clear the STA bit in control register - */ - if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) { - if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA) - pi2cReg->cr &= ~I2C_CTL_STA; - - /* Check again if it is still busy, return error if found */ - if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK) - return ERROR; - } - - pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */ - pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */ - - if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK) - return ERROR; - - - /* Write slave address */ - pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */ - pi2cReg->dr = slvAdr; /* Write a byte */ - - if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */ - spd_stop (pi2cReg); - return ERROR; - } - - if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) { - spd_stop (pi2cReg); - return ERROR; - } - - - /* Issue the offset to start */ - pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */ - pi2cReg->dr = 0; /* Write a byte */ - - if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */ - spd_stop (pi2cReg); - return ERROR; - } - - if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) { - spd_stop (pi2cReg); - return ERROR; - } - - - /* Set repeat start */ - pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */ - - pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */ - pi2cReg->dr = slvAdr | 1; /* Write a byte */ - - if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */ - spd_stop (pi2cReg); - return ERROR; - } - - if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) { - spd_stop (pi2cReg); - return ERROR; - } - - if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01)) - return ERROR; - - pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */ - - if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01)) - return ERROR; - - /* Dummy Read */ - if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) { - spd_stop (pi2cReg); - return ERROR; - } - - i = 0; - while (Length) { - if (Length == 2) - pi2cReg->cr |= I2C_CTL_TXAK; - - if (Length == 1) - pi2cReg->cr &= ~I2C_CTL_STA; - - if (spd_readbyte (pi2cReg, spdData, &Length) != OK) { - return spd_stop (pi2cReg); - } - i++; - Length--; - spdData++; - } - - /* Stop the service */ - spd_stop (pi2cReg); - - return OK; -} - -int getBankInfo (int bank, draminfo_t * pBank) -{ - int status; - int checksum; - int count; - u8 spdData[SPD_SIZE]; - - - if (bank > 2 || pBank == 0) { - /* illegal values */ - return (-42); - } - - status = readSpdData (&spdData[0]); - if (status < 0) - return (-1); - - /* check the checksum */ - for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++) - checksum += spdData[count]; - - checksum = checksum - ((checksum / 256) * 256); - - if (checksum != spdData[LOC_CHECKSUM]) - return (-2); - - /* Get the memory type */ - if (! - ((spdData[LOC_TYPE] == TYPE_DDR) - || (spdData[LOC_TYPE] == TYPE_SDR))) - /* not one of the types we support */ - return (-3); - - pBank->type = spdData[LOC_TYPE]; - - /* Set logical banks */ - pBank->banks = spdData[LOC_LOGICAL_BANKS]; - - /* Check that we have enough physical banks to cover the bank we are - * figuring out. Odd-numbered banks correspond to the second bank - * on the device. - */ - if (bank & 1) { - /* Second bank of a "device" */ - if (spdData[LOC_PHYS_BANKS] < 2) - /* this bank doesn't exist on the "device" */ - return (-4); - - if (spdData[LOC_ROWS] & 0xf0) - /* Two asymmetric banks */ - pBank->rows = spdData[LOC_ROWS] >> 4; - else - pBank->rows = spdData[LOC_ROWS]; - - if (spdData[LOC_COLS] & 0xf0) - /* Two asymmetric banks */ - pBank->cols = spdData[LOC_COLS] >> 4; - else - pBank->cols = spdData[LOC_COLS]; - } else { - /* First bank of a "device" */ - pBank->rows = spdData[LOC_ROWS]; - pBank->cols = spdData[LOC_COLS]; - } - - pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW]; - pBank->bursts = spdData[LOC_BURSTS]; - pBank->CAS = spdData[LOC_CAS]; - pBank->CS = spdData[LOC_CS]; - pBank->WE = spdData[LOC_WE]; - pBank->Trp = spdData[LOC_Trp]; - pBank->Trcd = spdData[LOC_Trcd]; - pBank->buffered = spdData[LOC_Buffered] & 1; - pBank->refresh = spdData[LOC_REFRESH]; - - return (0); -} - - -/* checkMuxSetting -- given a row/column device geometry, return a mask - * of the valid DRAM controller addr_mux settings for - * that geometry. - * - * Arguments: u8 rows: number of row addresses in this device - * u8 columns: number of column addresses in this device - * - * Returns: a mask of the allowed addr_mux settings for this - * geometry. Each bit in the mask represents a - * possible addr_mux settings (for example, the - * (1<<2) bit in the mask represents the 0b10 setting)/ - * - */ -u8 checkMuxSetting (u8 rows, u8 columns) -{ - muxdesc_t *pIdx, *pMux; - u8 mask; - int lrows, lcolumns; - u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff }; - - /* Setup MuxDescriptor in SRAM space */ - /* MUXDESC AddressRuns [] = { - { 0, 8, 12, 4 }, / setting, columns, rows, extra columns / - { 1, 8, 13, 3 }, / setting, columns, rows, extra columns / - { 2, 8, 14, 2 }, / setting, columns, rows, extra columns / - { 0xff } / list terminator / - }; */ - - pIdx = (muxdesc_t *) & mux[0]; - - /* Check rows x columns against each possible address mux setting */ - for (pMux = pIdx, mask = 0;; pMux++) { - lrows = rows; - lcolumns = columns; - - if (pMux->MuxValue == 0xff) - break; /* end of list */ - - /* For a given mux setting, since we want all the memory in a - * device to be contiguous, we want the device "use up" the - * address lines such that there are no extra column or row - * address lines on the device. - */ - - lcolumns -= pMux->Columns; - if (lcolumns < 0) - /* Not enough columns to get to the rows */ - continue; - - lrows -= pMux->Rows; - if (lrows > 0) - /* we have extra rows left -- can't do that! */ - continue; - - /* At this point, we either have to have used up all the - * rows or we have to have no columns left. - */ - - if (lcolumns != 0 && lrows != 0) - /* rows AND columns are left. Bad! */ - continue; - - lcolumns -= pMux->MoreColumns; - - if (lcolumns <= 0) - mask |= (1 << pMux->MuxValue); - } - - return (mask); -} - - -u32 dramSetup (void) -{ - draminfo_t DramInfo[TOTAL_BANK]; - draminfo_t *pDramInfo; - u32 size, temp, cfg_value, mode_value, refresh; - u8 *ptr; - u8 bursts, Trp, Trcd, type, buffered; - u8 muxmask, rows, columns; - int count, banknum; - u32 *prefresh, *pIdx; - u32 refrate[8] = { 15625, 3900, 7800, 31300, - 62500, 125000, 0xffffffff, 0xffffffff - }; - volatile sysconf8220_t *sysconf; - volatile memctl8220_t *memctl; - - sysconf = (volatile sysconf8220_t *) MMAP_MBAR; - memctl = (volatile memctl8220_t *) MMAP_MEMCTL; - - /* Set everything in the descriptions to zero */ - ptr = (u8 *) & DramInfo[0]; - for (count = 0; count < sizeof (DramInfo); count++) - *ptr++ = 0; - - for (banknum = 0; banknum < TOTAL_BANK; banknum++) - sysconf->cscfg[banknum]; - - /* Descriptions of row/column address muxing for various - * addr_mux settings. - */ - - pIdx = prefresh = (u32 *) & refrate[0]; - - /* Get all the info for all three logical banks */ - bursts = 0xff; - Trp = 0; - Trcd = 0; - type = 0; - buffered = 0xff; - refresh = 0xffffffff; - muxmask = 0xff; - - /* Two bank, CS0 and CS1 */ - for (banknum = 0, pDramInfo = &DramInfo[0]; - banknum < TOTAL_BANK; banknum++, pDramInfo++) { - pDramInfo->ordinal = banknum; /* initial sorting */ - if (getBankInfo (banknum, pDramInfo) < 0) - continue; - - /* get cumulative parameters of all three banks */ - if (type && pDramInfo->type != type) - return 0; - - type = pDramInfo->type; - rows = pDramInfo->rows; - columns = pDramInfo->cols; - - /* This chip only supports 13 DRAM memory lines, but some devices - * have 14 rows. To deal with this, ignore the 14th address line - * by limiting the number of rows (and columns) to 13. This will - * mean that for 14-row devices we will only be able to use - * half of the memory, but it's better than nothing. - */ - if (rows > 13) - rows = 13; - if (columns > 13) - columns = 13; - - pDramInfo->size = - ((1 << (rows + columns)) * pDramInfo->width); - pDramInfo->size *= pDramInfo->banks; - pDramInfo->size >>= 3; - - /* figure out which addr_mux configurations will support this device */ - muxmask &= checkMuxSetting (rows, columns); - if (muxmask == 0) - return 0; - - buffered = pDramInfo->buffered; - bursts &= pDramInfo->bursts; /* union of all bursts */ - if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */ - Trp = pDramInfo->Trp; - - if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */ - Trcd = pDramInfo->Trcd; - - prefresh = pIdx; - /* worst case (shortest) Refresh period */ - if (refresh > prefresh[pDramInfo->refresh & 7]) - refresh = prefresh[pDramInfo->refresh & 7]; - - } /* for loop */ - - - /* We only allow a burst length of 8! */ - if (!(bursts & 8)) - bursts = 8; - - /* Sort the devices. In order to get each chip select region - * aligned properly, put the biggest device at the lowest address. - * A simple bubble sort will do the trick. - */ - for (banknum = 0, pDramInfo = &DramInfo[0]; - banknum < TOTAL_BANK; banknum++, pDramInfo++) { - int i; - - for (i = 0; i < TOTAL_BANK; i++) { - if (pDramInfo->size < DramInfo[i].size && - pDramInfo->ordinal < DramInfo[i].ordinal) { - /* If the current bank is smaller, but if the ordinal is also - * smaller, swap the ordinals - */ - u8 temp8; - - temp8 = DramInfo[i].ordinal; - DramInfo[i].ordinal = pDramInfo->ordinal; - pDramInfo->ordinal = temp8; - } - } - } - - - /* Now figure out the base address for each bank. While - * we're at it, figure out how much memory there is. - * - */ - size = 0; - for (banknum = 0; banknum < TOTAL_BANK; banknum++) { - int i; - - for (i = 0; i < TOTAL_BANK; i++) { - if (DramInfo[i].ordinal == banknum - && DramInfo[i].size != 0) { - DramInfo[i].base = size; - size += DramInfo[i].size; - } - } - } - - /* Set up the Drive Strength register */ - sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH; - - /* ********************** Cfg 1 ************************* */ - - /* Set the single read to read/write/precharge delay */ - cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb); - - /* Set the single write to read/write/precharge delay. - * This may or may not be correct. The controller spec - * says "tWR", but "tWR" does not appear in the SPD. It - * always seems to be 15nsec for the class of device we're - * using, which turns out to be 2 clock cycles at 133MHz, - * so that's what we're going to use. - * - * HOWEVER, because of a bug in the controller, for DDR - * we need to set this to be the same as the value - * calculated for bwt2rwp. - */ - cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2); - - /* Set the Read CAS latency. We're going to use a CL of - * 2.5 for DDR and 2 SDR. - */ - cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2); - - - /* Set the Active to Read/Write delay. This depends - * on Trcd which is reported as nanoseconds times 4. - * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz) - * which gives us a dimensionless quantity. Play games with - * the divisions so we don't run out of dynamic ranges. - */ - /* account for megaherz and the times 4 */ - temp = (Trcd * (gd->bus_clk / 1000000)) / 4; - - /* account for nanoseconds and round up, with a minimum value of 2 */ - temp = ((temp + 999) / 1000) - 1; - if (temp < 2) - temp = 2; - - cfg_value |= CFG1_ACT2WR (temp); - - /* Set the precharge to active delay. This depends - * on Trp which is reported as nanoseconds times 4. - * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz) - * which gives us a dimensionless quantity. Play games with - * the divisions so we don't run out of dynamic ranges. - */ - /* account for megaherz and the times 4 */ - temp = (Trp * (gd->bus_clk / 1000000)) / 4; - - /* account for nanoseconds and round up, then subtract 1, with a - * minumum value of 1 and a maximum value of 7. - */ - temp = (((temp + 999) / 1000) - 1) & 7; - if (temp < 1) - temp = 1; - - cfg_value |= CFG1_PRE2ACT (temp); - - /* Set refresh to active delay. This depends - * on Trfc which is not reported in the SPD. - * We'll use a nominal value of 75nsec which is - * what the controller spec uses. - */ - temp = (75 * (gd->bus_clk / 1000000)); - /* account for nanoseconds and round up, then subtract 1 */ - cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1); - - /* Set the write latency, using the values given in the controller spec */ - cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0); - memctl->cfg1 = cfg_value; /* cfg 1 */ - asm volatile ("sync"); - - - /* ********************** Cfg 2 ************************* */ - - /* Set the burst read to read/precharge delay */ - cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8); - - /* Set the burst write to read/precharge delay. Semi-magic numbers - * based on the controller spec recommendations, assuming tWR is - * two clock cycles. - */ - cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10); - - /* Set the Burst read to write delay. Semi-magic numbers - * based on the DRAM controller documentation. - */ - cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb); - - /* Set the burst length -- must be 8!! Well, 7, actually, becuase - * it's burst lenght minus 1. - */ - cfg_value |= CFG2_BURSTLEN (7); - memctl->cfg2 = cfg_value; /* cfg 2 */ - asm volatile ("sync"); - - - /* ********************** mode ************************* */ - - /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit, - * disable automatic refresh. - */ - cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH | - ((type == TYPE_DDR) ? CTL_DDR_MODE : 0); - - /* Set the address mux based on whichever setting(s) is/are common - * to all the devices we have. If there is more than one, choose - * one arbitrarily. - */ - if (muxmask & 0x4) - cfg_value |= CTL_ADDRMUX (2); - else if (muxmask & 0x2) - cfg_value |= CTL_ADDRMUX (1); - else - cfg_value |= CTL_ADDRMUX (0); - - /* Set the refresh interval. */ - temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1; - cfg_value |= CTL_REFRESH_INTERVAL (temp); - - /* Set buffered/non-buffered memory */ - if (buffered) - cfg_value |= CTL_BUFFERED; - - memctl->ctrl = cfg_value; /* ctrl */ - asm volatile ("sync"); - - if (type == TYPE_DDR) { - /* issue precharge all */ - temp = cfg_value | CTL_PRECHARGE_CMD; - memctl->ctrl = temp; /* ctrl */ - asm volatile ("sync"); - } - - - /* Set up mode value for CAS latency */ -#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */ - mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | - MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD); -#else - mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) | - MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD); -#endif - asm volatile ("sync"); - - /* Write Extended Mode - enable DLL */ - if (type == TYPE_DDR) { - temp = MODE_EXTENDED | MODE_X_DLL_ENABLE | - MODE_X_DS_NORMAL | MODE_CMD; - memctl->mode = (temp >> 16); /* mode */ - asm volatile ("sync"); - - /* Write Mode - reset DLL, set CAS latency */ - temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL); - memctl->mode = (temp >> 16); /* mode */ - asm volatile ("sync"); - } - - /* Program the chip selects. */ - for (banknum = 0; banknum < TOTAL_BANK; banknum++) { - if (DramInfo[banknum].size != 0) { - u32 mask; - int i; - - for (i = 0, mask = 1; i < 32; mask <<= 1, i++) { - if (DramInfo[banknum].size & mask) - break; - } - temp = (DramInfo[banknum].base & 0xfff00000) | (i - - 1); - - sysconf->cscfg[banknum] = temp; - asm volatile ("sync"); - } - } - - /* Wait for DLL lock */ - udelay (200); - - temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */ - memctl->ctrl = temp; /* ctrl */ - asm volatile ("sync"); - - temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */ - memctl->ctrl = temp; /* ctrl */ - asm volatile ("sync"); - - memctl->ctrl = temp; /* ctrl */ - asm volatile ("sync"); - - /* Write Mode - DLL normal */ - temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL); - memctl->mode = (temp >> 16); /* mode */ - asm volatile ("sync"); - - /* Enable refresh, enable DQS's (if DDR), and lock the control register */ - cfg_value &= ~CTL_MODE_ENABLE; /* lock register */ - cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */ - - if (type == TYPE_DDR) - cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */ - - memctl->ctrl = cfg_value; /* ctrl */ - asm volatile ("sync"); - - return size; -} diff --git a/arch/powerpc/cpu/mpc8220/dramSetup.h b/arch/powerpc/cpu/mpc8220/dramSetup.h deleted file mode 100644 index 3b64e08..0000000 --- a/arch/powerpc/cpu/mpc8220/dramSetup.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * dramSetup.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __INCdramsetuph -#define __INCdramsetuph -#ifndef __ASSEMBLY__ -/* Where various things are in the SPD */ -#define LOC_TYPE 2 -#define LOC_CHECKSUM 63 -#define LOC_PHYS_BANKS 5 -#define LOC_LOGICAL_BANKS 17 -#define LOC_ROWS 3 -#define LOC_COLS 4 -#define LOC_WIDTH_HIGH 7 -#define LOC_WIDTH_LOW 6 -#define LOC_REFRESH 12 -#define LOC_BURSTS 16 -#define LOC_CAS 18 -#define LOC_CS 19 -#define LOC_WE 20 -#define LOC_Tcyc 9 -#define LOC_Tac 10 -#define LOC_Trp 27 -#define LOC_Trrd 28 -#define LOC_Trcd 29 -#define LOC_Tras 30 -#define LOC_Buffered 21 -/* Types of memory the SPD can tell us about. - * We can actually only use SDRAM and DDR. - */ -#define TYPE_DRAM 1 /* plain old dram */ -#define TYPE_EDO 2 /* EDO dram */ -#define TYPE_Nibble 3 /* serial nibble memory */ -#define TYPE_SDR 4 /* SDRAM */ -#define TYPE_ROM 5 /* */ -#define TYPE_SGRRAM 6 /* graphics memory */ -#define TYPE_DDR 7 /* DDR sdram */ -#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */ -#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */ -#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */ -#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */ -#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */ -#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */ -#define DRIVE_STRENGTH_HIGH 0 -#define DRIVE_STRENGTH_MED 1 -#define DRIVE_STRENGTH_LOW 2 -#define DRIVE_STRENGTH_OFF 3 - -#define OK 0 -#define ERROR -1 -/* Structure to hold information about address muxing. */ - typedef struct tagMuxDescriptor { - u8 MuxValue; - u8 Columns; - u8 Rows; - u8 MoreColumns; -} muxdesc_t; - -/* Structure to define one physical bank of - * memory. Note that dram size in bytes is - * (2^^(rows+columns)) * width * banks / 8 -*/ -typedef struct tagDramInfo { - u32 size; /* size in bytes */ - u32 base; /* base address */ - u8 ordinal; /* where in the memory map will we put this */ - u8 type; - u8 rows; - u8 cols; - u16 width; /* width of each chip in bits */ - u8 banks; /* number of chips, aka logical banks */ - u8 bursts; /* bit-encoded allowable burst length */ - u8 CAS; /* bit-encoded CAS latency values */ - u8 CS; /* bit-encoded CS latency values */ - u8 WE; /* bit-encoded WE latency values */ - u8 Trp; /* bit-encoded row precharge time */ - u8 Trcd; /* bit-encoded RAS to CAS delay */ - u8 buffered; /* buffered or not */ - u8 refresh; /* encoded refresh rate */ -} draminfo_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __INCdramsetuph */ diff --git a/arch/powerpc/cpu/mpc8220/fec.c b/arch/powerpc/cpu/mpc8220/fec.c deleted file mode 100644 index 43fa802..0000000 --- a/arch/powerpc/cpu/mpc8220/fec.c +++ /dev/null @@ -1,961 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.c, - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc8220.h> -#include <malloc.h> -#include <net.h> -#include <miiphy.h> -#include "dma.h" -#include "fec.h" - -#undef DEBUG -#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC) - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#ifdef DEBUG -static void tfifo_print (char *devname, mpc8220_fec_priv * fec); -static void rfifo_print (char *devname, mpc8220_fec_priv * fec); -#endif /* DEBUG */ - -typedef struct { - u8 data[1500]; /* actual data */ - int length; /* actual length */ - int used; /* buffer in use or not */ - u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ -} NBUF; - -int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal); -int fec8220_miiphy_write (const char *devname, u8 phyAddr, u8 regAddr, u16 data); - -/********************************************************************/ -#ifdef DEBUG -static void mpc8220_fec_phydump (char *devname) -{ - u16 phyStatus, i; - u8 phyAddr = CONFIG_PHY_ADDR; - u8 reg_mask[] = { -#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ - /* regs to print: 0...7, 16...19, 21, 23, 24 */ - 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, -#else - /* regs to print: 0...8, 16...20 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -#endif - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read (devname, phyAddr, i, &phyStatus); - printf ("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec) -{ - int ix; - char *data; - static int once = 0; - - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - if (!once) { - data = (char *) malloc (FEC_MAX_PKT_SIZE); - if (data == NULL) { - printf ("RBD INIT FAILED\n"); - return -1; - } - fec->rbdBase[ix].dataPointer = (u32) data; - } - fec->rbdBase[ix].status = FEC_RBD_EMPTY; - fec->rbdBase[ix].dataLength = 0; - } - once++; - - /* - * have the last RBD to close the ring - */ - fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - return 0; -} - -/********************************************************************/ -static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec) -{ - int ix; - - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->tbdBase[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; -} - -/********************************************************************/ -static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Now, we have an empty RxBD, restart the SmartDMA receive task - */ - DMA_TASK_ENABLE (FEC_RECV_TASK_NO); - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; -} - -/********************************************************************/ -static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec) -{ - FEC_TBD *pUsedTbd; - -#ifdef DEBUG - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#ifdef DEBUG - printf ("Cannot clean TBD %d, in use\n", - fec->cleanTbdNum); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac) -{ - u8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - u32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = - (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis) -{ - mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; - struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA; - const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - -#ifdef DEBUG - printf ("mpc8220_fec_init... Begin\n"); -#endif - - /* - * Initialize RxBD/TxBD rings - */ - mpc8220_fec_rbd_init (fec); - mpc8220_fec_tbd_init (fec); - - /* - * Set up Pin Muxing for FEC 1 - */ - *(vu_long *) MMAP_PCFG = 0; - *(vu_long *) (MMAP_PCFG + 4) = 0; - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Set FEC-Lite receive control register(R_CNTRL): - */ - if (fec->xcv_type == SEVENWIRE) { - /* - * Frame length=1518; 7-wire mode - */ - fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ - } else { - /* - * Frame length=1518; MII mode; - */ - fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ - } - - fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - /* - * tbd - rtm - * fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1); - * No MII for 7-wire mode - */ - fec->eth->mii_speed = 0x00000030; - } - - /* - * Set Opcode/Pause Duration Register - */ - fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */ - - /* - * Set Rx FIFO alarm and granularity value - */ - fec->eth->rfifo_cntrl = 0x0c000000; - fec->eth->rfifo_alarm = 0x0000030c; -#ifdef DEBUG - if (fec->eth->rfifo_status & 0x00700000) { - printf ("mpc8220_fec_init() RFIFO error\n"); - } -#endif - - /* - * Set Tx FIFO granularity value - */ - /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */ - fec->eth->tfifo_cntrl = 0x0e000000; -#ifdef DEBUG - printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); - printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); -#endif - - /* - * Set transmit fifo watermark register(X_WMRK), default = 64 - */ - fec->eth->tfifo_alarm = 0x00000080; - fec->eth->x_wmrk = 0x2; - - /* - * Set individual address filter for unicast address - * and set physical address registers. - */ - mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr)); - - /* - * Set multicast address filter - */ - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - - /* - * Turn ON cheater FSM: ???? - */ - fec->eth->xmit_fsm = 0x03000000; - -#if 1 -/*#if defined(CONFIG_MPC5200)*/ - /* - * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't - * work w/ the current receive task. - */ - dma->PtdCntrl |= 0x00000001; -#endif - - /* - * Set priority of different initiators - */ - dma->IPR0 = 7; /* always */ - dma->IPR3 = 6; /* Eth RX */ - dma->IPR4 = 5; /* Eth Tx */ - - /* - * Clear SmartDMA task interrupt pending bits - */ - DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); - - /* - * Initialize SmartDMA parameters stored in SRAM - */ - *(int *) FEC_TBD_BASE = (int) fec->tbdBase; - *(int *) FEC_RBD_BASE = (int) fec->rbdBase; - *(int *) FEC_TBD_NEXT = (int) fec->tbdBase; - *(int *) FEC_RBD_NEXT = (int) fec->rbdBase; - - if (fec->xcv_type != SEVENWIRE) { - /* - * Initialize PHY(LXT971A): - * - * Generally, on power up, the LXT971A reads its configuration - * pins to check for forced operation, If not cofigured for - * forced operation, it uses auto-negotiation/parallel detection - * to automatically determine line operating conditions. - * If the PHY device on the other side of the link supports - * auto-negotiation, the LXT971A auto-negotiates with it - * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not - * support auto-negotiation, the LXT971A automatically detects - * the presence of either link pulses(10Mbps PHY) or Idle - * symbols(100Mbps) and sets its operating conditions accordingly. - * - * When auto-negotiation is controlled by software, the following - * steps are recommended. - * - * Note: - * The physical address is dependent on hardware configuration. - * - */ - int timeout = 1; - u16 phyStatus; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x8000); - udelay (1000); - - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#ifdef DEBUG - printf ("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); - /* - miiphy_write(fec, phyAddr, 0x0, 0x0100); - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay (10000); - if ((timeout--) == 0) { -#ifdef DEBUG - printf ("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#ifdef DEBUG - printf ("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay (10000); - if ((timeout--) == 0) { - printf ("failed. Link is down.\n"); - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#ifdef DEBUG - printf ("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#ifdef DEBUG - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 5000; - do { - udelay (1000); - - if ((timeout--) == 0) { -#ifdef DEBUG - printf ("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != - 0) { -#ifdef DEBUG - printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#ifdef DEBUG - printf ("PHY auto neg complete! \n"); -#endif - } - - } - - /* - * Enable FEC-Lite controller - */ - fec->eth->ecntrl |= 0x00000006; - -#ifdef DEBUG - if (fec->xcv_type != SEVENWIRE) - mpc8220_fec_phydump (dev->name); -#endif - - /* - * Enable SmartDMA receive task - */ - DMA_TASK_ENABLE (FEC_RECV_TASK_NO); - -#ifdef DEBUG - printf ("mpc8220_fec_init... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static void mpc8220_fec_halt (struct eth_device *dev) -{ - mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; - int counter = 0xffff; - -#ifdef DEBUG - if (fec->xcv_type != SEVENWIRE) - mpc8220_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))); - - /* - * Disable SmartDMA tasks - */ - DMA_TASK_DISABLE (FEC_XMIT_TASK_NO); - DMA_TASK_DISABLE (FEC_RECV_TASK_NO); - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Clear FIFO status registers - */ - fec->eth->rfifo_status &= 0x00700000; - fec->eth->tfifo_status &= 0x00700000; - - fec->eth->reset_cntrl = 0x01000000; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay (10); - -#ifdef DEBUG - printf ("Ethernet task stopped\n"); -#endif -} - -#ifdef DEBUG -/********************************************************************/ - -static void tfifo_print (char *devname, mpc8220_fec_priv * fec) -{ - u16 phyAddr = CONFIG_PHY_ADDR; - u16 phyStatus; - - if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) - || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { - - miiphy_read (devname, phyAddr, 0x1, &phyStatus); - printf ("\nphyStatus: 0x%04x\n", phyStatus); - printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf ("ievent: 0x%08x\n", fec->eth->ievent); - printf ("x_status: 0x%08x\n", fec->eth->x_status); - printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status); - - printf (" control 0x%08x\n", fec->eth->tfifo_cntrl); - printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); - printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); - printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm); - printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr); - printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr); - } -} - -static void rfifo_print (char *devname, mpc8220_fec_priv * fec) -{ - u16 phyAddr = CONFIG_PHY_ADDR; - u16 phyStatus; - - if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) - || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { - - miiphy_read (devname, phyAddr, 0x1, &phyStatus); - printf ("\nphyStatus: 0x%04x\n", phyStatus); - printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf ("ievent: 0x%08x\n", fec->eth->ievent); - printf ("x_status: 0x%08x\n", fec->eth->x_status); - printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status); - - printf (" control 0x%08x\n", fec->eth->rfifo_cntrl); - printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); - printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); - printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm); - printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr); - printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr); - } -} -#endif /* DEBUG */ - -/********************************************************************/ - -static int mpc8220_fec_send(struct eth_device *dev, void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; - FEC_TBD *pTbd; - -#ifdef DEBUG - printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status); - tfifo_print (dev->name, fec); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc8220_fec_tbd_scrub (fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#ifdef DEBUG - printf ("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->tbdBase[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (u32) eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - -#ifdef DEBUG - printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); -#endif - - /* - * Kick the MII i/f - */ - if (fec->xcv_type != SEVENWIRE) { - u16 phyStatus; - - miiphy_read (dev->name, 0, 0x1, &phyStatus); - } - - /* - * Enable SmartDMA transmit task - */ - -#ifdef DEBUG - tfifo_print (dev->name, fec); -#endif - - DMA_TASK_ENABLE (FEC_XMIT_TASK_NO); - -#ifdef DEBUG - tfifo_print (dev->name, fec); -#endif - -#ifdef DEBUG - printf ("+"); -#endif - - fec->cleanTbdNum -= 1; - -#ifdef DEBUG - printf ("smartDMA ethernet Tx task enabled\n"); -#endif - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay (10); -#ifdef DEBUG - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc8220_fec_recv (struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv; - FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; - unsigned long ievent; - int frame_length, len = 0; - NBUF *frame; - -#ifdef DEBUG - printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex); - printf ("-"); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc8220_fec_halt (dev); - mpc8220_fec_init (dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc8220_fec_halt (dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc8220_fec_init (dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if ((pRbd->status & FEC_RBD_LAST) - && !(pRbd->status & FEC_RBD_ERR) - && ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer address and size - */ - frame = (NBUF *) pRbd->dataPointer; - frame_length = pRbd->dataLength - 4; - - /* DEBUG code */ - if (_DEBUG) { - int i; - - printf ("recv data hdr:"); - for (i = 0; i < 14; i++) - printf ("%x ", *(frame->head + i)); - printf ("\n"); - } - - /* - * Fill the buffer and pass it to upper layers - */ -/* memcpy(buff, frame->head, 14); - memcpy(buff + 14, frame->data, frame_length);*/ - NetReceive((uchar *)pRbd->dataPointer, frame_length); - len = frame_length; - } - /* - * Reset buffer descriptor as empty - */ - mpc8220_fec_rbd_clean (fec, pRbd); - } - DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); - return len; -} - - -/********************************************************************/ -int mpc8220_fec_initialize (bd_t * bis) -{ - mpc8220_fec_priv *fec; - -#ifdef CONFIG_HAS_ETH1 - mpc8220_fec_priv *fec2; -#endif - struct eth_device *dev; - char *tmp, *end; - char env_enetaddr[6]; - -#ifdef CONFIG_HAS_ETH1 - char env_enet1addr[6]; -#endif - int i; - - fec = (mpc8220_fec_priv *) malloc (sizeof (*fec)); - dev = (struct eth_device *) malloc (sizeof (*dev)); - memset (dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *) MMAP_FEC1; -#ifdef CONFIG_HAS_ETH1 - fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec)); - fec2->eth = (ethernet_regs *) MMAP_FEC2; -#endif - fec->tbdBase = (FEC_TBD *) FEC_BD_BASE; - fec->rbdBase = - (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD)); - fec->xcv_type = MII100; - - dev->priv = (void *) fec; - dev->iobase = MMAP_FEC1; - dev->init = mpc8220_fec_init; - dev->halt = mpc8220_fec_halt; - dev->send = mpc8220_fec_send; - dev->recv = mpc8220_fec_recv; - - sprintf (dev->name, "FEC"); - eth_register (dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register (dev->name, - fec8220_miiphy_read, fec8220_miiphy_write); -#endif - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv ("ethaddr"); - if (tmp) { - for (i = 0; i < 6; i++) { - env_enetaddr[i] = - tmp ? simple_strtoul (tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end + 1 : end; - } - mpc8220_fec_set_hwaddr (fec, env_enetaddr); - } -#ifdef CONFIG_HAS_ETH1 - tmp = getenv ("eth1addr"); - if (tmp) { - for (i = 0; i < 6; i++) { - env_enet1addr[i] = - tmp ? simple_strtoul (tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end + 1 : end; - } - mpc8220_fec_set_hwaddr (fec2, env_enet1addr); - } -#endif - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec8220_miiphy_read (const char *devname, u8 phyAddr, u8 regAddr, u16 *retVal) -{ - ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1; - u32 reg; /* convenient holder for the PHY register */ - u32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = - (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy - | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))); - - if (timeout == 0) { -#ifdef DEBUG - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - *retVal = (u16) eth->mii_data; - - return 0; -} - -/********************************************************************/ -int fec8220_miiphy_write(const char *devname, u8 phyAddr, u8 regAddr, u16 data) -{ - ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1; - u32 reg; /* convenient holder for the PHY register */ - u32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))); - - if (timeout == 0) { -#ifdef DEBUG - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} - -#endif /* CONFIG_MPC8220_FEC */ diff --git a/arch/powerpc/cpu/mpc8220/fec.h b/arch/powerpc/cpu/mpc8220/fec.h deleted file mode 100644 index a8927fc..0000000 --- a/arch/powerpc/cpu/mpc8220/fec.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.h - * (C) Copyright Motorola, Inc., 2000 - * - * odin ethernet header file - */ - -#ifndef __MPC8220_FEC_H -#define __MPC8220_FEC_H - -#include <common.h> -#include <mpc8220.h> -#include "dma.h" - -typedef struct ethernet_register_set { - -/* [10:2]addr = 00 */ - -/* Control and status Registers (offset 000-1FF) */ - - volatile u32 fec_id; /* MBAR_ETH + 0x000 */ - volatile u32 ievent; /* MBAR_ETH + 0x004 */ - volatile u32 imask; /* MBAR_ETH + 0x008 */ - - volatile u32 RES0[1]; /* MBAR_ETH + 0x00C */ - volatile u32 r_des_active; /* MBAR_ETH + 0x010 */ - volatile u32 x_des_active; /* MBAR_ETH + 0x014 */ - volatile u32 r_des_active_cl; /* MBAR_ETH + 0x018 */ - volatile u32 x_des_active_cl; /* MBAR_ETH + 0x01C */ - volatile u32 ivent_set; /* MBAR_ETH + 0x020 */ - volatile u32 ecntrl; /* MBAR_ETH + 0x024 */ - - volatile u32 RES1[6]; /* MBAR_ETH + 0x028-03C */ - volatile u32 mii_data; /* MBAR_ETH + 0x040 */ - volatile u32 mii_speed; /* MBAR_ETH + 0x044 */ - volatile u32 mii_status; /* MBAR_ETH + 0x048 */ - - volatile u32 RES2[5]; /* MBAR_ETH + 0x04C-05C */ - volatile u32 mib_data; /* MBAR_ETH + 0x060 */ - volatile u32 mib_control; /* MBAR_ETH + 0x064 */ - - volatile u32 RES3[6]; /* MBAR_ETH + 0x068-7C */ - volatile u32 r_activate; /* MBAR_ETH + 0x080 */ - volatile u32 r_cntrl; /* MBAR_ETH + 0x084 */ - volatile u32 r_hash; /* MBAR_ETH + 0x088 */ - volatile u32 r_data; /* MBAR_ETH + 0x08C */ - volatile u32 ar_done; /* MBAR_ETH + 0x090 */ - volatile u32 r_test; /* MBAR_ETH + 0x094 */ - volatile u32 r_mib; /* MBAR_ETH + 0x098 */ - volatile u32 r_da_low; /* MBAR_ETH + 0x09C */ - volatile u32 r_da_high; /* MBAR_ETH + 0x0A0 */ - - volatile u32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */ - volatile u32 x_activate; /* MBAR_ETH + 0x0C0 */ - volatile u32 x_cntrl; /* MBAR_ETH + 0x0C4 */ - volatile u32 backoff; /* MBAR_ETH + 0x0C8 */ - volatile u32 x_data; /* MBAR_ETH + 0x0CC */ - volatile u32 x_status; /* MBAR_ETH + 0x0D0 */ - volatile u32 x_mib; /* MBAR_ETH + 0x0D4 */ - volatile u32 x_test; /* MBAR_ETH + 0x0D8 */ - volatile u32 fdxfc_da1; /* MBAR_ETH + 0x0DC */ - volatile u32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */ - volatile u32 paddr1; /* MBAR_ETH + 0x0E4 */ - volatile u32 paddr2; /* MBAR_ETH + 0x0E8 */ - volatile u32 op_pause; /* MBAR_ETH + 0x0EC */ - - volatile u32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */ - volatile u32 instr_reg; /* MBAR_ETH + 0x100 */ - volatile u32 context_reg; /* MBAR_ETH + 0x104 */ - volatile u32 test_cntrl; /* MBAR_ETH + 0x108 */ - volatile u32 acc_reg; /* MBAR_ETH + 0x10C */ - volatile u32 ones; /* MBAR_ETH + 0x110 */ - volatile u32 zeros; /* MBAR_ETH + 0x114 */ - volatile u32 iaddr1; /* MBAR_ETH + 0x118 */ - volatile u32 iaddr2; /* MBAR_ETH + 0x11C */ - volatile u32 gaddr1; /* MBAR_ETH + 0x120 */ - volatile u32 gaddr2; /* MBAR_ETH + 0x124 */ - volatile u32 random; /* MBAR_ETH + 0x128 */ - volatile u32 rand1; /* MBAR_ETH + 0x12C */ - volatile u32 tmp; /* MBAR_ETH + 0x130 */ - - volatile u32 RES6[3]; /* MBAR_ETH + 0x134-13C */ - volatile u32 fifo_id; /* MBAR_ETH + 0x140 */ - volatile u32 x_wmrk; /* MBAR_ETH + 0x144 */ - volatile u32 fcntrl; /* MBAR_ETH + 0x148 */ - volatile u32 r_bound; /* MBAR_ETH + 0x14C */ - volatile u32 r_fstart; /* MBAR_ETH + 0x150 */ - volatile u32 r_count; /* MBAR_ETH + 0x154 */ - volatile u32 r_lag; /* MBAR_ETH + 0x158 */ - volatile u32 r_read; /* MBAR_ETH + 0x15C */ - volatile u32 r_write; /* MBAR_ETH + 0x160 */ - volatile u32 x_count; /* MBAR_ETH + 0x164 */ - volatile u32 x_lag; /* MBAR_ETH + 0x168 */ - volatile u32 x_retry; /* MBAR_ETH + 0x16C */ - volatile u32 x_write; /* MBAR_ETH + 0x170 */ - volatile u32 x_read; /* MBAR_ETH + 0x174 */ - - volatile u32 RES7[2]; /* MBAR_ETH + 0x178-17C */ - volatile u32 fm_cntrl; /* MBAR_ETH + 0x180 */ - volatile u32 rfifo_data; /* MBAR_ETH + 0x184 */ - volatile u32 rfifo_status; /* MBAR_ETH + 0x188 */ - volatile u32 rfifo_cntrl; /* MBAR_ETH + 0x18C */ - volatile u32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */ - volatile u32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */ - volatile u32 rfifo_alarm; /* MBAR_ETH + 0x198 */ - volatile u32 rfifo_rdptr; /* MBAR_ETH + 0x19C */ - volatile u32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */ - volatile u32 tfifo_data; /* MBAR_ETH + 0x1A4 */ - volatile u32 tfifo_status; /* MBAR_ETH + 0x1A8 */ - volatile u32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */ - volatile u32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */ - volatile u32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */ - volatile u32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */ - volatile u32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */ - volatile u32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */ - - volatile u32 reset_cntrl; /* MBAR_ETH + 0x1C4 */ - volatile u32 xmit_fsm; /* MBAR_ETH + 0x1C8 */ - - volatile u32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */ - volatile u32 rdes_data0; /* MBAR_ETH + 0x1D8 */ - volatile u32 rdes_data1; /* MBAR_ETH + 0x1DC */ - volatile u32 r_length; /* MBAR_ETH + 0x1E0 */ - volatile u32 x_length; /* MBAR_ETH + 0x1E4 */ - volatile u32 x_addr; /* MBAR_ETH + 0x1E8 */ - volatile u32 cdes_data; /* MBAR_ETH + 0x1EC */ - volatile u32 status; /* MBAR_ETH + 0x1F0 */ - volatile u32 dma_control; /* MBAR_ETH + 0x1F4 */ - volatile u32 des_cmnd; /* MBAR_ETH + 0x1F8 */ - volatile u32 data; /* MBAR_ETH + 0x1FC */ - - /* MIB COUNTERS (Offset 200-2FF) */ - - volatile u32 rmon_t_drop; /* MBAR_ETH + 0x200 */ - volatile u32 rmon_t_packets; /* MBAR_ETH + 0x204 */ - volatile u32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ - volatile u32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ - volatile u32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ - volatile u32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ - volatile u32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ - volatile u32 rmon_t_frag; /* MBAR_ETH + 0x21C */ - volatile u32 rmon_t_jab; /* MBAR_ETH + 0x220 */ - volatile u32 rmon_t_col; /* MBAR_ETH + 0x224 */ - volatile u32 rmon_t_p64; /* MBAR_ETH + 0x228 */ - volatile u32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ - volatile u32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ - volatile u32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ - volatile u32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ - volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */ - volatile u32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ - volatile u32 rmon_t_octets; /* MBAR_ETH + 0x244 */ - volatile u32 ieee_t_drop; /* MBAR_ETH + 0x248 */ - volatile u32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ - volatile u32 ieee_t_1col; /* MBAR_ETH + 0x250 */ - volatile u32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ - volatile u32 ieee_t_def; /* MBAR_ETH + 0x258 */ - volatile u32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ - volatile u32 ieee_t_excol; /* MBAR_ETH + 0x260 */ - volatile u32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ - volatile u32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ - volatile u32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ - volatile u32 t_fdxfc; /* MBAR_ETH + 0x270 */ - volatile u32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ - - volatile u32 RES9[2]; /* MBAR_ETH + 0x278-27C */ - volatile u32 rmon_r_drop; /* MBAR_ETH + 0x280 */ - volatile u32 rmon_r_packets; /* MBAR_ETH + 0x284 */ - volatile u32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ - volatile u32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ - volatile u32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ - volatile u32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ - volatile u32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ - volatile u32 rmon_r_frag; /* MBAR_ETH + 0x29C */ - volatile u32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ - - volatile u32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ - - volatile u32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ - volatile u32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ - volatile u32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ - volatile u32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ - volatile u32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ - volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */ - volatile u32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ - volatile u32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ - volatile u32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ - volatile u32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ - volatile u32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ - volatile u32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ - volatile u32 r_macerr; /* MBAR_ETH + 0x2D8 */ - volatile u32 r_fdxfc; /* MBAR_ETH + 0x2DC */ - volatile u32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ - - volatile u32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */ - - volatile u32 RES11[64]; /* MBAR_ETH + 0x300-3FF */ -} ethernet_regs; - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - u16 status; - u16 dataLength; - u32 dataPointer; -} FEC_RBD; - -typedef struct { - u16 status; - u16 dataLength; - u32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -typedef struct { - ethernet_regs *eth; - xceiver_type xcv_type; /* transceiver type */ - FEC_RBD *rbdBase; /* RBD ring */ - FEC_TBD *tbdBase; /* TBD ring */ - u16 rbdIndex; /* next receive BD to read */ - u16 tbdIndex; /* next transmit BD to send */ - u16 usedTbdIndex; /* next transmit BD to clean */ - u16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc8220_fec_priv; - -/* Ethernet parameter area */ -#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00) -#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04) -#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08) -#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c) - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_PKT_SIZE 1536 - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_INT 0x1000 /* Interrupt */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_INT 0x1000 /* Interrupt */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC8220_FEC_H */ diff --git a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S b/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S deleted file mode 100644 index 3f8a03b..0000000 --- a/arch/powerpc/cpu/mpc8220/fec_dma_tasks.S +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright (C) 2004, Freescale Semiconductor, Inc. - * - * This file contains microcode for the FEC controller of the MPC8220. - */ - -#include <config.h> - -#if defined(CONFIG_MPC8220) - -/* sas/sccg, gas target */ -.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ -.section smartdmaTaskTable,"aw",@progbits /* Task tables */ -.align 9 -.globl taskTable -taskTable: -.globl scEthernetRecv_Entry -scEthernetRecv_Entry: /* Task 0 */ -.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */ -.long scEthernetRecv_TDT - taskTable + 0x00000094 -.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */ -.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */ -.long 0xf0000000 -.globl scEthernetXmit_Entry -scEthernetXmit_Entry: /* Task 1 */ -.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */ -.long scEthernetXmit_TDT - taskTable + 0x000000e0 -.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */ -.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */ -.long 0xf0000000 - - -.globl scEthernetRecv_TDT -scEthernetRecv_TDT: /* Task 0 Descriptor Table */ -.long 0xc4c50000 /* 0000(153): LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */ -.long 0x84c5e000 /* 0004(153): LCD: idx1 = var9 + var11; ; idx1 += inc0 */ -.long 0x10001f08 /* 0008(156): DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000380 /* 000C(157): DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f88 /* 0010(158): DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014(162): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018(164): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C(165): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x010cf04c /* 0020(165): DRD2B1: var4 = EU3(); EU3(var1,var12) */ -.long 0x82180349 /* 0024(169): LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */ -.long 0x81c68004 /* 0028(172): LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x70000000 /* 002C(174): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018cf04e /* 0030(174): DRD2B1: var6 = EU3(); EU3(var1,var14) */ -.long 0x70000000 /* 0034(175): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x020cf04f /* 0038(175): DRD2B1: var8 = EU3(); EU3(var1,var15) */ -.long 0x00000b88 /* 003C(176): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x80025184 /* 0040(205): LCDEXT: idx1 = 0xf0009184; ; */ -.long 0x86810412 /* 0044(205): LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */ -.long 0x0200cf88 /* 0048(209): DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */ -.long 0x80025184 /* 004C(217): LCDEXT: idx1 = 0xf0009184; ; */ -.long 0x8681845b /* 0050(217): LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */ -.long 0x0000cf88 /* 0054(221): DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0xc31883a4 /* 0058(225): LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */ -.long 0x80190000 /* 005C(225): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008468 /* 0060(227): DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4038360 /* 0064(232): LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */ -.long 0x81c50000 /* 0068(233): LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */ -.long 0x1000cb18 /* 006C(235): DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 0070(236): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc418836d /* 0074(238): LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */ -.long 0x83990000 /* 0078(238): LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */ -.long 0x10000c00 /* 007C(240): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x0000c800 /* 0080(241): DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 0084(245): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 0088(247): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 008C(248): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080cf04c /* 0090(248): DRD2B1: idx0 = EU3(); EU3(var1,var12) */ -.long 0x000001f8 /* 0094(:0): NOP */ - - -.globl scEthernetXmit_TDT -scEthernetXmit_TDT: /* Task 1 Descriptor Table */ -.long 0x80095b00 /* 0000(280): LCDEXT: idx0 = 0xf0025b00; ; */ -.long 0x85c60004 /* 0004(280): LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x10002308 /* 0008(283): DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000f88 /* 000C(284): DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000380 /* 0010(285): DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014(288): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018(290): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C(291): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x024cf04d /* 0020(291): DRD2B1: var9 = EU3(); EU3(var1,var13) */ -.long 0x84980309 /* 0024(294): LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */ -.long 0xc0004003 /* 0028(297): LCDEXT: idx1 = 0x00000003; ; */ -.long 0x81c60004 /* 002C(297): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ -.long 0x70000000 /* 0030(299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x010cf04e /* 0034(299): DRD2B1: var4 = EU3(); EU3(var1,var14) */ -.long 0x70000000 /* 0038(300): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x014cf04f /* 003C(300): DRD2B1: var5 = EU3(); EU3(var1,var15) */ -.long 0x70000000 /* 0040(301): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x028cf050 /* 0044(301): DRD2B1: var10 = EU3(); EU3(var1,var16) */ -.long 0x70000000 /* 0048(302): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018cf051 /* 004C(302): DRD2B1: var6 = EU3(); EU3(var1,var17) */ -.long 0x10000b90 /* 0050(303): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 0054(304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x01ccf0a1 /* 0058(304): DRD2B1: var7 = EU3(); EU3(var2,idx1) */ -.long 0xc2988312 /* 005C(308): LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */ -.long 0x83490000 /* 0060(308): LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */ -.long 0x00001b10 /* 0064(310): DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */ -.long 0x800251a4 /* 0068(315): LCDEXT: idx1 = 0xf00091a4; ; */ -.long 0xc30104dc /* 006C(315): LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */ -.long 0x839a032d /* 0070(316): LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */ -.long 0x0220c798 /* 0074(321): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */ -.long 0x800251a4 /* 0078(329): LCDEXT: idx1 = 0xf00091a4; ; */ -.long 0x99198337 /* 007C(329): LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */ -.long 0x022ac798 /* 0080(333): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */ -.long 0x800251a4 /* 0084(350): LCDEXT: idx1 = 0xf00091a4; ; */ -.long 0xc1430000 /* 0088(350): LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */ -.long 0x82998312 /* 008C(351): LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */ -.long 0x0a2ac790 /* 0090(354): DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */ -.long 0x81988000 /* 0094(359): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x60000002 /* 0098(361): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */ -.long 0x0c4cfc4d /* 009C(361): DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */ -.long 0xc21883ad /* 00A0(365): LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */ -.long 0x80190000 /* 00A4(365): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008460 /* 00A8(367): DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4052305 /* 00AC(371): LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */ -.long 0x81ca0000 /* 00B0(372): LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */ -.long 0x1000c718 /* 00B4(374): DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 00B8(375): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188000 /* 00BC(378): LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */ -.long 0x85190312 /* 00C0(378): LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */ -.long 0x10000c00 /* 00C4(380): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x1000c400 /* 00C8(381): DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00008860 /* 00CC(382): DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 00D0(386): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 00D4(388): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 00D8(389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080cf04d /* 00DC(389): DRD2B1: idx0 = EU3(); EU3(var1,var13) */ -.long 0x000001f8 /* 00E0(:0): NOP */ - -.align 8 - -.globl scEthernetRecv_VarTab -scEthernetRecv_VarTab: /* Task 0 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0xf0025b00 /* var[9] */ -.long 0x00000008 /* var[10] */ -.long 0x0000000c /* var[11] */ -.long 0x80000000 /* var[12] */ -.long 0x00000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x20000000 /* var[15] */ -.long 0x00000800 /* var[16] */ -.long 0x00000001 /* var[17] */ -.long 0x00000000 /* var[18] */ -.long 0x00000000 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x20000004 /* inc[2] */ -.long 0x20000001 /* inc[3] */ -.long 0x80000000 /* inc[4] */ -.long 0x40000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetXmit_VarTab -scEthernetXmit_VarTab: /* Task 1 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0x00000000 /* var[9] */ -.long 0x00000000 /* var[10] */ -.long 0xf0025b00 /* var[11] */ -.long 0x00000000 /* var[12] */ -.long 0x80000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x08000000 /* var[15] */ -.long 0x20000000 /* var[16] */ -.long 0x0000ffff /* var[17] */ -.long 0xffffffff /* var[18] */ -.long 0x00000004 /* var[19] */ -.long 0x00000008 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x40000000 /* inc[2] */ -.long 0xc000fffc /* inc[3] */ -.long 0xe0000004 /* inc[4] */ -.long 0x80000000 /* inc[5] */ -.long 0x4000ffff /* inc[6] */ -.long 0xe0000001 /* inc[7] */ - -.align 8 - -.globl scEthernetRecv_FDT -scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x21800000 /* and(), EU# 3 */ -.long 0x21e00000 /* or(), EU# 3 */ -.long 0x21400000 /* andn(), EU# 3 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - -.align 8 - -.globl scEthernetXmit_FDT -scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x21800000 /* and(), EU# 3 */ -.long 0x21e00000 /* or(), EU# 3 */ -.long 0x21400000 /* andn(), EU# 3 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - - -.globl scEthernetRecv_CSave -scEthernetRecv_CSave: /* Task 0 context save space */ -.space 128, 0x0 - - -.globl scEthernetXmit_CSave -scEthernetXmit_CSave: /* Task 1 context save space */ -.space 128, 0x0 - -#endif diff --git a/arch/powerpc/cpu/mpc8220/i2c.c b/arch/powerpc/cpu/mpc8220/i2c.c deleted file mode 100644 index 2f35d20..0000000 --- a/arch/powerpc/cpu/mpc8220/i2c.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_HARD_I2C - -#include <mpc8220.h> -#include <i2c.h> - -typedef struct mpc8220_i2c { - volatile u32 adr; /* I2Cn + 0x00 */ - volatile u32 fdr; /* I2Cn + 0x04 */ - volatile u32 cr; /* I2Cn + 0x08 */ - volatile u32 sr; /* I2Cn + 0x0C */ - volatile u32 dr; /* I2Cn + 0x10 */ -} i2c_t; - -/* I2Cn control register bits */ -#define I2C_EN 0x80 -#define I2C_IEN 0x40 -#define I2C_STA 0x20 -#define I2C_TX 0x10 -#define I2C_TXAK 0x08 -#define I2C_RSTA 0x04 -#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) - -/* I2Cn status register bits */ -#define I2C_CF 0x80 -#define I2C_AAS 0x40 -#define I2C_BB 0x20 -#define I2C_AL 0x10 -#define I2C_SRW 0x04 -#define I2C_IF 0x02 -#define I2C_RXAK 0x01 - -#define I2C_TIMEOUT 100 -#define I2C_RETRIES 1 - -struct mpc8220_i2c_tap { - int scl2tap; - int tap2tap; -}; - -static int mpc_reg_in (volatile u32 * reg); -static void mpc_reg_out (volatile u32 * reg, int val, int mask); -static int wait_for_bb (void); -static int wait_for_pin (int *status); -static int do_address (uchar chip, char rdwr_flag); -static int send_bytes (uchar chip, char *buf, int len); -static int receive_bytes (uchar chip, char *buf, int len); -static int mpc_get_fdr (int); - -static int mpc_reg_in (volatile u32 * reg) -{ - int ret; - ret = *reg >> 24; - __asm__ __volatile__ ("eieio"); - return ret; -} - -static void mpc_reg_out (volatile u32 * reg, int val, int mask) -{ - int tmp; - - if (!mask) { - *reg = val << 24; - } else { - tmp = mpc_reg_in (reg); - *reg = ((tmp & ~mask) | (val & mask)) << 24; - } - __asm__ __volatile__ ("eieio"); - - return; -} - -static int wait_for_bb (void) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int timeout = I2C_TIMEOUT; - int status; - - status = mpc_reg_in (®s->sr); - - while (timeout-- && (status & I2C_BB)) { - - mpc_reg_out (®s->cr, I2C_STA, I2C_STA); - (void)mpc_reg_in (®s->dr); - mpc_reg_out (®s->cr, 0, I2C_STA); - mpc_reg_out (®s->cr, 0, 0); - mpc_reg_out (®s->cr, I2C_EN, 0); - - udelay (1000); - status = mpc_reg_in (®s->sr); - } - - return (status & I2C_BB); -} - -static int wait_for_pin (int *status) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int timeout = I2C_TIMEOUT; - - *status = mpc_reg_in (®s->sr); - - while (timeout-- && !(*status & I2C_IF)) { - udelay (1000); - *status = mpc_reg_in (®s->sr); - } - - if (!(*status & I2C_IF)) { - return -1; - } - - mpc_reg_out (®s->sr, 0, I2C_IF); - return 0; -} - -static int do_address (uchar chip, char rdwr_flag) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int status; - - chip <<= 1; - - if (rdwr_flag) - chip |= 1; - - mpc_reg_out (®s->cr, I2C_TX, I2C_TX); - mpc_reg_out (®s->dr, chip, 0); - - if (wait_for_pin (&status)) - return -2; - if (status & I2C_RXAK) - return -3; - return 0; -} - -static int send_bytes (uchar chip, char *buf, int len) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int wrcount; - int status; - - for (wrcount = 0; wrcount < len; ++wrcount) { - - mpc_reg_out (®s->dr, buf[wrcount], 0); - - if (wait_for_pin (&status)) - break; - - if (status & I2C_RXAK) - break; - - } - - return !(wrcount == len); - return 0; -} - -static int receive_bytes (uchar chip, char *buf, int len) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int dummy = 1; - int rdcount = 0; - int status; - int i; - - mpc_reg_out (®s->cr, 0, I2C_TX); - - for (i = 0; i < len; ++i) { - buf[rdcount] = mpc_reg_in (®s->dr); - - if (dummy) - dummy = 0; - else - rdcount++; - - if (wait_for_pin (&status)) - return -4; - } - - mpc_reg_out (®s->cr, I2C_TXAK, I2C_TXAK); - buf[rdcount++] = mpc_reg_in (®s->dr); - - if (wait_for_pin (&status)) - return -5; - - mpc_reg_out (®s->cr, 0, I2C_TXAK); - return 0; -} - -/**************** I2C API ****************/ - -void i2c_init (int speed, int saddr) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - - mpc_reg_out (®s->cr, 0, 0); - mpc_reg_out (®s->adr, saddr << 1, 0); - - /* Set clock - */ - mpc_reg_out (®s->fdr, mpc_get_fdr (speed), 0); - - /* Enable module - */ - mpc_reg_out (®s->cr, I2C_EN, I2C_INIT_MASK); - mpc_reg_out (®s->sr, 0, I2C_IF); - return; -} - -static int mpc_get_fdr (int speed) -{ - static int fdr = -1; - - if (fdr == -1) { - ulong best_speed = 0; - ulong divider; - ulong ipb, scl; - ulong bestmatch = 0xffffffffUL; - int best_i = 0, best_j = 0, i, j; - int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 }; - struct mpc8220_i2c_tap scltap[] = { - {4, 1}, - {4, 2}, - {6, 4}, - {6, 8}, - {14, 16}, - {30, 32}, - {62, 64}, - {126, 128} - }; - - ipb = gd->bus_clk; - for (i = 7; i >= 0; i--) { - for (j = 7; j >= 0; j--) { - scl = 2 * (scltap[j].scl2tap + - (SCL_Tap[i] - - 1) * scltap[j].tap2tap + 2); - if (ipb <= speed * scl) { - if ((speed * scl - ipb) < bestmatch) { - bestmatch = speed * scl - ipb; - best_i = i; - best_j = j; - best_speed = ipb / scl; - } - } - } - } - divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2); - if (gd->flags & GD_FLG_RELOC) { - fdr = divider; - } else { - printf ("%ld kHz, ", best_speed / 1000); - return divider; - } - } - - return fdr; -} - -int i2c_probe (uchar chip) -{ - i2c_t *regs = (i2c_t *) MMAP_I2C; - int i; - - for (i = 0; i < I2C_RETRIES; i++) { - mpc_reg_out (®s->cr, I2C_STA, I2C_STA); - - if (!do_address (chip, 0)) { - mpc_reg_out (®s->cr, 0, I2C_STA); - break; - } - - mpc_reg_out (®s->cr, 0, I2C_STA); - udelay (50); - } - - return (i == I2C_RETRIES); -} - -int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len) -{ - uchar xaddr[4]; - i2c_t *regs = (i2c_t *) MMAP_I2C; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb ()) { - printf ("i2c_read: bus is busy\n"); - goto Done; - } - - mpc_reg_out (®s->cr, I2C_STA, I2C_STA); - if (do_address (chip, 0)) { - printf ("i2c_read: failed to address chip\n"); - goto Done; - } - - if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) { - printf ("i2c_read: send_bytes failed\n"); - goto Done; - } - - mpc_reg_out (®s->cr, I2C_RSTA, I2C_RSTA); - if (do_address (chip, 1)) { - printf ("i2c_read: failed to address chip\n"); - goto Done; - } - - if (receive_bytes (chip, (char *)buf, len)) { - printf ("i2c_read: receive_bytes failed\n"); - goto Done; - } - - ret = 0; - Done: - mpc_reg_out (®s->cr, 0, I2C_STA); - return ret; -} - -int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len) -{ - uchar xaddr[4]; - i2c_t *regs = (i2c_t *) MMAP_I2C; - int ret = -1; - - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - - if (wait_for_bb ()) { - printf ("i2c_write: bus is busy\n"); - goto Done; - } - - mpc_reg_out (®s->cr, I2C_STA, I2C_STA); - if (do_address (chip, 0)) { - printf ("i2c_write: failed to address chip\n"); - goto Done; - } - - if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) { - printf ("i2c_write: send_bytes failed\n"); - goto Done; - } - - if (send_bytes (chip, (char *)buf, len)) { - printf ("i2c_write: send_bytes failed\n"); - goto Done; - } - - ret = 0; - Done: - mpc_reg_out (®s->cr, 0, I2C_STA); - return ret; -} - -#endif /* CONFIG_HARD_I2C */ diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.c b/arch/powerpc/cpu/mpc8220/i2cCore.c deleted file mode 100644 index b89ad03..0000000 --- a/arch/powerpc/cpu/mpc8220/i2cCore.c +++ /dev/null @@ -1,627 +0,0 @@ -/* I2cCore.c - MPC8220 PPC I2C Library */ - -/* Copyright 2004 Freescale Semiconductor, Inc. */ - -/* -modification history --------------------- -01c,29jun04,tcl 1.3 removed CR. Added two bytes offset support. -01b,19jan04,tcl 1.2 removed i2cMsDelay and sysDecGet. renamed i2cMsDelay - back to sysMsDelay -01a,19jan04,tcl 1.1 created and seperated from i2c.c -*/ - -/* -DESCRIPTION -This file contain I2C low level handling library functions -*/ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <vxWorks.h> -#include <sysLib.h> -#include <iosLib.h> -#include <logLib.h> -#include <tickLib.h> - -/* BSP Includes */ -#include "config.h" -#include "mpc8220.h" -#include "i2cCore.h" - -#ifdef DEBUG_I2CCORE -int I2CCDbg = 0; -#endif - -#define ABS(x) ((x < 0)? -x : x) - -char *I2CERR[16] = { - "Transfer in Progress\n", /* 0 */ - "Transfer complete\n", - "Not Addressed\n", /* 2 */ - "Addressed as a slave\n", - "Bus is Idle\n", /* 4 */ - "Bus is busy\n", - "Arbitration Lost\n", /* 6 */ - "Arbitration on Track\n", - "Slave receive, master writing to slave\n", /* 8 */ - "Slave transmit, master reading from slave\n", - "Interrupt is pending\n", /* 10 */ - "Interrupt complete\n", - "Acknowledge received\n", /* 12 */ - "No acknowledge received\n", - "Unknown status\n", /* 14 */ - "\n" -}; - -/****************************************************************************** - * - * chk_status - Check I2C status bit - * - * RETURNS: OK, or ERROR if the bit encounter - * - */ - -STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse) -{ - int i, status = 0; - - for (i = 0; i < I2C_POLL_COUNT; i++) { - if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0)) - return (OK); - } - - I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n", - pi2c->sr, sta_bit, truefalse, 0, 0, 0)); - - if (i == I2C_POLL_COUNT) { - switch (sta_bit) { - case I2C_STA_CF: - status = 0; - break; - case I2C_STA_AAS: - status = 2; - break; - case I2C_STA_BB: - status = 4; - break; - case I2C_STA_AL: - status = 6; - break; - case I2C_STA_SRW: - status = 8; - break; - case I2C_STA_IF: - status = 10; - break; - case I2C_STA_RXAK: - status = 12; - break; - default: - status = 14; - break; - } - - if (!truefalse) - status++; - - I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0)); - I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0)); - } - - return (ERROR); -} - -/****************************************************************************** - * - * I2C Enable - Enable the I2C Controller - * - */ -STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet) -{ - int fdr = pi2cSet->bit_rate; - UINT8 adr = pi2cSet->i2c_adr; - - I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0)); - - i2c_clear (pi2c); /* Clear FDR, ADR, SR and CR reg */ - - SetI2cFDR (pi2c, fdr); /* Frequency */ - pi2c->adr = adr; - - pi2c->cr = I2C_CTL_EN; /* Set Enable */ - - /* - The I2C bus should be in Idle state. If the bus is busy, - clear the STA bit in control register - */ - if (chk_status (pi2c, I2C_STA_BB, 0) != OK) { - if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA) - pi2c->cr &= ~I2C_CTL_STA; - - /* Check again if it is still busy, return error if found */ - if (chk_status (pi2c, I2C_STA_BB, 1) == OK) - return ERROR; - } - - return (OK); -} - -/****************************************************************************** - * - * I2C Disable - Disable the I2C Controller - * - */ -STATUS i2c_disable (PSI2C pi2c) -{ - i2c_clear (pi2c); - - pi2c->cr &= I2C_CTL_EN; /* Disable I2c */ - - if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA) - pi2c->cr &= ~I2C_CTL_STA; - - if (chk_status (pi2c, I2C_STA_BB, 0) != OK) - return ERROR; - - return (OK); -} - -/****************************************************************************** - * - * I2C Clear - Clear the I2C Controller - * - */ -STATUS i2c_clear (PSI2C pi2c) -{ - pi2c->adr = 0; - pi2c->fdr = 0; - pi2c->cr = 0; - pi2c->sr = 0; - - return (OK); -} - - -STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet) -{ -#ifdef TWOBYTES - UINT16 ByteOffset = pi2cSet->str_adr; -#else - UINT8 ByteOffset = pi2cSet->str_adr; -#endif -#if 1 - UINT8 tmp = 0; -#endif - UINT8 Addr = pi2cSet->slv_adr; - - pi2c->cr |= I2C_CTL_STA; /* Generate start signal */ - - if (chk_status (pi2c, I2C_STA_BB, 1) != OK) - return ERROR; - - /* Write slave address */ - if (i2c_writebyte (pi2c, &Addr) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } -#ifdef TWOBYTES -# if 0 - /* Issue the offset to start */ - if (i2c_write2byte (pi2c, &ByteOffset) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } -#endif - tmp = (ByteOffset >> 8) & 0xff; - if (i2c_writebyte (pi2c, &tmp) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } - tmp = ByteOffset & 0xff; - if (i2c_writebyte (pi2c, &tmp) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } -#else - if (i2c_writebyte (pi2c, &ByteOffset) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } -#endif - - return (OK); -} - -STATUS i2c_stop (PSI2C pi2c) -{ - pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */ - if (chk_status (pi2c, I2C_STA_BB, 0) != OK) - return ERROR; - - return (OK); -} - -/****************************************************************************** - * - * Read Len bytes to the location pointed to by *Data from the device - * with address Addr. - */ -int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data) -{ - int i = 0; - UINT8 Tmp; - -/* UINT8 ByteOffset = pi2cSet->str_adr; not used? */ - UINT8 Addr = pi2cSet->slv_adr; - int Length = pi2cSet->xfer_size; - - I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n", - Addr, (int) Data, Length, ByteOffset, 0, 0)); - - if (pi2c->sr & I2C_STA_AL) { /* Check if Arbitration lost */ - I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0)); - pi2c->sr &= ~I2C_STA_AL; /* Clear Arbitration status bit */ - return ERROR; - } - - pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */ - - if (i2c_start (pi2c, pi2cSet) == ERROR) - return ERROR; - - pi2c->cr |= I2C_CTL_RSTA; /* Repeat Start */ - - Tmp = Addr | 1; - - if (i2c_writebyte (pi2c, &Tmp) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } - - if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01)) - return ERROR; - - pi2c->cr &= ~I2C_CTL_TX; /* Set receive mode */ - - if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01)) - return ERROR; - - /* Dummy Read */ - if (i2c_readbyte (pi2c, &Tmp, &i) != OK) { - i2c_stop (pi2c); /* Disable I2c */ - return ERROR; - } - - i = 0; - while (Length) { - if (Length == 2) - pi2c->cr |= I2C_CTL_TXAK; - - if (Length == 1) - pi2c->cr &= ~I2C_CTL_STA; - - if (i2c_readbyte (pi2c, Data, &Length) != OK) { - return i2c_stop (pi2c); - } - i++; - Length--; - Data++; - } - - if (i2c_stop (pi2c) == ERROR) - return ERROR; - - return i; -} - -STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data) -{ - int Length = pi2cSet->xfer_size; - -#ifdef TWOBYTES - UINT16 ByteOffset = pi2cSet->str_adr; -#else - UINT8 ByteOffset = pi2cSet->str_adr; -#endif - int j, k; - - I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0)); - - if (pi2c->sr & I2C_STA_AL) { - /* Check if arbitration lost */ - I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0)); - pi2c->sr &= ~I2C_STA_AL; /* Clear the condition */ - return ERROR; - } - - pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */ - - /* Do the not even offset first */ - if ((ByteOffset % 8) != 0) { - int remain; - - if (Length > 8) { - remain = 8 - (ByteOffset % 8); - Length -= remain; - - pi2cSet->str_adr = ByteOffset; - - if (i2c_start (pi2c, pi2cSet) == ERROR) - return ERROR; - - for (j = ByteOffset; j < remain; j++) { - if (i2c_writebyte (pi2c, Data++) != OK) - return ERROR; - } - - if (i2c_stop (pi2c) == ERROR) - return ERROR; - - sysMsDelay (32); - - /* Update the new ByteOffset */ - ByteOffset += remain; - } - } - - for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) { - if ((j % 8) == 0) { - pi2cSet->str_adr = j; - if (i2c_start (pi2c, pi2cSet) == ERROR) - return ERROR; - } - - k++; - - if (i2c_writebyte (pi2c, Data++) != OK) - return ERROR; - - if ((j == (Length - 1)) || ((k % 8) == 0)) { - if (i2c_stop (pi2c) == ERROR) - return ERROR; - - sysMsDelay (50); - } - - } - - return k; -} - -STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index) -{ - pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */ - *readb = pi2c->dr; /* Read a byte */ - - /* - Set I2C_CTRL_TXAK will cause Transfer pending and - set I2C_CTRL_STA will cause Interrupt pending - */ - if (*index != 2) { - if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */ - return ERROR; - } - - if (*index != 1) { - if (chk_status (pi2c, I2C_STA_IF, 1) != OK) - return ERROR; - } - - return (OK); -} - - -STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb) -{ - pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt */ - pi2c->dr = *writeb; /* Write a byte */ - - if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */ - return ERROR; - - if (chk_status (pi2c, I2C_STA_IF, 1) != OK) - return ERROR; - - return OK; -} - -STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb) -{ - UINT8 data; - - data = (UINT8) ((*writeb >> 8) & 0xff); - if (i2c_writebyte (pi2c, &data) != OK) - return ERROR; - data = (UINT8) (*writeb & 0xff); - if (i2c_writebyte (pi2c, &data) != OK) - return ERROR; - return OK; -} - -/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls -FDR FDR scl sda scl2tap2 -510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5 -000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0 -000 001 9 3 4 2 44 Clocks 11 Clocks 758 KHz 0 0 1 0 0 0 -000 010 9 3 6 4 80 Clocks 17 Clocks 417 KHz 0 0 0 1 0 0 -000 011 9 3 6 8 144 Clocks 25 Clocks 231 KHz 0 0 1 1 0 0 -000 100 9 3 14 16 288 Clocks 49 Clocks 116 KHz 0 0 0 0 1 0 -000 101 9 3 30 32 576 Clocks 97 Clocks 58 KHz 0 0 1 0 1 0 -000 110 9 3 62 64 1152 Clocks 193 Clocks 29 KHz 0 0 0 1 1 0 -000 111 9 3 126 128 2304 Clocks 385 Clocks 14 KHz 0 0 1 1 1 0 -001 000 10 3 4 1 30 Clocks 9 Clocks 1111 KHz1 0 0 0 0 0 -001 001 10 3 4 2 48 Clocks 11 Clocks 694 KHz 1 0 1 0 0 0 -001 010 10 3 6 4 88 Clocks 17 Clocks 379 KHz 1 0 0 1 0 0 -001 011 10 3 6 8 160 Clocks 25 Clocks 208 KHz 1 0 1 1 0 0 -001 100 10 3 14 16 320 Clocks 49 Clocks 104 KHz 1 0 0 0 1 0 -001 101 10 3 30 32 640 Clocks 97 Clocks 52 KHz 1 0 1 0 1 0 -001 110 10 3 62 64 1280 Clocks 193 Clocks 26 KHz 1 0 0 1 1 0 -001 111 10 3 126 128 2560 Clocks 385 Clocks 13 KHz 1 0 1 1 1 0 -010 000 12 4 4 1 34 Clocks 10 Clocks 980 KHz 0 1 0 0 0 0 -010 001 12 4 4 2 56 Clocks 13 Clocks 595 KHz 0 1 1 0 0 0 -010 010 12 4 6 4 104 Clocks 21 Clocks 321 KHz 0 1 0 1 0 0 -010 011 12 4 6 8 192 Clocks 33 Clocks 174 KHz 0 1 1 1 0 0 -010 100 12 4 14 16 384 Clocks 65 Clocks 87 KHz 0 1 0 0 1 0 -010 101 12 4 30 32 768 Clocks 129 Clocks 43 KHz 0 1 1 0 1 0 -010 110 12 4 62 64 1536 Clocks 257 Clocks 22 KHz 0 1 0 1 1 0 -010 111 12 4 126 128 3072 Clocks 513 Clocks 11 KHz 0 1 1 1 1 0 -011 000 15 4 4 1 40 Clocks 10 Clocks 833 KHz 1 1 0 0 0 0 -011 001 15 4 4 2 68 Clocks 13 Clocks 490 KHz 1 1 1 0 0 0 -011 010 15 4 6 4 128 Clocks 21 Clocks 260 KHz 1 1 0 1 0 0 -011 011 15 4 6 8 240 Clocks 33 Clocks 139 KHz 1 1 1 1 0 0 -011 100 15 4 14 16 480 Clocks 65 Clocks 69 KHz 1 1 0 0 1 0 -011 101 15 4 30 32 960 Clocks 129 Clocks 35 KHz 1 1 1 0 1 0 -011 110 15 4 62 64 1920 Clocks 257 Clocks 17 KHz 1 1 0 1 1 0 -011 111 15 4 126 128 3840 Clocks 513 Clocks 9 KHz 1 1 1 1 1 0 -100 000 5 1 4 1 20 Clocks 7 Clocks 1667 KHz 0 0 0 0 0 1 -100 001 5 1 4 2 28 Clocks 7 Clocks 1190 KHz 0 0 1 0 0 1 -100 010 5 1 6 4 48 Clocks 9 Clocks 694 KHz 0 0 0 1 0 1 -100 011 5 1 6 8 80 Clocks 9 Clocks 417 KHz 0 0 1 1 0 1 -100 100 5 1 14 16 160 Clocks 17 Clocks 208 KHz 0 0 0 0 1 1 -100 101 5 1 30 32 320 Clocks 33 Clocks 104 KHz 0 0 1 0 1 1 -100 110 5 1 62 64 640 Clocks 65 Clocks 52 KHz 0 0 0 1 1 1 -100 111 5 1 126 128 1280 Clocks 129 Clocks 26 KHz 0 0 1 1 1 1 -101 000 6 1 4 1 22 Clocks 7 Clocks 1515 KHz 1 0 0 0 0 1 -101 001 6 1 4 2 32 Clocks 7 Clocks 1042 KHz 1 0 1 0 0 1 -101 010 6 1 6 4 56 Clocks 9 Clocks 595 KHz 1 0 0 1 0 1 -101 011 6 1 6 8 96 Clocks 9 Clocks 347 KHz 1 0 1 1 0 1 -101 100 6 1 14 16 192 Clocks 17 Clocks 174 KHz 1 0 0 0 1 1 -101 101 6 1 30 32 384 Clocks 33 Clocks 87 KHz 1 0 1 0 1 1 -101 110 6 1 62 64 768 Clocks 65 Clocks 43 KHz 1 0 0 1 1 1 -101 111 6 1 126 128 1536 Clocks 129 Clocks 22 KHz 1 0 1 1 1 1 -110 000 7 2 4 1 24 Clocks 8 Clocks 1389 KHz 0 1 0 0 0 1 -110 001 7 2 4 2 36 Clocks 9 Clocks 926 KHz 0 1 1 0 0 1 -110 010 7 2 6 4 64 Clocks 13 Clocks 521 KHz 0 1 0 1 0 1 -110 011 7 2 6 8 112 Clocks 17 Clocks 298 KHz 0 1 1 1 0 1 -110 100 7 2 14 16 224 Clocks 33 Clocks 149 KHz 0 1 0 0 1 1 -110 101 7 2 30 32 448 Clocks 65 Clocks 74 KHz 0 1 1 0 1 1 -110 110 7 2 62 64 896 Clocks 129 Clocks 37 KHz 0 1 0 1 1 1 -110 111 7 2 126 128 1792 Clocks 257 Clocks 19 KHz 0 1 1 1 1 1 -111 000 8 2 4 1 26 Clocks 8 Clocks 1282 KHz 1 1 0 0 0 1 -111 001 8 2 4 2 40 Clocks 9 Clocks 833 KHz 1 1 1 0 0 1 -111 010 8 2 6 4 72 Clocks 13 Clocks 463 KHz 1 1 0 1 0 1 -111 011 8 2 6 8 128 Clocks 17 Clocks 260 KHz 1 1 1 1 0 1 -111 100 8 2 14 16 256 Clocks 33 Clocks 130 KHz 1 1 0 0 1 1 -111 101 8 2 30 32 512 Clocks 65 Clocks 65 KHz 1 1 1 0 1 1 -111 110 8 2 62 64 1024 Clocks 129 Clocks 33 KHz 1 1 0 1 1 1 -111 111 8 2 126 128 2048 Clocks 257 Clocks 16 KHz 1 1 1 1 1 1 -*/ -STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate) -{ -/* Constants */ - const UINT8 div_hold[8][3] = { {9, 3}, {10, 3}, - {12, 4}, {15, 4}, - {5, 1}, {6, 1}, - {7, 2}, {8, 2} - }; - - const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2}, - {6, 4}, {6, 8}, - {14, 16}, {30, 32}, - {62, 64}, {126, 128} - }; - - UINT8 mfdr_bits; - - int i = 0; - int j = 0; - - int Diff, min; - int WhichFreq, iRec, jRec; - int SCL_Period; - int SCL_Hold; - int I2C_Freq; - - I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n", - bitrate, (int) pi2cRegs, 0, 0, 0, 0)); - - if (bitrate < 0) { - I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0)); - return ERROR; - } - - /* Initialize */ - mfdr_bits = 0; - min = 0x7fffffff; - WhichFreq = iRec = jRec = 0; - - for (i = 0; i < 8; i++) { - for (j = 0; j < 8; j++) { - /* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2) - * SCL Hold = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3 - * Bit Rate (I2C Freq) = System Freq / SCL Period - */ - SCL_Period = - 2 * (scl_tap[i][0] + - ((div_hold[j][0] - 1) * scl_tap[i][1]) + - 2); - - /* Now get the I2C Freq */ - I2C_Freq = DEV_CLOCK_FREQ / SCL_Period; - - /* Take equal or slower */ - if (I2C_Freq > bitrate) - continue; - - /* Take the differences */ - Diff = I2C_Freq - bitrate; - - Diff = ABS (Diff); - - /* Find the closer value */ - if (Diff < min) { - min = Diff; - WhichFreq = I2C_Freq; - iRec = i; - jRec = j; - } - - I2CCDBG (L2, - ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n", - i, j, I2C_Freq, Diff, min, 0)); - } - } - - SCL_Period = - 2 * (scl_tap[iRec][0] + - ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2); - - I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n", - min, WhichFreq, iRec, jRec, 0, 0)); - I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n", - scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1], - 0, 0, 0)); - - /* This may no require */ - SCL_Hold = - scl_tap[iRec][0] + - ((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3; - I2CCDBG (L2, - ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0, - 0, 0, 0)); - - I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0)); - - /* FDR 4,3,2 */ - if ((iRec & 1) == 1) - mfdr_bits |= 0x04; /* FDR 2 */ - if ((iRec & 2) == 2) - mfdr_bits |= 0x08; /* FDR 3 */ - if ((iRec & 4) == 4) - mfdr_bits |= 0x10; /* FDR 4 */ - /* FDR 5,1,0 */ - if ((jRec & 1) == 1) - mfdr_bits |= 0x01; /* FDR 0 */ - if ((jRec & 2) == 2) - mfdr_bits |= 0x02; /* FDR 1 */ - if ((jRec & 4) == 4) - mfdr_bits |= 0x20; /* FDR 5 */ - - I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0)); - - pi2cRegs->fdr = mfdr_bits; - - return OK; -} diff --git a/arch/powerpc/cpu/mpc8220/i2cCore.h b/arch/powerpc/cpu/mpc8220/i2cCore.h deleted file mode 100644 index 72783fd..0000000 --- a/arch/powerpc/cpu/mpc8220/i2cCore.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * i2cCore.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __INCi2ccoreh -#define __INCi2ccoreh -#ifndef __ASSEMBLY__ -/* device types */ -#define I2C_DEVICE_TYPE_EEPROM 0 -#define I2C_EEPROM_ADRS 0xa0 -#define I2C_CTRL_ADRS I2C_EEPROM_ADRS -#define EEPROM_ADDR0 0xA2 /* on Dimm SPD eeprom */ -#define EEPROM_ADDR1 0xA4 /* on Board SPD eeprom */ -#define EEPROM_ADDR2 0xD2 /* non-standard eeprom - clock generator */ -/* Control Register */ -#define I2C_CTL_EN 0x80 /* I2C Enable */ -#define I2C_CTL_IEN 0x40 /* I2C Interrupt Enable */ -#define I2C_CTL_STA 0x20 /* Master/Slave Mode select */ -#define I2C_CTL_TX 0x10 /* Transmit/Receive Mode Select */ -#define I2C_CTL_TXAK 0x08 /* Transmit Acknowledge Enable */ -#define I2C_CTL_RSTA 0x04 /* Repeat Start */ -/* Status Register */ -#define I2C_STA_CF 0x80 /* Data Transfer */ -#define I2C_STA_AAS 0x40 /* Adressed As Slave */ -#define I2C_STA_BB 0x20 /* Bus Busy */ -#define I2C_STA_AL 0x10 /* Arbitration Lost */ -#define I2C_STA_SRW 0x04 /* Slave Read/Write */ -#define I2C_STA_IF 0x02 /* I2C Interrupt */ -#define I2C_STA_RXAK 0x01 /* Receive Acknowledge */ -/* Interrupt Contol Register */ -#define I2C_INT_BNBE2 0x80 /* Bus Not Busy Enable 2 */ -#define I2C_INT_TE2 0x40 /* Transmit Enable 2 */ -#define I2C_INT_RE2 0x20 /* Receive Enable 2 */ -#define I2C_INT_IE2 0x10 /* Interrupt Enable 2 */ -#define I2C_INT_BNBE1 0x08 /* Bus Not Busy Enable 1 */ -#define I2C_INT_TE1 0x04 /* Transmit Enable 1 */ -#define I2C_INT_RE1 0x02 /* Receive Enable 1 */ -#define I2C_INT_IE1 0x01 /* Interrupt Enable 1 */ -#define I2C_POLL_COUNT 0x100000 -#define I2C_ENABLE 0x00000001 -#define I2C_DISABLE 0x00000002 -#define I2C_START 0x00000004 -#define I2C_REPSTART 0x00000008 -#define I2C_STOP 0x00000010 -#define I2C_BITRATE 0x00000020 -#define I2C_SLAVEADR 0x00000040 -#define I2C_STARTADR 0x00000080 -#undef TWOBYTES -typedef struct i2c_settings { - /* Device settings */ - int bit_rate; /* Device bit rate */ - u8 i2c_adr; /* I2C address */ - u8 slv_adr; /* Slave address */ -#ifdef TWOBYTES - u16 str_adr; /* Start address */ -#else - u8 str_adr; /* Start address */ -#endif - int xfer_size; /* Transfer Size */ - - int bI2c_en; /* Enable or Disable */ - int cmdFlag; /* I2c Command Flags */ -} i2cset_t; - -/* -int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse); -int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet); -int i2c_disable(PSI2C pi2c); -int i2c_start(PSI2C pi2c, PI2CSET pi2cSet); -int i2c_stop(PSI2C pi2c); -int i2c_clear(PSI2C pi2c); -int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data); -int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data); -int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index); -int i2c_writebyte(PSI2C pi2c, u8 *writeb); -int SetI2cFDR( PSI2C pi2cRegs, int bitrate ); -*/ -#endif /* __ASSEMBLY__ */ - -#endif /* __INCi2ccoreh */ diff --git a/arch/powerpc/cpu/mpc8220/interrupts.c b/arch/powerpc/cpu/mpc8220/interrupts.c deleted file mode 100644 index 9544d85..0000000 --- a/arch/powerpc/cpu/mpc8220/interrupts.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright -2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * interrupts.c - just enough support for the decrementer/timer - */ - -#include <common.h> -#include <asm/processor.h> -#include <command.h> - -int interrupt_init_cpu (ulong * decrementer_count) -{ - *decrementer_count = get_tbclk () / CONFIG_SYS_HZ; - - return (0); -} - -/****************************************************************************/ - -/* - * Handle external interrupts - */ -void external_interrupt (struct pt_regs *regs) -{ - puts ("external_interrupt (oops!)\n"); -} - -void timer_interrupt_cpu (struct pt_regs *regs) -{ - /* nothing to do here */ - return; -} - -/****************************************************************************/ - -/* - * Install and free a interrupt handler. - */ - -void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg) -{ - -} - -void irq_free_handler (int vec) -{ - -} - -/****************************************************************************/ - -void -do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[]) -{ - puts ("IRQ related functions are unimplemented currently.\n"); -} diff --git a/arch/powerpc/cpu/mpc8220/io.S b/arch/powerpc/cpu/mpc8220/io.S deleted file mode 100644 index 5ecdf55..0000000 --- a/arch/powerpc/cpu/mpc8220/io.S +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Andreas Heppel <aheppel@sysgo.de> - * Copyright (C) 2003 Wolfgang Denk <wd@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <ppc_asm.tmpl> - -/* ------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16 */ -/* Description: Input 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in16 -in16: - lhz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16r */ -/* Description: Input 16 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in16r -in16r: - lhbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0(3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32r */ -/* Description: Input 32 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in32r -in32r: - lwbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16 */ -/* Description: Output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16 -out16: - sth r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16r */ -/* Description: Byte reverse and output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16r -out16r: - sthbrx r4,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32r */ -/* Description: Byte reverse and output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32r -out32r: - stwbrx r4,0,r3 - sync - blr diff --git a/arch/powerpc/cpu/mpc8220/loadtask.c b/arch/powerpc/cpu/mpc8220/loadtask.c deleted file mode 100644 index 6d8b627..0000000 --- a/arch/powerpc/cpu/mpc8220/loadtask.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on code - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc8220.h> - -/* Multichannel DMA microcode */ -extern int taskTable; - -void loadtask (int basetask, int tasks) -{ - int *sram = (int *) (MMAP_SRAM + 512); - int *task_org = &taskTable; - unsigned int start, offset, end; - int i; - -#ifdef DEBUG - printf ("basetask = %d, tasks = %d\n", basetask, tasks); - printf ("task_org = 0x%08x\n", (unsigned int) task_org); -#endif - - /* setup TaskBAR register */ - *(vu_long *) MMAP_DMA = (MMAP_SRAM + 512); - - /* relocate task table entries */ - offset = (unsigned int) sram; - for (i = basetask; i < basetask + tasks; i++) { - sram[i * 8 + 0] = task_org[i * 8 + 0] + offset; - sram[i * 8 + 1] = task_org[i * 8 + 1] + offset; - sram[i * 8 + 2] = task_org[i * 8 + 2] + offset; - sram[i * 8 + 3] = task_org[i * 8 + 3] + offset; - sram[i * 8 + 4] = task_org[i * 8 + 4]; - sram[i * 8 + 5] = task_org[i * 8 + 5]; - sram[i * 8 + 6] = task_org[i * 8 + 6] + offset; - sram[i * 8 + 7] = task_org[i * 8 + 7]; - } - - /* relocate task descriptors */ - start = (sram[basetask * 8] - (unsigned int) sram); - end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram); - -#ifdef DEBUG - printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end); -#endif - - start /= 4; - end /= 4; - for (i = start; i <= end; i++) { - sram[i] = task_org[i]; - } - - /* relocate variables */ - start = (sram[basetask * 8 + 2] - (unsigned int) sram); - end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 - - (unsigned int) sram); - start /= 4; - end /= 4; - for (i = start; i < end; i++) { - sram[i] = task_org[i]; - } - - /* relocate function decriptors */ - start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram); - end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 - - (unsigned int) sram); - start /= 4; - end /= 4; - for (i = start; i < end; i++) { - sram[i] = task_org[i]; - } - - asm volatile ("sync"); -} diff --git a/arch/powerpc/cpu/mpc8220/pci.c b/arch/powerpc/cpu/mpc8220/pci.c deleted file mode 100644 index 7ef43b7..0000000 --- a/arch/powerpc/cpu/mpc8220/pci.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Copyright 2004 Freescale Semiconductor. - * Copyright (C) 2003 Motorola Inc. - * Xianghua Xiao (x.xiao@motorola.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * PCI Configuration space access support for MPC8220 PCI Bridge - */ -#include <common.h> -#include <mpc8220.h> -#include <pci.h> -#include <asm/io.h> - -#if defined(CONFIG_PCI) - -/* System RAM mapped over PCI */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define cfg_read(val, addr, type, op) *val = op((type)(addr)); -#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); - -#define PCI_OP(rw, size, type, op, mask) \ -int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - u32 addr = 0; \ - u16 cfg_type = 0; \ - addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \ - out_be32(hose->cfg_addr, addr); \ - __asm__ __volatile__("sync"); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - out_be32(hose->cfg_addr, addr & 0x7fffffff); \ - __asm__ __volatile__("sync"); \ - return 0; \ -} - -PCI_OP(read, byte, u8 *, in_8, 3) -PCI_OP(read, word, u16 *, in_le16, 2) -PCI_OP(write, byte, u8, out_8, 3) -PCI_OP(write, word, u16, out_le16, 2) -PCI_OP(write, dword, u32, out_le32, 0) - -int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev, - int offset, u32 *val) -{ - u32 addr; - u32 tmpv; - u32 mask = 2; /* word access */ - /* Read lower 16 bits */ - addr = ((offset & 0xfc) | (dev) | 0x80000000); - out_be32(hose->cfg_addr, addr); - __asm__ __volatile__("sync"); - *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); - out_be32(hose->cfg_addr, addr & 0x7fffffff); - __asm__ __volatile__("sync"); - - /* Read upper 16 bits */ - offset += 2; - addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000); - out_be32(hose->cfg_addr, addr); - __asm__ __volatile__("sync"); - tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask))); - out_be32(hose->cfg_addr, addr & 0x7fffffff); - __asm__ __volatile__("sync"); - - /* combine results into dword value */ - *val = (tmpv << 16) | *val; - - return 0; -} - -void -pci_mpc8220_init(struct pci_controller *hose) -{ - u32 win0, win1, win2; - volatile mpc8220_xcpci_t *xcpci = - (volatile mpc8220_xcpci_t *) MMAP_XCPCI; - - volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG; - - win0 = (u32) CONFIG_PCI_MEM_PHYS; - win1 = (u32) CONFIG_PCI_IO_PHYS; - win2 = (u32) CONFIG_PCI_CFG_PHYS; - - /* Assert PCI reset */ - out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR); - - /* Disable prefetching but read-multiples will still prefetch */ - out_be32 (&xcpci->target_ctrl, 0x00000000); - - /* Initiator windows */ - out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000); - out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 )); - out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 )); - - out_be32 (&xcpci->init_win_cfg, - PCI_INIT_WIN_CFG_WIN0_CTRL_EN | - PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO | - PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO); - - out_be32 (&xcpci->init_ctrl, 0x00000000); - - /* Enable bus master and mem access */ - out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M); - - /* Cache line size and master latency */ - out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT)); - - out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */ - out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */ - - out_be32 (&xcpci->target_bar0, - PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN); - out_be32 (&xcpci->target_bar1, - PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN); - - /* Deassert reset bit */ - out_be32 (&xcpci->glb_stat_ctl, 0x00000000); - - /* Enable PCI bus master support */ - /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, - PCIREQ2, PCIGNT2 */ - out_be32((volatile u32 *)&portcfg->pcfg3, - (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F)); - out_be32((volatile u32 *)&portcfg->pcfg3, - (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180)); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - pci_set_region(hose->regions + 0, - CONFIG_PCI_MEM_BUS, - CONFIG_PCI_MEM_PHYS, - CONFIG_PCI_MEM_SIZE, - PCI_REGION_MEM); - - pci_set_region(hose->regions + 1, - CONFIG_PCI_IO_BUS, - CONFIG_PCI_IO_PHYS, - CONFIG_PCI_IO_SIZE, - PCI_REGION_IO); - - pci_set_region(hose->regions + 2, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - CONFIG_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 3; - - hose->cfg_addr = &(xcpci->cfg_adr); - hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS; - - pci_set_ops(hose, - mpc8220_pci_read_config_byte, - mpc8220_pci_read_config_word, - mpc8220_pci_read_config_dword, - mpc8220_pci_write_config_byte, - mpc8220_pci_write_config_word, - mpc8220_pci_write_config_dword); - - /* Hose scan */ - pci_register_hose(hose); - hose->last_busno = pci_hose_scan(hose); - - out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */ - out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */ -} - -#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/cpu/mpc8220/speed.c b/arch/powerpc/cpu/mpc8220/speed.c deleted file mode 100644 index bb72e5c..0000000 --- a/arch/powerpc/cpu/mpc8220/speed.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8220.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -typedef struct pllmultiplier { - u8 hid1; - int multi; - int vco_div; -} pllcfg_t; - -/* ------------------------------------------------------------------------- */ - -/* - * - */ - -int get_clocks (void) -{ - pllcfg_t bus2core[] = { - {0x02, 2, 8}, /* 1 */ - {0x01, 2, 4}, - {0x0C, 3, 8}, /* 1.5 */ - {0x00, 3, 4}, - {0x18, 3, 2}, - {0x05, 4, 4}, /* 2 */ - {0x04, 4, 2}, - {0x11, 5, 4}, /* 2.5 */ - {0x06, 5, 2}, - {0x10, 6, 4}, /* 3 */ - {0x08, 6, 2}, - {0x0E, 7, 2}, /* 3.5 */ - {0x0A, 8, 2}, /* 4 */ - {0x07, 9, 2}, /* 4.5 */ - {0x0B, 10, 2}, /* 5 */ - {0x09, 11, 2}, /* 5.5 */ - {0x0D, 12, 2}, /* 6 */ - {0x12, 13, 2}, /* 6.5 */ - {0x14, 14, 2}, /* 7 */ - {0x16, 15, 2}, /* 7.5 */ - {0x1C, 16, 2} /* 8 */ - }; - u32 hid1; - int i, size, pci2bus; - -#if !defined(CONFIG_SYS_MPC8220_CLKIN) -#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN -#endif - - gd->arch.inp_clk = CONFIG_SYS_MPC8220_CLKIN; - - /* Read XLB to PCI(INP) clock multiplier */ - pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) & - PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT; - - /* XLB bus clock */ - gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus; - - /* PCI clock is same as input clock */ - gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN; - - /* FlexBus is temporary set as the same as input clock */ - /* will do dynamic in the future */ - gd->arch.flb_clk = CONFIG_SYS_MPC8220_CLKIN; - - /* CPU Clock - Read HID1 */ - asm volatile ("mfspr %0, 1009":"=r" (hid1):); - - size = sizeof (bus2core) / sizeof (pllcfg_t); - - hid1 >>= 27; - - for (i = 0; i < size; i++) - if (hid1 == bus2core[i].hid1) { - gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1; - gd->arch.vco_clk = - CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * - (gd->pci_clk * bus2core[i].vco_div) / 2; - break; - } - - /* hardcoded 81MHz for now */ - gd->arch.pev_clk = 81000000; - - return (0); -} - -int prt_mpc8220_clks (void) -{ - char buf1[32], buf2[32], buf3[32], buf4[32]; - - printf (" Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n", - strmhz(buf1, gd->bus_clk), - strmhz(buf2, gd->cpu_clk), - strmhz(buf3, gd->pci_clk), - strmhz(buf4, gd->arch.vco_clk) - ); - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S deleted file mode 100644 index 6295631..0000000 --- a/arch/powerpc/cpu/mpc8220/start.S +++ /dev/null @@ -1,734 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * U-Boot - Startup Code for MPC8220 CPUs - */ -#include <asm-offsets.h> -#include <config.h> -#include <mpc8220.h> -#include <version.h> - -#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/u-boot.h> - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -/* Floating Point enable, Machine Check and Recoverable Interr. */ -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * Version string - */ - .data - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - -/* - * Exception vectors - */ - .text - . = EXC_OFF_SYS_RESET - .globl _start -_start: - mfmsr r5 /* save msr contents */ - - /* replace default MBAR base address from 0x80000000 - to 0xf0000000 */ - -#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) - lis r3, CONFIG_SYS_MBAR@h - ori r3, r3, CONFIG_SYS_MBAR@l - - /* MBAR is mirrored into the MBAR SPR */ - mtspr MBAR,r3 - mtspr SPRN_SPRG7W,r3 - lis r4, CONFIG_SYS_DEFAULT_MBAR@h - stw r3, 0(r4) -#endif /* CONFIG_SYS_DEFAULT_MBAR */ - - /* Initialise the MPC8220 processor core */ - /*--------------------------------------------------------------*/ - - bl init_8220_core - - /* initialize some things that are hard to access from C */ - /*--------------------------------------------------------------*/ - - /* set up stack in on-chip SRAM */ - lis r3, CONFIG_SYS_INIT_RAM_ADDR@h - ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET - - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*--------------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - bl cpu_init_f /* run low-level CPU init code (in Flash)*/ - - bl board_init_f /* run 1st part of board init code (in Flash)*/ - - /* NOTREACHED - board_init_f() does not return */ - -/* - * Vector Table - */ - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) -#ifdef DEBUG - . = 0x1300 - /* - * This exception occurs when the program counter matches the - * Instruction Address Breakpoint Register (IABR). - * - * I want the cpu to halt if this occurs so I can hunt around - * with the debugger and look at things. - * - * When DEBUG is defined, both machine check enable (in the MSR) - * and checkstop reset enable (in the reset mode register) are - * turned off and so a checkstop condition will result in the cpu - * halting. - * - * I force the cpu into a checkstop condition by putting an illegal - * instruction here (at least this is the theory). - * - * well - that didnt work, so just do an infinite loop! - */ -1: b 1b -#else - STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException) -#endif - STD_EXCEPTION(0x1400, SMI, UnknownException) - - STD_EXCEPTION(0x1500, Trap_15, UnknownException) - STD_EXCEPTION(0x1600, Trap_16, UnknownException) - STD_EXCEPTION(0x1700, Trap_17, UnknownException) - STD_EXCEPTION(0x1800, Trap_18, UnknownException) - STD_EXCEPTION(0x1900, Trap_19, UnknownException) - STD_EXCEPTION(0x1a00, Trap_1a, UnknownException) - STD_EXCEPTION(0x1b00, Trap_1b, UnknownException) - STD_EXCEPTION(0x1c00, Trap_1c, UnknownException) - STD_EXCEPTION(0x1d00, Trap_1d, UnknownException) - STD_EXCEPTION(0x1e00, Trap_1e, UnknownException) - STD_EXCEPTION(0x1f00, Trap_1f, UnknownException) - STD_EXCEPTION(0x2000, Trap_20, UnknownException) - STD_EXCEPTION(0x2100, Trap_21, UnknownException) - STD_EXCEPTION(0x2200, Trap_22, UnknownException) - STD_EXCEPTION(0x2300, Trap_23, UnknownException) - STD_EXCEPTION(0x2400, Trap_24, UnknownException) - STD_EXCEPTION(0x2500, Trap_25, UnknownException) - STD_EXCEPTION(0x2600, Trap_26, UnknownException) - STD_EXCEPTION(0x2700, Trap_27, UnknownException) - STD_EXCEPTION(0x2800, Trap_28, UnknownException) - STD_EXCEPTION(0x2900, Trap_29, UnknownException) - STD_EXCEPTION(0x2a00, Trap_2a, UnknownException) - STD_EXCEPTION(0x2b00, Trap_2b, UnknownException) - STD_EXCEPTION(0x2c00, Trap_2c, UnknownException) - STD_EXCEPTION(0x2d00, Trap_2d, UnknownException) - STD_EXCEPTION(0x2e00, Trap_2e, UnknownException) - STD_EXCEPTION(0x2f00, Trap_2f, UnknownException) - - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* - * This code initialises the MPC8220 processor core - * (conforms to PowerPC 603e spec) - * Note: expects original MSR contents to be in r5. - */ - - .globl init_8220_core -init_8220_core: - - /* Initialize machine status; enable machine check interrupt */ - /*--------------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */ -#endif - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Make SRR1 match MSR */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - /* Enable Extra BATs */ - mfspr r3, 1011 /* HID2 */ - lis r4, 0x0004 - ori r4, r4, 0x0000 - or r4, r4, r3 - mtspr 1011, r4 - sync - - /* clear all BAT's */ - /*--------------------------------------------------------------*/ - - li r0, 0 - mtspr DBAT0U, r0 - mtspr DBAT0L, r0 - mtspr DBAT1U, r0 - mtspr DBAT1L, r0 - mtspr DBAT2U, r0 - mtspr DBAT2L, r0 - mtspr DBAT3U, r0 - mtspr DBAT3L, r0 - mtspr DBAT4U, r0 - mtspr DBAT4L, r0 - mtspr DBAT5U, r0 - mtspr DBAT5L, r0 - mtspr DBAT6U, r0 - mtspr DBAT6L, r0 - mtspr DBAT7U, r0 - mtspr DBAT7L, r0 - mtspr IBAT0U, r0 - mtspr IBAT0L, r0 - mtspr IBAT1U, r0 - mtspr IBAT1L, r0 - mtspr IBAT2U, r0 - mtspr IBAT2L, r0 - mtspr IBAT3U, r0 - mtspr IBAT3L, r0 - mtspr IBAT4U, r0 - mtspr IBAT4L, r0 - mtspr IBAT5U, r0 - mtspr IBAT5L, r0 - mtspr IBAT6U, r0 - mtspr IBAT6L, r0 - mtspr IBAT7U, r0 - mtspr IBAT7L, r0 - SYNC - - /* invalidate all tlb's */ - /* */ - /* From the 603e User Manual: "The 603e provides the ability to */ - /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */ - /* instruction invalidates the TLB entry indexed by the EA, and */ - /* operates on both the instruction and data TLBs simultaneously*/ - /* invalidating four TLB entries (both sets in each TLB). The */ - /* index corresponds to bits 15-19 of the EA. To invalidate all */ - /* entries within both TLBs, 32 tlbie instructions should be */ - /* issued, incrementing this field by one each time." */ - /* */ - /* "Note that the tlbia instruction is not implemented on the */ - /* 603e." */ - /* */ - /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */ - /* incrementing by 0x1000 each time. The code below is sort of */ - /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */ - /* */ - /*--------------------------------------------------------------*/ - - li r3, 32 - mtctr r3 - li r3, 0 -1: tlbie r3 - addi r3, r3, 0x1000 - bdnz 1b - SYNC - - /* Done! */ - /*--------------------------------------------------------------*/ - - blr - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - lis r4, 0 - ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */ - rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */ - - /* - * The setting of the instruction cache enable (ICE) bit must be - * preceded by an isync instruction to prevent the cache from being - * enabled or disabled while an instruction access is in progress. - */ - isync - mtspr HID0, r4 /* Enable Instr Cache & Inval cache */ - mtspr HID0, r3 /* using 2 consec instructions */ - isync - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - rlwinm r3, r3, 0, 17, 15 /* clear the ICE bit */ - mtspr HID0, r3 - isync - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31 - blr - - .globl dcache_enable -dcache_enable: - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit */ - rlwinm r3, r4, 0, 22, 20 /* clear the DCFI bit */ - - /* Enable address translation in MSR bit */ - mfmsr r5 - ori r5, r5, 0x - - - /* - * The setting of the instruction cache enable (ICE) bit must be - * preceded by an isync instruction to prevent the cache from being - * enabled or disabled while an instruction access is in progress. - */ - isync - mtspr HID0, r4 /* Enable Data Cache & Inval cache*/ - mtspr HID0, r3 /* using 2 consec instructions */ - isync - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - rlwinm r3, r3, 0, 18, 16 /* clear the DCE bit */ - mtspr HID0, r3 - isync - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31 - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mfspr r7,HID0 /* don't do dcbst if dcache is disabled */ - rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31 - cmpwi r7,0 - beq 9f - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ -9: mfspr r7,HID0 /* don't do icbi if icache is disabled */ - rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31 - cmpwi r7,0 - beq 7f - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c deleted file mode 100644 index 19d6cb5..0000000 --- a/arch/powerpc/cpu/mpc8220/traps.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * linux/arch/powerpc/kernel/traps.c - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de) - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * This file handles the architecture-dependent parts of hardware exceptions - */ - -#include <common.h> -#include <command.h> -#include <kgdb.h> -#include <asm/processor.h> - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* THIS NEEDS CHANGING to use the board info structure. -*/ -#define END_OF_MEM 0x02000000 - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint) sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) - break; - sp = (unsigned long *) *sp; - } - printf("\n"); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, - regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0, - regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0); - - printf("\n"); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) { - printf("\n"); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *) regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d", regs->nip, signr); -} - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup = search_exception_table(regs->nip); - - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. - */ - if (fixup) { - regs->nip = fixup; - return; - } -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - printf("Machine check in kernel mode.\n"); - printf("Caused by (from msr): "); - printf("regs %p ", regs); - /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */ - switch (regs->msr & 0x000F0000) { - case (0x80000000 >> 12): - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000 >> 13): - printf("Transfer error ack signal\n"); - break; - case (0x80000000 >> 14): - printf("Data parity signal\n"); - break; - case (0x80000000 >> 15): - printf("Address parity signal\n"); - break; - default: - printf("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *) regs->gpr[1]); - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *) regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *) regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *) regs->gpr[1]); - panic("Software Emulation Exception"); -} - - -void UnknownException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -#if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint(struct pt_regs *); -#endif - -void DebugException(struct pt_regs *regs) -{ - - printf("Debugger trap at @ %lx\n", regs->nip); - show_regs(regs); -#if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint(regs); -#endif -} - -/* Probe an address by reading. If not present, return -1, otherwise - * return 0. - */ -int addr_probe(uint *addr) -{ -#if 0 - int retval; - - __asm__ __volatile__ ("1: lwz %0,0(%1)\n" - " eieio\n" - " li %0,0\n" - "2:\n" - ".section .fixup,\"ax\"\n" - "3: li %0,-1\n" - " b 2b\n" - ".section __ex_table,\"a\"\n" - " .align 2\n" - " .long 1b,3b\n" - ".text":"=r" (retval):"r" (addr)); - - return (retval); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds deleted file mode 100644 index dc63d20..0000000 --- a/arch/powerpc/cpu/mpc8220/u-boot.lds +++ /dev/null @@ -1,91 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - .text : - { - arch/powerpc/cpu/mpc8220/start.o (.text*) - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c deleted file mode 100644 index 772528f..0000000 --- a/arch/powerpc/cpu/mpc8220/uart.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2004, Freescale, Inc - * TsiChung Liew, Tsi-Chung.Liew@freescale.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Minimal serial functions needed to use one of the PSC ports - * as serial console interface. - */ - -#include <common.h> -#include <mpc8220.h> -#include <serial.h> -#include <linux/compiler.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define PSC_BASE MMAP_PSC1 - -#if defined(CONFIG_PSC_CONSOLE) -static int mpc8220_serial_init(void) -{ - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; - u32 counter; - - /* write to SICR: SIM2 = uart mode,dcd does not affect rx */ - psc->cr = 0; - psc->ipcr_acr = 0; - psc->isr_imr = 0; - - /* write to CSR: RX/TX baud rate from timers */ - psc->sr_csr = 0xdd000000; - - psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1; - - /* Setting up BaudRate */ - counter = ((gd->bus_clk / gd->baudrate)) >> 5; - counter++; - - /* write to CTUR: divide counter upper byte */ - psc->ctur = ((counter & 0xff00) << 16); - /* write to CTLR: divide counter lower byte */ - psc->ctlr = ((counter & 0x00ff) << 24); - - psc->cr = PSC_CR_RST_RX_CMD; - psc->cr = PSC_CR_RST_TX_CMD; - psc->cr = PSC_CR_RST_ERR_STS_CMD; - psc->cr = PSC_CR_RST_BRK_INT_CMD; - psc->cr = PSC_CR_RST_MR_PTR_CMD; - - psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE; - return (0); -} - -static void mpc8220_serial_putc(const char c) -{ - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; - - if (c == '\n') - serial_putc ('\r'); - - /* Wait for last character to go. */ - while (!(psc->sr_csr & PSC_SR_TXRDY)); - - psc->xmitbuf[0] = c; -} - -static int mpc8220_serial_getc(void) -{ - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; - - /* Wait for a character to arrive. */ - while (!(psc->sr_csr & PSC_SR_RXRDY)); - return psc->xmitbuf[2]; -} - -static int mpc8220_serial_tstc(void) -{ - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; - - return (psc->sr_csr & PSC_SR_RXRDY); -} - -static void mpc8220_serial_setbrg(void) -{ - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; - u32 counter; - - counter = ((gd->bus_clk / gd->baudrate)) >> 5; - counter++; - - /* write to CTUR: divide counter upper byte */ - psc->ctur = ((counter & 0xff00) << 16); - /* write to CTLR: divide counter lower byte */ - psc->ctlr = ((counter & 0x00ff) << 24); - - psc->cr = PSC_CR_RST_RX_CMD; - psc->cr = PSC_CR_RST_TX_CMD; - - psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE; -} - -static struct serial_device mpc8220_serial_drv = { - .name = "mpc8220_serial", - .start = mpc8220_serial_init, - .stop = NULL, - .setbrg = mpc8220_serial_setbrg, - .putc = mpc8220_serial_putc, - .puts = default_serial_puts, - .getc = mpc8220_serial_getc, - .tstc = mpc8220_serial_tstc, -}; - -void mpc8220_serial_initialize(void) -{ - serial_register(&mpc8220_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &mpc8220_serial_drv; -} -#endif /* CONFIG_PSC_CONSOLE */ diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 6776c85..2318064 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -83,10 +83,12 @@ COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4160) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4420) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o COBJS-$(CONFIG_BSC9132) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T1040) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o COBJS-$(CONFIG_OF_LIBFDT) += fdt.o @@ -102,8 +104,10 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o +COBJS-$(CONFIG_PPC_T1040) += t1040_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o @@ -137,9 +141,11 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_T4160) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o +COBJS-$(CONFIG_PPC_T1040) += t1040_serdes.o COBJS-y += cpu.o COBJS-y += cpu_init.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 53713e3..4067f05 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -337,7 +337,7 @@ int enable_cluster_l2(void) while ((in_be32(&l2cache->l2csr0) & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) ; - out_be32(&l2cache->l2csr0, L2CSR0_L2E); + out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE); } i++; } while (!(cluster & TP_CLUSTER_EOC)); @@ -637,6 +637,28 @@ skip_l2: } #endif +#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) + ccsr_usb_phy_t *usb_phy = + (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; + setbits_be32(&usb_phy->pllprg[1], + CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_MFI | + CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN); + setbits_be32(&usb_phy->port1.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port1.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port1.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); + setbits_be32(&usb_phy->port2.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port2.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port2.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); +#endif + #ifdef CONFIG_FMAN_ENET fman_enet_init(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index dacfdd1..234fde4 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -180,12 +180,5 @@ void cpu_init_early_f(void) invalidate_tlb(1); -#if defined(CONFIG_SECURE_BOOT) - /* Disable the TLBs created by ISBC */ - for (i = CONFIG_SYS_ISBC_START_TLB; - i < CONFIG_SYS_ISBC_START_TLB + CONFIG_SYS_ISBC_NUM_TLBS; i++) - disable_tlb(i); -#endif - init_tlbs(); } diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ef0dd1d..c5b4720 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -142,7 +142,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, } } #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 - out_be32(&ddr->debug[28], 0x00003000); + out_be32(&ddr->debug[28], 0x30003000); #endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 01dcdf6..93eca76 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -164,7 +164,7 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) } cfg >>= sd_prctl_shift; - printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); if (!is_serdes_prtcl_valid(sd, cfg)) printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index 43d4836..861c8e0 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -80,6 +80,8 @@ int cpu_status(int nr) if (nr == id) { table = (u32 *)&__spin_table; printf("table base @ 0x%p\n", table); + } else if (is_core_disabled(nr)) { + puts("Disabled\n"); } else { table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index d529095..672edde 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -128,24 +128,32 @@ static int fdt_qportal(void *blob, int off, int id, char *name, childoff = fdt_subnode_offset(blob, off, name); if (create) { - if (childoff <= 0) - childoff = fdt_add_subnode(blob, off, name); + char handle[64], *p; - if (childoff > 0) { - char handle[64], *p; + strncpy(handle, name, sizeof(handle)); + p = strchr(handle, '@'); + if (!strncmp(name, "fman", 4)) { + *p = *(p + 1); + p++; + } + *p = '\0'; - strncpy(handle, name, sizeof(handle)); - p = strchr(handle, '@'); - if (!strncmp(name, "fman", 4)) { - *p = *(p + 1); - p++; - } - *p = '\0'; + dev_off = fdt_path_offset(blob, handle); + /* skip this node if alias is not found */ + if (dev_off == -FDT_ERR_BADPATH) + return 0; + if (dev_off < 0) + return dev_off; - dev_off = fdt_path_offset(blob, handle); - if (dev_off < 0) - return dev_off; + if (childoff <= 0) + childoff = fdt_add_subnode(blob, off, name); + /* need to update the dev_off after adding a subnode */ + dev_off = fdt_path_offset(blob, handle); + if (dev_off < 0) + return dev_off; + + if (childoff > 0) { dev_handle = fdt_get_phandle(blob, dev_off); if (dev_handle <= 0) { dev_handle = fdt_alloc_phandle(blob); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 5c4b1e3..a4a21b0 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -69,9 +69,9 @@ __secondary_start_page: #endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 - mfspr r3,977 + mfspr r3,SPRN_HDBCR1 oris r3,r3,0x0100 - mtspr 977,r3 + mtspr SPRN_HDBCR1,r3 #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 @@ -93,10 +93,10 @@ __secondary_start_page: 1: /* Erratum says set bits 55:60 to 001001 */ msync isync - mfspr r3,976 + mfspr r3,SPRN_HDBCR0 li r4,0x48 rlwimi r3,r4,0,0x1f8 - mtspr 976,r3 + mtspr SPRN_HDBCR0,r3 isync 2: #endif @@ -154,16 +154,12 @@ __secondary_start_page: ori r3,r3,toreset(__spin_table_addr)@l lwz r3,0(r3) - /* - * r10 has the base address for the entry. - * we cannot access it yet before setting up a new TLB - */ mfspr r0,SPRN_PIR -#if defined(CONFIG_E6500) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* - * PIR definition for E6500 + * PIR definition for Chassis 2 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2'b00 - SoC 1 + * 18-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved @@ -177,32 +173,33 @@ __secondary_start_page: * 2'b11 - core 3 * 29-31 THREAD_ID 3'b000 - thread 0 * 3'b001 - thread 1 + * + * Power-on PIR increments threads by 0x01, cores within a cluster by 0x08 + * and clusters by 0x20. + * + * We renumber PIR so that all threads in the system are consecutive. */ - rlwinm r4,r0,29,25,31 + + rlwinm r8,r0,29,0x03 /* r8 = core within cluster */ + srwi r10,r0,5 /* r10 = cluster */ + + mulli r5,r10,CONFIG_SYS_FSL_CORES_PER_CLUSTER + add r5,r5,r8 /* for spin table index */ + mulli r4,r5,CONFIG_SYS_FSL_THREADS_PER_CORE /* for PIR */ #elif defined(CONFIG_E500MC) rlwinm r4,r0,27,27,31 + mr r5,r4 #else mr r4,r0 + mr r5,r4 #endif - slwi r8,r4,6 /* spin table is padded to 64 byte */ - add r10,r3,r8 -#ifdef CONFIG_E6500 - mfspr r0,SPRN_PIR /* - * core 0 thread 0: pir reset value 0x00, new pir 0 - * core 0 thread 1: pir reset value 0x01, new pir 1 - * core 1 thread 0: pir reset value 0x08, new pir 2 - * core 1 thread 1: pir reset value 0x09, new pir 3 - * core 2 thread 0: pir reset value 0x10, new pir 4 - * core 2 thread 1: pir reset value 0x11, new pir 5 - * etc. - * - * Only thread 0 of each core will be running, updating PIR doesn't - * need to deal with the thread bits. + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB */ - rlwinm r4,r0,30,24,30 -#endif + slwi r8,r5,6 /* spin table is padded to 64 byte */ + add r10,r3,r8 mtspr SPRN_PIR,r4 /* write to PIR register */ diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 297f2ed..a4d6e9c 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -112,30 +112,32 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* * Each cluster has up to 4 cores, sharing the same PLL selection. - * The cluster assignment is fixed per SoC. There is no way identify the - * assignment so far, presuming the "first configuration" which is to - * fill the lower cluster group first before moving up to next group. - * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 - * and core 4~7 on cluster 2 - * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 - * and core 12~15 on cluster 4 if existing + * The cluster assignment is fixed per SoC. PLL1, PLL2, PLL3 are + * cluster group A, feeding cores on cluster 1 and cluster 2. + * PLL4, PLL5, PLL6 are cluster group B, feeding cores on cluster 3 + * and cluster 4 if existing. */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + int cluster = fsl_qoriq_core_to_cluster(cpu); + u32 c_pll_sel = (in_be32(&clk->clkcsr[cluster].clkcncsr) >> 27) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; if (cplx_pll > 3) printf("Unsupported architecture configuration" " in function %s\n", __func__); - cplx_pll += (cpu / 8) * 3; - + cplx_pll += (cluster / 2) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#ifdef CONFIG_PPC_B4860 +#define FM1_CLK_SEL 0xe0000000 +#define FM1_CLK_SHIFT 29 +#else #define PME_CLK_SEL 0xe0000000 #define PME_CLK_SHIFT 29 #define FM1_CLK_SEL 0x1c000000 #define FM1_CLK_SHIFT 26 +#endif rcw_tmp = in_be32(&gur->rcwsr[7]); #ifdef CONFIG_SYS_DPAA_PME @@ -185,6 +187,9 @@ void get_sys_info (sys_info_t * sysInfo) case 4: sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; break; + case 5: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + break; case 6: sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; break; @@ -232,7 +237,8 @@ void get_sys_info (sys_info_t * sysInfo) #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkcsr[cpu].clkcncsr) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; sysInfo->freqProcessor[cpu] = @@ -285,6 +291,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #else /* CONFIG_FSL_CORENET */ diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 3f76ee6..4f0480b 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -116,10 +116,10 @@ _start_e500: /* Erratum says set bits 55:60 to 001001 */ msync isync - mfspr r3,976 + mfspr r3,SPRN_HDBCR0 li r4,0x48 rlwimi r3,r4,0,0x1f8 - mtspr 976,r3 + mtspr SPRN_HDBCR0,r3 isync 2: #endif @@ -173,52 +173,6 @@ l2_disabled: mfspr r1,DBSR mtspr DBSR,r1 /* Clear all valid bits */ - /* - * Enable L1 Caches early - * - */ - -#ifdef CONFIG_SYS_CACHE_STASHING - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - li r2,(32 + 0) - mtspr L1CSR2,r2 -#endif - - /* Enable/invalidate the I-Cache */ - lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h - ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l - mtspr SPRN_L1CSR1,r2 -1: - mfspr r3,SPRN_L1CSR1 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h - ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l - mtspr SPRN_L1CSR1,r3 - isync -2: - mfspr r3,SPRN_L1CSR1 - andi. r1,r3,L1CSR1_ICE@l - beq 2b - - /* Enable/invalidate the D-Cache */ - lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h - ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l - mtspr SPRN_L1CSR0,r2 -1: - mfspr r3,SPRN_L1CSR0 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h - ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l - mtspr SPRN_L1CSR0,r3 - isync -2: - mfspr r3,SPRN_L1CSR0 - andi. r1,r3,L1CSR0_DCE@l - beq 2b .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h @@ -372,9 +326,9 @@ l2_disabled: #endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 - mfspr r3,977 + mfspr r3,SPRN_HDBCR1 oris r3,r3,0x0100 - mtspr 977,r3 + mtspr SPRN_HDBCR1,r3 #endif /* Enable Branch Prediction */ @@ -780,13 +734,60 @@ enable_l2_cluster_l2: isync and. r1, r0, r4 bne 1b - lis r4, L2CSR0_L2E@h + lis r4, (L2CSR0_L2E|L2CSR0_L2PE)@h + ori r4, r4, (L2CSR0_L2REP_MODE)@l sync - stw r4, 0(r3) /* eanble L2 */ + stw r4, 0(r3) /* enable L2 */ delete_ccsr_l2_tlb: delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif + /* + * Enable the L1. On e6500, this has to be done + * after the L2 is up. + */ + +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + li r2,(32 + 0) + mtspr L1CSR2,r2 +#endif + + /* Enable/invalidate the I-Cache */ + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 + isync +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b + + /* Enable/invalidate the D-Cache */ + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 + isync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 @@ -1905,6 +1906,7 @@ unlock_ram_in_cache: slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT) mtctr r4 1: dcbi r0,r3 + dcblc r0,r3 addi r3,r3,CONFIG_SYS_CACHELINE_SIZE bdnz 1b sync diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c new file mode 100644 index 0000000..ed61599 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c @@ -0,0 +1,135 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), + SET_QP_INFO(19, 45, 1, 1), + SET_QP_INFO(20, 46, 1, 1), + SET_QP_INFO(21, 47, 1, 2), + SET_QP_INFO(22, 48, 1, 2), + SET_QP_INFO(23, 49, 1, 3), + SET_QP_INFO(24, 50, 1, 3), + SET_QP_INFO(25, 51, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + + SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 148), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t1040_serdes.c b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c new file mode 100644 index 0000000..8261e03 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t1040_serdes.c @@ -0,0 +1,93 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +static u8 serdes_cfg_tbl[MAX_SERDES][0xC4][SRDS_MAX_LANES] = { + { /* SerDes 1 */ + [0x69] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SATA1}, + [0x66] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x67] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0x60] = {PCIE1, SGMII_FM1_DTSEC3, QSGMII_SW1_A, QSGMII_SW1_B, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x8D] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, + PCIE2, SGMII_SW1_DTSEC6, SGMII_SW1_DTSEC4, SGMII_SW1_DTSEC5}, + [0x89] = {PCIE1, SGMII_SW1_DTSEC3, SGMII_SW1_DTSEC1, SGMII_SW1_DTSEC2, + PCIE2, PCIE3, SGMII_SW1_DTSEC4, SATA1}, + [0x86] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x87] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0xA7] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, PCIE4, SGMII_FM1_DTSEC5}, + [0xAA] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, + [0x40] = {PCIE1, PCIE1, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, PCIE2, PCIE2}, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, PCIE4, SATA1}, + [0x08] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE3, SATA2, SATA1}, + [0x8F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + AURORA, NONE, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, + [0x85] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, + [0xA5] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + PCIE2, PCIE2, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5}, + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, + PCIE2, PCIE2, PCIE2, PCIE2}, + }, + { + }, + { + }, + { + }, +}; + + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + return serdes_cfg_tbl[serdes][cfg][lane]; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + + if (prtcl > (ARRAY_SIZE(serdes_cfg_tbl[serdes]))) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[serdes][prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index 102defa..c001780 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -31,7 +31,8 @@ struct serdes_config { u8 lanes[SRDS_MAX_LANES]; }; -static struct serdes_config serdes1_cfg_tbl[] = { +#ifdef CONFIG_PPC_T4240 +static const struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, @@ -66,7 +67,7 @@ static struct serdes_config serdes1_cfg_tbl[] = { NONE, NONE, QSGMII_FM1_A, NONE}}, {} }; -static struct serdes_config serdes2_cfg_tbl[] = { +static const struct serdes_config serdes2_cfg_tbl[] = { /* SerDes 2 */ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, @@ -150,7 +151,7 @@ static struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, {} }; -static struct serdes_config serdes3_cfg_tbl[] = { +static const struct serdes_config serdes3_cfg_tbl[] = { /* SerDes 3 */ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, @@ -174,20 +175,151 @@ static struct serdes_config serdes3_cfg_tbl[] = { SRIO1, SRIO1, SRIO1, SRIO1}}, {} }; -static struct serdes_config serdes4_cfg_tbl[] = { +static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, - {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, - {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} }, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} }, {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, {} }; -static struct serdes_config *serdes_cfg_tbl[] = { +#elif defined(CONFIG_PPC_T4160) +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10} }, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE} }, + {} +}; +static const struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + NONE, NONE} }, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {56, {NONE, XFI_FM1_MAC10, + XFI_FM2_MAC10, NONE, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {57, {NONE, XFI_FM1_MAC10, + XFI_FM2_MAC10, NONE, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + NONE, NONE} }, + {} +}; +static const struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + NONE, NONE, NONE, NONE} }, + {} +}; +static const struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, + {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, + {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, + {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, + {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, + {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} }, + {} +} +; +#else +#error "Need to define SerDes protocol" +#endif +static const struct serdes_config *serdes_cfg_tbl[] = { serdes1_cfg_tbl, serdes2_cfg_tbl, serdes3_cfg_tbl, @@ -196,7 +328,7 @@ static struct serdes_config *serdes_cfg_tbl[] = { enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) { - struct serdes_config *ptr; + const struct serdes_config *ptr; if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; @@ -213,7 +345,7 @@ enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) int is_serdes_prtcl_valid(int serdes, u32 prtcl) { int i; - struct serdes_config *ptr; + const struct serdes_config *ptr; if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 39525fb..bc26855 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -77,6 +77,7 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(P5040, P5040, 4), CPU_TYPE_ENTRY(T4240, T4240, 0), CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(T4160, T4160, 0), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), CPU_TYPE_ENTRY(G4060, G4060, 0), @@ -84,6 +85,12 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(G4440, G4440, 0), CPU_TYPE_ENTRY(B4420, B4420, 0), CPU_TYPE_ENTRY(B4220, B4220, 0), + CPU_TYPE_ENTRY(T1040, T1040, 0), + CPU_TYPE_ENTRY(T1041, T1041, 0), + CPU_TYPE_ENTRY(T1042, T1042, 0), + CPU_TYPE_ENTRY(T1020, T1020, 0), + CPU_TYPE_ENTRY(T1021, T1021, 0), + CPU_TYPE_ENTRY(T1022, T1022, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), @@ -96,35 +103,70 @@ static struct cpu_type cpu_type_list[] = { }; #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +static inline u32 init_type(u32 cluster, int init_id) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK; + u32 type = in_be32(&gur->tp_ityp[idx]); + + if (type & TP_ITYP_AV) + return type; + + return 0; +} + u32 compute_ppc_cpumask(void) { - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int i = 0, count = 0; - u32 cluster, mask = 0; + u32 cluster, type, mask = 0; do { int j; - cluster = in_be32(&gur->tp_cluster[i++].lower); - for (j = 0; j < 4; j++) { - u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK; - u32 type = in_be32(&gur->tp_ityp[idx]); - - if (type & TP_ITYP_AV) { + cluster = in_be32(&gur->tp_cluster[i].lower); + for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { + type = init_type(cluster, j); + if (type) { if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC) mask |= 1 << count; + count++; } - count++; } + i++; } while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC); return mask; } + +int fsl_qoriq_core_to_cluster(unsigned int core) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int i = 0, count = 0; + u32 cluster; + + do { + int j; + cluster = in_be32(&gur->tp_cluster[i].lower); + for (j = 0; j < TP_INIT_PER_CLUSTER; j++) { + if (init_type(cluster, j)) { + if (count == core) + return i; + count++; + } + } + i++; + } while ((cluster & TP_CLUSTER_EOC) != TP_CLUSTER_EOC); + + return -1; /* cannot identify the cluster */ +} + #else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ /* * Before chassis genenration 2, the cpumask should be hard-coded. * In case of cpu type unknown or cpumask unset, use 1 as fail save. */ #define compute_ppc_cpumask() 1 +#define fsl_qoriq_core_to_cluster(x) x #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0); diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 9adde31..e958e13 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -44,7 +44,6 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, printf("DDR clock (MCLK cycle %u ps) is faster than " "the slowest DIMM(s) (tCKmin %u ps) can support.\n", mclk_ps, tCKmin_X_ps); - return 1; } /* determine the acutal cas latency */ caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps; @@ -60,7 +59,6 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, if (caslat_actual * mclk_ps > 20000) { printf("The choosen cas latency %d is too large\n", caslat_actual); - return 1; } outpdimm->lowest_common_SPD_caslat = caslat_actual; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 5311a26..7a8636d 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -186,7 +186,7 @@ const char * step_to_string(unsigned int step) { return step_string_tbl[s]; } -unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, +static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, unsigned int dbw_cap_adj[]) { int i, j; @@ -354,6 +354,11 @@ unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, return total_mem; } +/* Use weak function to allow board file to override the address assignment */ +__attribute__((weak, alias("__step_assign_addresses"))) +unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]); + unsigned long long fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only) @@ -541,14 +546,17 @@ phys_size_t fsl_ddr_sdram(void) total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); /* setup 3-way interleaving before enabling DDRC */ - switch (info.memctl_opts[0].memctl_interleaving_mode) { - case FSL_DDR_3WAY_1KB_INTERLEAVING: - case FSL_DDR_3WAY_4KB_INTERLEAVING: - case FSL_DDR_3WAY_8KB_INTERLEAVING: - fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); - break; - default: - break; + if (info.memctl_opts[0].memctl_interleaving) { + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r( + info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } } /* Program configuration registers. */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7267611..1009a31 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -512,23 +512,34 @@ #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#elif defined(CONFIG_PPC_T4240) +#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) +#define CONFIG_E6500 #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#ifdef CONFIG_PPC_T4240 #define CONFIG_MAX_CPUS 12 +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_SYS_NUM_FM2_DTSEC 8 +#define CONFIG_SYS_NUM_FM2_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 +#else +#define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_NUM_FM1_DTSEC 7 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_SYS_NUM_FM2_DTSEC 7 +#define CONFIG_SYS_NUM_FM2_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 2 -#define CONFIG_SYS_NUM_FM1_DTSEC 8 -#define CONFIG_SYS_NUM_FM1_10GEC 2 -#define CONFIG_SYS_NUM_FM2_DTSEC 8 -#define CONFIG_SYS_NUM_FM2_10GEC 2 -#define CONFIG_NUM_DDR_CONTROLLERS 3 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 @@ -537,26 +548,23 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 #define CONFIG_SYS_FSL_ERRATUM_A_004934 #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_PCI_VER_3_X -#elif defined(CONFIG_PPC_B4420) +#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420) +#define CONFIG_E6500 #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ -#define CONFIG_MAX_CPUS 2 -#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 -#define CONFIG_SYS_NUM_FM1_DTSEC 4 -#define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 @@ -567,30 +575,50 @@ #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 -#elif defined(CONFIG_PPC_B4860) -#define CONFIG_SYS_PPC64 /* 64-bit core */ +#ifdef CONFIG_PPC_B4860 +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#else +#define CONFIG_MAX_CPUS 2 +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_NUM_FM1_DTSEC 4 +#define CONFIG_SYS_NUM_FM1_10GEC 0 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#endif + +#elif defined(CONFIG_PPC_T1040) +#define CONFIG_E5500 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1 #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_MAX_CPUS 4 -#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 -#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 5 +#define CONFIG_SYS_FSL_NUM_LAWS 16 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 -#define CONFIG_SYS_NUM_FM1_DTSEC 6 -#define CONFIG_SYS_NUM_FM1_10GEC 2 -#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FMAN_V3 -#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 -#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_ERRATUM_A_004934 -#define CONFIG_SYS_FSL_ERRATUM_A005871 +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #else @@ -601,4 +629,10 @@ #error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform." #endif +#ifdef CONFIG_E6500 +#define CONFIG_SYS_FSL_THREADS_PER_CORE 2 +#else +#define CONFIG_SYS_FSL_THREADS_PER_CORE 1 +#endif + #endif /* _ASM_MPC85xx_CONFIG_H_ */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index f9cec8e..90b264d 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -70,6 +70,8 @@ enum law_trgt_if { LAW_TRGT_IF_DCSR = 0x1d, LAW_TRGT_IF_LBC = 0x1f, LAW_TRGT_IF_QMAN = 0x3c, + + LAW_TRGT_IF_MAPLE = 0x50, }; #define LAW_TRGT_IF_DDR LAW_TRGT_IF_DDR_1 #define LAW_TRGT_IF_IFC LAW_TRGT_IF_LBC diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index d1c1967..2bc6ed1 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -23,16 +23,6 @@ #ifndef __FSL_SECURE_BOOT_H #define __FSL_SECURE_BOOT_H -/* Starting TLB number for the TLB entried for 3.5 G space created by ISBC */ -#if defined(CONFIG_FSL_CORENET) -#define CONFIG_SYS_ISBC_START_TLB 3 -#else -#define CONFIG_SYS_ISBC_START_TLB 0 -#endif - -/* Number fo TLB's created by ISBC */ -#define CONFIG_SYS_ISBC_NUM_TLBS 5 - #if defined(CONFIG_FSL_CORENET) #define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000 #else diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 6cd7379..ccb91fb 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -80,6 +80,14 @@ enum srds_prtcl { XFI_FM2_MAC9, XFI_FM2_MAC10, INTERLAKEN, + SGMII_SW1_DTSEC1, /* SW indicates on L2 switch */ + SGMII_SW1_DTSEC2, + SGMII_SW1_DTSEC3, + SGMII_SW1_DTSEC4, + SGMII_SW1_DTSEC5, + SGMII_SW1_DTSEC6, + QSGMII_SW1_A, /* SW indicates on L2 swtich */ + QSGMII_SW1_B, }; enum srds { diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index d5db854..c02447f 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -104,12 +104,6 @@ struct arch_global_data { u32 ips_clk; u32 csb_clk; #endif /* CONFIG_MPC512X */ -#if defined(CONFIG_MPC8220) - unsigned long inp_clk; - unsigned long vco_clk; - unsigned long pev_clk; - unsigned long flb_clk; -#endif unsigned long reset_status; /* reset status register at boot */ #if defined(CONFIG_MPC83xx) unsigned long arbiter_event_attributes; diff --git a/arch/powerpc/include/asm/immap_8220.h b/arch/powerpc/include/asm/immap_8220.h deleted file mode 100644 index f9595f4..0000000 --- a/arch/powerpc/include/asm/immap_8220.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * MPC8220 Internal Memory Map - * Copyright (c) 2004 TsiChung Liew (Tsi-Chung.Liew@freescale.com) - * - * The Internal Memory Map of the 8220. - * - */ -#ifndef __IMMAP_MPC8220__ -#define __IMMAP_MPC8220__ - -/* - * System configuration registers. - */ -typedef struct sys_conf { - u16 mbar; /* 0x00 */ - u16 res1; - - u16 res2; /* 0x04 */ - u16 sdramds; - - u32 res3[6]; /* 0x08 */ - - u32 cscfg[6]; /* 0x20 */ - - u32 res4[2]; /* 0x38 */ - - u8 res5[3]; /* 0x40 */ - u8 rstctrl; - - u8 res6[3]; /* 0x44 */ - u8 rststat; - - u32 res7[2]; /* 0x48 */ - - u32 jtagid; /* 0x50 */ -} sysconf8220_t; - - -/* - * Memory controller registers. - */ -typedef struct mem_ctlr { - ushort mode; /* 0x100 */ - ushort res1; - u32 ctrl; /* 0x104 */ - u32 cfg1; /* 0x108 */ - u32 cfg2; /* 0x10c */ -} memctl8220_t; - -/* - * XLB Arbitration registers - */ -typedef struct xlb_arb -{ - uint res1[16]; /* 0x200 */ - uint config; /* 0x240 */ - uint version; /* 0x244 */ - uint status; /* 0x248 */ - uint intEnable; /* 0x24c */ - uint addrCap; /* 0x250 */ - uint busSigCap; /* 0x254 */ - uint addrTenTimeOut; /* 0x258 */ - uint dataTenTimeOut; /* 0x25c */ - uint busActTimeOut; /* 0x260 */ - uint mastPriEn; /* 0x264 */ - uint mastPriority; /* 0x268 */ - uint baseAddr; /* 0x26c */ -} xlbarb8220_t; - -/* - * Flexbus registers - */ -typedef struct flexbus -{ - ushort csar0; /* 0x00 */ - ushort res1; - uint csmr0; /* 0x04 */ - uint cscr0; /* 0x08 */ - - ushort csar1; /* 0x0c */ - ushort res2; - uint csmr1; /* 0x10 */ - uint cscr1; /* 0x14 */ - - ushort csar2; /* 0x18 */ - ushort res3; - uint csmr2; /* 0x1c */ - uint cscr2; /* 0x20 */ - - ushort csar3; /* 0x24 */ - ushort res4; - uint csmr3; /* 0x28 */ - uint cscr3; /* 0x2c */ - - ushort csar4; /* 0x30 */ - ushort res5; - uint csmr4; /* 0x34 */ - uint cscr4; /* 0x38 */ - - ushort csar5; /* 0x3c */ - ushort res6; - uint csmr5; /* 0x40 */ - uint cscr5; /* 0x44 */ -} flexbus8220_t; - -/* - * GPIO registers - */ -typedef struct gpio -{ - u32 out; /* 0x00 */ - u32 obs; /* 0x04 */ - u32 obc; /* 0x08 */ - u32 obt; /* 0x0c */ - u32 en; /* 0x10 */ - u32 ebs; /* 0x14 */ - u32 ebc; /* 0x18 */ - u32 ebt; /* 0x1c */ - u32 mc; /* 0x20 */ - u32 st; /* 0x24 */ - u32 intr; /* 0x28 */ -} gpio8220_t; - -/* - * General Purpose Timer registers - */ -typedef struct gptimer -{ - u8 OCPW; - u8 OctIct; - u8 Control; - u8 Mode; - - u16 Prescl; /* Prescale */ - u16 Count; /* Count */ - - u16 PwmWid; /* PWM Width */ - u8 PwmOp; /* Output Polarity */ - u8 PwmLd; /* Immediate Update */ - - u16 Capture; /* Capture internal counter */ - u8 OvfPin; /* Ovf and Pin */ - u8 Int; /* Interrupts */ -} gptmr8220_t; - -/* - * PSC registers - */ -typedef struct psc -{ - u32 mr1_2; /* 0x00 Mode reg 1 & 2 */ - u32 sr_csr; /* 0x04 Status/Clock Select reg */ - u32 cr; /* 0x08 Command reg */ - u8 xmitbuf[4]; /* 0x0c Receive/Transmit Buffer */ - u32 ipcr_acr; /* 0x10 Input Port Change/Auxiliary Control reg */ - u32 isr_imr; /* 0x14 Interrupt Status/Mask reg */ - u32 ctur; /* 0x18 Counter Timer Upper reg */ - u32 ctlr; /* 0x1c Counter Timer Lower reg */ - u32 rsvd1[4]; /* 0x20 ... 0x2c */ - u32 ivr; /* 0x30 Interrupt Vector reg */ - u32 ipr; /* 0x34 Input Port reg */ - u32 opsetr; /* 0x38 Output Port Set reg */ - u32 opresetr; /* 0x3c Output Port Reset reg */ - u32 sicr; /* 0x40 PSC/IrDA control reg */ - u32 ircr1; /* 0x44 IrDA control reg 1*/ - u32 ircr2; /* 0x48 IrDA control reg 2*/ - u32 irsdr; /* 0x4c IrDA SIR Divide reg */ - u32 irmdr; /* 0x50 IrDA MIR Divide reg */ - u32 irfdr; /* 0x54 PSC IrDA FIR Divide reg */ - u32 rfnum; /* 0x58 RX-FIFO counter */ - u32 txnum; /* 0x5c TX-FIFO counter */ - u32 rfdata; /* 0x60 RX-FIFO data */ - u32 rfstat; /* 0x64 RX-FIFO status */ - u32 rfcntl; /* 0x68 RX-FIFO control */ - u32 rfalarm; /* 0x6c RX-FIFO alarm */ - u32 rfrptr; /* 0x70 RX-FIFO read pointer */ - u32 rfwptr; /* 0x74 RX-FIFO write pointer */ - u32 rflfrptr; /* 0x78 RX-FIFO last read frame pointer */ - u32 rflfwptr; /* 0x7c RX-FIFO last write frame pointer */ - - u32 tfdata; /* 0x80 TX-FIFO data */ - u32 tfstat; /* 0x84 TX-FIFO status */ - u32 tfcntl; /* 0x88 TX-FIFO control */ - u32 tfalarm; /* 0x8c TX-FIFO alarm */ - u32 tfrptr; /* 0x90 TX-FIFO read pointer */ - u32 tfwptr; /* 0x94 TX-FIFO write pointer */ - u32 tflfrptr; /* 0x98 TX-FIFO last read frame pointer */ - u32 tflfwptr; /* 0x9c TX-FIFO last write frame pointer */ -} psc8220_t; - -/* - * Interrupt Controller registers - */ -typedef struct interrupt_controller { -} intctl8220_t; - - -/* Fast controllers -*/ - -/* - * I2C registers - */ -typedef struct i2c -{ - u8 adr; /* 0x00 */ - u8 res1[3]; - u8 fdr; /* 0x04 */ - u8 res2[3]; - u8 cr; /* 0x08 */ - u8 res3[3]; - u8 sr; /* 0x0C */ - u8 res4[3]; - u8 dr; /* 0x10 */ - u8 res5[3]; - u32 reserved0; /* 0x14 */ - u32 reserved1; /* 0x18 */ - u32 reserved2; /* 0x1c */ - u8 icr; /* 0x20 */ - u8 res6[3]; -} i2c8220_t; - -/* - * Port Configuration Registers - */ -typedef struct pcfg -{ - uint pcfg0; /* 0x00 */ - uint pcfg1; /* 0x04 */ - uint pcfg2; /* 0x08 */ - uint pcfg3; /* 0x0c */ -} pcfg8220_t; - -/* ...and the whole thing wrapped up.... -*/ -typedef struct immap { - sysconf8220_t im_sysconf; /* System Configuration */ - memctl8220_t im_memctl; /* Memory Controller */ - xlbarb8220_t im_xlbarb; /* XLB Arbitration */ - psc8220_t im_psc; /* PSC controller */ - flexbus8220_t im_fb; /* FlexBus Controller */ - i2c8220_t im_i2c; /* I2C control/status */ - pcfg8220_t im_pcfg; /* Port configuration */ -} immap_t; - -#endif /* __IMMAP_MPC8220__ */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index baaa9fe..4052037 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1676,18 +1676,17 @@ typedef struct cpc_corenet { /* Global Utilities Block */ #ifdef CONFIG_FSL_CORENET typedef struct ccsr_gur { - u32 porsr1; /* POR status */ - u8 res1[28]; + u32 porsr1; /* POR status 1 */ + u32 porsr2; /* POR status 2 */ + u8 res_008[0x20-0x8]; u32 gpporcr1; /* General-purpose POR configuration */ - u8 res2[12]; - u32 gpiocr; /* GPIO control */ - u8 res3[12]; - u32 gpoutdr; /* General-purpose output data */ - u8 res4[12]; - u32 gpindr; /* General-purpose input data */ - u8 res5[12]; - u32 alt_pmuxcr; /* Alt function signal multiplex control */ - u8 res6[12]; + u32 gpporcr2; /* General-purpose POR configuration 2 */ + u32 dcfg_fusesr; /* Fuse status register */ +#define FSL_CORENET_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CORENET_DCFG_FUSESR_VID_MASK 0x1F +#define FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT 20 +#define FSL_CORENET_DCFG_FUSESR_ALTVID_MASK 0x1F + u8 res_02c[0x70-0x2c]; u32 devdisr; /* Device disable control */ u32 devdisr2; /* Device disable control 2 */ u32 devdisr3; /* Device disable control 3 */ @@ -1831,7 +1830,7 @@ typedef struct ccsr_gur { #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f -#if defined(CONFIG_PPC_T4240) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 @@ -1845,6 +1844,11 @@ typedef struct ccsr_gur { #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#elif defined(CONFIG_PPC_T1040) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 #endif #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 #define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 @@ -1899,7 +1903,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 #endif -#if defined(CONFIG_PPC_T4240) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ #define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 #define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 @@ -1992,6 +1996,7 @@ typedef struct ccsr_gur { #define TP_CLUSTER_EOC 0x80000000 /* end of clusters */ #define TP_CLUSTER_INIT_MASK 0x0000003f /* initiator mask */ +#define TP_INIT_PER_CLUSTER 4 #define FSL_CORENET_DCSR_SZ_MASK 0x00000003 #define FSL_CORENET_DCSR_SZ_4M 0x0 @@ -2004,22 +2009,13 @@ typedef struct ccsr_gur { #define rmuliodnr rio1maintliodnr typedef struct ccsr_clk { - u32 clkc0csr; /* 0x000 Core 0 Clock control/status */ - u8 res1[0x1c]; - u32 clkc1csr; /* 0x020 Core 1 Clock control/status */ - u8 res2[0x1c]; - u32 clkc2csr; /* 0x040 Core 2 Clock control/status */ - u8 res3[0x1c]; - u32 clkc3csr; /* 0x060 Core 3 Clock control/status */ - u8 res4[0x1c]; - u32 clkc4csr; /* 0x080 Core 4 Clock control/status */ - u8 res5[0x1c]; - u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */ - u8 res6[0x1c]; - u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */ - u8 res7[0x1c]; - u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */ - u8 res8[0x71c]; + struct { + u32 clkcncsr; /* core cluster n clock control status */ + u8 res_004[0x0c]; + u32 clkcgnhwacsr;/* clock generator n hardware accelerator */ + u8 res_014[0x0c]; + } clkcsr[8]; + u8 res_100[0x700]; /* 0x100 */ u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */ u8 res10[0x1c]; u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */ @@ -2829,12 +2825,53 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; +#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +struct ccsr_usb_port_ctrl { + u32 ctrl; + u32 drvvbuscfg; + u32 pwrfltcfg; + u32 sts; + u8 res_14[0xc]; + u32 bistcfg; + u32 biststs; + u32 abistcfg; + u32 abiststs; + u8 res_30[0x10]; + u32 xcvrprg; + u32 anaprg; + u32 anadrv; + u32 anasts; +}; + +typedef struct ccsr_usb_phy { + u32 id; + struct ccsr_usb_port_ctrl port1; + u8 res_50[0xc]; + u32 tvr; + u32 pllprg[4]; + u8 res_70[0x4]; + u32 anaccfg; + u32 dbg; + u8 res_7c[0x4]; + struct ccsr_usb_port_ctrl port2; + u8 res_dc[0x334]; +} ccsr_usb_phy_t; + +#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) +#else typedef struct ccsr_usb_phy { u8 res0[0x18]; u32 usb_enable_override; u8 res[0xe4]; } ccsr_usb_phy_t; #define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 +#endif #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 8c91f08..56b22d8 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -507,6 +507,15 @@ #define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ #define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ #define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ + +/* e6500 */ +#define L2CSR0_L2REP_SPLRUAGE 0x00000000 /* L2REP Streaming PLRU with Aging */ +#define L2CSR0_L2REP_FIFO 0x00001000 /* L2REP FIFO */ +#define L2CSR0_L2REP_SPLRU 0x00002000 /* L2REP Streaming PLRU */ +#define L2CSR0_L2REP_PLRU 0x00003000 /* L2REP PLRU */ + +#define L2CSR0_L2REP_MODE L2CSR0_L2REP_SPLRUAGE + #define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ #define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ #define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ @@ -575,6 +584,16 @@ #define SPRN_MSSSR0 0x3f7 #endif +#define SPRN_HDBCR0 0x3d0 +#define SPRN_HDBCR1 0x3d1 +#define SPRN_HDBCR2 0x3d2 +#define SPRN_HDBCR3 0x3d3 +#define SPRN_HDBCR4 0x3d4 +#define SPRN_HDBCR5 0x3d5 +#define SPRN_HDBCR6 0x3d6 +#define SPRN_HDBCR7 0x277 +#define SPRN_HDBCR8 0x278 + /* Short-hand versions for a number of the above SPRNs */ #define CTR SPRN_CTR /* Counter Register */ @@ -1099,6 +1118,7 @@ #define SVR_P5040 0x820400 #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 +#define SVR_T4160 0x824100 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 @@ -1106,6 +1126,12 @@ #define SVR_G4440 0x868101 #define SVR_B4420 0x868102 #define SVR_B4220 0x868103 +#define SVR_T1040 0x852000 +#define SVR_T1041 0x852001 +#define SVR_T1042 0x852002 +#define SVR_T1020 0x852100 +#define SVR_T1021 0x852101 +#define SVR_T1022 0x852102 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 @@ -1174,6 +1200,8 @@ struct cpu_type { struct cpu_type *identify_cpu(u32 ver); int fixup_cpu(void); +int fsl_qoriq_core_to_cluster(unsigned int core); + #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #define CPU_TYPE_ENTRY(n, v, nc) \ { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc), \ diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index cf972d2..93496a0 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -59,14 +59,6 @@ typedef struct bd_info { #if defined(CONFIG_MPC83xx) unsigned long bi_immrbar; #endif -#if defined(CONFIG_MPC8220) - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_inpfreq; /* Input Freq, In MHz */ - unsigned long bi_pcifreq; /* PCI Freq, in MHz */ - unsigned long bi_pevfreq; /* PEV Freq, in MHz */ - unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ - unsigned long bi_vcofreq; /* VCO Freq, in MHz */ -#endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 41b2294..fc4c1d5 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -301,9 +301,6 @@ static init_fnc_t *init_sequence[] = { #if defined(CONFIG_MPC5xxx) prt_mpc5xxx_clks, #endif /* CONFIG_MPC5xxx */ -#if defined(CONFIG_MPC8220) - prt_mpc8220_clks, -#endif checkboard, INIT_FUNC_WATCHDOG_INIT #if defined(CONFIG_MISC_INIT_F) @@ -548,27 +545,6 @@ void board_init_f(ulong bootflag) #if defined(CONFIG_MPC83xx) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif -#if defined(CONFIG_MPC8220) - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ - bd->bi_inpfreq = gd->arch.inp_clk; - bd->bi_pcifreq = gd->pci_clk; - bd->bi_vcofreq = gd->arch.vco_clk; - bd->bi_pevfreq = gd->arch.pev_clk; - bd->bi_flbfreq = gd->arch.flb_clk; - - /* store bootparam to sram (backward compatible), here? */ - { - u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE; - - *sram++ = gd->ram_size; - *sram++ = gd->bus_clk; - *sram++ = gd->arch.inp_clk; - *sram++ = gd->cpu_clk; - *sram++ = gd->arch.vco_clk; - *sram++ = gd->arch.flb_clk; - *sram++ = 0xb8c3ba11; /* boot signature */ - } -#endif WATCHDOG_RESET(); bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 0119a7b..dd6c98c 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -220,101 +220,19 @@ static int boot_bd_t_linux(bootm_headers_t *images) return ret; } -/* - * Verify the device tree. - * - * This function is called after all device tree fix-ups have been enacted, - * so that the final device tree can be verified. The definition of "verified" - * is up to the specific implementation. However, it generally means that the - * addresses of some of the devices in the device tree are compared with the - * actual addresses at which U-Boot has placed them. - * - * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the - * boot process. - */ -static int __ft_verify_fdt(void *fdt) -{ - return 1; -} -__attribute__((weak, alias("__ft_verify_fdt"))) int ft_verify_fdt(void *fdt); - static int boot_body_linux(bootm_headers_t *images) { - ulong rd_len; - struct lmb *lmb = &images->lmb; - ulong *initrd_start = &images->initrd_start; - ulong *initrd_end = &images->initrd_end; -#if defined(CONFIG_OF_LIBFDT) - ulong of_size = images->ft_len; - char **of_flat_tree = &images->ft_addr; -#endif - int ret; -#if defined(CONFIG_OF_LIBFDT) - boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); -#endif - - /* allocate space and init command line */ - ret = boot_cmdline_linux(images); - if (ret) - return ret; - /* allocate space for kernel copy of board info */ ret = boot_bd_t_linux(images); if (ret) return ret; - rd_len = images->rd_end - images->rd_start; - ret = boot_ramdisk_high (lmb, images->rd_start, rd_len, initrd_start, initrd_end); + ret = image_setup_linux(images); if (ret) return ret; -#if defined(CONFIG_OF_LIBFDT) - ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); - if (ret) - return ret; - - /* - * Add the chosen node if it doesn't exist, add the env and bd_t - * if the user wants it (the logic is in the subroutines). - */ - if (of_size) { - if (fdt_chosen(*of_flat_tree, 1) < 0) { - puts ("ERROR: "); - puts ("/chosen node create failed"); - puts (" - must RESET the board to recover.\n"); - return -1; - } -#ifdef CONFIG_OF_BOARD_SETUP - /* Call the board-specific fixup routine */ - ft_board_setup(*of_flat_tree, gd->bd); -#endif - - /* Delete the old LMB reservation */ - lmb_free(lmb, (phys_addr_t)(u32)*of_flat_tree, - (phys_size_t)fdt_totalsize(*of_flat_tree)); - - ret = fdt_resize(*of_flat_tree); - if (ret < 0) - return ret; - of_size = ret; - - if (*initrd_start && *initrd_end) { - of_size += FDT_RAMDISK_OVERHEAD; - fdt_set_totalsize(*of_flat_tree, of_size); - } - /* Create a new LMB reservation */ - lmb_reserve(lmb, (ulong)*of_flat_tree, of_size); - - /* fixup the initrd now that we know where it should be */ - if (*initrd_start && *initrd_end) - fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1); - - if (!ft_verify_fdt(*of_flat_tree)) - return -1; - } -#endif /* CONFIG_OF_LIBFDT */ return 0; } @@ -368,13 +286,6 @@ static void set_clocks_in_mhz (bd_t *kbd) /* convert all clock information to MHz */ kbd->bi_intfreq /= 1000000L; kbd->bi_busfreq /= 1000000L; -#if defined(CONFIG_MPC8220) - kbd->bi_inpfreq /= 1000000L; - kbd->bi_pcifreq /= 1000000L; - kbd->bi_pevfreq /= 1000000L; - kbd->bi_flbfreq /= 1000000L; - kbd->bi_vcofreq /= 1000000L; -#endif #if defined(CONFIG_CPM2) kbd->bi_cpmfreq /= 1000000L; kbd->bi_brgfreq /= 1000000L; diff --git a/arch/sparc/lib/bootm.c b/arch/sparc/lib/bootm.c index bcc6358..1a9343c 100644 --- a/arch/sparc/lib/bootm.c +++ b/arch/sparc/lib/bootm.c @@ -95,10 +95,8 @@ void arch_lmb_reserve(struct lmb *lmb) int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images) { char *bootargs; - ulong initrd_start, initrd_end; ulong rd_len; void (*kernel) (struct linux_romvec *, void *); - struct lmb *lmb = &images->lmb; int ret; if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) @@ -131,24 +129,23 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * im * extracted and is writeable. */ + ret = image_setup_linux(images); + if (ret) { + puts("### Failed to relocate RAM disk\n"); + goto error; + } + /* Calc length of RAM disk, if zero no ramdisk available */ rd_len = images->rd_end - images->rd_start; if (rd_len) { - ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, - &initrd_start, &initrd_end); - if (ret) { - puts("### Failed to relocate RAM disk\n"); - goto error; - } - /* Update SPARC kernel header so that Linux knows * what is going on and where to find RAM disk. * * Set INITRD Image address relative to RAM Start */ linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = - initrd_start - CONFIG_SYS_RAM_BASE; + images->initrd_start - CONFIG_SYS_RAM_BASE; linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len; /* Clear READ ONLY flag if set to non-zero */ linux_hdr->hdr_input.ver_0203.root_flags = 1; diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index 7b520f8..cddf0dd 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)lib$(CPU).o START-y = start.o START-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o -COBJS = interrupts.o cpu.o timer.o +COBJS = interrupts.o cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index f8e28f0..14cb699 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -26,6 +26,7 @@ #include <asm/u-boot-x86.h> #include <flash.h> #include <netdev.h> +#include <ns16550.h> #include <asm/msr.h> #include <asm/cache.h> #include <asm/io.h> @@ -90,6 +91,9 @@ void show_boot_progress(int val) int last_stage_init(void) { + if (gd->flags & GD_FLG_COLD_BOOT) + timestamp_add_to_bootstage(); + return 0; } @@ -135,3 +139,12 @@ int board_final_cleanup(void) return 0; } + +void panic_puts(const char *str) +{ + NS16550_t port = (NS16550_t)0x3f8; + + NS16550_init(port, 1); + while (*str) + NS16550_putc(port, *str++); +} diff --git a/arch/x86/cpu/coreboot/timestamp.c b/arch/x86/cpu/coreboot/timestamp.c index 2ca7a57..bd3558a 100644 --- a/arch/x86/cpu/coreboot/timestamp.c +++ b/arch/x86/cpu/coreboot/timestamp.c @@ -39,7 +39,9 @@ static struct timestamp_table *ts_table __attribute__((section(".data"))); void timestamp_init(void) { ts_table = lib_sysinfo.tstamp_table; - timer_set_tsc_base(ts_table->base_time); +#ifdef CONFIG_SYS_X86_TSC_TIMER + timer_set_base(ts_table->base_time); +#endif timestamp_add_now(TS_U_BOOT_INITTED); } @@ -59,3 +61,41 @@ void timestamp_add_now(enum timestamp_id id) { timestamp_add(id, rdtsc()); } + +int timestamp_add_to_bootstage(void) +{ + uint i; + + if (!ts_table) + return -1; + + for (i = 0; i < ts_table->num_entries; i++) { + struct timestamp_entry *tse = &ts_table->entries[i]; + const char *name = NULL; + + switch (tse->entry_id) { + case TS_START_ROMSTAGE: + name = "start-romstage"; + break; + case TS_BEFORE_INITRAM: + name = "before-initram"; + break; + case TS_DEVICE_INITIALIZE: + name = "device-initialize"; + break; + case TS_DEVICE_DONE: + name = "device-done"; + break; + case TS_SELFBOOT_JUMP: + name = "selfboot-jump"; + break; + } + if (name) { + bootstage_add_record(0, name, BOOTSTAGEF_ALLOC, + tse->entry_stamp / + get_tbclk_mhz()); + } + } + + return 0; +} diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 1a2f85c..7a914a5 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -120,6 +120,11 @@ void setup_gdt(gd_t *id, u64 *gdt_addr) int __weak x86_cleanup_before_linux(void) { +#ifdef CONFIG_BOOTSTAGE_STASH + bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH, + CONFIG_BOOTSTAGE_STASH_SIZE); +#endif + return 0; } diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index 6dc74e3..e733bcb 100644 --- a/arch/x86/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -37,6 +37,8 @@ #include <asm/msr.h> #include <asm/u-boot-x86.h> +DECLARE_GLOBAL_DATA_PTR; + #define DECLARE_INTERRUPT(x) \ ".globl irq_"#x"\n" \ ".hidden irq_"#x"\n" \ diff --git a/arch/x86/cpu/timer.c b/arch/x86/cpu/timer.c deleted file mode 100644 index 149109d..0000000 --- a/arch/x86/cpu/timer.c +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. - * Use of this source code is governed by a BSD-style license that can be - * found in the LICENSE file. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - */ - -#include <common.h> - -unsigned long timer_get_us(void) -{ - printf("timer_get_us used but not implemented.\n"); - return 0; -} diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index 2d6911a..b4ecd4b 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -79,18 +79,6 @@ SECTIONS /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } - /* 16bit realmode trampoline code */ - .realmode REALMODE_BASE : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) } - - __realmode_start = LOADADDR(.realmode); - __realmode_size = SIZEOF(.realmode); - - /* 16bit BIOS emulation code (just enough to boot Linux) */ - .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { KEEP(*(.bios)) } - - __bios_start = LOADADDR(.bios); - __bios_size = SIZEOF(.bios); - #ifdef CONFIG_X86_RESET_VECTOR /* diff --git a/arch/x86/include/asm/arch-coreboot/timestamp.h b/arch/x86/include/asm/arch-coreboot/timestamp.h index d104912..fcfc1d5 100644 --- a/arch/x86/include/asm/arch-coreboot/timestamp.h +++ b/arch/x86/include/asm/arch-coreboot/timestamp.h @@ -49,4 +49,11 @@ void timestamp_init(void); void timestamp_add(enum timestamp_id id, uint64_t ts_time); void timestamp_add_now(enum timestamp_id id); +/** + * timestamp_add_to_bootstage - Add important coreboot timestamps to bootstage + * + * @return 0 if ok, -1 if no timestamps were found + */ +int timestamp_add_to_bootstage(void); + #endif diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h index d018b29..0a6a675 100644 --- a/arch/x86/include/asm/init_helpers.h +++ b/arch/x86/include/asm/init_helpers.h @@ -24,19 +24,10 @@ #ifndef _INIT_HELPERS_H_ #define _INIT_HELPERS_H_ -int display_banner(void); -int display_dram_config(void); -int init_baudrate_f(void); int calculate_relocation_address(void); int init_cache_f_r(void); - -int set_reloc_flag_r(void); -int mem_malloc_init_r(void); int init_bd_struct_r(void); -int flash_init_r(void); -int status_led_set_r(void); -int set_load_addr_r(void); int init_func_spi(void); int find_fdt(void); int prepare_fdt(void); diff --git a/arch/x86/include/asm/init_wrappers.h b/arch/x86/include/asm/init_wrappers.h deleted file mode 100644 index 899ffb1..0000000 --- a/arch/x86/include/asm/init_wrappers.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * (C) Copyright 2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _INIT_WRAPPERS_H_ -#define _INIT_WRAPPERS_H_ - -int serial_initialize_r(void); -int env_relocate_r(void); -int pci_init_r(void); -int jumptable_init_r(void); -int pcmcia_init_r(void); -int kgdb_init_r(void); -int enable_interrupts_r(void); -int eth_initialize_r(void); -int reset_phy_r(void); -int ide_init_r(void); -int scsi_init_r(void); -int doc_init_r(void); -int bb_miiphy_init_r(void); -int post_run_r(void); - -#endif /* !_INIT_WRAPPERS_H_ */ diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index 6d68ab6..9cc2034 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -30,8 +30,4 @@ const struct pci_device_id _table[] void pci_setup_type1(struct pci_controller *hose); -int pci_enable_legacy_video_ports(struct pci_controller* hose); -int pci_shadow_rom(pci_dev_t dev, unsigned char *dest); -void pci_remove_rom_window(struct pci_controller* hose, u32 addr); -u32 pci_get_rom_window(struct pci_controller* hose, int size); #endif diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index ae0c388..22e0934 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -33,11 +33,15 @@ void init_gd(gd_t *id, u64 *gdt_addr); void setup_gdt(gd_t *id, u64 *gdt_addr); int init_cache(void); int cleanup_before_linux(void); +void panic_puts(const char *str); /* cpu/.../timer.c */ void timer_isr(void *); typedef void (timer_fnc_t) (void); int register_timer_isr (timer_fnc_t *isr_func); +unsigned long get_tbclk_mhz(void); +void timer_set_base(uint64_t base); +int pcat_timer_init(void); /* Architecture specific - can be in arch/x86/cpu/, arch/x86/lib/, or $(BOARD)/ */ int dram_init_f(void); diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h index df759fa..006232b 100644 --- a/arch/x86/include/asm/u-boot.h +++ b/arch/x86/include/asm/u-boot.h @@ -36,40 +36,8 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 -#include <config.h> -#include <compiler.h> - -#ifdef CONFIG_SYS_GENERIC_BOARD /* Use the generic board which requires a unified bd_info */ #include <asm-generic/u-boot.h> -#else - -#ifndef __ASSEMBLY__ - -typedef struct bd_info { - unsigned long bi_memstart; /* start of DRAM memory */ - phys_size_t bi_memsize; /* size of DRAM memory in bytes */ - unsigned long bi_flashstart; /* start of FLASH memory */ - unsigned long bi_flashsize; /* size of FLASH memory */ - unsigned long bi_flashoffset; /* reserved area for startup monitor */ - unsigned long bi_sramstart; /* start of SRAM memory */ - unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ - unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ - unsigned long bi_intfreq; /* Internal Freq, in MHz */ - unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned int bi_baudrate; /* Console Baudrate */ - unsigned long bi_boot_params; /* where this board expects params */ - struct /* RAM configuration */ - { - ulong start; - ulong size; - }bi_dram[CONFIG_NR_DRAM_BANKS]; -} bd_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* !CONFIG_SYS_GENERIC_BOARD */ /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_I386 diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index ee89354..f66ad30 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -25,24 +25,18 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o -ifeq ($(CONFIG_SYS_GENERIC_BOARD),) -COBJS-y += board.o -endif - COBJS-y += bootm.o COBJS-y += cmd_boot.o COBJS-y += gcc.o COBJS-y += init_helpers.o -COBJS-y += init_wrappers.o COBJS-y += interrupts.o COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o -COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o -COBJS-$(CONFIG_PCI) += pci.o +COBJS-$(CONFIG_SYS_PCAT_TIMER) += pcat_timer.o COBJS-$(CONFIG_PCI) += pci_type1.o COBJS-y += relocate.o COBJS-y += physmem.o COBJS-y += string.o -COBJS-$(CONFIG_SYS_X86_ISR_TIMER) += timer.o +COBJS-$(CONFIG_SYS_X86_TSC_TIMER) += tsc_timer.o COBJS-$(CONFIG_VIDEO_VGA) += video.o COBJS-$(CONFIG_CMD_ZBOOT) += zimage.o diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h deleted file mode 100644 index 96509b0..0000000 --- a/arch/x86/lib/bios.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _BIOS_H_ -#define _BIOS_H_ - -#define OFFS_ES 0 /* 16bit */ -#define OFFS_GS 2 /* 16bit */ -#define OFFS_DS 4 /* 16bit */ -#define OFFS_EDI 6 /* 32bit */ -#define OFFS_DI 6 /* low 16 bits of EDI */ -#define OFFS_ESI 10 /* 32bit */ -#define OFFS_SI 10 /* low 16 bits of ESI */ -#define OFFS_EBP 14 /* 32bit */ -#define OFFS_BP 14 /* low 16 bits of EBP */ -#define OFFS_ESP 18 /* 32bit */ -#define OFFS_SP 18 /* low 16 bits of ESP */ -#define OFFS_EBX 22 /* 32bit */ -#define OFFS_BX 22 /* low 16 bits of EBX */ -#define OFFS_BL 22 /* low 8 bits of BX */ -#define OFFS_BH 23 /* high 8 bits of BX */ -#define OFFS_EDX 26 /* 32bit */ -#define OFFS_DX 26 /* low 16 bits of EBX */ -#define OFFS_DL 26 /* low 8 bits of BX */ -#define OFFS_DH 27 /* high 8 bits of BX */ -#define OFFS_ECX 30 /* 32bit */ -#define OFFS_CX 30 /* low 16 bits of EBX */ -#define OFFS_CL 30 /* low 8 bits of BX */ -#define OFFS_CH 31 /* high 8 bits of BX */ -#define OFFS_EAX 34 /* 32bit */ -#define OFFS_AX 34 /* low 16 bits of EBX */ -#define OFFS_AL 34 /* low 8 bits of BX */ -#define OFFS_AH 35 /* high 8 bits of BX */ -#define OFFS_VECTOR 38 /* 16bit */ -#define OFFS_IP 40 /* 16bit */ -#define OFFS_CS 42 /* 16bit */ -#define OFFS_FLAGS 44 /* 16bit */ - -/* stack at 0x40:0x800 -> 0x800 */ -#define SEGMENT 0x40 -#define STACK 0x800 - -/* - * save general registers - * save some segments - * save callers stack segment - * setup BIOS segments - * setup BIOS stackpointer - */ -#define MAKE_BIOS_STACK \ - pushal; \ - pushw %ds; \ - pushw %gs; \ - pushw %es; \ - pushw %ss; \ - popw %gs; \ - movw $SEGMENT, %ax; \ - movw %ax, %ds; \ - movw %ax, %es; \ - movw %ax, %ss; \ - movw %sp, %bp; \ - movw $STACK, %sp - -/* - * restore callers stack segment - * restore some segments - * restore general registers - */ -#define RESTORE_CALLERS_STACK \ - pushw %gs; \ - popw %ss; \ - movw %bp, %sp; \ - popw %es; \ - popw %gs; \ - popw %ds; \ - popal - -#ifndef __ASSEMBLY__ -#define BIOS_DATA ((char *)0x400) -#define BIOS_DATA_SIZE 256 -#define BIOS_BASE ((char *)0xf0000) -#define BIOS_CS 0xf000 - -extern ulong __bios_start; -extern ulong __bios_size; - -/* these are defined in a 16bit segment and needs - * to be accessed with the RELOC_16_xxxx() macros below - */ -extern u16 ram_in_64kb_chunks; -extern u16 bios_equipment; -extern u8 pci_last_bus; - -extern void *rm_int00; -extern void *rm_int01; -extern void *rm_int02; -extern void *rm_int03; -extern void *rm_int04; -extern void *rm_int05; -extern void *rm_int06; -extern void *rm_int07; -extern void *rm_int08; -extern void *rm_int09; -extern void *rm_int0a; -extern void *rm_int0b; -extern void *rm_int0c; -extern void *rm_int0d; -extern void *rm_int0e; -extern void *rm_int0f; -extern void *rm_int10; -extern void *rm_int11; -extern void *rm_int12; -extern void *rm_int13; -extern void *rm_int14; -extern void *rm_int15; -extern void *rm_int16; -extern void *rm_int17; -extern void *rm_int18; -extern void *rm_int19; -extern void *rm_int1a; -extern void *rm_int1b; -extern void *rm_int1c; -extern void *rm_int1d; -extern void *rm_int1e; -extern void *rm_int1f; -extern void *rm_def_int; - -#define RELOC_16_LONG(seg, off) (*(u32 *)(seg << 4 | (u32)&off)) -#define RELOC_16_WORD(seg, off) (*(u16 *)(seg << 4 | (u32)&off)) -#define RELOC_16_BYTE(seg, off) (*(u8 *)(seg << 4 | (u32)&off)) - -#ifdef PCI_BIOS_DEBUG -extern u32 num_pci_bios_present; -extern u32 num_pci_bios_find_device; -extern u32 num_pci_bios_find_class; -extern u32 num_pci_bios_generate_special_cycle; -extern u32 num_pci_bios_read_cfg_byte; -extern u32 num_pci_bios_read_cfg_word; -extern u32 num_pci_bios_read_cfg_dword; -extern u32 num_pci_bios_write_cfg_byte; -extern u32 num_pci_bios_write_cfg_word; -extern u32 num_pci_bios_write_cfg_dword; -extern u32 num_pci_bios_get_irq_routing; -extern u32 num_pci_bios_set_irq; -extern u32 num_pci_bios_unknown_function; -#endif - -#endif - -#endif diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c deleted file mode 100644 index 228c2c8..0000000 --- a/arch/x86/lib/board.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * (C) Copyright 2008-2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <fdtdec.h> -#include <watchdog.h> -#include <stdio_dev.h> -#include <asm/u-boot-x86.h> -#include <asm/relocate.h> -#include <asm/processor.h> -#include <asm/sections.h> - -#include <asm/init_helpers.h> -#include <asm/init_wrappers.h> - -/* - * Breath some life into the board... - * - * Getting the board up and running is a three-stage process: - * 1) Execute from Flash, SDRAM Uninitialised - * At this point, there is a limited amount of non-SDRAM memory - * (typically the CPU cache, but can also be SRAM or even a buffer of - * of some peripheral). This limited memory is used to hold: - * - The initial copy of the Global Data Structure - * - A temporary stack - * - A temporary x86 Global Descriptor Table - * - The pre-console buffer (if enabled) - * - * The following is performed during this phase of execution: - * - Core low-level CPU initialisation - * - Console initialisation - * - SDRAM initialisation - * - * 2) Execute from Flash, SDRAM Initialised - * At this point we copy Global Data from the initial non-SDRAM - * memory and set up the permanent stack in SDRAM. The CPU cache is no - * longer being used as temporary memory, so we can now fully enable - * it. - * - * The following is performed during this phase of execution: - * - Create final stack in SDRAM - * - Copy Global Data from temporary memory to SDRAM - * - Enabling of CPU cache(s), - * - Copying of U-Boot code and data from Flash to RAM - * - Clearing of the BSS - * - ELF relocation adjustments - * - * 3) Execute from SDRAM - * The following is performed during this phase of execution: - * - All remaining initialisation - */ - -/* - * The requirements for any new initalization function is simple: it is - * a function with no parameters which returns an integer return code, - * where 0 means "continue" and != 0 means "fatal error, hang the system" - */ -typedef int (init_fnc_t) (void); - -/* - * init_sequence_f is the list of init functions which are run when U-Boot - * is executing from Flash with a limited 'C' environment. The following - * limitations must be considered when implementing an '_f' function: - * - 'static' variables are read-only - * - Global Data (gd->xxx) is read/write - * - Stack space is limited - * - * The '_f' sequence must, as a minimum, initialise SDRAM. It _should_ - * also initialise the console (to provide early debug output) - */ -init_fnc_t *init_sequence_f[] = { - cpu_init_f, - board_early_init_f, -#ifdef CONFIG_OF_CONTROL - find_fdt, - fdtdec_check_fdt, -#endif - env_init, - init_baudrate_f, - serial_init, - console_init_f, -#ifdef CONFIG_OF_CONTROL - prepare_fdt, -#endif - dram_init_f, - calculate_relocation_address, - - NULL, -}; - -/* - * init_sequence_f_r is the list of init functions which are run when - * U-Boot is executing from Flash with a semi-limited 'C' environment. - * The following limitations must be considered when implementing an - * '_f_r' function: - * - 'static' variables are read-only - * - Global Data (gd->xxx) is read/write - * - * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if - * supported). It _should_, if possible, copy global data to RAM and - * initialise the CPU caches (to speed up the relocation process) - */ -init_fnc_t *init_sequence_f_r[] = { - init_cache_f_r, - copy_uboot_to_ram, - copy_fdt_to_ram, - clear_bss, - do_elf_reloc_fixups, - - NULL, -}; - -/* - * init_sequence_r is the list of init functions which are run when U-Boot - * is executing from RAM with a full 'C' environment. There are no longer - * any limitations which must be considered when implementing an '_r' - * function, (i.e.'static' variables are read/write) - * - * If not already done, the '_r' sequence must copy global data to RAM and - * (should) initialise the CPU caches. - */ -init_fnc_t *init_sequence_r[] = { - set_reloc_flag_r, - init_bd_struct_r, - mem_malloc_init_r, - cpu_init_r, - board_early_init_r, - dram_init, - interrupt_init, - timer_init, - display_banner, - display_dram_config, - serial_initialize_r, -#ifndef CONFIG_SYS_NO_FLASH - flash_init_r, -#endif -#ifdef CONFIG_PCI - pci_init_r, -#endif -#ifdef CONFIG_SPI - init_func_spi, -#endif - env_relocate_r, - stdio_init, - jumptable_init_r, - console_init_r, -#ifdef CONFIG_MISC_INIT_R - misc_init_r, -#endif -#if defined(CONFIG_CMD_KGDB) - kgdb_init_r, -#endif - enable_interrupts_r, -#ifdef CONFIG_STATUS_LED - status_led_set_r, -#endif - set_load_addr_r, -#if defined(CONFIG_CMD_IDE) - ide_init_r, -#endif -#if defined(CONFIG_CMD_SCSI) - scsi_init_r, -#endif -#if defined(CONFIG_CMD_DOC) - doc_init_r, -#endif -#ifdef CONFIG_BITBANGMII - bb_miiphy_init_r, -#endif -#if defined(CONFIG_CMD_NET) - eth_initialize_r, -#ifdef CONFIG_RESET_PHY_R - reset_phy_r, -#endif -#endif -#ifdef CONFIG_LAST_STAGE_INIT - last_stage_init, -#endif - NULL, -}; - -static void do_init_loop(init_fnc_t **init_fnc_ptr) -{ - for (; *init_fnc_ptr; ++init_fnc_ptr) { - WATCHDOG_RESET(); - if ((*init_fnc_ptr)() != 0) - hang(); - } -} - -void board_init_f(ulong boot_flags) -{ - gd->fdt_blob = gd->new_fdt = NULL; - gd->flags = boot_flags; - - do_init_loop(init_sequence_f); - - /* - * SDRAM and console are now initialised. The final stack can now - * be setup in SDRAM. Code execution will continue in Flash, but - * with the stack in SDRAM and Global Data in temporary memory - * (CPU cache) - */ - board_init_f_r_trampoline(gd->start_addr_sp); - - /* NOTREACHED - board_init_f_r_trampoline() does not return */ - while (1) - ; -} - -void board_init_f_r(void) -{ - do_init_loop(init_sequence_f_r); - - /* - * U-Boot has been copied into SDRAM, the BSS has been cleared etc. - * Transfer execution from Flash to RAM by calculating the address - * of the in-RAM copy of board_init_r() and calling it - */ - (board_init_r + gd->reloc_off)(gd, gd->relocaddr); - - /* NOTREACHED - board_init_r() does not return */ - while (1) - ; -} - -void board_init_r(gd_t *id, ulong dest_addr) -{ - do_init_loop(init_sequence_r); - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) - main_loop(); - - /* NOTREACHED - no way out of command loop except booting */ -} diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c index 83caf6b..2520228 100644 --- a/arch/x86/lib/bootm.c +++ b/arch/x86/lib/bootm.c @@ -93,14 +93,6 @@ int do_bootm_linux(int flag, int argc, char * const argv[], goto error; } -#ifdef DEBUG - printf("## Transferring control to Linux (at address %08x) ...\n", - (u32)base_ptr); -#endif - - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - boot_zimage(base_ptr, load_address); /* does not return */ diff --git a/arch/x86/lib/cmd_boot.c b/arch/x86/lib/cmd_boot.c index a81a9a3..315be5a 100644 --- a/arch/x86/lib/cmd_boot.c +++ b/arch/x86/lib/cmd_boot.c @@ -36,6 +36,8 @@ #include <malloc.h> #include <asm/u-boot-x86.h> +DECLARE_GLOBAL_DATA_PTR; + unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, char * const argv[]) { diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c index af9dbc1..a57a0eb 100644 --- a/arch/x86/lib/init_helpers.c +++ b/arch/x86/lib/init_helpers.c @@ -21,60 +21,12 @@ * MA 02111-1307 USA */ #include <common.h> -#include <command.h> #include <fdtdec.h> -#include <stdio_dev.h> -#include <version.h> -#include <malloc.h> -#include <net.h> -#include <ide.h> -#include <serial.h> #include <spi.h> -#include <status_led.h> -#include <asm/processor.h> #include <asm/sections.h> -#include <asm/u-boot-x86.h> -#include <linux/compiler.h> - -#include <asm/init_helpers.h> DECLARE_GLOBAL_DATA_PTR; -/************************************************************************ - * Init Utilities * - ************************************************************************ - * Some of this code should be moved into the core functions, - * or dropped completely, - * but let's get it working (again) first... - */ - -int display_banner(void) -{ - printf("\n\n%s\n\n", version_string); - - return 0; -} - -int display_dram_config(void) -{ - int i; - - puts("DRAM Configuration:\n"); - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - printf("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start); - print_size(gd->bd->bi_dram[i].size, "\n"); - } - - return 0; -} - -int init_baudrate_f(void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - /* Get the top of usable RAM */ __weak ulong board_get_usable_ram_top(ulong total_size) { @@ -134,21 +86,6 @@ int init_cache_f_r(void) return init_cache(); } -int set_reloc_flag_r(void) -{ - gd->flags = GD_FLG_RELOC; - - return 0; -} - -int mem_malloc_init_r(void) -{ - mem_malloc_init(((gd->relocaddr - CONFIG_SYS_MALLOC_LEN)+3)&~3, - CONFIG_SYS_MALLOC_LEN); - - return 0; -} - bd_t bd_data; int init_bd_struct_r(void) @@ -159,39 +96,6 @@ int init_bd_struct_r(void) return 0; } -#ifndef CONFIG_SYS_NO_FLASH -int flash_init_r(void) -{ - ulong size; - - puts("Flash: "); - - /* configure available FLASH banks */ - size = flash_init(); - - print_size(size, "\n"); - - return 0; -} -#endif - -#ifdef CONFIG_STATUS_LED -int status_led_set_r(void) -{ - status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING); - - return 0; -} -#endif - -int set_load_addr_r(void) -{ - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - - return 0; -} - int init_func_spi(void) { puts("SPI: "); @@ -200,7 +104,6 @@ int init_func_spi(void) return 0; } -#ifdef CONFIG_OF_CONTROL int find_fdt(void) { #ifdef CONFIG_OF_EMBED @@ -227,4 +130,3 @@ int prepare_fdt(void) return 0; } -#endif diff --git a/arch/x86/lib/init_wrappers.c b/arch/x86/lib/init_wrappers.c deleted file mode 100644 index 19af875..0000000 --- a/arch/x86/lib/init_wrappers.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2011 - * Graeme Russ, <graeme.russ@gmail.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <environment.h> -#include <fdtdec.h> -#include <serial.h> -#include <kgdb.h> -#include <scsi.h> -#include <post.h> -#include <miiphy.h> - -#include <asm/init_wrappers.h> - -int serial_initialize_r(void) -{ - serial_initialize(); - - return 0; -} - -/* - * Tell if it's OK to load the environment early in boot. - * - * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see - * if this is OK (defaulting to saying it's not OK). - * - * NOTE: Loading the environment early can be a bad idea if security is - * important, since no verification is done on the environment. - * - * @return 0 if environment should not be loaded, !=0 if it is ok to load - */ -static int should_load_env(void) -{ -#ifdef CONFIG_OF_CONTROL - return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 0); -#elif defined CONFIG_DELAY_ENVIRONMENT - return 0; -#else - return 1; -#endif -} - -int env_relocate_r(void) -{ - /* initialize environment */ - if (should_load_env()) - env_relocate(); - else - set_default_env(NULL); - - return 0; -} - - -int pci_init_r(void) -{ - /* Do pci configuration */ - pci_init(); - - return 0; -} - -int jumptable_init_r(void) -{ - jumptable_init(); - - return 0; -} - -int pcmcia_init_r(void) -{ - puts("PCMCIA:"); - pcmcia_init(); - - return 0; -} - -int kgdb_init_r(void) -{ - puts("KGDB: "); - kgdb_init(); - - return 0; -} - -int enable_interrupts_r(void) -{ - /* enable exceptions */ - enable_interrupts(); - - return 0; -} - -int eth_initialize_r(void) -{ - puts("Net: "); - eth_initialize(gd->bd); - - return 0; -} - -int reset_phy_r(void) -{ -#ifdef DEBUG - puts("Reset Ethernet PHY\n"); -#endif - reset_phy(); - - return 0; -} - -int ide_init_r(void) -{ - puts("IDE: "); - ide_init(); - - return 0; -} - -int scsi_init_r(void) -{ - puts("SCSI: "); - scsi_init(); - - return 0; -} - -#ifdef CONFIG_BITBANGMII -int bb_miiphy_init_r(void) -{ - bb_miiphy_init(); - - return 0; -} -#endif - -#ifdef CONFIG_POST -int post_run_r(void) -{ - post_run(NULL, POST_RAM | post_bootmode_get(0)); - - return 0; -} -#endif diff --git a/arch/x86/lib/pcat_timer.c b/arch/x86/lib/pcat_timer.c index b0b6637..1ca3eb9 100644 --- a/arch/x86/lib/pcat_timer.c +++ b/arch/x86/lib/pcat_timer.c @@ -24,83 +24,20 @@ #include <common.h> #include <asm/io.h> #include <asm/i8254.h> -#include <asm/ibmpc.h> -#include <asm/interrupt.h> -#define TIMER0_VALUE 0x04aa /* 1kHz 1.9318MHz / 1000 */ #define TIMER2_VALUE 0x0a8e /* 440Hz */ -static int timer_init_done; - -int timer_init(void) +int pcat_timer_init(void) { - /* initialize timer 0 and 2 - * - * Timer 0 is used to increment system_tick 1000 times/sec - * Timer 1 was used for DRAM refresh in early PC's - * Timer 2 is used to drive the speaker + /* + * initialize 2, used to drive the speaker * (to start a beep: write 3 to port 0x61, * to stop it again: write 0) */ - outb(PIT_CMD_CTR0 | PIT_CMD_BOTH | PIT_CMD_MODE2, - PIT_BASE + PIT_COMMAND); - outb(TIMER0_VALUE & 0xff, PIT_BASE + PIT_T0); - outb(TIMER0_VALUE >> 8, PIT_BASE + PIT_T0); - outb(PIT_CMD_CTR2 | PIT_CMD_BOTH | PIT_CMD_MODE3, PIT_BASE + PIT_COMMAND); outb(TIMER2_VALUE & 0xff, PIT_BASE + PIT_T2); outb(TIMER2_VALUE >> 8, PIT_BASE + PIT_T2); - irq_install_handler(0, timer_isr, NULL); - unmask_irq(0); - - timer_init_done = 1; - return 0; } - -static u16 read_pit(void) -{ - u8 low; - - outb(PIT_CMD_LATCH, PIT_BASE + PIT_COMMAND); - low = inb(PIT_BASE + PIT_T0); - - return (inb(PIT_BASE + PIT_T0) << 8) | low; -} - -/* this is not very exact */ -void __udelay(unsigned long usec) -{ - int counter; - int wraps; - - if (timer_init_done) { - counter = read_pit(); - wraps = usec / 1000; - usec = usec % 1000; - - usec *= 1194; - usec /= 1000; - usec += counter; - - while (usec > 1194) { - usec -= 1194; - wraps++; - } - - while (1) { - int new_count = read_pit(); - - if (((new_count < usec) && !wraps) || wraps < 0) - break; - - if (new_count > counter) - wraps--; - - counter = new_count; - } - } - -} diff --git a/arch/x86/lib/pci.c b/arch/x86/lib/pci.c deleted file mode 100644 index 71878dd..0000000 --- a/arch/x86/lib/pci.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <pci.h> -#include <asm/io.h> -#include <asm/pci.h> - -#undef PCI_ROM_SCAN_VERBOSE - -int pci_shadow_rom(pci_dev_t dev, unsigned char *dest) -{ - struct pci_controller *hose; - int res = -1; - int i; - - u32 rom_addr; - u32 addr_reg; - u32 size; - - u16 vendor; - u16 device; - u32 class_code; - - u32 pci_data; - - hose = pci_bus_to_hose(PCI_BUS(dev)); - - debug("pci_shadow_rom() asked to shadow device %x to %x\n", - dev, (u32)dest); - - pci_read_config_word(dev, PCI_VENDOR_ID, &vendor); - pci_read_config_word(dev, PCI_DEVICE_ID, &device); - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_code); - - class_code &= 0xffffff00; - class_code >>= 8; - - debug("PCI Header Vendor %04x device %04x class %06x\n", - vendor, device, class_code); - - /* Enable the rom addess decoder */ - pci_write_config_dword(dev, PCI_ROM_ADDRESS, (u32)PCI_ROM_ADDRESS_MASK); - pci_read_config_dword(dev, PCI_ROM_ADDRESS, &addr_reg); - - if (!addr_reg) { - /* register unimplemented */ - printf("pci_chadow_rom: device do not seem to have a rom\n"); - return -1; - } - - size = (~(addr_reg&PCI_ROM_ADDRESS_MASK)) + 1; - - debug("ROM is %d bytes\n", size); - - rom_addr = pci_get_rom_window(hose, size); - - debug("ROM mapped at %x\n", rom_addr); - - pci_write_config_dword(dev, PCI_ROM_ADDRESS, - pci_phys_to_mem(dev, rom_addr) - |PCI_ROM_ADDRESS_ENABLE); - - - for (i = rom_addr; i < rom_addr + size; i += 512) { - if (readw(i) == 0xaa55) { -#ifdef PCI_ROM_SCAN_VERBOSE - printf("ROM signature found\n"); -#endif - pci_data = readw(0x18 + i); - pci_data += i; - - if (0 == memcmp((void *)pci_data, "PCIR", 4)) { -#ifdef PCI_ROM_SCAN_VERBOSE - printf("Fount PCI rom image at offset %d\n", - i - rom_addr); - printf("Vendor %04x device %04x class %06x\n", - readw(pci_data + 4), readw(pci_data + 6), - readl(pci_data + 0x0d) & 0xffffff); - printf("%s\n", - (readw(pci_data + 0x15) & 0x80) ? - "Last image" : "More images follow"); - switch (readb(pci_data + 0x14)) { - case 0: - printf("X86 code\n"); - break; - case 1: - printf("Openfirmware code\n"); - break; - case 2: - printf("PARISC code\n"); - break; - } - printf("Image size %d\n", - readw(pci_data + 0x10) * 512); -#endif - /* - * FixMe: I think we should compare the class - * code bytes as well but I have no reference - * on the exact order of these bytes in the PCI - * ROM header - */ - if (readw(pci_data + 4) == vendor && - readw(pci_data + 6) == device && - readb(pci_data + 0x14) == 0) { -#ifdef PCI_ROM_SCAN_VERBOSE - printf("Suitable ROM image found\n"); -#endif - memmove(dest, (void *)rom_addr, - readw(pci_data + 0x10) * 512); - res = 0; - break; - - } - - if (readw(pci_data + 0x15) & 0x80) - break; - } - } - - } - -#ifdef PCI_ROM_SCAN_VERBOSE - if (res) - printf("No suitable image found\n"); -#endif - /* disable PAR register and PCI device ROM address devocer */ - pci_remove_rom_window(hose, rom_addr); - - pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0); - - return res; -} - -#ifdef PCI_BIOS_DEBUG - -void print_bios_bios_stat(void) -{ - printf("16 bit functions:\n"); - printf("pci_bios_present: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_present)); - printf("pci_bios_find_device: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_find_device)); - printf("pci_bios_find_class: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_find_class)); - printf("pci_bios_generate_special_cycle: %d\n", - RELOC_16_LONG(0xf000, - num_pci_bios_generate_special_cycle)); - printf("pci_bios_read_cfg_byte: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_byte)); - printf("pci_bios_read_cfg_word: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_word)); - printf("pci_bios_read_cfg_dword: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_read_cfg_dword)); - printf("pci_bios_write_cfg_byte: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_byte)); - printf("pci_bios_write_cfg_word: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_word)); - printf("pci_bios_write_cfg_dword: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_write_cfg_dword)); - printf("pci_bios_get_irq_routing: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_get_irq_routing)); - printf("pci_bios_set_irq: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_set_irq)); - printf("pci_bios_unknown_function: %d\n", - RELOC_16_LONG(0xf000, num_pci_bios_unknown_function)); -} -#endif diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index 18f0e62..59b3fe9 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -12,6 +12,8 @@ #include <physmem.h> #include <linux/compiler.h> +DECLARE_GLOBAL_DATA_PTR; + /* Large pages are 2MB. */ #define LARGE_PAGE_SIZE ((1 << 20) * 2) diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c index f178db9..21982db 100644 --- a/arch/x86/lib/relocate.c +++ b/arch/x86/lib/relocate.c @@ -39,6 +39,8 @@ #include <asm/sections.h> #include <elf.h> +DECLARE_GLOBAL_DATA_PTR; + int copy_uboot_to_ram(void) { size_t len = (size_t)&__data_end - (size_t)&__text_start; diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c deleted file mode 100644 index 1f8ce60..0000000 --- a/arch/x86/lib/timer.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * (C) Copyright 2008,2009 - * Graeme Russ, <graeme.russ@gmail.com> - * - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <malloc.h> -#include <asm/io.h> -#include <asm/i8254.h> -#include <asm/ibmpc.h> - -struct timer_isr_function { - struct timer_isr_function *next; - timer_fnc_t *isr_func; -}; - -static struct timer_isr_function *first_timer_isr; -static unsigned long system_ticks; - -/* - * register_timer_isr() allows multiple architecture and board specific - * functions to be called every millisecond. Keep the execution time of - * each function as low as possible - */ -int register_timer_isr(timer_fnc_t *isr_func) -{ - struct timer_isr_function *new_func; - struct timer_isr_function *temp; - int flag; - - new_func = malloc(sizeof(struct timer_isr_function)); - - if (new_func == NULL) - return 1; - - new_func->isr_func = isr_func; - new_func->next = NULL; - - /* - * Don't allow timer interrupts while the - * linked list is being modified - */ - flag = disable_interrupts(); - - if (first_timer_isr == NULL) { - first_timer_isr = new_func; - } else { - temp = first_timer_isr; - while (temp->next != NULL) - temp = temp->next; - temp->next = new_func; - } - - if (flag) - enable_interrupts(); - - return 0; -} - -/* - * timer_isr() MUST be the registered interrupt handler for - */ -void timer_isr(void *unused) -{ - struct timer_isr_function *temp = first_timer_isr; - - system_ticks++; - - /* Execute each registered function */ - while (temp != NULL) { - temp->isr_func(); - temp = temp->next; - } -} - -ulong get_timer(ulong base) -{ - return system_ticks - base; -} - -void timer_set_tsc_base(uint64_t new_base) -{ - gd->arch.tsc_base = new_base; -} - -uint64_t timer_get_tsc(void) -{ - uint64_t time_now; - - time_now = rdtsc(); - if (!gd->arch.tsc_base) - gd->arch.tsc_base = time_now; - - return time_now - gd->arch.tsc_base; -} diff --git a/arch/x86/lib/tsc_timer.c b/arch/x86/lib/tsc_timer.c new file mode 100644 index 0000000..c509801 --- /dev/null +++ b/arch/x86/lib/tsc_timer.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <asm/io.h> +#include <asm/i8254.h> +#include <asm/ibmpc.h> +#include <asm/msr.h> +#include <asm/u-boot-x86.h> + +DECLARE_GLOBAL_DATA_PTR; + +void timer_set_base(u64 base) +{ + gd->arch.tsc_base = base; +} + +/* + * Get the number of CPU time counter ticks since it was read first time after + * restart. This yields a free running counter guaranteed to take almost 6 + * years to wrap around even at 100GHz clock rate. + */ +u64 get_ticks(void) +{ + u64 now_tick = rdtsc(); + + /* We assume that 0 means the base hasn't been set yet */ + if (!gd->arch.tsc_base) + panic("No tick base available"); + return now_tick - gd->arch.tsc_base; +} + +#define PLATFORM_INFO_MSR 0xce + +/* Get the speed of the TSC timer in MHz */ +unsigned long get_tbclk_mhz(void) +{ + u32 ratio; + u64 platform_info = native_read_msr(PLATFORM_INFO_MSR); + + /* 100MHz times Max Non Turbo ratio */ + ratio = (platform_info >> 8) & 0xff; + return 100 * ratio; +} + +unsigned long get_tbclk(void) +{ + return get_tbclk_mhz() * 1000 * 1000; +} + +static ulong get_ms_timer(void) +{ + return (get_ticks() * 1000) / get_tbclk(); +} + +ulong get_timer(ulong base) +{ + return get_ms_timer() - base; +} + +ulong timer_get_us(void) +{ + return get_ticks() / get_tbclk_mhz(); +} + +ulong timer_get_boot_us(void) +{ + return timer_get_us(); +} + +void __udelay(unsigned long usec) +{ + u64 now = get_ticks(); + u64 stop; + + stop = now + usec * get_tbclk_mhz(); + + while ((int64_t)(stop - get_ticks()) > 0) + ; +} + +int timer_init(void) +{ +#ifdef CONFIG_SYS_PCAT_TIMER + /* Set up the PCAT timer if required */ + pcat_timer_init(); +#endif + + return 0; +} diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index 4e9e1f7..b54cf12 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -283,6 +283,13 @@ __weak void board_final_cleanup(void) void boot_zimage(void *setup_base, void *load_address) { + debug("## Transferring control to Linux (at address %08x) ...\n", + (u32)setup_base); + + bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel"); +#ifdef CONFIG_BOOTSTAGE_REPORT + bootstage_report(); +#endif board_final_cleanup(); printf("\nStarting kernel ...\n\n"); @@ -363,10 +370,6 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) return -1; } - printf("## Transferring control to Linux " - "(at address %08x) ...\n", - (u32)base_ptr); - /* we assume that the kernel is in place */ boot_zimage(base_ptr, load_address); /* does not return */ diff --git a/board/LaCie/net2big_v2/kwbimage.cfg b/board/LaCie/net2big_v2/kwbimage.cfg index 8d9f153..d3904d3 100644 --- a/board/LaCie/net2big_v2/kwbimage.cfg +++ b/board/LaCie/net2big_v2/kwbimage.cfg @@ -19,7 +19,7 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/LaCie/netspace_v2/kwbimage-is2.cfg b/board/LaCie/netspace_v2/kwbimage-is2.cfg index 590720a..93b803c 100644 --- a/board/LaCie/netspace_v2/kwbimage-is2.cfg +++ b/board/LaCie/netspace_v2/kwbimage-is2.cfg @@ -19,7 +19,7 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg index d008eb0..0a8a514 100644 --- a/board/LaCie/netspace_v2/kwbimage-ns2l.cfg +++ b/board/LaCie/netspace_v2/kwbimage-ns2l.cfg @@ -19,7 +19,7 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/LaCie/netspace_v2/kwbimage.cfg b/board/LaCie/netspace_v2/kwbimage.cfg index 7e53649..0cf4682 100644 --- a/board/LaCie/netspace_v2/kwbimage.cfg +++ b/board/LaCie/netspace_v2/kwbimage.cfg @@ -19,7 +19,7 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg index 0daf5b5..aeddc0c 100644 --- a/board/LaCie/wireless_space/kwbimage.cfg +++ b/board/LaCie/wireless_space/kwbimage.cfg @@ -22,7 +22,7 @@ # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Marvell/dreamplug/kwbimage.cfg b/board/Marvell/dreamplug/kwbimage.cfg index ca9cd74..e662b2d 100644 --- a/board/Marvell/dreamplug/kwbimage.cfg +++ b/board/Marvell/dreamplug/kwbimage.cfg @@ -24,7 +24,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Marvell/guruplug/kwbimage.cfg b/board/Marvell/guruplug/kwbimage.cfg index 2afd927..9baf6bc 100644 --- a/board/Marvell/guruplug/kwbimage.cfg +++ b/board/Marvell/guruplug/kwbimage.cfg @@ -21,7 +21,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg b/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg index ec2513f..f74d443 100644 --- a/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg +++ b/board/Marvell/mv88f6281gtw_ge/kwbimage.cfg @@ -21,7 +21,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Marvell/openrd/kwbimage.cfg b/board/Marvell/openrd/kwbimage.cfg index 757eb28..19d0bac 100644 --- a/board/Marvell/openrd/kwbimage.cfg +++ b/board/Marvell/openrd/kwbimage.cfg @@ -21,7 +21,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Marvell/rd6281a/kwbimage.cfg b/board/Marvell/rd6281a/kwbimage.cfg index 0d12dd9..c8b5d74 100644 --- a/board/Marvell/rd6281a/kwbimage.cfg +++ b/board/Marvell/rd6281a/kwbimage.cfg @@ -21,7 +21,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/Seagate/dockstar/kwbimage.cfg b/board/Seagate/dockstar/kwbimage.cfg index 98b514d..4b0351d 100644 --- a/board/Seagate/dockstar/kwbimage.cfg +++ b/board/Seagate/dockstar/kwbimage.cfg @@ -24,7 +24,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/alaska/Makefile b/board/alaska/Makefile deleted file mode 100644 index a21f851..0000000 --- a/board/alaska/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := $(BOARD).o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/alaska/README b/board/alaska/README deleted file mode 100644 index 3345073..0000000 --- a/board/alaska/README +++ /dev/null @@ -1,482 +0,0 @@ -Freescale Alaska MPC8220 board -============================== - -TsiChung Liew(Tsi-Chung.Liew@freescale.com) -Created 9/21/04 -=========================================== - - -Changed files: -============== - -- Makefile added MPC8220 and Alaska8220_config -- MAKEALL added MPC8220 and Alaska8220 -- README added CONFIG_MPC8220, Alaska8220_config - -- common/cmd_bdinfo.c added board information members for MPC8220 -- common/cmd_bootm.c added clocks for MPC8220 in do_bootm_linux() - -- include/common.h added CONFIG_MPC8220 - -- include/asm-ppc/u-boot.h added board information members for MPC8220 -- include/asm-ppc/global_data.h added global variables - inp_clk, pci_clk, - vco_clk, pev_clk, flb_clk, and bExtUart - -- arch/powerpc/lib/board.c added CONFIG_MPC8220 support - -- net/eth.c added FEC support for MPC8220 - -Added files: -============ -- board/alaska directory for Alaska MPC8220 -- board/alaska/alaska.c Alaska dram and BATs setup -- board/alaska/extserial.c external serial (debug card serial) support -- board/alaska/flash.c Socket (AMD) and Onboard (INTEL) flash support -- board/alaska/serial.c to determine which int/ext serial to use -- board/alaska/Makefile Makefile -- board/alaska/config.mk config make -- board/alaska/u-boot.lds Linker description - -- arch/powerpc/cpu/mpc8220/dma.h multi-channel dma header file -- arch/powerpc/cpu/mpc8220/dramSetup.h dram setup header file -- arch/powerpc/cpu/mpc8220/fec.h MPC8220 FEC header file -- arch/powerpc/cpu/mpc8220/cpu.c cpu specific code -- arch/powerpc/cpu/mpc8220/cpu_init.c Flexbus ChipSelect and Mux pins setup -- arch/powerpc/cpu/mpc8220/dramSetup.c MPC8220 DDR SDRAM setup -- arch/powerpc/cpu/mpc8220/fec.c MPC8220 FEC driver -- arch/powerpc/cpu/mpc8220/i2c.c MPC8220 I2C driver -- arch/powerpc/cpu/mpc8220/interrupts.c interrupt support (not enable) -- arch/powerpc/cpu/mpc8220/loadtask.c load dma -- arch/powerpc/cpu/mpc8220/speed.c system, pci, flexbus, pev, and cpu clock -- arch/powerpc/cpu/mpc8220/traps.c exception -- arch/powerpc/cpu/mpc8220/uart.c MPC8220 UART driver -- arch/powerpc/cpu/mpc8220/Makefile Makefile -- arch/powerpc/cpu/mpc8220/config.mk config make -- arch/powerpc/cpu/mpc8220/fec_dma_task.S MPC8220 FEC multi-channel dma program -- arch/powerpc/cpu/mpc8220/io.S io functions -- arch/powerpc/cpu/mpc8220/start.S start up - -- include/mpc8220.h - -- include/asm-ppc/immap_8220.h - -- include/configs/Alaska8220.h - - -1. SWITCH SETTINGS -================== -1.1 SW1: 0 - Boot from Socket Flash (AMD) or 1 - Onboard Flash (INTEL) - SW2: 0 - Select MPC8220 UART or 1 - Debug Card UART - SW3: unsed - SW4: 0 - 1284 or 1 - FEC1 - SW5: 0 - PEV or 1 - FEC2 - - -2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL -=========================================== -2.1. For the initial bringup, we adopted a consistent memory scheme between u-boot and - linux kernel, you can customize it based on your system requirements: - DDR: 0x00000000-0x1fffffff (max 512MB) - MBAR: 0xf0000000-0xf0027fff (128KB) - CPLD: 0xf1000000-0xf103ffff (256KB) - FPGA: 0xf2000000-0xf203ffff (256KB) - Flash: 0xfe000000-0xffffffff (max 32MB) - -3. DEFINITIONS AND COMPILATION -============================== -3.1 Explanation on NEW definitions in include/configs/alaska8220.h - CONFIG_MPC8220 MPC8220 specific - CONFIG_ALASKA8220 Alaska board specific - CONFIG_SYS_MPC8220_CLKIN Define Alaska Input Clock - CONFIG_PSC_CONSOLE Enable MPC8220 UART - CONFIG_EXTUART_CONSOLE Enable External 16552 UART - CONFIG_SYS_AMD_BOOT To determine the u-boot is booted from AMD or Intel - CONFIG_SYS_MBAR MBAR base address - CONFIG_SYS_DEFAULT_MBAR Reset MBAR base address - -3.2 Compilation - export CROSS_COMPILE=cross-compile-prefix - cd u-boot-1-1-x - make distclean - make Alaska8220_config - make - - -4. SCREEN DUMP -============== -4.1 Alaska MPC8220 board - Boot from AMD (NOTE: May not show exactly the same) - -U-Boot 1.1.1 (Sep 22 2004 - 22:14:41) - -CPU: MPC8220 (JTAG ID 1640301d) at 300 MHz - Bus 120 MHz, CPU 300 MHz, PCI 30 MHz, VCO 480 MHz -Board: Alaska MPC8220 Evaluation Board -I2C: 93 kHz, ready -DRAM: 256 MB -Reserving 167k for U-Boot at: 0ffd6000 -FLASH: 16.5 MB -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -Net: FEC ETHERNET -=> flinfo - -Bank # 1: INTEL 28F128J3A - Size: 8 MB in 64 Sectors - Sector Start Addresses: - FE000000 FE020000 FE040000 FE060000 FE080000 - FE0A0000 FE0C0000 FE0E0000 FE100000 FE120000 - FE140000 FE160000 FE180000 FE1A0000 FE1C0000 - FE1E0000 FE200000 FE220000 FE240000 FE260000 - FE280000 FE2A0000 FE2C0000 FE2E0000 FE300000 - FE320000 FE340000 FE360000 FE380000 FE3A0000 - FE3C0000 FE3E0000 FE400000 FE420000 FE440000 - FE460000 FE480000 FE4A0000 FE4C0000 FE4E0000 - FE500000 FE520000 FE540000 FE560000 FE580000 - FE5A0000 FE5C0000 FE5E0000 FE600000 FE620000 - FE640000 FE660000 FE680000 FE6A0000 FE6C0000 - FE6E0000 FE700000 FE720000 FE740000 FE760000 - FE780000 FE7A0000 FE7C0000 FE7E0000 - -Bank # 2: INTEL 28F128J3A - Size: 8 MB in 64 Sectors - Sector Start Addresses: - FE800000 FE820000 FE840000 FE860000 FE880000 - FE8A0000 FE8C0000 FE8E0000 FE900000 FE920000 - FE940000 FE960000 FE980000 FE9A0000 FE9C0000 - FE9E0000 FEA00000 FEA20000 FEA40000 FEA60000 - FEA80000 FEAA0000 FEAC0000 FEAE0000 FEB00000 - FEB20000 FEB40000 FEB60000 FEB80000 FEBA0000 - FEBC0000 FEBE0000 FEC00000 FEC20000 FEC40000 - FEC60000 FEC80000 FECA0000 FECC0000 FECE0000 - FED00000 FED20000 FED40000 FED60000 FED80000 - FEDA0000 FEDC0000 FEDE0000 FEE00000 FEE20000 - FEE40000 FEE60000 FEE80000 FEEA0000 FEEC0000 - FEEE0000 FEF00000 (RO) FEF20000 (RO) FEF40000 FEF60000 - FEF80000 FEFA0000 FEFC0000 FEFE0000 (RO) - -Bank # 3: AMD AMD29F040B - Size: 0 MB in 7 Sectors - Sector Start Addresses: - FFF00000 (RO) FFF10000 (RO) FFF20000 (RO) FFF30000 FFF40000 - FFF50000 FFF60000 - -Bank # 4: AMD AMD29F040B - Size: 0 MB in 1 Sectors - Sector Start Addresses: - FFF70000 (RO) -=> bdinfo - -memstart = 0xF0009800 -memsize = 0x10000000 -flashstart = 0xFFF00000 -flashsize = 0x01080000 -flashoffset = 0x00025000 -sramstart = 0xF0020000 -sramsize = 0x00008000 -bootflags = 0x00000001 -intfreq = 300 MHz -busfreq = 120 MHz -inpfreq = 30 MHz -flbfreq = 30 MHz -pcifreq = 30 MHz -vcofreq = 480 MHz -pevfreq = 81 MHz -ethaddr = 00:E0:0C:BC:E0:60 -eth1addr = 00:E0:0C:BC:E0:61 -IP addr = 192.162.1.2 -baudrate = 115200 bps -=> printenv -bootargs=root=/dev/ram rw -bootdelay=5 -baudrate=115200 -ethaddr=00:e0:0c:bc:e0:60 -eth1addr=00:e0:0c:bc:e0:61 -ipaddr=192.162.1.2 -serverip=192.162.1.1 -gatewayip=192.162.1.1 -netmask=255.255.255.0 -hostname=Alaska -stdin=serial -stdout=serial -stderr=serial -ethact=FEC ETHERNET - -Environment size: 268/65532 bytes -=> setenv ipaddr 192.160.1.2 -=> setenv serverip 192.160.1.1 -=> setenv gatewayip 192.160.1.1 -=> saveenv -Saving Environment to Flash... - -. -Un-Protected 1 sectors -Erasing Flash... -Erasing sector 0 ... done -Erased 1 sectors -Writing to Flash... done - -. -Protected 1 sectors -=> tftp 0x10000 linux.elf -Using FEC ETHERNET device -TFTP from server 192.160.1.1; our IP address is 192.160.1.2; sending through gateway 192.160.1.1 -Filename 'linux.elf'. -Load address: 0x10000 -Loading: invalid RARP header -################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################## -done -Bytes transferred = 2917494 (2c8476 hex) -=> bootelf -Loading .text @ 0x00a00000 (23820 bytes) -Loading .data @ 0x00a06000 (2752512 bytes) -Clearing .bss @ 0x00ca6000 (12764 bytes) -## Starting application at 0x00a00000 ... - -Collect some entropy from RAM........done -loaded at: 00A00000 00CA91DC -zimage at: 00A06A93 00AD7756 -initrd at: 00AD8000 00CA5565 -avail ram: 00CAA000 014AA000 - -Linux/PPC load: ip=off console=ttyS0,115200 -Uncompressing Linux...done. -Now booting the kernel -Total memory in system: 256 MB -Memory BAT mapping: BAT2=256Mb, BAT3=0Mb, residual: 0Mb -Linux version 2.4.21-rc1 (r61688@bluesocks.sps.mot.com) (gcc version 3.3.1) #17 Wed Sep 8 11:49:16 CDT 2004 -Motorola Alaska port (C) 2003 Motorola, Inc. -CPLD rev 3 -CPLD switches 0x1b -Set Pin Mux for FEC1 -Set Pin Mux for FEC2 -Alaska Pin Multiplexing: -Port Configuration Register 0 = 0 -Port Configuration Register 1 = 0 -Port Configuration Register 2 = 0 -Port Configuration Register 3 = 50000000 -Port Configuration Register 3 - PCI = 51400180 -Setup Alaska FPGA PIC: -Interrupt Enable Register *(u32) = 0 -Interrupt Status Register = 2f0000 -Interrupt Enable Register in_be32 = 0 -Interrupt Status Register = 2f0000 -Interrupt Enable Register in_le32 = 0 -Interrupt Status Register = 2f00 -Interrupt Enable Register readl = 0 -Interrupt Status Register = 2f00 -Interrupt Enable Register = 0 -Interrupt Status Register = 2f0000 -Setup Alaska PCI Controller: -On node 0 totalpages: 65536 -zone(0): 65536 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: ip=off console=ttyS0,115200 -Using XLB clock (120.00 MHz) to set up decrementer -Calibrating delay loop... 199.88 BogoMIPS -Memory: 254792k available (1476k kernel code, 708k data, 228k init, 0k highmem) -Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) -Inode cache hash table entries: 16384 (order: 5, 131072 bytes) -Mount cache hash table entries: 512 (order: 0, 4096 bytes) -Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) -Page-cache hash table entries: 65536 (order: 6, 262144 bytes) -POSIX conformance testing by UNIFIX -PCI: Probing PCI hardware -PCI: (pcibios_init) Global-Hose = 0xc029d000 -Scanning bus 00 -Fixups for bus 00 -Bus scan for 00 returning with max=00 -PCI: (pcibios_init) finished pci_scan_bus(hose->first_busno = 0, hose->ops = c01a1a74, hose = c029d000) -PCI: (pcibios_init) PCI Bus Count = 0 =?= Next Bus# = 1 -PCI: (pcibios_init@pci_fixup_irqs) finished machine dependent PCI interrupt routing! -PCI: bridge rsrc 81000000..81ffffff (100), parent c01a7f88 -PCI: bridge rsrc 84000000..87ffffff (200), parent c01a7fa4 -PCI: (pcibios_init) finished allocating and assigning resources! -initDma! -Using 90 DMA buffer descriptors -descUsed f0023600, descriptors f002360c freeSram f0024140 -unmask SDMA tasks: 0xf0008018 = 0x6f000000 -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -Journalled Block Device driver loaded -JFFS version 1.0, (C) 1999, 2000 Axis Communications AB -JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. -pty: 256 Unix98 ptys configured -tracek: Copyright (C) Motorola, 2003. -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -ttyS00 at 0xf1001008 (irq = 73) is a ST16650 -ttyS01 at 0xf1001010 (irq = 74) is a ST16650 -elp-fpanel: Copyright (C) Motorola, 2003. -fpanel: fpanelWait timeout -elp-engine: Copyright (C) Motorola, 2003. -Video disabled due to configuration switch 4 -Alpine 1284 driver: Copyright (C) Motorola, 2003. -1284 disabled due to configuration switch 5 -Alpine USB driver: Copyright (C) Motorola, 2003. -OK -USB: Descriptor download completed OK -enable_irq(41) unbalanced -enable_irq(75) unbalanced -elp-dmaram: Copyright (C) Motorola, 2003. -Total memory in system: 256 MB -elp_dmaram: offset is 0x10000000, size is 0 -Xicor NVRAM driver: Copyright (C) Motorola, 2003. -elp-video: Copyright (C) Motorola, 2003. -Video disabled due to configuration switch 4 -elp-pfm: Copyright (C) Motorola, 2003. -paddle: Copyright (C) Motorola, 2001, present. -RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize -loop: loaded (max 8 devices) -PPP generic driver version 2.4.2 -PPP Deflate Compression module registered -Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 -ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx -init_alaska_mtd: chip probing count 0 -cfi_cmdset_0001: Erase suspend on write enabled -Using buffer write method -init_alaska_mtd: bank1, name:ALASKA0, size:16777216bytes -ALASKA flash0: Using Static image partition definition -Creating 3 MTD partitions on "ALASKA0": -0x00000000-0x00280000 : "kernel" -0x00280000-0x00fe0000 : "user" -0x00fe0000-0x01000000 : "signature" -mgt_fec_module_init -mgt_fec_init() -mgt_fec_init -mgt_init_fec_dev(0xc05f6000,0) -dev c05f6000 fec_priv c05f6160 fec f0009000 -mgt_init_fec_dev(0xc05f6800,1) -dev c05f6800 fec_priv c05f6960 fec f0009800 -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 2048 buckets, 16Kbytes -TCP: Hash tables configured (established 16384 bind 32768) -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -RAMDISK: Compressed image found at block 0 -Freeing initrd memory: 1845k freed -JFFS: Trying to mount a non-mtd device. -VFS: Mounted root (romfs filesystem) readonly. -Freeing unused kernel memory: 228k init -INIT: version 2.78 booting -INIT: Entering runlevel: 1 -"Space, a great big place of unknown stuff." -Dexter, for our MotD. -[01/Jan/1970:00:00:01 +0000] boa: server version Boa/0.94.8.3 -[01/Jan/1970:00:00:01 +0000] boa: server built Sep 7 2004 at 17:40:55. -[01/Jan/1970:00:00:01 +0000] boa: starting server pid=28, port 80 -Mounting flash filesystem, will take a minute... -/etc/rc: line 30: /dev/lp0: No such devish-2.05b# -sh-2.05b# ifup eth0 -client (v0.9.9-pre) started -adapter index 2 -adapter hardware address 00:e0:0c:bc:e0:60 -execle'ing /usr/share/udhcpc/default.script -/sbin/ifconfig eth0 -eth0 Link encap:Ethernet HWaddr 00:E0:0C:BC:E0:60 - BROADCAST MULTICAST MTU:1500 Metric:1 - mgt_fec_open - Rfec request irq -X fec_open: rcv_ring_size 8, xmt_ring_size 8 -packmgt_fec_open(): call netif_start_queue() -ets:0 errors:0 dropped:0 overruns:0 frame:0 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 - collisions:0 txqueuelen:100 - RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) - Base address:0x9000 - -/sbin/ifconfig eth0 up -entering raw listen mode -Opening raw socket on ifindex 2 -adding option 0x35 -adding option 0x3d -adding option 0x3c -Sending discover... -Waiting on select... -unrelated/bogus packet -Waiting on select... -oooooh!!! got some! -adding option 0x35 -adding option 0x3d -adding option 0x3c -adding option 0x32 -adding option 0x36 -Sending select for 163.12.48.146... -Waiting on select... -oooooh!!! got some! -Waiting on select... -oooooh!!! got some! -Lease of 163.12.48.146 obtained, lease time 345600 -execle'ing /usr/share/udhcpc/default.script -/sbin/ifconfig eth0 163.12.48.146 netmask 255.255.254.0 -/sbin/ifconfig eth0 up -deleting routers -/sbin/route del default -/sbin/route add default gw 163.12.49.254 dev eth0 -adding dns 163.12.252.230 -adding dns 192.55.22.4 -adding dns 192.5.249.4 -entering none listen mode -sh-2.05b# - -5. REPROGRAM U-BOOT -=================== -5.1 Reprogram u-boot (boot from AMD) - 1. Unprotect the boot sector - => protect off bank 3 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfff00000 0xfff6ffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfff00000 - 5. Reset for the new u-boot to take place - => reset - -5.2 Reprogram u-boot (boot from AMD program at INTEL) - 1. Unprotect the boot sector - => protect off bank 2 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfef00000 0xfefdffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfef00000 - 5. Reset for the new u-boot to take place - => reset - -5.3 Reprogram u-boot (boot from INTEL) - 1. Unprotect the boot sector - => protect off bank 4 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfff00000 0xfffdffff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfff00000 - 5. Reset for the new u-boot to take place - => reset - -5.4 Reprogram u-boot (boot from INTEL program at AMD) - 1. Unprotect the boot sector - => protect off bank 1 - 2. Download new u-boot binary file - => tftp 0x10000 u-boot.bin - 3. Erase bootsector (max 7 sectors) - => erase 0xfe080000 0xfe0effff - 4. Program the u-boot to flash - => cp.b 0x10000 0xfe080000 - 5. Reset for the new u-boot to take place - => reset diff --git a/board/alaska/alaska.c b/board/alaska/alaska.c deleted file mode 100644 index 89c1abd..0000000 --- a/board/alaska/alaska.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * (C) Copyright 2004, Freescale Inc. - * TsiChung Liew, Tsi-Chung.Liew@freescale.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8220.h> -#include <asm/processor.h> -#include <asm/mmu.h> - -void setupBat (ulong size) -{ - ulong batu, batl; - int blocksize = 0; - - /* Flash 0 */ -#if defined (CONFIG_SYS_AMD_BOOT) - batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_512K | BPP_RW | BPP_RX; -#else - batu = CONFIG_SYS_FLASH0_BASE | BATU_BL_16M | BPP_RW | BPP_RX; -#endif - batl = CONFIG_SYS_FLASH0_BASE | 0x22; - write_bat (IBAT0, batu, batl); - write_bat (DBAT0, batu, batl); - - /* Flash 1 */ -#if defined (CONFIG_SYS_AMD_BOOT) - batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_16M | BPP_RW | BPP_RX; -#else - batu = CONFIG_SYS_FLASH1_BASE | BATU_BL_512K | BPP_RW | BPP_RX; -#endif - batl = CONFIG_SYS_FLASH1_BASE | 0x22; - write_bat (IBAT1, batu, batl); - write_bat (DBAT1, batu, batl); - - /* CPLD */ - batu = CONFIG_SYS_CPLD_BASE | BATU_BL_512K | BPP_RW | BPP_RX; - batl = CONFIG_SYS_CPLD_BASE | 0x22; - write_bat (IBAT2, 0, 0); - write_bat (DBAT2, batu, batl); - - /* FPGA */ - batu = CONFIG_SYS_FPGA_BASE | BATU_BL_512K | BPP_RW | BPP_RX; - batl = CONFIG_SYS_FPGA_BASE | 0x22; - write_bat (IBAT3, 0, 0); - write_bat (DBAT3, batu, batl); - - /* MBAR - Data only */ - batu = CONFIG_SYS_MBAR | BPP_RW | BPP_RX; - batl = CONFIG_SYS_MBAR | 0x22; - mtspr (IBAT4L, 0); - mtspr (IBAT4U, 0); - mtspr (DBAT4L, batl); - mtspr (DBAT4U, batu); - - /* MBAR - SRAM */ - batu = CONFIG_SYS_SRAM_BASE | BPP_RW | BPP_RX; - batl = CONFIG_SYS_SRAM_BASE | 0x42; - mtspr (IBAT5L, batl); - mtspr (IBAT5U, batu); - mtspr (DBAT5L, batl); - mtspr (DBAT5U, batu); - - if (size <= 0x800000) /* 8MB */ - blocksize = BATU_BL_8M; - else if (size <= 0x1000000) /* 16MB */ - blocksize = BATU_BL_16M; - else if (size <= 0x2000000) /* 32MB */ - blocksize = BATU_BL_32M; - else if (size <= 0x4000000) /* 64MB */ - blocksize = BATU_BL_64M; - else if (size <= 0x8000000) /* 128MB */ - blocksize = BATU_BL_128M; - else if (size <= 0x10000000) /* 256MB */ - blocksize = BATU_BL_256M; - - /* Memory */ - batu = CONFIG_SYS_SDRAM_BASE | blocksize | BPP_RW | BPP_RX; - batl = CONFIG_SYS_SDRAM_BASE | 0x42; - mtspr (IBAT6L, batl); - mtspr (IBAT6U, batu); - mtspr (DBAT6L, batl); - mtspr (DBAT6U, batu); - - /* memory size is less than 256MB */ - if (size <= 0x10000000) { - /* Nothing */ - batu = 0; - batl = 0; - } else { - size -= 0x10000000; - if (size <= 0x800000) /* 8MB */ - blocksize = BATU_BL_8M; - else if (size <= 0x1000000) /* 16MB */ - blocksize = BATU_BL_16M; - else if (size <= 0x2000000) /* 32MB */ - blocksize = BATU_BL_32M; - else if (size <= 0x4000000) /* 64MB */ - blocksize = BATU_BL_64M; - else if (size <= 0x8000000) /* 128MB */ - blocksize = BATU_BL_128M; - else if (size <= 0x10000000) /* 256MB */ - blocksize = BATU_BL_256M; - - batu = (CONFIG_SYS_SDRAM_BASE + - 0x10000000) | blocksize | BPP_RW | BPP_RX; - batl = (CONFIG_SYS_SDRAM_BASE + 0x10000000) | 0x42; - } - - mtspr (IBAT7L, batl); - mtspr (IBAT7U, batu); - mtspr (DBAT7L, batl); - mtspr (DBAT7U, batu); -} - -phys_size_t initdram (int board_type) -{ - ulong size; - - size = dramSetup (); - -/* if iCache ad dCache is defined */ -#if defined(CONFIG_CMD_CACHE) -/* setupBat(size);*/ -#endif - - return size; -} - -int checkboard (void) -{ - puts ("Board: Alaska MPC8220 Evaluation Board\n"); - - return 0; -} diff --git a/board/alaska/flash.c b/board/alaska/flash.c deleted file mode 100644 index 977822a..0000000 --- a/board/alaska/flash.c +++ /dev/null @@ -1,945 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#define FLASH_PORT_WIDTH8 - -typedef unsigned char FLASH_PORT_WIDTH; -typedef volatile unsigned char FLASH_PORT_WIDTHV; - -#define SWAP(x) (x) - -/* Intel-compatible flash ID */ -#define INTEL_COMPAT 0x89 -#define INTEL_ALT 0xB0 - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x10 -#define INTEL_ERASE 0x20 -#define INTEL_CLEAR 0x50 -#define INTEL_LOCKBIT 0x60 -#define INTEL_PROTECT 0x01 -#define INTEL_STATUS 0x70 -#define INTEL_READID 0x90 -#define INTEL_CONFIRM 0xD0 -#define INTEL_RESET 0xFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x80 -#define INTEL_OK 0x80 - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02aa - -#define WR_BLOCK 0x20 -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static int write_data_block (flash_info_t * info, ulong src, ulong dest); -static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -static void flash_sync_real_protect (flash_info_t * info); -static unsigned char intel_sector_protected (flash_info_t *info, ushort sector); -static unsigned char same_chip_banks (int bank1, int bank2); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - ulong fsize = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - memset (&flash_info[i], 0, sizeof (flash_info_t)); - - switch (i) { - case 0: - flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE, - &flash_info[i]); - flash_get_offsets (CONFIG_SYS_FLASH1_BASE, &flash_info[i]); - break; - case 1: - flash_get_size ((FPW *) CONFIG_SYS_FLASH1_BASE, - &flash_info[i]); - fsize = CONFIG_SYS_FLASH1_BASE + flash_info[i - 1].size; - flash_get_offsets (fsize, &flash_info[i]); - break; - case 2: - flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, - &flash_info[i]); - flash_get_offsets (CONFIG_SYS_FLASH0_BASE, &flash_info[i]); - break; - case 3: - flash_get_size ((FPW *) CONFIG_SYS_FLASH0_BASE, - &flash_info[i]); - fsize = CONFIG_SYS_FLASH0_BASE + flash_info[i - 1].size; - flash_get_offsets (fsize, &flash_info[i]); - break; - default: - panic ("configured to many flash banks!\n"); - break; - } - size += flash_info[i].size; - - /* get the h/w and s/w protection status in sync */ - flash_sync_real_protect(&flash_info[i]); - } - - /* Protect monitor and environment sectors - */ -#if defined (CONFIG_SYS_AMD_BOOT) - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[2]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_INTEL_BASE, - CONFIG_SYS_INTEL_BASE + monitor_flash_len - 1, - &flash_info[1]); -#else - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[3]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_AMD_BASE, - CONFIG_SYS_AMD_BASE + monitor_flash_len - 1, &flash_info[0]); -#endif - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV1_ADDR, - CONFIG_ENV1_ADDR + CONFIG_ENV1_SIZE - 1, &flash_info[1]); - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[3]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_AMD_SECT_SIZE); - info->protect[i] = 0; - } - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_INTEL_SECT_SIZE); - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - case FLASH_MAN_AMD: - printf ("AMD "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - - case FLASH_AM040: - printf ("AMD29F040B\n"); - break; - - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - FPWV value; - static int amd = 0; - - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */ - __asm__ ("sync"); - addr[FLASH_CYCLE2] = (FPW) 0x00550055; /* for AMD, Intel ignores this */ - __asm__ ("sync"); - addr[FLASH_CYCLE1] = (FPW) 0x00900090; /* selects Intel or AMD */ - __asm__ ("sync"); - - udelay (100); - - switch (addr[0] & 0xff) { - - case (uchar) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - value = addr[1]; - break; - - case (uchar) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - value = addr[2]; - break; - - default: - printf ("unknown\n"); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - switch (value) { - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 64; - info->size = 0x00800000; /* => 16 MB */ - break; - - case (FPW) AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - if (amd == 0) { - info->sector_count = 7; - info->size = 0x00070000; /* => 448 KB */ - amd = 1; - } else { - /* for Environment settings */ - info->sector_count = 1; - info->size = PHYS_AMD_SECT_SIZE; /* => 64 KB */ - amd = 0; - } - break; - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if (value == (FPW) INTEL_ID_28F128J3A) - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - else - addr[0] = (FPW) 0x00F000F0; /* restore read mode */ - - return (info->size); -} - - -/* - * This function gets the u-boot flash sector protection status - * (flash_info_t.protect[]) in sync with the sector protection - * status stored in hardware. - */ -static void flash_sync_real_protect (flash_info_t * info) -{ - int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F128J3A: - for (i = 0; i < info->sector_count; ++i) { - info->protect[i] = intel_sector_protected(info, i); - } - break; - case FLASH_AM040: - default: - /* no h/w protect support */ - break; - } -} - - -/* - * checks if "sector" in bank "info" is protected. Should work on intel - * strata flash chips 28FxxxJ3x in 8-bit mode. - * Returns 1 if sector is protected (or timed-out while trying to read - * protection status), 0 if it is not. - */ -static unsigned char intel_sector_protected (flash_info_t *info, ushort sector) -{ - FPWV *addr; - FPWV *lock_conf_addr; - ulong start; - unsigned char ret; - - /* - * first, wait for the WSM to be finished. The rationale for - * waiting for the WSM to become idle for at most - * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy - * because of: (1) erase, (2) program or (3) lock bit - * configuration. So we just wait for the longest timeout of - * the (1)-(3), i.e. the erase timeout. - */ - - /* wait at least 35ns (W12) before issuing Read Status Register */ - udelay(1); - addr = (FPWV *) info->start[sector]; - *addr = (FPW) INTEL_STATUS; - - start = get_timer (0); - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - printf("WSM busy too long, can't get prot status\n"); - return 1; - } - } - - /* issue the Read Identifier Codes command */ - *addr = (FPW) INTEL_READID; - - /* wait at least 35ns (W12) before reading */ - udelay(1); - - /* Intel example code uses offset of 4 for 8-bit flash */ - lock_conf_addr = (FPWV *) info->start[sector] + 4; - ret = (*lock_conf_addr & (FPW) INTEL_PROTECT) ? 1 : 0; - - /* put flash back in read mode */ - *addr = (FPW) INTEL_RESET; - - return ret; -} - - -/* - * Checks if "bank1" and "bank2" are on the same chip. Returns 1 if they - * are and 0 otherwise. - */ -static unsigned char same_chip_banks (int bank1, int bank2) -{ - unsigned char same_chip[CONFIG_SYS_MAX_FLASH_BANKS][CONFIG_SYS_MAX_FLASH_BANKS] = { - {1, 1, 0, 0}, - {1, 1, 0, 0}, - {0, 0, 1, 1}, - {0, 0, 1, 1} - }; - return same_chip[bank1][bank2]; -} - - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0, intel = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf ("- missing\n"); - else - printf ("- no sectors to erase\n"); - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_AMD)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - } - - if (type == FLASH_MAN_INTEL) - intel = 1; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register */ - *addr = (FPW) 0x00200020; /* erase setup */ - *addr = (FPW) 0x00D000D0; /* erase confirm */ - } else { - FPWV *base; /* first address in bank */ - - base = (FPWV *) (CONFIG_SYS_AMD_BASE); - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - *addr = (FPW) 0x00300030; /* erase sector */ - } - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - if (intel) { - *addr = (FPW) 0x00B000B0; /* suspend erase */ - *addr = (FPW) 0x00FF00FF; /* reset to read mode */ - } else - *addr = (FPW) 0x00F000F0; /* reset to read mode */ - - rcode = 1; - break; - } - } - - if (intel) { - *addr = (FPW) 0x00500050; /* clear status register cmd. */ - *addr = (FPW) 0x00FF00FF; /* resest to read mode */ - } else - *addr = (FPW) 0x00F000F0; /* reset to read mode */ - - printf (" done\n"); - } - } - if (flag) - enable_interrupts(); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - { - FPW data = 0; /* 16 or 32 bit word, matches flash bus width */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof (data), left -= - sizeof (data) - bytes) { - - bytes = addr & (sizeof (data) - 1); - addr &= ~(sizeof (data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof (data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left) - data += *((uchar *) addr + i); - else - data += *src++; - } - - res = write_word_amd (info, (FPWV *) addr, - data); - } - return res; - } /* case FLASH_MAN_AMD */ - - case FLASH_MAN_INTEL: - { - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - /* get lower word aligned address */ - wp = addr; - port_width = 1; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = - write_data (info, wp, SWAP (data))) != 0) - return (rc); - wp += port_width; - } - - if (cnt > WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= WR_BLOCK) { - - if ((rc = - write_data_block (info, - (ulong) src, - wp)) != 0) - return (rc); - - wp += WR_BLOCK; - src += WR_BLOCK; - cnt -= WR_BLOCK; - - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - } - - if (cnt < WR_BLOCK) { - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) - data = (data << 8) | *src++; - - if ((rc = - write_data (info, wp, - SWAP (data))) != 0) - return (rc); - - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - } - - if (cnt == 0) - return (0); - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; - ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - - for (; i < port_width; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - return (write_data (info, wp, SWAP (data))); - } /* case FLASH_MAN_INTEL */ - - } /* switch */ - return (0); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong start; - int flag, rc = 0; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong)addr, (ulong)*addr); - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = 1; - goto OUT; - } - } - -OUT: - *addr = (FPW)0x00FF00FF; /* restore read mode */ - - if (flag) - enable_interrupts(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data_block (flash_info_t * info, ulong src, ulong dest) -{ - FPWV *srcaddr = (FPWV *) src; - FPWV *dstaddr = (FPWV *) dest; - ulong start; - int flag, i, rc = 0; - - /* Check if Flash is (sufficiently) erased */ - for (i = 0; i < WR_BLOCK; i++) - if ((*dstaddr++ & 0xff) != 0xff) { - printf ("not erased at %08lx (%lx)\n", - (ulong)dstaddr, (ulong)*dstaddr); - return (2); - } - - dstaddr = (FPWV *) dest; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *dstaddr = (FPW) 0x00e800e8; /* write block setup */ - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - rc = 1; - goto OUT; - } - } - - *dstaddr = (FPW) 0x001f001f; /* write 32 to buffer */ - for (i = 0; i < WR_BLOCK; i++) - *dstaddr++ = *srcaddr++; - - dstaddr -= 1; - *dstaddr = (FPW) 0x00d000d0; /* write 32 to buffer */ - - /* arm simple, non interrupt dependent timer */ - start = get_timer (0); - - /* wait while polling the status register */ - while ((*dstaddr & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dstaddr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - -OUT: - *dstaddr = (FPW)0x00FF00FF; /* restore read mode */ - if (flag) - enable_interrupts(); - - return rc; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t * info, FPWV * dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - base = (FPWV *) (CONFIG_SYS_AMD_BASE); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - base[FLASH_CYCLE1] = (FPW) 0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW) 0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW) 0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - start = get_timer (0); - - /* data polling for D7 */ - while (res == 0 - && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW) 0x00F000F0; /* reset bank */ - res = 1; - } - } - - return (res); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect (flash_info_t * info, long sector, int prot) -{ - ulong start; - int i, j; - int curr_bank; - int bank; - int rc = 0; - FPWV *addr = (FPWV *) (info->start[sector]); - int flag = disable_interrupts (); - - /* - * 29F040B AMD flash does not support software protection/unprotection, - * the only way to protect the AMD flash is marked it as prot bit. - * This flash only support hardware protection, by supply or not supply - * 12vpp to the flash - */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) { - info->protect[sector] = prot; - - return 0; - } - - *addr = INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - } else { /* Clear sector lock bit */ - *addr = INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = INTEL_CONFIRM; /* clear */ - } - - start = get_timer (0); - - while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) { - if (get_timer (start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf ("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != INTEL_OK) { - printf ("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint) addr, (uint) * addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) { - /* - * re-locking must be done for all banks that belong on one - * FLASH chip, as all the sectors on the chip were unlocked - * by INTEL_LOCKBIT/INTEL_CONFIRM commands. (let's hope - * that banks never span chips, in particular chips which - * support h/w protection differently). - */ - - /* find the current bank number */ - curr_bank = CONFIG_SYS_MAX_FLASH_BANKS + 1; - for (j = 0; j < CONFIG_SYS_MAX_FLASH_BANKS; ++j) { - if (&flash_info[j] == info) { - curr_bank = j; - } - } - if (curr_bank == CONFIG_SYS_MAX_FLASH_BANKS + 1) { - printf("Error: can't determine bank number!\n"); - } - - for (bank = 0; bank < CONFIG_SYS_MAX_FLASH_BANKS; ++bank) { - if (!same_chip_banks(curr_bank, bank)) { - continue; - } - info = &flash_info[bank]; - for (i = 0; i < info->sector_count; i++) { - if (info->protect[i]) { - start = get_timer (0); - addr = (FPWV *) (info->start[i]); - *addr = INTEL_LOCKBIT; /* Sector lock bit */ - *addr = INTEL_PROTECT; /* set */ - while ((*addr & INTEL_FINISHED) != - INTEL_FINISHED) { - if (get_timer (start) > - CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf ("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - } - } - } - - /* - * get the s/w sector protection status in sync with the h/w, - * in case something went wrong during the re-locking. - */ - flash_sync_real_protect(info); /* resets flash to read mode */ - } - - if (flag) - enable_interrupts (); - - *addr = INTEL_RESET; /* Reset to read array mode */ - - return rc; -} diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c new file mode 100644 index 0000000..e0c8d93 --- /dev/null +++ b/board/bf609-ezkit/soft_switch.c @@ -0,0 +1,171 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <i2c.h> +#include "soft_switch.h" + +struct switch_config { + uchar dir0; /* IODIRA */ + uchar dir1; /* IODIRB */ + uchar value0; /* OLATA */ + uchar value1; /* OLATB */ +}; + +static struct switch_config switch_config_array[NUM_SWITCH] = { + { +/* + U45 Port A U45 Port B + + 7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN + | 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN + | | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN + | | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN + | | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK + | | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN + | | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN + | | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN + | | | | | | | | | | | | | | | | | + O O O O O O O O | O O O O O O O O (I/O direction) + 1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 (value being set) +*/ + .dir0 = 0x0, /* all output */ + .dir1 = 0x0, /* all output */ + .value0 = RMII_CLK_EN | CAN_STB | CAN_EN, + .value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN + | UART0CTS_RST_EN | UART0CTS_RTS_LPBK, + }, + { +/* + U46 Port A U46 Port B + + 7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY + | 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN + | | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN + | | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN + | | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN + | | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN + | | | | | | 1--- SMC0_EPPI2 | | | | | | | 1--- ~PUSHBUTTON2_EN + _LP1_SWITCH + | | | | | | | 0- OVERRIDE_SMC0 | | | | | | | | 0- ~PUSHBUTTON1_EN + _LP0_BOOT + | | | | | | | | | | | | | | | | | + O O O O O O O O | O O O O O O O O (I/O direction) + 0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 (value being set) +*/ + .dir0 = 0x0, /* all output */ + .dir1 = 0x0, /* all output */ +#ifdef CONFIG_BFIN_LINKPORT + .value0 = OVERRIDE_SMC0_LP0_BOOT, +#else + .value0 = SMC0_EPPI2_LP1_SWITCH, +#endif + .value1 = 0x0, + }, + { +/* + U47 Port A U47 Port B + + 7--------------- ~PD2_SPI0MISO | 7--------------- EMPTY + _EI3_EN + | 6------------- ~PD1_SPI0D3 | | 6------------- EMPTY + _EPPI1D17 + _SPI0SEL2 + _EI3_EN + | | 5----------- ~PD0_SPI0D2 | | | 5----------- EMPTY + _EPPI1D16 + _SPI0SEL3 + _EI3_EN + | | | 4--------- ~WAKE_PUSH | | | | 4--------- EMPTY + BUTTON_EN + | | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY + | | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY + | | | | | | 1--- PHY_PWR | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN + _DWN_INT + | | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN + | | | | | | | | | | | | | | | | | + O O O O O I I O | O O O O O O O O (I/O direction) + 1 1 1 0 0 0 0 0 | X X X X X X 1 1 (value being set) +*/ + .dir0 = 0x6, /* bits 1 and 2 input, all others output */ + .dir1 = 0x0, /* all output */ + .value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN, + .value1 = 0, + }, +}; + +static int setup_soft_switch(int addr, struct switch_config *config) +{ + int ret = 0; + + ret = i2c_write(addr, OLATA, 1, &config->value0, 1); + if (ret) + return ret; + ret = i2c_write(addr, OLATB, 1, &config->value1, 1); + if (ret) + return ret; + + ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1); + if (ret) + return ret; + return i2c_write(addr, IODIRB, 1, &config->dir1, 1); +} + +int config_switch_bit(int addr, int port, int bit, int dir, uchar value) +{ + int ret, data_reg, dir_reg; + uchar tmp; + + if (port == IO_PORT_A) { + data_reg = OLATA; + dir_reg = IODIRA; + } else { + data_reg = OLATB; + dir_reg = IODIRB; + } + + if (dir == IO_PORT_INPUT) { + ret = i2c_read(addr, dir_reg, 1, &tmp, 1); + if (ret) + return ret; + tmp |= bit; + return i2c_write(addr, dir_reg, 1, &tmp, 1); + } else { + ret = i2c_read(addr, data_reg, 1, &tmp, 1); + if (ret) + return ret; + if (value) + tmp |= bit; + else + tmp &= ~bit; + ret = i2c_write(addr, data_reg, 1, &tmp, 1); + if (ret) + return ret; + ret = i2c_read(addr, dir_reg, 1, &tmp, 1); + if (ret) + return ret; + tmp &= ~bit; + return i2c_write(addr, dir_reg, 1, &tmp, 1); + } +} + +int setup_board_switches(void) +{ + int ret; + int i; + + for (i = 0; i < NUM_SWITCH; i++) { + ret = setup_soft_switch(SWITCH_ADDR + i, + &switch_config_array[i]); + if (ret) + return ret; + } + return 0; +} diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h new file mode 100644 index 0000000..d147fe1 --- /dev/null +++ b/board/bf609-ezkit/soft_switch.h @@ -0,0 +1,80 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BOARD_SOFT_SWITCH_H__ +#define __BOARD_SOFT_SWITCH_H__ + +#include <asm/soft_switch.h> + +/* switch 0 port A */ +#define CAN_EN 0x1 +#define CAN_STB 0x2 +#define CAN0_ERR_EN 0x4 +#define CAN0RX_EN 0x8 +#define CNT0UD_EN 0x10 +#define CNT0DG_EN 0x20 +#define CNT0ZM_EN 0x40 +#define RMII_CLK_EN 0x80 + +/* switch 0 port B */ +#define UART0RTS_EN 0x1 +#define UART0RX_EN 0x2 +#define UART0CTS_EN 0x4 +#define UART0CTS_RTS_LPBK 0x8 +#define UART0CTS_RST_EN 0x10 +#define UART0CTS_146_EN 0x20 +#define TEMP_IRQ_EN 0x40 +#define TEMP_THERM_EN 0x80 + +/* switch 1 port A */ +#define OVERRIDE_SMC0_LP0_BOOT 0x1 +#define SMC0_EPPI2_LP1_SWITCH 0x2 +#define SMC0_LP0_EN 0x8 +#define LED1_GPIO_EN 0x10 +#define LED2_GPIO_EN 0x20 +#define LED3_GPIO_EN 0x40 +#define LED4_GPIO_EN 0x80 + +/* switch 1 port B */ +#define PUSHBUTTON1_EN 0x1 +#define PUSHBUTTON2_EN 0x2 +#define SD_CD_EN 0x4 +#define SD_WP_EN 0x8 +#define SPIFLASH_CS_EN 0x10 +#define SPI0D2_EN 0x20 +#define SPI0D3_EN 0x40 + +/* switch 2 port A */ +#define PHYINT_EN 0x1 +#define PHY_PWR_DWN_INT 0x2 +#define PHYAD0 0x4 +#define ETHERNET_EN 0x8 +#define WAKE_PUSHBUTTON_EN 0x10 +#define PD0_SPI0D2_EN 0x20 +#define PD1_SPI0D3_EN 0x40 +#define PD2_SPI0MISO_EN 0x80 + +/* switch 2 port B */ +#define PD3_SPI0MOSI_EN 0x1 +#define PD4_SPI0CK_EN 0x2 + +#ifdef CONFIG_BFIN_BOARD_VERSION_1_0 +#define SWITCH_ADDR 0x21 +#else +#define SWITCH_ADDR 0x20 +#endif + +#define NUM_SWITCH 3 +#define IODIRA 0x0 +#define IODIRB 0x1 +#define OLATA 0x14 +#define OLATB 0x15 + +int setup_board_switches(void); + +#endif /* __BOARD_SOFT_SWITCH_H__ */ diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg index d6da96c..6625790 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg index 0b1c35c..dccd497 100644 --- a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg index 680a853..e317374 100644 --- a/board/boundary/nitrogen6x/nitrogen6q.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg index f57ab0e..5a06220 100644 --- a/board/boundary/nitrogen6x/nitrogen6q2g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg index b5af5cc..d7d5f29 100644 --- a/board/boundary/nitrogen6x/nitrogen6s.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg index 5aeefc8..cf2690a 100644 --- a/board/boundary/nitrogen6x/nitrogen6s1g.cfg +++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/buffalo/lsxl/kwbimage-lschl.cfg b/board/buffalo/lsxl/kwbimage-lschl.cfg index 2b9b3cd..4ac381e 100644 --- a/board/buffalo/lsxl/kwbimage-lschl.cfg +++ b/board/buffalo/lsxl/kwbimage-lschl.cfg @@ -20,7 +20,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/buffalo/lsxl/kwbimage-lsxhl.cfg b/board/buffalo/lsxl/kwbimage-lsxhl.cfg index 8a94b6c..c62f22c 100644 --- a/board/buffalo/lsxl/kwbimage-lsxhl.cfg +++ b/board/buffalo/lsxl/kwbimage-lsxhl.cfg @@ -20,7 +20,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/cloudengines/pogo_e02/kwbimage.cfg b/board/cloudengines/pogo_e02/kwbimage.cfg index a02e88d..32c0cd5 100644 --- a/board/cloudengines/pogo_e02/kwbimage.cfg +++ b/board/cloudengines/pogo_e02/kwbimage.cfg @@ -23,7 +23,7 @@ # You should have received a copy of the GNU General Public License # along with this program; If not, see <http://www.gnu.org/licenses/>. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/d-link/dns325/kwbimage.cfg b/board/d-link/dns325/kwbimage.cfg index 97cb090..6df7939 100644 --- a/board/d-link/dns325/kwbimage.cfg +++ b/board/d-link/dns325/kwbimage.cfg @@ -25,7 +25,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg index fce7492..ab22385 100644 --- a/board/esg/ima3-mx53/imximage.cfg +++ b/board/esg/ima3-mx53/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 41887c2..a39c17a 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -166,11 +166,13 @@ int configure_vsc3316_3308(void) ret = select_i2c_ch_pca(I2C_CH_VSC3316); if (!ret) { ret = vsc3316_config(VSC3316_TX_ADDRESS, - vsc16_tx_sgmii_lane_ab, num_vsc16_con); + vsc16_tx_4sfp_sgmii_12_56, + num_vsc16_con); if (ret) return ret; ret = vsc3316_config(VSC3316_RX_ADDRESS, - vsc16_rx_sgmii_lane_ab, num_vsc16_con); + vsc16_rx_4sfp_sgmii_12_56, + num_vsc16_con); if (ret) return ret; } else { diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h index 994dec5..c2b6c44 100644 --- a/board/freescale/b4860qds/b4860qds_crossbar_con.h +++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h @@ -26,42 +26,53 @@ static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10}, {5, 11}, {4, 5}, {2, 6}, {12, 9} }; -static const int8_t vsc16_tx_sfp[8][2] = { {15, 8}, {0, 0}, {7, 7}, {9, 1}, - {5, 15}, {4, 14}, {2, 12}, {12, 13} }; +static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, + {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_tx_sgmii_lane_ab[8][2] = { {2, 14}, {12, 15}, - {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; +static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1}, + {7, 8}, {9, 0}, {2, 14}, {12, 15}, + {-1, -1}, {-1, -1} }; + +static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1}, + {7, 8}, {9, 0}, {5, 14}, {4, 15}, + {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif + static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9}, {11, 11}, {5, 10}, {6, 3}, {9, 12} }; -static const int8_t vsc16_rx_sfp[8][2] = { {0, 15}, {8, 1}, {1, 8}, {7, 9}, +static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_rx_sgmii_lane_ab[8][2] = { {14, 3}, {15, 12}, - {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; +static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1}, + {7, 8}, {1, 9}, {14, 3}, {15, 12}, + {-1, -1}, {-1, -1} }; + +static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1}, + {7, 8}, {1, 9}, {14, 11}, {15, 10}, + {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif -static const int8_t vsc16_rx_aurora[8][2] = { {12, 3}, {13, 12}, {-1, -1}, +static const int8_t vsc16_rx_aurora[8][2] = { {13, 3}, {12, 12}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; static const int8_t vsc08_tx_amc[4][2] = { {2, 2}, {3, 3}, {7, 4}, {1, 5} }; -static const int8_t vsc08_tx_sfp[4][2] = { {2, 6}, {3, 7}, {7, 1}, {1, 0} }; +static const int8_t vsc08_tx_sfp[4][2] = { {2, 1}, {3, 0}, {7, 6}, {1, 7} }; static const int8_t vsc08_rx_amc[4][2] = { {2, 3}, {3, 4}, {4, 7}, {5, 1} }; -static const int8_t vsc08_rx_sfp[4][2] = { {6, 3}, {7, 4}, {1, 7}, {0, 1} }; +static const int8_t vsc08_rx_sfp[4][2] = { {1, 3}, {0, 4}, {6, 7}, {7, 1} }; #endif diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index dd4c0f6..b82b3d4 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -13,6 +13,7 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h> DECLARE_GLOBAL_DATA_PTR; @@ -188,3 +189,74 @@ phys_size_t initdram(int board_type) puts(" DDR: "); return dram_size; } + +unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]) +{ + int i, j; + unsigned long long total_mem, current_mem_base, total_ctlr_mem; + unsigned long long rank_density, ctlr_density = 0; + + current_mem_base = 0ull; + total_mem = 0; + /* + * This board has soldered DDR chips. DDRC1 has two rank. + * DDRC2 has only one rank. + * Assigning DDRC2 to lower address and DDRC1 to higher address. + */ + if (pinfo->memctl_opts[0].memctl_interleaving) { + rank_density = pinfo->dimm_params[0][0].rank_density >> + dbw_cap_adj[0]; + ctlr_density = rank_density; + + debug("rank density is 0x%llx, ctlr density is 0x%llx\n", + rank_density, ctlr_density); + for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) { + switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + total_ctlr_mem = 2 * ctlr_density; + break; + default: + panic("Unknown interleaving mode"); + } + pinfo->common_timing_params[i].base_address = + current_mem_base; + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem = current_mem_base + total_ctlr_mem; + debug("ctrl %d base 0x%llx\n", i, current_mem_base); + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + } + } else { + /* + * Simple linear assignment if memory + * controllers are not interleaved. + */ + for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) { + total_ctlr_mem = 0; + pinfo->common_timing_params[i].base_address = + current_mem_base; + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + /* Compute DIMM base addresses. */ + unsigned long long cap = + pinfo->dimm_params[i][j].capacity; + pinfo->dimm_params[i][j].base_address = + current_mem_base; + debug("ctrl %d dimm %d base 0x%llx\n", + i, j, current_mem_base); + current_mem_base += cap; + total_ctlr_mem += cap; + } + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem += total_ctlr_mem; + } + } + debug("Total mem by %s is 0x%llx\n", __func__, total_mem); + + return total_mem; +} diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 68e2725..3bcda6d 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -275,6 +275,24 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR); break; + case 0x98: + /* XAUI in Slot1 and Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n", + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC1, + CONFIG_SYS_FM1_10GEC1_PHY_ADDR); + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; + case 0x9E: + /* XAUI in Slot2 */ + debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n", + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, + CONFIG_SYS_FM1_10GEC2_PHY_ADDR); + break; default: printf("Fman: Unsupported SerDes2 Protocol 0x%02x\n", serdes2_prtcl); @@ -300,6 +318,23 @@ int board_eth_init(bd_t *bis) } } + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + int idx = i - FM1_10GEC1; + + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + fm_info_set_mdio(i, + miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); + break; + default: + printf("Fman1: 10GSEC%u set to unknown interface %i\n", + idx + 1, fm_info_get_enet_if(i)); + fm_info_set_phy_address(i, 0); + break; + } + } + + cpu_eth_init(bis); #endif diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c index 4142e01..b26725b 100644 --- a/board/freescale/b4860qds/law.c +++ b/board/freescale/b4860qds/law.c @@ -33,8 +33,12 @@ struct law_entry law_table[] = { SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_MAPLE_MEM_PHYS + SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c index 6d634bf..29cc41b 100644 --- a/board/freescale/b4860qds/tlb.c +++ b/board/freescale/b4860qds/tlb.c @@ -106,7 +106,7 @@ struct fsl_e_tlb_entry tlb_table[] = { #ifdef CONFIG_SYS_DCSRBAR_PHYS SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_4M, 1), + 0, 10, BOOKE_PAGESZ_32M, 1), #endif #ifdef CONFIG_SYS_NAND_BASE /* diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index 8d914d5..2cf8738 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -78,7 +78,11 @@ struct qixis { u8 trig_stat; u8 res12[3]; u8 trig_ctr[4]; - u8 res13[48]; + u8 res13[16]; + u8 clk_freq[6]; /* Clock Measurement Registers */ + u8 res_c6[8]; + u8 clk_base[2]; /* Clock Frequency Base Reg */ + u8 res_d0[16]; u8 aux2[4]; /* Auxiliary Registers,0xE0 */ u8 res14[10]; u8 aux_ad; diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c index ef9de25..ae07073 100644 --- a/board/freescale/corenet_ds/eth_superhydra.c +++ b/board/freescale/corenet_ds/eth_superhydra.c @@ -605,8 +605,8 @@ int board_eth_init(bd_t *bis) lane = serdes_get_first_lane(XAUI_FM1); if (lane >= 0) { debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2; + mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2; super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO", mdio_mux[i].mask, mdio_mux[i].val); } @@ -704,8 +704,8 @@ int board_eth_init(bd_t *bis) lane = serdes_get_first_lane(XAUI_FM2); if (lane >= 0) { debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1; + mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; + mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1; super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO", mdio_mux[i].mask, mdio_mux[i].val); } diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg index 50806ca..af1ebd6 100644 --- a/board/freescale/corenet_ds/pbi.cfg +++ b/board/freescale/corenet_ds/pbi.cfg @@ -19,7 +19,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.pblimage for more details about how-to configure +# Refer doc/README.pblimage for more details about how-to configure # and create PBL boot image # diff --git a/board/freescale/corenet_ds/rcw_p5040ds.cfg b/board/freescale/corenet_ds/rcw_p5040ds.cfg new file mode 100644 index 0000000..82fa741 --- /dev/null +++ b/board/freescale/corenet_ds/rcw_p5040ds.cfg @@ -0,0 +1,11 @@ +# +# Default RCW for P5040DS. +# + +#PBL preamble and RCW header +aa55aa55 010e0100 +#64 bytes RCW data +0c580000 00000000 22121200 00000000 +089c4400 00283000 58000000 61000000 +00000000 00000000 00000000 10070000 +00000000 00000000 00000000 00000000 diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index 996d788..bae5c23 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg index c42a283..8cc8bde 100644 --- a/board/freescale/mx25pdk/imximage.cfg +++ b/board/freescale/mx25pdk/imximage.cfg @@ -15,7 +15,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg index 3e141ee..aaa490a 100644 --- a/board/freescale/mx51evk/imximage.cfg +++ b/board/freescale/mx51evk/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg index 4633e4d..a103d95 100644 --- a/board/freescale/mx53ard/imximage_dd3.cfg +++ b/board/freescale/mx53ard/imximage_dd3.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg index 1cd61d5..c1cfdda 100644 --- a/board/freescale/mx53evk/imximage.cfg +++ b/board/freescale/mx53evk/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg index e6b90c1..2f75ad0 100644 --- a/board/freescale/mx53loco/imximage.cfg +++ b/board/freescale/mx53loco/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg index 4633e4d..a103d95 100644 --- a/board/freescale/mx53smd/imximage.cfg +++ b/board/freescale/mx53smd/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index 4ed211e..6f18b37 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -20,7 +20,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg index bbff813..e720c6b 100644 --- a/board/freescale/mx6qsabreauto/imximage.cfg +++ b/board/freescale/mx6qsabreauto/imximage.cfg @@ -19,7 +19,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index a706a6d..44d3e0c 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -227,6 +227,17 @@ int misc_init_r(void) "'00' is unsupported\n"); else actual[i] = freq[i][clock]; + + /* + * PC board uses a different CPLD with PB board, this CPLD + * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB + * board has cpld_ver_sub = 0, and pcba_ver = 4. + */ + if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) && + (CPLD_READ(pcba_ver) == 5)) { + /* PC board bank2 frequency */ + actual[i] = freq[i-1][clock]; + } } for (i = 0; i < NUM_SRDS_BANKS; i++) { diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 692616a..058d625 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -19,6 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; struct board_specific_parameters { u32 n_ranks; u32 datarate_mhz_high; + u32 rank_gb; u32 clk_adjust; u32 wrlvl_start; u32 wrlvl_ctl_2; @@ -36,16 +37,19 @@ struct board_specific_parameters { static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 - * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, {} }; @@ -61,19 +65,19 @@ static const struct board_specific_parameters *udimms[] = { static const struct board_specific_parameters rdimm0[] = { /* * memory controller 0 - * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, - {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, {} }; @@ -113,7 +117,8 @@ void fsl_ddr_board_options(memctl_options_t *popts, */ ddr_freq = get_ddr_freq(0) / 1000000; while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { if (ddr_freq <= pbsp->datarate_mhz_high) { popts->cpo_override = pbsp->cpo; popts->write_data_delay = @@ -146,6 +151,13 @@ void fsl_ddr_board_options(memctl_options_t *popts, panic("DIMM is not supported by this board"); } found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index a49c7d4..7103a0d 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -52,7 +52,7 @@ #define EMI1_SLOT4 4 #define EMI1_SLOT5 5 #define EMI1_SLOT7 7 -#define EMI2 8 /* tmp, FIXME */ +#define EMI2 8 /* Slot6 and Slot8 do not have EMI connections */ static int mdio_mux[NUM_FM_PORTS]; @@ -71,6 +71,14 @@ static const char *mdio_names[] = { static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; +static u8 slot_qsgmii_phyaddr[5][4] = { + {0, 0, 0, 0},/* not used, to make index match slot No. */ + {0, 1, 2, 3}, + {4, 5, 6, 7}, + {8, 9, 0xa, 0xb}, + {0xc, 0xd, 0xe, 0xf}, +}; +static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0}; static const char *t4240qds_mdio_name_for_muxval(u8 muxval) { @@ -180,21 +188,228 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval) void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, enum fm_port port, int offset) { - if (mdio_mux[port] == EMI1_RGMII) - fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); - - /* TODO: will do with dts */ + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + switch (port) { + case FM1_DTSEC1: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy21"); + break; + case FM1_DTSEC2: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy22"); + break; + case FM1_DTSEC3: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy23"); + break; + case FM1_DTSEC4: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy24"); + break; + case FM1_DTSEC6: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy12"); + break; + case FM1_DTSEC9: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy14"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii4"); + break; + case FM1_DTSEC10: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy13"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii3"); + break; + case FM2_DTSEC1: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy41"); + break; + case FM2_DTSEC2: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy42"); + break; + case FM2_DTSEC3: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy43"); + break; + case FM2_DTSEC4: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy44"); + break; + case FM2_DTSEC6: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy32"); + break; + case FM2_DTSEC9: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy34"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii12"); + break; + case FM2_DTSEC10: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy33"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii11"); + break; + default: + break; + } + } } void fdt_fixup_board_enet(void *fdt) { - /* TODO: will do with dts */ + int i; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + + prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + switch (mdio_mux[i]) { + case EMI1_SLOT1: + fdt_status_okay_by_alias(fdt, "emi1_slot1"); + break; + case EMI1_SLOT2: + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + break; + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT4: + fdt_status_okay_by_alias(fdt, "emi1_slot4"); + break; + default: + break; + } + break; + case PHY_INTERFACE_MODE_XGMII: + /* check if it's XFI interface for 10g */ + if ((prtcl2 == 56) || (prtcl2 == 57)) { + fdt_status_okay_by_alias(fdt, "emi2_xfislot3"); + break; + } + switch (i) { + case FM1_10GEC1: + fdt_status_okay_by_alias(fdt, "emi2_xauislot1"); + break; + case FM1_10GEC2: + fdt_status_okay_by_alias(fdt, "emi2_xauislot2"); + break; + case FM2_10GEC1: + fdt_status_okay_by_alias(fdt, "emi2_xauislot3"); + break; + case FM2_10GEC2: + fdt_status_okay_by_alias(fdt, "emi2_xauislot4"); + break; + default: + break; + } + break; + default: + break; + } + } +} + +static void initialize_qsgmiiphy_fix(void) +{ + int i; + unsigned short reg; + + for (i = 1; i <= 4; i++) { + /* + * Try to read if a SGMII card is used, we do it slot by slot. + * if a SGMII PHY address is valid on a slot, then we mark + * all ports on the slot, then fix the PHY address for the + * marked port when doing dtb fixup. + */ + if (miiphy_read(mdio_names[i], + SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, ®) != 0) { + debug("Slot%d PHY ID register 2 read failed\n", i); + continue; + } + + debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg); + + if (reg == 0xFFFF) { + /* No physical device present at this address */ + continue; + } + + switch (i) { + case 1: + qsgmiiphy_fix[FM1_DTSEC5] = 1; + qsgmiiphy_fix[FM1_DTSEC6] = 1; + qsgmiiphy_fix[FM1_DTSEC9] = 1; + qsgmiiphy_fix[FM1_DTSEC10] = 1; + slot_qsgmii_phyaddr[1][0] = SGMII_CARD_PORT1_PHY_ADDR; + slot_qsgmii_phyaddr[1][1] = SGMII_CARD_PORT2_PHY_ADDR; + slot_qsgmii_phyaddr[1][2] = SGMII_CARD_PORT3_PHY_ADDR; + slot_qsgmii_phyaddr[1][3] = SGMII_CARD_PORT4_PHY_ADDR; + break; + case 2: + qsgmiiphy_fix[FM1_DTSEC1] = 1; + qsgmiiphy_fix[FM1_DTSEC2] = 1; + qsgmiiphy_fix[FM1_DTSEC3] = 1; + qsgmiiphy_fix[FM1_DTSEC4] = 1; + slot_qsgmii_phyaddr[2][0] = SGMII_CARD_PORT1_PHY_ADDR; + slot_qsgmii_phyaddr[2][1] = SGMII_CARD_PORT2_PHY_ADDR; + slot_qsgmii_phyaddr[2][2] = SGMII_CARD_PORT3_PHY_ADDR; + slot_qsgmii_phyaddr[2][3] = SGMII_CARD_PORT4_PHY_ADDR; + break; + case 3: + qsgmiiphy_fix[FM2_DTSEC5] = 1; + qsgmiiphy_fix[FM2_DTSEC6] = 1; + qsgmiiphy_fix[FM2_DTSEC9] = 1; + qsgmiiphy_fix[FM2_DTSEC10] = 1; + slot_qsgmii_phyaddr[3][0] = SGMII_CARD_PORT1_PHY_ADDR; + slot_qsgmii_phyaddr[3][1] = SGMII_CARD_PORT2_PHY_ADDR; + slot_qsgmii_phyaddr[3][2] = SGMII_CARD_PORT3_PHY_ADDR; + slot_qsgmii_phyaddr[3][3] = SGMII_CARD_PORT4_PHY_ADDR; + break; + case 4: + qsgmiiphy_fix[FM2_DTSEC1] = 1; + qsgmiiphy_fix[FM2_DTSEC2] = 1; + qsgmiiphy_fix[FM2_DTSEC3] = 1; + qsgmiiphy_fix[FM2_DTSEC4] = 1; + slot_qsgmii_phyaddr[4][0] = SGMII_CARD_PORT1_PHY_ADDR; + slot_qsgmii_phyaddr[4][1] = SGMII_CARD_PORT2_PHY_ADDR; + slot_qsgmii_phyaddr[4][2] = SGMII_CARD_PORT3_PHY_ADDR; + slot_qsgmii_phyaddr[4][3] = SGMII_CARD_PORT4_PHY_ADDR; + break; + default: + break; + } + } } int board_eth_init(bd_t *bis) { #if defined(CONFIG_FMAN_ENET) - int i; + int i, idx, lane, slot; struct memac_mdio_info dtsec_mdio_info; struct memac_mdio_info tgec_mdio_info; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -236,6 +451,7 @@ int board_eth_init(bd_t *bis) t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + initialize_qsgmiiphy_fix(); switch (srds_prtcl_s1) { case 1: @@ -248,44 +464,48 @@ int board_eth_init(bd_t *bis) case 28: case 36: /* SGMII in Slot1 and Slot2 */ - fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - SGMII_CARD_PORT4_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC10, - SGMII_CARD_PORT3_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } break; case 38: - fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - QSGMII_CARD_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC10, - QSGMII_CARD_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } break; case 40: case 46: case 48: - fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC10, - SGMII_CARD_PORT3_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC9, - SGMII_CARD_PORT4_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } - fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); break; default: puts("Invalid SerDes1 protocol for T4240QDS\n"); @@ -293,7 +513,7 @@ int board_eth_init(bd_t *bis) } for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1, lane, slot; + idx = i - FM1_DTSEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: lane = serdes_get_first_lane(FSL_SRDS_1, @@ -334,8 +554,16 @@ int board_eth_init(bd_t *bis) } for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + idx = i - FM1_10GEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + XAUI_FM1_MAC9 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); mdio_mux[i] = EMI2; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; @@ -344,7 +572,6 @@ int board_eth_init(bd_t *bis) } } - #if (CONFIG_SYS_NUM_FMAN == 2) switch (srds_prtcl_s2) { case 1: @@ -364,68 +591,64 @@ int board_eth_init(bd_t *bis) case 26: /* XAUI/HiGig in Slot3, SGMII in Slot4 */ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 28: case 36: /* SGMII in Slot3 and Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; case 38: /* QSGMII in Slot3 and Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; case 40: case 46: case 48: /* SGMII in Slot3 */ - fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); /* QSGMII in Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 50: case 52: case 54: fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 56: case 57: /* XFI in Slot3, SGMII in Slot4 */ - fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; default: puts("Invalid SerDes2 protocol for T4240QDS\n"); @@ -433,7 +656,7 @@ int board_eth_init(bd_t *bis) } for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1, lane, slot; + idx = i - FM2_DTSEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: lane = serdes_get_first_lane(FSL_SRDS_2, @@ -477,8 +700,16 @@ int board_eth_init(bd_t *bis) } for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + idx = i - FM2_10GEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: + lane = serdes_get_first_lane(FSL_SRDS_2, + XAUI_FM2_MAC9 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); mdio_mux[i] = EMI2; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c index 6f2c5c8..f3848f3 100644 --- a/board/freescale/t4qds/law.c +++ b/board/freescale/t4qds/law.c @@ -37,7 +37,8 @@ struct law_entry law_table[] = { #endif SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), #ifdef CONFIG_SYS_DCSRBAR_PHYS - SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), #endif #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h index efb718d..485353d 100644 --- a/board/freescale/t4qds/t4240qds_qixis.h +++ b/board/freescale/t4qds/t4240qds_qixis.h @@ -42,7 +42,7 @@ #define QIXIS_DDRCLK_125 0x2 #define QIXIS_DDRCLK_133 0x3 -#define BRDCFG5_RESET 0x00 +#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */ #define BRDCFG12_SD3EN_MASK 0x20 #define BRDCFG12_SD3MX_MASK 0x08 diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg new file mode 100644 index 0000000..c598fb5 --- /dev/null +++ b/board/freescale/t4qds/t4_pbi.cfg @@ -0,0 +1,36 @@ +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#512KB SRAM +09010100 00000000 +09010104 fff80009 +09010f00 08000000 +#enable CPC1 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff80000 +09000d08 81000012 +#workaround for IFC bus speed +091241c0 f03f3f3f +091241c4 ff003f3f +09124010 00000101 +09124130 0000000c +#workaround for SERDES A-006031 +090ea000 064740e6 +090ea020 064740e6 +090eb000 064740e6 +090eb020 064740e6 +090ec000 064740e6 +090ec020 064740e6 +090ed000 064740e6 +090ed020 064740e6 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg new file mode 100644 index 0000000..6ac95ff --- /dev/null +++ b/board/freescale/t4qds/t4_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +#serdes protocol 1_28_6_12 +14180019 0c101916 00000000 00000000 +04383060 30548c00 6c020000 19000000 +00000000 ee0000ee 00000000 000187fc +00000000 00000000 00000000 00000018 diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c index 3c95f3f..f0f280b 100644 --- a/board/freescale/t4qds/t4qds.c +++ b/board/freescale/t4qds/t4qds.c @@ -110,7 +110,7 @@ int checkboard(void) for (i = 0; i < MAX_SERDES; i++) { static const char *freq[] = { "100", "125", "156.25", "161.1328125"}; - unsigned int clock = (sw >> (2 * i)) & 3; + unsigned int clock = (sw >> (6 - 2 * i)) & 3; printf("SERDES%u=%sMHz ", i+1, freq[clock]); } @@ -132,6 +132,243 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +/* + * read_voltage from sensor on I2C bus + * We use average of 4 readings, waiting for 532us befor another reading + */ +#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */ +#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */ + +static inline int read_voltage(void) +{ + int i, ret, voltage_read = 0; + u16 vol_mon; + + for (i = 0; i < NUM_READINGS; i++) { + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2); + if (ret) { + printf("VID: failed to read core voltage\n"); + return ret; + } + if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) { + printf("VID: Core voltage sensor error\n"); + return -1; + } + debug("VID: bus voltage reads 0x%04x\n", vol_mon); + /* LSB = 4mv */ + voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4; + udelay(WAIT_FOR_ADC); + } + /* calculate the average */ + voltage_read /= NUM_READINGS; + + return voltage_read; +} + +/* + * We need to calculate how long before the voltage starts to drop or increase + * It returns with the loop count. Each loop takes several readings (532us) + */ +static inline int wait_for_voltage_change(int vdd_last) +{ + int timeout, vdd_current; + + vdd_current = read_voltage(); + /* wait until voltage starts to drop */ + for (timeout = 0; abs(vdd_last - vdd_current) <= 4 && + timeout < 100; timeout++) { + vdd_current = read_voltage(); + } + if (timeout >= 100) { + printf("VID: Voltage adjustment timeout\n"); + return -1; + } + return timeout; +} + +/* + * argument 'wait' is the time we know the voltage difference can be measured + * this function keeps reading the voltage until it is stable + */ +static inline int wait_for_voltage_stable(int wait) +{ + int timeout, vdd_current, vdd_last; + + vdd_last = read_voltage(); + udelay(wait * NUM_READINGS * WAIT_FOR_ADC); + /* wait until voltage is stable */ + vdd_current = read_voltage(); + for (timeout = 0; abs(vdd_last - vdd_current) >= 4 && + timeout < 100; timeout++) { + vdd_last = vdd_current; + udelay(wait * NUM_READINGS * WAIT_FOR_ADC); + vdd_current = read_voltage(); + } + if (timeout >= 100) { + printf("VID: Voltage adjustment timeout\n"); + return -1; + } + + return vdd_current; +} + +static inline int set_voltage(u8 vid) +{ + int wait, vdd_last; + + vdd_last = read_voltage(); + QIXIS_WRITE(brdcfg[6], vid); + wait = wait_for_voltage_change(vdd_last); + if (wait < 0) + return -1; + debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC); + wait = wait ? wait : 1; + + vdd_last = wait_for_voltage_stable(wait); + if (vdd_last < 0) + return -1; + debug("VID: Current voltage is %d mV\n", vdd_last); + + return vdd_last; +} + + +static int adjust_vdd(ulong vdd_override) +{ + int re_enable = disable_interrupts(); + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 fusesr; + u8 vid, vid_current; + int vdd_target, vdd_current, vdd_last; + int ret; + unsigned long vdd_string_override; + char *vdd_string; + static const uint16_t vdd[32] = { + 0, /* unused */ + 9875, /* 0.9875V */ + 9750, + 9625, + 9500, + 9375, + 9250, + 9125, + 9000, + 8875, + 8750, + 8625, + 8500, + 8375, + 8250, + 8125, + 10000, /* 1.0000V */ + 10125, + 10250, + 10375, + 10500, + 10625, + 10750, + 10875, + 11000, + 0, /* reserved */ + }; + struct vdd_drive { + u8 vid; + unsigned voltage; + }; + + ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR); + if (ret) { + debug("VID: I2c failed to switch channel\n"); + ret = -1; + goto exit; + } + + /* get the voltage ID from fuse status register */ + fusesr = in_be32(&gur->dcfg_fusesr); + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_VID_MASK; + if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) { + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; + } + vdd_target = vdd[vid]; + + /* check override variable for overriding VDD */ + vdd_string = getenv("t4240qds_vdd_mv"); + if (vdd_override == 0 && vdd_string && + !strict_strtoul(vdd_string, 10, &vdd_string_override)) + vdd_override = vdd_string_override; + if (vdd_override >= 819 && vdd_override <= 1212) { + vdd_target = vdd_override * 10; /* convert to 1/10 mV */ + debug("VDD override is %lu\n", vdd_override); + } else if (vdd_override != 0) { + printf("Invalid value.\n"); + } + + if (vdd_target == 0) { + debug("VID: VID not used\n"); + ret = 0; + goto exit; + } else { + /* round up and divice by 10 to get a value in mV */ + vdd_target = DIV_ROUND_UP(vdd_target, 10); + debug("VID: vid = %d mV\n", vdd_target); + } + + /* + * Check current board VID setting + * Voltage regulator support output to 6.250mv step + * The highes voltage allowed for this board is (vid=0x40) 1.21250V + * the lowest is (vid=0x7f) 0.81875V + */ + vid_current = QIXIS_READ(brdcfg[6]); + vdd_current = 121250 - (vid_current - 0x40) * 625; + debug("VID: Current vid setting is (0x%x) %d mV\n", + vid_current, vdd_current/100); + + /* + * Read voltage monitor to check real voltage. + * Voltage monitor LSB is 4mv. + */ + vdd_last = read_voltage(); + if (vdd_last < 0) { + printf("VID: Could not read voltage sensor abort VID adjustment\n"); + ret = -1; + goto exit; + } + debug("VID: Core voltage is at %d mV\n", vdd_last); + /* + * Adjust voltage to at or 8mV above target. + * Each step of adjustment is 6.25mV. + * Stepping down too fast may cause over current. + */ + while (vdd_last > 0 && vid_current < 0x80 && + vdd_last > (vdd_target + 8)) { + vid_current++; + vdd_last = set_voltage(vid_current); + } + /* + * Check if we need to step up + * This happens when board voltage switch was set too low + */ + while (vdd_last > 0 && vid_current >= 0x40 && + vdd_last < vdd_target + 2) { + vid_current--; + vdd_last = set_voltage(vid_current); + } + if (vdd_last > 0) + printf("VID: Core voltage %d mV\n", vdd_last); + else + ret = -1; + +exit: + if (re_enable) + enable_interrupts(); + return ret; +} + /* Configure Crossbar switches for Front-Side SerDes Ports */ int config_frontside_crossbar_vsc3316(void) { @@ -282,8 +519,15 @@ int board_early_init_r(void) setup_portals(); #endif - /* Disable remote I2C connectoin */ - QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET); + /* Disable remote I2C connection to qixis fpga */ + QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE); + + /* + * Adjust core voltage according to voltage ID + * This function changes I2C mux to channel 2. + */ + if (adjust_vdd(0)) + printf("Warning: Adjusting core voltage failed.\n"); /* Configure board SERDES ports crossbar */ config_frontside_crossbar_vsc3316(); @@ -296,6 +540,20 @@ int board_early_init_r(void) unsigned long get_board_sys_clk(void) { u8 sysclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[0]) << 8 | QIXIS_READ(clk_freq[1]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("SYS Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: SYS clock measurement is invalid, using value from brdcfg1.\n"); + } +#endif switch (sysclk_conf & 0x0F) { case QIXIS_SYSCLK_83: @@ -319,6 +577,20 @@ unsigned long get_board_sys_clk(void) unsigned long get_board_ddr_clk(void) { u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); +#ifdef CONFIG_FSL_QIXIS_CLOCK_MEASUREMENT + /* use accurate clock measurement */ + int freq = QIXIS_READ(clk_freq[2]) << 8 | QIXIS_READ(clk_freq[3]); + int base = QIXIS_READ(clk_base[0]) << 8 | QIXIS_READ(clk_base[1]); + u32 val; + + val = freq * base; + if (val) { + debug("DDR Clock measurement is: %d\n", val); + return val; + } else { + printf("Warning: DDR clock measurement is invalid, using value from brdcfg1.\n"); + } +#endif switch ((ddrclk_conf & 0x30) >> 4) { case QIXIS_DDRCLK_100: @@ -357,7 +629,7 @@ int misc_init_r(void) sw = QIXIS_READ(brdcfg[2]); for (i = 0; i < MAX_SERDES; i++) { - unsigned int clock = (sw >> (2 * i)) & 3; + unsigned int clock = (sw >> (6 - 2 * i)) & 3; switch (clock) { case 0: actual[i] = SRDS_PLLCR0_RFCK_SEL_100; @@ -414,6 +686,106 @@ void ft_board_setup(void *blob, bd_t *bd) } /* + * This function is called by bdinfo to print detail board information. + * As an exmaple for future board, we organize the messages into + * several sections. If applicable, the message is in the format of + * <name> = <value> + * It should aligned with normal output of bdinfo command. + * + * Voltage: Core, DDR and another configurable voltages + * Clock : Critical clocks which are not printed already + * RCW : RCW source if not printed already + * Misc : Other important information not in above catagories + */ +void board_detail(void) +{ + int i; + u8 brdcfg[16], dutcfg[16], rst_ctl; + int vdd, rcwsrc; + static const char * const clk[] = {"66.67", "100", "125", "133.33"}; + + for (i = 0; i < 16; i++) { + brdcfg[i] = qixis_read(offsetof(struct qixis, brdcfg[0]) + i); + dutcfg[i] = qixis_read(offsetof(struct qixis, dutcfg[0]) + i); + } + + /* Voltage secion */ + if (!select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR)) { + vdd = read_voltage(); + if (vdd > 0) + printf("Core voltage= %d mV\n", vdd); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + } + + printf("XVDD = 1.%d V\n", ((brdcfg[8] & 0xf) - 4) * 5 + 25); + + /* clock section */ + printf("SYSCLK = %s MHz\nDDRCLK = %s MHz\n", + clk[(brdcfg[11] >> 2) & 0x3], clk[brdcfg[11] & 3]); + + /* RCW section */ + rcwsrc = (dutcfg[0] << 1) + (dutcfg[1] & 1); + puts("RCW source = "); + switch (rcwsrc) { + case 0x017: + case 0x01f: + puts("8-bit NOR\n"); + break; + case 0x027: + case 0x02F: + puts("16-bit NOR\n"); + break; + case 0x040: + puts("SDHC/eMMC\n"); + break; + case 0x044: + puts("SPI 16-bit addressing\n"); + break; + case 0x045: + puts("SPI 24-bit addressing\n"); + break; + case 0x048: + puts("I2C normal addressing\n"); + break; + case 0x049: + puts("I2C extended addressing\n"); + break; + case 0x108: + case 0x109: + case 0x10a: + case 0x10b: + puts("8-bit NAND, 2KB\n"); + break; + default: + if ((rcwsrc >= 0x080) && (rcwsrc <= 0x09f)) + puts("Hard-coded RCW\n"); + else if ((rcwsrc >= 0x110) && (rcwsrc <= 0x11f)) + puts("8-bit NAND, 4KB\n"); + else + puts("unknown\n"); + break; + } + + /* Misc section */ + rst_ctl = QIXIS_READ(rst_ctl); + puts("HRESET_REQ = "); + switch (rst_ctl & 0x30) { + case 0x00: + puts("Ignored\n"); + break; + case 0x10: + puts("Assert HRESET\n"); + break; + case 0x30: + puts("Reset system\n"); + break; + default: + puts("N/A\n"); + break; + } +} + +/* * Reverse engineering switch settings. * Some bits cannot be figured out. They will be displayed as * underscore in binary format. mask[] has those bits. @@ -429,7 +801,7 @@ void qixis_dump_switch(void) * Any bit with 1 means that bit cannot be reverse engineered. * It will be displayed as _ in binary format. */ - static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xdf, 0x3f, 0x1f}; + static const u8 mask[] = {0, 0, 0, 0, 0, 0x1, 0xcf, 0x3f, 0x1f}; char buf[10]; u8 brdcfg[16], dutcfg[16]; @@ -460,7 +832,8 @@ void qixis_dump_switch(void) sw[5] = ((brdcfg[0] & 0x0f) << 4) | \ ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \ ((brdcfg[0] & 0x40) >> 5); - sw[6] = (brdcfg[11] & 0x20); + sw[6] = (brdcfg[11] & 0x20) | + ((brdcfg[5] & 0x02) << 3); sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \ ((brdcfg[5] & 0x10) << 2); sw[8] = ((brdcfg[12] & 0x08) << 4) | \ @@ -472,3 +845,23 @@ void qixis_dump_switch(void) i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); } } + +static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + ulong override; + + if (argc < 2) + return CMD_RET_USAGE; + if (!strict_strtoul(argv[1], 10, &override)) + adjust_vdd(override); /* the value is checked by callee */ + else + return CMD_RET_USAGE; + + return 0; +} + +U_BOOT_CMD( + vdd_override, 2, 0, do_vdd_adjust, + "Override VDD", + "- override with the voltage specified in mV, eg. 1050" +); diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c index 80eb511..92c01cf 100644 --- a/board/freescale/t4qds/tlb.c +++ b/board/freescale/t4qds/tlb.c @@ -115,7 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = { #ifdef CONFIG_SYS_DCSRBAR_PHYS SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 13, BOOKE_PAGESZ_4M, 1), + 0, 13, BOOKE_PAGESZ_32M, 1), #endif #ifdef CONFIG_SYS_NAND_BASE /* diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg index 21ff6d6..0173535 100644 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ b/board/genesi/mx51_efikamx/imximage_mx.cfg @@ -26,7 +26,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg index 7ddd0b1..5c46769 100644 --- a/board/genesi/mx51_efikamx/imximage_sb.cfg +++ b/board/genesi/mx51_efikamx/imximage_sb.cfg @@ -26,7 +26,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg index 4b64dab..1b66207 100644 --- a/board/iomega/iconnect/kwbimage.cfg +++ b/board/iomega/iconnect/kwbimage.cfg @@ -19,7 +19,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/karo/tk71/kwbimage.cfg b/board/karo/tk71/kwbimage.cfg index 0166826..9a9cf9d 100644 --- a/board/karo/tk71/kwbimage.cfg +++ b/board/karo/tk71/kwbimage.cfg @@ -24,7 +24,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg index 5aa0de2..63822a5 100644 --- a/board/keymile/km_arm/kwbimage-memphis.cfg +++ b/board/keymile/km_arm/kwbimage-memphis.cfg @@ -23,7 +23,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg index e5e9942..d941d7e 100644 --- a/board/keymile/km_arm/kwbimage.cfg +++ b/board/keymile/km_arm/kwbimage.cfg @@ -20,7 +20,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/keymile/km_arm/kwbimage_128M16_1.cfg b/board/keymile/km_arm/kwbimage_128M16_1.cfg index 5de8df7..4c31a0d 100644 --- a/board/keymile/km_arm/kwbimage_128M16_1.cfg +++ b/board/keymile/km_arm/kwbimage_128M16_1.cfg @@ -25,7 +25,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg index d0a09f6..31b9203 100644 --- a/board/keymile/km_arm/kwbimage_256M8_1.cfg +++ b/board/keymile/km_arm/kwbimage_256M8_1.cfg @@ -22,7 +22,7 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # # This configuration applies to COGE5 design (ARM-part) diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg index bade627..27a5e31 100644 --- a/board/raidsonic/ib62x0/kwbimage.cfg +++ b/board/raidsonic/ib62x0/kwbimage.cfg @@ -20,7 +20,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # -# Refer docs/README.kwimage for more details about how-to configure +# Refer doc/README.kwbimage for more details about how-to configure # and create kirkwood boot image # diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile deleted file mode 100644 index e1752e3..0000000 --- a/board/sorcery/Makefile +++ /dev/null @@ -1,44 +0,0 @@ -# -# (C) Copyright 2005-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := $(BOARD).o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg index c1de94f..64bddbb 100644 --- a/board/ttcontrol/vision2/imximage_hynix.cfg +++ b/board/ttcontrol/vision2/imximage_hynix.cfg @@ -23,7 +23,7 @@ * Foundation Inc. 51 Franklin Street Fifth Floor Boston, * MA 02110-1301 USA * - * Refer docs/README.imxmage for more details about how-to configure + * Refer doc/README.imximage for more details about how-to configure * and create imximage boot image * * The syntax is taken as close as possible with the kwbimage diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index befbb3a..2f5f20e 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -31,12 +31,17 @@ #include <asm/processor.h> #include <asm/microblaze_intc.h> #include <asm/asm.h> +#include <asm/gpio.h> + +#ifdef CONFIG_XILINX_GPIO +static int reset_pin = -1; +#endif int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = - ++(*((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR))); +#ifdef CONFIG_XILINX_GPIO + if (reset_pin != -1) + gpio_direction_output(reset_pin, 1); #endif #ifdef CONFIG_XILINX_TB_WATCHDOG @@ -52,8 +57,10 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int gpio_init (void) { -#ifdef CONFIG_SYS_GPIO_0 - *((unsigned long *)(CONFIG_SYS_GPIO_0_ADDR)) = 0xFFFFFFFF; +#ifdef CONFIG_XILINX_GPIO + reset_pin = gpio_alloc(CONFIG_SYS_GPIO_0_ADDR, "reset", 1); + if (reset_pin != -1) + gpio_request(reset_pin, "reset_pin"); #endif return 0; } @@ -602,9 +602,6 @@ TQM5200_B_HIGHBOOT powerpc mpc5xxx tqm5200 tqc TQM5200S powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S TQM5200S_HIGHBOOT powerpc mpc5xxx tqm5200 tqc - TQM5200:TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000 TQM5200_STK100 powerpc mpc5xxx tqm5200 tqc - TQM5200:STK52XX_REV100 -Alaska8220 powerpc mpc8220 alaska -sorcery powerpc mpc8220 -Yukon8220 powerpc mpc8220 alaska A3000 powerpc mpc824x a3000 CPC45 powerpc mpc824x cpc45 - - CPC45 CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM @@ -897,6 +894,9 @@ P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freesca P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 P5020DS_SRIO_PCIE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 P5040DS powerpc mpc85xx corenet_ds freescale +P5040DS_NAND powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 +P5040DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +P5040DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5040DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freescale - BSC9131RDB:BSC9131RDB,SPIFLASH BSC9132QDS_NOR_DDRCLK100 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_100 BSC9132QDS_NOR_DDRCLK133 powerpc mpc85xx bsc9132qds freescale - BSC9132QDS:BSC9132QDS,SYS_CLK_100_DDR_133 @@ -907,9 +907,12 @@ BSC9132QDS_SPIFLASH_DDRCLK133 powerpc mpc85xx bsc9132qds freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M -T4240QDS powerpc mpc85xx t4qds freescale -T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 -T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240 +T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +T4160QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160 +T4160QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4160QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 B4860QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860 B4860QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 B4860QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 diff --git a/common/Makefile b/common/Makefile index 1cfb132..3ba4316 100644 --- a/common/Makefile +++ b/common/Makefile @@ -165,6 +165,7 @@ COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o COBJS-$(CONFIG_CMD_SHA1SUM) += cmd_sha1sum.o COBJS-$(CONFIG_CMD_SETEXPR) += cmd_setexpr.o +COBJS-$(CONFIG_CMD_SOFTSWITCH) += cmd_softswitch.o COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o COBJS-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o @@ -231,6 +232,8 @@ COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o COBJS-y += console.o COBJS-y += dlmalloc.o COBJS-y += image.o +COBJS-$(CONFIG_OF_LIBFDT) += image-fdt.o +COBJS-$(CONFIG_FIT) += image-fit.o COBJS-y += memsize.o COBJS-y += stdio.o diff --git a/common/board_f.c b/common/board_f.c index 32e59fa..81edbdf 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -667,27 +667,6 @@ static int setup_board_part1(void) #if defined(CONFIG_MPC83xx) bd->bi_immrbar = CONFIG_SYS_IMMR; #endif -#if defined(CONFIG_MPC8220) - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ - bd->bi_inpfreq = gd->arch.inp_clk; - bd->bi_pcifreq = gd->pci_clk; - bd->bi_vcofreq = gd->arch.vco_clk; - bd->bi_pevfreq = gd->arch.pev_clk; - bd->bi_flbfreq = gd->arch.flb_clk; - - /* store bootparam to sram (backward compatible), here? */ - { - u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE; - - *sram++ = gd->ram_size; - *sram++ = gd->bus_clk; - *sram++ = gd->arch.inp_clk; - *sram++ = gd->cpu_clk; - *sram++ = gd->arch.vco_clk; - *sram++ = gd->arch.flb_clk; - *sram++ = 0xb8c3ba11; /* boot signature */ - } -#endif return 0; } @@ -921,9 +900,6 @@ static init_fnc_t init_sequence_f[] = { #if defined(CONFIG_MPC5xxx) prt_mpc5xxx_clks, #endif /* CONFIG_MPC5xxx */ -#if defined(CONFIG_MPC8220) - prt_mpc8220_clks, -#endif #if defined(CONFIG_DISPLAY_BOARDINFO) checkboard, /* display board info */ #endif diff --git a/common/board_r.c b/common/board_r.c index f801e41..fd1fd31 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -765,6 +765,7 @@ init_fnc_t init_sequence_r[] = { #endif initr_barrier, initr_malloc, + bootstage_relocate, #ifdef CONFIG_ARCH_EARLY_INIT_R arch_early_init_r, #endif diff --git a/common/bootstage.c b/common/bootstage.c index a1e0939..c5c6996 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -30,6 +30,8 @@ #include <common.h> #include <libfdt.h> +#include <malloc.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -56,6 +58,21 @@ struct bootstage_hdr { uint32_t magic; /* Unused */ }; +int bootstage_relocate(void) +{ + int i; + + /* + * Duplicate all strings. They may point to an old location in the + * program .text section that can eventually get trashed. + */ + for (i = 0; i < BOOTSTAGE_ID_COUNT; i++) + if (record[i].name) + record[i].name = strdup(record[i].name); + + return 0; +} + ulong bootstage_add_record(enum bootstage_id id, const char *name, int flags, ulong mark) { @@ -102,6 +119,33 @@ ulong bootstage_mark_name(enum bootstage_id id, const char *name) return bootstage_add_record(id, name, flags, timer_get_boot_us()); } +ulong bootstage_mark_code(const char *file, const char *func, int linenum) +{ + char *str, *p; + __maybe_unused char *end; + int len = 0; + + /* First work out the length we need to allocate */ + if (linenum != -1) + len = 11; + if (func) + len += strlen(func); + if (file) + len += strlen(file); + + str = malloc(len + 1); + p = str; + end = p + len; + if (file) + p += snprintf(p, end - p, "%s,", file); + if (linenum != -1) + p += snprintf(p, end - p, "%d", linenum); + if (func) + p += snprintf(p, end - p, ": %s", func); + + return bootstage_mark_name(BOOTSTAGE_ID_ALLOC, str); +} + uint32_t bootstage_start(enum bootstage_id id, const char *name) { struct bootstage_record *rec = &record[id]; diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 85279d5..17dc961 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -84,6 +84,10 @@ static void print_mhz(const char *name, unsigned long hz) } #if defined(CONFIG_PPC) +void __weak board_detail(void) +{ + /* Please define boot_detail() for your platform */ +} int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -130,13 +134,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif print_mhz("busfreq", bd->bi_busfreq); #endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ -#if defined(CONFIG_MPC8220) - print_mhz("inpfreq", bd->bi_inpfreq); - print_mhz("flbfreq", bd->bi_flbfreq); - print_mhz("pcifreq", bd->bi_pcifreq); - print_mhz("vcofreq", bd->bi_vcofreq); - print_mhz("pevfreq", bd->bi_pevfreq); -#endif #ifdef CONFIG_ENABLE_36BIT_PHYS #ifdef CONFIG_PHYS_64BIT @@ -169,6 +166,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("IP addr = %s\n", getenv("ipaddr")); printf("baudrate = %6u bps\n", bd->bi_baudrate); print_num("relocaddr", gd->relocaddr); + board_detail(); return 0; } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 7438469..15f4599 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -36,6 +36,7 @@ #include <lmb.h> #include <linux/ctype.h> #include <asm/byteorder.h> +#include <asm/io.h> #include <linux/compiler.h> #if defined(CONFIG_CMD_USB) @@ -97,7 +98,7 @@ static image_header_t *image_get_kernel(ulong img_addr, int verify); static int fit_check_kernel(const void *fit, int os_noffset, int verify); #endif -static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, +static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], bootm_headers_t *images, ulong *os_data, ulong *os_len); @@ -203,8 +204,8 @@ static inline void boot_start_lmb(bootm_headers_t *images) { } static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - void *os_hdr; - int ret; + const void *os_hdr; + int ret; memset((void *)&images, 0, sizeof(images)); images.verify = getenv_yesno("verify"); @@ -275,7 +276,7 @@ static int bootm_start(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] #if defined(CONFIG_FIT) } else if (images.fit_uname_os) { ret = fit_image_get_entry(images.fit_hdr_os, - images.fit_noffset_os, &images.ep); + images.fit_noffset_os, &images.ep); if (ret) { puts("Can't get entry point property!\n"); return 1; @@ -815,7 +816,7 @@ static int fit_check_kernel(const void *fit, int os_noffset, int verify) if (verify) { puts(" Verifying Hash Integrity ... "); - if (!fit_image_check_hashes(fit, os_noffset)) { + if (!fit_image_verify(fit, os_noffset)) { puts("Bad Data Hash\n"); bootstage_error(BOOTSTAGE_ID_FIT_CHECK_HASH); return 0; @@ -855,14 +856,15 @@ static int fit_check_kernel(const void *fit, int os_noffset, int verify) * pointer to image header if valid image was found, plus kernel start * address and length, otherwise NULL */ -static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, +static const void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], bootm_headers_t *images, ulong *os_data, ulong *os_len) { image_header_t *hdr; ulong img_addr; + const void *buf; #if defined(CONFIG_FIT) - void *fit_hdr; + const void *fit_hdr; const char *fit_uname_config = NULL; const char *fit_uname_kernel = NULL; const void *data; @@ -898,7 +900,8 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, /* check image type, for FIT images get FIT kernel node */ *os_data = *os_len = 0; - switch (genimg_get_format((void *)img_addr)) { + buf = map_sysmem(img_addr, 0); + switch (genimg_get_format(buf)) { case IMAGE_FORMAT_LEGACY: printf("## Booting kernel from Legacy Image at %08lx ...\n", img_addr); @@ -943,7 +946,7 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, break; #if defined(CONFIG_FIT) case IMAGE_FORMAT_FIT: - fit_hdr = (void *)img_addr; + fit_hdr = buf; printf("## Booting kernel from FIT Image at %08lx ...\n", img_addr); @@ -1020,7 +1023,7 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, *os_len = len; *os_data = (ulong)data; - images->fit_hdr_os = fit_hdr; + images->fit_hdr_os = (void *)fit_hdr; images->fit_uname_os = fit_uname_kernel; images->fit_noffset_os = os_noffset; break; @@ -1034,7 +1037,7 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, debug(" kernel data at 0x%08lx, len = 0x%08lx (%ld)\n", *os_data, *os_len, *os_len); - return (void *)img_addr; + return buf; } #ifdef CONFIG_SYS_LONGHELP @@ -1169,7 +1172,7 @@ static int image_info(ulong addr) fit_print_contents(hdr); - if (!fit_all_image_check_hashes(hdr)) { + if (!fit_all_image_verify(hdr)) { puts("Bad hash in FIT image!\n"); return 1; } @@ -1420,9 +1423,14 @@ U_BOOT_CMD( /* helper routines */ /*******************************************************************/ #if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) + +#define CONSOLE_ARG "console=" +#define CONSOLE_ARG_LEN (sizeof(CONSOLE_ARG) - 1) + static void fixup_silent_linux(void) { - char buf[256], *start, *end; + char *buf; + const char *env_val; char *cmdline = getenv("bootargs"); /* Only fix cmdline when requested */ @@ -1430,25 +1438,37 @@ static void fixup_silent_linux(void) return; debug("before silent fix-up: %s\n", cmdline); - if (cmdline) { - start = strstr(cmdline, "console="); + if (cmdline && (cmdline[0] != '\0')) { + char *start = strstr(cmdline, CONSOLE_ARG); + + /* Allocate space for maximum possible new command line */ + buf = malloc(strlen(cmdline) + 1 + CONSOLE_ARG_LEN + 1); + if (!buf) { + debug("%s: out of memory\n", __func__); + return; + } + if (start) { - end = strchr(start, ' '); - strncpy(buf, cmdline, (start - cmdline + 8)); + char *end = strchr(start, ' '); + int num_start_bytes = start - cmdline + CONSOLE_ARG_LEN; + + strncpy(buf, cmdline, num_start_bytes); if (end) - strcpy(buf + (start - cmdline + 8), end); + strcpy(buf + num_start_bytes, end); else - buf[start - cmdline + 8] = '\0'; + buf[num_start_bytes] = '\0'; } else { - strcpy(buf, cmdline); - strcat(buf, " console="); + sprintf(buf, "%s %s", cmdline, CONSOLE_ARG); } + env_val = buf; } else { - strcpy(buf, "console="); + buf = NULL; + env_val = CONSOLE_ARG; } - setenv("bootargs", buf); - debug("after silent fix-up: %s\n", buf); + setenv("bootargs", env_val); + debug("after silent fix-up: %s\n", env_val); + free(buf); } #endif /* CONFIG_SILENT_CONSOLE */ diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 5e1d037..3cd1b13 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -210,8 +210,8 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } /* verify integrity */ - if (!fit_image_check_hashes(fit_hdr, noffset)) { - puts("Bad Data Hash\n"); + if (!fit_image_verify(fit_hdr, noffset)) { + puts ("Bad Data Hash\n"); return 1; } diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 64dd76a..6df00b1 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -445,7 +445,7 @@ static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif bytes = size * count; - buf = map_sysmem(addr, bytes); + buf = map_sysmem(dest, bytes); src = map_sysmem(addr, bytes); while (count-- > 0) { if (size == 4) diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index f8dc38e..2478c95 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -314,7 +314,7 @@ int setenv(const char *varname, const char *varvalue) /** * Set an environment variable to an integer value * - * @param varname Environmet variable to set + * @param varname Environment variable to set * @param value Value to set it to * @return 0 if ok, 1 on error */ @@ -329,7 +329,7 @@ int setenv_ulong(const char *varname, ulong value) /** * Set an environment variable to an value in hex * - * @param varname Environmet variable to set + * @param varname Environment variable to set * @param value Value to set it to * @return 0 if ok, 1 on error */ diff --git a/common/cmd_softswitch.c b/common/cmd_softswitch.c new file mode 100644 index 0000000..f75d926 --- /dev/null +++ b/common/cmd_softswitch.c @@ -0,0 +1,41 @@ +/* + * cmd_softswitch.c - set the softswitch for bf60x + * + * Copyright (c) 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/soft_switch.h> + +int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int switchaddr, value, pin, port; + + if (argc != 5) + return CMD_RET_USAGE; + + if (strcmp(argv[2], "GPA") == 0) + port = IO_PORT_A; + else if (strcmp(argv[2], "GPB") == 0) + port = IO_PORT_B; + else + return CMD_RET_USAGE; + + switchaddr = simple_strtoul(argv[1], NULL, 16); + pin = simple_strtoul(argv[3], NULL, 16); + value = simple_strtoul(argv[4], NULL, 16); + + config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value); + + return 0; +} + +U_BOOT_CMD( + softswitch_output, 5, 1, do_softswitch, + "switchaddr GPA/GPB pin_offset value", + "" +); diff --git a/common/cmd_source.c b/common/cmd_source.c index f0d7f52..a440614 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -127,7 +127,7 @@ source (ulong addr, const char *fit_uname) /* verify integrity */ if (verify) { - if (!fit_image_check_hashes (fit_hdr, noffset)) { + if (!fit_image_verify(fit_hdr, noffset)) { puts ("Bad Data Hash\n"); return 1; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index dacdc2d..70e803b 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -269,14 +269,42 @@ static void usb_display_config(struct usb_device *dev) printf("\n"); } +static struct usb_device *usb_find_device(int devnum) +{ + struct usb_device *dev; + int d; + + for (d = 0; d < USB_MAX_DEVICE; d++) { + dev = usb_get_dev_index(d); + if (dev == NULL) + return NULL; + if (dev->devnum == devnum) + return dev; + } + + return NULL; +} + static inline char *portspeed(int speed) { - if (speed == USB_SPEED_HIGH) - return "480 Mb/s"; - else if (speed == USB_SPEED_LOW) - return "1.5 Mb/s"; - else - return "12 Mb/s"; + char *speed_str; + + switch (speed) { + case USB_SPEED_SUPER: + speed_str = "5 Gb/s"; + break; + case USB_SPEED_HIGH: + speed_str = "480 Mb/s"; + break; + case USB_SPEED_LOW: + speed_str = "1.5 Mb/s"; + break; + default: + speed_str = "12 Mb/s"; + break; + } + + return speed_str; } /* shows the device tree recursively */ @@ -348,6 +376,66 @@ static void usb_show_tree(struct usb_device *dev) usb_show_tree_graph(dev, &preamble[0]); } +static int usb_test(struct usb_device *dev, int port, char* arg) +{ + int mode; + + if (port > dev->maxchild) { + printf("Device is no hub or does not have %d ports.\n", port); + return 1; + } + + switch (arg[0]) { + case 'J': + case 'j': + printf("Setting Test_J mode"); + mode = USB_TEST_MODE_J; + break; + case 'K': + case 'k': + printf("Setting Test_K mode"); + mode = USB_TEST_MODE_K; + break; + case 'S': + case 's': + printf("Setting Test_SE0_NAK mode"); + mode = USB_TEST_MODE_SE0_NAK; + break; + case 'P': + case 'p': + printf("Setting Test_Packet mode"); + mode = USB_TEST_MODE_PACKET; + break; + case 'F': + case 'f': + printf("Setting Test_Force_Enable mode"); + mode = USB_TEST_MODE_FORCE_ENABLE; + break; + default: + printf("Unrecognized test mode: %s\nAvailable modes: " + "J, K, S[E0_NAK], P[acket], F[orce_Enable]\n", arg); + return 1; + } + + if (port) + printf(" on downstream facing port %d...\n", port); + else + printf(" on upstream facing port...\n"); + + if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_FEATURE, + port ? USB_RT_PORT : USB_RECIP_DEVICE, + port ? USB_PORT_FEAT_TEST : USB_FEAT_TEST, + (mode << 8) | port, + NULL, 0, USB_CNTL_TIMEOUT) == -1) { + printf("Error during SET_FEATURE.\n"); + return 1; + } else { + printf("Test mode successfully set. Use 'usb start' " + "to return to normal operation.\n"); + return 0; + } +} + /****************************************************************************** * usb boot command intepreter. Derived from diskboot @@ -441,17 +529,9 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } else { - int d; - - i = simple_strtoul(argv[2], NULL, 16); + i = simple_strtoul(argv[2], NULL, 10); printf("config for device %d\n", i); - for (d = 0; d < USB_MAX_DEVICE; d++) { - dev = usb_get_dev_index(d); - if (dev == NULL) - break; - if (dev->devnum == i) - break; - } + dev = usb_find_device(i); if (dev == NULL) { printf("*** No device available ***\n"); return 0; @@ -462,6 +542,18 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } return 0; } + if (strncmp(argv[1], "test", 4) == 0) { + if (argc < 5) + return CMD_RET_USAGE; + i = simple_strtoul(argv[2], NULL, 10); + dev = usb_find_device(i); + if (dev == NULL) { + printf("Device %d does not exist.\n", i); + return 1; + } + i = simple_strtoul(argv[3], NULL, 10); + return usb_test(dev, i, argv[4]); + } #ifdef CONFIG_USB_STORAGE if (strncmp(argv[1], "stor", 4) == 0) return usb_stor_info(); @@ -571,7 +663,6 @@ static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } -#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usb, 5, 1, do_usb, "USB sub-system", @@ -580,30 +671,26 @@ U_BOOT_CMD( "usb stop [f] - stop USB [f]=force stop\n" "usb tree - show USB device tree\n" "usb info [dev] - show available USB devices\n" + "usb test [dev] [port] [mode] - set USB 2.0 test mode\n" + " (specify port 0 to indicate the device's upstream port)\n" + " Available modes: J, K, S[E0_NAK], P[acket], F[orce_Enable]\n" +#ifdef CONFIG_USB_STORAGE "usb storage - show details of USB storage devices\n" "usb dev [dev] - show or set current USB storage device\n" "usb part [dev] - print partition table of one or all USB storage" - " devices\n" + " devices\n" "usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" " to memory address `addr'\n" "usb write addr blk# cnt - write `cnt' blocks starting at block `blk#'\n" " from memory address `addr'" +#endif /* CONFIG_USB_STORAGE */ ); +#ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usbboot, 3, 1, do_usbboot, "boot from USB device", "loadAddr dev:part" ); - -#else -U_BOOT_CMD( - usb, 5, 1, do_usb, - "USB sub-system", - "start - start (scan) USB controller\n" - "usb reset - reset (rescan) USB controller\n" - "usb tree - show USB device tree\n" - "usb info [dev] - show available USB devices" -); -#endif +#endif /* CONFIG_USB_STORAGE */ diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index ea0a26e..270e803 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -58,7 +58,9 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) const void *fit_data; size_t fit_len; #endif +#ifdef CONFIG_GZIP uint unc_len = CONFIG_SYS_XIMG_LEN; +#endif uint8_t comp; verify = getenv_yesno("verify"); @@ -160,7 +162,7 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) /* verify integrity */ if (verify) { - if (!fit_image_check_hashes(fit_hdr, noffset)) { + if (!fit_image_verify(fit_hdr, noffset)) { puts("Bad Data Hash\n"); return 1; } diff --git a/common/fdt_support.c b/common/fdt_support.c index 812acb4..416100e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -387,7 +387,11 @@ static void write_cell(u8 *addr, u64 val, int size) } } +#ifdef CONFIG_NR_DRAM_BANKS +#define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS +#else #define MEMORY_BANKS_MAX 4 +#endif int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks) { int err, nodeoffset; diff --git a/common/hash.c b/common/hash.c index c9ac33e..fe19b73 100644 --- a/common/hash.c +++ b/common/hash.c @@ -30,6 +30,7 @@ #include <sha1.h> #include <sha256.h> #include <asm/io.h> +#include <asm/errno.h> /* * These are the hash algorithms we support. Chips which support accelerated @@ -238,6 +239,28 @@ static void show_hash(struct hash_algo *algo, ulong addr, ulong len, printf("%02x", output[i]); } +int hash_block(const char *algo_name, const void *data, unsigned int len, + uint8_t *output, int *output_size) +{ + struct hash_algo *algo; + + algo = find_hash_algo(algo_name); + if (!algo) { + debug("Unknown hash algorithm '%s'\n", algo_name); + return -EPROTONOSUPPORT; + } + if (output_size && *output_size < algo->digest_size) { + debug("Output buffer size %d too small (need %d bytes)", + *output_size, algo->digest_size); + return -ENOSPC; + } + if (output_size) + *output_size = algo->digest_size; + algo->hash_func_ws(data, len, output, algo->chunk_size); + + return 0; +} + int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { diff --git a/common/image-fdt.c b/common/image-fdt.c new file mode 100644 index 0000000..158c9cf --- /dev/null +++ b/common/image-fdt.c @@ -0,0 +1,653 @@ +/* + * Copyright (c) 2013, Google Inc. + * + * (C) Copyright 2008 Semihalf + * + * (C) Copyright 2000-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdt_support.h> +#include <errno.h> +#include <image.h> +#include <libfdt.h> +#include <asm/io.h> + +#ifndef CONFIG_SYS_FDT_PAD +#define CONFIG_SYS_FDT_PAD 0x3000 +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void fdt_error(const char *msg) +{ + puts("ERROR: "); + puts(msg); + puts(" - must RESET the board to recover.\n"); +} + +static const image_header_t *image_get_fdt(ulong fdt_addr) +{ + const image_header_t *fdt_hdr = map_sysmem(fdt_addr, 0); + + image_print_contents(fdt_hdr); + + puts(" Verifying Checksum ... "); + if (!image_check_hcrc(fdt_hdr)) { + fdt_error("fdt header checksum invalid"); + return NULL; + } + + if (!image_check_dcrc(fdt_hdr)) { + fdt_error("fdt checksum invalid"); + return NULL; + } + puts("OK\n"); + + if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) { + fdt_error("uImage is not a fdt"); + return NULL; + } + if (image_get_comp(fdt_hdr) != IH_COMP_NONE) { + fdt_error("uImage is compressed"); + return NULL; + } + if (fdt_check_header((char *)image_get_data(fdt_hdr)) != 0) { + fdt_error("uImage data is not a fdt"); + return NULL; + } + return fdt_hdr; +} + +/** + * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable + * @lmb: pointer to lmb handle, will be used for memory mgmt + * @fdt_blob: pointer to fdt blob base address + * + * Adds the memreserve regions in the dtb to the lmb block. Adding the + * memreserve regions prevents u-boot from using them to store the initrd + * or the fdt blob. + */ +void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) +{ + uint64_t addr, size; + int i, total; + + if (fdt_check_header(fdt_blob) != 0) + return; + + total = fdt_num_mem_rsv(fdt_blob); + for (i = 0; i < total; i++) { + if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) + continue; + printf(" reserving fdt memory region: addr=%llx size=%llx\n", + (unsigned long long)addr, (unsigned long long)size); + lmb_reserve(lmb, addr, size); + } +} + +/** + * boot_relocate_fdt - relocate flat device tree + * @lmb: pointer to lmb handle, will be used for memory mgmt + * @of_flat_tree: pointer to a char* variable, will hold fdt start address + * @of_size: pointer to a ulong variable, will hold fdt length + * + * boot_relocate_fdt() allocates a region of memory within the bootmap and + * relocates the of_flat_tree into that region, even if the fdt is already in + * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD + * bytes. + * + * of_flat_tree and of_size are set to final (after relocation) values + * + * returns: + * 0 - success + * 1 - failure + */ +int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) +{ + void *fdt_blob = *of_flat_tree; + void *of_start = NULL; + char *fdt_high; + ulong of_len = 0; + int err; + int disable_relocation = 0; + + /* nothing to do */ + if (*of_size == 0) + return 0; + + if (fdt_check_header(fdt_blob) != 0) { + fdt_error("image is not a fdt"); + goto error; + } + + /* position on a 4K boundary before the alloc_current */ + /* Pad the FDT by a specified amount */ + of_len = *of_size + CONFIG_SYS_FDT_PAD; + + /* If fdt_high is set use it to select the relocation address */ + fdt_high = getenv("fdt_high"); + if (fdt_high) { + void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16); + + if (((ulong) desired_addr) == ~0UL) { + /* All ones means use fdt in place */ + of_start = fdt_blob; + lmb_reserve(lmb, (ulong)of_start, of_len); + disable_relocation = 1; + } else if (desired_addr) { + of_start = + (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, + (ulong)desired_addr); + if (of_start == NULL) { + puts("Failed using fdt_high value for Device Tree"); + goto error; + } + } else { + of_start = + (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000); + } + } else { + of_start = + (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, + getenv_bootm_mapsize() + + getenv_bootm_low()); + } + + if (of_start == NULL) { + puts("device tree - allocation error\n"); + goto error; + } + + if (disable_relocation) { + /* + * We assume there is space after the existing fdt to use + * for padding + */ + fdt_set_totalsize(of_start, of_len); + printf(" Using Device Tree in place at %p, end %p\n", + of_start, of_start + of_len - 1); + } else { + debug("## device tree at %p ... %p (len=%ld [0x%lX])\n", + fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); + + printf(" Loading Device Tree to %p, end %p ... ", + of_start, of_start + of_len - 1); + + err = fdt_open_into(fdt_blob, of_start, of_len); + if (err != 0) { + fdt_error("fdt move failed"); + goto error; + } + puts("OK\n"); + } + + *of_flat_tree = of_start; + *of_size = of_len; + + set_working_fdt_addr(*of_flat_tree); + return 0; + +error: + return 1; +} + +#if defined(CONFIG_FIT) +/** + * fit_check_fdt - verify FIT format FDT subimage + * @fit_hdr: pointer to the FIT header + * fdt_noffset: FDT subimage node offset within FIT image + * @verify: data CRC verification flag + * + * fit_check_fdt() verifies integrity of the FDT subimage and from + * specified FIT image. + * + * returns: + * 1, on success + * 0, on failure + */ +static int fit_check_fdt(const void *fit, int fdt_noffset, int verify) +{ + fit_image_print(fit, fdt_noffset, " "); + + if (verify) { + puts(" Verifying Hash Integrity ... "); + if (!fit_image_verify(fit, fdt_noffset)) { + fdt_error("Bad Data Hash"); + return 0; + } + puts("OK\n"); + } + + if (!fit_image_check_type(fit, fdt_noffset, IH_TYPE_FLATDT)) { + fdt_error("Not a FDT image"); + return 0; + } + + if (!fit_image_check_comp(fit, fdt_noffset, IH_COMP_NONE)) { + fdt_error("FDT image is compressed"); + return 0; + } + + return 1; +} +#endif + +/** + * boot_get_fdt - main fdt handling routine + * @argc: command argument count + * @argv: command argument list + * @images: pointer to the bootm images structure + * @of_flat_tree: pointer to a char* variable, will hold fdt start address + * @of_size: pointer to a ulong variable, will hold fdt length + * + * boot_get_fdt() is responsible for finding a valid flat device tree image. + * Curently supported are the following ramdisk sources: + * - multicomponent kernel/ramdisk image, + * - commandline provided address of decicated ramdisk image. + * + * returns: + * 0, if fdt image was found and valid, or skipped + * of_flat_tree and of_size are set to fdt start address and length if + * fdt image is found and valid + * + * 1, if fdt image is found but corrupted + * of_flat_tree and of_size are set to 0 if no fdt exists + */ +int boot_get_fdt(int flag, int argc, char * const argv[], + bootm_headers_t *images, char **of_flat_tree, ulong *of_size) +{ + const image_header_t *fdt_hdr; + ulong fdt_addr; + char *fdt_blob = NULL; + ulong image_start, image_data, image_end; + ulong load_start, load_end; + void *buf; +#if defined(CONFIG_FIT) + void *fit_hdr; + const char *fit_uname_config = NULL; + const char *fit_uname_fdt = NULL; + ulong default_addr; + int cfg_noffset; + int fdt_noffset; + const void *data; + size_t size; +#endif + + *of_flat_tree = NULL; + *of_size = 0; + + if (argc > 3 || genimg_has_config(images)) { +#if defined(CONFIG_FIT) + if (argc > 3) { + /* + * If the FDT blob comes from the FIT image and the + * FIT image address is omitted in the command line + * argument, try to use ramdisk or os FIT image + * address or default load address. + */ + if (images->fit_uname_rd) + default_addr = (ulong)images->fit_hdr_rd; + else if (images->fit_uname_os) + default_addr = (ulong)images->fit_hdr_os; + else + default_addr = load_addr; + + if (fit_parse_conf(argv[3], default_addr, + &fdt_addr, &fit_uname_config)) { + debug("* fdt: config '%s' from image at 0x%08lx\n", + fit_uname_config, fdt_addr); + } else if (fit_parse_subimage(argv[3], default_addr, + &fdt_addr, &fit_uname_fdt)) { + debug("* fdt: subimage '%s' from image at 0x%08lx\n", + fit_uname_fdt, fdt_addr); + } else +#endif + { + fdt_addr = simple_strtoul(argv[3], NULL, 16); + debug("* fdt: cmdline image address = 0x%08lx\n", + fdt_addr); + } +#if defined(CONFIG_FIT) + } else { + /* use FIT configuration provided in first bootm + * command argument + */ + fdt_addr = map_to_sysmem(images->fit_hdr_os); + fit_uname_config = images->fit_uname_cfg; + debug("* fdt: using config '%s' from image at 0x%08lx\n", + fit_uname_config, fdt_addr); + + /* + * Check whether configuration has FDT blob defined, + * if not quit silently. + */ + fit_hdr = images->fit_hdr_os; + cfg_noffset = fit_conf_get_node(fit_hdr, + fit_uname_config); + if (cfg_noffset < 0) { + debug("* fdt: no such config\n"); + return 0; + } + + fdt_noffset = fit_conf_get_fdt_node(fit_hdr, + cfg_noffset); + if (fdt_noffset < 0) { + debug("* fdt: no fdt in config\n"); + return 0; + } + } +#endif + + debug("## Checking for 'FDT'/'FDT Image' at %08lx\n", + fdt_addr); + + /* copy from dataflash if needed */ + fdt_addr = genimg_get_image(fdt_addr); + + /* + * Check if there is an FDT image at the + * address provided in the second bootm argument + * check image type, for FIT images get a FIT node. + */ + buf = map_sysmem(fdt_addr, 0); + switch (genimg_get_format(buf)) { + case IMAGE_FORMAT_LEGACY: + /* verify fdt_addr points to a valid image header */ + printf("## Flattened Device Tree from Legacy Image at %08lx\n", + fdt_addr); + fdt_hdr = image_get_fdt(fdt_addr); + if (!fdt_hdr) + goto error; + + /* + * move image data to the load address, + * make sure we don't overwrite initial image + */ + image_start = (ulong)fdt_hdr; + image_data = (ulong)image_get_data(fdt_hdr); + image_end = image_get_image_end(fdt_hdr); + + load_start = image_get_load(fdt_hdr); + load_end = load_start + image_get_data_size(fdt_hdr); + + if (load_start == image_start || + load_start == image_data) { + fdt_blob = (char *)image_data; + break; + } + + if ((load_start < image_end) && + (load_end > image_start)) { + fdt_error("fdt overwritten"); + goto error; + } + + debug(" Loading FDT from 0x%08lx to 0x%08lx\n", + image_data, load_start); + + memmove((void *)load_start, + (void *)image_data, + image_get_data_size(fdt_hdr)); + + fdt_blob = (char *)load_start; + break; + case IMAGE_FORMAT_FIT: + /* + * This case will catch both: new uImage format + * (libfdt based) and raw FDT blob (also libfdt + * based). + */ +#if defined(CONFIG_FIT) + /* check FDT blob vs FIT blob */ + if (fit_check_format(buf)) { + /* + * FIT image + */ + fit_hdr = buf; + printf("## Flattened Device Tree from FIT Image at %08lx\n", + fdt_addr); + + if (!fit_uname_fdt) { + /* + * no FDT blob image node unit name, + * try to get config node first. If + * config unit node name is NULL + * fit_conf_get_node() will try to + * find default config node + */ + cfg_noffset = fit_conf_get_node(fit_hdr, + fit_uname_config); + + if (cfg_noffset < 0) { + fdt_error("Could not find configuration node\n"); + goto error; + } + + fit_uname_config = fdt_get_name(fit_hdr, + cfg_noffset, NULL); + printf(" Using '%s' configuration\n", + fit_uname_config); + + fdt_noffset = fit_conf_get_fdt_node( + fit_hdr, + cfg_noffset); + fit_uname_fdt = fit_get_name(fit_hdr, + fdt_noffset, NULL); + } else { + /* + * get FDT component image node + * offset + */ + fdt_noffset = fit_image_get_node( + fit_hdr, + fit_uname_fdt); + } + if (fdt_noffset < 0) { + fdt_error("Could not find subimage node\n"); + goto error; + } + + printf(" Trying '%s' FDT blob subimage\n", + fit_uname_fdt); + + if (!fit_check_fdt(fit_hdr, fdt_noffset, + images->verify)) + goto error; + + /* get ramdisk image data address and length */ + if (fit_image_get_data(fit_hdr, fdt_noffset, + &data, &size)) { + fdt_error("Could not find FDT subimage data"); + goto error; + } + + /* + * verify that image data is a proper FDT + * blob + */ + if (fdt_check_header((char *)data) != 0) { + fdt_error("Subimage data is not a FTD"); + goto error; + } + + /* + * move image data to the load address, + * make sure we don't overwrite initial image + */ + image_start = (ulong)fit_hdr; + image_end = fit_get_end(fit_hdr); + + if (fit_image_get_load(fit_hdr, fdt_noffset, + &load_start) == 0) { + load_end = load_start + size; + + if ((load_start < image_end) && + (load_end > image_start)) { + fdt_error("FDT overwritten"); + goto error; + } + + printf(" Loading FDT from 0x%08lx to 0x%08lx\n", + (ulong)data, load_start); + + memmove((void *)load_start, + (void *)data, size); + + fdt_blob = (char *)load_start; + } else { + fdt_blob = (char *)data; + } + + images->fit_hdr_fdt = fit_hdr; + images->fit_uname_fdt = fit_uname_fdt; + images->fit_noffset_fdt = fdt_noffset; + break; + } else +#endif + { + /* + * FDT blob + */ + fdt_blob = buf; + debug("* fdt: raw FDT blob\n"); + printf("## Flattened Device Tree blob at %08lx\n", + (long)fdt_addr); + } + break; + default: + puts("ERROR: Did not find a cmdline Flattened Device Tree\n"); + goto error; + } + + printf(" Booting using the fdt blob at 0x%p\n", fdt_blob); + + } else if (images->legacy_hdr_valid && + image_check_type(&images->legacy_hdr_os_copy, + IH_TYPE_MULTI)) { + ulong fdt_data, fdt_len; + + /* + * Now check if we have a legacy multi-component image, + * get second entry data start address and len. + */ + printf("## Flattened Device Tree from multi component Image at %08lX\n", + (ulong)images->legacy_hdr_os); + + image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data, + &fdt_len); + if (fdt_len) { + fdt_blob = (char *)fdt_data; + printf(" Booting using the fdt at 0x%p\n", fdt_blob); + + if (fdt_check_header(fdt_blob) != 0) { + fdt_error("image is not a fdt"); + goto error; + } + + if (fdt_totalsize(fdt_blob) != fdt_len) { + fdt_error("fdt size != image size"); + goto error; + } + } else { + debug("## No Flattened Device Tree\n"); + return 0; + } + } else { + debug("## No Flattened Device Tree\n"); + return 0; + } + + *of_flat_tree = fdt_blob; + *of_size = fdt_totalsize(fdt_blob); + debug(" of_flat_tree at 0x%08lx size 0x%08lx\n", + (ulong)*of_flat_tree, *of_size); + + return 0; + +error: + *of_flat_tree = NULL; + *of_size = 0; + return 1; +} + +/* + * Verify the device tree. + * + * This function is called after all device tree fix-ups have been enacted, + * so that the final device tree can be verified. The definition of "verified" + * is up to the specific implementation. However, it generally means that the + * addresses of some of the devices in the device tree are compared with the + * actual addresses at which U-Boot has placed them. + * + * Returns 1 on success, 0 on failure. If 0 is returned, U-boot will halt the + * boot process. + */ +__weak int ft_verify_fdt(void *fdt) +{ + return 1; +} + +__weak int arch_fixup_memory_node(void *blob) +{ + return 0; +} + +int image_setup_libfdt(bootm_headers_t *images, void *blob, + int of_size, struct lmb *lmb) +{ + ulong *initrd_start = &images->initrd_start; + ulong *initrd_end = &images->initrd_end; + int ret; + + if (fdt_chosen(blob, 1) < 0) { + puts("ERROR: /chosen node create failed"); + puts(" - must RESET the board to recover.\n"); + return -1; + } + arch_fixup_memory_node(blob); + if (IMAAGE_OF_BOARD_SETUP) + ft_board_setup(blob, gd->bd); + fdt_fixup_ethernet(blob); + + /* Delete the old LMB reservation */ + lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob, + (phys_size_t)fdt_totalsize(blob)); + + ret = fdt_resize(blob); + if (ret < 0) + return ret; + of_size = ret; + + if (*initrd_start && *initrd_end) { + of_size += FDT_RAMDISK_OVERHEAD; + fdt_set_totalsize(blob, of_size); + } + /* Create a new LMB reservation */ + lmb_reserve(lmb, (ulong)blob, of_size); + + fdt_initrd(blob, *initrd_start, *initrd_end, 1); + if (!ft_verify_fdt(blob)) + return -1; + + return 0; +} diff --git a/common/image-fit.c b/common/image-fit.c new file mode 100644 index 0000000..254feec --- /dev/null +++ b/common/image-fit.c @@ -0,0 +1,1492 @@ +/* + * Copyright (c) 2013, Google Inc. + * + * (C) Copyright 2008 Semihalf + * + * (C) Copyright 2000-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef USE_HOSTCC +#include "mkimage.h" +#include <image.h> +#include <time.h> +#else +#include <common.h> +#endif /* !USE_HOSTCC*/ + +#include <bootstage.h> +#include <sha1.h> +#include <u-boot/crc.h> +#include <u-boot/md5.h> + +/*****************************************************************************/ +/* New uImage format routines */ +/*****************************************************************************/ +#ifndef USE_HOSTCC +static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr, + ulong *addr, const char **name) +{ + const char *sep; + + *addr = addr_curr; + *name = NULL; + + sep = strchr(spec, sepc); + if (sep) { + if (sep - spec > 0) + *addr = simple_strtoul(spec, NULL, 16); + + *name = sep + 1; + return 1; + } + + return 0; +} + +/** + * fit_parse_conf - parse FIT configuration spec + * @spec: input string, containing configuration spec + * @add_curr: current image address (to be used as a possible default) + * @addr: pointer to a ulong variable, will hold FIT image address of a given + * configuration + * @conf_name double pointer to a char, will hold pointer to a configuration + * unit name + * + * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>, + * where <addr> is a FIT image address that contains configuration + * with a <conf> unit name. + * + * Address part is optional, and if omitted default add_curr will + * be used instead. + * + * returns: + * 1 if spec is a valid configuration string, + * addr and conf_name are set accordingly + * 0 otherwise + */ +int fit_parse_conf(const char *spec, ulong addr_curr, + ulong *addr, const char **conf_name) +{ + return fit_parse_spec(spec, '#', addr_curr, addr, conf_name); +} + +/** + * fit_parse_subimage - parse FIT subimage spec + * @spec: input string, containing subimage spec + * @add_curr: current image address (to be used as a possible default) + * @addr: pointer to a ulong variable, will hold FIT image address of a given + * subimage + * @image_name: double pointer to a char, will hold pointer to a subimage name + * + * fit_parse_subimage() expects subimage spec in the for of + * [<addr>]:<subimage>, where <addr> is a FIT image address that contains + * subimage with a <subimg> unit name. + * + * Address part is optional, and if omitted default add_curr will + * be used instead. + * + * returns: + * 1 if spec is a valid subimage string, + * addr and image_name are set accordingly + * 0 otherwise + */ +int fit_parse_subimage(const char *spec, ulong addr_curr, + ulong *addr, const char **image_name) +{ + return fit_parse_spec(spec, ':', addr_curr, addr, image_name); +} +#endif /* !USE_HOSTCC */ + +static void fit_get_debug(const void *fit, int noffset, + char *prop_name, int err) +{ + debug("Can't get '%s' property from FIT 0x%08lx, node: offset %d, name %s (%s)\n", + prop_name, (ulong)fit, noffset, fit_get_name(fit, noffset, NULL), + fdt_strerror(err)); +} + +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT) +/** + * fit_print_contents - prints out the contents of the FIT format image + * @fit: pointer to the FIT format image header + * @p: pointer to prefix string + * + * fit_print_contents() formats a multi line FIT image contents description. + * The routine prints out FIT image properties (root node level) follwed by + * the details of each component image. + * + * returns: + * no returned results + */ +void fit_print_contents(const void *fit) +{ + char *desc; + char *uname; + int images_noffset; + int confs_noffset; + int noffset; + int ndepth; + int count = 0; + int ret; + const char *p; + time_t timestamp; + + /* Indent string is defined in header image.h */ + p = IMAGE_INDENT_STRING; + + /* Root node properties */ + ret = fit_get_desc(fit, 0, &desc); + printf("%sFIT description: ", p); + if (ret) + printf("unavailable\n"); + else + printf("%s\n", desc); + + if (IMAGE_ENABLE_TIMESTAMP) { + ret = fit_get_timestamp(fit, 0, ×tamp); + printf("%sCreated: ", p); + if (ret) + printf("unavailable\n"); + else + genimg_print_time(timestamp); + } + + /* Find images parent node offset */ + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (images_noffset < 0) { + printf("Can't find images parent node '%s' (%s)\n", + FIT_IMAGES_PATH, fdt_strerror(images_noffset)); + return; + } + + /* Process its subnodes, print out component images details */ + for (ndepth = 0, count = 0, + noffset = fdt_next_node(fit, images_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + /* + * Direct child node of the images parent node, + * i.e. component image node. + */ + printf("%s Image %u (%s)\n", p, count++, + fit_get_name(fit, noffset, NULL)); + + fit_image_print(fit, noffset, p); + } + } + + /* Find configurations parent node offset */ + confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); + if (confs_noffset < 0) { + debug("Can't get configurations parent node '%s' (%s)\n", + FIT_CONFS_PATH, fdt_strerror(confs_noffset)); + return; + } + + /* get default configuration unit name from default property */ + uname = (char *)fdt_getprop(fit, noffset, FIT_DEFAULT_PROP, NULL); + if (uname) + printf("%s Default Configuration: '%s'\n", p, uname); + + /* Process its subnodes, print out configurations details */ + for (ndepth = 0, count = 0, + noffset = fdt_next_node(fit, confs_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + /* + * Direct child node of the configurations parent node, + * i.e. configuration node. + */ + printf("%s Configuration %u (%s)\n", p, count++, + fit_get_name(fit, noffset, NULL)); + + fit_conf_print(fit, noffset, p); + } + } +} + +/** + * fit_image_print_data() - prints out the hash node details + * @fit: pointer to the FIT format image header + * @noffset: offset of the hash node + * @p: pointer to prefix string + * + * fit_image_print_data() lists properies for the processed hash node + * + * returns: + * no returned results + */ +static void fit_image_print_data(const void *fit, int noffset, const char *p) +{ + char *algo; + uint8_t *value; + int value_len; + int i, ret; + + /* + * Check subnode name, must be equal to "hash". + * Multiple hash nodes require unique unit node + * names, e.g. hash@1, hash@2, etc. + */ + if (strncmp(fit_get_name(fit, noffset, NULL), + FIT_HASH_NODENAME, + strlen(FIT_HASH_NODENAME)) != 0) + return; + + debug("%s Hash node: '%s'\n", p, + fit_get_name(fit, noffset, NULL)); + + printf("%s Hash algo: ", p); + if (fit_image_hash_get_algo(fit, noffset, &algo)) { + printf("invalid/unsupported\n"); + return; + } + printf("%s\n", algo); + + ret = fit_image_hash_get_value(fit, noffset, &value, + &value_len); + printf("%s Hash value: ", p); + if (ret) { + printf("unavailable\n"); + } else { + for (i = 0; i < value_len; i++) + printf("%02x", value[i]); + printf("\n"); + } + + debug("%s Hash len: %d\n", p, value_len); +} + +/** + * fit_image_print_verification_data() - prints out the hash/signature details + * @fit: pointer to the FIT format image header + * @noffset: offset of the hash or signature node + * @p: pointer to prefix string + * + * This lists properies for the processed hash node + * + * returns: + * no returned results + */ +static void fit_image_print_verification_data(const void *fit, int noffset, + const char *p) +{ + const char *name; + + /* + * Check subnode name, must be equal to "hash" or "signature". + * Multiple hash/signature nodes require unique unit node + * names, e.g. hash@1, hash@2, signature@1, signature@2, etc. + */ + name = fit_get_name(fit, noffset, NULL); + if (!strncmp(name, FIT_HASH_NODENAME, strlen(FIT_HASH_NODENAME))) + fit_image_print_data(fit, noffset, p); +} + +/** + * fit_image_print - prints out the FIT component image details + * @fit: pointer to the FIT format image header + * @image_noffset: offset of the component image node + * @p: pointer to prefix string + * + * fit_image_print() lists all mandatory properies for the processed component + * image. If present, hash nodes are printed out as well. Load + * address for images of type firmware is also printed out. Since the load + * address is not mandatory for firmware images, it will be output as + * "unavailable" when not present. + * + * returns: + * no returned results + */ +void fit_image_print(const void *fit, int image_noffset, const char *p) +{ + char *desc; + uint8_t type, arch, os, comp; + size_t size; + ulong load, entry; + const void *data; + int noffset; + int ndepth; + int ret; + + /* Mandatory properties */ + ret = fit_get_desc(fit, image_noffset, &desc); + printf("%s Description: ", p); + if (ret) + printf("unavailable\n"); + else + printf("%s\n", desc); + + fit_image_get_type(fit, image_noffset, &type); + printf("%s Type: %s\n", p, genimg_get_type_name(type)); + + fit_image_get_comp(fit, image_noffset, &comp); + printf("%s Compression: %s\n", p, genimg_get_comp_name(comp)); + + ret = fit_image_get_data(fit, image_noffset, &data, &size); + +#ifndef USE_HOSTCC + printf("%s Data Start: ", p); + if (ret) + printf("unavailable\n"); + else + printf("0x%08lx\n", (ulong)data); +#endif + + printf("%s Data Size: ", p); + if (ret) + printf("unavailable\n"); + else + genimg_print_size(size); + + /* Remaining, type dependent properties */ + if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || + (type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) || + (type == IH_TYPE_FLATDT)) { + fit_image_get_arch(fit, image_noffset, &arch); + printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch)); + } + + if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) { + fit_image_get_os(fit, image_noffset, &os); + printf("%s OS: %s\n", p, genimg_get_os_name(os)); + } + + if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || + (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) { + ret = fit_image_get_load(fit, image_noffset, &load); + printf("%s Load Address: ", p); + if (ret) + printf("unavailable\n"); + else + printf("0x%08lx\n", load); + } + + if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || + (type == IH_TYPE_RAMDISK)) { + fit_image_get_entry(fit, image_noffset, &entry); + printf("%s Entry Point: ", p); + if (ret) + printf("unavailable\n"); + else + printf("0x%08lx\n", entry); + } + + /* Process all hash subnodes of the component image node */ + for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + /* Direct child node of the component image node */ + fit_image_print_verification_data(fit, noffset, p); + } + } +} +#endif + +/** + * fit_get_desc - get node description property + * @fit: pointer to the FIT format image header + * @noffset: node offset + * @desc: double pointer to the char, will hold pointer to the descrption + * + * fit_get_desc() reads description property from a given node, if + * description is found pointer to it is returened in third call argument. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_get_desc(const void *fit, int noffset, char **desc) +{ + int len; + + *desc = (char *)fdt_getprop(fit, noffset, FIT_DESC_PROP, &len); + if (*desc == NULL) { + fit_get_debug(fit, noffset, FIT_DESC_PROP, len); + return -1; + } + + return 0; +} + +/** + * fit_get_timestamp - get node timestamp property + * @fit: pointer to the FIT format image header + * @noffset: node offset + * @timestamp: pointer to the time_t, will hold read timestamp + * + * fit_get_timestamp() reads timestamp poperty from given node, if timestamp + * is found and has a correct size its value is retured in third call + * argument. + * + * returns: + * 0, on success + * -1, on property read failure + * -2, on wrong timestamp size + */ +int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp) +{ + int len; + const void *data; + + data = fdt_getprop(fit, noffset, FIT_TIMESTAMP_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_TIMESTAMP_PROP, len); + return -1; + } + if (len != sizeof(uint32_t)) { + debug("FIT timestamp with incorrect size of (%u)\n", len); + return -2; + } + + *timestamp = uimage_to_cpu(*((uint32_t *)data)); + return 0; +} + +/** + * fit_image_get_node - get node offset for component image of a given unit name + * @fit: pointer to the FIT format image header + * @image_uname: component image node unit name + * + * fit_image_get_node() finds a component image (withing the '/images' + * node) of a provided unit name. If image is found its node offset is + * returned to the caller. + * + * returns: + * image node offset when found (>=0) + * negative number on failure (FDT_ERR_* code) + */ +int fit_image_get_node(const void *fit, const char *image_uname) +{ + int noffset, images_noffset; + + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (images_noffset < 0) { + debug("Can't find images parent node '%s' (%s)\n", + FIT_IMAGES_PATH, fdt_strerror(images_noffset)); + return images_noffset; + } + + noffset = fdt_subnode_offset(fit, images_noffset, image_uname); + if (noffset < 0) { + debug("Can't get node offset for image unit name: '%s' (%s)\n", + image_uname, fdt_strerror(noffset)); + } + + return noffset; +} + +/** + * fit_image_get_os - get os id for a given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @os: pointer to the uint8_t, will hold os numeric id + * + * fit_image_get_os() finds os property in a given component image node. + * If the property is found, its (string) value is translated to the numeric + * id which is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_os(const void *fit, int noffset, uint8_t *os) +{ + int len; + const void *data; + + /* Get OS name from property data */ + data = fdt_getprop(fit, noffset, FIT_OS_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_OS_PROP, len); + *os = -1; + return -1; + } + + /* Translate OS name to id */ + *os = genimg_get_os_id(data); + return 0; +} + +/** + * fit_image_get_arch - get arch id for a given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @arch: pointer to the uint8_t, will hold arch numeric id + * + * fit_image_get_arch() finds arch property in a given component image node. + * If the property is found, its (string) value is translated to the numeric + * id which is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch) +{ + int len; + const void *data; + + /* Get architecture name from property data */ + data = fdt_getprop(fit, noffset, FIT_ARCH_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_ARCH_PROP, len); + *arch = -1; + return -1; + } + + /* Translate architecture name to id */ + *arch = genimg_get_arch_id(data); + return 0; +} + +/** + * fit_image_get_type - get type id for a given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @type: pointer to the uint8_t, will hold type numeric id + * + * fit_image_get_type() finds type property in a given component image node. + * If the property is found, its (string) value is translated to the numeric + * id which is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_type(const void *fit, int noffset, uint8_t *type) +{ + int len; + const void *data; + + /* Get image type name from property data */ + data = fdt_getprop(fit, noffset, FIT_TYPE_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_TYPE_PROP, len); + *type = -1; + return -1; + } + + /* Translate image type name to id */ + *type = genimg_get_type_id(data); + return 0; +} + +/** + * fit_image_get_comp - get comp id for a given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @comp: pointer to the uint8_t, will hold comp numeric id + * + * fit_image_get_comp() finds comp property in a given component image node. + * If the property is found, its (string) value is translated to the numeric + * id which is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp) +{ + int len; + const void *data; + + /* Get compression name from property data */ + data = fdt_getprop(fit, noffset, FIT_COMP_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_COMP_PROP, len); + *comp = -1; + return -1; + } + + /* Translate compression name to id */ + *comp = genimg_get_comp_id(data); + return 0; +} + +/** + * fit_image_get_load() - get load addr property for given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @load: pointer to the uint32_t, will hold load address + * + * fit_image_get_load() finds load address property in a given component + * image node. If the property is found, its value is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_load(const void *fit, int noffset, ulong *load) +{ + int len; + const uint32_t *data; + + data = fdt_getprop(fit, noffset, FIT_LOAD_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_LOAD_PROP, len); + return -1; + } + + *load = uimage_to_cpu(*data); + return 0; +} + +/** + * fit_image_get_entry() - get entry point address property + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @entry: pointer to the uint32_t, will hold entry point address + * + * This gets the entry point address property for a given component image + * node. + * + * fit_image_get_entry() finds entry point address property in a given + * component image node. If the property is found, its value is returned + * to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_entry(const void *fit, int noffset, ulong *entry) +{ + int len; + const uint32_t *data; + + data = fdt_getprop(fit, noffset, FIT_ENTRY_PROP, &len); + if (data == NULL) { + fit_get_debug(fit, noffset, FIT_ENTRY_PROP, len); + return -1; + } + + *entry = uimage_to_cpu(*data); + return 0; +} + +/** + * fit_image_get_data - get data property and its size for a given component image node + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @data: double pointer to void, will hold data property's data address + * @size: pointer to size_t, will hold data property's data size + * + * fit_image_get_data() finds data property in a given component image node. + * If the property is found its data start address and size are returned to + * the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_get_data(const void *fit, int noffset, + const void **data, size_t *size) +{ + int len; + + *data = fdt_getprop(fit, noffset, FIT_DATA_PROP, &len); + if (*data == NULL) { + fit_get_debug(fit, noffset, FIT_DATA_PROP, len); + *size = 0; + return -1; + } + + *size = len; + return 0; +} + +/** + * fit_image_hash_get_algo - get hash algorithm name + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @algo: double pointer to char, will hold pointer to the algorithm name + * + * fit_image_hash_get_algo() finds hash algorithm property in a given hash node. + * If the property is found its data start address is returned to the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_hash_get_algo(const void *fit, int noffset, char **algo) +{ + int len; + + *algo = (char *)fdt_getprop(fit, noffset, FIT_ALGO_PROP, &len); + if (*algo == NULL) { + fit_get_debug(fit, noffset, FIT_ALGO_PROP, len); + return -1; + } + + return 0; +} + +/** + * fit_image_hash_get_value - get hash value and length + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @value: double pointer to uint8_t, will hold address of a hash value data + * @value_len: pointer to an int, will hold hash data length + * + * fit_image_hash_get_value() finds hash value property in a given hash node. + * If the property is found its data start address and size are returned to + * the caller. + * + * returns: + * 0, on success + * -1, on failure + */ +int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, + int *value_len) +{ + int len; + + *value = (uint8_t *)fdt_getprop(fit, noffset, FIT_VALUE_PROP, &len); + if (*value == NULL) { + fit_get_debug(fit, noffset, FIT_VALUE_PROP, len); + *value_len = 0; + return -1; + } + + *value_len = len; + return 0; +} + +/** + * fit_image_hash_get_ignore - get hash ignore flag + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @ignore: pointer to an int, will hold hash ignore flag + * + * fit_image_hash_get_ignore() finds hash ignore property in a given hash node. + * If the property is found and non-zero, the hash algorithm is not verified by + * u-boot automatically. + * + * returns: + * 0, on ignore not found + * value, on ignore found + */ +static int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore) +{ + int len; + int *value; + + value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len); + if (value == NULL || len != sizeof(int)) + *ignore = 0; + else + *ignore = *value; + + return 0; +} + +/** + * fit_set_timestamp - set node timestamp property + * @fit: pointer to the FIT format image header + * @noffset: node offset + * @timestamp: timestamp value to be set + * + * fit_set_timestamp() attempts to set timestamp property in the requested + * node and returns operation status to the caller. + * + * returns: + * 0, on success + * -1, on property read failure + */ +int fit_set_timestamp(void *fit, int noffset, time_t timestamp) +{ + uint32_t t; + int ret; + + t = cpu_to_uimage(timestamp); + ret = fdt_setprop(fit, noffset, FIT_TIMESTAMP_PROP, &t, + sizeof(uint32_t)); + if (ret) { + printf("Can't set '%s' property for '%s' node (%s)\n", + FIT_TIMESTAMP_PROP, fit_get_name(fit, noffset, NULL), + fdt_strerror(ret)); + return -1; + } + + return 0; +} + +/** + * calculate_hash - calculate and return hash for provided input data + * @data: pointer to the input data + * @data_len: data length + * @algo: requested hash algorithm + * @value: pointer to the char, will hold hash value data (caller must + * allocate enough free space) + * value_len: length of the calculated hash + * + * calculate_hash() computes input data hash according to the requested + * algorithm. + * Resulting hash value is placed in caller provided 'value' buffer, length + * of the calculated hash is returned via value_len pointer argument. + * + * returns: + * 0, on success + * -1, when algo is unsupported + */ +int calculate_hash(const void *data, int data_len, const char *algo, + uint8_t *value, int *value_len) +{ + if (IMAGE_ENABLE_CRC32 && strcmp(algo, "crc32") == 0) { + *((uint32_t *)value) = crc32_wd(0, data, data_len, + CHUNKSZ_CRC32); + *((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value)); + *value_len = 4; + } else if (IMAGE_ENABLE_SHA1 && strcmp(algo, "sha1") == 0) { + sha1_csum_wd((unsigned char *)data, data_len, + (unsigned char *)value, CHUNKSZ_SHA1); + *value_len = 20; + } else if (IMAGE_ENABLE_MD5 && strcmp(algo, "md5") == 0) { + md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5); + *value_len = 16; + } else { + debug("Unsupported hash alogrithm\n"); + return -1; + } + return 0; +} + +static int fit_image_check_hash(const void *fit, int noffset, const void *data, + size_t size, char **err_msgp) +{ + uint8_t value[FIT_MAX_HASH_LEN]; + int value_len; + char *algo; + uint8_t *fit_value; + int fit_value_len; + int ignore; + + *err_msgp = NULL; + + if (fit_image_hash_get_algo(fit, noffset, &algo)) { + *err_msgp = "Can't get hash algo property"; + return -1; + } + printf("%s", algo); + + if (IMAGE_ENABLE_IGNORE) { + fit_image_hash_get_ignore(fit, noffset, &ignore); + if (ignore) { + printf("-skipped "); + return 0; + } + } + + if (fit_image_hash_get_value(fit, noffset, &fit_value, + &fit_value_len)) { + *err_msgp = "Can't get hash value property"; + return -1; + } + + if (calculate_hash(data, size, algo, value, &value_len)) { + *err_msgp = "Unsupported hash algorithm"; + return -1; + } + + if (value_len != fit_value_len) { + *err_msgp = "Bad hash value len"; + return -1; + } else if (memcmp(value, fit_value, value_len) != 0) { + *err_msgp = "Bad hash value"; + return -1; + } + + return 0; +} + +/** + * fit_image_verify - verify data intergity + * @fit: pointer to the FIT format image header + * @image_noffset: component image node offset + * + * fit_image_verify() goes over component image hash nodes, + * re-calculates each data hash and compares with the value stored in hash + * node. + * + * returns: + * 1, if all hashes are valid + * 0, otherwise (or on error) + */ +int fit_image_verify(const void *fit, int image_noffset) +{ + const void *data; + size_t size; + int noffset; + char *err_msg = ""; + + /* Get image data and data length */ + if (fit_image_get_data(fit, image_noffset, &data, &size)) { + err_msg = "Can't get image data/size"; + return 0; + } + + /* Process all hash subnodes of the component image node */ + for (noffset = fdt_first_subnode(fit, image_noffset); + noffset >= 0; + noffset = fdt_next_subnode(fit, noffset)) { + const char *name = fit_get_name(fit, noffset, NULL); + + /* + * Check subnode name, must be equal to "hash". + * Multiple hash nodes require unique unit node + * names, e.g. hash@1, hash@2, etc. + */ + if (!strncmp(name, FIT_HASH_NODENAME, + strlen(FIT_HASH_NODENAME))) { + if (fit_image_check_hash(fit, noffset, data, size, + &err_msg)) + goto error; + puts("+ "); + } + } + + if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { + err_msg = "Corrupted or truncated tree"; + goto error; + } + + return 1; + +error: + printf(" error!\n%s for '%s' hash node in '%s' image node\n", + err_msg, fit_get_name(fit, noffset, NULL), + fit_get_name(fit, image_noffset, NULL)); + return 0; +} + +/** + * fit_all_image_verify - verify data intergity for all images + * @fit: pointer to the FIT format image header + * + * fit_all_image_verify() goes over all images in the FIT and + * for every images checks if all it's hashes are valid. + * + * returns: + * 1, if all hashes of all images are valid + * 0, otherwise (or on error) + */ +int fit_all_image_verify(const void *fit) +{ + int images_noffset; + int noffset; + int ndepth; + int count; + + /* Find images parent node offset */ + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (images_noffset < 0) { + printf("Can't find images parent node '%s' (%s)\n", + FIT_IMAGES_PATH, fdt_strerror(images_noffset)); + return 0; + } + + /* Process all image subnodes, check hashes for each */ + printf("## Checking hash(es) for FIT Image at %08lx ...\n", + (ulong)fit); + for (ndepth = 0, count = 0, + noffset = fdt_next_node(fit, images_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + /* + * Direct child node of the images parent node, + * i.e. component image node. + */ + printf(" Hash(es) for Image %u (%s): ", count++, + fit_get_name(fit, noffset, NULL)); + + if (!fit_image_verify(fit, noffset)) + return 0; + printf("\n"); + } + } + return 1; +} + +/** + * fit_image_check_os - check whether image node is of a given os type + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @os: requested image os + * + * fit_image_check_os() reads image os property and compares its numeric + * id with the requested os. Comparison result is returned to the caller. + * + * returns: + * 1 if image is of given os type + * 0 otherwise (or on error) + */ +int fit_image_check_os(const void *fit, int noffset, uint8_t os) +{ + uint8_t image_os; + + if (fit_image_get_os(fit, noffset, &image_os)) + return 0; + return (os == image_os); +} + +/** + * fit_image_check_arch - check whether image node is of a given arch + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @arch: requested imagearch + * + * fit_image_check_arch() reads image arch property and compares its numeric + * id with the requested arch. Comparison result is returned to the caller. + * + * returns: + * 1 if image is of given arch + * 0 otherwise (or on error) + */ +int fit_image_check_arch(const void *fit, int noffset, uint8_t arch) +{ + uint8_t image_arch; + + if (fit_image_get_arch(fit, noffset, &image_arch)) + return 0; + return (arch == image_arch); +} + +/** + * fit_image_check_type - check whether image node is of a given type + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @type: requested image type + * + * fit_image_check_type() reads image type property and compares its numeric + * id with the requested type. Comparison result is returned to the caller. + * + * returns: + * 1 if image is of given type + * 0 otherwise (or on error) + */ +int fit_image_check_type(const void *fit, int noffset, uint8_t type) +{ + uint8_t image_type; + + if (fit_image_get_type(fit, noffset, &image_type)) + return 0; + return (type == image_type); +} + +/** + * fit_image_check_comp - check whether image node uses given compression + * @fit: pointer to the FIT format image header + * @noffset: component image node offset + * @comp: requested image compression type + * + * fit_image_check_comp() reads image compression property and compares its + * numeric id with the requested compression type. Comparison result is + * returned to the caller. + * + * returns: + * 1 if image uses requested compression + * 0 otherwise (or on error) + */ +int fit_image_check_comp(const void *fit, int noffset, uint8_t comp) +{ + uint8_t image_comp; + + if (fit_image_get_comp(fit, noffset, &image_comp)) + return 0; + return (comp == image_comp); +} + +/** + * fit_check_format - sanity check FIT image format + * @fit: pointer to the FIT format image header + * + * fit_check_format() runs a basic sanity FIT image verification. + * Routine checks for mandatory properties, nodes, etc. + * + * returns: + * 1, on success + * 0, on failure + */ +int fit_check_format(const void *fit) +{ + /* mandatory / node 'description' property */ + if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) { + debug("Wrong FIT format: no description\n"); + return 0; + } + + if (IMAGE_ENABLE_TIMESTAMP) { + /* mandatory / node 'timestamp' property */ + if (fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) { + debug("Wrong FIT format: no timestamp\n"); + return 0; + } + } + + /* mandatory subimages parent '/images' node */ + if (fdt_path_offset(fit, FIT_IMAGES_PATH) < 0) { + debug("Wrong FIT format: no images parent node\n"); + return 0; + } + + return 1; +} + + +/** + * fit_conf_find_compat + * @fit: pointer to the FIT format image header + * @fdt: pointer to the device tree to compare against + * + * fit_conf_find_compat() attempts to find the configuration whose fdt is the + * most compatible with the passed in device tree. + * + * Example: + * + * / o image-tree + * |-o images + * | |-o fdt@1 + * | |-o fdt@2 + * | + * |-o configurations + * |-o config@1 + * | |-fdt = fdt@1 + * | + * |-o config@2 + * |-fdt = fdt@2 + * + * / o U-Boot fdt + * |-compatible = "foo,bar", "bim,bam" + * + * / o kernel fdt1 + * |-compatible = "foo,bar", + * + * / o kernel fdt2 + * |-compatible = "bim,bam", "baz,biz" + * + * Configuration 1 would be picked because the first string in U-Boot's + * compatible list, "foo,bar", matches a compatible string in the root of fdt1. + * "bim,bam" in fdt2 matches the second string which isn't as good as fdt1. + * + * returns: + * offset to the configuration to use if one was found + * -1 otherwise + */ +int fit_conf_find_compat(const void *fit, const void *fdt) +{ + int ndepth = 0; + int noffset, confs_noffset, images_noffset; + const void *fdt_compat; + int fdt_compat_len; + int best_match_offset = 0; + int best_match_pos = 0; + + confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (confs_noffset < 0 || images_noffset < 0) { + debug("Can't find configurations or images nodes.\n"); + return -1; + } + + fdt_compat = fdt_getprop(fdt, 0, "compatible", &fdt_compat_len); + if (!fdt_compat) { + debug("Fdt for comparison has no \"compatible\" property.\n"); + return -1; + } + + /* + * Loop over the configurations in the FIT image. + */ + for (noffset = fdt_next_node(fit, confs_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + const void *kfdt; + const char *kfdt_name; + int kfdt_noffset; + const char *cur_fdt_compat; + int len; + size_t size; + int i; + + if (ndepth > 1) + continue; + + kfdt_name = fdt_getprop(fit, noffset, "fdt", &len); + if (!kfdt_name) { + debug("No fdt property found.\n"); + continue; + } + kfdt_noffset = fdt_subnode_offset(fit, images_noffset, + kfdt_name); + if (kfdt_noffset < 0) { + debug("No image node named \"%s\" found.\n", + kfdt_name); + continue; + } + /* + * Get a pointer to this configuration's fdt. + */ + if (fit_image_get_data(fit, kfdt_noffset, &kfdt, &size)) { + debug("Failed to get fdt \"%s\".\n", kfdt_name); + continue; + } + + len = fdt_compat_len; + cur_fdt_compat = fdt_compat; + /* + * Look for a match for each U-Boot compatibility string in + * turn in this configuration's fdt. + */ + for (i = 0; len > 0 && + (!best_match_offset || best_match_pos > i); i++) { + int cur_len = strlen(cur_fdt_compat) + 1; + + if (!fdt_node_check_compatible(kfdt, 0, + cur_fdt_compat)) { + best_match_offset = noffset; + best_match_pos = i; + break; + } + len -= cur_len; + cur_fdt_compat += cur_len; + } + } + if (!best_match_offset) { + debug("No match found.\n"); + return -1; + } + + return best_match_offset; +} + +/** + * fit_conf_get_node - get node offset for configuration of a given unit name + * @fit: pointer to the FIT format image header + * @conf_uname: configuration node unit name + * + * fit_conf_get_node() finds a configuration (withing the '/configurations' + * parant node) of a provided unit name. If configuration is found its node + * offset is returned to the caller. + * + * When NULL is provided in second argument fit_conf_get_node() will search + * for a default configuration node instead. Default configuration node unit + * name is retrived from FIT_DEFAULT_PROP property of the '/configurations' + * node. + * + * returns: + * configuration node offset when found (>=0) + * negative number on failure (FDT_ERR_* code) + */ +int fit_conf_get_node(const void *fit, const char *conf_uname) +{ + int noffset, confs_noffset; + int len; + + confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); + if (confs_noffset < 0) { + debug("Can't find configurations parent node '%s' (%s)\n", + FIT_CONFS_PATH, fdt_strerror(confs_noffset)); + return confs_noffset; + } + + if (conf_uname == NULL) { + /* get configuration unit name from the default property */ + debug("No configuration specified, trying default...\n"); + conf_uname = (char *)fdt_getprop(fit, confs_noffset, + FIT_DEFAULT_PROP, &len); + if (conf_uname == NULL) { + fit_get_debug(fit, confs_noffset, FIT_DEFAULT_PROP, + len); + return len; + } + debug("Found default configuration: '%s'\n", conf_uname); + } + + noffset = fdt_subnode_offset(fit, confs_noffset, conf_uname); + if (noffset < 0) { + debug("Can't get node offset for configuration unit name: '%s' (%s)\n", + conf_uname, fdt_strerror(noffset)); + } + + return noffset; +} + +int fit_conf_get_prop_node(const void *fit, int noffset, + const char *prop_name) +{ + char *uname; + int len; + + /* get kernel image unit name from configuration kernel property */ + uname = (char *)fdt_getprop(fit, noffset, prop_name, &len); + if (uname == NULL) + return len; + + return fit_image_get_node(fit, uname); +} + +/** + * fit_conf_get_kernel_node - get kernel image node offset that corresponds to + * a given configuration + * @fit: pointer to the FIT format image header + * @noffset: configuration node offset + * + * fit_conf_get_kernel_node() retrives kernel image node unit name from + * configuration FIT_KERNEL_PROP property and translates it to the node + * offset. + * + * returns: + * image node offset when found (>=0) + * negative number on failure (FDT_ERR_* code) + */ +int fit_conf_get_kernel_node(const void *fit, int noffset) +{ + return fit_conf_get_prop_node(fit, noffset, FIT_KERNEL_PROP); +} + +/** + * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to + * a given configuration + * @fit: pointer to the FIT format image header + * @noffset: configuration node offset + * + * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from + * configuration FIT_KERNEL_PROP property and translates it to the node + * offset. + * + * returns: + * image node offset when found (>=0) + * negative number on failure (FDT_ERR_* code) + */ +int fit_conf_get_ramdisk_node(const void *fit, int noffset) +{ + return fit_conf_get_prop_node(fit, noffset, FIT_RAMDISK_PROP); +} + +/** + * fit_conf_get_fdt_node - get fdt image node offset that corresponds to + * a given configuration + * @fit: pointer to the FIT format image header + * @noffset: configuration node offset + * + * fit_conf_get_fdt_node() retrives fdt image node unit name from + * configuration FIT_KERNEL_PROP property and translates it to the node + * offset. + * + * returns: + * image node offset when found (>=0) + * negative number on failure (FDT_ERR_* code) + */ +int fit_conf_get_fdt_node(const void *fit, int noffset) +{ + return fit_conf_get_prop_node(fit, noffset, FIT_FDT_PROP); +} + +/** + * fit_conf_print - prints out the FIT configuration details + * @fit: pointer to the FIT format image header + * @noffset: offset of the configuration node + * @p: pointer to prefix string + * + * fit_conf_print() lists all mandatory properies for the processed + * configuration node. + * + * returns: + * no returned results + */ +void fit_conf_print(const void *fit, int noffset, const char *p) +{ + char *desc; + char *uname; + int ret; + + /* Mandatory properties */ + ret = fit_get_desc(fit, noffset, &desc); + printf("%s Description: ", p); + if (ret) + printf("unavailable\n"); + else + printf("%s\n", desc); + + uname = (char *)fdt_getprop(fit, noffset, FIT_KERNEL_PROP, NULL); + printf("%s Kernel: ", p); + if (uname == NULL) + printf("unavailable\n"); + else + printf("%s\n", uname); + + /* Optional properties */ + uname = (char *)fdt_getprop(fit, noffset, FIT_RAMDISK_PROP, NULL); + if (uname) + printf("%s Init Ramdisk: %s\n", p, uname); + + uname = (char *)fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL); + if (uname) + printf("%s FDT: %s\n", p, uname); +} + +/** + * fit_check_ramdisk - verify FIT format ramdisk subimage + * @fit_hdr: pointer to the FIT ramdisk header + * @rd_noffset: ramdisk subimage node offset within FIT image + * @arch: requested ramdisk image architecture type + * @verify: data CRC verification flag + * + * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from + * specified FIT image. + * + * returns: + * 1, on success + * 0, on failure + */ +int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch, + int verify) +{ + fit_image_print(fit, rd_noffset, " "); + + if (verify) { + puts(" Verifying Hash Integrity ... "); + if (!fit_image_verify(fit, rd_noffset)) { + puts("Bad Data Hash\n"); + bootstage_error(BOOTSTAGE_ID_FIT_RD_HASH); + return 0; + } + puts("OK\n"); + } + + bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL); + if (!fit_image_check_os(fit, rd_noffset, IH_OS_LINUX) || + !fit_image_check_arch(fit, rd_noffset, arch) || + !fit_image_check_type(fit, rd_noffset, IH_TYPE_RAMDISK)) { + printf("No Linux %s Ramdisk Image\n", + genimg_get_arch_name(arch)); + bootstage_error(BOOTSTAGE_ID_FIT_RD_CHECK_ALL); + return 0; + } + + bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK); + return 1; +} diff --git a/common/image.c b/common/image.c index 60c2127..e91c89e 100644 --- a/common/image.c +++ b/common/image.c @@ -39,9 +39,7 @@ #include <logbuff.h> #endif -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) #include <rtc.h> -#endif #include <environment.h> #include <image.h> @@ -51,13 +49,9 @@ #include <fdt_support.h> #endif -#if defined(CONFIG_FIT) #include <u-boot/md5.h> #include <sha1.h> - -static int fit_check_ramdisk(const void *fit, int os_noffset, - uint8_t arch, int verify); -#endif +#include <asm/io.h> #ifdef CONFIG_CMD_BDI extern int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); @@ -76,6 +70,10 @@ static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch, #include <u-boot/crc.h> +#ifndef CONFIG_SYS_BARGSIZE +#define CONFIG_SYS_BARGSIZE 512 +#endif + static const table_entry_t uimage_arch[] = { { IH_ARCH_INVALID, NULL, "Invalid ARCH", }, { IH_ARCH_ALPHA, "alpha", "Alpha", }, @@ -97,6 +95,7 @@ static const table_entry_t uimage_arch[] = { { IH_ARCH_AVR32, "avr32", "AVR32", }, { IH_ARCH_NDS32, "nds32", "NDS32", }, { IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",}, + { IH_ARCH_SANDBOX, "sandbox", "Sandbox", }, { -1, "", "", }, }; @@ -163,10 +162,6 @@ static const table_entry_t uimage_comp[] = { { -1, "", "", }, }; -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) -static void genimg_print_time(time_t timestamp); -#endif - /*****************************************************************************/ /* Legacy format routines */ /*****************************************************************************/ @@ -305,17 +300,12 @@ void image_print_contents(const void *ptr) const image_header_t *hdr = (const image_header_t *)ptr; const char *p; -#ifdef USE_HOSTCC - p = ""; -#else - p = " "; -#endif - + p = IMAGE_INDENT_STRING; printf("%sImage Name: %.*s\n", p, IH_NMLEN, image_get_name(hdr)); -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) - printf("%sCreated: ", p); - genimg_print_time((time_t)image_get_time(hdr)); -#endif + if (IMAGE_ENABLE_TIMESTAMP) { + printf("%sCreated: ", p); + genimg_print_time((time_t)image_get_time(hdr)); + } printf("%sImage Type: ", p); image_print_type(hdr); printf("%sData Size: ", p); @@ -524,8 +514,8 @@ void genimg_print_size(uint32_t size) #endif } -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) -static void genimg_print_time(time_t timestamp) +#if IMAGE_ENABLE_TIMESTAMP +void genimg_print_time(time_t timestamp) { #ifndef USE_HOSTCC struct rtc_time tm; @@ -538,7 +528,7 @@ static void genimg_print_time(time_t timestamp) printf("%s", ctime(×tamp)); #endif } -#endif /* CONFIG_TIMESTAMP || CONFIG_CMD_DATE || USE_HOSTCC */ +#endif /** * get_table_entry_name - translate entry id to long name @@ -672,7 +662,7 @@ int genimg_get_comp_id(const char *name) * returns: * image format type or IMAGE_FORMAT_INVALID if no image is present */ -int genimg_get_format(void *img_addr) +int genimg_get_format(const void *img_addr) { ulong format = IMAGE_FORMAT_INVALID; const image_header_t *hdr; @@ -712,6 +702,8 @@ ulong genimg_get_image(ulong img_addr) ulong h_size, d_size; if (addr_dataflash(img_addr)) { + void *buf; + /* ger RAM address */ ram_addr = CONFIG_SYS_LOAD_ADDR; @@ -726,20 +718,20 @@ ulong genimg_get_image(ulong img_addr) debug(" Reading image header from dataflash address " "%08lx to RAM address %08lx\n", img_addr, ram_addr); - read_dataflash(img_addr, h_size, (char *)ram_addr); + buf = map_sysmem(ram_addr, 0); + read_dataflash(img_addr, h_size, buf); /* get data size */ - switch (genimg_get_format((void *)ram_addr)) { + switch (genimg_get_format(buf)) { case IMAGE_FORMAT_LEGACY: - d_size = image_get_data_size( - (const image_header_t *)ram_addr); + d_size = image_get_data_size(buf); debug(" Legacy format image found at 0x%08lx, " "size 0x%08lx\n", ram_addr, d_size); break; #if defined(CONFIG_FIT) case IMAGE_FORMAT_FIT: - d_size = fit_get_size((const void *)ram_addr) - h_size; + d_size = fit_get_size(buf) - h_size; debug(" FIT/FDT format image found at 0x%08lx, " "size 0x%08lx\n", ram_addr, d_size); @@ -757,7 +749,7 @@ ulong genimg_get_image(ulong img_addr) ram_addr + h_size); read_dataflash(img_addr + h_size, d_size, - (char *)(ram_addr + h_size)); + (char *)(buf + h_size)); } #endif /* CONFIG_HAS_DATAFLASH */ @@ -813,6 +805,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, ulong rd_addr, rd_load; ulong rd_data, rd_len; const image_header_t *rd_hdr; + void *buf; #ifdef CONFIG_SUPPORT_RAW_INITRD char *end; #endif @@ -874,7 +867,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, /* use FIT configuration provided in first bootm * command argument */ - rd_addr = (ulong)images->fit_hdr_os; + rd_addr = map_to_sysmem(images->fit_hdr_os); fit_uname_config = images->fit_uname_cfg; debug("* ramdisk: using config '%s' from image " "at 0x%08lx\n", @@ -884,7 +877,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, * Check whether configuration has ramdisk defined, * if not, don't try to use it, quit silently. */ - fit_hdr = (void *)rd_addr; + fit_hdr = images->fit_hdr_os; cfg_noffset = fit_conf_get_node(fit_hdr, fit_uname_config); if (cfg_noffset < 0) { @@ -909,7 +902,8 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, * address provided in the second bootm argument * check image type, for FIT images get FIT node. */ - switch (genimg_get_format((void *)rd_addr)) { + buf = map_sysmem(rd_addr, 0); + switch (genimg_get_format(buf)) { case IMAGE_FORMAT_LEGACY: printf("## Loading init Ramdisk from Legacy " "Image at %08lx ...\n", rd_addr); @@ -927,7 +921,7 @@ int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, break; #if defined(CONFIG_FIT) case IMAGE_FORMAT_FIT: - fit_hdr = (void *)rd_addr; + fit_hdr = buf; printf("## Loading init Ramdisk from FIT " "Image at %08lx ...\n", rd_addr); @@ -1160,570 +1154,6 @@ error: } #endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ -#ifdef CONFIG_OF_LIBFDT -static void fdt_error(const char *msg) -{ - puts("ERROR: "); - puts(msg); - puts(" - must RESET the board to recover.\n"); -} - -static const image_header_t *image_get_fdt(ulong fdt_addr) -{ - const image_header_t *fdt_hdr = (const image_header_t *)fdt_addr; - - image_print_contents(fdt_hdr); - - puts(" Verifying Checksum ... "); - if (!image_check_hcrc(fdt_hdr)) { - fdt_error("fdt header checksum invalid"); - return NULL; - } - - if (!image_check_dcrc(fdt_hdr)) { - fdt_error("fdt checksum invalid"); - return NULL; - } - puts("OK\n"); - - if (!image_check_type(fdt_hdr, IH_TYPE_FLATDT)) { - fdt_error("uImage is not a fdt"); - return NULL; - } - if (image_get_comp(fdt_hdr) != IH_COMP_NONE) { - fdt_error("uImage is compressed"); - return NULL; - } - if (fdt_check_header((char *)image_get_data(fdt_hdr)) != 0) { - fdt_error("uImage data is not a fdt"); - return NULL; - } - return fdt_hdr; -} - -/** - * fit_check_fdt - verify FIT format FDT subimage - * @fit_hdr: pointer to the FIT header - * fdt_noffset: FDT subimage node offset within FIT image - * @verify: data CRC verification flag - * - * fit_check_fdt() verifies integrity of the FDT subimage and from - * specified FIT image. - * - * returns: - * 1, on success - * 0, on failure - */ -#if defined(CONFIG_FIT) -static int fit_check_fdt(const void *fit, int fdt_noffset, int verify) -{ - fit_image_print(fit, fdt_noffset, " "); - - if (verify) { - puts(" Verifying Hash Integrity ... "); - if (!fit_image_check_hashes(fit, fdt_noffset)) { - fdt_error("Bad Data Hash"); - return 0; - } - puts("OK\n"); - } - - if (!fit_image_check_type(fit, fdt_noffset, IH_TYPE_FLATDT)) { - fdt_error("Not a FDT image"); - return 0; - } - - if (!fit_image_check_comp(fit, fdt_noffset, IH_COMP_NONE)) { - fdt_error("FDT image is compressed"); - return 0; - } - - return 1; -} -#endif /* CONFIG_FIT */ - -#ifndef CONFIG_SYS_FDT_PAD -#define CONFIG_SYS_FDT_PAD 0x3000 -#endif - -#if defined(CONFIG_OF_LIBFDT) -/** - * boot_fdt_add_mem_rsv_regions - Mark the memreserve sections as unusable - * @lmb: pointer to lmb handle, will be used for memory mgmt - * @fdt_blob: pointer to fdt blob base address - * - * Adds the memreserve regions in the dtb to the lmb block. Adding the - * memreserve regions prevents u-boot from using them to store the initrd - * or the fdt blob. - */ -void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) -{ - uint64_t addr, size; - int i, total; - - if (fdt_check_header(fdt_blob) != 0) - return; - - total = fdt_num_mem_rsv(fdt_blob); - for (i = 0; i < total; i++) { - if (fdt_get_mem_rsv(fdt_blob, i, &addr, &size) != 0) - continue; - printf(" reserving fdt memory region: addr=%llx size=%llx\n", - (unsigned long long)addr, (unsigned long long)size); - lmb_reserve(lmb, addr, size); - } -} - -/** - * boot_relocate_fdt - relocate flat device tree - * @lmb: pointer to lmb handle, will be used for memory mgmt - * @of_flat_tree: pointer to a char* variable, will hold fdt start address - * @of_size: pointer to a ulong variable, will hold fdt length - * - * boot_relocate_fdt() allocates a region of memory within the bootmap and - * relocates the of_flat_tree into that region, even if the fdt is already in - * the bootmap. It also expands the size of the fdt by CONFIG_SYS_FDT_PAD - * bytes. - * - * of_flat_tree and of_size are set to final (after relocation) values - * - * returns: - * 0 - success - * 1 - failure - */ -int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) -{ - void *fdt_blob = *of_flat_tree; - void *of_start = NULL; - char *fdt_high; - ulong of_len = 0; - int err; - int disable_relocation = 0; - - /* nothing to do */ - if (*of_size == 0) - return 0; - - if (fdt_check_header(fdt_blob) != 0) { - fdt_error("image is not a fdt"); - goto error; - } - - /* position on a 4K boundary before the alloc_current */ - /* Pad the FDT by a specified amount */ - of_len = *of_size + CONFIG_SYS_FDT_PAD; - - /* If fdt_high is set use it to select the relocation address */ - fdt_high = getenv("fdt_high"); - if (fdt_high) { - void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16); - - if (((ulong) desired_addr) == ~0UL) { - /* All ones means use fdt in place */ - of_start = fdt_blob; - lmb_reserve(lmb, (ulong)of_start, of_len); - disable_relocation = 1; - } else if (desired_addr) { - of_start = - (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, - (ulong)desired_addr); - if (of_start == NULL) { - puts("Failed using fdt_high value for Device Tree"); - goto error; - } - } else { - of_start = - (void *)(ulong) lmb_alloc(lmb, of_len, 0x1000); - } - } else { - of_start = - (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, - getenv_bootm_mapsize() - + getenv_bootm_low()); - } - - if (of_start == NULL) { - puts("device tree - allocation error\n"); - goto error; - } - - if (disable_relocation) { - /* We assume there is space after the existing fdt to use for padding */ - fdt_set_totalsize(of_start, of_len); - printf(" Using Device Tree in place at %p, end %p\n", - of_start, of_start + of_len - 1); - } else { - debug("## device tree at %p ... %p (len=%ld [0x%lX])\n", - fdt_blob, fdt_blob + *of_size - 1, of_len, of_len); - - printf(" Loading Device Tree to %p, end %p ... ", - of_start, of_start + of_len - 1); - - err = fdt_open_into(fdt_blob, of_start, of_len); - if (err != 0) { - fdt_error("fdt move failed"); - goto error; - } - puts("OK\n"); - } - - *of_flat_tree = of_start; - *of_size = of_len; - - set_working_fdt_addr(*of_flat_tree); - return 0; - -error: - return 1; -} -#endif /* CONFIG_OF_LIBFDT */ - -/** - * boot_get_fdt - main fdt handling routine - * @argc: command argument count - * @argv: command argument list - * @images: pointer to the bootm images structure - * @of_flat_tree: pointer to a char* variable, will hold fdt start address - * @of_size: pointer to a ulong variable, will hold fdt length - * - * boot_get_fdt() is responsible for finding a valid flat device tree image. - * Curently supported are the following ramdisk sources: - * - multicomponent kernel/ramdisk image, - * - commandline provided address of decicated ramdisk image. - * - * returns: - * 0, if fdt image was found and valid, or skipped - * of_flat_tree and of_size are set to fdt start address and length if - * fdt image is found and valid - * - * 1, if fdt image is found but corrupted - * of_flat_tree and of_size are set to 0 if no fdt exists - */ -int boot_get_fdt(int flag, int argc, char * const argv[], - bootm_headers_t *images, char **of_flat_tree, ulong *of_size) -{ - const image_header_t *fdt_hdr; - ulong fdt_addr; - char *fdt_blob = NULL; - ulong image_start, image_data, image_end; - ulong load_start, load_end; -#if defined(CONFIG_FIT) - void *fit_hdr; - const char *fit_uname_config = NULL; - const char *fit_uname_fdt = NULL; - ulong default_addr; - int cfg_noffset; - int fdt_noffset; - const void *data; - size_t size; -#endif - - *of_flat_tree = NULL; - *of_size = 0; - - if (argc > 3 || genimg_has_config(images)) { -#if defined(CONFIG_FIT) - if (argc > 3) { - /* - * If the FDT blob comes from the FIT image and the - * FIT image address is omitted in the command line - * argument, try to use ramdisk or os FIT image - * address or default load address. - */ - if (images->fit_uname_rd) - default_addr = (ulong)images->fit_hdr_rd; - else if (images->fit_uname_os) - default_addr = (ulong)images->fit_hdr_os; - else - default_addr = load_addr; - - if (fit_parse_conf(argv[3], default_addr, - &fdt_addr, &fit_uname_config)) { - debug("* fdt: config '%s' from image at " - "0x%08lx\n", - fit_uname_config, fdt_addr); - } else if (fit_parse_subimage(argv[3], default_addr, - &fdt_addr, &fit_uname_fdt)) { - debug("* fdt: subimage '%s' from image at " - "0x%08lx\n", - fit_uname_fdt, fdt_addr); - } else -#endif - { - fdt_addr = simple_strtoul(argv[3], NULL, 16); - debug("* fdt: cmdline image address = " - "0x%08lx\n", - fdt_addr); - } -#if defined(CONFIG_FIT) - } else { - /* use FIT configuration provided in first bootm - * command argument - */ - fdt_addr = (ulong)images->fit_hdr_os; - fit_uname_config = images->fit_uname_cfg; - debug("* fdt: using config '%s' from image " - "at 0x%08lx\n", - fit_uname_config, fdt_addr); - - /* - * Check whether configuration has FDT blob defined, - * if not quit silently. - */ - fit_hdr = (void *)fdt_addr; - cfg_noffset = fit_conf_get_node(fit_hdr, - fit_uname_config); - if (cfg_noffset < 0) { - debug("* fdt: no such config\n"); - return 0; - } - - fdt_noffset = fit_conf_get_fdt_node(fit_hdr, - cfg_noffset); - if (fdt_noffset < 0) { - debug("* fdt: no fdt in config\n"); - return 0; - } - } -#endif - - debug("## Checking for 'FDT'/'FDT Image' at %08lx\n", - fdt_addr); - - /* copy from dataflash if needed */ - fdt_addr = genimg_get_image(fdt_addr); - - /* - * Check if there is an FDT image at the - * address provided in the second bootm argument - * check image type, for FIT images get a FIT node. - */ - switch (genimg_get_format((void *)fdt_addr)) { - case IMAGE_FORMAT_LEGACY: - /* verify fdt_addr points to a valid image header */ - printf("## Flattened Device Tree from Legacy Image " - "at %08lx\n", - fdt_addr); - fdt_hdr = image_get_fdt(fdt_addr); - if (!fdt_hdr) - goto error; - - /* - * move image data to the load address, - * make sure we don't overwrite initial image - */ - image_start = (ulong)fdt_hdr; - image_data = (ulong)image_get_data(fdt_hdr); - image_end = image_get_image_end(fdt_hdr); - - load_start = image_get_load(fdt_hdr); - load_end = load_start + image_get_data_size(fdt_hdr); - - if (load_start == image_start || - load_start == image_data) { - fdt_blob = (char *)image_data; - break; - } - - if ((load_start < image_end) && (load_end > image_start)) { - fdt_error("fdt overwritten"); - goto error; - } - - debug(" Loading FDT from 0x%08lx to 0x%08lx\n", - image_data, load_start); - - memmove((void *)load_start, - (void *)image_data, - image_get_data_size(fdt_hdr)); - - fdt_blob = (char *)load_start; - break; - case IMAGE_FORMAT_FIT: - /* - * This case will catch both: new uImage format - * (libfdt based) and raw FDT blob (also libfdt - * based). - */ -#if defined(CONFIG_FIT) - /* check FDT blob vs FIT blob */ - if (fit_check_format((const void *)fdt_addr)) { - /* - * FIT image - */ - fit_hdr = (void *)fdt_addr; - printf("## Flattened Device Tree from FIT " - "Image at %08lx\n", - fdt_addr); - - if (!fit_uname_fdt) { - /* - * no FDT blob image node unit name, - * try to get config node first. If - * config unit node name is NULL - * fit_conf_get_node() will try to - * find default config node - */ - cfg_noffset = fit_conf_get_node(fit_hdr, - fit_uname_config); - - if (cfg_noffset < 0) { - fdt_error("Could not find " - "configuration " - "node\n"); - goto error; - } - - fit_uname_config = fdt_get_name(fit_hdr, - cfg_noffset, NULL); - printf(" Using '%s' configuration\n", - fit_uname_config); - - fdt_noffset = fit_conf_get_fdt_node( - fit_hdr, - cfg_noffset); - fit_uname_fdt = fit_get_name(fit_hdr, - fdt_noffset, NULL); - } else { - /* get FDT component image node offset */ - fdt_noffset = fit_image_get_node( - fit_hdr, - fit_uname_fdt); - } - if (fdt_noffset < 0) { - fdt_error("Could not find subimage " - "node\n"); - goto error; - } - - printf(" Trying '%s' FDT blob subimage\n", - fit_uname_fdt); - - if (!fit_check_fdt(fit_hdr, fdt_noffset, - images->verify)) - goto error; - - /* get ramdisk image data address and length */ - if (fit_image_get_data(fit_hdr, fdt_noffset, - &data, &size)) { - fdt_error("Could not find FDT " - "subimage data"); - goto error; - } - - /* verift that image data is a proper FDT blob */ - if (fdt_check_header((char *)data) != 0) { - fdt_error("Subimage data is not a FTD"); - goto error; - } - - /* - * move image data to the load address, - * make sure we don't overwrite initial image - */ - image_start = (ulong)fit_hdr; - image_end = fit_get_end(fit_hdr); - - if (fit_image_get_load(fit_hdr, fdt_noffset, - &load_start) == 0) { - load_end = load_start + size; - - if ((load_start < image_end) && - (load_end > image_start)) { - fdt_error("FDT overwritten"); - goto error; - } - - printf(" Loading FDT from 0x%08lx " - "to 0x%08lx\n", - (ulong)data, - load_start); - - memmove((void *)load_start, - (void *)data, size); - - fdt_blob = (char *)load_start; - } else { - fdt_blob = (char *)data; - } - - images->fit_hdr_fdt = fit_hdr; - images->fit_uname_fdt = fit_uname_fdt; - images->fit_noffset_fdt = fdt_noffset; - break; - } else -#endif - { - /* - * FDT blob - */ - fdt_blob = (char *)fdt_addr; - debug("* fdt: raw FDT blob\n"); - printf("## Flattened Device Tree blob at " - "%08lx\n", (long)fdt_blob); - } - break; - default: - puts("ERROR: Did not find a cmdline Flattened Device " - "Tree\n"); - goto error; - } - - printf(" Booting using the fdt blob at 0x%p\n", fdt_blob); - - } else if (images->legacy_hdr_valid && - image_check_type(&images->legacy_hdr_os_copy, - IH_TYPE_MULTI)) { - - ulong fdt_data, fdt_len; - - /* - * Now check if we have a legacy multi-component image, - * get second entry data start address and len. - */ - printf("## Flattened Device Tree from multi " - "component Image at %08lX\n", - (ulong)images->legacy_hdr_os); - - image_multi_getimg(images->legacy_hdr_os, 2, &fdt_data, - &fdt_len); - if (fdt_len) { - - fdt_blob = (char *)fdt_data; - printf(" Booting using the fdt at 0x%p\n", fdt_blob); - - if (fdt_check_header(fdt_blob) != 0) { - fdt_error("image is not a fdt"); - goto error; - } - - if (fdt_totalsize(fdt_blob) != fdt_len) { - fdt_error("fdt size != image size"); - goto error; - } - } else { - debug("## No Flattened Device Tree\n"); - return 0; - } - } else { - debug("## No Flattened Device Tree\n"); - return 0; - } - - *of_flat_tree = fdt_blob; - *of_size = fdt_totalsize(fdt_blob); - debug(" of_flat_tree at 0x%08lx size 0x%08lx\n", - (ulong)*of_flat_tree, *of_size); - - return 0; - -error: - *of_flat_tree = NULL; - *of_size = 0; - return 1; -} -#endif /* CONFIG_OF_LIBFDT */ - #ifdef CONFIG_SYS_BOOT_GET_CMDLINE /** * boot_get_cmdline - allocate and initialize kernel cmdline @@ -1797,1608 +1227,50 @@ int boot_get_kbd(struct lmb *lmb, bd_t **kbd) return 0; } #endif /* CONFIG_SYS_BOOT_GET_KBD */ -#endif /* !USE_HOSTCC */ -#if defined(CONFIG_FIT) -/*****************************************************************************/ -/* New uImage format routines */ -/*****************************************************************************/ -#ifndef USE_HOSTCC -static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr, - ulong *addr, const char **name) +#ifdef CONFIG_LMB +int image_setup_linux(bootm_headers_t *images) { - const char *sep; - - *addr = addr_curr; - *name = NULL; - - sep = strchr(spec, sepc); - if (sep) { - if (sep - spec > 0) - *addr = simple_strtoul(spec, NULL, 16); - - *name = sep + 1; - return 1; - } - - return 0; -} - -/** - * fit_parse_conf - parse FIT configuration spec - * @spec: input string, containing configuration spec - * @add_curr: current image address (to be used as a possible default) - * @addr: pointer to a ulong variable, will hold FIT image address of a given - * configuration - * @conf_name double pointer to a char, will hold pointer to a configuration - * unit name - * - * fit_parse_conf() expects configuration spec in the for of [<addr>]#<conf>, - * where <addr> is a FIT image address that contains configuration - * with a <conf> unit name. - * - * Address part is optional, and if omitted default add_curr will - * be used instead. - * - * returns: - * 1 if spec is a valid configuration string, - * addr and conf_name are set accordingly - * 0 otherwise - */ -int fit_parse_conf(const char *spec, ulong addr_curr, - ulong *addr, const char **conf_name) -{ - return fit_parse_spec(spec, '#', addr_curr, addr, conf_name); -} - -/** - * fit_parse_subimage - parse FIT subimage spec - * @spec: input string, containing subimage spec - * @add_curr: current image address (to be used as a possible default) - * @addr: pointer to a ulong variable, will hold FIT image address of a given - * subimage - * @image_name: double pointer to a char, will hold pointer to a subimage name - * - * fit_parse_subimage() expects subimage spec in the for of - * [<addr>]:<subimage>, where <addr> is a FIT image address that contains - * subimage with a <subimg> unit name. - * - * Address part is optional, and if omitted default add_curr will - * be used instead. - * - * returns: - * 1 if spec is a valid subimage string, - * addr and image_name are set accordingly - * 0 otherwise - */ -int fit_parse_subimage(const char *spec, ulong addr_curr, - ulong *addr, const char **image_name) -{ - return fit_parse_spec(spec, ':', addr_curr, addr, image_name); -} -#endif /* !USE_HOSTCC */ - -static void fit_get_debug(const void *fit, int noffset, - char *prop_name, int err) -{ - debug("Can't get '%s' property from FIT 0x%08lx, " - "node: offset %d, name %s (%s)\n", - prop_name, (ulong)fit, noffset, - fit_get_name(fit, noffset, NULL), - fdt_strerror(err)); -} - -/** - * fit_print_contents - prints out the contents of the FIT format image - * @fit: pointer to the FIT format image header - * @p: pointer to prefix string - * - * fit_print_contents() formats a multi line FIT image contents description. - * The routine prints out FIT image properties (root node level) follwed by - * the details of each component image. - * - * returns: - * no returned results - */ -void fit_print_contents(const void *fit) -{ - char *desc; - char *uname; - int images_noffset; - int confs_noffset; - int noffset; - int ndepth; - int count = 0; + ulong of_size = images->ft_len; + char **of_flat_tree = &images->ft_addr; + ulong *initrd_start = &images->initrd_start; + ulong *initrd_end = &images->initrd_end; + struct lmb *lmb = &images->lmb; + ulong rd_len; int ret; - const char *p; -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) - time_t timestamp; -#endif -#ifdef USE_HOSTCC - p = ""; -#else - p = " "; -#endif + if (IMAGE_ENABLE_OF_LIBFDT) + boot_fdt_add_mem_rsv_regions(lmb, *of_flat_tree); - /* Root node properties */ - ret = fit_get_desc(fit, 0, &desc); - printf("%sFIT description: ", p); - if (ret) - printf("unavailable\n"); - else - printf("%s\n", desc); - -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) - ret = fit_get_timestamp(fit, 0, ×tamp); - printf("%sCreated: ", p); - if (ret) - printf("unavailable\n"); - else - genimg_print_time(timestamp); -#endif - - /* Find images parent node offset */ - images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); - if (images_noffset < 0) { - printf("Can't find images parent node '%s' (%s)\n", - FIT_IMAGES_PATH, fdt_strerror(images_noffset)); - return; - } - - /* Process its subnodes, print out component images details */ - for (ndepth = 0, count = 0, - noffset = fdt_next_node(fit, images_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* - * Direct child node of the images parent node, - * i.e. component image node. - */ - printf("%s Image %u (%s)\n", p, count++, - fit_get_name(fit, noffset, NULL)); - - fit_image_print(fit, noffset, p); - } - } - - /* Find configurations parent node offset */ - confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); - if (confs_noffset < 0) { - debug("Can't get configurations parent node '%s' (%s)\n", - FIT_CONFS_PATH, fdt_strerror(confs_noffset)); - return; - } - - /* get default configuration unit name from default property */ - uname = (char *)fdt_getprop(fit, noffset, FIT_DEFAULT_PROP, NULL); - if (uname) - printf("%s Default Configuration: '%s'\n", p, uname); - - /* Process its subnodes, print out configurations details */ - for (ndepth = 0, count = 0, - noffset = fdt_next_node(fit, confs_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* - * Direct child node of the configurations parent node, - * i.e. configuration node. - */ - printf("%s Configuration %u (%s)\n", p, count++, - fit_get_name(fit, noffset, NULL)); - - fit_conf_print(fit, noffset, p); + if (IMAGE_BOOT_GET_CMDLINE) { + ret = boot_get_cmdline(lmb, &images->cmdline_start, + &images->cmdline_end); + if (ret) { + puts("ERROR with allocation of cmdline\n"); + return ret; } } -} - -/** - * fit_image_print - prints out the FIT component image details - * @fit: pointer to the FIT format image header - * @image_noffset: offset of the component image node - * @p: pointer to prefix string - * - * fit_image_print() lists all mandatory properies for the processed component - * image. If present, hash nodes are printed out as well. Load - * address for images of type firmware is also printed out. Since the load - * address is not mandatory for firmware images, it will be output as - * "unavailable" when not present. - * - * returns: - * no returned results - */ -void fit_image_print(const void *fit, int image_noffset, const char *p) -{ - char *desc; - uint8_t type, arch, os, comp; - size_t size; - ulong load, entry; - const void *data; - int noffset; - int ndepth; - int ret; - - /* Mandatory properties */ - ret = fit_get_desc(fit, image_noffset, &desc); - printf("%s Description: ", p); - if (ret) - printf("unavailable\n"); - else - printf("%s\n", desc); - - fit_image_get_type(fit, image_noffset, &type); - printf("%s Type: %s\n", p, genimg_get_type_name(type)); - - fit_image_get_comp(fit, image_noffset, &comp); - printf("%s Compression: %s\n", p, genimg_get_comp_name(comp)); - - ret = fit_image_get_data(fit, image_noffset, &data, &size); - -#ifndef USE_HOSTCC - printf("%s Data Start: ", p); - if (ret) - printf("unavailable\n"); - else - printf("0x%08lx\n", (ulong)data); -#endif - - printf("%s Data Size: ", p); - if (ret) - printf("unavailable\n"); - else - genimg_print_size(size); - - /* Remaining, type dependent properties */ - if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || - (type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) || - (type == IH_TYPE_FLATDT)) { - fit_image_get_arch(fit, image_noffset, &arch); - printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch)); - } - - if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) { - fit_image_get_os(fit, image_noffset, &os); - printf("%s OS: %s\n", p, genimg_get_os_name(os)); - } - - if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || - (type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) { - ret = fit_image_get_load(fit, image_noffset, &load); - printf("%s Load Address: ", p); + if (IMAGE_ENABLE_RAMDISK_HIGH) { + rd_len = images->rd_end - images->rd_start; + ret = boot_ramdisk_high(lmb, images->rd_start, rd_len, + initrd_start, initrd_end); if (ret) - printf("unavailable\n"); - else - printf("0x%08lx\n", load); + return ret; } - if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) || - (type == IH_TYPE_RAMDISK)) { - fit_image_get_entry(fit, image_noffset, &entry); - printf("%s Entry Point: ", p); + if (IMAGE_ENABLE_OF_LIBFDT) { + ret = boot_relocate_fdt(lmb, of_flat_tree, &of_size); if (ret) - printf("unavailable\n"); - else - printf("0x%08lx\n", entry); - } - - /* Process all hash subnodes of the component image node */ - for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* Direct child node of the component image node */ - fit_image_print_hash(fit, noffset, p); - } - } -} - -/** - * fit_image_print_hash - prints out the hash node details - * @fit: pointer to the FIT format image header - * @noffset: offset of the hash node - * @p: pointer to prefix string - * - * fit_image_print_hash() lists properies for the processed hash node - * - * returns: - * no returned results - */ -void fit_image_print_hash(const void *fit, int noffset, const char *p) -{ - char *algo; - uint8_t *value; - int value_len; - int i, ret; - - /* - * Check subnode name, must be equal to "hash". - * Multiple hash nodes require unique unit node - * names, e.g. hash@1, hash@2, etc. - */ - if (strncmp(fit_get_name(fit, noffset, NULL), - FIT_HASH_NODENAME, - strlen(FIT_HASH_NODENAME)) != 0) - return; - - debug("%s Hash node: '%s'\n", p, - fit_get_name(fit, noffset, NULL)); - - printf("%s Hash algo: ", p); - if (fit_image_hash_get_algo(fit, noffset, &algo)) { - printf("invalid/unsupported\n"); - return; - } - printf("%s\n", algo); - - ret = fit_image_hash_get_value(fit, noffset, &value, - &value_len); - printf("%s Hash value: ", p); - if (ret) { - printf("unavailable\n"); - } else { - for (i = 0; i < value_len; i++) - printf("%02x", value[i]); - printf("\n"); - } - - debug("%s Hash len: %d\n", p, value_len); -} - -/** - * fit_get_desc - get node description property - * @fit: pointer to the FIT format image header - * @noffset: node offset - * @desc: double pointer to the char, will hold pointer to the descrption - * - * fit_get_desc() reads description property from a given node, if - * description is found pointer to it is returened in third call argument. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_get_desc(const void *fit, int noffset, char **desc) -{ - int len; - - *desc = (char *)fdt_getprop(fit, noffset, FIT_DESC_PROP, &len); - if (*desc == NULL) { - fit_get_debug(fit, noffset, FIT_DESC_PROP, len); - return -1; - } - - return 0; -} - -/** - * fit_get_timestamp - get node timestamp property - * @fit: pointer to the FIT format image header - * @noffset: node offset - * @timestamp: pointer to the time_t, will hold read timestamp - * - * fit_get_timestamp() reads timestamp poperty from given node, if timestamp - * is found and has a correct size its value is retured in third call - * argument. - * - * returns: - * 0, on success - * -1, on property read failure - * -2, on wrong timestamp size - */ -int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp) -{ - int len; - const void *data; - - data = fdt_getprop(fit, noffset, FIT_TIMESTAMP_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_TIMESTAMP_PROP, len); - return -1; - } - if (len != sizeof(uint32_t)) { - debug("FIT timestamp with incorrect size of (%u)\n", len); - return -2; - } - - *timestamp = uimage_to_cpu(*((uint32_t *)data)); - return 0; -} - -/** - * fit_image_get_node - get node offset for component image of a given unit name - * @fit: pointer to the FIT format image header - * @image_uname: component image node unit name - * - * fit_image_get_node() finds a component image (withing the '/images' - * node) of a provided unit name. If image is found its node offset is - * returned to the caller. - * - * returns: - * image node offset when found (>=0) - * negative number on failure (FDT_ERR_* code) - */ -int fit_image_get_node(const void *fit, const char *image_uname) -{ - int noffset, images_noffset; - - images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); - if (images_noffset < 0) { - debug("Can't find images parent node '%s' (%s)\n", - FIT_IMAGES_PATH, fdt_strerror(images_noffset)); - return images_noffset; - } - - noffset = fdt_subnode_offset(fit, images_noffset, image_uname); - if (noffset < 0) { - debug("Can't get node offset for image unit name: '%s' (%s)\n", - image_uname, fdt_strerror(noffset)); - } - - return noffset; -} - -/** - * fit_image_get_os - get os id for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @os: pointer to the uint8_t, will hold os numeric id - * - * fit_image_get_os() finds os property in a given component image node. - * If the property is found, its (string) value is translated to the numeric - * id which is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_os(const void *fit, int noffset, uint8_t *os) -{ - int len; - const void *data; - - /* Get OS name from property data */ - data = fdt_getprop(fit, noffset, FIT_OS_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_OS_PROP, len); - *os = -1; - return -1; - } - - /* Translate OS name to id */ - *os = genimg_get_os_id(data); - return 0; -} - -/** - * fit_image_get_arch - get arch id for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @arch: pointer to the uint8_t, will hold arch numeric id - * - * fit_image_get_arch() finds arch property in a given component image node. - * If the property is found, its (string) value is translated to the numeric - * id which is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch) -{ - int len; - const void *data; - - /* Get architecture name from property data */ - data = fdt_getprop(fit, noffset, FIT_ARCH_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_ARCH_PROP, len); - *arch = -1; - return -1; - } - - /* Translate architecture name to id */ - *arch = genimg_get_arch_id(data); - return 0; -} - -/** - * fit_image_get_type - get type id for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @type: pointer to the uint8_t, will hold type numeric id - * - * fit_image_get_type() finds type property in a given component image node. - * If the property is found, its (string) value is translated to the numeric - * id which is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_type(const void *fit, int noffset, uint8_t *type) -{ - int len; - const void *data; - - /* Get image type name from property data */ - data = fdt_getprop(fit, noffset, FIT_TYPE_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_TYPE_PROP, len); - *type = -1; - return -1; - } - - /* Translate image type name to id */ - *type = genimg_get_type_id(data); - return 0; -} - -/** - * fit_image_get_comp - get comp id for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @comp: pointer to the uint8_t, will hold comp numeric id - * - * fit_image_get_comp() finds comp property in a given component image node. - * If the property is found, its (string) value is translated to the numeric - * id which is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp) -{ - int len; - const void *data; - - /* Get compression name from property data */ - data = fdt_getprop(fit, noffset, FIT_COMP_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_COMP_PROP, len); - *comp = -1; - return -1; - } - - /* Translate compression name to id */ - *comp = genimg_get_comp_id(data); - return 0; -} - -/** - * fit_image_get_load - get load address property for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @load: pointer to the uint32_t, will hold load address - * - * fit_image_get_load() finds load address property in a given component image node. - * If the property is found, its value is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_load(const void *fit, int noffset, ulong *load) -{ - int len; - const uint32_t *data; - - data = fdt_getprop(fit, noffset, FIT_LOAD_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_LOAD_PROP, len); - return -1; - } - - *load = uimage_to_cpu(*data); - return 0; -} - -/** - * fit_image_get_entry - get entry point address property for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @entry: pointer to the uint32_t, will hold entry point address - * - * fit_image_get_entry() finds entry point address property in a given component image node. - * If the property is found, its value is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_entry(const void *fit, int noffset, ulong *entry) -{ - int len; - const uint32_t *data; - - data = fdt_getprop(fit, noffset, FIT_ENTRY_PROP, &len); - if (data == NULL) { - fit_get_debug(fit, noffset, FIT_ENTRY_PROP, len); - return -1; - } - - *entry = uimage_to_cpu(*data); - return 0; -} - -/** - * fit_image_get_data - get data property and its size for a given component image node - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @data: double pointer to void, will hold data property's data address - * @size: pointer to size_t, will hold data property's data size - * - * fit_image_get_data() finds data property in a given component image node. - * If the property is found its data start address and size are returned to - * the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_get_data(const void *fit, int noffset, - const void **data, size_t *size) -{ - int len; - - *data = fdt_getprop(fit, noffset, FIT_DATA_PROP, &len); - if (*data == NULL) { - fit_get_debug(fit, noffset, FIT_DATA_PROP, len); - *size = 0; - return -1; - } - - *size = len; - return 0; -} - -/** - * fit_image_hash_get_algo - get hash algorithm name - * @fit: pointer to the FIT format image header - * @noffset: hash node offset - * @algo: double pointer to char, will hold pointer to the algorithm name - * - * fit_image_hash_get_algo() finds hash algorithm property in a given hash node. - * If the property is found its data start address is returned to the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_hash_get_algo(const void *fit, int noffset, char **algo) -{ - int len; - - *algo = (char *)fdt_getprop(fit, noffset, FIT_ALGO_PROP, &len); - if (*algo == NULL) { - fit_get_debug(fit, noffset, FIT_ALGO_PROP, len); - return -1; - } - - return 0; -} - -/** - * fit_image_hash_get_value - get hash value and length - * @fit: pointer to the FIT format image header - * @noffset: hash node offset - * @value: double pointer to uint8_t, will hold address of a hash value data - * @value_len: pointer to an int, will hold hash data length - * - * fit_image_hash_get_value() finds hash value property in a given hash node. - * If the property is found its data start address and size are returned to - * the caller. - * - * returns: - * 0, on success - * -1, on failure - */ -int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, - int *value_len) -{ - int len; - - *value = (uint8_t *)fdt_getprop(fit, noffset, FIT_VALUE_PROP, &len); - if (*value == NULL) { - fit_get_debug(fit, noffset, FIT_VALUE_PROP, len); - *value_len = 0; - return -1; - } - - *value_len = len; - return 0; -} - -#ifndef USE_HOSTCC -/** - * fit_image_hash_get_ignore - get hash ignore flag - * @fit: pointer to the FIT format image header - * @noffset: hash node offset - * @ignore: pointer to an int, will hold hash ignore flag - * - * fit_image_hash_get_ignore() finds hash ignore property in a given hash node. - * If the property is found and non-zero, the hash algorithm is not verified by - * u-boot automatically. - * - * returns: - * 0, on ignore not found - * value, on ignore found - */ -int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore) -{ - int len; - int *value; - - value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len); - if (value == NULL || len != sizeof(int)) - *ignore = 0; - else - *ignore = *value; - - return 0; -} -#endif - -/** - * fit_set_timestamp - set node timestamp property - * @fit: pointer to the FIT format image header - * @noffset: node offset - * @timestamp: timestamp value to be set - * - * fit_set_timestamp() attempts to set timestamp property in the requested - * node and returns operation status to the caller. - * - * returns: - * 0, on success - * -1, on property read failure - */ -int fit_set_timestamp(void *fit, int noffset, time_t timestamp) -{ - uint32_t t; - int ret; - - t = cpu_to_uimage(timestamp); - ret = fdt_setprop(fit, noffset, FIT_TIMESTAMP_PROP, &t, - sizeof(uint32_t)); - if (ret) { - printf("Can't set '%s' property for '%s' node (%s)\n", - FIT_TIMESTAMP_PROP, fit_get_name(fit, noffset, NULL), - fdt_strerror(ret)); - return -1; - } - - return 0; -} - -/** - * calculate_hash - calculate and return hash for provided input data - * @data: pointer to the input data - * @data_len: data length - * @algo: requested hash algorithm - * @value: pointer to the char, will hold hash value data (caller must - * allocate enough free space) - * value_len: length of the calculated hash - * - * calculate_hash() computes input data hash according to the requested algorithm. - * Resulting hash value is placed in caller provided 'value' buffer, length - * of the calculated hash is returned via value_len pointer argument. - * - * returns: - * 0, on success - * -1, when algo is unsupported - */ -static int calculate_hash(const void *data, int data_len, const char *algo, - uint8_t *value, int *value_len) -{ - if (strcmp(algo, "crc32") == 0) { - *((uint32_t *)value) = crc32_wd(0, data, data_len, - CHUNKSZ_CRC32); - *((uint32_t *)value) = cpu_to_uimage(*((uint32_t *)value)); - *value_len = 4; - } else if (strcmp(algo, "sha1") == 0) { - sha1_csum_wd((unsigned char *) data, data_len, - (unsigned char *) value, CHUNKSZ_SHA1); - *value_len = 20; - } else if (strcmp(algo, "md5") == 0) { - md5_wd((unsigned char *)data, data_len, value, CHUNKSZ_MD5); - *value_len = 16; - } else { - debug("Unsupported hash alogrithm\n"); - return -1; - } - return 0; -} - -#ifdef USE_HOSTCC -/** - * fit_set_hashes - process FIT component image nodes and calculate hashes - * @fit: pointer to the FIT format image header - * - * fit_set_hashes() adds hash values for all component images in the FIT blob. - * Hashes are calculated for all component images which have hash subnodes - * with algorithm property set to one of the supported hash algorithms. - * - * returns - * 0, on success - * libfdt error code, on failure - */ -int fit_set_hashes(void *fit) -{ - int images_noffset; - int noffset; - int ndepth; - int ret; - - /* Find images parent node offset */ - images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); - if (images_noffset < 0) { - printf("Can't find images parent node '%s' (%s)\n", - FIT_IMAGES_PATH, fdt_strerror(images_noffset)); - return images_noffset; - } - - /* Process its subnodes, print out component images details */ - for (ndepth = 0, noffset = fdt_next_node(fit, images_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* - * Direct child node of the images parent node, - * i.e. component image node. - */ - ret = fit_image_set_hashes(fit, noffset); - if (ret) - return ret; - } - } - - return 0; -} - -/** - * fit_image_set_hashes - calculate/set hashes for given component image node - * @fit: pointer to the FIT format image header - * @image_noffset: requested component image node - * - * fit_image_set_hashes() adds hash values for an component image node. All - * existing hash subnodes are checked, if algorithm property is set to one of - * the supported hash algorithms, hash value is computed and corresponding - * hash node property is set, for example: - * - * Input component image node structure: - * - * o image@1 (at image_noffset) - * | - data = [binary data] - * o hash@1 - * |- algo = "sha1" - * - * Output component image node structure: - * - * o image@1 (at image_noffset) - * | - data = [binary data] - * o hash@1 - * |- algo = "sha1" - * |- value = sha1(data) - * - * returns: - * 0 on sucess - * <0 on failure - */ -int fit_image_set_hashes(void *fit, int image_noffset) -{ - const void *data; - size_t size; - char *algo; - uint8_t value[FIT_MAX_HASH_LEN]; - int value_len; - int noffset; - int ndepth; - - /* Get image data and data length */ - if (fit_image_get_data(fit, image_noffset, &data, &size)) { - printf("Can't get image data/size\n"); - return -1; - } - - /* Process all hash subnodes of the component image node */ - for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* Direct child node of the component image node */ - - /* - * Check subnode name, must be equal to "hash". - * Multiple hash nodes require unique unit node - * names, e.g. hash@1, hash@2, etc. - */ - if (strncmp(fit_get_name(fit, noffset, NULL), - FIT_HASH_NODENAME, - strlen(FIT_HASH_NODENAME)) != 0) { - /* Not a hash subnode, skip it */ - continue; - } - - if (fit_image_hash_get_algo(fit, noffset, &algo)) { - printf("Can't get hash algo property for " - "'%s' hash node in '%s' image node\n", - fit_get_name(fit, noffset, NULL), - fit_get_name(fit, image_noffset, NULL)); - return -1; - } - - if (calculate_hash(data, size, algo, value, - &value_len)) { - printf("Unsupported hash algorithm (%s) for " - "'%s' hash node in '%s' image node\n", - algo, fit_get_name(fit, noffset, NULL), - fit_get_name(fit, image_noffset, - NULL)); - return -1; - } - - if (fit_image_hash_set_value(fit, noffset, value, - value_len)) { - printf("Can't set hash value for " - "'%s' hash node in '%s' image node\n", - fit_get_name(fit, noffset, NULL), - fit_get_name(fit, image_noffset, NULL)); - return -1; - } - } - } - - return 0; -} - -/** - * fit_image_hash_set_value - set hash value in requested has node - * @fit: pointer to the FIT format image header - * @noffset: hash node offset - * @value: hash value to be set - * @value_len: hash value length - * - * fit_image_hash_set_value() attempts to set hash value in a node at offset - * given and returns operation status to the caller. - * - * returns - * 0, on success - * -1, on failure - */ -int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value, - int value_len) -{ - int ret; - - ret = fdt_setprop(fit, noffset, FIT_VALUE_PROP, value, value_len); - if (ret) { - printf("Can't set hash '%s' property for '%s' node(%s)\n", - FIT_VALUE_PROP, fit_get_name(fit, noffset, NULL), - fdt_strerror(ret)); - return -1; - } - - return 0; -} -#endif /* USE_HOSTCC */ - -/** - * fit_image_check_hashes - verify data intergity - * @fit: pointer to the FIT format image header - * @image_noffset: component image node offset - * - * fit_image_check_hashes() goes over component image hash nodes, - * re-calculates each data hash and compares with the value stored in hash - * node. - * - * returns: - * 1, if all hashes are valid - * 0, otherwise (or on error) - */ -int fit_image_check_hashes(const void *fit, int image_noffset) -{ - const void *data; - size_t size; - char *algo; - uint8_t *fit_value; - int fit_value_len; -#ifndef USE_HOSTCC - int ignore; -#endif - uint8_t value[FIT_MAX_HASH_LEN]; - int value_len; - int noffset; - int ndepth; - char *err_msg = ""; - - /* Get image data and data length */ - if (fit_image_get_data(fit, image_noffset, &data, &size)) { - printf("Can't get image data/size\n"); - return 0; - } - - /* Process all hash subnodes of the component image node */ - for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* Direct child node of the component image node */ - - /* - * Check subnode name, must be equal to "hash". - * Multiple hash nodes require unique unit node - * names, e.g. hash@1, hash@2, etc. - */ - if (strncmp(fit_get_name(fit, noffset, NULL), - FIT_HASH_NODENAME, - strlen(FIT_HASH_NODENAME)) != 0) - continue; - - if (fit_image_hash_get_algo(fit, noffset, &algo)) { - err_msg = " error!\nCan't get hash algo " - "property"; - goto error; - } - printf("%s", algo); - -#ifndef USE_HOSTCC - fit_image_hash_get_ignore(fit, noffset, &ignore); - if (ignore) { - printf("-skipped "); - continue; - } -#endif - - if (fit_image_hash_get_value(fit, noffset, &fit_value, - &fit_value_len)) { - err_msg = " error!\nCan't get hash value " - "property"; - goto error; - } - - if (calculate_hash(data, size, algo, value, - &value_len)) { - err_msg = " error!\n" - "Unsupported hash algorithm"; - goto error; - } - - if (value_len != fit_value_len) { - err_msg = " error !\nBad hash value len"; - goto error; - } else if (memcmp(value, fit_value, value_len) != 0) { - err_msg = " error!\nBad hash value"; - goto error; - } - printf("+ "); - } + return ret; } - if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { - err_msg = " error!\nCorrupted or truncated tree"; - goto error; + if (IMAGE_ENABLE_OF_LIBFDT && of_size) { + ret = image_setup_libfdt(images, *of_flat_tree, of_size, lmb); + if (ret) + return ret; } - return 1; - -error: - printf("%s for '%s' hash node in '%s' image node\n", - err_msg, fit_get_name(fit, noffset, NULL), - fit_get_name(fit, image_noffset, NULL)); return 0; } - -/** - * fit_all_image_check_hashes - verify data intergity for all images - * @fit: pointer to the FIT format image header - * - * fit_all_image_check_hashes() goes over all images in the FIT and - * for every images checks if all it's hashes are valid. - * - * returns: - * 1, if all hashes of all images are valid - * 0, otherwise (or on error) - */ -int fit_all_image_check_hashes(const void *fit) -{ - int images_noffset; - int noffset; - int ndepth; - int count; - - /* Find images parent node offset */ - images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); - if (images_noffset < 0) { - printf("Can't find images parent node '%s' (%s)\n", - FIT_IMAGES_PATH, fdt_strerror(images_noffset)); - return 0; - } - - /* Process all image subnodes, check hashes for each */ - printf("## Checking hash(es) for FIT Image at %08lx ...\n", - (ulong)fit); - for (ndepth = 0, count = 0, - noffset = fdt_next_node(fit, images_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - if (ndepth == 1) { - /* - * Direct child node of the images parent node, - * i.e. component image node. - */ - printf(" Hash(es) for Image %u (%s): ", count++, - fit_get_name(fit, noffset, NULL)); - - if (!fit_image_check_hashes(fit, noffset)) - return 0; - printf("\n"); - } - } - return 1; -} - -/** - * fit_image_check_os - check whether image node is of a given os type - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @os: requested image os - * - * fit_image_check_os() reads image os property and compares its numeric - * id with the requested os. Comparison result is returned to the caller. - * - * returns: - * 1 if image is of given os type - * 0 otherwise (or on error) - */ -int fit_image_check_os(const void *fit, int noffset, uint8_t os) -{ - uint8_t image_os; - - if (fit_image_get_os(fit, noffset, &image_os)) - return 0; - return (os == image_os); -} - -/** - * fit_image_check_arch - check whether image node is of a given arch - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @arch: requested imagearch - * - * fit_image_check_arch() reads image arch property and compares its numeric - * id with the requested arch. Comparison result is returned to the caller. - * - * returns: - * 1 if image is of given arch - * 0 otherwise (or on error) - */ -int fit_image_check_arch(const void *fit, int noffset, uint8_t arch) -{ - uint8_t image_arch; - - if (fit_image_get_arch(fit, noffset, &image_arch)) - return 0; - return (arch == image_arch); -} - -/** - * fit_image_check_type - check whether image node is of a given type - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @type: requested image type - * - * fit_image_check_type() reads image type property and compares its numeric - * id with the requested type. Comparison result is returned to the caller. - * - * returns: - * 1 if image is of given type - * 0 otherwise (or on error) - */ -int fit_image_check_type(const void *fit, int noffset, uint8_t type) -{ - uint8_t image_type; - - if (fit_image_get_type(fit, noffset, &image_type)) - return 0; - return (type == image_type); -} - -/** - * fit_image_check_comp - check whether image node uses given compression - * @fit: pointer to the FIT format image header - * @noffset: component image node offset - * @comp: requested image compression type - * - * fit_image_check_comp() reads image compression property and compares its - * numeric id with the requested compression type. Comparison result is - * returned to the caller. - * - * returns: - * 1 if image uses requested compression - * 0 otherwise (or on error) - */ -int fit_image_check_comp(const void *fit, int noffset, uint8_t comp) -{ - uint8_t image_comp; - - if (fit_image_get_comp(fit, noffset, &image_comp)) - return 0; - return (comp == image_comp); -} - -/** - * fit_check_format - sanity check FIT image format - * @fit: pointer to the FIT format image header - * - * fit_check_format() runs a basic sanity FIT image verification. - * Routine checks for mandatory properties, nodes, etc. - * - * returns: - * 1, on success - * 0, on failure - */ -int fit_check_format(const void *fit) -{ - /* mandatory / node 'description' property */ - if (fdt_getprop(fit, 0, FIT_DESC_PROP, NULL) == NULL) { - debug("Wrong FIT format: no description\n"); - return 0; - } - -#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) - /* mandatory / node 'timestamp' property */ - if (fdt_getprop(fit, 0, FIT_TIMESTAMP_PROP, NULL) == NULL) { - debug("Wrong FIT format: no timestamp\n"); - return 0; - } -#endif - - /* mandatory subimages parent '/images' node */ - if (fdt_path_offset(fit, FIT_IMAGES_PATH) < 0) { - debug("Wrong FIT format: no images parent node\n"); - return 0; - } - - return 1; -} - - -/** - * fit_conf_find_compat - * @fit: pointer to the FIT format image header - * @fdt: pointer to the device tree to compare against - * - * fit_conf_find_compat() attempts to find the configuration whose fdt is the - * most compatible with the passed in device tree. - * - * Example: - * - * / o image-tree - * |-o images - * | |-o fdt@1 - * | |-o fdt@2 - * | - * |-o configurations - * |-o config@1 - * | |-fdt = fdt@1 - * | - * |-o config@2 - * |-fdt = fdt@2 - * - * / o U-Boot fdt - * |-compatible = "foo,bar", "bim,bam" - * - * / o kernel fdt1 - * |-compatible = "foo,bar", - * - * / o kernel fdt2 - * |-compatible = "bim,bam", "baz,biz" - * - * Configuration 1 would be picked because the first string in U-Boot's - * compatible list, "foo,bar", matches a compatible string in the root of fdt1. - * "bim,bam" in fdt2 matches the second string which isn't as good as fdt1. - * - * returns: - * offset to the configuration to use if one was found - * -1 otherwise - */ -int fit_conf_find_compat(const void *fit, const void *fdt) -{ - int ndepth = 0; - int noffset, confs_noffset, images_noffset; - const void *fdt_compat; - int fdt_compat_len; - int best_match_offset = 0; - int best_match_pos = 0; - - confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); - images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); - if (confs_noffset < 0 || images_noffset < 0) { - debug("Can't find configurations or images nodes.\n"); - return -1; - } - - fdt_compat = fdt_getprop(fdt, 0, "compatible", &fdt_compat_len); - if (!fdt_compat) { - debug("Fdt for comparison has no \"compatible\" property.\n"); - return -1; - } - - /* - * Loop over the configurations in the FIT image. - */ - for (noffset = fdt_next_node(fit, confs_noffset, &ndepth); - (noffset >= 0) && (ndepth > 0); - noffset = fdt_next_node(fit, noffset, &ndepth)) { - const void *kfdt; - const char *kfdt_name; - int kfdt_noffset; - const char *cur_fdt_compat; - int len; - size_t size; - int i; - - if (ndepth > 1) - continue; - - kfdt_name = fdt_getprop(fit, noffset, "fdt", &len); - if (!kfdt_name) { - debug("No fdt property found.\n"); - continue; - } - kfdt_noffset = fdt_subnode_offset(fit, images_noffset, - kfdt_name); - if (kfdt_noffset < 0) { - debug("No image node named \"%s\" found.\n", - kfdt_name); - continue; - } - /* - * Get a pointer to this configuration's fdt. - */ - if (fit_image_get_data(fit, kfdt_noffset, &kfdt, &size)) { - debug("Failed to get fdt \"%s\".\n", kfdt_name); - continue; - } - - len = fdt_compat_len; - cur_fdt_compat = fdt_compat; - /* - * Look for a match for each U-Boot compatibility string in - * turn in this configuration's fdt. - */ - for (i = 0; len > 0 && - (!best_match_offset || best_match_pos > i); i++) { - int cur_len = strlen(cur_fdt_compat) + 1; - - if (!fdt_node_check_compatible(kfdt, 0, - cur_fdt_compat)) { - best_match_offset = noffset; - best_match_pos = i; - break; - } - len -= cur_len; - cur_fdt_compat += cur_len; - } - } - if (!best_match_offset) { - debug("No match found.\n"); - return -1; - } - - return best_match_offset; -} - -/** - * fit_conf_get_node - get node offset for configuration of a given unit name - * @fit: pointer to the FIT format image header - * @conf_uname: configuration node unit name - * - * fit_conf_get_node() finds a configuration (withing the '/configurations' - * parant node) of a provided unit name. If configuration is found its node offset - * is returned to the caller. - * - * When NULL is provided in second argument fit_conf_get_node() will search - * for a default configuration node instead. Default configuration node unit name - * is retrived from FIT_DEFAULT_PROP property of the '/configurations' node. - * - * returns: - * configuration node offset when found (>=0) - * negative number on failure (FDT_ERR_* code) - */ -int fit_conf_get_node(const void *fit, const char *conf_uname) -{ - int noffset, confs_noffset; - int len; - - confs_noffset = fdt_path_offset(fit, FIT_CONFS_PATH); - if (confs_noffset < 0) { - debug("Can't find configurations parent node '%s' (%s)\n", - FIT_CONFS_PATH, fdt_strerror(confs_noffset)); - return confs_noffset; - } - - if (conf_uname == NULL) { - /* get configuration unit name from the default property */ - debug("No configuration specified, trying default...\n"); - conf_uname = (char *)fdt_getprop(fit, confs_noffset, - FIT_DEFAULT_PROP, &len); - if (conf_uname == NULL) { - fit_get_debug(fit, confs_noffset, FIT_DEFAULT_PROP, - len); - return len; - } - debug("Found default configuration: '%s'\n", conf_uname); - } - - noffset = fdt_subnode_offset(fit, confs_noffset, conf_uname); - if (noffset < 0) { - debug("Can't get node offset for configuration unit name: " - "'%s' (%s)\n", - conf_uname, fdt_strerror(noffset)); - } - - return noffset; -} - -static int __fit_conf_get_prop_node(const void *fit, int noffset, - const char *prop_name) -{ - char *uname; - int len; - - /* get kernel image unit name from configuration kernel property */ - uname = (char *)fdt_getprop(fit, noffset, prop_name, &len); - if (uname == NULL) - return len; - - return fit_image_get_node(fit, uname); -} - -/** - * fit_conf_get_kernel_node - get kernel image node offset that corresponds to - * a given configuration - * @fit: pointer to the FIT format image header - * @noffset: configuration node offset - * - * fit_conf_get_kernel_node() retrives kernel image node unit name from - * configuration FIT_KERNEL_PROP property and translates it to the node - * offset. - * - * returns: - * image node offset when found (>=0) - * negative number on failure (FDT_ERR_* code) - */ -int fit_conf_get_kernel_node(const void *fit, int noffset) -{ - return __fit_conf_get_prop_node(fit, noffset, FIT_KERNEL_PROP); -} - -/** - * fit_conf_get_ramdisk_node - get ramdisk image node offset that corresponds to - * a given configuration - * @fit: pointer to the FIT format image header - * @noffset: configuration node offset - * - * fit_conf_get_ramdisk_node() retrives ramdisk image node unit name from - * configuration FIT_KERNEL_PROP property and translates it to the node - * offset. - * - * returns: - * image node offset when found (>=0) - * negative number on failure (FDT_ERR_* code) - */ -int fit_conf_get_ramdisk_node(const void *fit, int noffset) -{ - return __fit_conf_get_prop_node(fit, noffset, FIT_RAMDISK_PROP); -} - -/** - * fit_conf_get_fdt_node - get fdt image node offset that corresponds to - * a given configuration - * @fit: pointer to the FIT format image header - * @noffset: configuration node offset - * - * fit_conf_get_fdt_node() retrives fdt image node unit name from - * configuration FIT_KERNEL_PROP property and translates it to the node - * offset. - * - * returns: - * image node offset when found (>=0) - * negative number on failure (FDT_ERR_* code) - */ -int fit_conf_get_fdt_node(const void *fit, int noffset) -{ - return __fit_conf_get_prop_node(fit, noffset, FIT_FDT_PROP); -} - -/** - * fit_conf_print - prints out the FIT configuration details - * @fit: pointer to the FIT format image header - * @noffset: offset of the configuration node - * @p: pointer to prefix string - * - * fit_conf_print() lists all mandatory properies for the processed - * configuration node. - * - * returns: - * no returned results - */ -void fit_conf_print(const void *fit, int noffset, const char *p) -{ - char *desc; - char *uname; - int ret; - - /* Mandatory properties */ - ret = fit_get_desc(fit, noffset, &desc); - printf("%s Description: ", p); - if (ret) - printf("unavailable\n"); - else - printf("%s\n", desc); - - uname = (char *)fdt_getprop(fit, noffset, FIT_KERNEL_PROP, NULL); - printf("%s Kernel: ", p); - if (uname == NULL) - printf("unavailable\n"); - else - printf("%s\n", uname); - - /* Optional properties */ - uname = (char *)fdt_getprop(fit, noffset, FIT_RAMDISK_PROP, NULL); - if (uname) - printf("%s Init Ramdisk: %s\n", p, uname); - - uname = (char *)fdt_getprop(fit, noffset, FIT_FDT_PROP, NULL); - if (uname) - printf("%s FDT: %s\n", p, uname); -} - -/** - * fit_check_ramdisk - verify FIT format ramdisk subimage - * @fit_hdr: pointer to the FIT ramdisk header - * @rd_noffset: ramdisk subimage node offset within FIT image - * @arch: requested ramdisk image architecture type - * @verify: data CRC verification flag - * - * fit_check_ramdisk() verifies integrity of the ramdisk subimage and from - * specified FIT image. - * - * returns: - * 1, on success - * 0, on failure - */ -#ifndef USE_HOSTCC -static int fit_check_ramdisk(const void *fit, int rd_noffset, uint8_t arch, - int verify) -{ - fit_image_print(fit, rd_noffset, " "); - - if (verify) { - puts(" Verifying Hash Integrity ... "); - if (!fit_image_check_hashes(fit, rd_noffset)) { - puts("Bad Data Hash\n"); - bootstage_error(BOOTSTAGE_ID_FIT_RD_HASH); - return 0; - } - puts("OK\n"); - } - - bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL); - if (!fit_image_check_os(fit, rd_noffset, IH_OS_LINUX) || - !fit_image_check_arch(fit, rd_noffset, arch) || - !fit_image_check_type(fit, rd_noffset, IH_TYPE_RAMDISK)) { - printf("No Linux %s Ramdisk Image\n", - genimg_get_arch_name(arch)); - bootstage_error(BOOTSTAGE_ID_FIT_RD_CHECK_ALL); - return 0; - } - - bootstage_mark(BOOTSTAGE_ID_FIT_RD_CHECK_ALL_OK); - return 1; -} -#endif /* USE_HOSTCC */ -#endif /* CONFIG_FIT */ +#endif /* CONFIG_LMB */ +#endif /* !USE_HOSTCC */ diff --git a/common/spl/Makefile b/common/spl/Makefile index da2afc1..a74563c 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -20,6 +20,7 @@ COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o +COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o endif COBJS := $(sort $(COBJS-y)) diff --git a/drivers/mmc/spl_mmc.c b/common/spl/spl_mmc.c index 7efdcb8..7efdcb8 100644 --- a/drivers/mmc/spl_mmc.c +++ b/common/spl/spl_mmc.c diff --git a/common/update.c b/common/update.c index 94d6a82..87941ec 100644 --- a/common/update.c +++ b/common/update.c @@ -297,7 +297,7 @@ got_update_file: printf("Processing update '%s' :", fit_get_name(fit, noffset, NULL)); - if (!fit_image_check_hashes(fit, noffset)) { + if (!fit_image_verify(fit, noffset)) { printf("Error: invalid update hash, aborting\n"); ret = 1; goto next_node; diff --git a/common/usb.c b/common/usb.c index 6fc0fc1..55fff5b 100644 --- a/common/usb.c +++ b/common/usb.c @@ -57,17 +57,6 @@ #include <asm/4xx_pci.h> #endif -#ifdef DEBUG -#define USB_DEBUG 1 -#define USB_HUB_DEBUG 1 -#else -#define USB_DEBUG 0 -#define USB_HUB_DEBUG 0 -#endif - -#define USB_PRINTF(fmt, args...) debug_cond(USB_DEBUG, fmt, ##args) -#define USB_HUB_PRINTF(fmt, args...) debug_cond(USB_HUB_DEBUG, fmt, ##args) - #define USB_BUFSIZ 512 static struct usb_device usb_dev[USB_MAX_DEVICE]; @@ -130,7 +119,7 @@ int usb_init(void) usb_started = 1; } - USB_PRINTF("scan end\n"); + debug("scan end\n"); /* if we were not able to find at least one working bus, bail out */ if (!usb_started) { puts("USB error: all controllers failed lowlevel init\n"); @@ -216,9 +205,9 @@ int usb_control_msg(struct usb_device *dev, unsigned int pipe, setup_packet->value = cpu_to_le16(value); setup_packet->index = cpu_to_le16(index); setup_packet->length = cpu_to_le16(size); - USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \ - "value 0x%X index 0x%X length 0x%X\n", - request, requesttype, value, index, size); + debug("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \ + "value 0x%X index 0x%X length 0x%X\n", + request, requesttype, value, index, size); dev->status = USB_ST_NOT_PROC; /*not yet processed */ if (submit_control_msg(dev, pipe, data, size, setup_packet) < 0) @@ -314,22 +303,22 @@ usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx) /* Control => bidirectional */ dev->epmaxpacketout[b] = ep_wMaxPacketSize; dev->epmaxpacketin[b] = ep_wMaxPacketSize; - USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n", - b, dev->epmaxpacketin[b]); + debug("##Control EP epmaxpacketout/in[%d] = %d\n", + b, dev->epmaxpacketin[b]); } else { if ((ep->bEndpointAddress & 0x80) == 0) { /* OUT Endpoint */ if (ep_wMaxPacketSize > dev->epmaxpacketout[b]) { dev->epmaxpacketout[b] = ep_wMaxPacketSize; - USB_PRINTF("##EP epmaxpacketout[%d] = %d\n", - b, dev->epmaxpacketout[b]); + debug("##EP epmaxpacketout[%d] = %d\n", + b, dev->epmaxpacketout[b]); } } else { /* IN Endpoint */ if (ep_wMaxPacketSize > dev->epmaxpacketin[b]) { dev->epmaxpacketin[b] = ep_wMaxPacketSize; - USB_PRINTF("##EP epmaxpacketin[%d] = %d\n", - b, dev->epmaxpacketin[b]); + debug("##EP epmaxpacketin[%d] = %d\n", + b, dev->epmaxpacketin[b]); } } /* if out */ } /* if control */ @@ -358,8 +347,8 @@ static int usb_parse_config(struct usb_device *dev, { struct usb_descriptor_header *head; int index, ifno, epno, curr_if_num; - int i; u16 ep_wMaxPacketSize; + struct usb_interface *if_desc = NULL; ifno = -1; epno = -1; @@ -387,23 +376,27 @@ static int usb_parse_config(struct usb_device *dev, &buffer[index])->bInterfaceNumber != curr_if_num) { /* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; - memcpy(&dev->config.if_desc[ifno], - &buffer[index], buffer[index]); - dev->config.if_desc[ifno].no_of_ep = 0; - dev->config.if_desc[ifno].num_altsetting = 1; + memcpy(if_desc, &buffer[index], buffer[index]); + if_desc->no_of_ep = 0; + if_desc->num_altsetting = 1; curr_if_num = - dev->config.if_desc[ifno].desc.bInterfaceNumber; + if_desc->desc.bInterfaceNumber; } else { /* found alternate setting for the interface */ - dev->config.if_desc[ifno].num_altsetting++; + if (ifno >= 0) { + if_desc = &dev->config.if_desc[ifno]; + if_desc->num_altsetting++; + } } break; case USB_DT_ENDPOINT: epno = dev->config.if_desc[ifno].no_of_ep; + if_desc = &dev->config.if_desc[ifno]; /* found an endpoint */ - dev->config.if_desc[ifno].no_of_ep++; - memcpy(&dev->config.if_desc[ifno].ep_desc[epno], + if_desc->no_of_ep++; + memcpy(&if_desc->ep_desc[epno], &buffer[index], buffer[index]); ep_wMaxPacketSize = get_unaligned(&dev->config.\ if_desc[ifno].\ @@ -414,23 +407,30 @@ static int usb_parse_config(struct usb_device *dev, if_desc[ifno].\ ep_desc[epno].\ wMaxPacketSize); - USB_PRINTF("if %d, ep %d\n", ifno, epno); + debug("if %d, ep %d\n", ifno, epno); + break; + case USB_DT_SS_ENDPOINT_COMP: + if_desc = &dev->config.if_desc[ifno]; + memcpy(&if_desc->ss_ep_comp_desc[epno], + &buffer[index], buffer[index]); break; default: if (head->bLength == 0) return 1; - USB_PRINTF("unknown Description Type : %x\n", - head->bDescriptorType); + debug("unknown Description Type : %x\n", + head->bDescriptorType); +#ifdef DEBUG { -#ifdef USB_DEBUG unsigned char *ch = (unsigned char *)head; -#endif + int i; + for (i = 0; i < head->bLength; i++) - USB_PRINTF("%02X ", *ch++); - USB_PRINTF("\n\n\n"); + debug("%02X ", *ch++); + debug("\n\n\n"); } +#endif break; } index += head->bLength; @@ -514,8 +514,7 @@ int usb_get_configuration_no(struct usb_device *dev, } result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp); - USB_PRINTF("get_conf_no %d Result %d, wLength %d\n", - cfgno, result, tmp); + debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, tmp); return result; } @@ -527,7 +526,7 @@ static int usb_set_address(struct usb_device *dev) { int res; - USB_PRINTF("set address %d\n", dev->devnum); + debug("set address %d\n", dev->devnum); res = usb_control_msg(dev, usb_snddefctrl(dev), USB_REQ_SET_ADDRESS, 0, (dev->devnum), 0, @@ -579,7 +578,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) static int usb_set_configuration(struct usb_device *dev, int configuration) { int res; - USB_PRINTF("set configuration %d\n", configuration); + debug("set configuration %d\n", configuration); /* set setup command */ res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), USB_REQ_SET_CONFIGURATION, 0, @@ -731,19 +730,19 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) if (!dev->have_langid) { err = usb_string_sub(dev, 0, 0, tbuf); if (err < 0) { - USB_PRINTF("error getting string descriptor 0 " \ - "(error=%lx)\n", dev->status); + debug("error getting string descriptor 0 " \ + "(error=%lx)\n", dev->status); return -1; } else if (tbuf[0] < 4) { - USB_PRINTF("string descriptor 0 too short\n"); + debug("string descriptor 0 too short\n"); return -1; } else { dev->have_langid = -1; dev->string_langid = tbuf[2] | (tbuf[3] << 8); /* always use the first langid listed */ - USB_PRINTF("USB device number %d default " \ - "language ID 0x%x\n", - dev->devnum, dev->string_langid); + debug("USB device number %d default " \ + "language ID 0x%x\n", + dev->devnum, dev->string_langid); } } @@ -789,7 +788,7 @@ struct usb_device *usb_get_dev_index(int index) struct usb_device *usb_alloc_new_device(void *controller) { int i; - USB_PRINTF("New Device %d\n", dev_index); + debug("New Device %d\n", dev_index); if (dev_index == USB_MAX_DEVICE) { printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE); return NULL; @@ -813,7 +812,7 @@ struct usb_device *usb_alloc_new_device(void *controller) void usb_free_device(void) { dev_index--; - USB_PRINTF("Freeing device node: %d\n", dev_index); + debug("Freeing device node: %d\n", dev_index); memset(&usb_dev[dev_index], 0, sizeof(struct usb_device)); usb_dev[dev_index].devnum = -1; } @@ -880,11 +879,16 @@ int usb_new_device(struct usb_device *dev) err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64); if (err < 0) { - USB_PRINTF("usb_new_device: usb_get_descriptor() failed\n"); + debug("usb_new_device: usb_get_descriptor() failed\n"); return 1; } dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0; + /* + * Fetch the device class, driver can use this info + * to differentiate between HUB and DEVICE. + */ + dev->descriptor.bDeviceClass = desc->bDeviceClass; /* find the port number we're at */ if (parent) { @@ -973,9 +977,9 @@ int usb_new_device(struct usb_device *dev) "len %d, status %lX\n", dev->act_len, dev->status); return -1; } - USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n", - dev->descriptor.iManufacturer, dev->descriptor.iProduct, - dev->descriptor.iSerialNumber); + debug("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n", + dev->descriptor.iManufacturer, dev->descriptor.iProduct, + dev->descriptor.iSerialNumber); memset(dev->mf, 0, sizeof(dev->mf)); memset(dev->prod, 0, sizeof(dev->prod)); memset(dev->serial, 0, sizeof(dev->serial)); @@ -988,9 +992,9 @@ int usb_new_device(struct usb_device *dev) if (dev->descriptor.iSerialNumber) usb_string(dev, dev->descriptor.iSerialNumber, dev->serial, sizeof(dev->serial)); - USB_PRINTF("Manufacturer %s\n", dev->mf); - USB_PRINTF("Product %s\n", dev->prod); - USB_PRINTF("SerialNumber %s\n", dev->serial); + debug("Manufacturer %s\n", dev->mf); + debug("Product %s\n", dev->prod); + debug("SerialNumber %s\n", dev->serial); /* now prode if the device is a hub */ usb_hub_probe(dev, 0); return 0; diff --git a/common/usb_hub.c b/common/usb_hub.c index b5eeb62..0d79ec3 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -53,17 +53,6 @@ #include <asm/4xx_pci.h> #endif -#ifdef DEBUG -#define USB_DEBUG 1 -#define USB_HUB_DEBUG 1 -#else -#define USB_DEBUG 0 -#define USB_HUB_DEBUG 0 -#endif - -#define USB_PRINTF(fmt, args...) debug_cond(USB_DEBUG, fmt, ##args) -#define USB_HUB_PRINTF(fmt, args...) debug_cond(USB_HUB_DEBUG, fmt, ##args) - #define USB_BUFSIZ 512 static struct usb_hub_device hub_dev[USB_MAX_HUB]; @@ -111,13 +100,52 @@ static void usb_hub_power_on(struct usb_hub_device *hub) int i; struct usb_device *dev; unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2; + ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); + unsigned short portstatus; + int ret; dev = hub->pusb_dev; - /* Enable power to the ports */ - USB_HUB_PRINTF("enabling power on all ports\n"); + + /* + * Enable power to the ports: + * Here we Power-cycle the ports: aka, + * turning them off and turning on again. + */ + debug("enabling power on all ports\n"); + for (i = 0; i < dev->maxchild; i++) { + usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); + debug("port %d returns %lX\n", i + 1, dev->status); + } + + /* Wait at least 2*bPwrOn2PwrGood for PP to change */ + mdelay(pgood_delay); + + for (i = 0; i < dev->maxchild; i++) { + ret = usb_get_port_status(dev, i + 1, portsts); + if (ret < 0) { + debug("port %d: get_port_status failed\n", i + 1); + return; + } + + /* + * Check to confirm the state of Port Power: + * xHCI says "After modifying PP, s/w shall read + * PP and confirm that it has reached the desired state + * before modifying it again, undefined behavior may occur + * if this procedure is not followed". + * EHCI doesn't say anything like this, but no harm in keeping + * this. + */ + portstatus = le16_to_cpu(portsts->wPortStatus); + if (portstatus & (USB_PORT_STAT_POWER << 1)) { + debug("port %d: Port power change failed\n", i + 1); + return; + } + } + for (i = 0; i < dev->maxchild; i++) { usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); - USB_HUB_PRINTF("port %d returns %lX\n", i + 1, dev->status); + debug("port %d returns %lX\n", i + 1, dev->status); } /* Wait at least 100 msec for power to become stable */ @@ -142,12 +170,24 @@ static struct usb_hub_device *usb_hub_allocate(void) static inline char *portspeed(int portstatus) { - if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED)) - return "480 Mb/s"; - else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED)) - return "1.5 Mb/s"; - else - return "12 Mb/s"; + char *speed_str; + + switch (portstatus & USB_PORT_STAT_SPEED_MASK) { + case USB_PORT_STAT_SUPER_SPEED: + speed_str = "5 Gb/s"; + break; + case USB_PORT_STAT_HIGH_SPEED: + speed_str = "480 Mb/s"; + break; + case USB_PORT_STAT_LOW_SPEED: + speed_str = "1.5 Mb/s"; + break; + default: + speed_str = "12 Mb/s"; + break; + } + + return speed_str; } int hub_port_reset(struct usb_device *dev, int port, @@ -157,29 +197,28 @@ int hub_port_reset(struct usb_device *dev, int port, ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus, portchange; - USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port); + debug("hub_port_reset: resetting port %d...\n", port); for (tries = 0; tries < MAX_TRIES; tries++) { usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET); mdelay(200); if (usb_get_port_status(dev, port + 1, portsts) < 0) { - USB_HUB_PRINTF("get_port_status failed status %lX\n", - dev->status); + debug("get_port_status failed status %lX\n", + dev->status); return -1; } portstatus = le16_to_cpu(portsts->wPortStatus); portchange = le16_to_cpu(portsts->wPortChange); - USB_HUB_PRINTF("portstatus %x, change %x, %s\n", - portstatus, portchange, - portspeed(portstatus)); + debug("portstatus %x, change %x, %s\n", portstatus, portchange, + portspeed(portstatus)); - USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ - " USB_PORT_STAT_ENABLE %d\n", - (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0, - (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0, - (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0); + debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \ + " USB_PORT_STAT_ENABLE %d\n", + (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0, + (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0, + (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0); if ((portchange & USB_PORT_STAT_C_CONNECTION) || !(portstatus & USB_PORT_STAT_CONNECTION)) @@ -192,9 +231,9 @@ int hub_port_reset(struct usb_device *dev, int port, } if (tries == MAX_TRIES) { - USB_HUB_PRINTF("Cannot enable port %i after %i retries, " \ - "disabling port.\n", port + 1, MAX_TRIES); - USB_HUB_PRINTF("Maybe the USB cable is bad?\n"); + debug("Cannot enable port %i after %i retries, " \ + "disabling port.\n", port + 1, MAX_TRIES); + debug("Maybe the USB cable is bad?\n"); return -1; } @@ -212,15 +251,15 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) /* Check status */ if (usb_get_port_status(dev, port + 1, portsts) < 0) { - USB_HUB_PRINTF("get_port_status failed\n"); + debug("get_port_status failed\n"); return; } portstatus = le16_to_cpu(portsts->wPortStatus); - USB_HUB_PRINTF("portstatus %x, change %x, %s\n", - portstatus, - le16_to_cpu(portsts->wPortChange), - portspeed(portstatus)); + debug("portstatus %x, change %x, %s\n", + portstatus, + le16_to_cpu(portsts->wPortChange), + portspeed(portstatus)); /* Clear the connection change status */ usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION); @@ -228,7 +267,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) /* Disconnect any existing devices under this port */ if (((!(portstatus & USB_PORT_STAT_CONNECTION)) && (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) { - USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n"); + debug("usb_disconnect(&hub->children[port]);\n"); /* Return now if nothing is connected */ if (!(portstatus & USB_PORT_STAT_CONNECTION)) return; @@ -246,12 +285,20 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) /* Allocate a new device struct for it */ usb = usb_alloc_new_device(dev->controller); - if (portstatus & USB_PORT_STAT_HIGH_SPEED) + switch (portstatus & USB_PORT_STAT_SPEED_MASK) { + case USB_PORT_STAT_SUPER_SPEED: + usb->speed = USB_SPEED_SUPER; + break; + case USB_PORT_STAT_HIGH_SPEED: usb->speed = USB_SPEED_HIGH; - else if (portstatus & USB_PORT_STAT_LOW_SPEED) + break; + case USB_PORT_STAT_LOW_SPEED: usb->speed = USB_SPEED_LOW; - else + break; + default: usb->speed = USB_SPEED_FULL; + break; + } dev->children[port] = usb; usb->parent = dev; @@ -261,7 +308,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) /* Woops, disable the port */ usb_free_device(); dev->children[port] = NULL; - USB_HUB_PRINTF("hub: disabling port %d\n", port + 1); + debug("hub: disabling port %d\n", port + 1); usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE); } } @@ -275,9 +322,7 @@ static int usb_hub_configure(struct usb_device *dev) short hubCharacteristics; struct usb_hub_descriptor *descriptor; struct usb_hub_device *hub; -#ifdef USB_HUB_DEBUG - struct usb_hub_status *hubsts; -#endif + __maybe_unused struct usb_hub_status *hubsts; /* "allocate" Hub device */ hub = usb_hub_allocate(); @@ -286,8 +331,8 @@ static int usb_hub_configure(struct usb_device *dev) hub->pusb_dev = dev; /* Get the the hub descriptor */ if (usb_get_hub_descriptor(dev, buffer, 4) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ - "descriptor, giving up %lX\n", dev->status); + debug("usb_hub_configure: failed to get hub " \ + "descriptor, giving up %lX\n", dev->status); return -1; } descriptor = (struct usb_hub_descriptor *)buffer; @@ -295,15 +340,14 @@ static int usb_hub_configure(struct usb_device *dev) /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */ i = descriptor->bLength; if (i > USB_BUFSIZ) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ - "descriptor - too long: %d\n", - descriptor->bLength); + debug("usb_hub_configure: failed to get hub " \ + "descriptor - too long: %d\n", descriptor->bLength); return -1; } if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \ - "descriptor 2nd giving up %lX\n", dev->status); + debug("usb_hub_configure: failed to get hub " \ + "descriptor 2nd giving up %lX\n", dev->status); return -1; } memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength); @@ -325,74 +369,75 @@ static int usb_hub_configure(struct usb_device *dev) hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i]; dev->maxchild = descriptor->bNbrPorts; - USB_HUB_PRINTF("%d ports detected\n", dev->maxchild); + debug("%d ports detected\n", dev->maxchild); hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics); switch (hubCharacteristics & HUB_CHAR_LPSM) { case 0x00: - USB_HUB_PRINTF("ganged power switching\n"); + debug("ganged power switching\n"); break; case 0x01: - USB_HUB_PRINTF("individual port power switching\n"); + debug("individual port power switching\n"); break; case 0x02: case 0x03: - USB_HUB_PRINTF("unknown reserved power switching mode\n"); + debug("unknown reserved power switching mode\n"); break; } if (hubCharacteristics & HUB_CHAR_COMPOUND) - USB_HUB_PRINTF("part of a compound device\n"); + debug("part of a compound device\n"); else - USB_HUB_PRINTF("standalone hub\n"); + debug("standalone hub\n"); switch (hubCharacteristics & HUB_CHAR_OCPM) { case 0x00: - USB_HUB_PRINTF("global over-current protection\n"); + debug("global over-current protection\n"); break; case 0x08: - USB_HUB_PRINTF("individual port over-current protection\n"); + debug("individual port over-current protection\n"); break; case 0x10: case 0x18: - USB_HUB_PRINTF("no over-current protection\n"); + debug("no over-current protection\n"); break; } - USB_HUB_PRINTF("power on to power good time: %dms\n", - descriptor->bPwrOn2PwrGood * 2); - USB_HUB_PRINTF("hub controller current requirement: %dmA\n", - descriptor->bHubContrCurrent); + debug("power on to power good time: %dms\n", + descriptor->bPwrOn2PwrGood * 2); + debug("hub controller current requirement: %dmA\n", + descriptor->bHubContrCurrent); for (i = 0; i < dev->maxchild; i++) - USB_HUB_PRINTF("port %d is%s removable\n", i + 1, - hub->desc.DeviceRemovable[(i + 1) / 8] & \ - (1 << ((i + 1) % 8)) ? " not" : ""); + debug("port %d is%s removable\n", i + 1, + hub->desc.DeviceRemovable[(i + 1) / 8] & \ + (1 << ((i + 1) % 8)) ? " not" : ""); if (sizeof(struct usb_hub_status) > USB_BUFSIZ) { - USB_HUB_PRINTF("usb_hub_configure: failed to get Status - " \ - "too long: %d\n", descriptor->bLength); + debug("usb_hub_configure: failed to get Status - " \ + "too long: %d\n", descriptor->bLength); return -1; } if (usb_get_hub_status(dev, buffer) < 0) { - USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n", - dev->status); + debug("usb_hub_configure: failed to get Status %lX\n", + dev->status); return -1; } -#ifdef USB_HUB_DEBUG +#ifdef DEBUG hubsts = (struct usb_hub_status *)buffer; #endif - USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n", - le16_to_cpu(hubsts->wHubStatus), - le16_to_cpu(hubsts->wHubChange)); - USB_HUB_PRINTF("local power source is %s\n", - (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \ - "lost (inactive)" : "good"); - USB_HUB_PRINTF("%sover-current condition exists\n", - (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \ - "" : "no "); + + debug("get_hub_status returned status %X, change %X\n", + le16_to_cpu(hubsts->wHubStatus), + le16_to_cpu(hubsts->wHubChange)); + debug("local power source is %s\n", + (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \ + "lost (inactive)" : "good"); + debug("%sover-current condition exists\n", + (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \ + "" : "no "); usb_hub_power_on(hub); for (i = 0; i < dev->maxchild; i++) { @@ -412,7 +457,7 @@ static int usb_hub_configure(struct usb_device *dev) do { ret = usb_get_port_status(dev, i + 1, portsts); if (ret < 0) { - USB_HUB_PRINTF("get_port_status failed\n"); + debug("get_port_status failed\n"); break; } @@ -423,22 +468,21 @@ static int usb_hub_configure(struct usb_device *dev) (portstatus & USB_PORT_STAT_CONNECTION)) break; - mdelay(100); } while (get_timer(start) < CONFIG_SYS_HZ * 10); if (ret < 0) continue; - USB_HUB_PRINTF("Port %d Status %X Change %X\n", - i + 1, portstatus, portchange); + debug("Port %d Status %X Change %X\n", + i + 1, portstatus, portchange); if (portchange & USB_PORT_STAT_C_CONNECTION) { - USB_HUB_PRINTF("port %d connection change\n", i + 1); + debug("port %d connection change\n", i + 1); usb_hub_port_connect_change(dev, i); } if (portchange & USB_PORT_STAT_C_ENABLE) { - USB_HUB_PRINTF("port %d enable change, status %x\n", - i + 1, portstatus); + debug("port %d enable change, status %x\n", + i + 1, portstatus); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_ENABLE); @@ -448,27 +492,27 @@ static int usb_hub_configure(struct usb_device *dev) if (!(portstatus & USB_PORT_STAT_ENABLE) && (portstatus & USB_PORT_STAT_CONNECTION) && ((dev->children[i]))) { - USB_HUB_PRINTF("already running port %i " \ - "disabled by hub (EMI?), " \ - "re-enabling...\n", i + 1); - usb_hub_port_connect_change(dev, i); + debug("already running port %i " \ + "disabled by hub (EMI?), " \ + "re-enabling...\n", i + 1); + usb_hub_port_connect_change(dev, i); } } if (portstatus & USB_PORT_STAT_SUSPEND) { - USB_HUB_PRINTF("port %d suspend change\n", i + 1); + debug("port %d suspend change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_SUSPEND); } if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - USB_HUB_PRINTF("port %d over-current change\n", i + 1); + debug("port %d over-current change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_OVER_CURRENT); usb_hub_power_on(hub); } if (portchange & USB_PORT_STAT_C_RESET) { - USB_HUB_PRINTF("port %d reset change\n", i + 1); + debug("port %d reset change\n", i + 1); usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_C_RESET); } @@ -503,7 +547,7 @@ int usb_hub_probe(struct usb_device *dev, int ifnum) if ((ep->bmAttributes & 3) != 3) return 0; /* We found a hub */ - USB_HUB_PRINTF("USB hub found\n"); + debug("USB hub found\n"); ret = usb_hub_configure(dev); return ret; } diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 4efbcfe..b962849 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -31,12 +31,6 @@ #include <usb.h> -#ifdef USB_KBD_DEBUG -#define USB_KBD_PRINTF(fmt, args...) printf(fmt, ##args) -#else -#define USB_KBD_PRINTF(fmt, args...) -#endif - /* * If overwrite_console returns 1, the stdin, stderr and stdout * are switched to the serial port, else the settings in the @@ -262,7 +256,7 @@ static int usb_kbd_translate(struct usb_kbd_pdata *data, unsigned char scancode, /* Report keycode if any */ if (keycode) { - USB_KBD_PRINTF("%c", keycode); + debug("%c", keycode); usb_kbd_put_queue(data, keycode); } @@ -324,8 +318,8 @@ static int usb_kbd_irq_worker(struct usb_device *dev) static int usb_kbd_irq(struct usb_device *dev) { if ((dev->irq_status != 0) || (dev->irq_act_len != 8)) { - USB_KBD_PRINTF("USB KBD: Error %lX, len %d\n", - dev->irq_status, dev->irq_act_len); + debug("USB KBD: Error %lX, len %d\n", + dev->irq_status, dev->irq_act_len); return 1; } @@ -437,7 +431,7 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) if ((ep->bmAttributes & 3) != 3) return 0; - USB_KBD_PRINTF("USB KBD: found set protocol...\n"); + debug("USB KBD: found set protocol...\n"); data = malloc(sizeof(struct usb_kbd_pdata)); if (!data) { @@ -463,10 +457,10 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) /* We found a USB Keyboard, install it. */ usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0); - USB_KBD_PRINTF("USB KBD: found set idle...\n"); + debug("USB KBD: found set idle...\n"); usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0); - USB_KBD_PRINTF("USB KBD: enable interrupt pipe...\n"); + debug("USB KBD: enable interrupt pipe...\n"); usb_submit_int_msg(dev, pipe, data->new, maxp > 8 ? 8 : maxp, ep->bInterval); @@ -497,16 +491,16 @@ int drv_usb_kbd_init(void) continue; /* We found a keyboard, check if it is already registered. */ - USB_KBD_PRINTF("USB KBD: found set up device.\n"); + debug("USB KBD: found set up device.\n"); old_dev = stdio_get_by_name(DEVNAME); if (old_dev) { /* Already registered, just return ok. */ - USB_KBD_PRINTF("USB KBD: is already registered.\n"); + debug("USB KBD: is already registered.\n"); return 1; } /* Register the keyboard */ - USB_KBD_PRINTF("USB KBD: register.\n"); + debug("USB KBD: register.\n"); memset(&usb_kbd_dev, 0, sizeof(struct stdio_dev)); strcpy(usb_kbd_dev.name, DEVNAME); usb_kbd_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM; diff --git a/common/usb_storage.c b/common/usb_storage.c index c5db044..457970f 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -59,14 +59,6 @@ #undef BBB_COMDAT_TRACE #undef BBB_XPORT_TRACE -#ifdef USB_STOR_DEBUG -#define USB_BLK_DEBUG 1 -#else -#define USB_BLK_DEBUG 0 -#endif - -#define USB_STOR_PRINTF(fmt, args...) debug_cond(USB_BLK_DEBUG, fmt, ##args) - #include <scsi.h> /* direction table -- this indicates the direction of the data * transfer for each command code -- a 1 indicates input @@ -228,8 +220,7 @@ static unsigned int usb_get_max_lun(struct us_data *us) 0, us->ifnum, result, sizeof(char), USB_CNTL_TIMEOUT * 5); - USB_STOR_PRINTF("Get Max LUN -> len = %i, result = %i\n", - len, (int) *result); + debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result); return (len > 0) ? *result : 0; } @@ -262,7 +253,7 @@ int usb_stor_scan(int mode) usb_max_devs = 0; for (i = 0; i < USB_MAX_DEVICE; i++) { dev = usb_get_dev_index(i); /* get device */ - USB_STOR_PRINTF("i=%d\n", i); + debug("i=%d\n", i); if (dev == NULL) break; /* no more devices available */ @@ -278,9 +269,9 @@ int usb_stor_scan(int mode) lun++) { usb_dev_desc[usb_max_devs].lun = lun; if (usb_stor_get_info(dev, &usb_stor[start], - &usb_dev_desc[usb_max_devs]) == 1) { - usb_max_devs++; - } + &usb_dev_desc[usb_max_devs]) == 1) { + usb_max_devs++; + } } } /* if storage device */ @@ -309,7 +300,7 @@ static int usb_stor_irq(struct usb_device *dev) } -#ifdef USB_STOR_DEBUG +#ifdef DEBUG static void usb_show_srb(ccb *pccb) { @@ -361,45 +352,49 @@ static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length) /* set up the transfer loop */ do { /* transfer the data */ - USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n", - (unsigned int)buf, this_xfer, 11 - maxtry); + debug("Bulk xfer 0x%x(%d) try #%d\n", + (unsigned int)buf, this_xfer, 11 - maxtry); result = usb_bulk_msg(us->pusb_dev, pipe, buf, this_xfer, &partial, USB_CNTL_TIMEOUT * 5); - USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n", - result, partial, this_xfer); + debug("bulk_msg returned %d xferred %d/%d\n", + result, partial, this_xfer); if (us->pusb_dev->status != 0) { /* if we stall, we need to clear it before * we go on */ -#ifdef USB_STOR_DEBUG +#ifdef DEBUG display_int_status(us->pusb_dev->status); #endif if (us->pusb_dev->status & USB_ST_STALLED) { - USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe); + debug("stalled ->clearing endpoint" \ + "halt for pipe 0x%x\n", pipe); stat = us->pusb_dev->status; usb_clear_halt(us->pusb_dev, pipe); us->pusb_dev->status = stat; if (this_xfer == partial) { - USB_STOR_PRINTF("bulk transferred with error %lX, but data ok\n", us->pusb_dev->status); + debug("bulk transferred" \ + "with error %lX," \ + " but data ok\n", + us->pusb_dev->status); return 0; } else return result; } if (us->pusb_dev->status & USB_ST_NAK_REC) { - USB_STOR_PRINTF("Device NAKed bulk_msg\n"); + debug("Device NAKed bulk_msg\n"); return result; } - USB_STOR_PRINTF("bulk transferred with error"); + debug("bulk transferred with error"); if (this_xfer == partial) { - USB_STOR_PRINTF(" %ld, but data ok\n", - us->pusb_dev->status); + debug(" %ld, but data ok\n", + us->pusb_dev->status); return 0; } /* if our try counter reaches 0, bail out */ - USB_STOR_PRINTF(" %ld, data %d\n", - us->pusb_dev->status, partial); + debug(" %ld, data %d\n", + us->pusb_dev->status, partial); if (!maxtry--) return result; } @@ -433,35 +428,34 @@ static int usb_stor_BBB_reset(struct us_data *us) * * This comment stolen from FreeBSD's /sys/dev/usb/umass.c. */ - USB_STOR_PRINTF("BBB_reset\n"); + debug("BBB_reset\n"); result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0), US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5); if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { - USB_STOR_PRINTF("RESET:stall\n"); + debug("RESET:stall\n"); return -1; } /* long wait for reset */ mdelay(150); - USB_STOR_PRINTF("BBB_reset result %d: status %lX reset\n", result, - us->pusb_dev->status); + debug("BBB_reset result %d: status %lX reset\n", + result, us->pusb_dev->status); pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in); result = usb_clear_halt(us->pusb_dev, pipe); /* long wait for reset */ mdelay(150); - USB_STOR_PRINTF("BBB_reset result %d: status %lX clearing IN endpoint\n", - result, us->pusb_dev->status); + debug("BBB_reset result %d: status %lX clearing IN endpoint\n", + result, us->pusb_dev->status); /* long wait for reset */ pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out); result = usb_clear_halt(us->pusb_dev, pipe); mdelay(150); - USB_STOR_PRINTF("BBB_reset result %d: status %lX" - " clearing OUT endpoint\n", result, - us->pusb_dev->status); - USB_STOR_PRINTF("BBB_reset done\n"); + debug("BBB_reset result %d: status %lX clearing OUT endpoint\n", + result, us->pusb_dev->status); + debug("BBB_reset done\n"); return 0; } @@ -474,7 +468,7 @@ static int usb_stor_CB_reset(struct us_data *us) unsigned char cmd[12]; int result; - USB_STOR_PRINTF("CB_reset\n"); + debug("CB_reset\n"); memset(cmd, 0xff, sizeof(cmd)); cmd[0] = SCSI_SEND_DIAG; cmd[1] = 4; @@ -486,13 +480,12 @@ static int usb_stor_CB_reset(struct us_data *us) /* long wait for reset */ mdelay(1500); - USB_STOR_PRINTF("CB_reset result %d: status %lX" - " clearing endpoint halt\n", result, - us->pusb_dev->status); + debug("CB_reset result %d: status %lX clearing endpoint halt\n", + result, us->pusb_dev->status); usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in)); usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out)); - USB_STOR_PRINTF("CB_reset done\n"); + debug("CB_reset done\n"); return 0; } @@ -511,7 +504,7 @@ static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) dir_in = US_DIRECTION(srb->cmd[0]); #ifdef BBB_COMDAT_TRACE - printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n", + printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n", dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen, srb->pdata); if (srb->cmdlen) { @@ -522,7 +515,7 @@ static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) #endif /* sanity checks */ if (!(srb->cmdlen <= CBWCDBLENGTH)) { - USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n"); + debug("usb_stor_BBB_comdat:cmdlen too large\n"); return -1; } @@ -541,7 +534,7 @@ static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE, &actlen, USB_CNTL_TIMEOUT * 5); if (result < 0) - USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n"); + debug("usb_stor_BBB_comdat:usb_bulk_msg error\n"); return result; } @@ -564,8 +557,8 @@ static int usb_stor_CB_comdat(ccb *srb, struct us_data *us) pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out); while (retry--) { - USB_STOR_PRINTF("CBI gets a command: Try %d\n", 5 - retry); -#ifdef USB_STOR_DEBUG + debug("CBI gets a command: Try %d\n", 5 - retry); +#ifdef DEBUG usb_show_srb(srb); #endif /* let's send the command via the control pipe */ @@ -576,35 +569,35 @@ static int usb_stor_CB_comdat(ccb *srb, struct us_data *us) 0, us->ifnum, srb->cmd, srb->cmdlen, USB_CNTL_TIMEOUT * 5); - USB_STOR_PRINTF("CB_transport: control msg returned %d," - " status %lX\n", result, us->pusb_dev->status); + debug("CB_transport: control msg returned %d, status %lX\n", + result, us->pusb_dev->status); /* check the return code for the command */ if (result < 0) { if (us->pusb_dev->status & USB_ST_STALLED) { status = us->pusb_dev->status; - USB_STOR_PRINTF(" stall during command found," - " clear pipe\n"); + debug(" stall during command found," \ + " clear pipe\n"); usb_clear_halt(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0)); us->pusb_dev->status = status; } - USB_STOR_PRINTF(" error during command %02X" - " Stat = %lX\n", srb->cmd[0], - us->pusb_dev->status); + debug(" error during command %02X" \ + " Stat = %lX\n", srb->cmd[0], + us->pusb_dev->status); return result; } /* transfer the data payload for this command, if one exists*/ - USB_STOR_PRINTF("CB_transport: control msg returned %d," - " direction is %s to go 0x%lx\n", result, - dir_in ? "IN" : "OUT", srb->datalen); + debug("CB_transport: control msg returned %d," \ + " direction is %s to go 0x%lx\n", result, + dir_in ? "IN" : "OUT", srb->datalen); if (srb->datalen) { result = us_one_transfer(us, pipe, (char *)srb->pdata, srb->datalen); - USB_STOR_PRINTF("CBI attempted to transfer data," - " result is %d status %lX, len %d\n", - result, us->pusb_dev->status, - us->pusb_dev->act_len); + debug("CBI attempted to transfer data," \ + " result is %d status %lX, len %d\n", + result, us->pusb_dev->status, + us->pusb_dev->act_len); if (!(us->pusb_dev->status & USB_ST_NAK_REC)) break; } /* if (srb->datalen) */ @@ -635,10 +628,9 @@ static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) us->ip_wanted = 0; return USB_STOR_TRANSPORT_ERROR; } - USB_STOR_PRINTF - ("Got interrupt data 0x%x, transfered %d status 0x%lX\n", - us->ip_data, us->pusb_dev->irq_act_len, - us->pusb_dev->irq_status); + debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n", + us->ip_data, us->pusb_dev->irq_act_len, + us->pusb_dev->irq_status); /* UFI gives us ASC and ASCQ, like a request sense */ if (us->subclass == US_SC_UFI) { if (srb->cmd[0] == SCSI_REQ_SENSE || @@ -691,11 +683,11 @@ static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) dir_in = US_DIRECTION(srb->cmd[0]); /* COMMAND phase */ - USB_STOR_PRINTF("COMMAND phase\n"); + debug("COMMAND phase\n"); result = usb_stor_BBB_comdat(srb, us); if (result < 0) { - USB_STOR_PRINTF("failed to send CBW status %ld\n", - us->pusb_dev->status); + debug("failed to send CBW status %ld\n", + us->pusb_dev->status); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } @@ -708,7 +700,7 @@ static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) /* no data, go immediately to the STATUS phase */ if (srb->datalen == 0) goto st; - USB_STOR_PRINTF("DATA phase\n"); + debug("DATA phase\n"); if (dir_in) pipe = pipein; else @@ -717,7 +709,7 @@ static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) &data_actlen, USB_CNTL_TIMEOUT * 5); /* special handling of STALL in DATA phase */ if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { - USB_STOR_PRINTF("DATA:stall\n"); + debug("DATA:stall\n"); /* clear the STALL on the endpoint */ result = usb_stor_BBB_clear_endpt_stall(us, dir_in ? us->ep_in : us->ep_out); @@ -726,8 +718,8 @@ static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) goto st; } if (result < 0) { - USB_STOR_PRINTF("usb_bulk_msg error status %ld\n", - us->pusb_dev->status); + debug("usb_bulk_msg error status %ld\n", + us->pusb_dev->status); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } @@ -740,14 +732,14 @@ static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) st: retry = 0; again: - USB_STOR_PRINTF("STATUS phase\n"); + debug("STATUS phase\n"); result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE, &actlen, USB_CNTL_TIMEOUT*5); /* special handling of STALL in STATUS phase */ if ((result < 0) && (retry < 1) && (us->pusb_dev->status & USB_ST_STALLED)) { - USB_STOR_PRINTF("STATUS:stall\n"); + debug("STATUS:stall\n"); /* clear the STALL on the endpoint */ result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in); if (result >= 0 && (retry++ < 1)) @@ -755,8 +747,8 @@ again: goto again; } if (result < 0) { - USB_STOR_PRINTF("usb_bulk_msg error status %ld\n", - us->pusb_dev->status); + debug("usb_bulk_msg error status %ld\n", + us->pusb_dev->status); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } @@ -771,27 +763,27 @@ again: if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0) pipe = srb->datalen - data_actlen; if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) { - USB_STOR_PRINTF("!CSWSIGNATURE\n"); + debug("!CSWSIGNATURE\n"); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) { - USB_STOR_PRINTF("!Tag\n"); + debug("!Tag\n"); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if (csw->bCSWStatus > CSWSTATUS_PHASE) { - USB_STOR_PRINTF(">PHASE\n"); + debug(">PHASE\n"); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if (csw->bCSWStatus == CSWSTATUS_PHASE) { - USB_STOR_PRINTF("=PHASE\n"); + debug("=PHASE\n"); usb_stor_BBB_reset(us); return USB_STOR_TRANSPORT_FAILED; } else if (data_actlen > srb->datalen) { - USB_STOR_PRINTF("transferred %dB instead of %ldB\n", - data_actlen, srb->datalen); + debug("transferred %dB instead of %ldB\n", + data_actlen, srb->datalen); return USB_STOR_TRANSPORT_FAILED; } else if (csw->bCSWStatus == CSWSTATUS_FAILED) { - USB_STOR_PRINTF("FAILED\n"); + debug("FAILED\n"); return USB_STOR_TRANSPORT_FAILED; } @@ -812,14 +804,14 @@ static int usb_stor_CB_transport(ccb *srb, struct us_data *us) /* issue the command */ do_retry: result = usb_stor_CB_comdat(srb, us); - USB_STOR_PRINTF("command / Data returned %d, status %lX\n", - result, us->pusb_dev->status); + debug("command / Data returned %d, status %lX\n", + result, us->pusb_dev->status); /* if this is an CBI Protocol, get IRQ */ if (us->protocol == US_PR_CBI) { status = usb_stor_CBI_get_status(srb, us); /* if the status is error, report it */ if (status == USB_STOR_TRANSPORT_ERROR) { - USB_STOR_PRINTF(" USB CBI Command Error\n"); + debug(" USB CBI Command Error\n"); return status; } srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8); @@ -827,7 +819,7 @@ do_retry: if (!us->ip_data) { /* if the status is good, report it */ if (status == USB_STOR_TRANSPORT_GOOD) { - USB_STOR_PRINTF(" USB CBI Command Good\n"); + debug(" USB CBI Command Good\n"); return status; } } @@ -835,7 +827,7 @@ do_retry: /* do we have to issue an auto request? */ /* HERE we have to check the result */ if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) { - USB_STOR_PRINTF("ERROR %lX\n", us->pusb_dev->status); + debug("ERROR %lX\n", us->pusb_dev->status); us->transport_reset(us); return USB_STOR_TRANSPORT_ERROR; } @@ -843,7 +835,7 @@ do_retry: ((srb->cmd[0] == SCSI_REQ_SENSE) || (srb->cmd[0] == SCSI_INQUIRY))) { /* do not issue an autorequest after request sense */ - USB_STOR_PRINTF("No auto request and good\n"); + debug("No auto request and good\n"); return USB_STOR_TRANSPORT_GOOD; } /* issue an request_sense */ @@ -856,19 +848,19 @@ do_retry: psrb->cmdlen = 12; /* issue the command */ result = usb_stor_CB_comdat(psrb, us); - USB_STOR_PRINTF("auto request returned %d\n", result); + debug("auto request returned %d\n", result); /* if this is an CBI Protocol, get IRQ */ if (us->protocol == US_PR_CBI) status = usb_stor_CBI_get_status(psrb, us); if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) { - USB_STOR_PRINTF(" AUTO REQUEST ERROR %ld\n", - us->pusb_dev->status); + debug(" AUTO REQUEST ERROR %ld\n", + us->pusb_dev->status); return USB_STOR_TRANSPORT_ERROR; } - USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n", - srb->sense_buf[0], srb->sense_buf[2], - srb->sense_buf[12], srb->sense_buf[13]); + debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n", + srb->sense_buf[0], srb->sense_buf[2], + srb->sense_buf[12], srb->sense_buf[13]); /* Check the auto request result */ if ((srb->sense_buf[2] == 0) && (srb->sense_buf[12] == 0) && @@ -923,7 +915,7 @@ static int usb_inquiry(ccb *srb, struct us_data *ss) srb->datalen = 36; srb->cmdlen = 12; i = ss->transport(srb, ss); - USB_STOR_PRINTF("inquiry returns %d\n", i); + debug("inquiry returns %d\n", i); if (i == 0) break; } while (--retry); @@ -948,9 +940,9 @@ static int usb_request_sense(ccb *srb, struct us_data *ss) srb->pdata = &srb->sense_buf[0]; srb->cmdlen = 12; ss->transport(srb, ss); - USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n", - srb->sense_buf[2], srb->sense_buf[12], - srb->sense_buf[13]); + debug("Request Sense returned %02X %02X %02X\n", + srb->sense_buf[2], srb->sense_buf[12], + srb->sense_buf[13]); srb->pdata = (uchar *)ptr; return 0; } @@ -1017,7 +1009,7 @@ static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start, srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff; srb->cmd[8] = (unsigned char) blocks & 0xff; srb->cmdlen = 12; - USB_STOR_PRINTF("read10: start %lx blocks %x\n", start, blocks); + debug("read10: start %lx blocks %x\n", start, blocks); return ss->transport(srb, ss); } @@ -1034,7 +1026,7 @@ static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start, srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff; srb->cmd[8] = (unsigned char) blocks & 0xff; srb->cmdlen = 12; - USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks); + debug("write10: start %lx blocks %x\n", start, blocks); return ss->transport(srb, ss); } @@ -1078,7 +1070,7 @@ unsigned long usb_stor_read(int device, unsigned long blknr, device &= 0xff; /* Setup device */ - USB_STOR_PRINTF("\nusb_read: dev %d \n", device); + debug("\nusb_read: dev %d \n", device); dev = NULL; for (i = 0; i < USB_MAX_DEVICE; i++) { dev = usb_get_dev_index(i); @@ -1095,8 +1087,8 @@ unsigned long usb_stor_read(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF - " buffer %lx\n", device, start, blks, buf_addr); + debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF + " buffer %lx\n", device, start, blks, buf_addr); do { /* XXX need some comment here */ @@ -1112,7 +1104,7 @@ retry_it: srb->datalen = usb_dev_desc[device].blksz * smallblks; srb->pdata = (unsigned char *)buf_addr; if (usb_read_10(srb, ss, start, smallblks)) { - USB_STOR_PRINTF("Read ERROR\n"); + debug("Read ERROR\n"); usb_request_sense(srb, ss); if (retry--) goto retry_it; @@ -1125,9 +1117,9 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_read: end startblk " LBAF - ", blccnt %x buffer %lx\n", - start, smallblks, buf_addr); + debug("usb_read: end startblk " LBAF + ", blccnt %x buffer %lx\n", + start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_XFER_BLK) @@ -1151,7 +1143,7 @@ unsigned long usb_stor_write(int device, unsigned long blknr, device &= 0xff; /* Setup device */ - USB_STOR_PRINTF("\nusb_write: dev %d \n", device); + debug("\nusb_write: dev %d \n", device); dev = NULL; for (i = 0; i < USB_MAX_DEVICE; i++) { dev = usb_get_dev_index(i); @@ -1169,8 +1161,8 @@ unsigned long usb_stor_write(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF - " buffer %lx\n", device, start, blks, buf_addr); + debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF + " buffer %lx\n", device, start, blks, buf_addr); do { /* If write fails retry for max retry count else @@ -1188,7 +1180,7 @@ retry_it: srb->datalen = usb_dev_desc[device].blksz * smallblks; srb->pdata = (unsigned char *)buf_addr; if (usb_write_10(srb, ss, start, smallblks)) { - USB_STOR_PRINTF("Write ERROR\n"); + debug("Write ERROR\n"); usb_request_sense(srb, ss); if (retry--) goto retry_it; @@ -1201,9 +1193,8 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_write: end startblk " LBAF - ", blccnt %x buffer %lx\n", - start, smallblks, buf_addr); + debug("usb_write: end startblk " LBAF ", blccnt %x buffer %lx\n", + start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ if (blkcnt >= USB_MAX_XFER_BLK) @@ -1218,6 +1209,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, { struct usb_interface *iface; int i; + struct usb_endpoint_descriptor *ep_desc; unsigned int flags = 0; int protocol = 0; @@ -1228,12 +1220,12 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, #if 0 /* this is the place to patch some storage devices */ - USB_STOR_PRINTF("iVendor %X iProduct %X\n", dev->descriptor.idVendor, + debug("iVendor %X iProduct %X\n", dev->descriptor.idVendor, dev->descriptor.idProduct); if ((dev->descriptor.idVendor) == 0x066b && (dev->descriptor.idProduct) == 0x0103) { - USB_STOR_PRINTF("patched for E-USB\n"); + debug("patched for E-USB\n"); protocol = US_PR_CB; subclass = US_SC_UFI; /* an assumption */ } @@ -1250,7 +1242,7 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, memset(ss, 0, sizeof(struct us_data)); /* At this point, we know we've got a live one */ - USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n"); + debug("\n\nUSB Mass Storage device detected\n"); /* Initialize the us_data structure with some useful info */ ss->flags = flags; @@ -1270,21 +1262,21 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, } /* set the handler pointers based on the protocol */ - USB_STOR_PRINTF("Transport: "); + debug("Transport: "); switch (ss->protocol) { case US_PR_CB: - USB_STOR_PRINTF("Control/Bulk\n"); + debug("Control/Bulk\n"); ss->transport = usb_stor_CB_transport; ss->transport_reset = usb_stor_CB_reset; break; case US_PR_CBI: - USB_STOR_PRINTF("Control/Bulk/Interrupt\n"); + debug("Control/Bulk/Interrupt\n"); ss->transport = usb_stor_CB_transport; ss->transport_reset = usb_stor_CB_reset; break; case US_PR_BULK: - USB_STOR_PRINTF("Bulk/Bulk/Bulk\n"); + debug("Bulk/Bulk/Bulk\n"); ss->transport = usb_stor_BBB_transport; ss->transport_reset = usb_stor_BBB_reset; break; @@ -1300,34 +1292,35 @@ int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, * We will ignore any others. */ for (i = 0; i < iface->desc.bNumEndpoints; i++) { + ep_desc = &iface->ep_desc[i]; /* is it an BULK endpoint? */ - if ((iface->ep_desc[i].bmAttributes & + if ((ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { - if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN) - ss->ep_in = iface->ep_desc[i].bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK; + if (ep_desc->bEndpointAddress & USB_DIR_IN) + ss->ep_in = ep_desc->bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; else ss->ep_out = - iface->ep_desc[i].bEndpointAddress & + ep_desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; } /* is it an interrupt endpoint? */ - if ((iface->ep_desc[i].bmAttributes & - USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { - ss->ep_int = iface->ep_desc[i].bEndpointAddress & - USB_ENDPOINT_NUMBER_MASK; - ss->irqinterval = iface->ep_desc[i].bInterval; + if ((ep_desc->bmAttributes & + USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { + ss->ep_int = ep_desc->bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ss->irqinterval = ep_desc->bInterval; } } - USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n", - ss->ep_in, ss->ep_out, ss->ep_int); + debug("Endpoints In %d Out %d Int %d\n", + ss->ep_in, ss->ep_out, ss->ep_int); /* Do some basic sanity checks, and bail if we find a problem */ if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) || !ss->ep_in || !ss->ep_out || (ss->protocol == US_PR_CBI && ss->ep_int == 0)) { - USB_STOR_PRINTF("Problems with device\n"); + debug("Problems with device\n"); return 0; } /* set class specific stuff */ @@ -1366,7 +1359,7 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, dev_desc->target = dev->devnum; pccb->lun = dev_desc->lun; - USB_STOR_PRINTF(" address %d\n", dev_desc->target); + debug(" address %d\n", dev_desc->target); if (usb_inquiry(pccb, ss)) return -1; @@ -1392,8 +1385,8 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor, (uchar *)dev_desc->product); #endif /* CONFIG_USB_BIN_FIXUP */ - USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n", usb_stor_buf[2], - usb_stor_buf[3]); + debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2], + usb_stor_buf[3]); if (usb_test_unit_ready(pccb, ss)) { printf("Device NOT ready\n" " Request Sense returned %02X %02X %02X\n", @@ -1413,8 +1406,7 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, cap[1] = 0x200; } ss->flags &= ~USB_READY; - USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0], - cap[1]); + debug("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0], cap[1]); #if 0 if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */ cap[0] >>= 16; @@ -1426,17 +1418,16 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, cap[0] += 1; capacity = &cap[0]; blksz = &cap[1]; - USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n", - *capacity, *blksz); + debug("Capacity = 0x%lx, blocksz = 0x%lx\n", *capacity, *blksz); dev_desc->lba = *capacity; dev_desc->blksz = *blksz; dev_desc->log2blksz = LOG2(dev_desc->blksz); dev_desc->type = perq; - USB_STOR_PRINTF(" address %d\n", dev_desc->target); - USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type); + debug(" address %d\n", dev_desc->target); + debug("partype: %d\n", dev_desc->part_type); init_part(dev_desc); - USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type); + debug("partype: %d\n", dev_desc->part_type); return 1; } @@ -250,11 +250,10 @@ CPPFLAGS += -I$(TOPDIR)/include CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS) -ifdef BUILD_TAG -CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \ - -DBUILD_TAG='"$(BUILD_TAG)"' -else CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes + +ifdef BUILD_TAG +CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' endif CFLAGS_SSP := $(call cc-option,-fno-stack-protector) diff --git a/doc/README.b4860qds b/doc/README.b4860qds index f6c5ff8..bd10a6d 100644 --- a/doc/README.b4860qds +++ b/doc/README.b4860qds @@ -185,7 +185,7 @@ Start Address End Address Description Size 0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB 0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB 0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB -0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB +0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB 0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB 0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB 0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB @@ -215,7 +215,7 @@ Start Address End Address Description Size 0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB 0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB 0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB -0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB +0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB 0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB 0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB 0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 5963f78..95a88a7 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -49,6 +49,12 @@ the features of each board in the device tree file, and have a single generic source base. To enable this feature, add CONFIG_OF_CONTROL to your board config file. +It is currently supported on ARM, x86 and Microblaze - other architectures +will need to add code to their arch/xxx/lib/board.c file to locate the +FDT. Alternatively you can enable generic board support on your board +(with CONFIG_SYS_GENERIC_BOARD) if this is available (as it is for +PowerPC). For ARM, Tegra and Exynos5 have device trees available for +common devices. What is a Flat Device Tree? @@ -99,7 +105,8 @@ Then run the compiler (your version will vary): * Bad configuration: 0 * Strange test result: 0 -You will also find a useful ftdump utility for decoding a binary file. +You will also find a useful fdtdump utility for decoding a binary file, as +well as fdtget/fdtput for reading and writing properties in a binary file. Where do I get an fdt file for my board? diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 2cdb8a9..9223f6e 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,8 +11,11 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -smdk6400 arm arm1176 - - Zhong Hongbo <bocui107@gmail.com> -ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de> +Alaska8220 powerpc mpc8220 - - +Yukon8220 powerpc mpc8220 - - +sorcery powerpc mpc8220 - - +smdk6400 arm arm1176 52587f1 2013-04-12 Zhong Hongbo <bocui107@gmail.com> +ns9750dev arm arm926ejs 4cfc611 2013-02-28 Markus Pietrek <mpietrek@fsforth.de> AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> diff --git a/doc/README.t4240qds b/doc/README.t4240qds index 677d120..a9841fb 100644 --- a/doc/README.t4240qds +++ b/doc/README.t4240qds @@ -86,7 +86,7 @@ The addresses in brackets are physical addresses. 0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB) 0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory -0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR +0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers) 0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan 0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan 0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO @@ -96,3 +96,27 @@ The addresses in brackets are physical addresses. 0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores The physical address of the last (boot page translation) varies with the actual DDR size. + +Voltage ID and VDD override +-------------------- +T4240 has a VID feature. U-boot reads the VID efuses and adjust the voltage +accordingly. The voltage can also be override by command vdd_override. The +syntax is + +vdd_override <voltage in mV>, eg. 1050 is for 1.050v. + +Upon success, the actual voltage will be read back. The value is checked +for safety and any invalid value will not adjust the voltage. + +Another way to override VDD is to use environmental variable, in case of using +command is too late for some debugging. The syntax is + +setenv t4240qds_vdd_mv <voltage in mV> +saveenv +reset + +The override voltage takes effect when booting. + +Note: voltage adjustment needs to be done step by step. Changing voltage too +rapidly may cause current surge. The voltage stepping is done by software. +Users can set the final voltage directly. diff --git a/doc/README.ubi b/doc/README.ubi index da2dfac..3cf4ef2 100644 --- a/doc/README.ubi +++ b/doc/README.ubi @@ -2,7 +2,8 @@ UBI usage in U-Boot ------------------- -Here the list of the currently implemented UBI commands: +UBI support in U-Boot is broken down into five separate commands. +The first is the ubi command, which has six subcommands: => help ubi ubi - ubi commands @@ -142,3 +143,80 @@ read 524288 bytes from volume 0 to 900000(buf address) => cmp.b 800000 900000 80000 Total of 524288 bytes were the same + + +Next, the ubifsmount command allows you to access filesystems on the +UBI partition which has been attached with the ubi part command: + +=> help ubifsmount +ubifsmount - mount UBIFS volume + +Usage: +ubifsmount <volume-name> + - mount 'volume-name' volume + +For example: + +=> ubifsmount ubi0:recovery +UBIFS: mounted UBI device 0, volume 0, name "recovery" +UBIFS: mounted read-only +UBIFS: file system size: 46473216 bytes (45384 KiB, 44 MiB, 366 LEBs) +UBIFS: journal size: 6348800 bytes (6200 KiB, 6 MiB, 50 LEBs) +UBIFS: media format: w4/r0 (latest is w4/r0) +UBIFS: default compressor: LZO +UBIFS: reserved for root: 0 bytes (0 KiB) + +Note that unlike Linux, U-Boot can only have one active UBI partition +at a time, which can be referred to as ubi0, and must be supplied along +with the name of the filesystem you are mounting. + + +Once a UBI filesystem has been mounted, the ubifsls command allows you +to list the contents of a directory in the filesystem: + + +=> help ubifsls +ubifsls - list files in a directory + +Usage: +ubifsls [directory] + - list files in a 'directory' (default '/') + +For example: + +=> ubifsls + 17442 Thu Jan 01 02:57:38 1970 imx28-evk.dtb + 2998146 Thu Jan 01 02:57:43 1970 zImage + + +And the ubifsload command allows you to load a file from a UBI +filesystem: + + +=> help ubifsload +ubifsload - load file from an UBIFS filesystem + +Usage: +ubifsload <addr> <filename> [bytes] + - load file 'filename' to address 'addr' + +For example: + +=> ubifsload ${loadaddr} zImage +Loading file 'zImage' to addr 0x42000000 with size 2998146 (0x002dbf82)... +Done + + +Finally, you can unmount the UBI filesystem with the ubifsumount +command: + +=> help ubifsumount +ubifsumount - unmount UBIFS volume + +Usage: +ubifsumount - unmount current volume + +For example: + +=> ubifsumount +Unmounting UBIFS volume recovery! diff --git a/doc/README.watchdog b/doc/README.watchdog index 33f31c2..59f306b 100644 --- a/doc/README.watchdog +++ b/doc/README.watchdog @@ -30,3 +30,6 @@ CONFIG_IMX_WATCHDOG CONFIG_XILINX_TB_WATCHDOG Available for Xilinx Axi platforms to service timebase watchdog timer. + +CONFIG_BFIN_WATCHDOG + Available for bf5xx and bf6xx to service the watchdog. diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network index e5a198f..9b63791 100644 --- a/doc/SPL/README.am335x-network +++ b/doc/SPL/README.am335x-network @@ -7,7 +7,7 @@ NAND and bricked (empty) board with only a network cable. I. Building the required images 1. You have to enable generic SPL configuration options (see -docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, +doc/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build SPL with support for booting over the network. Also you have to enable diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt index c2cf2d5..6a592b3 100644 --- a/doc/driver-model/UDM-pci.txt +++ b/doc/driver-model/UDM-pci.txt @@ -201,11 +201,7 @@ III) Analysis of in-tree drivers ----------------------------- Standard driver, uses indirect functions. - 12) powerpc/cpu/mpc8220/pci.c - ----------------------------- - Standard driver, specifies all read/write functions separately. - - 13) powerpc/cpu/mpc85xx/pci.c + 12) powerpc/cpu/mpc85xx/pci.c ----------------------------- Standard driver, uses indirect functions, has two busses. diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9df1e26..f77c1ec 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -47,6 +47,8 @@ COBJS-$(CONFIG_OMAP_GPIO) += omap_gpio.o COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o COBJS-$(CONFIG_S3C2440_GPIO) += s3c2440_gpio.o +COBJS-$(CONFIG_XILINX_GPIO) += xilinx_gpio.o +COBJS-$(CONFIG_ADI_GPIO2) += adi_gpio2.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c new file mode 100644 index 0000000..7a034eb --- /dev/null +++ b/drivers/gpio/adi_gpio2.c @@ -0,0 +1,440 @@ +/* + * ADI GPIO2 Abstraction Layer + * Support BF54x, BF60x and future processors. + * + * Copyright 2008-2013 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/portmux.h> + +static struct gpio_port_t * const gpio_array[] = { + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, +#if defined(CONFIG_BF54x) + (struct gpio_port_t *)PORTH_FER, + (struct gpio_port_t *)PORTI_FER, + (struct gpio_port_t *)PORTJ_FER, +#endif +}; + +#define RESOURCE_LABEL_SIZE 16 + +static struct str_ident { + char name[RESOURCE_LABEL_SIZE]; +} str_ident[MAX_RESOURCES]; + +static void gpio_error(unsigned gpio) +{ + printf("adi_gpio2: GPIO %d wasn't requested!\n", gpio); +} + +static void set_label(unsigned short ident, const char *label) +{ + if (label) { + strncpy(str_ident[ident].name, label, + RESOURCE_LABEL_SIZE); + str_ident[ident].name[RESOURCE_LABEL_SIZE - 1] = 0; + } +} + +static char *get_label(unsigned short ident) +{ + return *str_ident[ident].name ? str_ident[ident].name : "UNKNOWN"; +} + +static int cmp_label(unsigned short ident, const char *label) +{ + if (label == NULL) + printf("adi_gpio2: please provide none-null label\n"); + + if (label) + return strcmp(str_ident[ident].name, label); + else + return -EINVAL; +} + +#define map_entry(m, i) reserved_##m##_map[gpio_bank(i)] +#define is_reserved(m, i, e) (map_entry(m, i) & gpio_bit(i)) +#define reserve(m, i) (map_entry(m, i) |= gpio_bit(i)) +#define unreserve(m, i) (map_entry(m, i) &= ~gpio_bit(i)) +#define DECLARE_RESERVED_MAP(m, c) unsigned short reserved_##m##_map[c] + +static DECLARE_RESERVED_MAP(gpio, GPIO_BANK_NUM); +static DECLARE_RESERVED_MAP(peri, gpio_bank(MAX_RESOURCES)); + +inline int check_gpio(unsigned gpio) +{ +#if defined(CONFIG_BF54x) + if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 || + gpio == GPIO_PH14 || gpio == GPIO_PH15 || + gpio == GPIO_PJ14 || gpio == GPIO_PJ15) + return -EINVAL; +#endif + if (gpio >= MAX_GPIOS) + return -EINVAL; + return 0; +} + +static void port_setup(unsigned gpio, unsigned short usage) +{ +#if defined(CONFIG_BF54x) + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); +#else + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio); +#endif + SSYNC(); +} + +inline void portmux_setup(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + u16 function = P_FUNCT2MUX(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + pmux &= ~(0x3 << (2 * gpio_sub_n(ident))); + pmux |= (function & 0x3) << (2 * gpio_sub_n(ident)); + + gpio_array[gpio_bank(ident)]->port_mux = pmux; +} + +inline u16 get_portmux(unsigned short per) +{ + u32 pmux; + u16 ident = P_IDENT(per); + + pmux = gpio_array[gpio_bank(ident)]->port_mux; + + return pmux >> (2 * gpio_sub_n(ident)) & 0x3; +} + +unsigned short get_gpio_dir(unsigned gpio) +{ + return 0x01 & + (gpio_array[gpio_bank(gpio)]->dir_clear >> gpio_sub_n(gpio)); +} + +/*********************************************************** +* +* FUNCTIONS: Peripheral Resource Allocation +* and PortMux Setup +* +* INPUTS/OUTPUTS: +* per Peripheral Identifier +* label String +* +* DESCRIPTION: Peripheral Resource Allocation and Setup API +**************************************************************/ + +int peripheral_request(unsigned short per, const char *label) +{ + unsigned short ident = P_IDENT(per); + + /* + * Don't cares are pins with only one dedicated function + */ + + if (per & P_DONTCARE) + return 0; + + if (!(per & P_DEFINED)) + return -ENODEV; + + BUG_ON(ident >= MAX_RESOURCES); + + /* If a pin can be muxed as either GPIO or peripheral, make + * sure it is not already a GPIO pin when we request it. + */ + if (unlikely(!check_gpio(ident) && is_reserved(gpio, ident, 1))) { + printf("%s: Peripheral %d is already reserved as GPIO by %s!\n", + __func__, ident, get_label(ident)); + return -EBUSY; + } + + if (unlikely(is_reserved(peri, ident, 1))) { + /* + * Pin functions like AMC address strobes my + * be requested and used by several drivers + */ + + if (!((per & P_MAYSHARE) && + get_portmux(per) == P_FUNCT2MUX(per))) { + /* + * Allow that the identical pin function can + * be requested from the same driver twice + */ + + if (cmp_label(ident, label) == 0) + goto anyway; + + printf("%s: Peripheral %d function %d is already " + "reserved by %s!\n", __func__, ident, + P_FUNCT2MUX(per), get_label(ident)); + return -EBUSY; + } + } + + anyway: + reserve(peri, ident); + + portmux_setup(per); + port_setup(ident, PERIPHERAL_USAGE); + + set_label(ident, label); + + return 0; +} + +int peripheral_request_list(const unsigned short per[], const char *label) +{ + u16 cnt; + int ret; + + for (cnt = 0; per[cnt] != 0; cnt++) { + ret = peripheral_request(per[cnt], label); + + if (ret < 0) { + for (; cnt > 0; cnt--) + peripheral_free(per[cnt - 1]); + + return ret; + } + } + + return 0; +} + +void peripheral_free(unsigned short per) +{ + unsigned short ident = P_IDENT(per); + + if (per & P_DONTCARE) + return; + + if (!(per & P_DEFINED)) + return; + + if (unlikely(!is_reserved(peri, ident, 0))) + return; + + if (!(per & P_MAYSHARE)) + port_setup(ident, GPIO_USAGE); + + unreserve(peri, ident); + + set_label(ident, "free"); +} + +void peripheral_free_list(const unsigned short per[]) +{ + u16 cnt; + for (cnt = 0; per[cnt] != 0; cnt++) + peripheral_free(per[cnt]); +} + +/*********************************************************** +* +* FUNCTIONS: GPIO Driver +* +* INPUTS/OUTPUTS: +* gpio PIO Number between 0 and MAX_GPIOS +* label String +* +* DESCRIPTION: GPIO Driver API +**************************************************************/ + +int gpio_request(unsigned gpio, const char *label) +{ + if (check_gpio(gpio) < 0) + return -EINVAL; + + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(gpio, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved by %s!\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved as Peripheral " + "by %s!\n", gpio, get_label(gpio)); + return -EBUSY; + } + + reserve(gpio, gpio); + set_label(gpio, label); + + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +int gpio_free(unsigned gpio) +{ + if (check_gpio(gpio) < 0) + return -1; + + if (unlikely(!is_reserved(gpio, gpio, 0))) { + gpio_error(gpio); + return -1; + } + + unreserve(gpio, gpio); + + set_label(gpio, "free"); + + return 0; +} + +#ifdef ADI_SPECIAL_GPIO_BANKS +static DECLARE_RESERVED_MAP(special_gpio, gpio_bank(MAX_RESOURCES)); + +int special_gpio_request(unsigned gpio, const char *label) +{ + /* + * Allow that the identical GPIO can + * be requested from the same driver twice + * Do nothing and return - + */ + + if (cmp_label(gpio, label) == 0) + return 0; + + if (unlikely(is_reserved(special_gpio, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved by %s!\n", + gpio, get_label(gpio)); + return -EBUSY; + } + if (unlikely(is_reserved(peri, gpio, 1))) { + printf("adi_gpio2: GPIO %d is already reserved as Peripheral " + "by %s!\n", gpio, get_label(gpio)); + + return -EBUSY; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + + set_label(gpio, label); + port_setup(gpio, GPIO_USAGE); + + return 0; +} + +void special_gpio_free(unsigned gpio) +{ + if (unlikely(!is_reserved(special_gpio, gpio, 0))) { + gpio_error(gpio); + return; + } + + reserve(special_gpio, gpio); + reserve(peri, gpio); + set_label(gpio, "free"); +} +#endif + +static inline void __gpio_direction_input(unsigned gpio) +{ + gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); +#if defined(CONFIG_BF54x) + gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio); +#endif +} + +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + __gpio_direction_input(gpio); + local_irq_restore(flags); + + return 0; +} + +int gpio_set_value(unsigned gpio, int arg) +{ + if (arg) + gpio_array[gpio_bank(gpio)]->data_set = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->data_clear = gpio_bit(gpio); + + return 0; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + + if (!is_reserved(gpio, gpio, 0)) { + gpio_error(gpio); + return -EINVAL; + } + + local_irq_save(flags); + +#if defined(CONFIG_BF54x) + gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); +#else + gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio); +#endif + gpio_set_value(gpio, value); + gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); + + local_irq_restore(flags); + + return 0; +} + +int gpio_get_value(unsigned gpio) +{ + return 1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio)); +} + +void gpio_labels(void) +{ + int c, gpio; + + for (c = 0; c < MAX_RESOURCES; c++) { + gpio = is_reserved(gpio, c, 1); + if (!check_gpio(c) && gpio) + printf("GPIO_%d:\t%s\tGPIO %s\n", c, get_label(c), + get_gpio_dir(c) ? "OUTPUT" : "INPUT"); + else if (is_reserved(peri, c, 1)) + printf("GPIO_%d:\t%s\tPeripheral\n", c, get_label(c)); + else + continue; + } +} diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c new file mode 100644 index 0000000..37fb0c5 --- /dev/null +++ b/drivers/gpio/xilinx_gpio.c @@ -0,0 +1,364 @@ +/* + * Copyright (c) 2013 Xilinx, Michal Simek + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <errno.h> +#include <malloc.h> +#include <linux/list.h> +#include <asm/io.h> +#include <asm/gpio.h> + +static LIST_HEAD(gpio_list); + +enum gpio_direction { + GPIO_DIRECTION_OUT = 0, + GPIO_DIRECTION_IN = 1, +}; + +/* Gpio simple map */ +struct gpio_regs { + u32 gpiodata; + u32 gpiodir; +}; + +#define GPIO_NAME_SIZE 10 + +struct gpio_names { + char name[GPIO_NAME_SIZE]; +}; + +/* Initialized, rxbd_current, rx_first_buf must be 0 after init */ +struct xilinx_gpio_priv { + struct gpio_regs *regs; + u32 gpio_min; + u32 gpio_max; + u32 gpiodata_store; + char name[GPIO_NAME_SIZE]; + struct list_head list; + struct gpio_names *gpio_name; +}; + +/* Store number of allocated gpio pins */ +static u32 xilinx_gpio_max; + +/* Get associated gpio controller */ +static struct xilinx_gpio_priv *gpio_get_controller(unsigned gpio) +{ + struct list_head *entry; + struct xilinx_gpio_priv *priv = NULL; + + list_for_each(entry, &gpio_list) { + priv = list_entry(entry, struct xilinx_gpio_priv, list); + if (gpio >= priv->gpio_min && gpio <= priv->gpio_max) { + debug("%s: reg: %x, min-max: %d-%d\n", __func__, + (u32)priv->regs, priv->gpio_min, priv->gpio_max); + return priv; + } + } + puts("!!!Can't get gpio controller!!!\n"); + return NULL; +} + +/* Get gpio pin name if used/setup */ +static char *get_name(unsigned gpio) +{ + u32 gpio_priv; + struct xilinx_gpio_priv *priv; + + debug("%s\n", __func__); + + priv = gpio_get_controller(gpio); + if (priv) { + gpio_priv = gpio - priv->gpio_min; + + return *priv->gpio_name[gpio_priv].name ? + priv->gpio_name[gpio_priv].name : "UNKNOWN"; + } + return "UNKNOWN"; +} + +/* Get output value */ +static int gpio_get_output_value(unsigned gpio) +{ + u32 val, gpio_priv; + struct xilinx_gpio_priv *priv = gpio_get_controller(gpio); + + if (priv) { + gpio_priv = gpio - priv->gpio_min; + val = !!(priv->gpiodata_store & (1 << gpio_priv)); + debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__, + (u32)priv->regs, gpio_priv, val); + + return val; + } + return -1; +} + +/* Get input value */ +static int gpio_get_input_value(unsigned gpio) +{ + u32 val, gpio_priv; + struct gpio_regs *regs; + struct xilinx_gpio_priv *priv = gpio_get_controller(gpio); + + if (priv) { + regs = priv->regs; + gpio_priv = gpio - priv->gpio_min; + val = readl(®s->gpiodata); + val = !!(val & (1 << gpio_priv)); + debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__, + (u32)priv->regs, gpio_priv, val); + + return val; + } + return -1; +} + +/* Set gpio direction */ +static int gpio_set_direction(unsigned gpio, enum gpio_direction direction) +{ + u32 val, gpio_priv; + struct gpio_regs *regs; + struct xilinx_gpio_priv *priv = gpio_get_controller(gpio); + + if (priv) { + regs = priv->regs; + val = readl(®s->gpiodir); + + gpio_priv = gpio - priv->gpio_min; + if (direction == GPIO_DIRECTION_OUT) + val &= ~(1 << gpio_priv); + else + val |= 1 << gpio_priv; + + writel(val, ®s->gpiodir); + debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__, + (u32)priv->regs, gpio_priv, val); + + return 0; + } + + return -1; +} + +/* Get gpio direction */ +static int gpio_get_direction(unsigned gpio) +{ + u32 val, gpio_priv; + struct gpio_regs *regs; + struct xilinx_gpio_priv *priv = gpio_get_controller(gpio); + + if (priv) { + regs = priv->regs; + gpio_priv = gpio - priv->gpio_min; + val = readl(®s->gpiodir); + val = !!(val & (1 << gpio_priv)); + debug("%s: reg: %x, gpio_no: %d, dir: %d\n", __func__, + (u32)priv->regs, gpio_priv, val); + + return val; + } + + return -1; +} + +/* + * Get input value + * for example gpio setup to output only can't get input value + * which is breaking gpio toggle command + */ +int gpio_get_value(unsigned gpio) +{ + u32 val; + + if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT) + val = gpio_get_output_value(gpio); + else + val = gpio_get_input_value(gpio); + + return val; +} + +/* Set output value */ +static int gpio_set_output_value(unsigned gpio, int value) +{ + u32 val, gpio_priv; + struct gpio_regs *regs; + struct xilinx_gpio_priv *priv = gpio_get_controller(gpio); + + if (priv) { + regs = priv->regs; + gpio_priv = gpio - priv->gpio_min; + val = priv->gpiodata_store; + if (value) + val |= 1 << gpio_priv; + else + val &= ~(1 << gpio_priv); + + writel(val, ®s->gpiodata); + debug("%s: reg: %x, gpio_no: %d, output_val: %d\n", __func__, + (u32)priv->regs, gpio_priv, val); + priv->gpiodata_store = val; + + return 0; + } + + return -1; +} + +int gpio_set_value(unsigned gpio, int value) +{ + if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT) + return gpio_set_output_value(gpio, value); + + return -1; +} + +/* Set GPIO as input */ +int gpio_direction_input(unsigned gpio) +{ + debug("%s\n", __func__); + return gpio_set_direction(gpio, GPIO_DIRECTION_IN); +} + +/* Setup GPIO as output and set output value */ +int gpio_direction_output(unsigned gpio, int value) +{ + int ret = gpio_set_direction(gpio, GPIO_DIRECTION_OUT); + + debug("%s\n", __func__); + + if (ret < 0) + return ret; + + return gpio_set_output_value(gpio, value); +} + +/* Show gpio status */ +void gpio_info(void) +{ + unsigned gpio; + + struct list_head *entry; + struct xilinx_gpio_priv *priv = NULL; + + list_for_each(entry, &gpio_list) { + priv = list_entry(entry, struct xilinx_gpio_priv, list); + printf("\n%s: %s/%x (%d-%d)\n", __func__, priv->name, + (u32)priv->regs, priv->gpio_min, priv->gpio_max); + + for (gpio = priv->gpio_min; gpio <= priv->gpio_max; gpio++) { + printf("GPIO_%d:\t%s is an ", gpio, get_name(gpio)); + if (gpio_get_direction(gpio) == GPIO_DIRECTION_OUT) + printf("OUTPUT value = %d\n", + gpio_get_output_value(gpio)); + else + printf("INPUT value = %d\n", + gpio_get_input_value(gpio)); + } + } +} + +int gpio_request(unsigned gpio, const char *label) +{ + u32 gpio_priv; + struct xilinx_gpio_priv *priv; + + if (gpio >= xilinx_gpio_max) + return -EINVAL; + + priv = gpio_get_controller(gpio); + if (priv) { + gpio_priv = gpio - priv->gpio_min; + + if (label != NULL) { + strncpy(priv->gpio_name[gpio_priv].name, label, + GPIO_NAME_SIZE); + priv->gpio_name[gpio_priv].name[GPIO_NAME_SIZE - 1] = + '\0'; + } + return 0; + } + + return -1; +} + +int gpio_free(unsigned gpio) +{ + u32 gpio_priv; + struct xilinx_gpio_priv *priv; + + if (gpio >= xilinx_gpio_max) + return -EINVAL; + + priv = gpio_get_controller(gpio); + if (priv) { + gpio_priv = gpio - priv->gpio_min; + priv->gpio_name[gpio_priv].name[0] = '\0'; + + /* Do nothing here */ + return 0; + } + + return -1; +} + +int gpio_alloc(u32 baseaddr, const char *name, u32 gpio_no) +{ + struct xilinx_gpio_priv *priv; + + priv = calloc(1, sizeof(struct xilinx_gpio_priv)); + + /* Setup gpio name */ + if (name != NULL) { + strncpy(priv->name, name, GPIO_NAME_SIZE); + priv->name[GPIO_NAME_SIZE - 1] = '\0'; + } + priv->regs = (struct gpio_regs *)baseaddr; + + priv->gpio_min = xilinx_gpio_max; + xilinx_gpio_max = priv->gpio_min + gpio_no; + priv->gpio_max = xilinx_gpio_max - 1; + + priv->gpio_name = calloc(gpio_no, sizeof(struct gpio_names)); + + INIT_LIST_HEAD(&priv->list); + list_add_tail(&priv->list, &gpio_list); + + printf("%s: Add %s (%d-%d)\n", __func__, name, + priv->gpio_min, priv->gpio_max); + + /* Return the first gpio allocated for this device */ + return priv->gpio_min; +} + +/* Dual channel gpio is one IP with two independent channels */ +int gpio_alloc_dual(u32 baseaddr, const char *name, u32 gpio_no0, u32 gpio_no1) +{ + int ret; + + ret = gpio_alloc(baseaddr, name, gpio_no0); + gpio_alloc(baseaddr + 8, strcat((char *)name, "_1"), gpio_no1); + + /* Return the first gpio allocated for this device */ + return ret; +} diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 7cd4281..24648a2 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -25,14 +25,11 @@ include $(TOPDIR)/config.mk LIB := $(obj)libmmc.o -ifdef CONFIG_SPL_BUILD -COBJS-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o -endif COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o -COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o +COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o @@ -46,6 +43,7 @@ COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o +COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index e2379e3..5aa2184 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -285,8 +285,11 @@ dmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) */ if (bytes_left > fifo_bytes) dmmc_wait_fifo_status(regs, 0x4a); - else if (bytes_left == fifo_bytes) + else if (bytes_left == fifo_bytes) { dmmc_wait_fifo_status(regs, 0x40); + if (cmd->cmdidx == MMC_CMD_SEND_EXT_CSD) + udelay(600); + } for (i = 0; bytes_left && (i < fifo_words); i++) { cmddata = get_val(®s->mmcdrr); diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index e945c0a..861f4b9 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -178,7 +178,7 @@ static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data) int timeout; struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base; -#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO +#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO uint wml_value; wml_value = data->blocksize/4; @@ -601,8 +601,7 @@ int fsl_esdhc_mmc_init(bd_t *bis) { struct fsl_esdhc_cfg *cfg; - cfg = malloc(sizeof(struct fsl_esdhc_cfg)); - memset(cfg, 0, sizeof(struct fsl_esdhc_cfg)); + cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1); cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR; cfg->sdhc_clk = gd->arch.sdhc_clk; return fsl_esdhc_initialize(bis, cfg); diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c deleted file mode 100644 index 42f0e0c..0000000 --- a/drivers/mmc/ftsdc010_esdhc.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <mmc.h> - -#include <asm/io.h> -#include <faraday/ftsdc010.h> - -/* - * supported mmc hosts - * setting the number CONFIG_FTSDC010_NUMBER in your configuration file. - */ -static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER]; -static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER]; - -static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index) -{ - return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index; -} - -#ifdef DEBUG -static void ftsdc010_dump_reg(struct mmc_host *host) -{ - debug("cmd: %08x\n", readl(&host->reg->cmd)); - debug("argu: %08x\n", readl(&host->reg->argu)); - debug("rsp0: %08x\n", readl(&host->reg->rsp0)); - debug("rsp1: %08x\n", readl(&host->reg->rsp1)); - debug("rsp2: %08x\n", readl(&host->reg->rsp2)); - debug("rsp3: %08x\n", readl(&host->reg->rsp3)); - debug("rsp_cmd: %08x\n", readl(&host->reg->rsp_cmd)); - debug("dcr: %08x\n", readl(&host->reg->dcr)); - debug("dtr: %08x\n", readl(&host->reg->dtr)); - debug("dlr: %08x\n", readl(&host->reg->dlr)); - debug("status: %08x\n", readl(&host->reg->status)); - debug("clr: %08x\n", readl(&host->reg->clr)); - debug("int_mask: %08x\n", readl(&host->reg->int_mask)); - debug("pcr: %08x\n", readl(&host->reg->pcr)); - debug("ccr: %08x\n", readl(&host->reg->ccr)); - debug("bwr: %08x\n", readl(&host->reg->bwr)); - debug("dwr: %08x\n", readl(&host->reg->dwr)); - debug("feature: %08x\n", readl(&host->reg->feature)); - debug("rev: %08x\n", readl(&host->reg->rev)); -} -#endif - -static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask) -{ - unsigned int newmask; - - newmask = readl(®->int_mask); - newmask |= imask; - - writel(newmask, ®->int_mask); - - return newmask; -} - -static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size) -{ - unsigned int fifo; - unsigned int fifo_words; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get_data_buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - debug("%s: size: %08x\n", __func__, size); - - if (status & FTSDC010_STATUS_FIFO_ORUN) { - - debug("%s: FIFO OVERRUN: sta: %08x\n", - __func__, status); - - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo_words = fifo >> 2; - - while (fifo_words--) - *ptr++ = readl(&host->reg->dwr); - - /* - * for adding some delays for SD card to put - * data into FIFO again - */ - udelay(4*FTSDC010_DELAY_UNIT); - -#ifdef CONFIG_FTSDC010_SDIO - /* sdio allow non-power-of-2 blksz */ - if (fifo & 3) { - unsigned int n = fifo & 3; - unsigned int data = readl(&host->reg->dwr); - - unsigned char *p = (unsigned char *)ptr; - - while (n--) { - *p++ = data; - data >>= 8; - } - } -#endif - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static void ftsdc010_pio_write(struct mmc_host *host, const char *buf, - unsigned int size) -{ - unsigned int fifo; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get data buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - - if (status & FTSDC010_STATUS_FIFO_URUN) { - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo = (fifo + 3) >> 2; - - while (fifo--) { - writel(*ptr, &host->reg->dwr); - ptr++; - } - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check RSP TIMEOUT or FAIL */ - if (sta & FTSDC010_STATUS_RSP_TIMEOUT) { - /* RSP TIMEOUT */ - debug("%s: RSP timeout: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) { - /* clear response fail bit */ - debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } else if (sta & FTSDC010_STATUS_RSP_CRC_OK) { - - /* clear response CRC OK bit */ - clear |= FTSDC010_CLR_RSP_CRC_OK; - } - - writel(clear, &host->reg->clr); - return 0; -} - -static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check DATA TIMEOUT or FAIL */ - if (data) { - - /* Transfer Complete */ - if (sta & FTSDC010_STATUS_DATA_END) - clear |= FTSDC010_STATUS_DATA_END; - - /* Data CRC_OK */ - if (sta & FTSDC010_STATUS_DATA_CRC_OK) - clear |= FTSDC010_STATUS_DATA_CRC_OK; - - /* DATA TIMEOUT or DATA CRC FAIL */ - if (sta & FTSDC010_STATUS_DATA_TIMEOUT) { - /* DATA TIMEOUT */ - debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) { - /* DATA CRC FAIL */ - debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } - writel(clear, &host->reg->clr); - } - return 0; -} - -static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - -#ifdef CONFIG_FTSDC010_SDIO - unsigned int scon; -#endif - unsigned int ccon; - unsigned int mask, tmpmask; - unsigned int ret; - unsigned int sta, i; - - ret = 0; - - if (data) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else if (cmd->resp_type & MMC_RSP_PRESENT) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else - mask = FTSDC010_INT_MASK_CMD_SEND; - - /* write argu reg */ - debug("%s: argu: %08x\n", __func__, host->reg->argu); - writel(cmd->cmdarg, &host->reg->argu); - - /* setup commnad */ - ccon = FTSDC010_CMD_IDX(cmd->cmdidx); - - /* setup command flags */ - ccon |= FTSDC010_CMD_CMD_EN; - - /* - * This hardware didn't support specific commands for mapping - * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it. - */ - if (cmd->resp_type & MMC_RSP_PRESENT) { - ccon |= FTSDC010_CMD_NEED_RSP; - mask |= FTSDC010_INT_MASK_RSP_CRC_OK | - FTSDC010_INT_MASK_RSP_CRC_FAIL; - } - - if (cmd->resp_type & MMC_RSP_136) - ccon |= FTSDC010_CMD_LONG_RSP; - - /* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */ - if (host->last_opcode == MMC_CMD_APP_CMD) - ccon |= FTSDC010_CMD_APP_CMD; - -#ifdef CONFIG_FTSDC010_SDIO - scon = readl(&host->reg->sdio_ctrl1); - if (host->card_type == MMC_TYPE_SDIO) - scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - else - scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - writel(scon, &host->reg->sdio_ctrl1); -#endif - - /* record last opcode for specifing the command type to hardware */ - host->last_opcode = cmd->cmdidx; - - /* write int_mask reg */ - tmpmask = readl(&host->reg->int_mask); - tmpmask |= mask; - writel(tmpmask, &host->reg->int_mask); - - /* write cmd reg */ - debug("%s: ccon: %08x\n", __func__, ccon); - writel(ccon, &host->reg->cmd); - - /* check CMD_SEND */ - for (i = 0; i < FTSDC010_CMD_RETRY; i++) { - /* - * If we read status register too fast - * will lead hardware error and the RSP_TIMEOUT - * flag will be raised incorrectly. - */ - udelay(16*FTSDC010_DELAY_UNIT); - sta = readl(&host->reg->status); - - /* Command Complete */ - /* - * Note: - * Do not clear FTSDC010_CLR_CMD_SEND flag. - * (by writing FTSDC010_CLR_CMD_SEND bit to clear register) - * It will make the driver becomes very slow. - * If the operation hasn't been finished, hardware will - * clear this bit automatically. - * In origin, the driver will clear this flag if there is - * no data need to be read. - */ - if (sta & FTSDC010_STATUS_CMD_SEND) - break; - } - - if (i > FTSDC010_CMD_RETRY) { - printf("%s: send command timeout\n", __func__); - return TIMEOUT; - } - - /* check rsp status */ - ret = ftsdc010_check_rsp(mmc, cmd, data); - if (ret) - return ret; - - /* read response if we have RSP_OK */ - if (ccon & FTSDC010_CMD_LONG_RSP) { - cmd->response[0] = readl(&host->reg->rsp3); - cmd->response[1] = readl(&host->reg->rsp2); - cmd->response[2] = readl(&host->reg->rsp1); - cmd->response[3] = readl(&host->reg->rsp0); - } else { - cmd->response[0] = readl(&host->reg->rsp0); - } - - /* read/write data */ - if (data && (data->flags & MMC_DATA_READ)) { - ftsdc010_pio_read(host, data->dest, - data->blocksize * data->blocks); - } else if (data && (data->flags & MMC_DATA_WRITE)) { - ftsdc010_pio_write(host, data->src, - data->blocksize * data->blocks); - } - - /* check data status */ - if (data) { - ret = ftsdc010_check_data(mmc, cmd, data); - if (ret) - return ret; - } - - udelay(FTSDC010_DELAY_UNIT); - return ret; -} - -static unsigned int cal_blksz(unsigned int blksz) -{ - unsigned int blksztwo = 0; - - while (blksz >>= 1) - blksztwo++; - - return blksztwo; -} - -static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int dcon, newmask; - - /* configure data transfer paramter */ - if (!data) - return 0; - - if (((data->blocksize - 1) & data->blocksize) != 0) { - printf("%s: can't do non-power-of 2 sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* - * We cannot deal with unaligned blocks with more than - * one block being transfered. - */ - if ((data->blocksize <= 2) && (data->blocks > 1)) { - printf("%s: can't do non-word sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* data length */ - dcon = data->blocksize * data->blocks; - writel(dcon, &host->reg->dlr); - - /* write data control */ - dcon = cal_blksz(data->blocksize); - - /* add to IMASK register */ - newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT); - - /* - * enable UNDERRUN will trigger interrupt immediatedly - * So setup it when rsp is received successfully - */ - if (data->flags & MMC_DATA_WRITE) { - dcon |= FTSDC010_DCR_DATA_WRITE; - } else { - dcon &= ~FTSDC010_DCR_DATA_WRITE; - newmask |= FTSDC010_STATUS_FIFO_ORUN; - } - enable_imask(host->reg, newmask); - -#ifdef CONFIG_FTSDC010_SDIO - /* always reset fifo since last transfer may fail */ - dcon |= FTSDC010_DCR_FIFO_RST; - - if (data->blocks > 1) - dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE; -#endif - - /* enable data transfer which will be pended until cmd is send */ - dcon |= FTSDC010_DCR_DATA_EN; - writel(dcon, &host->reg->dcr); - - return 0; -} - -static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (data) { - ret = ftsdc010_setup_data(mmc, data); - - if (ret) { - printf("%s: setup data error\n", __func__); - return -1; - } - - if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) { - printf("%s: data is both direction\n", __func__); - return -1; - } - } - - /* Send command */ - ret = ftsdc010_send_cmd(mmc, cmd, data); - return ret; -} - -static int ftsdc010_card_detect(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta; - - sta = readl(&host->reg->status); - debug("%s: card status: %08x\n", __func__, sta); - - return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1; -} - -static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (ftsdc010_card_detect(mmc) == 0) { - printf("%s: no medium present\n", __func__); - return -1; - } else { - ret = ftsdc010_send_request(mmc, cmd, data); - return ret; - } -} - -static void ftsdc010_set_clk(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned char clk_div; - unsigned int real_rate; - unsigned int clock; - - debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock); - clock = readl(&host->reg->ccr); - - if (mmc->clock == 0) { - real_rate = 0; - clock |= FTSDC010_CCR_CLK_DIS; - } else { - debug("%s, mmc->clock: %08x, origin clock: %08x\n", - __func__, mmc->clock, clock); - - for (clk_div = 0; clk_div <= 127; clk_div++) { - real_rate = (CONFIG_SYS_CLK_FREQ / 2) / - (2 * (clk_div + 1)); - - if (real_rate <= mmc->clock) - break; - } - - debug("%s: computed real_rate: %x, clk_div: %x\n", - __func__, real_rate, clk_div); - - if (clk_div > 127) - debug("%s: no match clock rate, %x\n", - __func__, mmc->clock); - - clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) | - FTSDC010_CCR_CLK_DIV(clk_div); - - clock &= ~FTSDC010_CCR_CLK_DIS; - } - - debug("%s, set clock: %08x\n", __func__, clock); - writel(clock, &host->reg->ccr); -} - -static void ftsdc010_set_ios(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int power; - unsigned long val; - unsigned int bus_width; - - debug("%s: bus_width: %x, clock: %d\n", - __func__, mmc->bus_width, mmc->clock); - - /* set pcr: power on */ - power = readl(&host->reg->pcr); - power |= FTSDC010_PCR_POWER_ON; - writel(power, &host->reg->pcr); - - if (mmc->clock) - ftsdc010_set_clk(mmc); - - /* set bwr: bus width reg */ - bus_width = readl(&host->reg->bwr); - bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS | - FTSDC010_BWR_SINGLE_BUS); - - if (mmc->bus_width == 8) - bus_width |= FTSDC010_BWR_WIDE_8_BUS; - else if (mmc->bus_width == 4) - bus_width |= FTSDC010_BWR_WIDE_4_BUS; - else - bus_width |= FTSDC010_BWR_SINGLE_BUS; - - writel(bus_width, &host->reg->bwr); - - /* set fifo depth */ - val = readl(&host->reg->feature); - host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */ - - /* set data timeout register */ - val = -1; - writel(val, &host->reg->dtr); -} - -static void ftsdc010_reset(struct mmc_host *host) -{ - unsigned int timeout; - unsigned int sta; - - /* Do SDC_RST: Software reset for all register */ - writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd); - - host->clock = 0; - - /* this hardware has no reset finish flag to read */ - /* wait 100ms maximum */ - timeout = 100; - - /* hw clears the bit when it's done */ - while (readl(&host->reg->dtr) != 0) { - if (timeout == 0) { - printf("%s: reset timeout error\n", __func__); - return; - } - timeout--; - udelay(10*FTSDC010_DELAY_UNIT); - } - - sta = readl(&host->reg->status); - if (sta & FTSDC010_STATUS_CARD_CHANGE) - writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr); -} - -static int ftsdc010_core_init(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int mask; - unsigned int major, minor, revision; - - /* get hardware version */ - host->version = readl(&host->reg->rev); - - major = FTSDC010_REV_MAJOR(host->version); - minor = FTSDC010_REV_MINOR(host->version); - revision = FTSDC010_REV_REVISION(host->version); - - printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision); - - /* Interrupt MASK register init - mask all */ - writel(0x0, &host->reg->int_mask); - - mask = FTSDC010_INT_MASK_CMD_SEND | - FTSDC010_INT_MASK_DATA_END | - FTSDC010_INT_MASK_CARD_CHANGE; -#ifdef CONFIG_FTSDC010_SDIO - mask |= FTSDC010_INT_MASK_CP_READY | - FTSDC010_INT_MASK_CP_BUF_READY | - FTSDC010_INT_MASK_PLAIN_TEXT_READY | - FTSDC010_INT_MASK_SDIO_IRPT; -#endif - - writel(mask, &host->reg->int_mask); - - return 0; -} - -int ftsdc010_mmc_init(int dev_index) -{ - struct mmc *mmc; - struct mmc_host *host; - - mmc = &ftsdc010_dev[dev_index]; - - sprintf(mmc->name, "FTSDC010 SD/MMC"); - mmc->priv = &ftsdc010_host[dev_index]; - mmc->send_cmd = ftsdc010_request; - mmc->set_ios = ftsdc010_set_ios; - mmc->init = ftsdc010_core_init; - mmc->getcd = NULL; - mmc->getwp = NULL; - - mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; - - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; - - mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128); - mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2; - - ftsdc010_host[dev_index].clock = 0; - ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index); - mmc_register(mmc); - - /* reset mmc */ - host = (struct mmc_host *)mmc->priv; - ftsdc010_reset(host); - - return 0; -} diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c new file mode 100644 index 0000000..562b14a --- /dev/null +++ b/drivers/mmc/ftsdc010_mci.c @@ -0,0 +1,377 @@ +/* + * Faraday MMC/SD Host Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su <dantesu@faraday-tech.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include <common.h> +#include <malloc.h> +#include <part.h> +#include <mmc.h> + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/byteorder.h> +#include <faraday/ftsdc010.h> + +#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ +#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */ + +struct ftsdc010_chip { + void __iomem *regs; + uint32_t wprot; /* write protected (locked) */ + uint32_t rate; /* actual SD clock in Hz */ + uint32_t sclk; /* FTSDC010 source clock in Hz */ + uint32_t fifo; /* fifo depth in bytes */ + uint32_t acmd; +}; + +static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + int ret = TIMEOUT; + uint32_t ts, st; + uint32_t cmd = FTSDC010_CMD_IDX(mmc_cmd->cmdidx); + uint32_t arg = mmc_cmd->cmdarg; + uint32_t flags = mmc_cmd->resp_type; + + cmd |= FTSDC010_CMD_CMD_EN; + + if (chip->acmd) { + cmd |= FTSDC010_CMD_APP_CMD; + chip->acmd = 0; + } + + if (flags & MMC_RSP_PRESENT) + cmd |= FTSDC010_CMD_NEED_RSP; + + if (flags & MMC_RSP_136) + cmd |= FTSDC010_CMD_LONG_RSP; + + writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND, + ®s->clr); + writel(arg, ®s->argu); + writel(cmd, ®s->cmd); + + if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) { + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + if (readl(®s->status) & FTSDC010_STATUS_CMD_SEND) { + writel(FTSDC010_STATUS_CMD_SEND, ®s->clr); + ret = 0; + break; + } + } + } else { + st = 0; + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + writel(st & FTSDC010_STATUS_RSP_MASK, ®s->clr); + if (st & FTSDC010_STATUS_RSP_MASK) + break; + } + if (st & FTSDC010_STATUS_RSP_CRC_OK) { + if (flags & MMC_RSP_136) { + mmc_cmd->response[0] = readl(®s->rsp3); + mmc_cmd->response[1] = readl(®s->rsp2); + mmc_cmd->response[2] = readl(®s->rsp1); + mmc_cmd->response[3] = readl(®s->rsp0); + } else { + mmc_cmd->response[0] = readl(®s->rsp0); + } + ret = 0; + } else { + debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n", + mmc_cmd->cmdidx, st); + } + } + + if (ret) { + debug("ftsdc010: cmd timeout (op code=%d)\n", + mmc_cmd->cmdidx); + } else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) { + chip->acmd = 1; + } + + return ret; +} + +static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t div; + + for (div = 0; div < 0x7f; ++div) { + if (rate >= chip->sclk / (2 * (div + 1))) + break; + } + chip->rate = chip->sclk / (2 * (div + 1)); + + writel(FTSDC010_CCR_CLK_DIV(div), ®s->ccr); + + if (IS_SD(mmc)) { + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_SD); + + if (chip->rate > 25000000) + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + else + clrbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + } +} + +static inline int ftsdc010_is_ro(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + const uint8_t *csd = (const uint8_t *)mmc->csd; + + return chip->wprot || (csd[1] & 0x30); +} + +static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask) +{ + int ret = TIMEOUT; + uint32_t st, ts; + + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + if (!(st & mask)) + continue; + writel(st & mask, ®s->clr); + ret = 0; + break; + } + + if (ret) + debug("ftsdc010: wait st(0x%x) timeout\n", mask); + + return ret; +} + +/* + * u-boot mmc api + */ + +static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int ret = UNUSABLE_ERR; + uint32_t len = 0; + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) { + printf("ftsdc010: the card is write protected!\n"); + return ret; + } + + if (data) { + uint32_t dcr; + + len = data->blocksize * data->blocks; + + /* 1. data disable + fifo reset */ + writel(FTSDC010_DCR_FIFO_RST, ®s->dcr); + + /* 2. clear status register */ + writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN + | FTSDC010_STATUS_FIFO_ORUN, ®s->clr); + + /* 3. data timeout (1 sec) */ + writel(chip->rate, ®s->dtr); + + /* 4. data length (bytes) */ + writel(len, ®s->dlr); + + /* 5. data enable */ + dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN; + if (data->flags & MMC_DATA_WRITE) + dcr |= FTSDC010_DCR_DATA_WRITE; + writel(dcr, ®s->dcr); + } + + ret = ftsdc010_send_cmd(mmc, cmd); + if (ret) { + printf("ftsdc010: CMD%d failed\n", cmd->cmdidx); + return ret; + } + + if (!data) + return ret; + + if (data->flags & MMC_DATA_WRITE) { + const uint8_t *buf = (const uint8_t *)data->src; + + while (len > 0) { + int wlen; + + /* wait for tx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN); + if (ret) + break; + + /* write bytes to ftsdc010 */ + for (wlen = 0; wlen < len && wlen < chip->fifo; ) { + writel(*(uint32_t *)buf, ®s->dwr); + buf += 4; + wlen += 4; + } + + len -= wlen; + } + + } else { + uint8_t *buf = (uint8_t *)data->dest; + + while (len > 0) { + int rlen; + + /* wait for rx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN); + if (ret) + break; + + /* fetch bytes from ftsdc010 */ + for (rlen = 0; rlen < len && rlen < chip->fifo; ) { + *(uint32_t *)buf = readl(®s->dwr); + buf += 4; + rlen += 4; + } + + len -= rlen; + } + + } + + if (!ret) { + ret = ftsdc010_wait(regs, + FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR); + } + + return ret; +} + +static void ftsdc010_set_ios(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + ftsdc010_clkset(mmc, mmc->clock); + + clrbits_le32(®s->bwr, FTSDC010_BWR_MODE_MASK); + switch (mmc->bus_width) { + case 4: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_4BIT); + break; + case 8: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_8BIT); + break; + default: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_1BIT); + break; + } +} + +static int ftsdc010_init(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t ts; + + if (readl(®s->status) & FTSDC010_STATUS_CARD_DETECT) + return NO_CARD_ERR; + + if (readl(®s->status) & FTSDC010_STATUS_WRITE_PROT) { + printf("ftsdc010: write protected\n"); + chip->wprot = 1; + } + + chip->fifo = (readl(®s->feature) & 0xff) << 2; + + /* 1. chip reset */ + writel(FTSDC010_CMD_SDC_RST, ®s->cmd); + for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) { + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) + continue; + break; + } + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) { + printf("ftsdc010: reset failed\n"); + return UNUSABLE_ERR; + } + + /* 2. enter low speed mode (400k card detection) */ + ftsdc010_clkset(mmc, 400000); + + /* 3. interrupt disabled */ + writel(0, ®s->int_mask); + + return 0; +} + +int ftsdc010_mmc_init(int devid) +{ + struct mmc *mmc; + struct ftsdc010_chip *chip; + struct ftsdc010_mmc __iomem *regs; +#ifdef CONFIG_FTSDC010_BASE_LIST + uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST; + + if (devid < 0 || devid >= ARRAY_SIZE(base_list)) + return -1; + regs = (void __iomem *)base_list[devid]; +#else + regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20)); +#endif + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) + return -ENOMEM; + memset(mmc, 0, sizeof(struct mmc)); + + chip = malloc(sizeof(struct ftsdc010_chip)); + if (!chip) { + free(mmc); + return -ENOMEM; + } + memset(chip, 0, sizeof(struct ftsdc010_chip)); + + chip->regs = regs; + mmc->priv = chip; + + sprintf(mmc->name, "ftsdc010"); + mmc->send_cmd = ftsdc010_request; + mmc->set_ios = ftsdc010_set_ios; + mmc->init = ftsdc010_init; + + mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz; + switch (readl(®s->bwr) & FTSDC010_BWR_CAPS_MASK) { + case FTSDC010_BWR_CAPS_4BIT: + mmc->host_caps |= MMC_MODE_4BIT; + break; + case FTSDC010_BWR_CAPS_8BIT: + mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT; + break; + default: + break; + } + +#ifdef CONFIG_SYS_CLK_FREQ + chip->sclk = CONFIG_SYS_CLK_FREQ; +#else + chip->sclk = clk_get_rate("SDC"); +#endif + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->f_max = chip->sclk / 2; + mmc->f_min = chip->sclk / 0x100; + mmc->block_dev.part_type = PART_TYPE_DOS; + + mmc_register(mmc); + + return 0; +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 2590f1b..0a2f535 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -524,48 +524,70 @@ static int sd_send_op_cond(struct mmc *mmc) return 0; } -static int mmc_send_op_cond(struct mmc *mmc) +/* We pass in the cmd since otherwise the init seems to fail */ +static int mmc_send_op_cond_iter(struct mmc *mmc, struct mmc_cmd *cmd, + int use_arg) { - int timeout = 10000; - struct mmc_cmd cmd; int err; + cmd->cmdidx = MMC_CMD_SEND_OP_COND; + cmd->resp_type = MMC_RSP_R3; + cmd->cmdarg = 0; + if (use_arg && !mmc_host_is_spi(mmc)) { + cmd->cmdarg = + (mmc->voltages & + (mmc->op_cond_response & OCR_VOLTAGE_MASK)) | + (mmc->op_cond_response & OCR_ACCESS_MODE); + + if (mmc->host_caps & MMC_MODE_HC) + cmd->cmdarg |= OCR_HCS; + } + err = mmc_send_cmd(mmc, cmd, NULL); + if (err) + return err; + mmc->op_cond_response = cmd->response[0]; + return 0; +} + +int mmc_send_op_cond(struct mmc *mmc) +{ + struct mmc_cmd cmd; + int err, i; + /* Some cards seem to need this */ mmc_go_idle(mmc); /* Asking to the card its capabilities */ - cmd.cmdidx = MMC_CMD_SEND_OP_COND; - cmd.resp_type = MMC_RSP_R3; - cmd.cmdarg = 0; - - err = mmc_send_cmd(mmc, &cmd, NULL); + mmc->op_cond_pending = 1; + for (i = 0; i < 2; i++) { + err = mmc_send_op_cond_iter(mmc, &cmd, i != 0); + if (err) + return err; - if (err) - return err; + /* exit if not busy (flag seems to be inverted) */ + if (mmc->op_cond_response & OCR_BUSY) + return 0; + } + return IN_PROGRESS; +} - udelay(1000); +int mmc_complete_op_cond(struct mmc *mmc) +{ + struct mmc_cmd cmd; + int timeout = 1000; + uint start; + int err; + mmc->op_cond_pending = 0; + start = get_timer(0); do { - cmd.cmdidx = MMC_CMD_SEND_OP_COND; - cmd.resp_type = MMC_RSP_R3; - cmd.cmdarg = (mmc_host_is_spi(mmc) ? 0 : - (mmc->voltages & - (cmd.response[0] & OCR_VOLTAGE_MASK)) | - (cmd.response[0] & OCR_ACCESS_MODE)); - - if (mmc->host_caps & MMC_MODE_HC) - cmd.cmdarg |= OCR_HCS; - - err = mmc_send_cmd(mmc, &cmd, NULL); - + err = mmc_send_op_cond_iter(mmc, &cmd, 1); if (err) return err; - - udelay(1000); - } while (!(cmd.response[0] & OCR_BUSY) && timeout--); - - if (timeout <= 0) - return UNUSABLE_ERR; + if (get_timer(start) > timeout) + return UNUSABLE_ERR; + udelay(100); + } while (!(mmc->op_cond_response & OCR_BUSY)); if (mmc_host_is_spi(mmc)) { /* read OCR for spi */ cmd.cmdidx = MMC_CMD_SPI_READ_OCR; @@ -1274,7 +1296,7 @@ block_dev_desc_t *mmc_get_dev(int dev) } #endif -int mmc_init(struct mmc *mmc) +int mmc_start_init(struct mmc *mmc) { int err; @@ -1314,17 +1336,48 @@ int mmc_init(struct mmc *mmc) if (err == TIMEOUT) { err = mmc_send_op_cond(mmc); - if (err) { + if (err && err != IN_PROGRESS) { printf("Card did not respond to voltage select!\n"); return UNUSABLE_ERR; } } - err = mmc_startup(mmc); + if (err == IN_PROGRESS) + mmc->init_in_progress = 1; + + return err; +} + +static int mmc_complete_init(struct mmc *mmc) +{ + int err = 0; + + if (mmc->op_cond_pending) + err = mmc_complete_op_cond(mmc); + + if (!err) + err = mmc_startup(mmc); if (err) mmc->has_init = 0; else mmc->has_init = 1; + mmc->init_in_progress = 0; + return err; +} + +int mmc_init(struct mmc *mmc) +{ + int err = IN_PROGRESS; + unsigned start = get_timer(0); + + if (mmc->has_init) + return 0; + if (!mmc->init_in_progress) + err = mmc_start_init(mmc); + + if (!err || err == IN_PROGRESS) + err = mmc_complete_init(mmc); + debug("%s: %d, time %lu\n", __func__, err, get_timer(start)); return err; } @@ -1362,6 +1415,25 @@ int get_mmc_num(void) return cur_dev_num; } +void mmc_set_preinit(struct mmc *mmc, int preinit) +{ + mmc->preinit = preinit; +} + +static void do_preinit(void) +{ + struct mmc *m; + struct list_head *entry; + + list_for_each(entry, &mmc_devices) { + m = list_entry(entry, struct mmc, link); + + if (m->preinit) + mmc_start_init(m); + } +} + + int mmc_initialize(bd_t *bis) { INIT_LIST_HEAD (&mmc_devices); @@ -1372,5 +1444,6 @@ int mmc_initialize(bd_t *bis) print_mmc_devices(','); + do_preinit(); return 0; } diff --git a/drivers/mmc/mv_sdhci.c b/drivers/mmc/mv_sdhci.c index 2fe34b6..63e1f90 100644 --- a/drivers/mmc/mv_sdhci.c +++ b/drivers/mmc/mv_sdhci.c @@ -51,6 +51,5 @@ int mv_sdh_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; else host->version = sdhci_readw(host, SDHCI_HOST_VERSION); - add_sdhci(host, max_clk, min_clk); - return 0; + return add_sdhci(host, max_clk, min_clk); } diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index dc49d37..e50ff92 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -94,6 +94,5 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->host_caps = MMC_MODE_HC; - add_sdhci(host, 52000000, 400000); - return 0; + return add_sdhci(host, 52000000, 400000); } diff --git a/drivers/mmc/spear_sdhci.c b/drivers/mmc/spear_sdhci.c new file mode 100644 index 0000000..23f1f4b --- /dev/null +++ b/drivers/mmc/spear_sdhci.c @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2012 + * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +int spear_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) +{ + struct sdhci_host *host = NULL; + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("sdhci host malloc fail!\n"); + return 1; + } + + host->name = "sdhci"; + host->ioaddr = (void *)regbase; + host->quirks = quirks; + + if (quirks & SDHCI_QUIRK_REG32_RW) + host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; + else + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + add_sdhci(host, max_clk, min_clk); + return 0; +} diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 22d8440..25f8752 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -38,6 +38,7 @@ #include <asm/processor.h> #include <asm/io.h> #include <asm/byteorder.h> +#include <asm/unaligned.h> #include <environment.h> #include <mtd/cfi_flash.h> #include <watchdog.h> @@ -183,16 +184,16 @@ u64 flash_read64(void *addr)__attribute__((weak, alias("__flash_read64"))); flash_info_t *flash_get_info(ulong base) { int i; - flash_info_t *info = NULL; + flash_info_t *info; for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - info = & flash_info[i]; + info = &flash_info[i]; if (info->size && info->start[0] <= base && base <= info->start[0] + info->size - 1) - break; + return info; } - return info; + return NULL; } #endif @@ -1640,9 +1641,10 @@ static void cfi_reverse_geometry(struct cfi_qry *qry) u32 tmp; for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) { - tmp = qry->erase_region_info[i]; - qry->erase_region_info[i] = qry->erase_region_info[j]; - qry->erase_region_info[j] = tmp; + tmp = get_unaligned(&(qry->erase_region_info[i])); + put_unaligned(get_unaligned(&(qry->erase_region_info[j])), + &(qry->erase_region_info[i])); + put_unaligned(tmp, &(qry->erase_region_info[j])); } } @@ -2073,8 +2075,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) info->start[0] = (ulong)map_physmem(base, info->portwidth, MAP_NOCACHE); if (flash_detect_cfi (info, &qry)) { - info->vendor = le16_to_cpu(qry.p_id); - info->ext_addr = le16_to_cpu(qry.p_adr); + info->vendor = le16_to_cpu(get_unaligned(&(qry.p_id))); + info->ext_addr = le16_to_cpu(get_unaligned(&(qry.p_adr))); num_erase_regions = qry.num_erase_regions; if (info->ext_addr) { @@ -2163,7 +2165,8 @@ ulong flash_get_size (phys_addr_t base, int banknum) break; } - tmp = le32_to_cpu(qry.erase_region_info[i]); + tmp = le32_to_cpu(get_unaligned( + &(qry.erase_region_info[i]))); debug("erase region %u: 0x%08lx\n", i, tmp); erase_region_count = (tmp & 0xffff) + 1; diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index bc558c4..dad30b5 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -94,7 +94,7 @@ static const struct spansion_spi_flash_params spansion_spi_flash_table[] = { .idcode2 = 0x4d01, .pages_per_sector = 256, .nr_sectors = 256, - .name = "S25FL129P_64K", + .name = "S25FL129P_64K/S25FL128S", }, { .idcode1 = 0x0219, diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index c63398e..0ffd59d 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -122,8 +122,6 @@ static int bfin_EMAC_send(struct eth_device *dev, void *packet, int length) { int i; int result = 0; - unsigned int *buf; - buf = (unsigned int *)packet; if (length <= 0) { printf("Ethernet: bad packet size: %d\n", length); diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index f191c79..9aaa828 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o COBJS-$(CONFIG_PPC_P5040) += p5040.o COBJS-$(CONFIG_PPC_T4240) += t4240.o +COBJS-$(CONFIG_PPC_T4160) += t4240.o COBJS-$(CONFIG_PPC_B4420) += b4860.o COBJS-$(CONFIG_PPC_B4860) += b4860.o endif diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c index 8cde7af..3b5defe 100644 --- a/drivers/net/fm/b4860.c +++ b/drivers/net/fm/b4860.c @@ -55,8 +55,10 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (is_device_disabled(port)) return PHY_INTERFACE_MODE_NONE; - if ((port == FM1_10GEC1 || port == FM1_10GEC2) - && (is_serdes_configured(XAUI_FM1))) + /*B4860 has two 10Gig Mac*/ + if ((port == FM1_10GEC1 || port == FM1_10GEC2) && + ((is_serdes_configured(XAUI_FM1_MAC9)) || + (is_serdes_configured(XAUI_FM1_MAC10)))) return PHY_INTERFACE_MODE_XGMII; /* Fix me need to handle RGMII here first */ diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 54b142f..9b139ee 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -568,6 +568,8 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; #ifdef CONFIG_SYS_FMAN_V3 + if (fm_eth->type == FM_ETH_10G_E) + num += 8; base = ®->memac[num].fm_memac; phyregs = ®->memac[num].fm_memac_mdio; #else diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index 228df33..ba581e9 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -152,4 +152,6 @@ struct fm_eth { #define MAX_RXBUF_LOG2 11 #define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2) +#define PORT_IS_ENABLED(port) fm_info[fm_port_to_index(port)].enabled + #endif /* __FM_H__ */ diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index ae389b8..5908c32 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -74,9 +74,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 2) + FM_TGEC_INFO_INITIALIZER(1, 2), +#endif #if (CONFIG_SYS_NUM_FM2_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(2, 1), #endif +#if (CONFIG_SYS_NUM_FM2_10GEC >= 2) + FM_TGEC_INFO_INITIALIZER(2, 2), +#endif }; int fm_standard_init(bd_t *bis) @@ -232,6 +238,26 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) return ; } +#ifdef CONFIG_SYS_FMAN_V3 + /* + * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when + * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the + * dual-role MAC is not disabled, ditto for other dual-role MACs. + */ + if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || + ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || + ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) +#if (CONFIG_SYS_NUM_FMAN == 2) + || + ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) || + ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) || + ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) || + ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10))) +#endif + ) + return; +#endif /* board code might have caused offset to change */ off = fdt_node_offset_by_compat_reg(blob, prop, paddr); @@ -249,10 +275,15 @@ void fdt_fixup_fman_ethernet(void *blob) { int i; +#ifdef CONFIG_SYS_FMAN_V3 + for (i = 0; i < ARRAY_SIZE(fm_info); i++) + ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac"); +#else for (i = 0; i < ARRAY_SIZE(fm_info); i++) { if (fm_info[i].type == FM_ETH_1G_E) ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac"); else ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac"); } +#endif } diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c index 48c530c..275395f 100644 --- a/drivers/net/fm/t4240.c +++ b/drivers/net/fm/t4240.c @@ -70,12 +70,18 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (is_device_disabled(port)) return PHY_INTERFACE_MODE_NONE; - if ((port == FM1_10GEC1 || port == FM1_10GEC2) - && (is_serdes_configured(XAUI_FM1))) + if ((port == FM1_10GEC1 || port == FM1_10GEC2) && + ((is_serdes_configured(XAUI_FM1_MAC9)) || + (is_serdes_configured(XAUI_FM1_MAC10)) || + (is_serdes_configured(XFI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC10)))) return PHY_INTERFACE_MODE_XGMII; - if ((port == FM2_10GEC1 || port == FM2_10GEC2) - && (is_serdes_configured(XAUI_FM2))) + if ((port == FM2_10GEC1 || port == FM2_10GEC2) && + ((is_serdes_configured(XAUI_FM2_MAC9)) || + (is_serdes_configured(XAUI_FM2_MAC10)) || + (is_serdes_configured(XFI_FM2_MAC9)) || + (is_serdes_configured(XFI_FM2_MAC10)))) return PHY_INTERFACE_MODE_XGMII; #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c index 78447b7..84ce736 100644 --- a/drivers/net/phy/teranetics.c +++ b/drivers/net/phy/teranetics.c @@ -34,9 +34,21 @@ int tn2020_config(struct phy_device *phydev) unsigned short restart_an = (MDIO_AN_CTRL1_RESTART | MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_XNP); + u8 phy_hwversion; - phy_write(phydev, 30, 93, 2); - phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an); + /* + * bit 15:12 of register 30.32 indicates PHY hardware + * version. It can be used to distinguish TN80xx from + * TN2020. TN2020 needs write 0x2 to 30.93, but TN80xx + * needs 0x1. + */ + phy_hwversion = (phy_read(phydev, 30, 32) >> 12) & 0xf; + if (phy_hwversion <= 3) { + phy_write(phydev, 30, 93, 2); + phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an); + } else { + phy_write(phydev, 30, 93, 1); + } } return 0; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 6c5cb99..c283d82 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -48,6 +48,19 @@ #define MIIM_VSC8601_SKEW_CTRL 0x1c #define PHY_EXT_PAGE_ACCESS 0x1f +#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10 +#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3 + +/* Vitesse VSC8574 control register */ +#define MIIM_VSC8574_MAC_SERDES_CON 0x10 +#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80 +#define MIIM_VSC8574_GENERAL18 0x12 +#define MIIM_VSC8574_GENERAL19 0x13 + +/* Vitesse VSC8574 gerenal purpose register 18 */ +#define MIIM_VSC8574_18G_SGMII 0x80f0 +#define MIIM_VSC8574_18G_QSGMII 0x80e0 +#define MIIM_VSC8574_18G_CMDSTAT 0x8000 /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) @@ -145,6 +158,49 @@ static int vsc8601_config(struct phy_device *phydev) return 0; } +static int vsc8574_config(struct phy_device *phydev) +{ + u32 val; + /* configure regiser 19G for MAC */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_GENERAL); + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19); + if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { + /* set bit 15:14 to '01' for QSGMII mode */ + val = (val & 0x3fff) | (1 << 14); + phy_write(phydev, MDIO_DEVAD_NONE, + MIIM_VSC8574_GENERAL19, val); + /* Enable 4 ports MAC QSGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, + MIIM_VSC8574_18G_QSGMII); + } else { + /* set bit 15:14 to '00' for SGMII mode */ + val = val & 0x3fff; + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val); + /* Enable 4 ports MAC SGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, + MIIM_VSC8574_18G_SGMII); + } + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); + /* When bit 15 is cleared the command has completed */ + while (val & MIIM_VSC8574_18G_CMDSTAT) + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); + + /* Enable Serdes Auto-negotiation */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_EXTENDED3); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON); + val = val | MIIM_VSC8574_MAC_SERDES_ANEG; + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val); + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -185,6 +241,16 @@ static struct phy_driver VSC8234_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8574_driver = { + .name = "Vitesse VSC8574", + .uid = 0x704a0, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8574_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver VSC8601_driver = { .name = "Vitesse VSC8601", .uid = 0x70420, @@ -244,6 +310,7 @@ int phy_vitesse_init(void) phy_register(&VSC8244_driver); phy_register(&VSC8211_driver); phy_register(&VSC8221_driver); + phy_register(&VSC8574_driver); phy_register(&VSC8662_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index a290073..f63a069 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h @@ -484,7 +484,7 @@ static void smc911x_reset(struct eth_device *dev) while (timeout-- && !(smc911x_reg_read(dev, PMT_CTRL) & PMT_CTRL_READY)) udelay(10); - if (!timeout) { + if (timeout < 0) { printf(DRIVERNAME ": timeout waiting for PM restore\n"); return; @@ -500,7 +500,7 @@ static void smc911x_reset(struct eth_device *dev) while (timeout-- && smc911x_reg_read(dev, E2P_CMD) & E2P_CMD_EPC_BUSY) udelay(10); - if (!timeout) { + if (timeout < 0) { printf(DRIVERNAME ": reset timeout\n"); return; } diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index fbc4e97..442b7ea 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -52,6 +52,7 @@ COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o +COBJS-$(CONFIG_BFIN_SERIAL) += serial_bfin.o ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 9f04643..daa8003 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -143,7 +143,6 @@ serial_initfunc(au1x00_serial_initialize); serial_initfunc(asc_serial_initialize); serial_initfunc(jz_serial_initialize); serial_initfunc(mpc5xx_serial_initialize); -serial_initfunc(mpc8220_serial_initialize); serial_initfunc(mpc8260_scc_serial_initialize); serial_initfunc(mpc8260_smc_serial_initialize); serial_initfunc(mpc85xx_serial_initialize); @@ -236,7 +235,6 @@ void serial_initialize(void) asc_serial_initialize(); jz_serial_initialize(); mpc5xx_serial_initialize(); - mpc8220_serial_initialize(); mpc8260_scc_serial_initialize(); mpc8260_smc_serial_initialize(); mpc85xx_serial_initialize(); diff --git a/arch/blackfin/cpu/serial.c b/drivers/serial/serial_bfin.c index 9847e9f..0443b84 100644 --- a/arch/blackfin/cpu/serial.c +++ b/drivers/serial/serial_bfin.c @@ -43,13 +43,12 @@ #include <serial.h> #include <linux/compiler.h> #include <asm/blackfin.h> +#include <asm/serial.h> DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_UART_CONSOLE -#include "serial.h" - #ifdef CONFIG_DEBUG_SERIAL static uart_lsr_t cached_lsr[256]; static uart_lsr_t cached_rbr[256]; @@ -195,7 +194,18 @@ static void uart_loop(uint32_t uart_base, int state) #endif -#ifdef CONFIG_SYS_BFIN_UART +static inline void __serial_set_baud(uint32_t uart_base, uint32_t baud) +{ +#ifdef CONFIG_DEBUG_EARLY_SERIAL + serial_early_set_baud(uart_base, baud); +#else + uint16_t divisor = (get_uart_clk() + (baud * 8)) / (baud * 16) + - ANOMALY_05000230; + + /* Program the divisor to get the baud rate we want */ + serial_set_divisor(uart_base, divisor); +#endif +} static void uart_puts(uint32_t uart_base, const char *s) { @@ -209,7 +219,7 @@ static int uart##n##_init(void) \ const unsigned short pins[] = { _P_UART(n, RX), _P_UART(n, TX), 0, }; \ peripheral_request_list(pins, "bfin-uart"); \ uart_init(MMR_UART(n)); \ - serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ uart_lsr_clear(MMR_UART(n)); \ return 0; \ } \ @@ -221,7 +231,7 @@ static int uart##n##_uninit(void) \ \ static void uart##n##_setbrg(void) \ { \ - serial_early_set_baud(MMR_UART(n), gd->baudrate); \ + __serial_set_baud(MMR_UART(n), gd->baudrate); \ } \ \ static int uart##n##_getc(void) \ @@ -305,65 +315,97 @@ void bfin_serial_initialize(void) #endif } -#else +#ifdef CONFIG_DEBUG_EARLY_SERIAL +inline void uart_early_putc(uint32_t uart_base, const char c) +{ + /* send a \r for compatibility */ + if (c == '\n') + uart_early_putc(uart_base, '\r'); -/* Symbol for our assembly to call. */ -void serial_set_baud(uint32_t baud) + /* wait for the hardware fifo to clear up */ + while (!(_lsr_read(pUART) & THRE)) + continue; + + /* queue the character for transmission */ + bfin_write(&pUART->thr, c); + SSYNC(); +} + +void uart_early_puts(const char *s) { - serial_early_set_baud(UART_BASE, baud); + while (*s) + uart_early_putc(UART_BASE, *s++); } -/* Symbol for common u-boot code to call. - * Setup the baudrate (brg: baudrate generator). - */ -void serial_setbrg(void) +/* Symbol for our assembly to call. */ +void _serial_early_set_baud(uint32_t baud) { - serial_set_baud(gd->baudrate); + serial_early_set_baud(UART_BASE, baud); } /* Symbol for our assembly to call. */ -void serial_initialize(void) +void _serial_early_init(void) { serial_early_init(UART_BASE); } +#endif -/* Symbol for common u-boot code to call. */ -int serial_init(void) +#elif defined(CONFIG_UART_MEM) + +char serial_logbuf[CONFIG_UART_MEM]; +char *serial_logbuf_head = serial_logbuf; + +int serial_mem_init(void) { - serial_initialize(); - serial_setbrg(); - uart_lsr_clear(UART_BASE); + serial_logbuf_head = serial_logbuf; return 0; } -int serial_tstc(void) +void serial_mem_setbrg(void) { - return uart_tstc(UART_BASE); } -int serial_getc(void) +int serial_mem_tstc(void) { - return uart_getc(UART_BASE); + return 0; } -void serial_putc(const char c) +int serial_mem_getc(void) { - uart_putc(UART_BASE, c); + return 0; } -void serial_puts(const char *s) +void serial_mem_putc(const char c) +{ + *serial_logbuf_head = c; + if (++serial_logbuf_head == serial_logbuf + CONFIG_UART_MEM) + serial_logbuf_head = serial_logbuf; +} + +void serial_mem_puts(const char *s) { while (*s) serial_putc(*s++); } -LOOP( -void serial_loop(int state) +struct serial_device bfin_serial_mem_device = { + .name = "bfin_uart_mem", + .start = serial_mem_init, + .setbrg = serial_mem_setbrg, + .getc = serial_mem_getc, + .tstc = serial_mem_tstc, + .putc = serial_mem_putc, + .puts = serial_mem_puts, +}; + + +__weak struct serial_device *default_serial_console(void) { - uart_loop(UART_BASE, state); + return &bfin_serial_mem_device; } -) -#endif - -#endif +void bfin_serial_initialize(void) +{ + serial_register(&bfin_serial_mem_device); +} +#endif /* CONFIG_UART_MEM */ diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index ab2e8b9..a9a4d92 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -13,7 +13,6 @@ #include <spi.h> #include <asm/blackfin.h> -#include <asm/dma.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <asm/mach-common/bits/spi.h> @@ -242,109 +241,15 @@ void spi_release_bus(struct spi_slave *slave) SSYNC(); } -#ifdef __ADSPBF54x__ -# define SPI_DMA_BASE DMA4_NEXT_DESC_PTR -#elif defined(__ADSPBF533__) || defined(__ADSPBF532__) || defined(__ADSPBF531__) || \ - defined(__ADSPBF538__) || defined(__ADSPBF539__) -# define SPI_DMA_BASE DMA5_NEXT_DESC_PTR -#elif defined(__ADSPBF561__) -# define SPI_DMA_BASE DMA2_4_NEXT_DESC_PTR -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) || \ - defined(__ADSPBF52x__) || defined(__ADSPBF51x__) -# define SPI_DMA_BASE DMA7_NEXT_DESC_PTR -# elif defined(__ADSPBF50x__) -# define SPI_DMA_BASE DMA6_NEXT_DESC_PTR -#else -# error "Please provide SPI DMA channel defines" -#endif -static volatile struct dma_register *dma = (void *)SPI_DMA_BASE; - #ifndef CONFIG_BFIN_SPI_IDLE_VAL # define CONFIG_BFIN_SPI_IDLE_VAL 0xff #endif -#ifdef CONFIG_BFIN_SPI_NO_DMA -# define SPI_DMA 0 -#else -# define SPI_DMA 1 -#endif - -static int spi_dma_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, - uint bytes) -{ - int ret = -1; - u16 ndsize, spi_config, dma_config; - struct dmasg dmasg[2]; - const u8 *buf; - - if (tx) { - debug("%s: doing half duplex TX\n", __func__); - buf = tx; - spi_config = TDBR_DMA; - dma_config = 0; - } else { - debug("%s: doing half duplex RX\n", __func__); - buf = rx; - spi_config = RDBR_DMA; - dma_config = WNR; - } - - dmasg[0].start_addr = (unsigned long)buf; - dmasg[0].x_modify = 1; - dma_config |= WDSIZE_8 | DMAEN; - if (bytes <= 65536) { - blackfin_dcache_flush_invalidate_range(buf, buf + bytes); - ndsize = NDSIZE_5; - dmasg[0].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN; - dmasg[0].x_count = bytes; - } else { - blackfin_dcache_flush_invalidate_range(buf, buf + 65536 - 1); - ndsize = NDSIZE_7; - dmasg[0].cfg = NDSIZE_5 | dma_config | FLOW_ARRAY | DMA2D; - dmasg[0].x_count = 0; /* 2^16 */ - dmasg[0].y_count = bytes >> 16; /* count / 2^16 */ - dmasg[0].y_modify = 1; - dmasg[1].start_addr = (unsigned long)(buf + (bytes & ~0xFFFF)); - dmasg[1].cfg = NDSIZE_0 | dma_config | FLOW_STOP | DI_EN; - dmasg[1].x_count = bytes & 0xFFFF; /* count % 2^16 */ - dmasg[1].x_modify = 1; - } - - dma->cfg = 0; - dma->irq_status = DMA_DONE | DMA_ERR; - dma->curr_desc_ptr = dmasg; - write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE)); - write_SPI_STAT(bss, -1); - SSYNC(); - - write_SPI_TDBR(bss, CONFIG_BFIN_SPI_IDLE_VAL); - dma->cfg = ndsize | FLOW_ARRAY | DMAEN; - write_SPI_CTL(bss, (bss->ctl & ~TDBR_CORE) | spi_config); - SSYNC(); - - /* - * We already invalidated the first 64k, - * now while we just wait invalidate the remaining part. - * Its not likely that the DMA is going to overtake - */ - if (bytes > 65536) - blackfin_dcache_flush_invalidate_range(buf + 65536, buf + bytes); - - while (!(dma->irq_status & DMA_DONE)) - if (ctrlc()) - goto done; - - dma->cfg = 0; - - ret = 0; - done: - write_SPI_CTL(bss, bss->ctl); - return ret; -} - static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, uint bytes) { + /* discard invalid data and clear RXS */ + read_SPI_RDBR(bss); /* todo: take advantage of hardware fifos */ while (bytes--) { u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL); @@ -393,11 +298,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (flags & SPI_XFER_BEGIN) spi_cs_activate(slave); - /* TX DMA doesn't work quite right */ - if (SPI_DMA && bytes > 6 && (!tx /*|| !rx*/)) - ret = spi_dma_xfer(bss, tx, rx, bytes); - else - ret = spi_pio_xfer(bss, tx, rx, bytes); + ret = spi_pio_xfer(bss, tx, rx, bytes); done: if (flags & SPI_XFER_END) diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index fd8f8a7..685702e 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -798,6 +798,7 @@ struct smsc95xx_dongle { static const struct smsc95xx_dongle smsc95xx_dongles[] = { { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */ + { 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */ { 0x0000, 0x0000 } /* END - Do not remove */ }; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index c816878..e0f3e4b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -122,6 +122,31 @@ static struct descriptor { #define ehci_is_TDI() (0) #endif +int __ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) +{ + return PORTSC_PSPD(reg); +} + +int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) + __attribute__((weak, alias("__ehci_get_port_speed"))); + +void __ehci_set_usbmode(int index) +{ + uint32_t tmp; + uint32_t *reg_ptr; + + reg_ptr = (uint32_t *)((u8 *)&ehcic[index].hcor->or_usbcmd + USBMODE); + tmp = ehci_readl(reg_ptr); + tmp |= USBMODE_CM_HC; +#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) + tmp |= USBMODE_BE; +#endif + ehci_writel(reg_ptr, tmp); +} + +void ehci_set_usbmode(int index) + __attribute__((weak, alias("__ehci_set_usbmode"))); + void __ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) { mdelay(50); @@ -149,8 +174,6 @@ static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) static int ehci_reset(int index) { uint32_t cmd; - uint32_t tmp; - uint32_t *reg_ptr; int ret = 0; cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd); @@ -163,15 +186,8 @@ static int ehci_reset(int index) goto out; } - if (ehci_is_TDI()) { - reg_ptr = (uint32_t *)((u8 *)ehcic[index].hcor + USBMODE); - tmp = ehci_readl(reg_ptr); - tmp |= USBMODE_CM_HC; -#if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) - tmp |= USBMODE_BE; -#endif - ehci_writel(reg_ptr, tmp); - } + if (ehci_is_TDI()) + ehci_set_usbmode(index); #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH cmd = ehci_readl(&ehcic[index].hcor->or_txfilltuning); @@ -587,16 +603,6 @@ fail: return -1; } -static inline int min3(int a, int b, int c) -{ - - if (b < a) - a = b; - if (c < a) - a = c; - return a; -} - int ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) @@ -607,15 +613,14 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, int len, srclen; uint32_t reg; uint32_t *status_reg; + int port = le16_to_cpu(req->index) & 0xff; struct ehci_ctrl *ctrl = dev->controller; - if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { - printf("The request port(%d) is not configured\n", - le16_to_cpu(req->index) - 1); + if (port > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { + printf("The request port(%d) is not configured\n", port - 1); return -1; } - status_reg = (uint32_t *)&ctrl->hcor->or_portsc[ - le16_to_cpu(req->index) - 1]; + status_reg = (uint32_t *)&ctrl->hcor->or_portsc[port - 1]; srclen = 0; debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", @@ -711,7 +716,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; if (ehci_is_TDI()) { - switch (PORTSC_PSPD(reg)) { + switch (ehci_get_port_speed(ctrl->hcor, reg)) { case PORTSC_PSPD_FS: break; case PORTSC_PSPD_LS: @@ -732,7 +737,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; if (reg & EHCI_PS_OCC) tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; - if (ctrl->portreset & (1 << le16_to_cpu(req->index))) + if (ctrl->portreset & (1 << port)) tmpbuf[2] |= USB_PORT_STAT_C_RESET; srcptr = tmpbuf; @@ -758,7 +763,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, EHCI_PS_IS_LOWSPEED(reg)) { /* Low speed device, give up ownership. */ debug("port %d low speed --> companion\n", - req->index - 1); + port - 1); reg |= EHCI_PS_PO; ehci_writel(status_reg, reg); break; @@ -784,13 +789,17 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, ret = handshake(status_reg, EHCI_PS_PR, 0, 2 * 1000); if (!ret) - ctrl->portreset |= - 1 << le16_to_cpu(req->index); + ctrl->portreset |= 1 << port; else printf("port(%d) reset error\n", - le16_to_cpu(req->index) - 1); + port - 1); } break; + case USB_PORT_FEAT_TEST: + reg &= ~(0xf << 16); + reg |= ((le16_to_cpu(req->index) >> 8) & 0xf) << 16; + ehci_writel(status_reg, reg); + break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); goto unknown; @@ -817,7 +826,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; break; case USB_PORT_FEAT_C_RESET: - ctrl->portreset &= ~(1 << le16_to_cpu(req->index)); + ctrl->portreset &= ~(1 << port); break; default: debug("unknown feature %x\n", le16_to_cpu(req->value)); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 086cd0f..2060a3e 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -60,7 +60,7 @@ int usb_cpu_init(void) writel(1 << ATMEL_ID_UHP, &pmc->pcer); #endif -#ifdef CONFIG_AT91SAM9261 +#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); #else writel(ATMEL_PMC_UHP, &pmc->scer); @@ -80,7 +80,7 @@ int usb_cpu_stop(void) writel(1 << ATMEL_ID_UHP, &pmc->pcdr); #endif -#ifdef CONFIG_AT91SAM9261 +#if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); #else writel(ATMEL_PMC_UHP, &pmc->scdr); diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 13e7c37..d57578d 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -33,6 +33,7 @@ endif COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o +COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/blackfin/cpu/watchdog.c b/drivers/watchdog/bfin_wdt.c index 1886bda..7a6756b 100644 --- a/arch/blackfin/cpu/watchdog.c +++ b/drivers/watchdog/bfin_wdt.c @@ -9,6 +9,7 @@ #include <common.h> #include <watchdog.h> #include <asm/blackfin.h> +#include <asm/mach-common/bits/watchdog.h> void hw_watchdog_reset(void) { @@ -17,7 +18,9 @@ void hw_watchdog_reset(void) void hw_watchdog_init(void) { - bfin_write_WDOG_CNT(5 * get_sclk()); /* 5 second timeout */ + bfin_write_WDOG_CTL(WDDIS); + SSYNC(); + bfin_write_WDOG_CNT(CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000 * get_sclk()); hw_watchdog_reset(); - bfin_write_WDOG_CTL(0x0); + bfin_write_WDOG_CTL(WDEN); } diff --git a/fs/ext4/dev.c b/fs/ext4/dev.c index 464a67d..81b7633 100644 --- a/fs/ext4/dev.c +++ b/fs/ext4/dev.c @@ -40,6 +40,7 @@ #include <config.h> #include <ext4fs.h> #include <ext_common.h> +#include "ext4_common.h" unsigned long part_offset; @@ -48,37 +49,41 @@ static disk_partition_t *part_info; void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info) { + assert(rbdd->blksz == (1 << rbdd->log2blksz)); ext4fs_block_dev_desc = rbdd; + get_fs()->dev_desc = rbdd; part_info = info; part_offset = info->start; - get_fs()->total_sect = (info->size * info->blksz) / SECTOR_SIZE; - get_fs()->dev_desc = rbdd; + get_fs()->total_sect = (info->size * info->blksz) >> + get_fs()->dev_desc->log2blksz; } int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf) { - ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, SECTOR_SIZE); unsigned block_len; + int log2blksz = ext4fs_block_dev_desc->log2blksz; + ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, (ext4fs_block_dev_desc ? + ext4fs_block_dev_desc->blksz : + 0)); + if (ext4fs_block_dev_desc == NULL) { + printf("** Invalid Block Device Descriptor (NULL)\n"); + return 0; + } /* Check partition boundaries */ - if ((sector < 0) - || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >= - part_info->size)) { + if ((sector < 0) || + ((sector + ((byte_offset + byte_len - 1) >> log2blksz)) + >= part_info->size)) { printf("%s read outside partition %d\n", __func__, sector); return 0; } /* Get the read to the beginning of a partition */ - sector += byte_offset >> SECTOR_BITS; - byte_offset &= SECTOR_SIZE - 1; + sector += byte_offset >> log2blksz; + byte_offset &= ext4fs_block_dev_desc->blksz - 1; debug(" <%d, %d, %d>\n", sector, byte_offset, byte_len); - if (ext4fs_block_dev_desc == NULL) { - printf("** Invalid Block Device Descriptor (NULL)\n"); - return 0; - } - if (byte_offset != 0) { /* read first part which isn't aligned with start of sector */ if (ext4fs_block_dev_desc-> @@ -89,9 +94,12 @@ int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf) return 0; } memcpy(buf, sec_buf + byte_offset, - min(SECTOR_SIZE - byte_offset, byte_len)); - buf += min(SECTOR_SIZE - byte_offset, byte_len); - byte_len -= min(SECTOR_SIZE - byte_offset, byte_len); + min(ext4fs_block_dev_desc->blksz + - byte_offset, byte_len)); + buf += min(ext4fs_block_dev_desc->blksz + - byte_offset, byte_len); + byte_len -= min(ext4fs_block_dev_desc->blksz + - byte_offset, byte_len); sector++; } @@ -99,12 +107,12 @@ int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf) return 1; /* read sector aligned part */ - block_len = byte_len & ~(SECTOR_SIZE - 1); + block_len = byte_len & ~(ext4fs_block_dev_desc->blksz - 1); if (block_len == 0) { - ALLOC_CACHE_ALIGN_BUFFER(u8, p, SECTOR_SIZE); + ALLOC_CACHE_ALIGN_BUFFER(u8, p, ext4fs_block_dev_desc->blksz); - block_len = SECTOR_SIZE; + block_len = ext4fs_block_dev_desc->blksz; ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev, part_info->start + sector, 1, (unsigned long *)p); @@ -114,16 +122,16 @@ int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf) if (ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev, part_info->start + sector, - block_len / SECTOR_SIZE, + block_len >> log2blksz, (unsigned long *) buf) != - block_len / SECTOR_SIZE) { + block_len >> log2blksz) { printf(" ** %s read error - block\n", __func__); return 0; } - block_len = byte_len & ~(SECTOR_SIZE - 1); + block_len = byte_len & ~(ext4fs_block_dev_desc->blksz - 1); buf += block_len; byte_len -= block_len; - sector += block_len / SECTOR_SIZE; + sector += block_len / ext4fs_block_dev_desc->blksz; if (byte_len != 0) { /* read rest of data which are not in whole sector */ @@ -138,3 +146,13 @@ int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf) } return 1; } + +int ext4_read_superblock(char *buffer) +{ + struct ext_filesystem *fs = get_fs(); + int sect = SUPERBLOCK_START >> fs->dev_desc->log2blksz; + int off = SUPERBLOCK_START % fs->dev_desc->blksz; + + return ext4fs_devread(sect, off, SUPERBLOCK_SIZE, + buffer); +} diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index f12b805..58880b4 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -71,18 +71,18 @@ void put_ext4(uint64_t off, void *buf, uint32_t size) uint64_t startblock; uint64_t remainder; unsigned char *temp_ptr = NULL; - ALLOC_CACHE_ALIGN_BUFFER(unsigned char, sec_buf, SECTOR_SIZE); struct ext_filesystem *fs = get_fs(); + int log2blksz = fs->dev_desc->log2blksz; + ALLOC_CACHE_ALIGN_BUFFER(unsigned char, sec_buf, fs->dev_desc->blksz); - startblock = off / (uint64_t)SECTOR_SIZE; + startblock = off >> log2blksz; startblock += part_offset; - remainder = off % (uint64_t)SECTOR_SIZE; - remainder &= SECTOR_SIZE - 1; + remainder = off & (uint64_t)(fs->dev_desc->blksz - 1); if (fs->dev_desc == NULL) return; - if ((startblock + (size / SECTOR_SIZE)) > + if ((startblock + (size >> log2blksz)) > (part_offset + fs->total_sect)) { printf("part_offset is %lu\n", part_offset); printf("total_sector is %llu\n", fs->total_sect); @@ -101,10 +101,10 @@ void put_ext4(uint64_t off, void *buf, uint32_t size) startblock, 1, sec_buf); } } else { - if (size / SECTOR_SIZE != 0) { + if (size >> log2blksz != 0) { fs->dev_desc->block_write(fs->dev_desc->dev, startblock, - size / SECTOR_SIZE, + size >> log2blksz, (unsigned long *)buf); } else { fs->dev_desc->block_read(fs->dev_desc->dev, @@ -1459,6 +1459,7 @@ static int ext4fs_blockgroup { long int blkno; unsigned int blkoff, desc_per_blk; + int log2blksz = get_fs()->dev_desc->log2blksz; desc_per_blk = EXT2_BLOCK_SIZE(data) / sizeof(struct ext2_block_group); @@ -1469,7 +1470,7 @@ static int ext4fs_blockgroup debug("ext4fs read %d group descriptor (blkno %ld blkoff %u)\n", group, blkno, blkoff); - return ext4fs_devread(blkno << LOG2_EXT2_BLOCK_SIZE(data), + return ext4fs_devread(blkno << (LOG2_BLOCK_SIZE(data) - log2blksz), blkoff, sizeof(struct ext2_block_group), (char *)blkgrp); } @@ -1479,6 +1480,7 @@ int ext4fs_read_inode(struct ext2_data *data, int ino, struct ext2_inode *inode) struct ext2_block_group blkgrp; struct ext2_sblock *sblock = &data->sblock; struct ext_filesystem *fs = get_fs(); + int log2blksz = get_fs()->dev_desc->log2blksz; int inodes_per_block, status; long int blkno; unsigned int blkoff; @@ -1495,7 +1497,8 @@ int ext4fs_read_inode(struct ext2_data *data, int ino, struct ext2_inode *inode) (ino % __le32_to_cpu(sblock->inodes_per_group)) / inodes_per_block; blkoff = (ino % inodes_per_block) * fs->inodesz; /* Read the inode. */ - status = ext4fs_devread(blkno << LOG2_EXT2_BLOCK_SIZE(data), blkoff, + status = ext4fs_devread(blkno << (LOG2_BLOCK_SIZE(data) - log2blksz), + blkoff, sizeof(struct ext2_inode), (char *)inode); if (status == 0) return 0; @@ -1515,7 +1518,9 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock) unsigned long long start; /* get the blocksize of the filesystem */ blksz = EXT2_BLOCK_SIZE(ext4fs_root); - log2_blksz = LOG2_EXT2_BLOCK_SIZE(ext4fs_root); + log2_blksz = LOG2_BLOCK_SIZE(ext4fs_root) + - get_fs()->dev_desc->log2blksz; + if (le32_to_cpu(inode->flags) & EXT4_EXTENTS_FL) { char *buf = zalloc(blksz); if (!buf) @@ -1523,11 +1528,11 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock) struct ext4_extent_header *ext_block; struct ext4_extent *extent; int i = -1; - ext_block = ext4fs_get_extent_block(ext4fs_root, buf, - (struct ext4_extent_header - *)inode->b. - blocks.dir_blocks, - fileblock, log2_blksz); + ext_block = + ext4fs_get_extent_block(ext4fs_root, buf, + (struct ext4_extent_header *) + inode->b.blocks.dir_blocks, + fileblock, log2_blksz); if (!ext_block) { printf("invalid extent block\n"); free(buf); @@ -1839,7 +1844,7 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock) blknr = __le32_to_cpu(ext4fs_indir3_block [rblock % perblock_child]); } - debug("ext4fs_read_block %ld\n", blknr); + debug("read_allocated_block %ld\n", blknr); return blknr; } @@ -2193,13 +2198,12 @@ int ext4fs_mount(unsigned part_length) struct ext2_data *data; int status; struct ext_filesystem *fs = get_fs(); - data = zalloc(sizeof(struct ext2_data)); + data = zalloc(SUPERBLOCK_SIZE); if (!data) return 0; /* Read the superblock. */ - status = ext4fs_devread(1 * 2, 0, sizeof(struct ext2_sblock), - (char *)&data->sblock); + status = ext4_read_superblock((char *)&data->sblock); if (status == 0) goto fail; diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h index 72cd020..6571df6 100644 --- a/fs/ext4/ext4_common.h +++ b/fs/ext4/ext4_common.h @@ -49,7 +49,7 @@ #define S_IFLNK 0120000 /* symbolic link */ #define BLOCK_NO_ONE 1 -#define SUPERBLOCK_SECTOR 2 +#define SUPERBLOCK_START (2 * 512) #define SUPERBLOCK_SIZE 1024 #define F_FILE 1 diff --git a/fs/ext4/ext4_journal.c b/fs/ext4/ext4_journal.c index ba4a7bb..81aa5fc 100644 --- a/fs/ext4/ext4_journal.c +++ b/fs/ext4/ext4_journal.c @@ -534,16 +534,14 @@ end: jsb->s_start = cpu_to_be32(1); jsb->s_sequence = cpu_to_be32(be32_to_cpu(jsb->s_sequence) + 1); /* get the superblock */ - ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, - (char *)fs->sb); + ext4_read_superblock((char *)fs->sb); fs->sb->feature_incompat |= EXT3_FEATURE_INCOMPAT_RECOVER; /* Update the super block */ put_ext4((uint64_t) (SUPERBLOCK_SIZE), (struct ext2_sblock *)fs->sb, (uint32_t) SUPERBLOCK_SIZE); - ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, - (char *)fs->sb); + ext4_read_superblock((char *)fs->sb); blknr = read_allocated_block(&inode_journal, EXT2_JOURNAL_SUPERBLOCK); diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c index c4e399c..0c1f62b 100644 --- a/fs/ext4/ext4_write.c +++ b/fs/ext4/ext4_write.c @@ -614,14 +614,13 @@ int ext4fs_init(void) /* populate fs */ fs->blksz = EXT2_BLOCK_SIZE(ext4fs_root); fs->inodesz = INODE_SIZE_FILESYSTEM(ext4fs_root); - fs->sect_perblk = fs->blksz / SECTOR_SIZE; + fs->sect_perblk = fs->blksz >> fs->dev_desc->log2blksz; /* get the superblock */ fs->sb = zalloc(SUPERBLOCK_SIZE); if (!fs->sb) return -ENOMEM; - if (!ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, - (char *)fs->sb)) + if (!ext4_read_superblock((char *)fs->sb)) goto fail; /* init journal */ @@ -722,7 +721,7 @@ void ext4fs_deinit(void) ext4fs_free_journal(); /* get the superblock */ - ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, (char *)fs->sb); + ext4_read_superblock((char *)fs->sb); fs->sb->feature_incompat &= ~EXT3_FEATURE_INCOMPAT_RECOVER; put_ext4((uint64_t)(SUPERBLOCK_SIZE), (struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE); @@ -766,9 +765,10 @@ static int ext4fs_write_file(struct ext2_inode *file_inode, { int i; int blockcnt; - int log2blocksize = LOG2_EXT2_BLOCK_SIZE(ext4fs_root); unsigned int filesize = __le32_to_cpu(file_inode->size); struct ext_filesystem *fs = get_fs(); + int log2blksz = fs->dev_desc->log2blksz; + int log2_fs_blocksize = LOG2_BLOCK_SIZE(ext4fs_root) - log2blksz; int previous_block_number = -1; int delayed_start = 0; int delayed_extent = 0; @@ -789,16 +789,16 @@ static int ext4fs_write_file(struct ext2_inode *file_inode, if (blknr < 0) return -1; - blknr = blknr << log2blocksize; + blknr = blknr << log2_fs_blocksize; if (blknr) { if (previous_block_number != -1) { if (delayed_next == blknr) { delayed_extent += blockend; - delayed_next += blockend >> SECTOR_BITS; + delayed_next += blockend >> log2blksz; } else { /* spill */ - put_ext4((uint64_t) (delayed_start * - SECTOR_SIZE), + put_ext4((uint64_t) + (delayed_start << log2blksz), delayed_buf, (uint32_t) delayed_extent); previous_block_number = blknr; @@ -806,7 +806,7 @@ static int ext4fs_write_file(struct ext2_inode *file_inode, delayed_extent = blockend; delayed_buf = buf; delayed_next = blknr + - (blockend >> SECTOR_BITS); + (blockend >> log2blksz); } } else { previous_block_number = blknr; @@ -814,13 +814,14 @@ static int ext4fs_write_file(struct ext2_inode *file_inode, delayed_extent = blockend; delayed_buf = buf; delayed_next = blknr + - (blockend >> SECTOR_BITS); + (blockend >> log2blksz); } } else { if (previous_block_number != -1) { /* spill */ - put_ext4((uint64_t) (delayed_start * - SECTOR_SIZE), delayed_buf, + put_ext4((uint64_t) (delayed_start << + log2blksz), + delayed_buf, (uint32_t) delayed_extent); previous_block_number = -1; } @@ -830,7 +831,7 @@ static int ext4fs_write_file(struct ext2_inode *file_inode, } if (previous_block_number != -1) { /* spill */ - put_ext4((uint64_t) (delayed_start * SECTOR_SIZE), + put_ext4((uint64_t) (delayed_start << log2blksz), delayed_buf, (uint32_t) delayed_extent); previous_block_number = -1; } @@ -921,7 +922,8 @@ int ext4fs_write(const char *fname, unsigned char *buffer, /* Allocate data blocks */ ext4fs_allocate_blocks(file_inode, blocks_remaining, &blks_reqd_for_file); - file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) / SECTOR_SIZE; + file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) >> + fs->dev_desc->log2blksz; temp_ptr = zalloc(fs->blksz); if (!temp_ptr) diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 4dddde2..1954afb 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -60,10 +60,12 @@ void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot) int ext4fs_read_file(struct ext2fs_node *node, int pos, unsigned int len, char *buf) { + struct ext_filesystem *fs = get_fs(); int i; int blockcnt; - int log2blocksize = LOG2_EXT2_BLOCK_SIZE(node->data); - int blocksize = 1 << (log2blocksize + DISK_SECTOR_BITS); + int log2blksz = fs->dev_desc->log2blksz; + int log2_fs_blocksize = LOG2_BLOCK_SIZE(node->data) - log2blksz; + int blocksize = (1 << (log2_fs_blocksize + log2blksz)); unsigned int filesize = __le32_to_cpu(node->inode.size); int previous_block_number = -1; int delayed_start = 0; @@ -88,7 +90,7 @@ int ext4fs_read_file(struct ext2fs_node *node, int pos, if (blknr < 0) return -1; - blknr = blknr << log2blocksize; + blknr = blknr << log2_fs_blocksize; /* Last block. */ if (i == blockcnt - 1) { @@ -110,7 +112,7 @@ int ext4fs_read_file(struct ext2fs_node *node, int pos, if (previous_block_number != -1) { if (delayed_next == blknr) { delayed_extent += blockend; - delayed_next += blockend >> SECTOR_BITS; + delayed_next += blockend >> log2blksz; } else { /* spill */ status = ext4fs_devread(delayed_start, delayed_skipfirst, @@ -124,7 +126,7 @@ int ext4fs_read_file(struct ext2fs_node *node, int pos, delayed_skipfirst = skipfirst; delayed_buf = buf; delayed_next = blknr + - (blockend >> SECTOR_BITS); + (blockend >> log2blksz); } } else { previous_block_number = blknr; @@ -133,7 +135,7 @@ int ext4fs_read_file(struct ext2fs_node *node, int pos, delayed_skipfirst = skipfirst; delayed_buf = buf; delayed_next = blknr + - (blockend >> SECTOR_BITS); + (blockend >> log2blksz); } } else { if (previous_block_number != -1) { diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index a9aa8ba..a4bfdac 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -61,14 +61,6 @@ typedef struct bd_info { #if defined(CONFIG_MPC83xx) unsigned long bi_immrbar; #endif -#if defined(CONFIG_MPC8220) - unsigned long bi_mbar_base; /* base of internal registers */ - unsigned long bi_inpfreq; /* Input Freq, In MHz */ - unsigned long bi_pcifreq; /* PCI Freq, in MHz */ - unsigned long bi_pevfreq; /* PEV Freq, in MHz */ - unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ - unsigned long bi_vcofreq; /* VCO Freq, in MHz */ -#endif unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ diff --git a/include/bootstage.h b/include/bootstage.h index 3b2216b..6dc0422 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -221,7 +221,7 @@ enum bootstage_id { */ ulong timer_get_boot_us(void); -#ifndef CONFIG_SPL_BUILD +#if !defined(CONFIG_SPL_BUILD) && !defined(USE_HOSTCC) /* * Board code can implement show_boot_progress() if needed. * @@ -233,10 +233,21 @@ void show_boot_progress(int val); #define show_boot_progress(val) do {} while (0) #endif -#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD) && \ + !defined(USE_HOSTCC) /* This is the full bootstage implementation */ /** + * Relocate existing bootstage records + * + * Call this after relocation has happened and after malloc has been initted. + * We need to copy any pointers in bootstage records that were added pre- + * relocation, since memory can be overritten later. + * @return Always returns 0, to indicate success + */ +int bootstage_relocate(void); + +/** * Add a new bootstage record * * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) @@ -257,6 +268,19 @@ ulong bootstage_error(enum bootstage_id id); ulong bootstage_mark_name(enum bootstage_id id, const char *name); /** + * Mark a time stamp in the given function and line number + * + * See BOOTSTAGE_MARKER() for a convenient macro. + * + * @param file Filename to record (NULL if none) + * @param func Function name to record + * @param linenum Line number to record + * @return recorded time stamp + */ +ulong bootstage_mark_code(const char *file, const char *func, + int linenum); + +/** * Mark the start of a bootstage activity. The end will be marked later with * bootstage_accum() and at that point we accumulate the time taken. Calling * this function turns the given id into a accumulator rather than and @@ -315,11 +339,22 @@ int bootstage_stash(void *base, int size); int bootstage_unstash(void *base, int size); #else +static inline ulong bootstage_add_record(enum bootstage_id id, + const char *name, int flags, ulong mark) +{ + return 0; +} + /* * This is a dummy implementation which just calls show_boot_progress(), * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined */ +static inline int bootstage_relocate(void) +{ + return 0; +} + static inline ulong bootstage_mark(enum bootstage_id id) { show_boot_progress(id); @@ -337,6 +372,22 @@ static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) return 0; } +static inline ulong bootstage_mark_code(const char *file, const char *func, + int linenum) +{ + return 0; +} + +static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) +{ + return 0; +} + +static inline uint32_t bootstage_accum(enum bootstage_id id) +{ + return 0; +} + static inline int bootstage_stash(void *base, int size) { return 0; /* Pretend to succeed */ @@ -348,4 +399,8 @@ static inline int bootstage_unstash(void *base, int size) } #endif /* CONFIG_BOOTSTAGE */ +/* Helper macro for adding a bootstage to a line of code */ +#define BOOTSTAGE_MARKER() \ + bootstage_mark_code(__FILE__, __func__, __LINE__) + #endif diff --git a/include/common.h b/include/common.h index 8a1f3e4..e682bd8 100644 --- a/include/common.h +++ b/include/common.h @@ -71,8 +71,6 @@ typedef volatile unsigned char vu_char; #include <mpc5xxx.h> #elif defined(CONFIG_MPC512X) #include <asm/immap_512x.h> -#elif defined(CONFIG_MPC8220) -#include <asm/immap_8220.h> #elif defined(CONFIG_8260) #if defined(CONFIG_MPC8247) \ || defined(CONFIG_MPC8248) \ @@ -199,18 +197,35 @@ typedef void (interrupt_handler_t)(void *); * General Purpose Utilities */ #define min(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x < __y) ? __x : __y; }) #define max(X, Y) \ - ({ typeof (X) __x = (X); \ - typeof (Y) __y = (Y); \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) #define MIN(x, y) min(x, y) #define MAX(x, y) max(x, y) +#define min3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x < __y ? (__x < __z ? __x : __z) : \ + (__y < __z ? __y : __z); }) + +#define max3(X, Y, Z) \ + ({ typeof(X) __x = (X); \ + typeof(Y) __y = (Y); \ + typeof(Z) __z = (Z); \ + __x > __y ? (__x > __z ? __x : __z) : \ + (__y > __z ? __y : __z); }) + +#define MIN3(x, y, z) min3(x, y, z) +#define MAX3(x, y, z) max3(x, y, z) + /* * Return the absolute value of a number. * @@ -323,6 +338,16 @@ int update_flash_size(int flash_size); */ void board_show_dram(ulong size); +/** + * arch_fixup_memory_node() - Write arch-specific memory information to fdt + * + * Defined in arch/$(ARCH)/lib/bootm.c + * + * @blob: FDT blob to write to + * @return 0 if ok, or -ve FDT_ERR_... on failure + */ +int arch_fixup_memory_node(void *blob); + /* common/flash.c */ void flash_perror (int); @@ -556,7 +581,6 @@ void trap_init (ulong); defined (CONFIG_74x) || \ defined (CONFIG_75x) || \ defined (CONFIG_74xx) || \ - defined (CONFIG_MPC8220) || \ defined (CONFIG_MPC85xx) || \ defined (CONFIG_MPC86xx) || \ defined (CONFIG_MPC83xx) @@ -648,9 +672,6 @@ int prt_8260_clks (void); #elif defined(CONFIG_MPC5xxx) int prt_mpc5xxx_clks (void); #endif -#if defined(CONFIG_MPC8220) -int prt_mpc8220_clks (void); -#endif #ifdef CONFIG_4xx ulong get_OPB_freq (void); ulong get_PCI_freq (void); diff --git a/include/configs/Alaska8220.h b/include/configs/Alaska8220.h deleted file mode 100644 index 39c29ec..0000000 --- a/include/configs/Alaska8220.h +++ /dev/null @@ -1,334 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_ALASKA8220 1 /* ... on Alaska board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME Alaska -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* - * JFFS2 partitions - */ - -/* No command line, one static partition */ -/* -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x00400000 -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 -*/ - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=alaska-0" -#define MTDPARTS_DEFAULT "mtdparts=alaska-0:4m(user)" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index b09119a..1c9d08e 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -36,7 +36,6 @@ /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -528,6 +527,15 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SF_DEFAULT_MODE 0 /* + * MAPLE + */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xFA0000000ull +#else +#define CONFIG_SYS_MAPLE_MEM_PHYS 0xA0000000 +#endif + +/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ @@ -623,7 +631,11 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_FMAN_ENET #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10 #define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11 -#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 + +/*B4860 QDS AMC2PEX-2S default PHY_ADDR */ +#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/ +#define CONFIG_SYS_FM1_10GEC2_PHY_ADDR 0x6 /*SLOT 2*/ + #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 76b3ca6..6dd5c0d 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,7 +25,6 @@ */ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_PPC_T4240 #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/Yukon8220.h b/include/configs/Yukon8220.h deleted file mode 100644 index 5f925b3..0000000 --- a/include/configs/Yukon8220.h +++ /dev/null @@ -1,326 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_YUKON8220 1 /* ... on Yukon board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BAT_RW 1 /* Use common BAT rw code */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 30Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 30000000/* ... running at 30MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 16 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ - -/* Define this for PSC console -#define CONFIG_PSC_CONSOLE 1 -*/ - -#define CONFIG_EXTUART_CONSOLE 1 - -#ifdef CONFIG_EXTUART_CONSOLE -# define CONFIG_CONS_INDEX 1 -# define CONFIG_SYS_NS16550_SERIAL -# define CONFIG_SYS_NS16550 -# define CONFIG_SYS_NS16550_REG_SIZE 1 -# define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CPLD_BASE + 0x1008) -# define CONFIG_SYS_NS16550_CLK 18432000 -#endif - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -#define CONFIG_MII - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOTARGS "root=/dev/ram rw" -#define CONFIG_ETHADDR 00:e0:0c:bc:e0:60 -#define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:e0:0c:bc:e0:61 -#define CONFIG_IPADDR 192.162.1.2 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SERVERIP 192.162.1.1 -#define CONFIG_GATEWAYIP 192.162.1.1 -#define CONFIG_HOSTNAME yukon -#define CONFIG_OVERWRITE_ETHADDR_ONCE - - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1011000xb */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 70 -/* -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 256 -*/ - -/* If CONFIG_SYS_AMD_BOOT is defined, the the system will boot from AMD. - else undefined it will boot from Intel Strata flash */ -#define CONFIG_SYS_AMD_BOOT 1 - -/* - * Flexbus Chipselect configuration - */ -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_CS0_BASE 0xfff0 -#define CONFIG_SYS_CS0_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS0_CTRL 0x003f0d40 - -#define CONFIG_SYS_CS1_BASE 0xfe00 -#define CONFIG_SYS_CS1_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS1_CTRL 0x003f1540 -#else -#define CONFIG_SYS_CS0_BASE 0xff00 -#define CONFIG_SYS_CS0_MASK 0x01000000 /* 16 MB */ -#define CONFIG_SYS_CS0_CTRL 0x003f1540 - -#define CONFIG_SYS_CS1_BASE 0xfe08 -#define CONFIG_SYS_CS1_MASK 0x00080000 /* 512 KB */ -#define CONFIG_SYS_CS1_CTRL 0x003f0d40 -#endif - -#define CONFIG_SYS_CS2_BASE 0xf100 -#define CONFIG_SYS_CS2_MASK 0x00040000 -#define CONFIG_SYS_CS2_CTRL 0x003f1140 - -#define CONFIG_SYS_CS3_BASE 0xf200 -#define CONFIG_SYS_CS3_MASK 0x00040000 -#define CONFIG_SYS_CS3_CTRL 0x003f1100 - - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_CS1_BASE << 16) - -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH1_BASE + 0xf00000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_AMD_BASE -#else -#define CONFIG_SYS_INTEL_BASE CONFIG_SYS_FLASH0_BASE + 0xf00000 -#define CONFIG_SYS_AMD_BASE CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_INTEL_BASE -#endif - -#define CONFIG_SYS_CPLD_BASE (CONFIG_SYS_CS2_BASE << 16) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_CS3_BASE << 16) - - -#define CONFIG_SYS_MAX_FLASH_BANKS 4 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define PHYS_AMD_SECT_SIZE 0x00010000 /* 64 KB sectors (x2) */ -#define PHYS_INTEL_SECT_SIZE 0x00020000 /* 128 KB sectors (x2) */ - -#define CONFIG_SYS_FLASH_CHECKSUM -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined (CONFIG_SYS_AMD_BOOT) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_INTEL_SECT_SIZE -#else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH0_BASE + CONFIG_SYS_CS0_MASK - PHYS_INTEL_SECT_SIZE) -#define CONFIG_ENV_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV_SECT_SIZE PHYS_INTEL_SECT_SIZE -#define CONFIG_ENV1_ADDR (CONFIG_SYS_FLASH1_BASE + CONFIG_SYS_CS1_MASK - PHYS_AMD_SECT_SIZE) -#define CONFIG_ENV1_SIZE PHYS_AMD_SECT_SIZE -#define CONFIG_ENV1_SECT_SIZE PHYS_AMD_SECT_SIZE -#endif - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -#ifndef CONFIG_SYS_JFFS2_FIRST_SECTOR -#define CONFIG_SYS_JFFS2_FIRST_SECTOR 0 -#endif -#ifndef CONFIG_SYS_JFFS2_FIRST_BANK -#define CONFIG_SYS_JFFS2_FIRST_BANK 0 -#endif -#ifndef CONFIG_SYS_JFFS2_NUM_BANKS -#define CONFIG_SYS_JFFS2_NUM_BANKS 1 -#endif -#define CONFIG_SYS_JFFS2_LAST_BANK (CONFIG_SYS_JFFS2_FIRST_BANK + CONFIG_SYS_JFFS2_NUM_BANKS - 1) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 2 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x40 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */ - -/* SDRAM drive strength register */ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x18 - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#endif /* __CONFIG_H */ diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 7b51b53..db1b613 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -149,10 +149,15 @@ #define CONFIG_MUSB_TIMEOUT 100000 #endif +/* Don't waste time transferring a logo over the UART */ +#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) +/*# define CONFIG_VIDEO*/ +#endif /* * Video Settings */ +#ifdef CONFIG_VIDEO #ifdef CONFIG_BF527_EZKIT_REV_2_1 # define CONFIG_LQ035Q1_SPI_BUS 0 # define CONFIG_LQ035Q1_SPI_CS 7 @@ -166,7 +171,7 @@ #else # define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h> #endif - +#endif /* CONFIG_VIDEO */ /* * Misc Settings @@ -175,11 +180,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -/* Don't waste time transferring a logo over the UART */ -#if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -#endif - /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index 05029d4..25cebf8 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -52,7 +52,7 @@ #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (384 * 1024) @@ -135,15 +135,17 @@ /* * SPI_MMC Settings */ +#define CONFIG_MMC_SPI +#ifdef CONFIG_MMC_SPI #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_SPI - +#endif /* * NAND Settings */ /* #define CONFIG_NAND_PLAT */ +#ifdef CONFIG_NAND_PLAT #define CONFIG_SYS_NAND_BASE 0x20212000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 @@ -158,7 +160,7 @@ #define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd) #define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd) #define NAND_PLAT_GPIO_DEV_READY GPIO_PF3 - +#endif /* CONFIG_NAND_PLAT */ /* * CF-CARD IDE-HDD Support diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index e6b05db..da5f029 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -120,18 +120,16 @@ #define CONFIG_ENV_SECT_SIZE 0x8000 #endif - /* * NAND Settings */ -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif +#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 +#define CONFIG_BFIN_NFC_BOOTROM_ECC #define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - +#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#endif /* * I2C Settings @@ -184,13 +182,12 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#ifndef __ADSPBF542__ -/* Don't waste time transferring a logo over the UART */ -# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) -# define CONFIG_VIDEO -# define EASYLOGO_HEADER <asm/bfin_logo_230x230_gzip.h> -# endif -# define CONFIG_DEB_DMA_URGENT +#define CONFIG_ADI_GPIO2 + +#undef CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h > +#define CONFIG_DEB_DMA_URGENT #endif /* Define if want to do post memory test */ diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 1a9d27e..6ee1e4c 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -98,6 +98,11 @@ */ #define CONFIG_UART_CONSOLE 0 +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 02149fa..1a43e1b 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -144,10 +144,13 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_CMD_MEMORY +#define CONFIG_CMD_SOFTSWITCH #define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) #define CONFIG_BFIN_SOFT_SWITCH +#define CONFIG_ADI_GPIO2 + #if 0 #define CONFIG_UART_MEM 1024 #undef CONFIG_UART_CONSOLE @@ -155,6 +158,13 @@ #undef CONFIG_UART_CONSOLE_IS_JTAG #endif +#define CONFIG_BOARD_SIZE_LIMIT $$((512 * 1024)) + +/* + * Run core 1 from L1 SRAM start address when init uboot on core 0 + */ +/* #define CONFIG_CORE1_RUN 1 */ + /* * Pull in common ADI header for remaining command/environment setup */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index d3ae3a7..e1a6fe3 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -111,8 +111,8 @@ #ifndef CONFIG_BAUDRATE # define CONFIG_BAUDRATE 57600 #endif -#ifndef CONFIG_DEBUG_EARLY_SERIAL -# define CONFIG_SYS_BFIN_UART +#ifdef CONFIG_UART_CONSOLE +# define CONFIG_BFIN_SERIAL #endif /* @@ -317,5 +317,13 @@ #define CONFIG_BFIN_SPI_GPIO_CS /* Only matters if BFIN_SPI is enabled */ #define CONFIG_LZMA #define CONFIG_MONITOR_IS_IN_RAM - +#ifdef CONFIG_HW_WATCHDOG +# define CONFIG_BFIN_WATCHDOG +# ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +# define CONFIG_WATCHDOG_TIMEOUT_MSECS 5000 +# endif +#endif +#ifndef CONFIG_ADI_GPIO2 +# define CONFIG_ADI_GPIO1 +#endif #endif diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 5bacc77..be04a75 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -38,7 +38,6 @@ #define CONFIG_SHOW_BOOT_PROGRESS #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_VSNPRINTF -#define CONFIG_INTEL_CORE_ARCH /* Sandy bridge and ivy bridge chipsets. */ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT @@ -49,6 +48,19 @@ #define CONFIG_OF_SEPARATE #define CONFIG_DEFAULT_DEVICE_TREE link +#define CONFIG_BOOTSTAGE +#define CONFIG_BOOTSTAGE_REPORT +#define CONFIG_BOOTSTAGE_FDT +#define CONFIG_CMD_BOOTSTAGE +/* Place to stash bootstage data from first-stage U-Boot */ +#define CONFIG_BOOTSTAGE_STASH 0x0110f000 +#define CONFIG_BOOTSTAGE_STASH_SIZE 0x7fc +#define CONFIG_BOOTSTAGE_USER_COUNT 60 + +#define CONFIG_LZO +#undef CONFIG_ZLIB +#undef CONFIG_GZIP + /*----------------------------------------------------------------------- * Watchdog Configuration */ @@ -218,7 +230,6 @@ #define CONFIG_SYS_MEMTEST_END 0x01000000 #define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_X86_ISR_TIMER /*----------------------------------------------------------------------- * SDRAM Configuration @@ -235,8 +246,9 @@ * CPU Features */ -#define CONFIG_SYS_GENERIC_TIMER +#define CONFIG_SYS_X86_TSC_TIMER #define CONFIG_SYS_PCAT_INTERRUPTS +#define CONFIG_SYS_PCAT_TIMER #define CONFIG_SYS_NUM_IRQS 16 /*----------------------------------------------------------------------- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 5cc9b5a..2e2d439 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -38,6 +38,8 @@ #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p4080ds.cfg #elif defined(CONFIG_P5020DS) #define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5020ds.cfg +#elif defined(CONFIG_P5040DS) +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/corenet_ds/rcw_p5040ds.cfg #endif #endif diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 0c4e719..17f53ba 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -104,7 +104,7 @@ /* gpio */ #ifdef XILINX_GPIO_BASEADDR -# define CONFIG_SYS_GPIO_0 1 +# define CONFIG_XILINX_GPIO # define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR #endif @@ -312,6 +312,7 @@ #define CONFIG_CMD_IRQ #define CONFIG_CMD_MFSL #define CONFIG_CMD_ECHO +#define CONFIG_CMD_GPIO #if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE) # define CONFIG_CMD_CACHE diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h deleted file mode 100644 index f67898e..0000000 --- a/include/configs/sorcery.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * (C) Copyright 2004 - * TsiChung Liew, Freescale Software Engineering, Tsi-Chung.Liew@freescale. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC8220 1 -#define CONFIG_SORCERY 1 /* Sorcery board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* Input clock running at 60Mhz, read Hid1 for the CPU multiplier to - determine the CPU speed. */ -#define CONFIG_SYS_MPC8220_CLKIN 60000000 /* ... running at 60MHz */ -#define CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER 8 /* VCO multiplier can't be read from any register */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */ - -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* PCI */ -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 - -#define CONFIG_PCI_MEM_BUS 0x80000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x71000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_PCI_CFG_BUS 0x70000000 -#define CONFIG_PCI_CFG_PHYS CONFIG_PCI_CFG_BUS -#define CONFIG_PCI_CFG_SIZE 0x01000000 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_ELF -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - - -/* - * Default Environment - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_HOSTNAME sorcery - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask" \ - ":$hostname:$netdev:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $kernel_addr\0" \ - "flash_self=run ramargs addip;" \ - "bootm $kernel_addr $ramdisk_addr\0" \ - "net_nfs=tftp 200000 $bootfile;run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ - "bootfile=/tftpboot/sorcery/uImage\0" \ - "kernel_addr=FFE00000\0" \ - "ramdisk_addr=FFB00000\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_EEPRO100 - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_MODULE 1 -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Flexbus Chipselect configuration - * Beware: Some CS# seem to be mandatory (if these CS# are not set, - * board can hang-up in unpredictable place). - * Sorcery_Memory_Map v0.3 is possibly wrong with CPLD CS# - */ - -/* Flash */ -#define CONFIG_SYS_CS0_BASE 0xf800 -#define CONFIG_SYS_CS0_MASK 0x08000000 /* 128 MB (two chips) */ -#define CONFIG_SYS_CS0_CTRL 0x001019c0 - -/* NVM */ -#define CONFIG_SYS_CS1_BASE 0xf7e8 -#define CONFIG_SYS_CS1_MASK 0x00040000 /* 256K */ -#define CONFIG_SYS_CS1_CTRL 0x00101940 /* 8bit port size */ - -/* Atlas2 + Gemini */ -#define CONFIG_SYS_CS2_BASE 0xf7e7 -#define CONFIG_SYS_CS2_MASK 0x00010000 /* 64K*/ -#define CONFIG_SYS_CS2_CTRL 0x001011c0 /* 16bit port size */ - -/* CAN Controller */ -#define CONFIG_SYS_CS3_BASE 0xf7e6 -#define CONFIG_SYS_CS3_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS3_CTRL 0x00102140 /* 8Bit port size */ - -/* Foreign interface */ -#define CONFIG_SYS_CS4_BASE 0xf7e5 -#define CONFIG_SYS_CS4_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS4_CTRL 0x00101dc0 /* 16bit port size */ - -/* CPLD */ -#define CONFIG_SYS_CS5_BASE 0xf7e4 -#define CONFIG_SYS_CS5_MASK 0x00010000 /* 64K */ -#define CONFIG_SYS_CS5_CTRL 0x001000c0 /* 16bit port size */ - -#define CONFIG_SYS_FLASH0_BASE (CONFIG_SYS_CS0_BASE << 16) -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_FLASH0_BASE) - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE+0x04000000 } /* two banks */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000000 - 0x40000) -#define CONFIG_ENV_SIZE 0x4000 /* 16K */ -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + 0x20000) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -#if defined CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#undef CONFIG_ENV_IS_IN_EEPROM -#elif defined CONFIG_ENV_IS_IN_EEPROM -#undef CONFIG_ENV_IS_IN_NVRAM -#undef CONFIG_ENV_IS_IN_FLASH -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_SRAM_SIZE 0x8000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MBAR + 0x20000) -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* SDRAM configuration (for SPD) */ -#define CONFIG_SYS_SDRAM_TOTAL_BANKS 1 -#define CONFIG_SYS_SDRAM_SPD_I2C_ADDR 0x50 /* 7bit */ -#define CONFIG_SYS_SDRAM_SPD_SIZE 0x100 -#define CONFIG_SYS_SDRAM_CAS_LATENCY 5 /* (CL=2.5)x2 */ - -/* SDRAM drive strength register (for SSTL_2 class II)*/ -#define CONFIG_SYS_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_HIGH << SDRAMDS_SBE_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBA_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBS_SHIFT) | \ - (DRIVE_STRENGTH_HIGH << SDRAMDS_SBD_SHIFT)) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC8220_FEC 1 -#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */ -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8220 CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT 0 -#define CONFIG_SYS_HID0_FINAL 0 - -/* -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 2c665b8..fa1dcc3 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -29,13 +29,14 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg #endif #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ #define CONFIG_BOOKE -#define CONFIG_E6500 #define CONFIG_E500 /* BOOKE e500 family */ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ @@ -444,11 +445,19 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_MUX_CH_VSC3316_FS 0xc #define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR #define VSC3316_FSM_TX_ADDR 0x70 #define VSC3316_FSM_RX_ADDR 0x71 @@ -504,7 +513,7 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -641,15 +650,10 @@ unsigned long get_board_ddr_clk(void); #define SGMII_CARD_PORT2_PHY_ADDR 0x1D #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ -#define XFI_CARD_PORT2_PHY_ADDR 0x2 -#define XFI_CARD_PORT3_PHY_ADDR 0x3 -#define XFI_CARD_PORT4_PHY_ADDR 0x4 -#define QSGMII_CARD_PHY_ADDR 0x5 -#define FM1_10GEC1_PHY_ADDR 0x6 -#define FM1_10GEC2_PHY_ADDR 0x7 -#define FM2_10GEC1_PHY_ADDR 0x8 -#define FM2_10GEC2_PHY_ADDR 0x9 +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 #endif #ifdef CONFIG_PCI @@ -783,8 +787,21 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE utmi +/* + * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to + * cacheline interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ diff --git a/include/ext4fs.h b/include/ext4fs.h index 025a2e8..379f7eb 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -141,4 +141,5 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock); int ext4fs_probe(block_dev_desc_t *fs_dev_desc, disk_partition_t *fs_partition); int ext4_read_file(const char *filename, void *buf, int offset, int len); +int ext4_read_superblock(char *buffer); #endif diff --git a/include/ext_common.h b/include/ext_common.h index 86373a6..78a7808 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -34,7 +34,6 @@ #define __EXT_COMMON__ #include <command.h> #define SECTOR_SIZE 0x200 -#define SECTOR_BITS 9 /* Magic value used to identify an ext2 filesystem. */ #define EXT2_MAGIC 0xEF53 @@ -58,18 +57,13 @@ #define FILETYPE_INO_SYMLINK 0120000 #define EXT2_ROOT_INO 2 /* Root inode */ -/* Bits used as offset in sector */ -#define DISK_SECTOR_BITS 9 /* The size of an ext2 block in bytes. */ #define EXT2_BLOCK_SIZE(data) (1 << LOG2_BLOCK_SIZE(data)) -/* Log2 size of ext2 block in 512 blocks. */ -#define LOG2_EXT2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 1) - /* Log2 size of ext2 block in bytes. */ -#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ - (data->sblock.log2_block_size) + 10) +#define LOG2_BLOCK_SIZE(data) (__le32_to_cpu \ + (data->sblock.log2_block_size) \ + + EXT2_MIN_BLOCK_LOG_SIZE) #define INODE_SIZE_FILESYSTEM(data) (__le32_to_cpu \ (data->sblock.inode_size)) diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h index c34dde7..8284f53 100644 --- a/include/faraday/ftsdc010.h +++ b/include/faraday/ftsdc010.h @@ -23,6 +23,7 @@ #define __FTSDC010_H #ifndef __ASSEMBLY__ + /* sd controller register */ struct ftsdc010_mmc { unsigned int cmd; /* 0x00 - command reg */ @@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */ #define FTSDC010_STATUS_DATA0_STATUS (1 << 17) #endif /* CONFIG_FTSDC010_SDIO */ +#define FTSDC010_STATUS_RSP_ERROR \ + (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT) +#define FTSDC010_STATUS_RSP_MASK \ + (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK) +#define FTSDC010_STATUS_DATA_ERROR \ + (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT) +#define FTSDC010_STATUS_DATA_MASK \ + (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \ + | FTSDC010_STATUS_DATA_END) /* 0x2c - clear register */ #define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0) @@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0) #define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */ #define FTSDC010_CCR_CLK_DIS (1 << 8) +#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */ /* card type */ #define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE #define FTSDC010_CARD_TYPE_MMC 0x0 /* 0x3c - bus width register */ -#define FTSDC010_BWR_SINGLE_BUS (1 << 0) -#define FTSDC010_BWR_WIDE_8_BUS (1 << 1) -#define FTSDC010_BWR_WIDE_4_BUS (1 << 2) -#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3) -#define FTSDC010_BWR_CARD_DETECT (1 << 5) - -#define FTSDC010_BWR_1_BUS_SUPPORT 0x0 -#define FTSDC010_BWR_4_BUS_SUPPORT 0x1 -#define FTSDC010_BWR_8_BUS_SUPPORT 0x2 +#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */ +#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */ +#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */ +#define FTSDC010_BWR_MODE_MASK (7 << 0) +#define FTSDC010_BWR_MODE_SHIFT (0) +#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */ +#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */ +#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */ +#define FTSDC010_BWR_CAPS_MASK (3 << 3) +#define FTSDC010_BWR_CAPS_SHIFT (3) +#define FTSDC010_BWR_CARD_DETECT (1 << 5) /* 0x44 or 0x9c - feature register */ #define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff) diff --git a/include/fdt.h b/include/fdt.h index f9612ed..526aedb 100644 --- a/include/fdt.h +++ b/include/fdt.h @@ -1,5 +1,56 @@ #ifndef _FDT_H #define _FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ #ifndef __ASSEMBLY__ @@ -57,6 +108,4 @@ struct fdt_property { #define FDT_V16_SIZE FDT_V3_SIZE #define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) -/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ -#define FDT_RAMDISK_OVERHEAD 0x80 #endif /* _FDT_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 2cccc35..8f07a67 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -78,11 +78,9 @@ static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); #endif -#ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); void ft_pci_setup(void *blob, bd_t *bd); -#endif void set_working_fdt_addr(void *addr); int fdt_resize(void *blob); diff --git a/include/fm_eth.h b/include/fm_eth.h index 495765b..8fcf172 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -88,7 +88,7 @@ enum fm_eth_type { #define FM_TGEC_INFO_INITIALIZER(idx, n) \ { \ - FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \ .index = idx, \ .num = n - 1, \ .type = FM_ETH_10G_E, \ @@ -96,7 +96,7 @@ enum fm_eth_type { .rx_port_id = RX_PORT_10G_BASE + n - 1, \ .tx_port_id = TX_PORT_10G_BASE + n - 1, \ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ - offsetof(struct ccsr_fman, memac[n-1]),\ + offsetof(struct ccsr_fman, memac[n-1+8]),\ } #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ diff --git a/include/hash.h b/include/hash.h index 2dbbd9b..c402067 100644 --- a/include/hash.h +++ b/include/hash.h @@ -71,4 +71,26 @@ enum { int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); +/** + * hash_block() - Hash a block according to the requested algorithm + * + * The caller probably knows the hash length for the chosen algorithm, but + * in order to provide a general interface, and output_size parameter is + * provided. + * + * @algo_name: Hash algorithm to use + * @data: Data to hash + * @len: Lengh of data to hash in bytes + * @output: Place to put hash value + * @output_size: On entry, pointer to the number of bytes available in + * output. On exit, pointer to the number of bytes used. + * If NULL, then it is assumed that the caller has + * allocated enough space for the hash. This is possible + * since the caller is selecting the algorithm. + * @return 0 if ok, -ve on error: -EPROTONOSUPPORT for an unknown algorithm, + * -ENOSPC if the output buffer is not large enough. + */ +int hash_block(const char *algo_name, const void *data, unsigned int len, + uint8_t *output, int *output_size); + #endif diff --git a/include/image.h b/include/image.h index 4ad0e6b..b8cc523 100644 --- a/include/image.h +++ b/include/image.h @@ -36,6 +36,9 @@ #include "compiler.h" #include <asm/byteorder.h> +/* Define this to avoid #ifdefs later on */ +struct lmb; + #ifdef USE_HOSTCC /* new uImage format support enabled on host */ @@ -43,19 +46,79 @@ #define CONFIG_OF_LIBFDT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ +#define IMAGE_ENABLE_IGNORE 0 +#define IMAGE_INDENT_STRING "" + #else #include <lmb.h> #include <asm/u-boot.h> #include <command.h> +/* Take notice of the 'ignore' property for hashes */ +#define IMAGE_ENABLE_IGNORE 1 +#define IMAGE_INDENT_STRING " " + #endif /* USE_HOSTCC */ #if defined(CONFIG_FIT) #include <libfdt.h> #include <fdt_support.h> -#define CONFIG_MD5 /* FIT images need MD5 support */ -#define CONFIG_SHA1 /* and SHA1 */ +# ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_SPL_CRC32_SUPPORT +# define IMAGE_ENABLE_CRC32 1 +# endif +# ifdef CONFIG_SPL_MD5_SUPPORT +# define IMAGE_ENABLE_MD5 1 +# endif +# ifdef CONFIG_SPL_SHA1_SUPPORT +# define IMAGE_ENABLE_SHA1 1 +# endif +# else +# define CONFIG_CRC32 /* FIT images need CRC32 support */ +# define CONFIG_MD5 /* and MD5 */ +# define CONFIG_SHA1 /* and SHA1 */ +# define IMAGE_ENABLE_CRC32 1 +# define IMAGE_ENABLE_MD5 1 +# define IMAGE_ENABLE_SHA1 1 +# endif + +#ifndef IMAGE_ENABLE_CRC32 +#define IMAGE_ENABLE_CRC32 0 +#endif + +#ifndef IMAGE_ENABLE_MD5 +#define IMAGE_ENABLE_MD5 0 +#endif + +#ifndef IMAGE_ENABLE_SHA1 +#define IMAGE_ENABLE_SHA1 0 +#endif + +#endif /* CONFIG_FIT */ + +#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH +# define IMAGE_ENABLE_RAMDISK_HIGH 1 +#else +# define IMAGE_ENABLE_RAMDISK_HIGH 0 +#endif + +#ifdef CONFIG_OF_LIBFDT +# define IMAGE_ENABLE_OF_LIBFDT 1 +#else +# define IMAGE_ENABLE_OF_LIBFDT 0 +#endif + +#ifdef CONFIG_SYS_BOOT_GET_CMDLINE +# define IMAGE_BOOT_GET_CMDLINE 1 +#else +# define IMAGE_BOOT_GET_CMDLINE 0 +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +# define IMAAGE_OF_BOARD_SETUP 1 +#else +# define IMAAGE_OF_BOARD_SETUP 0 #endif /* @@ -244,9 +307,7 @@ typedef struct bootm_headers { ulong rd_start, rd_end;/* ramdisk start/end */ -#ifdef CONFIG_OF_LIBFDT char *ft_addr; /* flat dev tree address */ -#endif ulong ft_len; /* length of flat device tree */ ulong initrd_start; @@ -333,34 +394,35 @@ int genimg_get_type_id(const char *name); int genimg_get_comp_id(const char *name); void genimg_print_size(uint32_t size); +#if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ + defined(USE_HOSTCC) +#define IMAGE_ENABLE_TIMESTAMP 1 +#else +#define IMAGE_ENABLE_TIMESTAMP 0 +#endif +void genimg_print_time(time_t timestamp); + #ifndef USE_HOSTCC /* Image format types, returned by _get_format() routine */ #define IMAGE_FORMAT_INVALID 0x00 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ -int genimg_get_format(void *img_addr); +int genimg_get_format(const void *img_addr); int genimg_has_config(bootm_headers_t *images); ulong genimg_get_image(ulong img_addr); int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, uint8_t arch, ulong *rd_start, ulong *rd_end); - -#ifdef CONFIG_OF_LIBFDT int boot_get_fdt(int flag, int argc, char * const argv[], bootm_headers_t *images, char **of_flat_tree, ulong *of_size); void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); -#endif -#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, ulong *initrd_start, ulong *initrd_end); -#endif /* CONFIG_SYS_BOOT_RAMDISK_HIGH */ -#ifdef CONFIG_SYS_BOOT_GET_CMDLINE int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); -#endif /* CONFIG_SYS_BOOT_GET_CMDLINE */ #ifdef CONFIG_SYS_BOOT_GET_KBD int boot_get_kbd(struct lmb *lmb, bd_t **kbd); #endif /* CONFIG_SYS_BOOT_GET_KBD */ @@ -502,6 +564,31 @@ static inline int image_check_target_arch(const image_header_t *hdr) } #endif /* USE_HOSTCC */ +/** + * Set up properties in the FDT + * + * This sets up properties in the FDT that is to be passed to linux. + * + * @images: Images information + * @blob: FDT to update + * @of_size: Size of the FDT + * @lmb: Points to logical memory block structure + * @return 0 if ok, <0 on failure + */ +int image_setup_libfdt(bootm_headers_t *images, void *blob, + int of_size, struct lmb *lmb); + +/** + * Set up the FDT to use for booting a kernel + * + * This performs ramdisk setup, sets up the FDT if required, and adds + * paramters to the FDT if libfdt is available. + * + * @param images Images information + * @return 0 if ok, <0 on failure + */ +int image_setup_linux(bootm_headers_t *images); + /*******************************************************************/ /* New uImage format specific code (prefixed with fit_) */ /*******************************************************************/ @@ -543,7 +630,6 @@ int fit_parse_subimage(const char *spec, ulong addr_curr, void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); -void fit_image_print_hash(const void *fit, int noffset, const char *p); /** * fit_get_end - get FIT image size @@ -599,18 +685,19 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); -#ifndef USE_HOSTCC -int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); -#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); -int fit_set_hashes(void *fit); -int fit_image_set_hashes(void *fit, int image_noffset); -int fit_image_hash_set_value(void *fit, int noffset, uint8_t *value, - int value_len); -int fit_image_check_hashes(const void *fit, int noffset); -int fit_all_image_check_hashes(const void *fit); +/** + * fit_add_verification_data() - Calculate and add hashes to FIT + * + * @fit: Fit image to process + * @return 0 if ok, <0 for error + */ +int fit_add_verification_data(void *fit); + +int fit_image_verify(const void *fit, int noffset); +int fit_all_image_verify(const void *fit); int fit_image_check_os(const void *fit, int noffset, uint8_t os); int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); int fit_image_check_type(const void *fit, int noffset, uint8_t type); @@ -623,8 +710,28 @@ int fit_conf_get_kernel_node(const void *fit, int noffset); int fit_conf_get_ramdisk_node(const void *fit, int noffset); int fit_conf_get_fdt_node(const void *fit, int noffset); +/** + * fit_conf_get_prop_node() - Get node refered to by a configuration + * @fit: FIT to check + * @noffset: Offset of conf@xxx node to check + * @prop_name: Property to read from the conf node + * + * The conf@ nodes contain references to other nodes, using properties + * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), + * return the offset of the node referred to (e.g. offset of node + * "/images/kernel@1". + */ +int fit_conf_get_prop_node(const void *fit, int noffset, + const char *prop_name); + void fit_conf_print(const void *fit, int noffset, const char *p); +int fit_check_ramdisk(const void *fit, int os_noffset, + uint8_t arch, int verify); + +int calculate_hash(const void *data, int data_len, const char *algo, + uint8_t *value, int *value_len); + #ifndef USE_HOSTCC static inline int fit_image_check_target_arch(const void *fdt, int node) { diff --git a/include/libfdt.h b/include/libfdt.h index fc7f75b..c5ec2ac 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -136,6 +136,28 @@ uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); int fdt_next_node(const void *fdt, int offset, int *depth); +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + /**********************************************************************/ /* General functions */ /**********************************************************************/ @@ -582,7 +604,7 @@ const char *fdt_get_alias_namelen(const void *fdt, * value of the property named 'name' in the node /aliases. * * returns: - * a pointer to the expansion of the alias named 'name', of it exists + * a pointer to the expansion of the alias named 'name', if it exists * NULL, if the given alias or the /aliases node does not exist */ const char *fdt_get_alias(const void *fdt, const char *name); @@ -816,6 +838,20 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset, int fdt_node_offset_by_compatible(const void *fdt, int startoffset, const char *compatible); +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + /**********************************************************************/ /* Write-in-place functions */ /**********************************************************************/ diff --git a/include/libfdt_env.h b/include/libfdt_env.h index 3e3defc..0821258 100644 --- a/include/libfdt_env.h +++ b/include/libfdt_env.h @@ -35,4 +35,7 @@ typedef __be64 fdt64_t; #define fdt64_to_cpu(x) be64_to_cpu(x) #define cpu_to_fdt64(x) cpu_to_be64(x) +/* adding a ramdisk needs 0x44 bytes in version 2008.10 */ +#define FDT_RAMDISK_OVERHEAD 0x80 + #endif /* _LIBFDT_ENV_H */ diff --git a/include/lmb.h b/include/lmb.h index 5d1f4b6..43082a3 100644 --- a/include/lmb.h +++ b/include/lmb.h @@ -1,7 +1,6 @@ #ifndef _LINUX_LMB_H #define _LINUX_LMB_H #ifdef __KERNEL__ -#ifdef CONFIG_LMB #include <asm/types.h> /* @@ -57,7 +56,6 @@ lmb_size_bytes(struct lmb_region *type, unsigned long region_nr) void board_lmb_reserve(struct lmb *lmb); void arch_lmb_reserve(struct lmb *lmb); -#endif /* CONFIG_LMB */ #endif /* __KERNEL__ */ #endif /* _LINUX_LMB_H */ diff --git a/include/mmc.h b/include/mmc.h index 8bbc6b6..566db59 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -68,6 +68,7 @@ #define UNUSABLE_ERR -17 /* Unusable Card */ #define COMM_ERR -18 /* Communications Error */ #define TIMEOUT -19 +#define IN_PROGRESS -20 /* operation is in progress */ #define MMC_CMD_GO_IDLE_STATE 0 #define MMC_CMD_SEND_OP_COND 1 @@ -270,6 +271,10 @@ struct mmc { int (*getcd)(struct mmc *mmc); int (*getwp)(struct mmc *mmc); uint b_max; + char op_cond_pending; /* 1 if we are waiting on an op_cond command */ + char init_in_progress; /* 1 if we have done mmc_start_init() */ + char preinit; /* start init as early as possible */ + uint op_cond_response; /* the response byte from the last op_cond */ }; int mmc_register(struct mmc *mmc); @@ -287,6 +292,31 @@ int mmc_getcd(struct mmc *mmc); int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; +/** + * Start device initialization and return immediately; it does not block on + * polling OCR (operation condition register) status. Then you should call + * mmc_init, which would block on polling OCR status and complete the device + * initializatin. + * + * @param mmc Pointer to a MMC device struct + * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error. + */ +int mmc_start_init(struct mmc *mmc); + +/** + * Set preinit flag of mmc device. + * + * This will cause the device to be pre-inited during mmc_initialize(), + * which may save boot time if the device is not accessed until later. + * Some eMMC devices take 200-300ms to init, but unfortunately they + * must be sent a series of commands to even get them to start preparing + * for operation. + * + * @param mmc Pointer to a MMC device struct + * @param preinit preinit flag value + */ +void mmc_set_preinit(struct mmc *mmc, int preinit); + #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode); diff --git a/include/mpc8220.h b/include/mpc8220.h deleted file mode 100644 index c4900a0..0000000 --- a/include/mpc8220.h +++ /dev/null @@ -1,717 +0,0 @@ -/* - * include/mpc8220.h - * - * Prototypes, etc. for the Motorola MPC8220 - * embedded cpu chips - * - * 2004 (c) Freescale, Inc. - * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __MPC8220_H__ -#define __MPC8220_H__ - -/* Processor name */ -#if defined(CONFIG_MPC8220) -#define CPU_ID_STR "MPC8220" -#endif - -/* Exception offsets (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -/* Internal memory map */ -/* MPC8220 Internal Register MMAP */ -#define MMAP_MBAR (CONFIG_SYS_MBAR + 0x00000000) /* chip selects */ -#define MMAP_MEMCTL (CONFIG_SYS_MBAR + 0x00000100) /* sdram controller */ -#define MMAP_XLBARB (CONFIG_SYS_MBAR + 0x00000200) /* xlb arbitration control */ -#define MMAP_CDM (CONFIG_SYS_MBAR + 0x00000300) /* clock distribution module */ -#define MMAP_VDOPLL (CONFIG_SYS_MBAR + 0x00000400) /* video PLL */ -#define MMAP_FB (CONFIG_SYS_MBAR + 0x00000500) /* flex bus controller */ -#define MMAP_PCFG (CONFIG_SYS_MBAR + 0x00000600) /* port config */ -#define MMAP_ICTL (CONFIG_SYS_MBAR + 0x00000700) /* interrupt controller */ -#define MMAP_GPTMR (CONFIG_SYS_MBAR + 0x00000800) /* general purpose timers */ -#define MMAP_SLTMR (CONFIG_SYS_MBAR + 0x00000900) /* slice timers */ -#define MMAP_GPIO (CONFIG_SYS_MBAR + 0x00000A00) /* gpio module */ -#define MMAP_XCPCI (CONFIG_SYS_MBAR + 0x00000B00) /* pci controller */ -#define MMAP_PCIARB (CONFIG_SYS_MBAR + 0x00000C00) /* pci arbiter */ -#define MMAP_EXTDMA1 (CONFIG_SYS_MBAR + 0x00000D00) /* external dma1 */ -#define MMAP_EXTDMA2 (CONFIG_SYS_MBAR + 0x00000E00) /* external dma1 */ -#define MMAP_USBH (CONFIG_SYS_MBAR + 0x00001000) /* usb host */ -#define MMAP_CMTMR (CONFIG_SYS_MBAR + 0x00007f00) /* comm timers */ -#define MMAP_DMA (CONFIG_SYS_MBAR + 0x00008000) /* dma */ -#define MMAP_USBD (CONFIG_SYS_MBAR + 0x00008200) /* usb device */ -#define MMAP_COMMPCI (CONFIG_SYS_MBAR + 0x00008400) /* pci comm Bus regs */ -#define MMAP_1284 (CONFIG_SYS_MBAR + 0x00008500) /* 1284 */ -#define MMAP_PEV (CONFIG_SYS_MBAR + 0x00008600) /* print engine video */ -#define MMAP_PSC1 (CONFIG_SYS_MBAR + 0x00008800) /* psc1 block */ -#define MMAP_I2C (CONFIG_SYS_MBAR + 0x00008f00) /* i2c controller */ -#define MMAP_FEC1 (CONFIG_SYS_MBAR + 0x00009000) /* fast ethernet 1 */ -#define MMAP_FEC2 (CONFIG_SYS_MBAR + 0x00009800) /* fast ethernet 2 */ -#define MMAP_JBIGRAM (CONFIG_SYS_MBAR + 0x0000a000) /* jbig RAM */ -#define MMAP_JBIG (CONFIG_SYS_MBAR + 0x0000c000) /* jbig */ -#define MMAP_PDLA (CONFIG_SYS_MBAR + 0x00010000) /* */ -#define MMAP_SRAMCFG (CONFIG_SYS_MBAR + 0x0001ff00) /* SRAM config */ -#define MMAP_SRAM (CONFIG_SYS_MBAR + 0x00020000) /* SRAM */ - -#define SRAM_SIZE 0x8000 /* 32 KB */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for Programmable Serial Channel - */ -/* equates for mode reg. 1 for channel A or B */ -#define PSC_MR1_RX_RTS 0x80000000 /* receiver RTS enabled */ -#define PSC_MR1_RX_INT 0x40000000 /* receiver intrupt enabled */ -#define PSC_MR1_ERR_MODE 0x20000000 /* block error mode */ -#define PSC_MR1_PAR_MODE_MULTI 0x18000000 /* multi_drop mode */ -#define PSC_MR1_NO_PARITY 0x10000000 /* no parity mode */ -#define PSC_MR1_ALWAYS_0 0x08000000 /* force parity mode */ -#define PSC_MR1_ALWAYS_1 0x0c000000 /* force parity mode */ -#define PSC_MR1_EVEN_PARITY 0x00000000 /* parity mode */ -#define PSC_MR1_ODD_PARITY 0x04000000 /* 0 = even, 1 = odd */ -#define PSC_MR1_BITS_CHAR_8 0x03000000 /* 8 bits */ -#define PSC_MR1_BITS_CHAR_7 0x02000000 /* 7 bits */ -#define PSC_MR1_BITS_CHAR_6 0x01000000 /* 6 bits */ -#define PSC_MR1_BITS_CHAR_5 0x00000000 /* 5 bits */ - -/* equates for mode reg. 2 for channel A or B */ -#define PSC_MR2_NORMAL_MODE 0x00000000 /* normal channel mode */ -#define PSC_MR2_AUTO_MODE 0x40000000 /* automatic channel mode */ -#define PSC_MR2_LOOPBACK_LOCL 0x80000000 /* local loopback channel mode */ -#define PSC_MR2_LOOPBACK_REMT 0xc0000000 /* remote loopback channel mode */ -#define PSC_MR2_TX_RTS 0x20000000 /* transmitter RTS enabled */ -#define PSC_MR2_TX_CTS 0x10000000 /* transmitter CTS enabled */ -#define PSC_MR2_STOP_BITS_2 0x0f000000 /* 2 stop bits */ -#define PSC_MR2_STOP_BITS_1 0x07000000 /* 1 stop bit */ - -/* equates for status reg. A or B */ -#define PSC_SR_BREAK 0x80000000 /* received break */ -#define PSC_SR_NEOF PSC_SR_BREAK /* Next byte is EOF - MIR/FIR */ -#define PSC_SR_FRAMING 0x40000000 /* framing error */ -#define PSC_SR_PHYERR PSC_SR_FRAMING/* Physical Layer error - MIR/FIR */ -#define PSC_SR_PARITY 0x20000000 /* parity error */ -#define PSC_SR_CRCERR PSC_SR_PARITY /* CRC error */ -#define PSC_SR_OVERRUN 0x10000000 /* overrun error */ -#define PSC_SR_TXEMT 0x08000000 /* transmitter empty */ -#define PSC_SR_TXRDY 0x04000000 /* transmitter ready*/ -#define PSC_SR_FFULL 0x02000000 /* fifo full */ -#define PSC_SR_RXRDY 0x01000000 /* receiver ready */ -#define PSC_SR_DEOF 0x00800000 /* Detect EOF or RX-FIFO contain EOF */ -#define PSC_SR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for clock select reg. */ -#define PSC_CSRX16EXT_CLK 0x1110 /* x 16 ext_clock */ -#define PSC_CSRX1EXT_CLK 0x1111 /* x 1 ext_clock */ - -/* equates for command reg. A or B */ -#define PSC_CR_NO_COMMAND 0x00000000 /* no command */ -#define PSC_CR_RST_MR_PTR_CMD 0x10000000 /* reset mr pointer command */ -#define PSC_CR_RST_RX_CMD 0x20000000 /* reset receiver command */ -#define PSC_CR_RST_TX_CMD 0x30000000 /* reset transmitter command */ -#define PSC_CR_RST_ERR_STS_CMD 0x40000000 /* reset error status cmnd */ -#define PSC_CR_RST_BRK_INT_CMD 0x50000000 /* reset break int. command */ -#define PSC_CR_STR_BREAK_CMD 0x60000000 /* start break command */ -#define PSC_CR_STP_BREAK_CMD 0x70000000 /* stop break command */ -#define PSC_CR_RX_ENABLE 0x01000000 /* receiver enabled */ -#define PSC_CR_RX_DISABLE 0x02000000 /* receiver disabled */ -#define PSC_CR_TX_ENABLE 0x04000000 /* transmitter enabled */ -#define PSC_CR_TX_DISABLE 0x08000000 /* transmitter disabled */ - -/* equates for input port change reg. */ -#define PSC_IPCR_SYNC 0x80000000 /* Sync Detect */ -#define PSC_IPCR_D_CTS 0x10000000 /* Delta CTS */ -#define PSC_IPCR_CTS 0x01000000 /* CTS - current state of PSC_CTS */ - -/* equates for auxiliary control reg. (timer and counter clock selects) */ -#define PSC_ACR_BRG 0x80000000 /* for 68681 compatibility - baud rate gen select - 0 = set 1; 1 = set 2 - equates are set 2 ONLY */ -#define PSC_ACR_TMR_EXT_CLK_16 0x70000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_TMR_EXT_CLK 0x60000000 /* external clock */ -#define PSC_ACR_TMR_IP2_16 0x50000000 /* ip2 divided by 16 */ -#define PSC_ACR_TMR_IP2 0x40000000 /* ip2 */ -#define PSC_ACR_CTR_EXT_CLK_16 0x30000000 /* xtnl clock divided by 16 */ -#define PSC_ACR_CTR_TXCB 0x20000000 /* channel B xmitr clock */ -#define PSC_ACR_CTR_TXCA 0x10000000 /* channel A xmitr clock */ -#define PSC_ACR_CTR_IP2 0x00000000 /* ip2 */ -#define PSC_ACR_IEC0 0x01000000 /* interrupt enable ctrl for D_CTS */ - -/* equates for int. status reg. */ -#define PSC_ISR_IPC 0x80000000 /* input port change*/ -#define PSC_ISR_BREAK 0x04000000 /* delta break */ -#define PSC_ISR_RX_RDY 0x02000000 /* receiver rdy /fifo full */ -#define PSC_ISR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_ISR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_ISR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for int. mask reg. */ -#define PSC_IMR_CLEAR 0xff000000 /* Clear the imr */ -#define PSC_IMR_IPC 0x80000000 /* input port change*/ -#define PSC_IMR_BREAK 0x04000000 /* delta break */ -#define PSC_IMR_RX_RDY 0x02000000 /* rcvr ready / fifo full */ -#define PSC_IMR_TX_RDY 0x01000000 /* transmitter ready */ -#define PSC_IMR_DEOF 0x00800000 /* Detect EOF / RX-FIFO contains EOF */ -#define PSC_IMR_ERR 0x00400000 /* Error Status including FIFO */ - -/* equates for input port reg. */ -#define PSC_IP_LPWRB 0x80000000 /* Low power mode in Ac97 */ -#define PSC_IP_TGL 0x40000000 /* test usage */ -#define PSC_IP_CTS 0x01000000 /* CTS */ - -/* equates for output port bit set reg. */ -#define PSC_OPSET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for output port bit reset reg. */ -#define PSC_OPRESET_RTS 0x01000000 /* Assert PSC_RTS output */ - -/* equates for rx FIFO number of data reg. */ -#define PSC_RFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for tx FIFO number of data reg. */ -#define PSC_TFNUM(x) ((x&0xff)<<24)/* receive count */ - -/* equates for rx FIFO status reg */ -#define PSC_RFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_RFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_RFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_RFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_RFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_RFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_RFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_RFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_RFSTAT_OF 0x00100000 /* overflow */ -#define PSC_RFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_RFSTAT_FULL 0x00040000 /* full */ -#define PSC_RFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_RFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for tx FIFO status reg */ -#define PSC_TFSTAT_TAG(x) ((x&3)<<28) /* tag */ -#define PSC_TFSTAT_FRAME0 0x08 /* Frame Indicator 0 */ -#define PSC_TFSTAT_FRAME1 0x04 /* Frame Indicator 1 */ -#define PSC_TFSTAT_FRAME2 0x02 /* Frame Indicator 2 */ -#define PSC_TFSTAT_FRAME3 0x01 /* Frame Indicator 3 */ -#define PSC_TFSTAT_FRAME(x) ((x&0x0f)<<24)/* Frame indicator */ -#define PSC_TFSTAT_ERR 0x00400000 /* Fifo err */ -#define PSC_TFSTAT_UF 0x00200000 /* Underflow */ -#define PSC_TFSTAT_OF 0x00100000 /* overflow */ -#define PSC_TFSTAT_FR 0x00080000 /* frame ready */ -#define PSC_TFSTAT_FULL 0x00040000 /* full */ -#define PSC_TFSTAT_ALARM 0x00020000 /* alarm */ -#define PSC_TFSTAT_EMPTY 0x00010000 /* empty */ - -/* equates for rx FIFO control reg. */ -#define PSC_RFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_RFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_RFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for tx FIFO control reg. */ -#define PSC_TFCNTL_WTAG(x) ((x&3)<<29) /* Write tag */ -#define PSC_TFCNTL_FRAME 0x08000000 /* Frame mode enable */ -#define PSC_TFCNTL_GR(x) ((x&7)<<24) /* Granularity */ - -/* equates for rx FIFO alarm reg */ -#define PSC_RFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for tx FIFO alarm reg */ -#define PSC_TFALARM(x) (x&0x1ff) /* Alarm */ - -/* equates for rx FIFO read pointer */ -#define PSC_RFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for tx FIFO read pointer */ -#define PSC_TFRPTR(x) (x&0x1ff) /* read pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_RFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO write pointer */ -#define PSC_TFWPTR(x) (x&0x1ff) /* write pointer */ - -/* equates for rx FIFO last read frame pointer reg */ -#define PSC_RFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for tx FIFO last read frame pointer reg */ -#define PSC_TFLRFPTR(x) (x&0x1ff) /* last read frame pointer */ - -/* equates for rx FIFO last write frame pointer reg */ -#define PSC_RFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* equates for tx FIFO last write frame pointer reg */ -#define PSC_TFLWFPTR(x) (x&0x1ff) /* last write frame pointer */ - -/* PCI configuration (only for PLL determination)*/ -#define PCI_REG_PCIGSCR (MMAP_XCPCI + 0x60) /* Global status/control register */ -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK 0x07000000 -#define PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT 24 - -#define PCI_REG_PCICAR (MMAP_XCPCI + 0xF8) /* Configuration Address Register */ - -/* ------------------------------------------------------------------------ */ -/* - * Macro for General Purpose Timer - */ -/* Enable and Mode Select */ -#define GPT_OCT(x) (x & 0x3)<<4/* Output Compare Type */ -#define GPT_ICT(x) (x & 0x3) /* Input Capture Type */ -#define GPT_CTRL_WDEN 0x80 /* Watchdog Enable */ -#define GPT_CTRL_CE 0x10 /* Counter Enable */ -#define GPT_CTRL_STPCNT 0x04 /* Stop continous */ -#define GPT_CTRL_ODRAIN 0x02 /* Open Drain */ -#define GPT_CTRL_INTEN 0x01 /* Interrupt Enable */ -#define GPT_MODE_GPIO(x) (x & 0x3)<<4/* Gpio Mode Type */ -#define GPT_TMS_ICT 0x01 /* Input Capture Enable */ -#define GPT_TMS_OCT 0x02 /* Output Capture Enable */ -#define GPT_TMS_PWM 0x03 /* PWM Capture Enable */ -#define GPT_TMS_SGPIO 0x04 /* PWM Capture Enable */ - -#define GPT_PWM_WIDTH(x) (x & 0xffff) - -/* Status */ -#define GPT_STA_CAPTURE(x) (x & 0xffff)/* Read of internal counter */ - -#define GPT_OVFPIN_OVF(x) (x & 0x70) /* Internal counter roll over */ -#define GPT_OVFPIN_PIN 0x01 /* Input pin - Timer 0 and 1 */ - -#define GPT_INT_TEXP 0x08 /* Timer Expired in Internal Timer mode */ -#define GPT_INT_PWMP 0x04 /* PWM end of period occurred */ -#define GPT_INT_COMP 0x02 /* OC reference event occurred */ -#define GPT_INT_CAPT 0x01 /* IC reference event occurred */ - -/* ------------------------------------------------------------------------ */ -/* - * Port configuration - */ -#define CONFIG_SYS_FEC1_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_FEC1_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_1284_PORT1_CONFIG 0x00000000 -#define CONFIG_SYS_FEC2_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_PEV_PORT2_CONFIG 0x00000000 -#define CONFIG_SYS_GP0_PORT0_CONFIG 0x00000000 -#define CONFIG_SYS_GP1_PORT2_CONFIG 0xaaaaaac0 -#define CONFIG_SYS_PSC_PORT3_CONFIG 0x00020000 -#define CONFIG_SYS_CS1_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_CS2_PORT3_CONFIG 0x10000000 -#define CONFIG_SYS_CS3_PORT3_CONFIG 0x40000000 -#define CONFIG_SYS_CS4_PORT3_CONFIG 0x00000400 -#define CONFIG_SYS_CS5_PORT3_CONFIG 0x00000200 -#define CONFIG_SYS_PCI_PORT3_CONFIG 0x01400180 -#define CONFIG_SYS_I2C_PORT3_CONFIG 0x00000000 -#define CONFIG_SYS_GP2_PORT3_CONFIG 0x000200a0 - -/* ------------------------------------------------------------------------ */ -/* - * DRAM configuration - */ - -/* Field definitions for the control register */ -#define CTL_MODE_ENABLE_SHIFT 31 -#define CTL_CKE_SHIFT 30 -#define CTL_DDR_SHIFT 29 -#define CTL_REFRESH_SHIFT 28 -#define CTL_ADDRMUX_SHIFT 24 -#define CTL_PRECHARGE_SHIFT 23 -#define CTL_DRIVE_RULE_SHIFT 22 -#define CTL_REFRESH_INTERVAL_SHIFT 16 -#define CTL_DQSOEN_SHIFT 8 -#define CTL_BUFFERED_SHIFT 4 -#define CTL_REFRESH_CMD_SHIFT 2 -#define CTL_PRECHARGE_CMD_SHIFT 1 - -#define CTL_MODE_ENABLE (1<<CTL_MODE_ENABLE_SHIFT) -#define CTL_CKE_HIGH (1<<CTL_CKE_SHIFT) -#define CTL_DDR_MODE (1<<CTL_DDR_SHIFT) -#define CTL_REFRESH_ENABLE (1<<CTL_REFRESH_SHIFT) -#define CTL_ADDRMUX(value) ((value)<<CTL_ADDRMUX_SHIFT) -#define CTL_A8PRECHARGE (1<<CTL_PRECHARGE_SHIFT) -#define CTL_REFRESH_INTERVAL(value) ((value)<<CTL_REFRESH_INTERVAL_SHIFT) -#define CTL_DQSOEN(value) ((value)<<CTL_DQSOEN_SHIFT) -#define CTL_BUFFERED (1<<CTL_BUFFERED_SHIFT) -#define CTL_REFRESH_CMD (1<<CTL_REFRESH_CMD_SHIFT) -#define CTL_PRECHARGE_CMD (1<<CTL_PRECHARGE_CMD_SHIFT) - -/* Field definitions for config register 1 */ - -#define CFG1_SRD2RWP_SHIFT 28 -#define CFG1_SWT2RWP_SHIFT 24 -#define CFG1_RLATENCY_SHIFT 20 -#define CFG1_ACT2WR_SHIFT 16 -#define CFG1_PRE2ACT_SHIFT 12 -#define CFG1_REF2ACT_SHIFT 8 -#define CFG1_WLATENCY_SHIFT 4 - -#define CFG1_SRD2RWP(value) ((value)<<CFG1_SRD2RWP_SHIFT) -#define CFG1_SWT2RWP(value) ((value)<<CFG1_SWT2RWP_SHIFT) -#define CFG1_RLATENCY(value) ((value)<<CFG1_RLATENCY_SHIFT) -#define CFG1_ACT2WR(value) ((value)<<CFG1_ACT2WR_SHIFT) -#define CFG1_PRE2ACT(value) ((value)<<CFG1_PRE2ACT_SHIFT) -#define CFG1_REF2ACT(value) ((value)<<CFG1_REF2ACT_SHIFT) -#define CFG1_WLATENCY(value) ((value)<<CFG1_WLATENCY_SHIFT) - -/* Field definitions for config register 2 */ -#define CFG2_BRD2RP_SHIFT 28 -#define CFG2_BWT2RWP_SHIFT 24 -#define CFG2_BRD2WT_SHIFT 20 -#define CFG2_BURSTLEN_SHIFT 16 - -#define CFG2_BRD2RP(value) ((value)<<CFG2_BRD2RP_SHIFT) -#define CFG2_BWT2RWP(value) ((value)<<CFG2_BWT2RWP_SHIFT) -#define CFG2_BRD2WT(value) ((value)<<CFG2_BRD2WT_SHIFT) -#define CFG2_BURSTLEN(value) ((value)<<CFG2_BURSTLEN_SHIFT) - -/* Field definitions for the mode/extended mode register - mode - * register access - */ -#define MODE_REG_SHIFT 30 -#define MODE_OPMODE_SHIFT 25 -#define MODE_CL_SHIFT 22 -#define MODE_BT_SHIFT 21 -#define MODE_BURSTLEN_SHIFT 18 -#define MODE_CMD_SHIFT 16 - -#define MODE_MODE 0 -#define MODE_OPMODE(value) ((value)<<MODE_OPMODE_SHIFT) -#define MODE_CL(value) ((value)<<MODE_CL_SHIFT) -#define MODE_BT_INTERLEAVED (1<<MODE_BT_SHIFT) -#define MODE_BT_SEQUENTIAL (0<<MODE_BT_SHIFT) -#define MODE_BURSTLEN(value) ((value)<<MODE_BURSTLEN_SHIFT) -#define MODE_CMD (1<<MODE_CMD_SHIFT) - -#define MODE_BURSTLEN_8 3 -#define MODE_BURSTLEN_4 2 -#define MODE_BURSTLEN_2 1 - -#define MODE_CL_2 2 -#define MODE_CL_2p5 6 -#define MODE_OPMODE_NORMAL 0 -#define MODE_OPMODE_RESETDLL 2 - - -/* Field definitions for the mode/extended mode register - extended - * mode register access - */ -#define MODE_X_DLL_SHIFT 18 /* DLL enable/disable */ -#define MODE_X_DS_SHIFT 19 /* Drive strength normal/reduced */ -#define MODE_X_QFC_SHIFT 20 /* QFC function (whatever that is) */ -#define MODE_X_OPMODE_SHIFT 21 - -#define MODE_EXTENDED (1<<MODE_REG_SHIFT) -#define MODE_X_DLL_ENABLE 0 -#define MODE_X_DLL_DISABLE (1<<MODE_X_DLL_SHIFT) -#define MODE_X_DS_NORMAL 0 -#define MODE_X_DS_REDUCED (1<<MODE_X_DS_SHIFT) -#define MODE_X_QFC_DISABLED 0 -#define MODE_X_OPMODE(value) ((value)<<MODE_X_OPMODE_SHIFT) - -#ifndef __ASSEMBLY__ -/* - * DMA control/status registers. - */ -struct mpc8220_dma { - u32 taskBar; /* DMA + 0x00 */ - u32 currentPointer; /* DMA + 0x04 */ - u32 endPointer; /* DMA + 0x08 */ - u32 variablePointer;/* DMA + 0x0c */ - - u8 IntVect1; /* DMA + 0x10 */ - u8 IntVect2; /* DMA + 0x11 */ - u16 PtdCntrl; /* DMA + 0x12 */ - - u32 IntPend; /* DMA + 0x14 */ - u32 IntMask; /* DMA + 0x18 */ - - u16 tcr_0; /* DMA + 0x1c */ - u16 tcr_1; /* DMA + 0x1e */ - u16 tcr_2; /* DMA + 0x20 */ - u16 tcr_3; /* DMA + 0x22 */ - u16 tcr_4; /* DMA + 0x24 */ - u16 tcr_5; /* DMA + 0x26 */ - u16 tcr_6; /* DMA + 0x28 */ - u16 tcr_7; /* DMA + 0x2a */ - u16 tcr_8; /* DMA + 0x2c */ - u16 tcr_9; /* DMA + 0x2e */ - u16 tcr_a; /* DMA + 0x30 */ - u16 tcr_b; /* DMA + 0x32 */ - u16 tcr_c; /* DMA + 0x34 */ - u16 tcr_d; /* DMA + 0x36 */ - u16 tcr_e; /* DMA + 0x38 */ - u16 tcr_f; /* DMA + 0x3a */ - - u8 IPR0; /* DMA + 0x3c */ - u8 IPR1; /* DMA + 0x3d */ - u8 IPR2; /* DMA + 0x3e */ - u8 IPR3; /* DMA + 0x3f */ - u8 IPR4; /* DMA + 0x40 */ - u8 IPR5; /* DMA + 0x41 */ - u8 IPR6; /* DMA + 0x42 */ - u8 IPR7; /* DMA + 0x43 */ - u8 IPR8; /* DMA + 0x44 */ - u8 IPR9; /* DMA + 0x45 */ - u8 IPR10; /* DMA + 0x46 */ - u8 IPR11; /* DMA + 0x47 */ - u8 IPR12; /* DMA + 0x48 */ - u8 IPR13; /* DMA + 0x49 */ - u8 IPR14; /* DMA + 0x4a */ - u8 IPR15; /* DMA + 0x4b */ - u8 IPR16; /* DMA + 0x4c */ - u8 IPR17; /* DMA + 0x4d */ - u8 IPR18; /* DMA + 0x4e */ - u8 IPR19; /* DMA + 0x4f */ - u8 IPR20; /* DMA + 0x50 */ - u8 IPR21; /* DMA + 0x51 */ - u8 IPR22; /* DMA + 0x52 */ - u8 IPR23; /* DMA + 0x53 */ - u8 IPR24; /* DMA + 0x54 */ - u8 IPR25; /* DMA + 0x55 */ - u8 IPR26; /* DMA + 0x56 */ - u8 IPR27; /* DMA + 0x57 */ - u8 IPR28; /* DMA + 0x58 */ - u8 IPR29; /* DMA + 0x59 */ - u8 IPR30; /* DMA + 0x5a */ - u8 IPR31; /* DMA + 0x5b */ - - u32 res1; /* DMA + 0x5c */ - u32 res2; /* DMA + 0x60 */ - u32 res3; /* DMA + 0x64 */ - u32 MDEDebug; /* DMA + 0x68 */ - u32 ADSDebug; /* DMA + 0x6c */ - u32 Value1; /* DMA + 0x70 */ - u32 Value2; /* DMA + 0x74 */ - u32 Control; /* DMA + 0x78 */ - u32 Status; /* DMA + 0x7c */ - u32 EU00; /* DMA + 0x80 */ - u32 EU01; /* DMA + 0x84 */ - u32 EU02; /* DMA + 0x88 */ - u32 EU03; /* DMA + 0x8c */ - u32 EU04; /* DMA + 0x90 */ - u32 EU05; /* DMA + 0x94 */ - u32 EU06; /* DMA + 0x98 */ - u32 EU07; /* DMA + 0x9c */ - u32 EU10; /* DMA + 0xa0 */ - u32 EU11; /* DMA + 0xa4 */ - u32 EU12; /* DMA + 0xa8 */ - u32 EU13; /* DMA + 0xac */ - u32 EU14; /* DMA + 0xb0 */ - u32 EU15; /* DMA + 0xb4 */ - u32 EU16; /* DMA + 0xb8 */ - u32 EU17; /* DMA + 0xbc */ - u32 EU20; /* DMA + 0xc0 */ - u32 EU21; /* DMA + 0xc4 */ - u32 EU22; /* DMA + 0xc8 */ - u32 EU23; /* DMA + 0xcc */ - u32 EU24; /* DMA + 0xd0 */ - u32 EU25; /* DMA + 0xd4 */ - u32 EU26; /* DMA + 0xd8 */ - u32 EU27; /* DMA + 0xdc */ - u32 EU30; /* DMA + 0xe0 */ - u32 EU31; /* DMA + 0xe4 */ - u32 EU32; /* DMA + 0xe8 */ - u32 EU33; /* DMA + 0xec */ - u32 EU34; /* DMA + 0xf0 */ - u32 EU35; /* DMA + 0xf4 */ - u32 EU36; /* DMA + 0xf8 */ - u32 EU37; /* DMA + 0xfc */ -}; - -/* - * PCI Header Registers - */ -typedef struct mpc8220_xcpci { - u32 dev_ven_id; /* 0xb00 - device/vendor ID */ - u32 stat_cmd_reg; /* 0xb04 - status command register */ - u32 class_code_rev_id; /* 0xb08 - class code / revision ID */ - u32 bist_htyp_lat_cshl; /* 0xb0c - BIST/HeaderType/Latency/cache line */ - u32 base0; /* 0xb10 - base address 0 */ - u32 base1; /* 0xb14 - base address 1 */ - u32 reserved1[4]; /* 0xb18->0xd27 - base address 2 - 5 */ - u32 cis; /* 0xb28 - cardBus CIS pointer */ - u32 sub_sys_ven_id; /* 0xb2c - sub system ID/ subsystem vendor ID */ - u32 reserved2; /* 0xb30 - expansion ROM base address */ - u32 reserved3; /* 0xb00 - reserved */ - u32 reserved4; /* 0xb00 - reserved */ - u32 mlat_mgnt_ipl; /* 0xb3c - MaxLat/MinGnt/ int pin/int line */ - u32 reserved5[8]; - /* MPC8220 specific - not accessible in PCI header space externally */ - u32 glb_stat_ctl; /* 0xb60 - Global Status Control */ - u32 target_bar0; /* 0xb64 - Target Base Address 0 */ - u32 target_bar1; /* 0xb68 - Target Base Address 1 */ - u32 target_ctrl; /* 0xb6c - Target Control */ - u32 init_win0; /* 0xb70 - Initiator Window 0 Base/Translation */ - u32 init_win1; /* 0xb74 - Initiator Window 1 Base/Translation */ - u32 init_win2; /* 0xb78 - Initiator Window 2 Base/Translation */ - u32 reserved6; /* 0xb7c - reserved */ - u32 init_win_cfg; /* 0xb80 */ - u32 init_ctrl; /* 0xb84 */ - u32 init_stat; /* 0xb88 */ - u32 reserved7[27]; - u32 cfg_adr; /* 0xbf8 */ - u32 reserved8; -} mpc8220_xcpci_t; - -/* PCI->XLB space translation (MPC8220 target), reg0 can address max 256MB, - reg1 - 1GB */ -#define PCI_BASE_ADDR_REG0 0x40000000 -#define PCI_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_REG0 (CONFIG_SYS_MBAR) -#define PCI_TARGET_BASE_ADDR_REG1 (CONFIG_SYS_SDRAM_BASE) -#define PCI_TARGET_BASE_ADDR_EN 1<<0 - - -/* PCI Global Status/Control Register (PCIGSCR) */ -#define PCI_GLB_STAT_CTRL_PE_SHIFT 29 -#define PCI_GLB_STAT_CTRL_SE_SHIFT 28 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_SHIFT 24 -#define PCI_GLB_STAT_CTRL_XLB_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_SHIFT 16 -#define PCI_GLB_STAT_CTRL_IPG_TO_PCI_CLK_MASK 0x7 -#define PCI_GLB_STAT_CTRL_PEE_SHIFT 13 -#define PCI_GLB_STAT_CTRL_SEE_SHIFT 12 -#define PCI_GLB_STAT_CTRL_PR_SHIFT 0 - -#define PCI_GLB_STAT_CTRL_PE (1<<PCI_GLB_STAT_CTRL_PE_SHIFT) -#define PCI_GLB_STAT_CTRL_SE (1<<PCI_GLB_STAT_CTRL_SE_SHIFT) -#define PCI_GLB_STAT_CTRL_PEE (1<<PCI_GLB_STAT_CTRL_PEE_SHIFT) -#define PCI_GLB_STAT_CTRL_SEE (1<<PCI_GLB_STAT_CTRL_SEE_SHIFT) -#define PCI_GLB_STAT_CTRL_PR (1<<PCI_GLB_STAT_CTRL_PR_SHIFT) - -/* PCI Target Control Register (PCITCR) */ -#define PCI_TARGET_CTRL_LD_SHIFT 24 -#define PCI_TARGET_CTRL_P_SHIFT 16 - -#define PCI_TARGET_CTRL_LD (1<<PCI_TARGET_CTRL_LD_SHIFT) -#define PCI_TARGET_CTRL_P (1<<PCI_TARGET_CTRL_P_SHIFT) - -/* PCI Initiator Window Configuration Register (PCIIWCR) */ -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT 27 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_SHIFT 25 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT 24 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT 19 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_SHIFT 17 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT 16 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT 11 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_SHIFT 9 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_PRC_MASK 0x3 -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT 8 - -#define PCI_INIT_WIN_CFG_WIN_MEM_READ 0x0 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_LINE 0x1 -#define PCI_INIT_WIN_CFG_WIN_MEM_READ_MULTIPLE 0x2 - -#define PCI_INIT_WIN_CFG_WIN0_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN0_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN0_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN1_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN1_CTRL_EN_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_IO (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_IO_SHIFT) -#define PCI_INIT_WIN_CFG_WIN2_CTRL_EN (1<<PCI_INIT_WIN_CFG_WIN2_CTRL_EN_SHIFT) - -/* PCI Initiator Control Register (PCIICR) */ -#define PCI_INIT_CTRL_REE_SHIFT 26 -#define PCI_INIT_CTRL_IAE_SHIFT 25 -#define PCI_INIT_CTRL_TAE_SHIFT 24 -#define PCI_INIT_CTRL_MAX_RETRIES_SHIFT 0 -#define PCI_INIT_CTRL_MAX_RETRIES_MASK 0xff - -#define PCI_INIT_CTRL_REE (1<<PCI_INIT_CTRL_REE_SHIFT) -#define PCI_INIT_CTRL_IAE (1<<PCI_INIT_CTRL_IAE_SHIFT) -#define PCI_INIT_CTRL_TAE (1<<PCI_INIT_CTRL_TAE_SHIFT) - -/* PCI Status/Command Register (PCISCR) - PCI Dword 1 */ -#define PCI_STAT_CMD_PE_SHIFT 31 -#define PCI_STAT_CMD_SE_SHIFT 30 -#define PCI_STAT_CMD_MA_SHIFT 29 -#define PCI_STAT_CMD_TR_SHIFT 28 -#define PCI_STAT_CMD_TS_SHIFT 27 -#define PCI_STAT_CMD_DT_SHIFT 25 -#define PCI_STAT_CMD_DT_MASK 0x3 -#define PCI_STAT_CMD_DP_SHIFT 24 -#define PCI_STAT_CMD_FC_SHIFT 23 -#define PCI_STAT_CMD_R_SHIFT 22 -#define PCI_STAT_CMD_66M_SHIFT 21 -#define PCI_STAT_CMD_C_SHIFT 20 -#define PCI_STAT_CMD_F_SHIFT 9 -#define PCI_STAT_CMD_S_SHIFT 8 -#define PCI_STAT_CMD_ST_SHIFT 7 -#define PCI_STAT_CMD_PER_SHIFT 6 -#define PCI_STAT_CMD_V_SHIFT 5 -#define PCI_STAT_CMD_MW_SHIFT 4 -#define PCI_STAT_CMD_SP_SHIFT 3 -#define PCI_STAT_CMD_B_SHIFT 2 -#define PCI_STAT_CMD_M_SHIFT 1 -#define PCI_STAT_CMD_IO_SHIFT 0 - -#define PCI_STAT_CMD_PE (1<<PCI_STAT_CMD_PE_SHIFT) -#define PCI_STAT_CMD_SE (1<<PCI_STAT_CMD_SE_SHIFT) -#define PCI_STAT_CMD_MA (1<<PCI_STAT_CMD_MA_SHIFT) -#define PCI_STAT_CMD_TR (1<<PCI_STAT_CMD_TR_SHIFT) -#define PCI_STAT_CMD_TS (1<<PCI_STAT_CMD_TS_SHIFT) -#define PCI_STAT_CMD_DP (1<<PCI_STAT_CMD_DP_SHIFT) -#define PCI_STAT_CMD_FC (1<<PCI_STAT_CMD_FC_SHIFT) -#define PCI_STAT_CMD_R (1<<PCI_STAT_CMD_R_SHIFT) -#define PCI_STAT_CMD_66M (1<<PCI_STAT_CMD_66M_SHIFT) -#define PCI_STAT_CMD_C (1<<PCI_STAT_CMD_C_SHIFT) -#define PCI_STAT_CMD_F (1<<PCI_STAT_CMD_F_SHIFT) -#define PCI_STAT_CMD_S (1<<PCI_STAT_CMD_S_SHIFT) -#define PCI_STAT_CMD_ST (1<<PCI_STAT_CMD_ST_SHIFT) -#define PCI_STAT_CMD_PER (1<<PCI_STAT_CMD_PER_SHIFT) -#define PCI_STAT_CMD_V (1<<PCI_STAT_CMD_V_SHIFT) -#define PCI_STAT_CMD_MW (1<<PCI_STAT_CMD_MW_SHIFT) -#define PCI_STAT_CMD_SP (1<<PCI_STAT_CMD_SP_SHIFT) -#define PCI_STAT_CMD_B (1<<PCI_STAT_CMD_B_SHIFT) -#define PCI_STAT_CMD_M (1<<PCI_STAT_CMD_M_SHIFT) -#define PCI_STAT_CMD_IO (1<<PCI_STAT_CMD_IO_SHIFT) - -/* PCI Configuration 1 Register (PCICR1) - PCI Dword 3 */ -#define PCI_CFG1_HT_SHIFT 16 -#define PCI_CFG1_HT_MASK 0xff -#define PCI_CFG1_LT_SHIFT 8 -#define PCI_CFG1_LT_MASK 0xff -#define PCI_CFG1_CLS_SHIFT 0 -#define PCI_CFG1_CLS_MASK 0xf - -/* function prototypes */ -void loadtask(int basetask, int tasks); -u32 dramSetup(void); - -#if defined(CONFIG_PSC_CONSOLE) -int psc_serial_init (void); -void psc_serial_putc(const char c); -void psc_serial_puts (const char *s); -int psc_serial_getc(void); -int psc_serial_tstc(void); -void psc_serial_setbrg(void); -#endif - -#if defined (CONFIG_EXTUART_CONSOLE) -int ext_serial_init (void); -void ext_serial_putc(const char c); -void ext_serial_puts (const char *s); -int ext_serial_getc(void); -int ext_serial_tstc(void); -void ext_serial_setbrg(void); -#endif - -#endif /* __ASSEMBLY__ */ - -#endif /* __MPC8220_H__ */ diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 966b5e0..b644b91 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -129,12 +129,16 @@ typedef union { } cfiword_t; /* CFI standard query structure */ +/* The offsets and sizes of this packed structure members correspond + * to the actual layout in CFI Flash chips. Some 16- and 32-bit members + * are unaligned and must be accessed with explicit unaligned access macros. + */ struct cfi_qry { u8 qry[3]; - u16 p_id; - u16 p_adr; - u16 a_id; - u16 a_adr; + u16 p_id; /* unaligned */ + u16 p_adr; /* unaligned */ + u16 a_id; /* unaligned */ + u16 a_adr; /* unaligned */ u8 vcc_min; u8 vcc_max; u8 vpp_min; @@ -148,10 +152,10 @@ struct cfi_qry { u8 block_erase_timeout_max; u8 chip_erase_timeout_max; u8 dev_size; - u16 interface_desc; - u16 max_buf_write_size; + u16 interface_desc; /* aligned */ + u16 max_buf_write_size; /* aligned */ u8 num_erase_regions; - u32 erase_region_info[NUM_ERASE_REGIONS]; + u32 erase_region_info[NUM_ERASE_REGIONS]; /* unaligned */ } __attribute__((packed)); struct cfi_pri_hdr { diff --git a/include/netdev.h b/include/netdev.h index 516b351..df454b5 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -77,7 +77,6 @@ int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); int mpc512x_fec_initialize(bd_t *bis); int mpc5xxx_fec_initialize(bd_t *bis); -int mpc8220_fec_initialize(bd_t *bis); int mpc82xx_scc_enet_initialize(bd_t *bis); int mvgbe_initialize(bd_t *bis); int natsemi_initialize(bd_t *bis); diff --git a/include/phy.h b/include/phy.h index 7b4ce74..75bf3b4 100644 --- a/include/phy.h +++ b/include/phy.h @@ -52,6 +52,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, @@ -67,6 +68,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", [PHY_INTERFACE_MODE_RGMII] = "rgmii", diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index 2db4784..c0f8cc8 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -175,7 +175,7 @@ #define IM_IMMR (IM_REGBASE+0x01a8) #define IM_SCCR (IM_REGBASE+0x0c80) -#elif defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8220) +#elif defined(CONFIG_MPC5xxx) #define HID0_ICE_BITPOS 16 #define HID0_DCE_BITPOS 17 diff --git a/include/usb.h b/include/usb.h index d79c865..d7b082d 100644 --- a/include/usb.h +++ b/include/usb.h @@ -76,6 +76,12 @@ struct usb_interface { unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; + /* + * Super Speed Device will have Super Speed Endpoint + * Companion Descriptor (section 9.6.7 of usb 3.0 spec) + * Revision 1.0 June 6th 2011 + */ + struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); /* Configuration information.. */ diff --git a/include/usb_defs.h b/include/usb_defs.h index 9502544..4f3601a 100644 --- a/include/usb_defs.h +++ b/include/usb_defs.h @@ -150,6 +150,18 @@ #define USB_REQ_SET_IDLE 0x0A #define USB_REQ_SET_PROTOCOL 0x0B +/* Device features */ +#define USB_FEAT_HALT 0x00 +#define USB_FEAT_WAKEUP 0x01 +#define USB_FEAT_TEST 0x02 + +/* Test modes */ +#define USB_TEST_MODE_J 0x01 +#define USB_TEST_MODE_K 0x02 +#define USB_TEST_MODE_SE0_NAK 0x03 +#define USB_TEST_MODE_PACKET 0x04 +#define USB_TEST_MODE_FORCE_ENABLE 0x05 + /* "pipe" definitions */ @@ -208,6 +220,18 @@ #define USB_PORT_FEAT_C_SUSPEND 18 #define USB_PORT_FEAT_C_OVER_CURRENT 19 #define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 + +/* + * Changes to Port feature numbers for Super speed, + * from USB 3.0 spec Table 10-8 + */ +#define USB_SS_PORT_FEAT_U1_TIMEOUT 23 +#define USB_SS_PORT_FEAT_U2_TIMEOUT 24 +#define USB_SS_PORT_FEAT_C_LINK_STATE 25 +#define USB_SS_PORT_FEAT_C_CONFIG_ERROR 26 +#define USB_SS_PORT_FEAT_BH_RESET 28 +#define USB_SS_PORT_FEAT_C_BH_RESET 29 /* wPortStatus bits */ #define USB_PORT_STAT_CONNECTION 0x0001 @@ -218,9 +242,19 @@ #define USB_PORT_STAT_POWER 0x0100 #define USB_PORT_STAT_LOW_SPEED 0x0200 #define USB_PORT_STAT_HIGH_SPEED 0x0400 /* support for EHCI */ -#define USB_PORT_STAT_SPEED \ +#define USB_PORT_STAT_SUPER_SPEED 0x0600 /* faking support to XHCI */ +#define USB_PORT_STAT_SPEED_MASK \ (USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED) +/* + * Changes to wPortStatus bit field in USB 3.0 + * See USB 3.0 spec Table 10-11 + */ +#define USB_SS_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_SS_PORT_STAT_SPEED_5GBPS 0x0000 + /* wPortChange bits */ #define USB_PORT_STAT_C_CONNECTION 0x0001 #define USB_PORT_STAT_C_ENABLE 0x0002 @@ -228,13 +262,21 @@ #define USB_PORT_STAT_C_OVERCURRENT 0x0008 #define USB_PORT_STAT_C_RESET 0x0010 +/* + * Changes to wPortChange bit fields in USB 3.0 + * See USB 3.0 spec Table 10-12 + */ +#define USB_SS_PORT_STAT_C_BH_RESET 0x0020 +#define USB_SS_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_SS_PORT_STAT_C_CONFIG_ERROR 0x0080 + /* wHubCharacteristics (masks) */ #define HUB_CHAR_LPSM 0x0003 #define HUB_CHAR_COMPOUND 0x0004 #define HUB_CHAR_OCPM 0x0018 /* - *Hub Status & Hub Change bit masks + * Hub Status & Hub Change bit masks */ #define HUB_STATUS_LOCAL_POWER 0x0001 #define HUB_STATUS_OVERCURRENT 0x0002 diff --git a/include/watchdog.h b/include/watchdog.h index 97ec186..d95e4b1 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -108,8 +108,7 @@ int init_func_watchdog_reset(void); void reset_4xx_watchdog(void); #endif -/* Freescale i.MX */ -#if defined(CONFIG_IMX_WATCHDOG) && !defined(__ASSEMBLY__) +#if defined(CONFIG_HW_WATCHDOG) && !defined(__ASSEMBLY__) void hw_watchdog_init(void); #endif #endif /* _WATCHDOG_H_ */ diff --git a/lib/hashtable.c b/lib/hashtable.c index 6050dd0..4cdbc95 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -901,6 +901,12 @@ int himport_r(struct hsearch_data *htab, *sp++ = '\0'; /* terminate value */ ++dp; + if (*name == 0) { + debug("INSERT: unable to use an empty key\n"); + __set_errno(EINVAL); + return 0; + } + /* Skip variables which are not supposed to be processed */ if (!drop_var_from_set(name, nvars, localvars)) continue; diff --git a/lib/libfdt/fdt.c b/lib/libfdt/fdt.c index 387e354..154e9a4 100644 --- a/lib/libfdt/fdt.c +++ b/lib/libfdt/fdt.c @@ -202,6 +202,34 @@ int fdt_next_node(const void *fdt, int offset, int *depth) return offset; } +int fdt_first_subnode(const void *fdt, int offset) +{ + int depth = 0; + + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth != 1) + return -FDT_ERR_NOTFOUND; + + return offset; +} + +int fdt_next_subnode(const void *fdt, int offset) +{ + int depth = 1; + + /* + * With respect to the parent, the depth of the next subnode will be + * the same as the last. + */ + do { + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth < 1) + return -FDT_ERR_NOTFOUND; + } while (depth > 1); + + return offset; +} + const char *_fdt_find_string(const char *strtab, int tabsize, const char *s) { int len = strlen(s) + 1; diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c index 1a461c3..b65f4e2 100644 --- a/lib/libfdt/fdt_ro.c +++ b/lib/libfdt/fdt_ro.c @@ -519,8 +519,7 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) return offset; /* error from fdt_next_node() */ } -static int _fdt_stringlist_contains(const char *strlist, int listlen, - const char *str) +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str) { int len = strlen(str); const char *p; @@ -546,7 +545,7 @@ int fdt_node_check_compatible(const void *fdt, int nodeoffset, prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); if (!prop) return len; - if (_fdt_stringlist_contains(prop, len, compatible)) + if (fdt_stringlist_contains(prop, len, compatible)) return 0; else return 1; diff --git a/tools/Makefile b/tools/Makefile index 889c897..26eb500 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -78,6 +78,7 @@ BIN_FILES-$(CONFIG_KIRKWOOD) += kwboot$(SFX) # Source files which exist outside the tools directory EXT_OBJ_FILES-$(CONFIG_BUILD_ENVCRC) += common/env_embedded.o EXT_OBJ_FILES-y += common/image.o +EXT_OBJ_FILES-$(CONFIG_FIT) += common/image-fit.o EXT_OBJ_FILES-y += lib/crc32.o EXT_OBJ_FILES-y += lib/md5.o EXT_OBJ_FILES-y += lib/sha1.o @@ -95,6 +96,7 @@ NOPED_OBJ_FILES-y += aisimage.o NOPED_OBJ_FILES-y += kwbimage.o NOPED_OBJ_FILES-y += pblimage.o NOPED_OBJ_FILES-y += imximage.o +NOPED_OBJ_FILES-y += image-host.o NOPED_OBJ_FILES-y += omapimage.o NOPED_OBJ_FILES-y += mkenvimage.o NOPED_OBJ_FILES-y += mkimage.o @@ -209,7 +211,9 @@ $(obj)mkimage$(SFX): $(obj)aisimage.o \ $(obj)crc32.o \ $(obj)default_image.o \ $(obj)fit_image.o \ + $(obj)image-fit.o \ $(obj)image.o \ + $(obj)image-host.o \ $(obj)imximage.o \ $(obj)kwbimage.o \ $(obj)pblimage.o \ diff --git a/tools/aisimage.c b/tools/aisimage.c index c645708..659df8c 100644 --- a/tools/aisimage.c +++ b/tools/aisimage.c @@ -32,7 +32,6 @@ #define WORD_ALIGN0 4 #define WORD_ALIGN(len) (((len)+WORD_ALIGN0-1) & ~(WORD_ALIGN0-1)) #define MAX_CMD_BUFFER 4096 -#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0])) static uint32_t ais_img_size; diff --git a/tools/buildman/control.py b/tools/buildman/control.py index 8d7b9b5..4319ce7 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -111,6 +111,10 @@ def DoBuildman(options, args): print col.Color(col.RED, str) sys.exit(1) count = gitutil.CountCommitsInBranch(options.git_dir, options.branch) + if count is None: + str = "Branch '%s' not found or has no upstream" % options.branch + print col.Color(col.RED, str) + sys.exit(1) count += 1 # Build upstream commit also if not count: @@ -137,6 +141,11 @@ def DoBuildman(options, args): upstream_commit = gitutil.GetUpstream(options.git_dir, options.branch) series = patchstream.GetMetaDataForList(upstream_commit, options.git_dir, 1) + # Conflicting tags are not a problem for buildman, since it does not use + # them. For example, Series-version is not useful for buildman. On the + # other hand conflicting tags will cause an error. So allow later tags + # to overwrite earlier ones. + series.allow_overwrite = True series = patchstream.GetMetaDataForList(range_expr, options.git_dir, None, series) diff --git a/tools/fit_image.c b/tools/fit_image.c index 76bbba1..cc123dd 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -47,6 +47,48 @@ static int fit_check_image_types (uint8_t type) return EXIT_FAILURE; } +int mmap_fdt(struct mkimage_params *params, const char *fname, void **blobp, + struct stat *sbuf) +{ + void *ptr; + int fd; + + /* Load FIT blob into memory (we need to write hashes/signatures) */ + fd = open(fname, O_RDWR | O_BINARY); + + if (fd < 0) { + fprintf(stderr, "%s: Can't open %s: %s\n", + params->cmdname, fname, strerror(errno)); + unlink(fname); + return -1; + } + + if (fstat(fd, sbuf) < 0) { + fprintf(stderr, "%s: Can't stat %s: %s\n", + params->cmdname, fname, strerror(errno)); + unlink(fname); + return -1; + } + + ptr = mmap(0, sbuf->st_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); + if (ptr == MAP_FAILED) { + fprintf(stderr, "%s: Can't read %s: %s\n", + params->cmdname, fname, strerror(errno)); + unlink(fname); + return -1; + } + + /* check if ptr has a valid blob */ + if (fdt_check_header(ptr)) { + fprintf(stderr, "%s: Invalid FIT blob\n", params->cmdname); + unlink(fname); + return -1; + } + + *blobp = ptr; + return fd; +} + /** * fit_handle_file - main FIT file processing function * @@ -65,7 +107,7 @@ static int fit_handle_file (struct mkimage_params *params) char cmd[MKIMAGE_MAX_DTC_CMDLINE_LEN]; int tfd; struct stat sbuf; - unsigned char *ptr; + void *ptr; /* Flattened Image Tree (FIT) format handling */ debug ("FIT format handling\n"); @@ -87,57 +129,25 @@ static int fit_handle_file (struct mkimage_params *params) if (system (cmd) == -1) { fprintf (stderr, "%s: system(%s) failed: %s\n", params->cmdname, cmd, strerror(errno)); - unlink (tmpfile); - return (EXIT_FAILURE); - } - - /* load FIT blob into memory */ - tfd = open (tmpfile, O_RDWR|O_BINARY); - - if (tfd < 0) { - fprintf (stderr, "%s: Can't open %s: %s\n", - params->cmdname, tmpfile, strerror(errno)); - unlink (tmpfile); - return (EXIT_FAILURE); - } - - if (fstat (tfd, &sbuf) < 0) { - fprintf (stderr, "%s: Can't stat %s: %s\n", - params->cmdname, tmpfile, strerror(errno)); - unlink (tmpfile); - return (EXIT_FAILURE); - } - - ptr = mmap (0, sbuf.st_size, PROT_READ|PROT_WRITE, MAP_SHARED, - tfd, 0); - if (ptr == MAP_FAILED) { - fprintf (stderr, "%s: Can't read %s: %s\n", - params->cmdname, tmpfile, strerror(errno)); - unlink (tmpfile); - return (EXIT_FAILURE); + goto err_system; } - /* check if ptr has a valid blob */ - if (fdt_check_header (ptr)) { - fprintf (stderr, "%s: Invalid FIT blob\n", params->cmdname); - unlink (tmpfile); - return (EXIT_FAILURE); - } + tfd = mmap_fdt(params, tmpfile, &ptr, &sbuf); + if (tfd < 0) + goto err_mmap; /* set hashes for images in the blob */ - if (fit_set_hashes (ptr)) { + if (fit_add_verification_data(ptr)) { fprintf (stderr, "%s Can't add hashes to FIT blob", params->cmdname); - unlink (tmpfile); - return (EXIT_FAILURE); + goto err_add_hashes; } /* add a timestamp at offset 0 i.e., root */ if (fit_set_timestamp (ptr, 0, sbuf.st_mtime)) { fprintf (stderr, "%s: Can't add image timestamp\n", params->cmdname); - unlink (tmpfile); - return (EXIT_FAILURE); + goto err_add_timestamp; } debug ("Added timestamp successfully\n"); @@ -153,6 +163,14 @@ static int fit_handle_file (struct mkimage_params *params) return (EXIT_FAILURE); } return (EXIT_SUCCESS); + +err_add_timestamp: +err_add_hashes: + munmap(ptr, sbuf.st_size); +err_mmap: +err_system: + unlink(tmpfile); + return -1; } static int fit_check_params (struct mkimage_params *params) diff --git a/tools/image-host.c b/tools/image-host.c new file mode 100644 index 0000000..d944d0f --- /dev/null +++ b/tools/image-host.c @@ -0,0 +1,208 @@ +/* + * Copyright (c) 2013, Google Inc. + * + * (C) Copyright 2008 Semihalf + * + * (C) Copyright 2000-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "mkimage.h" +#include <bootstage.h> +#include <image.h> +#include <sha1.h> +#include <time.h> +#include <u-boot/crc.h> +#include <u-boot/md5.h> + +/** + * fit_set_hash_value - set hash value in requested has node + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @value: hash value to be set + * @value_len: hash value length + * + * fit_set_hash_value() attempts to set hash value in a node at offset + * given and returns operation status to the caller. + * + * returns + * 0, on success + * -1, on failure + */ +static int fit_set_hash_value(void *fit, int noffset, uint8_t *value, + int value_len) +{ + int ret; + + ret = fdt_setprop(fit, noffset, FIT_VALUE_PROP, value, value_len); + if (ret) { + printf("Can't set hash '%s' property for '%s' node(%s)\n", + FIT_VALUE_PROP, fit_get_name(fit, noffset, NULL), + fdt_strerror(ret)); + return -1; + } + + return 0; +} + +/** + * fit_image_process_hash - Process a single subnode of the images/ node + * + * Check each subnode and process accordingly. For hash nodes we generate + * a hash of the supplised data and store it in the node. + * + * @fit: pointer to the FIT format image header + * @image_name: name of image being processes (used to display errors) + * @noffset: subnode offset + * @data: data to process + * @size: size of data in bytes + * @return 0 if ok, -1 on error + */ +static int fit_image_process_hash(void *fit, const char *image_name, + int noffset, const void *data, size_t size) +{ + uint8_t value[FIT_MAX_HASH_LEN]; + const char *node_name; + int value_len; + char *algo; + + node_name = fit_get_name(fit, noffset, NULL); + + if (fit_image_hash_get_algo(fit, noffset, &algo)) { + printf("Can't get hash algo property for '%s' hash node in '%s' image node\n", + node_name, image_name); + return -1; + } + + if (calculate_hash(data, size, algo, value, &value_len)) { + printf("Unsupported hash algorithm (%s) for '%s' hash node in '%s' image node\n", + algo, node_name, image_name); + return -1; + } + + if (fit_set_hash_value(fit, noffset, value, value_len)) { + printf("Can't set hash value for '%s' hash node in '%s' image node\n", + node_name, image_name); + return -1; + } + + return 0; +} + +/** + * fit_image_add_verification_data() - calculate/set hash data for image node + * + * This adds hash values for a component image node. + * + * All existing hash subnodes are checked, if algorithm property is set to + * one of the supported hash algorithms, hash value is computed and + * corresponding hash node property is set, for example: + * + * Input component image node structure: + * + * o image@1 (at image_noffset) + * | - data = [binary data] + * o hash@1 + * |- algo = "sha1" + * + * Output component image node structure: + * + * o image@1 (at image_noffset) + * | - data = [binary data] + * o hash@1 + * |- algo = "sha1" + * |- value = sha1(data) + * + * For signature details, please see doc/uImage.FIT/signature.txt + * + * @fit: Pointer to the FIT format image header + * @image_noffset: Requested component image node + * @return: 0 on success, <0 on failure + */ +int fit_image_add_verification_data(void *fit, int image_noffset) +{ + const char *image_name; + const void *data; + size_t size; + int noffset; + + /* Get image data and data length */ + if (fit_image_get_data(fit, image_noffset, &data, &size)) { + printf("Can't get image data/size\n"); + return -1; + } + + image_name = fit_get_name(fit, image_noffset, NULL); + + /* Process all hash subnodes of the component image node */ + for (noffset = fdt_first_subnode(fit, image_noffset); + noffset >= 0; + noffset = fdt_next_subnode(fit, noffset)) { + const char *node_name; + int ret = 0; + + /* + * Check subnode name, must be equal to "hash" or "signature". + * Multiple hash nodes require unique unit node + * names, e.g. hash@1, hash@2, signature@1, etc. + */ + node_name = fit_get_name(fit, noffset, NULL); + if (!strncmp(node_name, FIT_HASH_NODENAME, + strlen(FIT_HASH_NODENAME))) { + ret = fit_image_process_hash(fit, image_name, noffset, + data, size); + } + if (ret) + return -1; + } + + return 0; +} + +int fit_add_verification_data(void *fit) +{ + int images_noffset; + int noffset; + int ret; + + /* Find images parent node offset */ + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (images_noffset < 0) { + printf("Can't find images parent node '%s' (%s)\n", + FIT_IMAGES_PATH, fdt_strerror(images_noffset)); + return images_noffset; + } + + /* Process its subnodes, print out component images details */ + for (noffset = fdt_first_subnode(fit, images_noffset); + noffset >= 0; + noffset = fdt_next_subnode(fit, noffset)) { + /* + * Direct child node of the images parent node, + * i.e. component image node. + */ + ret = fit_image_add_verification_data(fit, noffset); + if (ret) + return ret; + } + + return 0; +} diff --git a/tools/mkimage.h b/tools/mkimage.h index ea45f5c..e07a615 100644 --- a/tools/mkimage.h +++ b/tools/mkimage.h @@ -42,6 +42,8 @@ #define debug(fmt,args...) #endif /* MKIMAGE_DEBUG */ +#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) + #define MKIMAGE_TMPFILE_SUFFIX ".tmp" #define MKIMAGE_MAX_TMPFILE_LEN 256 #define MKIMAGE_DEFAULT_DTC_OPTIONS "-I dts -O dtb -p 500" diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index e31da15..b7f6739 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -56,10 +56,14 @@ def GetUpstream(git_dir, branch): Returns: Name of upstream branch (e.g. 'upstream/master') or None if none """ - remote = command.OutputOneLine('git', '--git-dir', git_dir, 'config', - 'branch.%s.remote' % branch) - merge = command.OutputOneLine('git', '--git-dir', git_dir, 'config', - 'branch.%s.merge' % branch) + try: + remote = command.OutputOneLine('git', '--git-dir', git_dir, 'config', + 'branch.%s.remote' % branch) + merge = command.OutputOneLine('git', '--git-dir', git_dir, 'config', + 'branch.%s.merge' % branch) + except: + return None + if remote == '.': return merge elif remote and merge: @@ -78,9 +82,11 @@ def GetRangeInBranch(git_dir, branch, include_upstream=False): branch: Name of branch Return: Expression in the form 'upstream..branch' which can be used to - access the commits. + access the commits. If the branch does not exist, returns None. """ upstream = GetUpstream(git_dir, branch) + if not upstream: + return None return '%s%s..%s' % (upstream, '~' if include_upstream else '', branch) def CountCommitsInBranch(git_dir, branch, include_upstream=False): @@ -90,9 +96,12 @@ def CountCommitsInBranch(git_dir, branch, include_upstream=False): git_dir: Directory containing git repo branch: Name of branch Return: - Number of patches that exist on top of the branch + Number of patches that exist on top of the branch, or None if the + branch does not exist. """ range_expr = GetRangeInBranch(git_dir, branch, include_upstream) + if not range_expr: + return None pipe = [['git', '--git-dir', git_dir, 'log', '--oneline', '--no-decorate', range_expr], ['wc', '-l']] diff --git a/tools/patman/patman.py b/tools/patman/patman.py index a8061a9..7a317c5 100755 --- a/tools/patman/patman.py +++ b/tools/patman/patman.py @@ -1,4 +1,4 @@ -#!/usr/bin/python +#!/usr/bin/env python # # Copyright (c) 2011 The Chromium OS Authors. # diff --git a/tools/patman/series.py b/tools/patman/series.py index 783b3dd..85ed316 100644 --- a/tools/patman/series.py +++ b/tools/patman/series.py @@ -40,6 +40,7 @@ class Series(dict): notes: List of lines in the notes changes: (dict) List of changes for each version, The key is the integer version number + allow_overwrite: Allow tags to overwrite an existing tag """ def __init__(self): self.cc = [] @@ -49,6 +50,7 @@ class Series(dict): self.cover = None self.notes = [] self.changes = {} + self.allow_overwrite = False # Written in MakeCcFile() # key: name of patch file @@ -72,7 +74,7 @@ class Series(dict): """ # If we already have it, then add to our list name = name.replace('-', '_') - if name in self: + if name in self and not self.allow_overwrite: values = value.split(',') values = [str.strip() for str in values] if type(self[name]) != type([]): |