diff options
| -rw-r--r-- | MAINTAINERS | 4 | ||||
| -rwxr-xr-x | MAKEALL | 1 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-armv7/sysctrl.h | 70 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-armv7/systimer.h | 50 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-armv7/wdt.h | 55 | ||||
| -rw-r--r-- | board/armltd/vexpress/Makefile | 49 | ||||
| -rw-r--r-- | board/armltd/vexpress/ca9x4_ct_vxp.c | 220 | ||||
| -rw-r--r-- | board/armltd/vexpress/config.mk | 23 | ||||
| -rw-r--r-- | board/armltd/vexpress/u-boot.lds | 65 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | include/configs/ca9x4_ct_vxp.h | 196 |
11 files changed, 734 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 785fccf..a394ac9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -800,6 +800,10 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com> SFFSDR ARM926EJS +Matt Waddel <matt.waddel@linaro.org> + + ca9x4_ct_vxp ARM ARMV7 (Quad Core) + Prafulla Wadaskar <prafulla@marvell.com> mv88f6281gtw_ge ARM926EJS (Kirkwood SoC) @@ -489,6 +489,7 @@ LIST_ARM11=" \ ######################################################################### LIST_ARMV7=" \ am3517_evm \ + ca9x4_ct_vxp \ devkit8000 \ mx51evk \ omap3_beagle \ diff --git a/arch/arm/include/asm/arch-armv7/sysctrl.h b/arch/arm/include/asm/arch-armv7/sysctrl.h new file mode 100644 index 0000000..4e45167 --- /dev/null +++ b/arch/arm/include/asm/arch-armv7/sysctrl.h @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2010 Linaro + * Matt Waddel, <matt.waddel@linaro.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _SYSCTRL_H_ +#define _SYSCTRL_H_ + +/* System controller (SP810) register definitions */ +#define SP810_TIMER0_ENSEL (1 << 15) +#define SP810_TIMER1_ENSEL (1 << 17) +#define SP810_TIMER2_ENSEL (1 << 19) +#define SP810_TIMER3_ENSEL (1 << 21) + +struct sysctrl { + u32 scctrl; /* 0x000 */ + u32 scsysstat; + u32 scimctrl; + u32 scimstat; + u32 scxtalctrl; + u32 scpllctrl; + u32 scpllfctrl; + u32 scperctrl0; + u32 scperctrl1; + u32 scperen; + u32 scperdis; + u32 scperclken; + u32 scperstat; + u32 res1[0x006]; + u32 scflashctrl; /* 0x04c */ + u32 res2[0x3a4]; + u32 scsysid0; /* 0xee0 */ + u32 scsysid1; + u32 scsysid2; + u32 scsysid3; + u32 scitcr; + u32 scitir0; + u32 scitir1; + u32 scitor; + u32 sccntctrl; + u32 sccntdata; + u32 sccntstep; + u32 res3[0x32]; + u32 scperiphid0; /* 0xfe0 */ + u32 scperiphid1; + u32 scperiphid2; + u32 scperiphid3; + u32 scpcellid0; + u32 scpcellid1; + u32 scpcellid2; + u32 scpcellid3; +}; +#endif /* _SYSCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-armv7/systimer.h b/arch/arm/include/asm/arch-armv7/systimer.h new file mode 100644 index 0000000..e745e37 --- /dev/null +++ b/arch/arm/include/asm/arch-armv7/systimer.h @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2010 Linaro + * Matt Waddel, <matt.waddel@linaro.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _SYSTIMER_H_ +#define _SYSTIMER_H_ + +/* AMBA timer register base address */ +#define SYSTIMER_BASE 0x10011000 + +#define SYSHZ_CLOCK 1000000 /* Timers -> 1Mhz */ +#define SYSTIMER_RELOAD 0xFFFFFFFF +#define SYSTIMER_EN (1 << 7) +#define SYSTIMER_32BIT (1 << 1) + +struct systimer { + u32 timer0load; /* 0x00 */ + u32 timer0value; + u32 timer0control; + u32 timer0intclr; + u32 timer0ris; + u32 timer0mis; + u32 timer0bgload; + u32 timer1load; /* 0x20 */ + u32 timer1value; + u32 timer1control; + u32 timer1intclr; + u32 timer1ris; + u32 timer1mis; + u32 timer1bgload; +}; +#endif /* _SYSTIMER_H_ */ diff --git a/arch/arm/include/asm/arch-armv7/wdt.h b/arch/arm/include/asm/arch-armv7/wdt.h new file mode 100644 index 0000000..ee74c38 --- /dev/null +++ b/arch/arm/include/asm/arch-armv7/wdt.h @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2010 + * Matt Waddel, <matt.waddel@linaro.org> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _WDT_H_ +#define _WDT_H_ + +/* Watchdog timer (SP805) register base address */ +#define WDT_BASE 0x100E5000 + +#define WDT_EN 0x2 +#define WDT_RESET_LOAD 0x0 + +struct wdt { + u32 wdogload; /* 0x000 */ + u32 wdogvalue; + u32 wdogcontrol; + u32 wdogintclr; + u32 wdogris; + u32 wdogmis; + u32 res1[0x2F9]; + u32 wdoglock; /* 0xC00 */ + u32 res2[0xBE]; + u32 wdogitcr; /* 0xF00 */ + u32 wdogitop; + u32 res3[0x35]; + u32 wdogperiphid0; /* 0xFE0 */ + u32 wdogperiphid1; + u32 wdogperiphid2; + u32 wdogperiphid3; + u32 wdogpcellid0; + u32 wdogpcellid1; + u32 wdogpcellid2; + u32 wdogpcellid3; +}; + +#endif /* _WDT_H_ */ diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile new file mode 100644 index 0000000..ee5c0d8 --- /dev/null +++ b/board/armltd/vexpress/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := ca9x4_ct_vxp.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/ca9x4_ct_vxp.c new file mode 100644 index 0000000..48dfc8c --- /dev/null +++ b/board/armltd/vexpress/ca9x4_ct_vxp.c @@ -0,0 +1,220 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> + * + * (C) Copyright 2003 + * Texas Instruments, <www.ti.com> + * Kshitij Gupta <Kshitij@ti.com> + * + * (C) Copyright 2004 + * ARM Ltd. + * Philippe Robin, <philippe.robin@arm.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/systimer.h> +#include <asm/arch/sysctrl.h> +#include <asm/arch/wdt.h> + +static ulong timestamp; +static ulong lastdec; + +static struct wdt *wdt_base = (struct wdt *)WDT_BASE; +static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE; +static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE; + +static void flash__init(void); +static void vexpress_timer_init(void); +DECLARE_GLOBAL_DATA_PTR; + +#if defined(CONFIG_SHOW_BOOT_PROGRESS) +void show_boot_progress(int progress) +{ + printf("Boot reached stage %d\n", progress); +} +#endif + +static inline void delay(ulong loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b" : "=r" (loops) : "0" (loops)); +} + +int board_init(void) +{ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + gd->bd->bi_arch_number = MACH_TYPE_VEXPRESS; + gd->flags = 0; + + icache_enable(); + flash__init(); + vexpress_timer_init(); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; +#ifdef CONFIG_SMC911X + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); +#endif + return rc; +} + +static void flash__init(void) +{ + /* Setup the sytem control register to allow writing to flash */ + writel(readl(&sysctrl_base->scflashctrl) | VEXPRESS_FLASHPROG_FLVPPEN, + &sysctrl_base->scflashctrl); +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, PHYS_SDRAM_1_SIZE); + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size(PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); +} + +int timer_init(void) +{ + return 0; +} + +/* + * Start timer: + * Setup a 32 bit timer, running at 1KHz + * Versatile Express Motherboard provides 1 MHz timer + */ +static void vexpress_timer_init(void) +{ + /* + * Set clock frequency in system controller: + * VEXPRESS_REFCLK is 32KHz + * VEXPRESS_TIMCLK is 1MHz + */ + writel(SP810_TIMER0_ENSEL | SP810_TIMER1_ENSEL | + SP810_TIMER2_ENSEL | SP810_TIMER3_ENSEL | + readl(&sysctrl_base->scctrl), &sysctrl_base->scctrl); + + /* + * Set Timer0 to be: + * Enabled, free running, no interrupt, 32-bit, wrapping + */ + writel(SYSTIMER_RELOAD, &systimer_base->timer0load); + writel(SYSTIMER_RELOAD, &systimer_base->timer0value); + writel(SYSTIMER_EN | SYSTIMER_32BIT | \ + readl(&systimer_base->timer0control), \ + &systimer_base->timer0control); + + reset_timer_masked(); +} + +/* Use the ARM Watchdog System to cause reset */ +void reset_cpu(ulong addr) +{ + writeb(WDT_EN, &wdt_base->wdogcontrol); + writel(WDT_RESET_LOAD, &wdt_base->wdogload); + while (1) + ; +} + +/* + * Delay x useconds AND perserve advance timstamp value + * assumes timer is ticking at 1 msec + */ +void udelay(ulong usec) +{ + ulong tmo, tmp; + + tmo = usec / 1000; + tmp = get_timer(0); /* get current timestamp */ + + /* + * If setting this forward will roll time stamp then + * reset "advancing" timestamp to 0 and set lastdec value + * otherwise set the advancing stamp to the wake up time + */ + if ((tmo + tmp + 1) < tmp) + reset_timer_masked(); + else + tmo += tmp; + + while (get_timer_masked() < tmo) + ; /* loop till wakeup event */ +} + +ulong get_timer(ulong base) +{ + return get_timer_masked() - base; +} + +void reset_timer_masked(void) +{ + lastdec = readl(&systimer_base->timer0value) / 1000; + timestamp = 0; +} + +void reset_timer(void) +{ + reset_timer_masked(); +} + +ulong get_timer_masked(void) +{ + ulong now = readl(&systimer_base->timer0value) / 1000; + + if (lastdec >= now) { /* normal mode (non roll) */ + timestamp += lastdec - now; + } else { /* count down timer overflowed */ + /* + * nts = ts + ld - now + * ts = old stamp, ld = time before passing through - 1 + * now = amount of time after passing though - 1 + * nts = new "advancing time stamp" + */ + timestamp += lastdec + SYSTIMER_RELOAD - now; + } + lastdec = now; + + return timestamp; +} + +void lowlevel_init(void) +{ +} + +ulong get_board_rev(void){ + return readl((u32 *)SYS_ID); +} diff --git a/board/armltd/vexpress/config.mk b/board/armltd/vexpress/config.mk new file mode 100644 index 0000000..2d797d7 --- /dev/null +++ b/board/armltd/vexpress/config.mk @@ -0,0 +1,23 @@ +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Linux-Kernel is expected to be at 0x60008000 +# +TEXT_BASE = 0x60800000 +LDSCRIPT := $(SRCTREE)/board/armltd/vexpress/u-boot.lds diff --git a/board/armltd/vexpress/u-boot.lds b/board/armltd/vexpress/u-boot.lds new file mode 100644 index 0000000..5ac62f2 --- /dev/null +++ b/board/armltd/vexpress/u-boot.lds @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + . = ALIGN(4); + .text : + { + arch/arm/cpu/armv7/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata))) } + + . = ALIGN(4); + .data : { *(.data) + __datarel_start = .; + *(.data.rel) + __datarelrolocal_start = .; + *(.data.rel.ro.local) + __datarellocal_start = .; + *(.data.rel.local) + __datarelro_start = .; + *(.data.rel.ro) + } + + __got_start = .; + . = ALIGN(4); + .got : { *(.got) } + __got_end = .; + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} @@ -252,6 +252,7 @@ imx27lite arm arm926ejs imx27lite logicpd mx27 magnesium arm arm926ejs imx27lite logicpd mx27 omap5912osk arm arm926ejs - ti omap edminiv2 arm arm926ejs - LaCie orion5x +ca9x4_ct_vxp arm armv7 vexpress armltd omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h new file mode 100644 index 0000000..5547d55 --- /dev/null +++ b/include/configs/ca9x4_ct_vxp.h @@ -0,0 +1,196 @@ +/* + * (C) Copyright 2010 Linaro + * Matt Waddel, <matt.waddel@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Board info register */ +#define SYS_ID 0x10000000 +#define CONFIG_REVISION_TAG 1 + +/* High Level Configuration Options */ +#define CONFIG_ARMV7 1 + +#define CONFIG_SYS_MEMTEST_START 0x60000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_L2_OFF 1 +#define CONFIG_INITRD_TAG 1 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define SCTL_BASE 0x10001000 +#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) + +/* SMSC9115 Ethernet from SMSC9118 family */ +#define CONFIG_NET_MULTI +#define CONFIG_SMC911X 1 +#define CONFIG_SMC911X_32_BIT 1 +#define CONFIG_SMC911X_BASE 0x4E000000 + +/* PL011 Serial Configuration */ +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK 24000000 +#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ + (void *)CONFIG_SYS_SERIAL1} +#define CONFIG_CONS_INDEX 0 + +#define CONFIG_BAUDRATE 38400 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_SERIAL0 0x10009000 +#define CONFIG_SYS_SERIAL1 0x1000A000 + +/* Command line configuration */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_IMI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVEENV +#define CONFIG_NET_MULTI +#define CONFIG_CMD_RUN + +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_MMC 1 +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Miscellaneous configurable options */ +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */ +#define LINUX_BOOT_PARAM_ADDR 0x60000200 +#define CONFIG_BOOTDELAY 2 + +/* Stack sizes are set up in start.S using the settings below */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ +#endif + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ +#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */ + +/* additions for new relocation code */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_END 0x1000 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \ + CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET + +/* Basic environment settings */ +#define CONFIG_BOOTCOMMAND "run bootflash;" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80008000\0" \ + "initrd=0x61000000\0" \ + "kerneladdr=0x44100000\0" \ + "initrdaddr=0x44800000\0" \ + "maxinitrd=0x1800000\0" \ + "console=ttyAMA0,38400n8\0" \ + "dram=1024M\0" \ + "root=/dev/sda1 rw\0" \ + "mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \ + "24M@0x2000000(initrd)\0" \ + "flashargs=setenv bootargs root=${root} console=${console} " \ + "mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \ + "devtmpfs.mount=0 vmalloc=256M\0" \ + "bootflash=run flashargs; " \ + "cp ${initrdaddr} ${initrd} ${maxinitrd}; " \ + "bootm ${kerneladdr} ${initrd}\0" + +/* FLASH and environment organization */ +#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define CONFIG_SYS_FLASH_SIZE 0x04000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_BASE0 0x40000000 +#define CONFIG_SYS_FLASH_BASE1 0x44000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 + +/* Timeout values in ticks */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */ + +/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */ +#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */ +#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */ + +/* Room required on the stack for the environment data */ +#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE + +/* + * Amount of flash used for environment: + * We don't know which end has the small erase blocks so we use the penultimate + * sector location for the environment + */ +#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE +#define CONFIG_ENV_OVERWRITE 1 + +/* Store environment at top of flash */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \ + (2 * CONFIG_ENV_SECT_SIZE)) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \ + CONFIG_ENV_OFFSET) +#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \ + CONFIG_SYS_FLASH_BASE1 } + +/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PROMPT "VExpress# " +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ +#define CONFIG_CMD_SOURCE +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SYS_MAXARGS 16 /* max command args */ + +#endif |