summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS20
-rwxr-xr-xMAKEALL1
-rw-r--r--Makefile15
-rw-r--r--README6
-rw-r--r--board/amcc/canyonlands/canyonlands.c6
-rw-r--r--board/bf537-stamp/Makefile1
-rw-r--r--board/bf537-stamp/nand.c100
-rw-r--r--board/davinci/sonata/sonata.c28
-rw-r--r--board/espt/Makefile50
-rw-r--r--board/espt/config.mk9
-rw-r--r--board/espt/espt.c50
-rw-r--r--board/espt/lowlevel_init.S334
-rw-r--r--board/ms7720se/u-boot.lds108
-rw-r--r--board/ms7722se/u-boot.lds105
-rw-r--r--board/ms7750se/u-boot.lds105
-rw-r--r--board/renesas/MigoR/u-boot.lds105
-rw-r--r--board/renesas/ap325rxa/u-boot.lds105
-rw-r--r--board/renesas/r2dplus/u-boot.lds105
-rw-r--r--board/renesas/r7780mp/u-boot.lds105
-rw-r--r--board/renesas/sh7763rdp/u-boot.lds105
-rw-r--r--board/renesas/sh7785lcr/Makefile2
-rw-r--r--board/renesas/sh7785lcr/lowlevel_init.S58
-rw-r--r--board/renesas/sh7785lcr/u-boot_29bit96
-rw-r--r--board/renesas/sh7785lcr/u-boot_32bit96
-rw-r--r--common/cmd_nand.c31
-rw-r--r--common/cmd_onenand.c35
-rw-r--r--common/cmd_ubi.c21
-rw-r--r--common/cmd_ubifs.c26
-rw-r--r--common/env_nand.c51
-rw-r--r--common/env_onenand.c2
-rw-r--r--cpu/mpc83xx/cpu_init.c4
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c42
-rw-r--r--cpu/ppc4xx/4xx_pci.c44
-rw-r--r--cpu/ppc4xx/cpu.c2
-rw-r--r--cpu/ppc4xx/cpu_init.c5
-rw-r--r--cpu/ppc4xx/start.S1
-rw-r--r--cpu/ppc4xx/uic.c2
-rw-r--r--cpu/sh2/u-boot.lds (renamed from board/renesas/rsk7203/u-boot.lds)10
-rw-r--r--cpu/sh3/u-boot.lds (renamed from board/mpr2/u-boot.lds)13
-rw-r--r--cpu/sh4/u-boot.lds (renamed from board/renesas/sh7785lcr/u-boot.lds)15
-rw-r--r--doc/README.nand9
-rw-r--r--drivers/mtd/cfi_flash.c11
-rw-r--r--drivers/mtd/nand/Makefile3
-rw-r--r--drivers/mtd/nand/davinci_nand.c289
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c4
-rw-r--r--drivers/mtd/nand/nand_plat.c53
-rw-r--r--drivers/mtd/nand/nand_util.c20
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-fsl.c18
-rw-r--r--drivers/usb/host/ehci-hcd.c4
-rw-r--r--drivers/usb/host/ehci-kirkwood.c108
-rw-r--r--drivers/usb/musb/musb_core.h6
-rw-r--r--drivers/usb/musb/musb_hcd.c31
-rw-r--r--drivers/usb/musb/musb_hcd.h4
-rw-r--r--include/asm-arm/arch-davinci/nand_defs.h130
-rw-r--r--include/asm-sh/clk.h35
-rw-r--r--include/asm-sh/macro.h2
-rw-r--r--include/common.h6
-rw-r--r--include/configs/MigoR.h4
-rw-r--r--include/configs/ap325rxa.h4
-rw-r--r--include/configs/bf537-stamp.h44
-rw-r--r--include/configs/bfin_adi_common.h3
-rw-r--r--include/configs/blackstamp.h9
-rw-r--r--include/configs/canyonlands.h2
-rw-r--r--include/configs/cm-bf561.h5
-rw-r--r--include/configs/espt.h126
-rw-r--r--include/configs/mpr2.h4
-rw-r--r--include/configs/ms7720se.h4
-rw-r--r--include/configs/ms7722se.h4
-rw-r--r--include/configs/ms7750se.h4
-rw-r--r--include/configs/r2dplus.h4
-rw-r--r--include/configs/r7780mp.h7
-rw-r--r--include/configs/sh7763rdp.h4
-rw-r--r--include/configs/sh7785lcr.h4
-rw-r--r--include/configs/smdk6400.h3
-rw-r--r--include/nand.h14
-rw-r--r--include/usb/ehci-fsl.h2
-rw-r--r--lib_blackfin/Makefile1
-rw-r--r--lib_blackfin/cmd_cache_dump.c145
-rw-r--r--lib_sh/time.c55
-rw-r--r--nand_spl/nand_boot.c28
-rw-r--r--sh_config.mk3
82 files changed, 1436 insertions, 1800 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 6fc2901..376a0a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -587,6 +587,10 @@ Prakash Kumar <prakash@embedx.com>
cerf250 xscale
+Sergey Lapin <slapin@ossfans.org>
+
+ afeb9260 ARM926EJS (AT91SAM9260 SoC)
+
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
imx31_phycore_eet i.MX31
@@ -686,10 +690,6 @@ Alex Züpke <azu@sysgo.de>
lart SA1100
dnp1110 SA1110
-Sergey Lapin <slapin@ossfans.org>
-
- afeb9260 ARM926EJS (AT91SAM9260 SoC)
-
-------------------------------------------------------------------------
Unknown / orphaned boards:
@@ -786,14 +786,14 @@ Michal Simek <monstr@monstr.eu>
# Board CPU #
#########################################################################
-Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-
- TASREG MCF5249
-
Hayden Fraser <Hayden.Fraser@freescale.com>
M5253EVBE mcf52x2
+Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+
+ TASREG MCF5249
+
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
M52277EVB mcf5227x
@@ -866,10 +866,6 @@ Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
MS7720SE SH7720
R0P77850011RL SH7785
-Yusuke Goda <goda.yusuke@renesas.com>
-
- MIGO-R SH7722
-
#########################################################################
# Blackfin Systems: #
# #
diff --git a/MAKEALL b/MAKEALL
index 3c15f9c..4163080 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -850,6 +850,7 @@ LIST_sh4=" \
sh7763rdp \
sh7785lcr \
ap325rxa \
+ espt \
"
LIST_sh=" \
diff --git a/Makefile b/Makefile
index 3e71a08..015368c 100644
--- a/Makefile
+++ b/Makefile
@@ -3564,18 +3564,14 @@ sh7763rdp_config : unconfig
xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1))
sh7785lcr_32bit_config \
sh7785lcr_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_SH7785LCR 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/renesas/sh7785lcr
+ @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
@if [ "$(findstring 32bit, $@)" ] ; then \
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
- cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \
- $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
echo "TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
$(XECHO) " ... enable 32-Bit Address Extended Mode" ; \
- else \
- cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \
- $(obj)board/renesas/sh7785lcr/u-boot.lds ; \
fi
@$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas
@@ -3584,6 +3580,11 @@ ap325rxa_config : unconfig
@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas
+espt_config : unconfig
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+
#========================================================================
# SPARC
#========================================================================
diff --git a/README b/README
index 0e84337..de700bd 100644
--- a/README
+++ b/README
@@ -2428,6 +2428,12 @@ to save the current settings.
to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
the NAND devices block size.
+- CONFIG_NAND_ENV_DST
+
+ Defines address in RAM to which the nand_spl code should copy the
+ environment. If redundant environment is used, it will be copied to
+ CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
+
- CONFIG_SYS_SPI_INIT_OFFSET
Defines offset to the initial SPI buffer area in DPRAM. The
diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c
index 2b74689..cfc1023 100644
--- a/board/amcc/canyonlands/canyonlands.c
+++ b/board/amcc/canyonlands/canyonlands.c
@@ -575,15 +575,17 @@ int misc_init_r(void)
#endif /* !defined(CONFIG_ARCHES) */
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+extern void __ft_board_setup(void *blob, bd_t *bd);
+
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[4];
int rc;
- ft_cpu_setup(blob, bd);
+ __ft_board_setup(blob, bd);
/* Fixup NOR mapping */
- val[0] = 0; /* chip select number */
+ val[0] = CONFIG_SYS_NOR_CS; /* chip select number */
val[1] = 0; /* always 0 */
val[2] = CONFIG_SYS_FLASH_BASE_PHYS_L; /* we fixed up this address */
val[3] = gd->bd->bi_flashsize;
diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile
index 4c9e015..f728e2c 100644
--- a/board/bf537-stamp/Makefile
+++ b/board/bf537-stamp/Makefile
@@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o cmd_bf537led.o
COBJS-$(CONFIG_BFIN_IDE) += ide-cf.o
COBJS-$(CONFIG_CMD_EEPROM) += spi_flash.o
-COBJS-$(CONFIG_CMD_NAND) += nand.o
COBJS-$(CONFIG_POST) += post.o post-memory.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c
deleted file mode 100644
index 181e83d..0000000
--- a/board/bf537-stamp/nand.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright (c) 2006-2007 Analog Devices Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-#include <nand.h>
-
-#define CONCAT(a,b,c,d) a ## b ## c ## d
-#define PORT(a,b) CONCAT(pPORT,a,b,)
-
-#ifndef CONFIG_NAND_GPIO_PORT
-#define CONFIG_NAND_GPIO_PORT F
-#endif
-
-/*
- * hardware specific access to control-lines
- */
-static void bfin_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- register struct nand_chip *this = mtd->priv;
- u32 IO_ADDR_W = (u32) this->IO_ADDR_W;
-
- if (ctrl & NAND_CTRL_CHANGE) {
- if (ctrl & NAND_CLE)
- IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_CLE;
- else
- IO_ADDR_W = CONFIG_SYS_NAND_BASE;
- if (ctrl & NAND_ALE)
- IO_ADDR_W = CONFIG_SYS_NAND_BASE + BFIN_NAND_ALE;
- else
- IO_ADDR_W = CONFIG_SYS_NAND_BASE;
- this->IO_ADDR_W = (void __iomem *) IO_ADDR_W;
- }
- this->IO_ADDR_R = this->IO_ADDR_W;
-
- /* Drain the writebuffer */
- SSYNC();
-
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, this->IO_ADDR_W);
-}
-
-int bfin_device_ready(struct mtd_info *mtd)
-{
- int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0;
- SSYNC();
- return ret;
-}
-
-/*
- * Board-specific NAND initialization. The following members of the
- * argument are board-specific (per include/linux/mtd/nand.h):
- * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device
- * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device
- * - cmd_ctrl: hardwarespecific function for accesing control-lines
- * - dev_ready: hardwarespecific function for accesing device ready/busy line
- * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must
- * only be provided if a hardware ECC is available
- * - ecc.mode: mode of ecc, see defines
- * - chip_delay: chip dependent delay for transfering data from array to
- * read regs (tR)
- * - options: various chip options. They can partly be set to inform
- * nand_scan about special functionality. See the defines for further
- * explanation
- * Members with a "?" were not set in the merged testing-NAND branch,
- * so they are not set here either.
- */
-int board_nand_init(struct nand_chip *nand)
-{
- *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY;
- *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY;
- *PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY;
-
- nand->cmd_ctrl = bfin_hwcontrol;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->dev_ready = bfin_device_ready;
- nand->chip_delay = 30;
-
- return 0;
-}
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index 7f9d9bb..817970a 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -25,6 +25,8 @@
*/
#include <common.h>
+#include <nand.h>
+#include <asm/arch/nand_defs.h>
#include <asm/arch/hardware.h>
#include "../common/misc.h"
@@ -72,3 +74,29 @@ int misc_init_r(void)
return(0);
}
+
+#ifdef CONFIG_NAND_DAVINCI
+
+/* Set WP on deselect, write enable on select */
+static void nand_sonata_select_chip(struct mtd_info *mtd, int chip)
+{
+#define GPIO_SET_DATA01 0x01c67018
+#define GPIO_CLR_DATA01 0x01c6701c
+#define GPIO_NAND_WP (1 << 4)
+#ifdef SONATA_BOARD_GPIOWP
+ if (chip < 0) {
+ REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP;
+ } else {
+ REG(GPIO_SET_DATA01) |= GPIO_NAND_WP;
+ }
+#endif
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ davinci_nand_init(nand);
+ nand->select_chip = nand_sonata_select_chip;
+ return 0;
+}
+
+#endif /* CONFIG_NAND_DAVINCI */
diff --git a/board/espt/Makefile b/board/espt/Makefile
new file mode 100644
index 0000000..c79cba8
--- /dev/null
+++ b/board/espt/Makefile
@@ -0,0 +1,50 @@
+#
+# Copyright (C) 2009 Renesas Solutions Corp.
+# Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/espt/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := espt.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/espt/config.mk b/board/espt/config.mk
new file mode 100644
index 0000000..006b432
--- /dev/null
+++ b/board/espt/config.mk
@@ -0,0 +1,9 @@
+#
+# board/espt/config.mk
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/espt/espt.c b/board/espt/espt.c
new file mode 100644
index 0000000..2930858
--- /dev/null
+++ b/board/espt/espt.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/espt/espt.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+ puts("BOARD: ESPT-GIGA\n");
+ return 0;
+}
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+ printf("DRAM: %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+ return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
diff --git a/board/espt/lowlevel_init.S b/board/espt/lowlevel_init.S
new file mode 100644
index 0000000..7d5d72e
--- /dev/null
+++ b/board/espt/lowlevel_init.S
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/espt/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+
+ write32 WDTCSR_A, WDTCSR_D
+
+ write32 WDTST_A, WDTST_D
+
+ write32 WDTBST_A, WDTBST_D
+
+ write32 CCR_A, CCR_CACHE_ICI_D
+
+ write32 MMUCR_A, MMU_CONTROL_TI_D
+
+ write32 MSTPCR0_A, MSTPCR0_D
+
+ write32 MSTPCR1_A, MSTPCR1_D
+
+ write32 RAMCR_A, RAMCR_D
+
+ /*
+ * Setting infomation from
+ * original ESPT-GIGA bootloader register
+ */
+ write32 MMSEL_A, MMSEL_D
+
+ /* dummy */
+ mov.l @r1, r2
+ mov.l @r1, r2
+ synco
+
+ write32 BCR_A, BCR_D
+
+ write32 CS0BCR_A, CS0BCR_D
+
+ write32 CS0WCR_A, CS0WCR_D
+
+ /*
+ * DDR-SDRAM setting
+ */
+
+ /* set DDR-SDRAM dummy read */
+ write32 MMSEL_A, MMSEL_D
+
+ mov.l MMSEL_A, r0
+ synco
+ mov.l @r0, r1
+ synco
+
+ mov.l CS0_A, r0
+ synco
+ mov.l @r0, r1
+ synco
+
+ /* set DDR-SDRAM bus/endian etc */
+ write32 MIM_U_A, MIM_U_D
+
+ write32 MIM_L_A, MIM_L_D0
+
+ write32 SDR_L_A, SDR_L_A_D0
+
+ write32 STR_L_A, STR_L_A_D0
+
+ /* DDR-SDRAM access control */
+ write32 MIM_L_A, MIM_L_D1
+
+ write32 SCR_L_A, SCR_L_A_D0
+
+ write32 SCR_L_A, SCR_L_A_D1
+
+ write32 EMRS_A, EMRS_D
+
+ write32 MRS1_A, MRS1_D
+
+ write32 MIM_U_A, MIM_U_D
+
+ write32 MIM_L_A, MIM_L_A_D2
+
+ write32 SCR_L_A, SCR_L_A_D2
+
+ write32 SCR_L_A, SCR_L_A_D2
+
+ write32 MRS2_A, MRS2_D
+
+ /* wait 200us */
+ wait_timer REPEAT_R3
+
+ /* GPIO setting */
+ write16 PSEL0_A, PSEL0_D
+
+ write16 PSEL1_A, PSEL1_D
+
+ write16 PSEL2_A, PSEL2_D
+
+ write16 PSEL3_A, PSEL3_D
+
+ write16 PSEL4_A, PSEL4_D
+
+ write8 PADR_A, PADR_D
+
+ write16 PACR_A, PACR_D
+
+ write8 PBDR_A, PBDR_D
+
+ write16 PBCR_A, PBCR_D
+
+ write8 PCDR_A, PCDR_D
+
+ write16 PCCR_A, PCCR_D
+
+ write8 PDDR_A, PDDR_D
+
+ write16 PDCR_A, PDCR_D
+
+ write16 PECR_A, PECR_D
+
+ write16 PFCR_A, PFCR_D
+
+ write16 PGCR_A, PGCR_D
+
+ write16 PHCR_A, PHCR_D
+
+ write16 PICR_A, PICR_D
+
+ write8 PJDR_A, PJDR_D
+
+ write16 PJCR_A, PJCR_D
+
+ /* wait 50us */
+ wait_timer REPEAT_R3
+
+ write8 PKDR_A, PKDR_D
+
+ write16 PKCR_A, PKCR_D
+
+ write16 PLCR_A, PLCR_D
+
+ write16 PMCR_A, PMCR_D
+
+ write16 PNCR_A, PNCR_D
+
+ write16 POCR_A, POCR_D
+
+
+ /* ICR0 ,ICR1 */
+ write32 ICR0_A, ICR0_D
+
+ write32 ICR1_A, ICR1_D
+
+ /* USB Host */
+ write32 USB_USBHSC_A, USB_USBHSC_D
+
+ write32 CCR_A, CCR_CACHE_D_2
+
+ rts
+ nop
+
+ .align 2
+
+/* GPIO Crontrol Register */
+PACR_A: .long 0xFFEF0000
+PBCR_A: .long 0xFFEF0002
+PCCR_A: .long 0xFFEF0004
+PDCR_A: .long 0xFFEF0006
+PECR_A: .long 0xFFEF0008
+PFCR_A: .long 0xFFEF000A
+PGCR_A: .long 0xFFEF000C
+PHCR_A: .long 0xFFEF000E
+PICR_A: .long 0xFFEF0010
+PJCR_A: .long 0xFFEF0012
+PKCR_A: .long 0xFFEF0014
+PLCR_A: .long 0xFFEF0016
+PMCR_A: .long 0xFFEF0018
+PNCR_A: .long 0xFFEF001A
+POCR_A: .long 0xFFEF001C
+
+/* GPIO Data Register */
+PADR_A: .long 0xFFEF0020
+PBDR_A: .long 0xFFEF0022
+PCDR_A: .long 0xFFEF0024
+PDDR_A: .long 0xFFEF0026
+PJDR_A: .long 0xFFEF0032
+PKDR_A: .long 0xFFEF0034
+
+/* GPIO Set data */
+PADR_D: .long 0x00000000
+PACR_D: .long 0x00001400
+PBDR_D: .long 0x00000000
+PBCR_D: .long 0x0000555A
+PCDR_D: .long 0x00000000
+PCCR_D: .long 0x00005555
+PDDR_D: .long 0x00000000
+PDCR_D: .long 0x00000155
+PECR_D: .long 0x00000000
+PFCR_D: .long 0x00000000
+PGCR_D: .long 0x00000000
+PHCR_D: .long 0x00000000
+PICR_D: .long 0x00000800
+PJDR_D: .long 0x00000006
+PJCR_D: .long 0x00005A57
+PKDR_D: .long 0x00000000
+PKCR_D: .long 0x0000FFF9
+PLCR_D: .long 0x0000C330
+PMCR_D: .long 0x0000FFFF
+PNCR_D: .long 0x00000242
+POCR_D: .long 0x00000000
+
+/* Pin Select */
+PSEL0_A: .long 0xFFEF0070
+PSEL1_A: .long 0xFFEF0072
+PSEL2_A: .long 0xFFEF0074
+PSEL3_A: .long 0xFFEF0076
+PSEL4_A: .long 0xFFEF0078
+PSEL0_D: .long 0x0001
+PSEL1_D: .long 0x2400
+PSEL2_D: .long 0x0000
+PSEL3_D: .long 0x2421
+PSEL4_D: .long 0x0000
+
+MMSEL_A: .long 0xFE600020
+BCR_A: .long 0xFF801000
+CS0BCR_A: .long 0xFF802000
+CS0WCR_A: .long 0xFF802008
+ICR0_A: .long 0xFFD00000
+ICR1_A: .long 0xFFD0001C
+
+MMSEL_D: .long 0xA5A50000
+BCR_D: .long 0x05000000
+CS0BCR_D: .long 0x232306F0
+CS0WCR_D: .long 0x00011104
+ICR0_D: .long 0x80C00000
+ICR1_D: .long 0x00020000
+
+/* RWBT Address */
+WDTST_A: .long 0xFFCC0000
+WDTCSR_A: .long 0xFFCC0004
+WDTBST_A: .long 0xFFCC0008
+/* RWBT Data */
+WDTST_D: .long 0x5A000FFF
+WDTCSR_D: .long 0xA5000000
+WDTBST_D: .long 0x55000000
+
+/* Cache Address */
+CCR_A: .long 0xFF00001C
+MMUCR_A: .long 0xFF000010
+RAMCR_A: .long 0xFF000074
+
+/* Cache Data */
+CCR_CACHE_ICI_D:.long 0x00000800
+CCR_CACHE_D_2: .long 0x00000103
+MMU_CONTROL_TI_D:.long 0x00000004
+RAMCR_D: .long 0x00000200
+
+/* Low power mode control Address */
+MSTPCR0_A: .long 0xFFC80030
+MSTPCR1_A: .long 0xFFC80038
+/* Low power mode control Data */
+MSTPCR0_D: .long 0x00000000
+MSTPCR1_D: .long 0x00000000
+
+REPEAT0_R3: .long 0x00002000
+REPEAT_R3: .long 0x00000200
+CS0_A: .long 0xA8000000
+
+MIM_U_A: .long 0xFE800008
+MIM_L_A: .long 0xFE80000C
+SCR_U_A: .long 0xFE800010
+SCR_L_A: .long 0xFE800014
+STR_U_A: .long 0xFE800018
+STR_L_A: .long 0xFE80001C
+SDR_U_A: .long 0xFE800030
+SDR_L_A: .long 0xFE800034
+EMRS_A: .long 0xFE902000
+MRS1_A: .long 0xFE900B08
+MRS2_A: .long 0xFE900308
+
+MIM_U_D: .long 0x00000000
+MIM_L_D0: .long 0x04100008
+MIM_L_D1: .long 0x02EE0009
+MIM_L_D2: .long 0x02EE0209
+
+SDR_L_A_D0: .long 0x00000300
+STR_L_A_D0: .long 0x00010040
+MIM_L_A_D1: .long 0x04100009
+SCR_L_A_D0: .long 0x00000003
+SCR_L_A_D1: .long 0x00000002
+MIM_L_A_D2: .long 0x04100209
+SCR_L_A_D2: .long 0x00000004
+
+SCR_L_NORMAL: .long 0x00000000
+SCR_L_NOP: .long 0x00000001
+SCR_L_PALL: .long 0x00000002
+SCR_L_CKE_EN: .long 0x00000003
+SCR_L_CBR: .long 0x00000004
+
+STR_L_D: .long 0x000F3980
+SDR_L_D: .long 0x00000400
+EMRS_D: .long 0x00000000
+MRS1_D: .long 0x00000000
+MRS2_D: .long 0x00000000
+
+/* USB */
+USB_USBHSC_A: .long 0xFFEC80F0
+USB_USBHSC_D: .long 0x00000000
diff --git a/board/ms7720se/u-boot.lds b/board/ms7720se/u-boot.lds
deleted file mode 100644
index 1f9b792..0000000
--- a/board/ms7720se/u-boot.lds
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh3/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/ms7722se/u-boot.lds b/board/ms7722se/u-boot.lds
deleted file mode 100644
index 7b0fb67..0000000
--- a/board/ms7722se/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss (NOLOAD) :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/ms7750se/u-boot.lds b/board/ms7750se/u-boot.lds
deleted file mode 100644
index 7b0fb67..0000000
--- a/board/ms7750se/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss (NOLOAD) :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/MigoR/u-boot.lds b/board/renesas/MigoR/u-boot.lds
deleted file mode 100644
index c004b83..0000000
--- a/board/renesas/MigoR/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/ap325rxa/u-boot.lds b/board/renesas/ap325rxa/u-boot.lds
deleted file mode 100644
index 94bacca..0000000
--- a/board/renesas/ap325rxa/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x88000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x88000000 + (128*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/r2dplus/u-boot.lds b/board/renesas/r2dplus/u-boot.lds
deleted file mode 100644
index e1c15b0..0000000
--- a/board/renesas/r2dplus/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x0C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/r7780mp/u-boot.lds b/board/renesas/r7780mp/u-boot.lds
deleted file mode 100644
index f32d0b8..0000000
--- a/board/renesas/r7780mp/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x08000000 + (128*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/sh7763rdp/u-boot.lds b/board/renesas/sh7763rdp/u-boot.lds
deleted file mode 100644
index b1a967d..0000000
--- a/board/renesas/sh7763rdp/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyrigth (c) 2007,2008
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- /*
- Base address of internal SDRAM is 0x0C000000.
- Although size of SDRAM can be either 16 or 32 MBytes,
- we assume 16 MBytes (ie ignore upper half if the full
- 32 MBytes is present).
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/sh7785lcr/Makefile b/board/renesas/sh7785lcr/Makefile
index b1b538c..b8e43f7 100644
--- a/board/renesas/sh7785lcr/Makefile
+++ b/board/renesas/sh7785lcr/Makefile
@@ -18,7 +18,7 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COBJS := sh7785lcr.o selfcheck.o rtl8169_mac.o
SOBJS := lowlevel_init.o
diff --git a/board/renesas/sh7785lcr/lowlevel_init.S b/board/renesas/sh7785lcr/lowlevel_init.S
index 97920df..7faad95 100644
--- a/board/renesas/sh7785lcr/lowlevel_init.S
+++ b/board/renesas/sh7785lcr/lowlevel_init.S
@@ -233,35 +233,6 @@ DBSC2_DBRFCNT0_D: .long 0x00010000
WAIT_200US: .long 33333
/*------- GPIO -------*/
-#define GPIO_BASE 0xffe70000
-PACR_A: .long GPIO_BASE + 0x00
-PBCR_A: .long GPIO_BASE + 0x02
-PCCR_A: .long GPIO_BASE + 0x04
-PDCR_A: .long GPIO_BASE + 0x06
-PECR_A: .long GPIO_BASE + 0x08
-PFCR_A: .long GPIO_BASE + 0x0a
-PGCR_A: .long GPIO_BASE + 0x0c
-PHCR_A: .long GPIO_BASE + 0x0e
-PJCR_A: .long GPIO_BASE + 0x10
-PKCR_A: .long GPIO_BASE + 0x12
-PLCR_A: .long GPIO_BASE + 0x14
-PMCR_A: .long GPIO_BASE + 0x16
-PNCR_A: .long GPIO_BASE + 0x18
-PPCR_A: .long GPIO_BASE + 0x1a
-PQCR_A: .long GPIO_BASE + 0x1c
-PRCR_A: .long GPIO_BASE + 0x1e
-PEPUPR_A: .long GPIO_BASE + 0x48
-PHPUPR_A: .long GPIO_BASE + 0x4e
-PJPUPR_A: .long GPIO_BASE + 0x50
-PKPUPR_A: .long GPIO_BASE + 0x52
-PLPUPR_A: .long GPIO_BASE + 0x54
-PMPUPR_A: .long GPIO_BASE + 0x56
-PNPUPR_A: .long GPIO_BASE + 0x58
-PPUPR1_A: .long GPIO_BASE + 0x60
-PPUPR2_A: .long GPIO_BASE + 0x62
-P1MSELR_A: .long GPIO_BASE + 0x80
-P2MSELR_A: .long GPIO_BASE + 0x82
-
PACR_D: .long 0x0000
PBCR_D: .long 0x0000
PCCR_D: .long 0x0000
@@ -291,6 +262,35 @@ PPUPR2_D: .long 0xff00
P1MSELR_D: .long 0x3780
P2MSELR_D: .long 0x0000
+#define GPIO_BASE 0xffe70000
+PACR_A: .long GPIO_BASE + 0x00
+PBCR_A: .long GPIO_BASE + 0x02
+PCCR_A: .long GPIO_BASE + 0x04
+PDCR_A: .long GPIO_BASE + 0x06
+PECR_A: .long GPIO_BASE + 0x08
+PFCR_A: .long GPIO_BASE + 0x0a
+PGCR_A: .long GPIO_BASE + 0x0c
+PHCR_A: .long GPIO_BASE + 0x0e
+PJCR_A: .long GPIO_BASE + 0x10
+PKCR_A: .long GPIO_BASE + 0x12
+PLCR_A: .long GPIO_BASE + 0x14
+PMCR_A: .long GPIO_BASE + 0x16
+PNCR_A: .long GPIO_BASE + 0x18
+PPCR_A: .long GPIO_BASE + 0x1a
+PQCR_A: .long GPIO_BASE + 0x1c
+PRCR_A: .long GPIO_BASE + 0x1e
+PEPUPR_A: .long GPIO_BASE + 0x48
+PHPUPR_A: .long GPIO_BASE + 0x4e
+PJPUPR_A: .long GPIO_BASE + 0x50
+PKPUPR_A: .long GPIO_BASE + 0x52
+PLPUPR_A: .long GPIO_BASE + 0x54
+PMPUPR_A: .long GPIO_BASE + 0x56
+PNPUPR_A: .long GPIO_BASE + 0x58
+PPUPR1_A: .long GPIO_BASE + 0x60
+PPUPR2_A: .long GPIO_BASE + 0x62
+P1MSELR_A: .long GPIO_BASE + 0x80
+P2MSELR_A: .long GPIO_BASE + 0x82
+
/*------- LBSC -------*/
PASCR_A: .long 0xff000070
PASCR_32BIT_MODE: .long 0x80000000 /* check booting mode */
diff --git a/board/renesas/sh7785lcr/u-boot_29bit b/board/renesas/sh7785lcr/u-boot_29bit
deleted file mode 100644
index 231769f..0000000
--- a/board/renesas/sh7785lcr/u-boot_29bit
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- . = 0x08000000 + (128 * 1024 * 1024) - (512 * 1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(.rodata)
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/board/renesas/sh7785lcr/u-boot_32bit b/board/renesas/sh7785lcr/u-boot_32bit
deleted file mode 100644
index 446fb93..0000000
--- a/board/renesas/sh7785lcr/u-boot_32bit
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyrigth (c) 2007
- * Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux")
-OUTPUT_ARCH(sh)
-ENTRY(_start)
-
-SECTIONS
-{
- . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
-
- PROVIDE (reloc_dst = .);
-
- PROVIDE (_ftext = .);
- PROVIDE (_fcode = .);
- PROVIDE (_start = .);
-
- .text :
- {
- cpu/sh4/start.o (.text)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenv)
- . = ALIGN(8192);
- common/env_embedded.o (.ppcenvr)
- . = ALIGN(8192);
- *(.text)
- . = ALIGN(4);
- } =0xFF
- PROVIDE (_ecode = .);
- .rodata :
- {
- *(.rodata)
- . = ALIGN(4);
- }
- PROVIDE (_etext = .);
-
-
- PROVIDE (_fdata = .);
- .data :
- {
- *(.data)
- . = ALIGN(4);
- }
- PROVIDE (_edata = .);
-
- PROVIDE (_fgot = .);
- .got :
- {
- *(.got)
- . = ALIGN(4);
- }
- PROVIDE (_egot = .);
-
- PROVIDE (__u_boot_cmd_start = .);
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- . = ALIGN(4);
- }
- PROVIDE (__u_boot_cmd_end = .);
-
- PROVIDE (reloc_dst_end = .);
- /* _reloc_dst_end = .; */
-
- PROVIDE (bss_start = .);
- PROVIDE (__bss_start = .);
- .bss :
- {
- *(.bss)
- . = ALIGN(4);
- }
- PROVIDE (bss_end = .);
-
- PROVIDE (_end = .);
-}
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 9451416..2f70521 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -414,18 +414,29 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
if (strcmp(cmd, "markbad") == 0) {
- addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+ argc -= 2;
+ argv += 2;
- int ret = nand->block_markbad(nand, addr);
- if (ret == 0) {
- printf("block 0x%08lx successfully marked as bad\n",
- (ulong) addr);
- return 0;
- } else {
- printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
- (ulong) addr, ret);
+ if (argc <= 0)
+ goto usage;
+
+ while (argc > 0) {
+ addr = simple_strtoul(*argv, NULL, 16);
+
+ if (nand->block_markbad(nand, addr)) {
+ printf("block 0x%08lx NOT marked "
+ "as bad! ERROR %d\n",
+ addr, ret);
+ ret = 1;
+ } else {
+ printf("block 0x%08lx successfully "
+ "marked as bad\n",
+ addr);
+ }
+ --argc;
+ ++argv;
}
- return 1;
+ return ret;
}
if (strcmp(cmd, "biterr") == 0) {
diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c
index 85bd2cb..9090940 100644
--- a/common/cmd_onenand.c
+++ b/common/cmd_onenand.c
@@ -340,7 +340,7 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
int blocksize;
ulong addr, ofs;
size_t len, retlen = 0;
- int ret;
+ int ret = 0;
char *cmd, *s;
mtd = &onenand_mtd;
@@ -434,18 +434,29 @@ int do_onenand(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
}
if (strcmp(cmd, "markbad") == 0) {
- addr = (ulong)simple_strtoul(argv[2], NULL, 16);
+ argc -= 2;
+ argv += 2;
- int ret = mtd->block_markbad(mtd, addr);
- if (ret == 0) {
- printf("block 0x%08lx successfully marked as bad\n",
- (ulong) addr);
- return 0;
- } else {
- printf("block 0x%08lx NOT marked as bad! ERROR %d\n",
- (ulong) addr, ret);
+ if (argc <= 0)
+ goto usage;
+
+ while (argc > 0) {
+ addr = simple_strtoul(*argv, NULL, 16);
+
+ if (mtd->block_markbad(mtd, addr)) {
+ printf("block 0x%08lx NOT marked "
+ "as bad! ERROR %d\n",
+ addr, ret);
+ ret = 1;
+ } else {
+ printf("block 0x%08lx successfully "
+ "marked as bad\n",
+ addr);
+ }
+ --argc;
+ ++argv;
}
- return 1;
+ return ret;
}
if (strncmp(cmd, "dump", 4) == 0) {
@@ -474,7 +485,7 @@ usage:
}
U_BOOT_CMD(
- onenand, 6, 1, do_onenand,
+ onenand, CONFIG_SYS_MAXARGS, 1, do_onenand,
"OneNAND sub-system",
"info - show available OneNAND devices\n"
"onenand bad - show bad blocks\n"
diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c
index bbca389..05893f5 100644
--- a/common/cmd_ubi.c
+++ b/common/cmd_ubi.c
@@ -395,11 +395,13 @@ static int ubi_volume_read(char *volume, char *buf, size_t size)
return err ? err : count_save - size;
}
-static int ubi_dev_scan(struct mtd_info *info, char *ubidev)
+static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
+ const char *vid_header_offset)
{
struct mtd_device *dev;
struct part_info *part;
struct mtd_partition mtd_part;
+ char ubi_mtd_param_buffer[80];
u8 pnum;
int err;
@@ -413,7 +415,11 @@ static int ubi_dev_scan(struct mtd_info *info, char *ubidev)
mtd_part.offset = part->offset;
add_mtd_partitions(info, &mtd_part, 1);
- err = ubi_mtd_param_parse(buffer, NULL);
+ strcpy(ubi_mtd_param_buffer, buffer);
+ if (vid_header_offset)
+ sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum,
+ vid_header_offset);
+ err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
if (err) {
del_mtd_partitions(info);
return err;
@@ -450,6 +456,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
char mtd_dev[16];
struct mtd_device *dev;
struct part_info *part;
+ const char *vid_header_offset = NULL;
u8 pnum;
/* Print current partition */
@@ -497,8 +504,11 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
ubi_dev.selected = 1;
+ if (argc > 3)
+ vid_header_offset = argv[3];
strcpy(ubi_dev.part_name, argv[2]);
- err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name);
+ err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
+ vid_header_offset);
if (err) {
printf("UBI init error %d\n", err);
ubi_dev.selected = 0;
@@ -594,8 +604,9 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(ubi, 6, 1, do_ubi,
"ubi commands",
- "part [part]"
- " - Show or set current partition\n"
+ "part [part] [offset]\n"
+ " - Show or set current partition (with optional VID"
+ " header offset)\n"
"ubi info [l[ayout]]"
" - Display volume and ubi layout information\n"
"ubi create[vol] volume [size] [type]"
diff --git a/common/cmd_ubifs.c b/common/cmd_ubifs.c
index d9f60d5..ed0e9db 100644
--- a/common/cmd_ubifs.c
+++ b/common/cmd_ubifs.c
@@ -47,6 +47,10 @@ int do_ubifs_mount(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
char *vol_name;
int ret;
+ if (argc != 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
vol_name = argv[1];
debug("Using volume %s\n", vol_name);
@@ -88,6 +92,7 @@ int do_ubifs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *filename;
+ char *endp;
int ret;
u32 addr;
u32 size = 0;
@@ -98,15 +103,25 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
}
if (argc < 3) {
- printf("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return -1;
}
- addr = simple_strtoul(argv[1], NULL, 16);
+ addr = simple_strtoul(argv[1], &endp, 16);
+ if (endp == argv[1]) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
filename = argv[2];
- if (argc == 4)
- size = simple_strtoul(argv[3], NULL, 16);
+ if (argc == 4) {
+ size = simple_strtoul(argv[3], &endp, 16);
+ if (endp == argv[3]) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+ }
debug("Loading file '%s' to address 0x%08x (size %d)\n", filename, addr, size);
ret = ubifs_load(filename, addr, size);
@@ -119,7 +134,8 @@ int do_ubifs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD(
ubifsmount, 2, 0, do_ubifs_mount,
"mount UBIFS volume",
- ""
+ "<volume-name>\n"
+ " - mount 'volume-name' volume"
);
U_BOOT_CMD(ubifsls, 2, 0, do_ubifs_ls,
diff --git a/common/env_nand.c b/common/env_nand.c
index 76569da..90a1c45 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -68,9 +68,11 @@ extern int default_environment_size;
char * env_name_spec = "NAND";
-#ifdef ENV_IS_EMBEDDED
+#if defined(ENV_IS_EMBEDDED)
extern uchar environment[];
env_t *env_ptr = (env_t *)(&environment[0]);
+#elif defined(CONFIG_NAND_ENV_DST)
+env_t *env_ptr = (env_t *)CONFIG_NAND_ENV_DST;
#else /* ! ENV_IS_EMBEDDED */
env_t *env_ptr = 0;
#endif /* ENV_IS_EMBEDDED */
@@ -102,26 +104,33 @@ uchar env_get_char_spec (int index)
*/
int env_init(void)
{
-#if defined(ENV_IS_EMBEDDED)
- size_t total;
+#if defined(ENV_IS_EMBEDDED) || defined(CONFIG_NAND_ENV_DST)
int crc1_ok = 0, crc2_ok = 0;
- env_t *tmp_env1, *tmp_env2;
+ env_t *tmp_env1;
- total = CONFIG_ENV_SIZE;
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ env_t *tmp_env2;
- tmp_env1 = env_ptr;
tmp_env2 = (env_t *)((ulong)env_ptr + CONFIG_ENV_SIZE);
+ crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
+#endif
+
+ tmp_env1 = env_ptr;
crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
- crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
- if (!crc1_ok && !crc2_ok)
+ if (!crc1_ok && !crc2_ok) {
+ gd->env_addr = 0;
gd->env_valid = 0;
- else if(crc1_ok && !crc2_ok)
+
+ return 0;
+ } else if (crc1_ok && !crc2_ok) {
gd->env_valid = 1;
- else if(!crc1_ok && crc2_ok)
+ }
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ else if (!crc1_ok && crc2_ok) {
gd->env_valid = 2;
- else {
+ } else {
/* both ok - check serial */
if(tmp_env1->flags == 255 && tmp_env2->flags == 0)
gd->env_valid = 2;
@@ -135,14 +144,19 @@ int env_init(void)
gd->env_valid = 1;
}
+ if (gd->env_valid == 2)
+ env_ptr = tmp_env2;
+ else
+#endif
if (gd->env_valid == 1)
env_ptr = tmp_env1;
- else if (gd->env_valid == 2)
- env_ptr = tmp_env2;
-#else /* ENV_IS_EMBEDDED */
+
+ gd->env_addr = (ulong)env_ptr->data;
+
+#else /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 1;
-#endif /* ENV_IS_EMBEDDED */
+#endif /* ENV_IS_EMBEDDED || CONFIG_NAND_ENV_DST */
return (0);
}
@@ -183,12 +197,10 @@ int writeenv(size_t offset, u_char *buf)
#ifdef CONFIG_ENV_OFFSET_REDUND
int saveenv(void)
{
- size_t total;
int ret = 0;
nand_erase_options_t nand_erase_options;
env_ptr->flags++;
- total = CONFIG_ENV_SIZE;
nand_erase_options.length = CONFIG_ENV_RANGE;
nand_erase_options.quiet = 0;
@@ -226,7 +238,6 @@ int saveenv(void)
#else /* ! CONFIG_ENV_OFFSET_REDUND */
int saveenv(void)
{
- size_t total;
int ret = 0;
nand_erase_options_t nand_erase_options;
@@ -243,7 +254,6 @@ int saveenv(void)
return 1;
puts ("Writing to Nand... ");
- total = CONFIG_ENV_SIZE;
if (writeenv(CONFIG_ENV_OFFSET, (u_char *) env_ptr)) {
puts("FAILED!\n");
return 1;
@@ -287,12 +297,9 @@ int readenv (size_t offset, u_char * buf)
void env_relocate_spec (void)
{
#if !defined(ENV_IS_EMBEDDED)
- size_t total;
int crc1_ok = 0, crc2_ok = 0;
env_t *tmp_env1, *tmp_env2;
- total = CONFIG_ENV_SIZE;
-
tmp_env1 = (env_t *) malloc(CONFIG_ENV_SIZE);
tmp_env2 = (env_t *) malloc(CONFIG_ENV_SIZE);
diff --git a/common/env_onenand.c b/common/env_onenand.c
index ed77051..48089a9 100644
--- a/common/env_onenand.c
+++ b/common/env_onenand.c
@@ -58,7 +58,7 @@ uchar env_get_char_spec(int index)
void env_relocate_spec(void)
{
- unsigned long env_addr;
+ loff_t env_addr;
int use_default = 0;
size_t retlen;
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 414565c..03b6c86 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -303,11 +303,11 @@ void cpu_init_f (volatile immap_t * im)
struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
/* Configure interface. */
- setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
+ setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
/* Wait for clock to stabilize */
do {
- temp = in_be32((void *)ehci->control);
+ temp = in_be32(&ehci->control);
udelay(1000);
} while (!(temp & PHY_CLK_VALID));
#endif
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 33788cc..2ab2336 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,6 +60,14 @@
"SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
} while (0)
+#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
+ do { \
+ u32 data; \
+ data = mfdcr(SDRAM_##mnemonic); \
+ printf("%20s[%02x] = 0x%08X\n", \
+ "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
+ } while (0)
+
#if defined(CONFIG_440)
/*
* This DDR2 setup code can dynamically setup the TLB entries for the DDR2
@@ -714,11 +722,11 @@ static void check_mem_type(unsigned long *dimm_populated,
spd_ddr_init_hang ();
break;
case 7:
- debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num);
+ debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
dimm_populated[dimm_num] = SDRAM_DDR1;
break;
case 8:
- debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
+ debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
dimm_populated[dimm_num] = SDRAM_DDR2;
break;
default:
@@ -796,7 +804,7 @@ static void check_frequency(unsigned long *dimm_populated,
else
cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
((tcyc_reg & 0x0F)*10);
- debug("cycle_time=%d [10 picoseconds]\n", cycle_time);
+ debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
if (cycle_time > (calc_cycle_time + 10)) {
/*
@@ -1407,7 +1415,7 @@ static void program_mode(unsigned long *dimm_populated,
mfsdr(SDR0_DDR0, sdr_ddrpll);
sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
- debug("sdram_freq=%d\n", sdram_freq);
+ debug("sdram_freq=%lu\n", sdram_freq);
/*------------------------------------------------------------------
* Handle the timing. We need to find the worst case timing of all
@@ -1437,7 +1445,7 @@ static void program_mode(unsigned long *dimm_populated,
/* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- debug("cas_bit[SPD byte 18]=%02x\n", cas_bit);
+ debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
/* For a particular DIMM, grab the three CAS values it supports */
for (cas_index = 0; cas_index < 3; cas_index++) {
@@ -1469,7 +1477,7 @@ static void program_mode(unsigned long *dimm_populated,
(((tcyc_reg & 0xF0) >> 4) * 100) +
((tcyc_reg & 0x0F)*10);
}
- debug("cas_index=%d: cycle_time_ns_x_100=%d\n", cas_index,
+ debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
cycle_time_ns_x_100[cas_index]);
}
@@ -1580,9 +1588,9 @@ static void program_mode(unsigned long *dimm_populated,
cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
- debug("cycle_3_0_clk=%d\n", cycle_3_0_clk);
- debug("cycle_4_0_clk=%d\n", cycle_4_0_clk);
- debug("cycle_5_0_clk=%d\n", cycle_5_0_clk);
+ debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
+ debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
+ debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
if (sdram_ddr1 == TRUE) { /* DDR1 */
if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
@@ -2797,13 +2805,13 @@ calibration_loop:
}
mfsdram(SDRAM_DLCR, val);
- debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RQDC, val);
- debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RFDC, val);
- debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
mfsdram(SDRAM_RDCC, val);
- debug("%s[%d] RDCC: 0x%08X\n", __FUNCTION__, __LINE__, val);
+ debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
}
#else /* calibration test with hardvalues */
/*-----------------------------------------------------------------------------+
@@ -3196,10 +3204,10 @@ inline void ppc4xx_ibm_ddr2_register_dump(void)
#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R0BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R1BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R2BAS);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(R3BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
+ PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
#endif /* (defined(CONFIG_440SP) || ... */
#if defined(CONFIG_405EX)
PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index 99b8e2f..4b5d636 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -87,6 +87,20 @@ DECLARE_GLOBAL_DATA_PTR;
*/
int __pci_pre_init(struct pci_controller *hose)
{
+#if defined (CONFIG_405EP)
+ /*
+ * Enable the internal PCI arbiter by default.
+ *
+ * On 405EP CPUs the internal arbiter can be controlled
+ * by the I2C strapping EEPROM. If you want to do so
+ * or if you want to disable the arbiter pci_pre_init()
+ * must be reimplemented without enabling the arbiter.
+ * The arbiter is enabled in this place because of
+ * compatibility reasons.
+ */
+ mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_ARBIT_EN);
+#endif /* CONFIG_405EP */
+
return 1;
}
int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init")));
@@ -99,6 +113,19 @@ ushort pmc405_pci_subsys_deviceid(void);
/*#define DEBUG*/
+int __is_pci_host(struct pci_controller *hose)
+{
+#if defined(CONFIG_405GP)
+ if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ return 1;
+#elif defined (CONFIG_405EP)
+ if (mfdcr(cpc0_pci) & CPC0_PCI_ARBIT_EN)
+ return 1;
+#endif
+ return 0;
+}
+int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
+
/*-----------------------------------------------------------------------------+
* pci_init. Initializes the 405GP PCI Configuration regs.
*-----------------------------------------------------------------------------*/
@@ -270,7 +297,7 @@ void pci_405gp_init(struct pci_controller *hose)
*/
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
#ifdef CONFIG_CPCI405
- if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
+ if (is_pci_host(hose))
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
else
pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
@@ -295,7 +322,7 @@ void pci_405gp_init(struct pci_controller *hose)
#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
@@ -310,8 +337,15 @@ void pci_405gp_init(struct pci_controller *hose)
}
#endif
-#if defined(CONFIG_405EP) /* on ppc405ep vendor id is not set */
- pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, 0x1014); /* IBM */
+#if defined(CONFIG_405EP)
+ /*
+ * on ppc405ep vendor/device id is not set
+ * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
+ * are the correct values.
+ */
+ pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
+ pci_write_config_word(PCIDEVID_405GP,
+ PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
#endif
/*
@@ -325,7 +359,7 @@ void pci_405gp_init(struct pci_controller *hose)
* Scan the PCI bus and configure devices found.
*--------------------------------------------------------------------------*/
#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if ((mfdcr(strap) & PSR_PCI_ARBIT_EN) ||
+ if (is_pci_host(hose) ||
(((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
#endif
{
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index 06f44ad..fb3837c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -54,6 +54,7 @@ int __get_cpu_num(void)
}
int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
+#if defined(CONFIG_PCI)
#if defined(CONFIG_405GP) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -76,6 +77,7 @@ static int pci_async_enabled(void)
#endif
}
#endif
+#endif /* CONFIG_PCI */
#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
!defined(CONFIG_405) && !defined(CONFIG_405EX)
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 577d33f..bbd795d 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -174,11 +174,6 @@ cpu_init_f (void)
* Set EMAC noise filter bits
*/
mtdcr(cpc0_epctl, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-
- /*
- * Enable the internal PCI arbiter
- */
- mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
#endif /* CONFIG_405EP */
#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index ac96fc2..582c781 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -2021,6 +2021,7 @@ pci_wait:
! Output r3 = none
!-----------------------------------------------------------------------------
*/
+ .globl pll_write
pll_write:
mfdcr r5, CPC0_UCR
andis. r5,r5,0xFFFF
diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c
index a95d1cb..d298b31 100644
--- a/cpu/ppc4xx/uic.c
+++ b/cpu/ppc4xx/uic.c
@@ -164,7 +164,7 @@ void pic_irq_enable(unsigned int vec)
else if (vec >= 96)
mtdcr(uic3er, mfdcr(uic3er) | UIC_MASK(vec));
- debug("Install interrupt for vector %d ==> %p\n", vec, handler);
+ debug("Install interrupt vector %d\n", vec);
}
void pic_irq_disable(unsigned int vec)
diff --git a/board/renesas/rsk7203/u-boot.lds b/cpu/sh2/u-boot.lds
index bd4a550..6db5a00 100644
--- a/board/renesas/rsk7203/u-boot.lds
+++ b/cpu/sh2/u-boot.lds
@@ -28,15 +28,9 @@ ENTRY(_start)
SECTIONS
{
/*
- * Base address of internal SDRAM is 0x0C000000.
- *
- * NOTE: This address must match with the definition of
- *TEXT_BASE in config.mk (in this directory).
+ * entry and reloct_dst will be provided via ldflags
*/
-
- . = 0x0C000000 + (8*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
+ . = .;
PROVIDE (_ftext = .);
PROVIDE (_fcode = .);
diff --git a/board/mpr2/u-boot.lds b/cpu/sh3/u-boot.lds
index deae344..1e55b83 100644
--- a/board/mpr2/u-boot.lds
+++ b/cpu/sh3/u-boot.lds
@@ -34,16 +34,9 @@ ENTRY(_start)
SECTIONS
{
/*
- Base address of internal SDRAM is 0x8C000000.
- U-Boot resides in the last 256 kB of the 64 MB.
-
- NOTE: This address must match with the definition of
- TEXT_BASE in config.mk (in this directory).
-
- */
- . = 0x8C000000 + (64*1024*1024) - (256*1024);
-
- PROVIDE (reloc_dst = .);
+ * entry and reloct_dst will be provided via ldflags
+ */
+ . = .;
PROVIDE (_ftext = .);
PROVIDE (_fcode = .);
diff --git a/board/renesas/sh7785lcr/u-boot.lds b/cpu/sh4/u-boot.lds
index 255ab37..bff9f43 100644
--- a/board/renesas/sh7785lcr/u-boot.lds
+++ b/cpu/sh4/u-boot.lds
@@ -1,7 +1,9 @@
/*
- * Copyrigth (c) 2007
+ * Copyright (C) 2007
* Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyrigth (c) 2008-2009 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * Copyright (C) 2008-2009
+ * Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,9 +30,10 @@ ENTRY(_start)
SECTIONS
{
- . = 0x88000000 + (128 * 1024 * 1024) - (512 * 1024);
-
- PROVIDE (reloc_dst = .);
+ /*
+ * entry and reloct_dst will be provided via ldflags
+ */
+ . = .;
PROVIDE (_ftext = .);
PROVIDE (_fcode = .);
@@ -85,7 +88,7 @@ SECTIONS
PROVIDE (bss_start = .);
PROVIDE (__bss_start = .);
- .bss :
+ .bss (NOLOAD) :
{
*(.bss)
. = ALIGN(4);
diff --git a/doc/README.nand b/doc/README.nand
index bb72289..b077d9a 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -101,15 +101,6 @@ Configuration Options:
CONFIG_SYS_NAND_MAX_CHIPS
The maximum number of NAND chips per device to be supported.
- CONFIG_SYS_DAVINCI_BROKEN_ECC
- Versions of U-Boot <= 1.3.3 and Montavista Linux kernels
- generated bogus ECCs on large-page NAND. Both large and small page
- NAND ECCs were incompatible with the Linux davinci git tree (since
- NAND was integrated in 2.6.24).
- Turn this ON if you want backwards compatibility.
- Turn this OFF if you want U-Boot and the Linux davinci git kernel
- to use the same ECC format.
-
NOTE:
=====
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index d0732f5..81ac5d3 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -835,14 +835,19 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest,
break;
case CFI_CMDSET_AMD_EXTENDED:
case CFI_CMDSET_AMD_STANDARD:
-#ifdef CONFIG_FLASH_CFI_LEGACY
- case CFI_CMDSET_AMD_LEGACY:
-#endif
sect = find_sector(info, dest);
flash_unlock_seq (info, sect);
flash_write_cmd (info, sect, info->addr_unlock1, AMD_CMD_WRITE);
sect_found = 1;
break;
+#ifdef CONFIG_FLASH_CFI_LEGACY
+ case CFI_CMDSET_AMD_LEGACY:
+ sect = find_sector(info, dest);
+ flash_unlock_seq (info, 0);
+ flash_write_cmd (info, 0, info->addr_unlock1, AMD_CMD_WRITE);
+ sect_found = 1;
+ break;
+#endif
}
switch (info->portwidth) {
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index d4d3948..a5680e8 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -43,9 +43,10 @@ COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
-COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.c
+COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
COBJS-$(CONFIG_NAND_S3C64XX) += s3c64xx.o
COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 8ef18b8..ca40c6a 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -47,7 +47,7 @@
#include <asm/arch/nand_defs.h>
#include <asm/arch/emif_defs.h>
-extern struct nand_chip nand_dev_desc[CONFIG_SYS_MAX_NAND_DEVICE];
+static emif_registers *const emif_regs = (void *) DAVINCI_ASYNC_EMIF_CNTRL_BASE;
static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
@@ -68,81 +68,30 @@ static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int c
writeb(cmd, this->IO_ADDR_W);
}
-/* Set WP on deselect, write enable on select */
-static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
-{
-#define GPIO_SET_DATA01 0x01c67018
-#define GPIO_CLR_DATA01 0x01c6701c
-#define GPIO_NAND_WP (1 << 4)
-#ifdef SONATA_BOARD_GPIOWP
- if (chip < 0) {
- REG(GPIO_CLR_DATA01) |= GPIO_NAND_WP;
- } else {
- REG(GPIO_SET_DATA01) |= GPIO_NAND_WP;
- }
-#endif
-}
-
#ifdef CONFIG_SYS_NAND_HW_ECC
-#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
-/* Linux-compatible ECC uses MTD defaults. */
-/* These layouts are not compatible with Linux or RBL/UBL. */
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
-static struct nand_ecclayout davinci_nand_ecclayout = {
- .eccbytes = 12,
- .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
- .oobfree = {
- {.offset = 2, .length = 6},
- {.offset = 12, .length = 12},
- {.offset = 28, .length = 12},
- {.offset = 44, .length = 12},
- {.offset = 60, .length = 4}
- }
-};
-#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
-static struct nand_ecclayout davinci_nand_ecclayout = {
- .eccbytes = 3,
- .eccpos = {0, 1, 2},
- .oobfree = {
- {.offset = 6, .length = 2},
- {.offset = 8, .length = 8}
- }
-};
-#else
-#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
-#endif
-#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
static void nand_davinci_enable_hwecc(struct mtd_info *mtd, int mode)
{
- emifregs emif_addr;
int dummy;
- emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
+ dummy = emif_regs->NANDF1ECC;
- dummy = emif_addr->NANDF1ECC;
- dummy = emif_addr->NANDF2ECC;
- dummy = emif_addr->NANDF3ECC;
- dummy = emif_addr->NANDF4ECC;
-
- emif_addr->NANDFCR |= (1 << 8);
+ /* FIXME: only chipselect 0 is supported for now */
+ emif_regs->NANDFCR |= 1 << 8;
}
static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
{
u_int32_t ecc = 0;
- emifregs emif_base_addr;
-
- emif_base_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
if (region == 1)
- ecc = emif_base_addr->NANDF1ECC;
+ ecc = emif_regs->NANDF1ECC;
else if (region == 2)
- ecc = emif_base_addr->NANDF2ECC;
+ ecc = emif_regs->NANDF2ECC;
else if (region == 3)
- ecc = emif_base_addr->NANDF3ECC;
+ ecc = emif_regs->NANDF3ECC;
else if (region == 4)
- ecc = emif_base_addr->NANDF4ECC;
+ ecc = emif_regs->NANDF4ECC;
return(ecc);
}
@@ -150,29 +99,6 @@ static u_int32_t nand_davinci_readecc(struct mtd_info *mtd, u_int32_t region)
static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
{
u_int32_t tmp;
-#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
- /*
- * This is not how you should read ECCs on large page Davinci devices.
- * The region parameter gets you ECCs for flash chips on different chip
- * selects, not the 4x512 byte pages in a 2048 byte page.
- *
- * Preserved for backwards compatibility though.
- */
-
- int region, n;
- struct nand_chip *this = mtd->priv;
-
- n = (this->ecc.size/512);
-
- region = 1;
- while (n--) {
- tmp = nand_davinci_readecc(mtd, region);
- *ecc_code++ = tmp;
- *ecc_code++ = tmp >> 16;
- *ecc_code++ = ((tmp >> 8) & 0x0f) | ((tmp >> 20) & 0xf0);
- region++;
- }
-#else
const int region = 1;
tmp = nand_davinci_readecc(mtd, region);
@@ -187,148 +113,26 @@ static int nand_davinci_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
*ecc_code++ = tmp;
*ecc_code++ = tmp >> 8;
*ecc_code++ = tmp >> 16;
-#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
- return(0);
-}
-
-#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
-static void nand_davinci_gen_true_ecc(u_int8_t *ecc_buf)
-{
- u_int32_t tmp = ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xf0) << 20) | ((ecc_buf[2] & 0x0f) << 8);
-
- ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) | P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp));
- ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) | P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp));
- ecc_buf[2] = ~( P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) | P1e(tmp) | P2048o(tmp) | P2048e(tmp));
-}
-
-static int nand_davinci_compare_ecc(u_int8_t *ecc_nand, u_int8_t *ecc_calc, u_int8_t *page_data)
-{
- u_int32_t i;
- u_int8_t tmp0_bit[8], tmp1_bit[8], tmp2_bit[8];
- u_int8_t comp0_bit[8], comp1_bit[8], comp2_bit[8];
- u_int8_t ecc_bit[24];
- u_int8_t ecc_sum = 0;
- u_int8_t find_bit = 0;
- u_int32_t find_byte = 0;
- int is_ecc_ff;
-
- is_ecc_ff = ((*ecc_nand == 0xff) && (*(ecc_nand + 1) == 0xff) && (*(ecc_nand + 2) == 0xff));
-
- nand_davinci_gen_true_ecc(ecc_nand);
- nand_davinci_gen_true_ecc(ecc_calc);
-
- for (i = 0; i <= 2; i++) {
- *(ecc_nand + i) = ~(*(ecc_nand + i));
- *(ecc_calc + i) = ~(*(ecc_calc + i));
- }
- for (i = 0; i < 8; i++) {
- tmp0_bit[i] = *ecc_nand % 2;
- *ecc_nand = *ecc_nand / 2;
- }
-
- for (i = 0; i < 8; i++) {
- tmp1_bit[i] = *(ecc_nand + 1) % 2;
- *(ecc_nand + 1) = *(ecc_nand + 1) / 2;
- }
-
- for (i = 0; i < 8; i++) {
- tmp2_bit[i] = *(ecc_nand + 2) % 2;
- *(ecc_nand + 2) = *(ecc_nand + 2) / 2;
- }
-
- for (i = 0; i < 8; i++) {
- comp0_bit[i] = *ecc_calc % 2;
- *ecc_calc = *ecc_calc / 2;
- }
-
- for (i = 0; i < 8; i++) {
- comp1_bit[i] = *(ecc_calc + 1) % 2;
- *(ecc_calc + 1) = *(ecc_calc + 1) / 2;
- }
-
- for (i = 0; i < 8; i++) {
- comp2_bit[i] = *(ecc_calc + 2) % 2;
- *(ecc_calc + 2) = *(ecc_calc + 2) / 2;
- }
-
- for (i = 0; i< 6; i++)
- ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2];
-
- for (i = 0; i < 8; i++)
- ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i];
-
- for (i = 0; i < 8; i++)
- ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i];
-
- ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0];
- ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1];
-
- for (i = 0; i < 24; i++)
- ecc_sum += ecc_bit[i];
+ /* NOTE: the above code matches mainline Linux:
+ * .PQR.stu ==> ~PQRstu
+ *
+ * MontaVista/TI kernels encode those bytes differently, use
+ * complicated (and allegedly sometimes-wrong) correction code,
+ * and usually shipped with U-Boot that uses software ECC:
+ * .PQR.stu ==> PsQRtu
+ *
+ * If you need MV/TI compatible NAND I/O in U-Boot, it should
+ * be possible to (a) change the mangling above, (b) reverse
+ * that mangling in nand_davinci_correct_data() below.
+ */
- switch (ecc_sum) {
- case 0:
- /* Not reached because this function is not called if
- ECC values are equal */
- return 0;
- case 1:
- /* Uncorrectable error */
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "ECC UNCORRECTED_ERROR 1\n");
- return(-1);
- case 12:
- /* Correctable error */
- find_byte = (ecc_bit[23] << 8) +
- (ecc_bit[21] << 7) +
- (ecc_bit[19] << 6) +
- (ecc_bit[17] << 5) +
- (ecc_bit[15] << 4) +
- (ecc_bit[13] << 3) +
- (ecc_bit[11] << 2) +
- (ecc_bit[9] << 1) +
- ecc_bit[7];
-
- find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
-
- MTDDEBUG (MTD_DEBUG_LEVEL0, "Correcting single bit ECC "
- "error at offset: %d, bit: %d\n",
- find_byte, find_bit);
-
- page_data[find_byte] ^= (1 << find_bit);
-
- return(0);
- default:
- if (is_ecc_ff) {
- if (ecc_calc[0] == 0 && ecc_calc[1] == 0 && ecc_calc[2] == 0)
- return(0);
- }
- MTDDEBUG (MTD_DEBUG_LEVEL0,
- "UNCORRECTED_ERROR default\n");
- return(-1);
- }
+ return 0;
}
-#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
struct nand_chip *this = mtd->priv;
-#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
- int block_count = 0, i, rc;
-
- block_count = (this->ecc.size/512);
- for (i = 0; i < block_count; i++) {
- if (memcmp(read_ecc, calc_ecc, 3) != 0) {
- rc = nand_davinci_compare_ecc(read_ecc, calc_ecc, dat);
- if (rc < 0) {
- return(rc);
- }
- }
- read_ecc += 3;
- calc_ecc += 3;
- dat += 512;
- }
-#else
u_int32_t ecc_nand = read_ecc[0] | (read_ecc[1] << 8) |
(read_ecc[2] << 16);
u_int32_t ecc_calc = calc_ecc[0] | (calc_ecc[1] << 8) |
@@ -362,31 +166,24 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
return -1;
}
}
-#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
return(0);
}
#endif /* CONFIG_SYS_NAND_HW_ECC */
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
- emifregs emif_addr;
-
- emif_addr = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
-
- return(emif_addr->NANDFSR & 0x1);
-}
-
-static int nand_davinci_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
-{
- while(!nand_davinci_dev_ready(mtd)) {;}
- *NAND_CE0CLE = NAND_STATUS;
- return(*NAND_CE0DATA);
+ return emif_regs->NANDFSR & 0x1;
}
static void nand_flash_init(void)
{
+ /* This is for DM6446 EVM and *very* similar. DO NOT GROW THIS!
+ * Instead, have your board_init() set EMIF timings, based on its
+ * knowledge of the clocks and what devices are hooked up ... and
+ * don't even do that unless no UBL handled it.
+ */
+#ifdef CONFIG_SOC_DM6446
u_int32_t acfg1 = 0x3ffffffc;
- emifregs emif_regs;
/*------------------------------------------------------------------*
* NAND FLASH CHIP TIMEOUT @ 459 MHz *
@@ -408,39 +205,22 @@ static void nand_flash_init(void)
| (0 << 0 ) /* asyncSize 8-bit bus */
;
- emif_regs = (emifregs)DAVINCI_ASYNC_EMIF_CNTRL_BASE;
-
emif_regs->AB1CR = acfg1; /* CS2 */
emif_regs->NANDFCR = 0x00000101; /* NAND flash on CS2 */
+#endif
}
-int board_nand_init(struct nand_chip *nand)
+void davinci_nand_init(struct nand_chip *nand)
{
- nand->IO_ADDR_R = (void __iomem *)NAND_CE0DATA;
- nand->IO_ADDR_W = (void __iomem *)NAND_CE0DATA;
nand->chip_delay = 0;
- nand->select_chip = nand_davinci_select_chip;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
nand->options = NAND_USE_FLASH_BBT;
#endif
#ifdef CONFIG_SYS_NAND_HW_ECC
nand->ecc.mode = NAND_ECC_HW;
-#ifdef CONFIG_SYS_DAVINCI_BROKEN_ECC
- nand->ecc.layout = &davinci_nand_ecclayout;
-#ifdef CONFIG_SYS_NAND_LARGEPAGE
- nand->ecc.size = 2048;
- nand->ecc.bytes = 12;
-#elif defined(CONFIG_SYS_NAND_SMALLPAGE)
nand->ecc.size = 512;
nand->ecc.bytes = 3;
-#else
-#error "Either CONFIG_SYS_NAND_LARGEPAGE or CONFIG_SYS_NAND_SMALLPAGE must be defined!"
-#endif
-#else
- nand->ecc.size = 512;
- nand->ecc.bytes = 3;
-#endif /* CONFIG_SYS_DAVINCI_BROKEN_ECC */
nand->ecc.calculate = nand_davinci_calculate_ecc;
nand->ecc.correct = nand_davinci_correct_data;
nand->ecc.hwctl = nand_davinci_enable_hwecc;
@@ -452,9 +232,14 @@ int board_nand_init(struct nand_chip *nand)
nand->cmd_ctrl = nand_davinci_hwcontrol;
nand->dev_ready = nand_davinci_dev_ready;
- nand->waitfunc = nand_davinci_waitfunc;
nand_flash_init();
+}
- return(0);
+int board_nand_init(struct nand_chip *chip) __attribute__((weak));
+
+int board_nand_init(struct nand_chip *chip)
+{
+ davinci_nand_init(chip);
+ return 0;
}
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 3f318e0..77a33c0 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -766,6 +766,9 @@ int board_nand_init(struct nand_chip *nand)
nand->waitfunc = fsl_elbc_wait;
/* set up nand options */
+ /* redirect the pointer of bbt pattern to RAM */
+ bbt_main_descr.pattern = bbt_pattern;
+ bbt_mirror_descr.pattern = mirror_pattern;
nand->bbt_td = &bbt_main_descr;
nand->bbt_md = &bbt_mirror_descr;
@@ -812,6 +815,7 @@ int board_nand_init(struct nand_chip *nand)
/* Large-page-specific setup */
if (or & OR_FCM_PGS) {
priv->page_size = 1;
+ largepage_memorybased.pattern = scan_ff_pattern;
nand->badblock_pattern = &largepage_memorybased;
/* adjust ecc setup if needed */
diff --git a/drivers/mtd/nand/nand_plat.c b/drivers/mtd/nand/nand_plat.c
new file mode 100644
index 0000000..b35492b
--- /dev/null
+++ b/drivers/mtd/nand/nand_plat.c
@@ -0,0 +1,53 @@
+/*
+ * Genericish driver for memory mapped NAND devices
+ *
+ * Copyright (c) 2006-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* Your board must implement the following macros:
+ * NAND_PLAT_WRITE_CMD(chip, cmd)
+ * NAND_PLAT_WRITE_ADR(chip, cmd)
+ * NAND_PLAT_INIT()
+ *
+ * It may also implement the following:
+ * NAND_PLAT_DEV_READY(chip)
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include <nand.h>
+
+static void plat_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ NAND_PLAT_WRITE_CMD(this, cmd);
+ else
+ NAND_PLAT_WRITE_ADR(this, cmd);
+}
+
+#ifdef NAND_PLAT_DEV_READY
+static int plat_dev_ready(struct mtd_info *mtd)
+{
+ return NAND_PLAT_DEV_READY((struct nand_chip *)mtd->priv);
+}
+#else
+# define plat_dev_ready NULL
+#endif
+
+int board_nand_init(struct nand_chip *nand)
+{
+ NAND_PLAT_INIT();
+
+ nand->cmd_ctrl = plat_cmd_ctrl;
+ nand->dev_ready = plat_dev_ready;
+ nand->ecc.mode = NAND_ECC_SOFT;
+
+ return 0;
+}
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 88206d0..fc16282 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -315,7 +315,7 @@ int nand_lock(struct mtd_info *mtd, int tight)
* NAND_LOCK_STATUS_UNLOCK: page unlocked
*
*/
-int nand_get_lock_status(struct mtd_info *mtd, ulong offset)
+int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
{
int ret = 0;
int chipnr;
@@ -436,7 +436,7 @@ int nand_unlock(struct mtd_info *mtd, ulong start, ulong length)
* @param length image length
* @return image length including bad blocks
*/
-static size_t get_len_incl_bad (nand_info_t *nand, size_t offset,
+static size_t get_len_incl_bad (nand_info_t *nand, loff_t offset,
const size_t length)
{
size_t len_incl_bad = 0;
@@ -473,7 +473,7 @@ static size_t get_len_incl_bad (nand_info_t *nand, size_t offset,
* @param buf buffer to read from
* @return 0 in case of success
*/
-int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
u_char *buffer)
{
int rval;
@@ -498,7 +498,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
if (len_incl_bad == *length) {
rval = nand_write (nand, offset, length, buffer);
if (rval != 0)
- printf ("NAND write to offset %zx failed %d\n",
+ printf ("NAND write to offset %llx failed %d\n",
offset, rval);
return rval;
@@ -509,7 +509,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
size_t write_size;
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skip bad block 0x%08zx\n",
+ printf ("Skip bad block 0x%08llx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
@@ -522,7 +522,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
rval = nand_write (nand, offset, &write_size, p_buffer);
if (rval != 0) {
- printf ("NAND write to offset %zx failed %d\n",
+ printf ("NAND write to offset %llx failed %d\n",
offset, rval);
*length -= left_to_write;
return rval;
@@ -550,7 +550,7 @@ int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
* @param buffer buffer to write to
* @return 0 in case of success
*/
-int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
u_char *buffer)
{
int rval;
@@ -568,7 +568,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
if (len_incl_bad == *length) {
rval = nand_read (nand, offset, length, buffer);
if (rval != 0)
- printf ("NAND read from offset %zx failed %d\n",
+ printf ("NAND read from offset %llx failed %d\n",
offset, rval);
return rval;
@@ -579,7 +579,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
size_t read_length;
if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
- printf ("Skipping bad block 0x%08zx\n",
+ printf ("Skipping bad block 0x%08llx\n",
offset & ~(nand->erasesize - 1));
offset += nand->erasesize - block_offset;
continue;
@@ -592,7 +592,7 @@ int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
rval = nand_read (nand, offset, &read_length, p_buffer);
if (rval != 0) {
- printf ("NAND read from offset %zx failed %d\n",
+ printf ("NAND read from offset %llx failed %d\n",
offset, rval);
*length -= left_to_read;
return rval;
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ec1d689..940d4a8 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
+COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf148c4..c674929 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -41,15 +41,15 @@ int ehci_hcd_init(void)
struct usb_ehci *ehci;
ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
- hccr = (struct ehci_hccr *)((uint32_t)ehci->caplength);
+ hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
hcor = (struct ehci_hcor *)((uint32_t) hccr +
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
/* Set to Host mode */
- setbits_le32((void *)ehci->usbmode, CM_HOST);
+ setbits_le32(&ehci->usbmode, CM_HOST);
- out_be32((void *)ehci->snoop1, SNOOP_SIZE_2GB);
- out_be32((void *)ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
+ out_be32(&ehci->snoop1, SNOOP_SIZE_2GB);
+ out_be32(&ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB);
/* Init phy */
if (!strcmp(getenv("usb_phy_type"), "utmi"))
@@ -58,13 +58,13 @@ int ehci_hcd_init(void)
out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI);
/* Enable interface. */
- setbits_be32((void *)ehci->control, USB_EN);
+ setbits_be32(&ehci->control, USB_EN);
- out_be32((void *)ehci->prictrl, 0x0000000c);
- out_be32((void *)ehci->age_cnt_limit, 0x00000040);
- out_be32((void *)ehci->sictrl, 0x00000001);
+ out_be32(&ehci->prictrl, 0x0000000c);
+ out_be32(&ehci->age_cnt_limit, 0x00000040);
+ out_be32(&ehci->sictrl, 0x00000001);
- in_le32((void *)ehci->usbmode);
+ in_le32(&ehci->usbmode);
return 0;
}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index bbd547b..423ea5d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -716,7 +716,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
goto unknown;
}
/* unblock posted writes */
- ehci_readl(&hcor->or_usbcmd);
+ (void) ehci_readl(&hcor->or_usbcmd);
break;
case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8):
reg = ehci_readl(status_reg);
@@ -745,7 +745,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer,
}
ehci_writel(status_reg, reg);
/* unblock posted write */
- ehci_readl(&hcor->or_usbcmd);
+ (void) ehci_readl(&hcor->or_usbcmd);
break;
default:
debug("Unknown request\n");
diff --git a/drivers/usb/host/ehci-kirkwood.c b/drivers/usb/host/ehci-kirkwood.c
new file mode 100644
index 0000000..64997b8
--- /dev/null
+++ b/drivers/usb/host/ehci-kirkwood.c
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include "ehci.h"
+#include "ehci-core.h"
+#include <asm/arch/kirkwood.h>
+
+#define rdl(off) readl(KW_USB20_BASE + (off))
+#define wrl(off, val) writel((val), KW_USB20_BASE + (off))
+
+#define USB_WINDOW_CTRL(i) (0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i) (0x324 + ((i) << 4))
+#define USB_TARGET_DRAM 0x0
+
+/*
+ * USB 2.0 Bridge Address Decoding registers setup
+ */
+static void usb_brg_adrdec_setup(void)
+{
+ int i;
+ u32 size, attrib;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+
+ /* Enable DRAM bank */
+ switch (i) {
+ case 0:
+ attrib = KWCPU_ATTR_DRAM_CS0;
+ break;
+ case 1:
+ attrib = KWCPU_ATTR_DRAM_CS1;
+ break;
+ case 2:
+ attrib = KWCPU_ATTR_DRAM_CS2;
+ break;
+ case 3:
+ attrib = KWCPU_ATTR_DRAM_CS3;
+ break;
+ default:
+ /* invalide bank, disable access */
+ attrib = 0;
+ break;
+ }
+
+ size = kw_sdram_bs(i);
+ if ((size) && (attrib))
+ wrl(USB_WINDOW_CTRL(i),
+ KWCPU_WIN_CTRL_DATA(size, USB_TARGET_DRAM,
+ attrib, KWCPU_WIN_ENABLE));
+ else
+ wrl(USB_WINDOW_CTRL(i), KWCPU_WIN_DISABLE);
+
+ wrl(USB_WINDOW_BASE(i), kw_sdram_bar(i));
+ }
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(void)
+{
+ usb_brg_adrdec_setup();
+
+ hccr = (struct ehci_hccr *)(KW_USB20_BASE + 0x100);
+ hcor = (struct ehci_hcor *)((uint32_t) hccr
+ + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ debug("Kirkwood-ehci: init hccr %x and hcor %x hc_length %d\n",
+ (uint32_t)hccr, (uint32_t)hcor,
+ (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(void)
+{
+ return 0;
+}
+
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index b81c536..f9da3f0 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -307,10 +307,4 @@ extern void musb_configure_ep(struct musb_epinfo *epinfo, u8 cnt);
extern void write_fifo(u8 ep, u32 length, void *fifo_data);
extern void read_fifo(u8 ep, u32 length, void *fifo_data);
-/* extern functions */
-extern inline void musb_writew(u32 offset, u16 value);
-extern inline void musb_writeb(u32 offset, u8 value);
-extern inline u16 musb_readw(u32 offset);
-extern inline u8 musb_readb(u32 offset);
-
#endif /* __MUSB_HDRC_DEFS_H__ */
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index 352a0d4..19d978b 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -111,6 +111,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
{
u16 csr;
int result = 1;
+ int timeout = CONFIG_MUSB_TIMEOUT;
while (result > 0) {
csr = readw(&musbr->txcsr);
@@ -152,7 +153,17 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
}
break;
}
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ result = -1;
+ break;
+ }
}
+
return result;
}
@@ -162,6 +173,7 @@ static int wait_until_ep0_ready(struct usb_device *dev, u32 bit_mask)
static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
+ int timeout = CONFIG_MUSB_TIMEOUT;
do {
if (check_stall(ep, 1)) {
@@ -174,6 +186,15 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
dev->status = USB_ST_CRC_ERR;
return 0;
}
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
} while (csr & MUSB_TXCSR_TXPKTRDY);
return 1;
}
@@ -184,6 +205,7 @@ static u8 wait_until_txep_ready(struct usb_device *dev, u8 ep)
static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
{
u16 csr;
+ int timeout = CONFIG_MUSB_TIMEOUT;
do {
if (check_stall(ep, 0)) {
@@ -196,6 +218,15 @@ static u8 wait_until_rxep_ready(struct usb_device *dev, u8 ep)
dev->status = USB_ST_CRC_ERR;
return 0;
}
+
+ /* Check the timeout */
+ if (--timeout)
+ udelay(1);
+ else {
+ dev->status = USB_ST_CRC_ERR;
+ return -1;
+ }
+
} while (!(csr & MUSB_RXCSR_RXPKTRDY));
return 1;
}
diff --git a/drivers/usb/musb/musb_hcd.h b/drivers/usb/musb/musb_hcd.h
index bb83311..b7f571d 100644
--- a/drivers/usb/musb/musb_hcd.h
+++ b/drivers/usb/musb/musb_hcd.h
@@ -30,6 +30,10 @@
extern unsigned char new[];
#endif
+#ifndef CONFIG_MUSB_TIMEOUT
+# define CONFIG_MUSB_TIMEOUT 100000
+#endif
+
/* This defines the endpoint number used for control transfers */
#define MUSB_CONTROL_EP 0
diff --git a/include/asm-arm/arch-davinci/nand_defs.h b/include/asm-arm/arch-davinci/nand_defs.h
index 187d3c3..386540e 100644
--- a/include/asm-arm/arch-davinci/nand_defs.h
+++ b/include/asm-arm/arch-davinci/nand_defs.h
@@ -28,134 +28,18 @@
#include <asm/arch/hardware.h>
+#ifdef CONFIG_SOC_DM646x
+#define MASK_CLE 0x80000
+#define MASK_ALE 0x40000
+#else
#define MASK_CLE 0x10
-#define MASK_ALE 0x0a
-
-#define NAND_CE0CLE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x10))
-#define NAND_CE0ALE ((volatile u_int8_t *)(CONFIG_SYS_NAND_BASE + 0x0a))
-#define NAND_CE0DATA ((volatile u_int8_t *)CONFIG_SYS_NAND_BASE)
-
-typedef struct {
- u_int32_t NRCSR;
- u_int32_t AWCCR;
- u_int8_t RSVD0[8];
- u_int32_t AB1CR;
- u_int32_t AB2CR;
- u_int32_t AB3CR;
- u_int32_t AB4CR;
- u_int8_t RSVD1[32];
- u_int32_t NIRR;
- u_int32_t NIMR;
- u_int32_t NIMSR;
- u_int32_t NIMCR;
- u_int8_t RSVD2[16];
- u_int32_t NANDFCR;
- u_int32_t NANDFSR;
- u_int8_t RSVD3[8];
- u_int32_t NANDF1ECC;
- u_int32_t NANDF2ECC;
- u_int32_t NANDF3ECC;
- u_int32_t NANDF4ECC;
- u_int8_t RSVD4[4];
- u_int32_t IODFTECR;
- u_int32_t IODFTGCR;
- u_int8_t RSVD5[4];
- u_int32_t IODFTMRLR;
- u_int32_t IODFTMRMR;
- u_int32_t IODFTMRMSBR;
- u_int8_t RSVD6[20];
- u_int32_t MODRNR;
- u_int8_t RSVD7[76];
- u_int32_t CE0DATA;
- u_int32_t CE0ALE;
- u_int32_t CE0CLE;
- u_int8_t RSVD8[4];
- u_int32_t CE1DATA;
- u_int32_t CE1ALE;
- u_int32_t CE1CLE;
- u_int8_t RSVD9[4];
- u_int32_t CE2DATA;
- u_int32_t CE2ALE;
- u_int32_t CE2CLE;
- u_int8_t RSVD10[4];
- u_int32_t CE3DATA;
- u_int32_t CE3ALE;
- u_int32_t CE3CLE;
-} nand_registers;
-
-typedef volatile nand_registers *nandregs;
+#define MASK_ALE 0x08
+#endif
#define NAND_READ_START 0x00
#define NAND_READ_END 0x30
#define NAND_STATUS 0x70
-#ifdef CONFIG_SYS_NAND_HW_ECC
-#define NAND_Ecc_P1e (1 << 0)
-#define NAND_Ecc_P2e (1 << 1)
-#define NAND_Ecc_P4e (1 << 2)
-#define NAND_Ecc_P8e (1 << 3)
-#define NAND_Ecc_P16e (1 << 4)
-#define NAND_Ecc_P32e (1 << 5)
-#define NAND_Ecc_P64e (1 << 6)
-#define NAND_Ecc_P128e (1 << 7)
-#define NAND_Ecc_P256e (1 << 8)
-#define NAND_Ecc_P512e (1 << 9)
-#define NAND_Ecc_P1024e (1 << 10)
-#define NAND_Ecc_P2048e (1 << 11)
-
-#define NAND_Ecc_P1o (1 << 16)
-#define NAND_Ecc_P2o (1 << 17)
-#define NAND_Ecc_P4o (1 << 18)
-#define NAND_Ecc_P8o (1 << 19)
-#define NAND_Ecc_P16o (1 << 20)
-#define NAND_Ecc_P32o (1 << 21)
-#define NAND_Ecc_P64o (1 << 22)
-#define NAND_Ecc_P128o (1 << 23)
-#define NAND_Ecc_P256o (1 << 24)
-#define NAND_Ecc_P512o (1 << 25)
-#define NAND_Ecc_P1024o (1 << 26)
-#define NAND_Ecc_P2048o (1 << 27)
-
-#define TF(v) (v ? 1 : 0)
-
-#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0)
-#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1)
-#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2)
-#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3)
-#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4)
-#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5)
-#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6)
-#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7)
-
-#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0)
-#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1)
-#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2)
-#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3)
-#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4)
-#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5)
-#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6)
-#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7)
-
-#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0)
-#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1)
-#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2)
-#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3)
-#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4)
-#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5)
-#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6)
-#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7)
-
-#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0)
-#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1)
-#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2)
-#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3)
-#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4)
-#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5)
-#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6)
-#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7)
-
-#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
-#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
-#endif
+extern void davinci_nand_init(struct nand_chip *nand);
#endif
diff --git a/include/asm-sh/clk.h b/include/asm-sh/clk.h
new file mode 100644
index 0000000..9cac6b0
--- /dev/null
+++ b/include/asm-sh/clk.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_SH_CLK_H__
+#define __ASM_SH_CLK_H__
+
+static inline unsigned long get_peripheral_clk_rate(void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+static inline unsigned long get_tmu0_clk_rate(void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+#endif /* __ASM_SH_CLK_H__ */
diff --git a/include/asm-sh/macro.h b/include/asm-sh/macro.h
index 61f792a..2b273c3 100644
--- a/include/asm-sh/macro.h
+++ b/include/asm-sh/macro.h
@@ -29,7 +29,7 @@
.macro write16, addr, data
mov.l \addr ,r1
- mov.l \data ,r0
+ mov.w \data ,r0
mov.w r0, @r1
.endm
diff --git a/include/common.h b/include/common.h
index 6284b8a..a6c7c07 100644
--- a/include/common.h
+++ b/include/common.h
@@ -275,7 +275,8 @@ void pci_init_board(void);
void pciinfo (int, int);
#if defined(CONFIG_PCI) && (defined(CONFIG_4xx) && !defined(CONFIG_AP1000))
- int pci_pre_init (struct pci_controller * );
+ int pci_pre_init (struct pci_controller *);
+ int is_pci_host (struct pci_controller *);
#endif
#if defined(CONFIG_PCI) && (defined(CONFIG_440) || defined(CONFIG_405EX))
@@ -285,7 +286,6 @@ void pciinfo (int, int);
# if defined(CONFIG_SYS_PCI_MASTER_INIT)
void pci_master_init (struct pci_controller *);
# endif
- int is_pci_host (struct pci_controller *);
#if defined(CONFIG_440SPE) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
defined(CONFIG_405EX)
@@ -688,7 +688,7 @@ int pcmcia_init (void);
/*
* Board-specific Platform code can reimplement show_boot_progress () if needed
*/
-void __attribute__((weak)) show_boot_progress (int val);
+void show_boot_progress(int val);
#ifdef CONFIG_INIT_CRITICAL
#error CONFIG_INIT_CRITICAL is deprecated!
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index c9589bd..3853574 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -141,7 +141,7 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
#endif /* __MIGO_R_H */
diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h
index c6d77e3..6f58a05 100644
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@@ -170,7 +170,7 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
#endif /* __AP325RXA_H */
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index 0a86e83..98300db 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -151,36 +151,28 @@
/*
* NAND Settings
*/
-/* #define CONFIG_BF537_NAND */
-#ifdef CONFIG_BF537_NAND
-# define CONFIG_CMD_NAND
-#endif
-
-#define CONFIG_SYS_NAND_ADDR 0x20212000
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_NAND_ADDR
+/* #define CONFIG_NAND_PLAT */
+#define CONFIG_SYS_NAND_BASE 0x20212000
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define SECTORSIZE 512
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-#define NAND_ChipID_UNKNOWN 0x00
-#define NAND_MAX_FLOORS 1
-#define BFIN_NAND_READY PF3
-
-#define NAND_WAIT_READY(nand) \
+
+#define BFIN_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 2))
+#define BFIN_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 1))
+#define BFIN_NAND_READY PF3
+#define BFIN_NAND_WRITE(addr, cmd) \
do { \
- int timeout = 0; \
- while (!(*pPORTFIO & PF3)) \
- if (timeout++ > 100000) \
- break; \
+ bfin_write8(addr, cmd); \
+ SSYNC(); \
} while (0)
-#define BFIN_NAND_CLE (1 << 2) /* A2 -> Command Enable */
-#define BFIN_NAND_ALE (1 << 1) /* A1 -> Address Enable */
-#define WRITE_NAND_COMMAND(d, adr) bfin_write8(adr | BFIN_NAND_CLE, d)
-#define WRITE_NAND_ADDRESS(d, adr) bfin_write8(adr | BFIN_NAND_ALE, d)
-#define WRITE_NAND(d, adr) bfin_write8(adr, d)
-#define READ_NAND(adr) bfin_read8(adr)
+#define NAND_PLAT_WRITE_CMD(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(chip, cmd) BFIN_NAND_WRITE(BFIN_NAND_ALE(chip), cmd)
+#define NAND_PLAT_DEV_READY(chip) (bfin_read_PORTFIO() & BFIN_NAND_READY)
+#define NAND_PLAT_INIT() \
+ do { \
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~BFIN_NAND_READY); \
+ bfin_write_PORTFIO_DIR(bfin_read_PORTFIO_DIR() & ~BFIN_NAND_READY); \
+ bfin_write_PORTFIO_INEN(bfin_read_PORTFIO_INEN() | BFIN_NAND_READY); \
+ } while (0)
/*
diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h
index 4149a29..1ca2e51 100644
--- a/include/configs/bfin_adi_common.h
+++ b/include/configs/bfin_adi_common.h
@@ -38,6 +38,9 @@
# define CONFIG_CMD_USB_STORAGE
# define CONFIG_DOS_PARTITION
# endif
+# ifdef CONFIG_NAND_PLAT
+# define CONFIG_CMD_NAND
+# endif
# ifdef CONFIG_POST
# define CONFIG_CMD_DIAG
# endif
diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h
index 1e4c716..887f3fb 100644
--- a/include/configs/blackstamp.h
+++ b/include/configs/blackstamp.h
@@ -83,10 +83,9 @@
#endif
#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET 0x4000
+#define CONFIG_ENV_OFFSET 0x40000
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x40000
-#define ENV_IS_EMBEDDED_CUSTOM
/*
* SDRAM settings & memory map
@@ -245,9 +244,9 @@
* Serial Flash Infomation
*/
#define CONFIG_BFIN_SPI
-/* For the M25P64 SCK Should be Kept < 20Mhz */
-#define CONFIG_ENV_SPI_MAX_HZ 20000000
-#define CONFIG_SF_DEFAULT_SPEED 20000000
+/* For the M25P64 SCK Should be Kept < 15Mhz */
+#define CONFIG_ENV_SPI_MAX_HZ 15000000
+#define CONFIG_SF_DEFAULT_SPEED 15000000
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index d814012..48c5198 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -132,9 +132,11 @@
*/
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CONFIG_SYS_NOR_CS 0 /* NOR chip connected to CSx */
#define CONFIG_SYS_NAND_CS 3 /* NAND chip connected to CSx */
#else
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#define CONFIG_SYS_NOR_CS 3 /* NOR chip connected to CSx */
#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
#endif
diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h
index 53a2580..1153f11 100644
--- a/include/configs/cm-bf561.h
+++ b/include/configs/cm-bf561.h
@@ -60,8 +60,13 @@
* Network Settings
*/
#define ADI_CMDS_NETWORK 1
+/* The next 2 lines are for use with DEV-BF5xx */
#define CONFIG_DRIVER_SMC91111 1
#define CONFIG_SMC91111_BASE 0x28000300
+/* The next 3 lines are for use with EXT-BF5xx-USB-ETH2 */
+/* #define CONFIG_DRIVER_SMC911X 1 */
+/* #define CONFIG_DRIVER_SMC911X_BASE 0x24080000 // AMS1 */
+/* #define CONFIG_DRIVER_SMC911X_32_BIT 1 */
#define CONFIG_HOSTNAME cm-bf561
/* Uncomment next line to use fixed MAC address */
/* #define CONFIG_ETHADDR 02:80:ad:20:31:cf */
diff --git a/include/configs/espt.h b/include/configs/espt.h
new file mode 100644
index 0000000..2ec907c
--- /dev/null
+++ b/include/configs/espt.h
@@ -0,0 +1,126 @@
+/*
+ * Configuation settings for the ESPT-GIGA board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ESPT_H
+#define __ESPT_H
+
+#define CONFIG_SH 1
+#define CONFIG_SH4 1
+#define CONFIG_CPU_SH7763 1
+#define CONFIG_ESPT 1
+#define __LITTLE_ENDIAN 1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySC0,115200 root=1f01"
+#define CONFIG_ENV_OVERWRITE 1
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_CONS_SCIF0 1
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE 512 /* Buffer size for Boot Arguments
+ passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 } /* List of legal baudrate
+ settings for this board */
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE (0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Flash(NOR) S29JL064H */
+#define CONFIG_SYS_FLASH_BASE (0xA0000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT (150)
+
+/* U-boot setting */
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN (128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#undef CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
+/* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef CONFIG_SYS_FLASH_PROTECTION
+#undef CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+
+/* Clock */
+#define CONFIG_SYS_CLK_FREQ 66666666
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+
+/* Ether */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT (1)
+#define CONFIG_SH_ETHER_PHY_ADDR (0x00)
+
+#endif /* __SH7763RDP_H */
diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h
index 86f6a93..0a472a6 100644
--- a/include/configs/mpr2.h
+++ b/include/configs/mpr2.h
@@ -82,8 +82,8 @@
/* Clocks */
#define CONFIG_SYS_CLK_FREQ 24000000
-#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
/* UART */
#define CONFIG_SCIF_CONSOLE 1
diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h
index 9a88ec7..ba0a3f8 100644
--- a/include/configs/ms7720se.h
+++ b/include/configs/ms7720se.h
@@ -101,8 +101,8 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER 4 /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
/* PCMCIA */
#define CONFIG_IDE_PCMCIA 1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 53ffbee..6755af3 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -128,7 +128,7 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
#endif /* __MS7722SE_H */
diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h
index 5eed3ab..8c06bf2 100644
--- a/include/configs/ms7750se.h
+++ b/include/configs/ms7750se.h
@@ -101,7 +101,7 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER 4
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
#endif /* __MS7750SE_H */
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 6fa1eaf..25f5012 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -80,8 +80,8 @@
* SuperH Clock setting
*/
#define CONFIG_SYS_CLK_FREQ 60000000
-#define TMU_CLK_DIVIDER 4
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_PLL_SETTLING_TIME 100/* in us */
/*
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 88eb568..7738a17 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -121,8 +121,8 @@
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 33333333
-#define TMU_CLK_DIVIDER 4
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
/* PCI Controller */
#if defined(CONFIG_CMD_PCI)
@@ -144,6 +144,9 @@
#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
+#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
#endif /* CONFIG_CMD_PCI */
#if defined(CONFIG_CMD_NET)
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index 8d7456e..c8c62ad 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -114,8 +114,8 @@
/* Clock */
#define CONFIG_SYS_CLK_FREQ 66666666
-#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CONFIG_SYS_HZ 1000
/* Ether */
#define CONFIG_NET_MULTI 1
diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h
index 21c3f70..2c18e2f 100644
--- a/include/configs/sh7785lcr.h
+++ b/include/configs/sh7785lcr.h
@@ -186,7 +186,7 @@
/* Board Clock */
/* The SCIF used external clock. system clock only used timer. */
#define CONFIG_SYS_CLK_FREQ 50000000
-#define TMU_CLK_DIVIDER 4
-#define CONFIG_SYS_HZ (CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
#endif /* __SH7785LCR_H */
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index cac58cf..018f576 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -209,6 +209,9 @@
/* total memory available to uboot */
#define CONFIG_SYS_UBOOT_SIZE (1024 * 1024)
+/* Put environment copies after the end of U-Boot owned RAM */
+#define CONFIG_NAND_ENV_DST (CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE)
+
#ifdef CONFIG_ENABLE_MMU
#define CONFIG_SYS_MAPPED_RAM_BASE 0xc0000000
#define CONFIG_BOOTCOMMAND "nand read 0xc0018000 0x60000 0x1c0000;" \
diff --git a/include/nand.h b/include/nand.h
index 065a42c..23f3ca1 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -38,22 +38,22 @@ typedef struct mtd_info nand_info_t;
extern int nand_curr_device;
extern nand_info_t nand_info[];
-static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf)
+static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
{
return info->read(info, ofs, *len, (size_t *)len, buf);
}
-static inline int nand_write(nand_info_t *info, off_t ofs, size_t *len, u_char *buf)
+static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
{
return info->write(info, ofs, *len, (size_t *)len, buf);
}
-static inline int nand_block_isbad(nand_info_t *info, off_t ofs)
+static inline int nand_block_isbad(nand_info_t *info, loff_t ofs)
{
return info->block_isbad(info, ofs);
}
-static inline int nand_erase(nand_info_t *info, off_t off, size_t size)
+static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
{
struct erase_info instr;
@@ -110,9 +110,9 @@ struct nand_erase_options {
typedef struct nand_erase_options nand_erase_options_t;
-int nand_read_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
u_char *buffer);
-int nand_write_skip_bad(nand_info_t *nand, size_t offset, size_t *length,
+int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
u_char *buffer);
int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
@@ -122,7 +122,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts);
int nand_lock( nand_info_t *meminfo, int tight );
int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
-int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
+int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 1140561..3b99456 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -85,7 +85,7 @@
#define MPC83XX_SCCR_USB_DRCM_01 0x00100000
#define MPC83XX_SCCR_USB_DRCM_10 0x00200000
-#if defined(CONFIG_MPC83XX)
+#if defined(CONFIG_MPC83xx)
#define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC83xx_USB_ADDR
#elif defined(CONFIG_MPC85xx)
#define CONFIG_SYS_MPC8xxx_USB_ADDR CONFIG_SYS_MPC85xx_USB_ADDR
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index e32ecc9..4bdf6d3 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -40,6 +40,7 @@ COBJS-y += board.o
COBJS-y += boot.o
COBJS-y += cache.o
COBJS-y += clocks.o
+COBJS-$(CONFIG_CMD_CACHE_DUMP) += cmd_cache_dump.o
COBJS-y += muldi3.o
COBJS-$(CONFIG_POST) += post.o tests.o
COBJS-y += string.o
diff --git a/lib_blackfin/cmd_cache_dump.c b/lib_blackfin/cmd_cache_dump.c
new file mode 100644
index 0000000..de5840e
--- /dev/null
+++ b/lib_blackfin/cmd_cache_dump.c
@@ -0,0 +1,145 @@
+/*
+ * U-boot - cmd_cache_dump.c
+ *
+ * Copyright (c) 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <command.h>
+
+#include <asm/blackfin.h>
+#include <asm/mach-common/bits/mpu.h>
+
+static int check_limit(const char *type, size_t start_limit, size_t end_limit, size_t start, size_t end)
+{
+ if (start >= start_limit && start <= end_limit && \
+ end <= end_limit && end >= start_limit && \
+ start <= end)
+ return 0;
+
+ printf("%s limit violation: %zu <= (user:%zu) <= (user:%zu) <= %zu\n",
+ type, start_limit, start, end, end_limit);
+ return 1;
+}
+
+int do_icache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int cache_status = icache_status();
+
+ if (cache_status)
+ icache_disable();
+
+ uint32_t cmd_base, tag, cache_upper, cache_lower;
+
+ size_t way, way_start = 0, way_end = 3;
+ size_t sbnk, sbnk_start = 0, sbnk_end = 3;
+ size_t set, set_start = 0, set_end = 31;
+ size_t dw;
+
+ if (argc > 1) {
+ way_start = way_end = simple_strtoul(argv[1], NULL, 10);
+ if (argc > 2) {
+ sbnk_start = sbnk_end = simple_strtoul(argv[2], NULL, 10);
+ if (argc > 3)
+ set_start = set_end = simple_strtoul(argv[3], NULL, 10);
+ }
+ }
+
+ if (check_limit("way", 0, 3, way_start, way_end) || \
+ check_limit("subbank", 0, 3, sbnk_start, sbnk_end) || \
+ check_limit("set", 0, 31, set_start, set_end))
+ return 1;
+
+ puts("Way:Subbank:Set: [valid-tag lower upper] {invalid-tag lower upper}...\n");
+
+ for (way = way_start; way <= way_end; ++way) {
+ for (sbnk = sbnk_start; sbnk <= sbnk_end; ++sbnk) {
+ for (set = set_start; set <= set_end; ++set) {
+ printf("%zu:%zu:%2zu: ", way, sbnk, set);
+ for (dw = 0; dw < 4; ++dw) {
+ if (ctrlc())
+ return 1;
+
+ cmd_base = \
+ (way << 26) | \
+ (sbnk << 16) | \
+ (set << 5) | \
+ (dw << 3);
+
+ /* first read the tag */
+ bfin_write_ITEST_COMMAND(cmd_base | 0x0);
+ SSYNC();
+ tag = bfin_read_ITEST_DATA0();
+ printf("%c%08x ", (tag & 0x1 ? ' ' : '{'), tag);
+
+ /* grab the data at this loc */
+ bfin_write_ITEST_COMMAND(cmd_base | 0x4);
+ SSYNC();
+ cache_lower = bfin_read_ITEST_DATA0();
+ cache_upper = bfin_read_ITEST_DATA1();
+ printf("%08x %08x%c ", cache_lower, cache_upper, (tag & 0x1 ? ' ' : '}'));
+ }
+ puts("\n");
+ }
+ }
+ }
+
+ if (cache_status)
+ icache_enable();
+
+ return 0;
+}
+
+U_BOOT_CMD(icache_dump, 4, 0, do_icache_dump,
+ "icache_dump - dump current instruction cache\n",
+ "[way] [subbank] [set]");
+
+int do_dcache_dump(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ u32 way, bank, subbank, set;
+ u32 status, addr;
+ u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+ for (bank = 0; bank < 2; ++bank) {
+ if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+ continue;
+
+ for (way = 0; way < 2; ++way)
+ for (subbank = 0; subbank < 4; ++subbank) {
+ printf("%i:%i:%i:\t", bank, way, subbank);
+ for (set = 0; set < 64; ++set) {
+
+ if (ctrlc())
+ return 1;
+
+ /* retrieve a cache tag */
+ bfin_write_DTEST_COMMAND(
+ way << 26 |
+ bank << 23 |
+ subbank << 16 |
+ set << 5
+ );
+ CSYNC();
+ status = bfin_read_DTEST_DATA0();
+
+ /* construct the address using the tag */
+ addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+ /* show it */
+ if (set && !(set % 4))
+ puts("\n\t");
+ printf("%c%08x%c%08x%c ", (status & 0x1 ? '[' : '{'), status, (status & 0x2 ? 'd' : ' '), addr, (status & 0x1 ? ']' : '}'));
+ }
+ puts("\n");
+ }
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(dcache_dump, 4, 0, do_dcache_dump,
+ "dcache_dump - dump current data cache\n",
+ "[bank] [way] [subbank] [set]");
diff --git a/lib_sh/time.c b/lib_sh/time.c
index 8fccce3..52dbcd0 100644
--- a/lib_sh/time.c
+++ b/lib_sh/time.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2009
+ * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
* (C) Copyright 2007-2008
* Nobobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
@@ -25,11 +28,30 @@
*/
#include <common.h>
+#include <div64.h>
#include <asm/processor.h>
+#include <asm/clk.h>
#include <asm/io.h>
#define TMU_MAX_COUNTER (~0UL)
-static int clk_adj = 1;
+
+static ulong timer_freq;
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, timer_freq);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= timer_freq;
+ do_div(usec, 1000000);
+
+ return usec;
+}
static void tmu_timer_start (unsigned int timer)
{
@@ -47,10 +69,10 @@ static void tmu_timer_stop (unsigned int timer)
int timer_init (void)
{
- /* Divide clock by TMU_CLK_DIVIDER */
+ /* Divide clock by CONFIG_SYS_TMU_CLK_DIV */
u16 bit = 0;
- switch (TMU_CLK_DIVIDER) {
+ switch (CONFIG_SYS_TMU_CLK_DIV) {
case 1024:
bit = 4;
break;
@@ -65,15 +87,12 @@ int timer_init (void)
break;
case 4:
default:
- bit = 0;
break;
}
writew(readw(TCR0) | bit, TCR0);
- /* Clock adjustment calc */
- clk_adj = (int)(1.0 / ((1.0 / CONFIG_SYS_HZ) * 1000000));
- if (clk_adj < 1)
- clk_adj = 1;
+ /* Calc clock rate */
+ timer_freq = get_tmu0_clk_rate() >> ((bit + 1) * 2);
tmu_timer_stop(0);
tmu_timer_start(0);
@@ -86,24 +105,22 @@ unsigned long long get_ticks (void)
return 0 - readl(TCNT0);
}
-static unsigned long get_usec (void)
-{
- return (0 - readl(TCNT0));
-}
-
void udelay (unsigned long usec)
{
- unsigned int start = get_usec();
- unsigned int end = start + (usec * clk_adj);
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = usec_to_tick(usec);
+ tmp = get_ticks() + tmo; /* get current timestamp */
- while (get_usec() < end)
- continue;
+ while (get_ticks() < tmp) /* loop till event */
+ /*NOP*/;
}
unsigned long get_timer (unsigned long base)
{
/* return msec */
- return ((get_usec() / clk_adj) / 1000) - base;
+ return tick_to_time(get_ticks()) - base;
}
void set_timer (unsigned long t)
@@ -120,5 +137,5 @@ void reset_timer (void)
unsigned long get_tbclk (void)
{
- return CONFIG_SYS_HZ;
+ return timer_freq;
}
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
index c7eadad..b9fd6f5 100644
--- a/nand_spl/nand_boot.c
+++ b/nand_spl/nand_boot.c
@@ -47,11 +47,13 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
/* Set ALE and clear CLE to start address cycle */
/* Column address */
this->cmd_ctrl(mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
- this->cmd_ctrl(mtd, page_addr & 0xff, 0); /* A[16:9] */
- this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff, 0); /* A[24:17] */
+ this->cmd_ctrl(mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
+ this->cmd_ctrl(mtd, (page_addr >> 8) & 0xff,
+ NAND_CTRL_ALE); /* A[24:17] */
#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
/* One more address cycle for devices > 32MiB */
- this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[28:25] */
+ this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[28:25] */
#endif
/* Latch in address */
this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
@@ -94,13 +96,15 @@ static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8
/* Column address */
this->cmd_ctrl(mtd, offs & 0xff,
NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
- this->cmd_ctrl(mtd, (offs >> 8) & 0xff, 0); /* A[11:9] */
+ this->cmd_ctrl(mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
/* Row address */
- this->cmd_ctrl(mtd, (page_addr & 0xff), 0); /* A[19:12] */
- this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff), 0); /* A[27:20] */
+ this->cmd_ctrl(mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+ this->cmd_ctrl(mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE); /* A[27:20] */
#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
/* One more address cycle for devices > 128MiB */
- this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f, 0); /* A[31:28] */
+ this->cmd_ctrl(mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[31:28] */
#endif
/* Latch in address */
this->cmd_ctrl(mtd, NAND_CMD_READSTART,
@@ -246,6 +250,16 @@ void nand_boot(void)
ret = nand_load(&nand_info, CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+#ifdef CONFIG_NAND_ENV_DST
+ nand_load(&nand_info, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_NAND_ENV_DST);
+
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ nand_load(&nand_info, CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
+#endif
+#endif
+
if (nand_chip.select_chip)
nand_chip.select_chip(&nand_info, -1);
diff --git a/sh_config.mk b/sh_config.mk
index 49d50f7..407e076 100644
--- a/sh_config.mk
+++ b/sh_config.mk
@@ -22,3 +22,6 @@
#
PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
+PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+
+LDSCRIPT := $(SRCTREE)/cpu/$(CPU)/u-boot.lds