summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/eth/mcs7830.c265
1 files changed, 144 insertions, 121 deletions
diff --git a/drivers/usb/eth/mcs7830.c b/drivers/usb/eth/mcs7830.c
index bbdad8b..de40bd6 100644
--- a/drivers/usb/eth/mcs7830.c
+++ b/drivers/usb/eth/mcs7830.c
@@ -89,13 +89,13 @@ struct mcs7830_private {
/*
* mcs7830_read_reg() - read a register of the network adapter
- * @dev: network device to read from
+ * @udev: network device to read from
* @idx: index of the register to start reading from
* @size: number of bytes to read
* @data: buffer to read into
* Return: zero upon success, negative upon error
*/
-static int mcs7830_read_reg(struct ueth_data *dev, uint8_t idx,
+static int mcs7830_read_reg(struct usb_device *udev, uint8_t idx,
uint16_t size, void *data)
{
int len;
@@ -103,8 +103,8 @@ static int mcs7830_read_reg(struct ueth_data *dev, uint8_t idx,
debug("%s() idx=0x%04X sz=%d\n", __func__, idx, size);
- len = usb_control_msg(dev->pusb_dev,
- usb_rcvctrlpipe(dev->pusb_dev, 0),
+ len = usb_control_msg(udev,
+ usb_rcvctrlpipe(udev, 0),
MCS7830_RD_BREQ,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, idx, buf, size,
@@ -119,13 +119,13 @@ static int mcs7830_read_reg(struct ueth_data *dev, uint8_t idx,
/*
* mcs7830_write_reg() - write a register of the network adapter
- * @dev: network device to write to
+ * @udev: network device to write to
* @idx: index of the register to start writing to
* @size: number of bytes to write
* @data: buffer holding the data to write
* Return: zero upon success, negative upon error
*/
-static int mcs7830_write_reg(struct ueth_data *dev, uint8_t idx,
+static int mcs7830_write_reg(struct usb_device *udev, uint8_t idx,
uint16_t size, void *data)
{
int len;
@@ -134,8 +134,8 @@ static int mcs7830_write_reg(struct ueth_data *dev, uint8_t idx,
debug("%s() idx=0x%04X sz=%d\n", __func__, idx, size);
memcpy(buf, data, size);
- len = usb_control_msg(dev->pusb_dev,
- usb_sndctrlpipe(dev->pusb_dev, 0),
+ len = usb_control_msg(udev,
+ usb_sndctrlpipe(udev, 0),
MCS7830_WR_BREQ,
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0, idx, buf, size,
@@ -149,12 +149,12 @@ static int mcs7830_write_reg(struct ueth_data *dev, uint8_t idx,
/*
* mcs7830_phy_emit_wait() - emit PHY read/write access, wait for its execution
- * @dev: network device to talk to
+ * @udev: network device to talk to
* @rwflag: PHY_CMD1_READ or PHY_CMD1_WRITE opcode
* @index: number of the PHY register to read or write
* Return: zero upon success, negative upon error
*/
-static int mcs7830_phy_emit_wait(struct ueth_data *dev,
+static int mcs7830_phy_emit_wait(struct usb_device *udev,
uint8_t rwflag, uint8_t index)
{
int rc;
@@ -164,14 +164,14 @@ static int mcs7830_phy_emit_wait(struct ueth_data *dev,
/* send the PHY read/write request */
cmd[0] = rwflag | PHY_CMD1_PHYADDR;
cmd[1] = PHY_CMD2_PEND | (index & 0x1f);
- rc = mcs7830_write_reg(dev, REG_PHY_CMD, sizeof(cmd), cmd);
+ rc = mcs7830_write_reg(udev, REG_PHY_CMD, sizeof(cmd), cmd);
if (rc < 0)
return rc;
/* wait for the response to become available (usually < 1ms) */
retry = 10;
do {
- rc = mcs7830_read_reg(dev, REG_PHY_CMD, sizeof(cmd), cmd);
+ rc = mcs7830_read_reg(udev, REG_PHY_CMD, sizeof(cmd), cmd);
if (rc < 0)
return rc;
if (cmd[1] & PHY_CMD2_READY)
@@ -185,50 +185,51 @@ static int mcs7830_phy_emit_wait(struct ueth_data *dev,
/*
* mcs7830_read_phy() - read a PHY register of the network adapter
- * @dev: network device to read from
+ * @udev: network device to read from
* @index: index of the PHY register to read from
* Return: non-negative 16bit register content, negative upon error
*/
-static int mcs7830_read_phy(struct ueth_data *dev, uint8_t index)
+static int mcs7830_read_phy(struct usb_device *udev, uint8_t index)
{
int rc;
uint16_t val;
/* issue the PHY read request and wait for its execution */
- rc = mcs7830_phy_emit_wait(dev, PHY_CMD1_READ, index);
+ rc = mcs7830_phy_emit_wait(udev, PHY_CMD1_READ, index);
if (rc < 0)
return rc;
/* fetch the PHY data which was read */
- rc = mcs7830_read_reg(dev, REG_PHY_DATA, sizeof(val), &val);
+ rc = mcs7830_read_reg(udev, REG_PHY_DATA, sizeof(val), &val);
if (rc < 0)
return rc;
rc = le16_to_cpu(val);
- debug("%s(%s, %d) => 0x%04X\n", __func__, dev->eth_dev.name, index, rc);
+ debug("%s(%d) => 0x%04X\n", __func__, index, rc);
return rc;
}
/*
* mcs7830_write_phy() - write a PHY register of the network adapter
- * @dev: network device to write to
+ * @udev: network device to write to
* @index: index of the PHY register to write to
* @val: value to write to the PHY register
* Return: zero upon success, negative upon error
*/
-static int mcs7830_write_phy(struct ueth_data *dev, uint8_t index, uint16_t val)
+static int mcs7830_write_phy(struct usb_device *udev, uint8_t index,
+ uint16_t val)
{
int rc;
- debug("%s(%s, %d, 0x%04X)\n", __func__, dev->eth_dev.name, index, val);
+ debug("%s(%d, 0x%04X)\n", __func__, index, val);
/* setup the PHY data which is to get written */
val = cpu_to_le16(val);
- rc = mcs7830_write_reg(dev, REG_PHY_DATA, sizeof(val), &val);
+ rc = mcs7830_write_reg(udev, REG_PHY_DATA, sizeof(val), &val);
if (rc < 0)
return rc;
/* issue the PHY write request and wait for its execution */
- rc = mcs7830_phy_emit_wait(dev, PHY_CMD1_WRITE, index);
+ rc = mcs7830_phy_emit_wait(udev, PHY_CMD1_WRITE, index);
if (rc < 0)
return rc;
@@ -237,21 +238,21 @@ static int mcs7830_write_phy(struct ueth_data *dev, uint8_t index, uint16_t val)
/*
* mcs7830_write_config() - write to the network adapter's config register
- * @eth: network device to write to
+ * @udev: network device to write to
+ * @priv: private data
* Return: zero upon success, negative upon error
*
* the data which gets written is taken from the shadow config register
* within the device driver's private data
*/
-static int mcs7830_write_config(struct ueth_data *dev)
+static int mcs7830_write_config(struct usb_device *udev,
+ struct mcs7830_private *priv)
{
- struct mcs7830_private *priv;
int rc;
debug("%s()\n", __func__);
- priv = dev->dev_priv;
- rc = mcs7830_write_reg(dev, REG_CONFIG,
+ rc = mcs7830_write_reg(udev, REG_CONFIG,
sizeof(priv->config), &priv->config);
if (rc < 0) {
debug("writing config to adapter failed\n");
@@ -263,21 +264,21 @@ static int mcs7830_write_config(struct ueth_data *dev)
/*
* mcs7830_write_mchash() - write the network adapter's multicast filter
- * @eth: network device to write to
+ * @udev: network device to write to
+ * @priv: private data
* Return: zero upon success, negative upon error
*
* the data which gets written is taken from the shadow multicast hashes
* within the device driver's private data
*/
-static int mcs7830_write_mchash(struct ueth_data *dev)
+static int mcs7830_write_mchash(struct usb_device *udev,
+ struct mcs7830_private *priv)
{
- struct mcs7830_private *priv;
int rc;
debug("%s()\n", __func__);
- priv = dev->dev_priv;
- rc = mcs7830_write_reg(dev, REG_MULTICAST_HASH,
+ rc = mcs7830_write_reg(udev, REG_MULTICAST_HASH,
sizeof(priv->mchash), &priv->mchash);
if (rc < 0) {
debug("writing multicast hash to adapter failed\n");
@@ -289,12 +290,12 @@ static int mcs7830_write_mchash(struct ueth_data *dev)
/*
* mcs7830_set_autoneg() - setup and trigger ethernet link autonegotiation
- * @eth: network device to run link negotiation on
+ * @udev: network device to run link negotiation on
* Return: zero upon success, negative upon error
*
* the routine advertises available media and starts autonegotiation
*/
-static int mcs7830_set_autoneg(struct ueth_data *dev)
+static int mcs7830_set_autoneg(struct usb_device *udev)
{
int adv, flg;
int rc;
@@ -310,39 +311,39 @@ static int mcs7830_set_autoneg(struct ueth_data *dev)
*/
adv = ADVERTISE_PAUSE_CAP | ADVERTISE_ALL | ADVERTISE_CSMA;
- rc = mcs7830_write_phy(dev, MII_ADVERTISE, adv);
+ rc = mcs7830_write_phy(udev, MII_ADVERTISE, adv);
flg = 0;
if (!rc)
- rc = mcs7830_write_phy(dev, MII_BMCR, flg);
+ rc = mcs7830_write_phy(udev, MII_BMCR, flg);
flg |= BMCR_ANENABLE;
if (!rc)
- rc = mcs7830_write_phy(dev, MII_BMCR, flg);
+ rc = mcs7830_write_phy(udev, MII_BMCR, flg);
flg |= BMCR_ANRESTART;
if (!rc)
- rc = mcs7830_write_phy(dev, MII_BMCR, flg);
+ rc = mcs7830_write_phy(udev, MII_BMCR, flg);
return rc;
}
/*
* mcs7830_get_rev() - identify a network adapter's chip revision
- * @eth: network device to identify
+ * @udev: network device to identify
* Return: non-negative number, reflecting the revision number
*
* currently, only "rev C and higher" and "below rev C" are needed, so
* the return value is #1 for "below rev C", and #2 for "rev C and above"
*/
-static int mcs7830_get_rev(struct ueth_data *dev)
+static int mcs7830_get_rev(struct usb_device *udev)
{
uint8_t buf[2];
int rc;
int rev;
/* register 22 is readable in rev C and higher */
- rc = mcs7830_read_reg(dev, REG_FRAME_DROP_COUNTER, sizeof(buf), buf);
+ rc = mcs7830_read_reg(udev, REG_FRAME_DROP_COUNTER, sizeof(buf), buf);
if (rc < 0)
rev = 1;
else
@@ -353,19 +354,19 @@ static int mcs7830_get_rev(struct ueth_data *dev)
/*
* mcs7830_apply_fixup() - identify an adapter and potentially apply fixups
- * @eth: network device to identify and apply fixups to
+ * @udev: network device to identify and apply fixups to
* Return: zero upon success (no errors emitted from here)
*
* this routine identifies the network adapter's chip revision, and applies
* fixups for known issues
*/
-static int mcs7830_apply_fixup(struct ueth_data *dev)
+static int mcs7830_apply_fixup(struct usb_device *udev)
{
int rev;
int i;
uint8_t thr;
- rev = mcs7830_get_rev(dev);
+ rev = mcs7830_get_rev(udev);
debug("%s() rev=%d\n", __func__, rev);
/*
@@ -374,10 +375,10 @@ static int mcs7830_apply_fixup(struct ueth_data *dev)
* exactly", the introductory comment says "rev C and above")
*/
if (rev == 2) {
- debug("%s: applying rev C fixup\n", dev->eth_dev.name);
+ debug("%s: applying rev C fixup\n", __func__);
thr = PAUSE_THRESHOLD_DEFAULT;
for (i = 0; i < 2; i++) {
- (void)mcs7830_write_reg(dev, REG_PAUSE_THRESHOLD,
+ (void)mcs7830_write_reg(udev, REG_PAUSE_THRESHOLD,
sizeof(thr), &thr);
mdelay(1);
}
@@ -395,13 +396,12 @@ static int mcs7830_apply_fixup(struct ueth_data *dev)
* of the interface callbacks can exchange ethernet frames; link negotiation is
* triggered from here already and continues in background
*/
-static int mcs7830_basic_reset(struct ueth_data *dev)
+static int mcs7830_basic_reset(struct usb_device *udev,
+ struct mcs7830_private *priv)
{
- struct mcs7830_private *priv;
int rc;
debug("%s()\n", __func__);
- priv = dev->dev_priv;
/*
* comment from the respective Linux driver, which
@@ -411,25 +411,25 @@ static int mcs7830_basic_reset(struct ueth_data *dev)
priv->config = CONF_TXENABLE;
priv->config |= CONF_ALLMULTICAST;
- rc = mcs7830_set_autoneg(dev);
+ rc = mcs7830_set_autoneg(udev);
if (rc < 0) {
error("setting autoneg failed\n");
return rc;
}
- rc = mcs7830_write_mchash(dev);
+ rc = mcs7830_write_mchash(udev, priv);
if (rc < 0) {
error("failed to set multicast hash\n");
return rc;
}
- rc = mcs7830_write_config(dev);
+ rc = mcs7830_write_config(udev, priv);
if (rc < 0) {
error("failed to set configuration\n");
return rc;
}
- rc = mcs7830_apply_fixup(dev);
+ rc = mcs7830_apply_fixup(udev);
if (rc < 0) {
error("fixup application failed\n");
return rc;
@@ -440,51 +440,38 @@ static int mcs7830_basic_reset(struct ueth_data *dev)
/*
* mcs7830_read_mac() - read an ethernet adapter's MAC address
- * @eth: network device to read from
+ * @udev: network device to read from
+ * @enetaddr: place to put ethernet MAC address
* Return: zero upon success, negative upon error
*
* this routine fetches the MAC address stored within the ethernet adapter,
* and stores it in the ethernet interface's data structure
*/
-static int mcs7830_read_mac(struct eth_device *eth)
+static int mcs7830_read_mac(struct usb_device *udev, unsigned char enetaddr[])
{
- struct ueth_data *dev;
int rc;
uint8_t buf[ETH_ALEN];
debug("%s()\n", __func__);
- dev = eth->priv;
- rc = mcs7830_read_reg(dev, REG_ETHER_ADDR, ETH_ALEN, buf);
+ rc = mcs7830_read_reg(udev, REG_ETHER_ADDR, ETH_ALEN, buf);
if (rc < 0) {
debug("reading MAC from adapter failed\n");
return rc;
}
- memcpy(&eth->enetaddr[0], buf, ETH_ALEN);
+ memcpy(enetaddr, buf, ETH_ALEN);
return 0;
}
-/*
- * mcs7830_write_mac() - write an ethernet adapter's MAC address
- * @eth: network device to write to
- * Return: zero upon success, negative upon error
- *
- * this routine takes the MAC address from the ethernet interface's data
- * structure, and writes it into the ethernet adapter such that subsequent
- * exchange of ethernet frames uses this address
- */
-static int mcs7830_write_mac(struct eth_device *eth)
+static int mcs7830_write_mac_common(struct usb_device *udev,
+ unsigned char enetaddr[])
{
- struct ueth_data *dev;
int rc;
debug("%s()\n", __func__);
- dev = eth->priv;
- if (sizeof(eth->enetaddr) != ETH_ALEN)
- return -EINVAL;
- rc = mcs7830_write_reg(dev, REG_ETHER_ADDR, ETH_ALEN, eth->enetaddr);
+ rc = mcs7830_write_reg(udev, REG_ETHER_ADDR, ETH_ALEN, enetaddr);
if (rc < 0) {
debug("writing MAC to adapter failed\n");
return rc;
@@ -492,28 +479,16 @@ static int mcs7830_write_mac(struct eth_device *eth)
return 0;
}
-/*
- * mcs7830_init() - network interface's init callback
- * @eth: network device to initialize
- * @bd: board information
- * Return: zero upon success, negative upon error
- *
- * after initial setup during probe() and get_info(), this init() callback
- * ensures that the link is up and subsequent send() and recv() calls can
- * exchange ethernet frames
- */
-static int mcs7830_init(struct eth_device *eth, bd_t *bd)
+static int mcs7830_init_common(struct usb_device *udev)
{
- struct ueth_data *dev;
int timeout;
int have_link;
debug("%s()\n", __func__);
- dev = eth->priv;
timeout = 0;
do {
- have_link = mcs7830_read_phy(dev, MII_BMSR) & BMSR_LSTATUS;
+ have_link = mcs7830_read_phy(udev, MII_BMSR) & BMSR_LSTATUS;
if (have_link)
break;
udelay(LINKSTATUS_TIMEOUT_RES * 1000);
@@ -526,28 +501,18 @@ static int mcs7830_init(struct eth_device *eth, bd_t *bd)
return 0;
}
-/*
- * mcs7830_send() - network interface's send callback
- * @eth: network device to send the frame from
- * @packet: ethernet frame content
- * @length: ethernet frame length
- * Return: zero upon success, negative upon error
- *
- * this routine send an ethernet frame out of the network interface
- */
-static int mcs7830_send(struct eth_device *eth, void *packet, int length)
+static int mcs7830_send_common(struct ueth_data *ueth, void *packet,
+ int length)
{
- struct ueth_data *dev;
+ struct usb_device *udev = ueth->pusb_dev;
int rc;
int gotlen;
/* there is a status byte after the ethernet frame */
ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, PKTSIZE + sizeof(uint8_t));
- dev = eth->priv;
-
memcpy(buf, packet, length);
- rc = usb_bulk_msg(dev->pusb_dev,
- usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
+ rc = usb_bulk_msg(udev,
+ usb_sndbulkpipe(udev, ueth->ep_out),
&buf[0], length, &gotlen,
USBCALL_TIMEOUT);
debug("%s() TX want len %d, got len %d, rc %d\n",
@@ -555,28 +520,17 @@ static int mcs7830_send(struct eth_device *eth, void *packet, int length)
return rc;
}
-/*
- * mcs7830_recv() - network interface's recv callback
- * @eth: network device to receive frames from
- * Return: zero upon success, negative upon error
- *
- * this routine checks for available ethernet frames that the network
- * interface might have received, and notifies the network stack
- */
-static int mcs7830_recv(struct eth_device *eth)
+static int mcs7830_recv_common(struct ueth_data *ueth, uint8_t *buf)
{
- struct ueth_data *dev;
- ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, MCS7830_RX_URB_SIZE);
int rc, wantlen, gotlen;
uint8_t sts;
debug("%s()\n", __func__);
- dev = eth->priv;
/* fetch input data from the adapter */
wantlen = MCS7830_RX_URB_SIZE;
- rc = usb_bulk_msg(dev->pusb_dev,
- usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
+ rc = usb_bulk_msg(ueth->pusb_dev,
+ usb_rcvbulkpipe(ueth->pusb_dev, ueth->ep_in),
&buf[0], wantlen, &gotlen,
USBCALL_TIMEOUT);
debug("%s() RX want len %d, got len %d, rc %d\n",
@@ -601,8 +555,7 @@ static int mcs7830_recv(struct eth_device *eth)
if (sts == STAT_RX_FRAME_CORRECT) {
debug("%s() got a frame, len=%d\n", __func__, gotlen);
- net_process_received_packet(buf, gotlen);
- return 0;
+ return gotlen;
}
debug("RX: frame error (sts 0x%02X, %s %s %s %s %s)\n",
@@ -616,6 +569,60 @@ static int mcs7830_recv(struct eth_device *eth)
}
/*
+ * mcs7830_init() - network interface's init callback
+ * @udev: network device to initialize
+ * @bd: board information
+ * Return: zero upon success, negative upon error
+ *
+ * after initial setup during probe() and get_info(), this init() callback
+ * ensures that the link is up and subsequent send() and recv() calls can
+ * exchange ethernet frames
+ */
+static int mcs7830_init(struct eth_device *eth, bd_t *bd)
+{
+ struct ueth_data *dev = eth->priv;
+
+ return mcs7830_init_common(dev->pusb_dev);
+}
+
+/*
+ * mcs7830_send() - network interface's send callback
+ * @eth: network device to send the frame from
+ * @packet: ethernet frame content
+ * @length: ethernet frame length
+ * Return: zero upon success, negative upon error
+ *
+ * this routine send an ethernet frame out of the network interface
+ */
+static int mcs7830_send(struct eth_device *eth, void *packet, int length)
+{
+ struct ueth_data *dev = eth->priv;
+
+ return mcs7830_send_common(dev, packet, length);
+}
+
+/*
+ * mcs7830_recv() - network interface's recv callback
+ * @eth: network device to receive frames from
+ * Return: zero upon success, negative upon error
+ *
+ * this routine checks for available ethernet frames that the network
+ * interface might have received, and notifies the network stack
+ */
+static int mcs7830_recv(struct eth_device *eth)
+{
+ ALLOC_CACHE_ALIGN_BUFFER(uint8_t, buf, MCS7830_RX_URB_SIZE);
+ struct ueth_data *ueth = eth->priv;
+ int len;
+
+ len = mcs7830_recv_common(ueth, buf);
+ if (len <= 0)
+ net_process_received_packet(buf, len);
+
+ return 0;
+}
+
+/*
* mcs7830_halt() - network interface's halt callback
* @eth: network device to cease operation of
* Return: none
@@ -629,6 +636,22 @@ static void mcs7830_halt(struct eth_device *eth)
}
/*
+ * mcs7830_write_mac() - write an ethernet adapter's MAC address
+ * @eth: network device to write to
+ * Return: zero upon success, negative upon error
+ *
+ * this routine takes the MAC address from the ethernet interface's data
+ * structure, and writes it into the ethernet adapter such that subsequent
+ * exchange of ethernet frames uses this address
+ */
+static int mcs7830_write_mac(struct eth_device *eth)
+{
+ struct ueth_data *ueth = eth->priv;
+
+ return mcs7830_write_mac_common(ueth->pusb_dev, eth->enetaddr);
+}
+
+/*
* mcs7830_iface_idx - index of detected network interfaces
*
* this counter keeps track of identified supported interfaces,
@@ -802,10 +825,10 @@ int mcs7830_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
eth->write_hwaddr = mcs7830_write_mac;
eth->priv = ss;
- if (mcs7830_basic_reset(ss))
+ if (mcs7830_basic_reset(ss->pusb_dev, ss->dev_priv))
return 0;
- if (mcs7830_read_mac(eth))
+ if (mcs7830_read_mac(ss->pusb_dev, eth->enetaddr))
return 0;
debug("MAC %pM\n", eth->enetaddr);